Merge pull request #25 from phdlee/version1.06

Change Version Name

README.md

@@ -1,11 +1,124 @@
+#IMPORTANT INFORMATION
+----------------------------------------------------------------------------
+- A bug was found in version 1.0, When CW Keytype is set to IAMBCA and IAMBCB, there was a problem that switching to RX is not performed well when CAT communication is performed. If CW key type is straight, it works normally. This bug has been fixed and changed to version 1.01.
+- Now Release Version 1.01 on my blog (http://www.hamskey.com)
+- You can download and compiled hex file and uBITX Manager application on my blog (http://www.hamskey.com)
+
+#NOTICE
+----------------------------------------------------------------------------
+I received uBITX a month ago and found that many features are required, and began coding with the idea of implementing minimal functionality as a general hf transceiver rather than an experimental device.
+
+Most of the basic functions of the HF transceiver I thought were implemented.
+The minimum basic specification for uBITX to operate as a radio, I think it is finished.
+So I will release the 0.27 version and if I do not see the bug anymore, I will try to change the version name to 1.0.
+Now uBITX is an HF radio and will be able to join you in your happy hams life.
+Based on this source, you can use it by adding functions.
+
+I am going to do a new project based on this source, linking with WSPR, WSJT-X and so on.
+Of course, this repository is still running. If you have any bugs or ideas, please feel free to email me.
+
+http://www.hamskey.com
+
+DE KD8CEC
+kd8cec@gmail.com
+
 #uBITX
 uBITX firmware, written for the Raduino/Arduino control of uBITX transceivers
 This project is based on https://github.com/afarhan/ubitx and all copyright is inherited.
 The copyright information of the original is below.
 
 KD8CEC
+----------------------------------------------------------------------------
+Prepared or finished tasks for the next version
+  - Include WSPR Beacone function - (implement other new repository)
+    complete experiment
+    need solve : Big code size (over 100%, then remove some functions for experment)
+                 need replace Si5351 Library (increase risk and need more beta tester)
+                 W3PM sent me his wonderful source - using BITX, GPS 
+                  
 ----------------------------------------------------------------------------
 ## REVISION RECORD
+1.04
+  - Optimized from Version1.03
+  - Reduce program size (97% -> 95%)
+  
+1.03
+  - Change eBFO Calibration Step (50 to 5)
+  - Change CW Frequency Display type
+  
+1.02
+  - Applied CW Start Delay to New CW Key logic (This is my mistake when applying the new CW Key Logic.Since uBITX operations are not significantly affected, this does not create a separate Release, It will be reflected in the next release.) - complete
+  - Modified CW Key Logic for Auto Key, (available AutoKey function by any cw keytype) - complete
+  - reduce cpu use usage (working)
+  - reduce (working)
+
+1.01
+  - Fixed Cat problem with (IAMBIC A or B Selected)
+1.0 
+  - rename 0.30 to 1.0
+  
+0.35
+  - vfo to channel bug fixed (not saved mode -> fixed, channel has frequency and mode)
+  - add Channel tag (ch.1 ~ 10) by uBITX Manager
+  - add VFO to Channel, Channel To VFO
+  
+0.34
+  - TX Status check in auto Keysend logic
+  - optimize codes
+  - change default tune step size, and fixed bug
+  - change IF shift step (1Hz -> 50Hz)
+  
+0.33
+  - Added CWL, CWU Mode, (dont complete test yet)
+  - fixed VFO changed bug.
+  - Added Additional BFO for CWL, CWL
+  - Added IF Shift
+  - Change confirmation key PTT -> function key (not critical menus)
+  - Change CW Key Select type, (toggle -> select by dial)
+  
+0.32
+  - Added function Scroll Frequencty on upper line
+  - Added Example code for Draw meter and remarked (you can see and use this code in source codes)
+  - Added Split function, just toggle VFOs when TX/RX
+
+0.31
+  - Fixed CW ADC Range error
+  - Display Message on Upper Line (anothor VFO Frequency, Tune Step, Selected Key Type)
+
+0.30
+ - implemented the function to monitor the value of all analog inputs. This allows you to monitor the status of the CW keys connected to your uBITX. 
+ - possible to set the ADC range for CW Keying. If no setting is made, it will have the same range as the original code. If you set the CW Keying ADC Values using uBITX Manager 0.3, you can reduce the key error.
+ - Added the function to select Straight Key, IAMBICA, IAMBICB key from the menu.
+ - default Band select is Ham Band mode, if you want common type, long press function key at band select menu, uBITX Manager can be used to modify frequencies to suit your country.
+
+0.29
+ - Remove the use of initialization values in BFO settings - using crruent value, if factory reset
+ - Select Tune Step, default 0, 20, 50, 100, 200, Use the uBITX Manager to set the steps value you want. You can select Step by pressing and holding the Function Key (1sec ~ 2sec).
+ - Modify Dial Lock Function, Press the Function key for more than 3 seconds to toggle dial lock.
+ - created a new frequency tune method. remove original source codes, Threshold has been applied to reduce malfunction. checked the continuity of the user operating to make natural tune possible.
+ - stabilize and remove many warning messages - by Pullrequest and merge
+ - Changed cw keying method. removed the original code and applied Ron's code and Improved compatibility with original hardware and CAT commnication. It can be used without modification of hardware.
+ 
+0.28
+ - Fixed CAT problem with hamlib on Linux
+ - restore Protocol autorecovery logic
+
+0.27 
+   (First alpha test version, This will be renamed to the major version 1.0)
+ - Dual VFO Dial Lock (vfoA Dial lock)
+ - Support Ham band on uBITX
+   default Hamband is regeion1 but customize by uBITX Manager Software
+ - Advanced ham band options (Tx control) for use in all countries. You can adjust it yourself.   
+ - Convenience of band movement
+
+0.26
+  - only Beta tester released & source code share
+  - find a bug on none initial eeprom uBITX - Fixed (Check -> initialized & compatible original source code)
+  - change the version number 0.26 -> 0.27
+  - Prevent overflow bugs
+  - bug with linux based Hamlib (raspberry pi), It was perfect for the 0.224 version, but there was a problem for the 0.25 version.  
+    On Windows, ham deluxe, wsjt-x, jt65-hf, and fldigi were successfully run. Problem with Raspberry pi.
+
 0.25
   - Beta Version Released
     http://www.hamskey.com/2018/01/release-beta-version-of-cat-support.html

ubitx_20/cat_libs.ino

@@ -1,4 +1,5 @@
 /*************************************************************************
+  KD8CEC's CAT Library for uBITX and HAM
   This source code is written for uBITX, but it can also be used on other radios.
   
   The CAT protocol is used by many radios to provide remote control to comptuers through
@@ -108,7 +109,8 @@ void CatSetFreq(byte fromType)
 //#define BCD_LEN 9
 //PROTOCOL : 0x03
 //Computer <-(frequency)-> TRCV CAT_BUFF
-void CatGetFreqMode(unsigned long freq, byte fromType)
+//void CatGetFreqMode(unsigned long freq, byte fromType)
+void CatGetFreqMode(unsigned long freq) //for remove warning messages
 {
   int i;
   byte tmpValue;
@@ -129,23 +131,40 @@ void CatGetFreqMode(unsigned long freq, byte fromType)
   }
 
   //Mode Check
-  if (isUSB)
-    CAT_BUFF[4] = CAT_MODE_USB;
+  if (cwMode == 0)
+  {
+    if (isUSB)
+      CAT_BUFF[4] = CAT_MODE_USB;
+    else
+      CAT_BUFF[4] = CAT_MODE_LSB;
+  }
+  else if (cwMode == 1)
+  {
+      CAT_BUFF[4] = CAT_MODE_CW;
+  }
   else
-    CAT_BUFF[4] = CAT_MODE_LSB;
+  {
+      CAT_BUFF[4] = CAT_MODE_CW;
+  }
 
   SendCatData(5);
 }
 
-void CatSetSplit(boolean isSplit, byte fromType)
+//void CatSetSplit(boolean isSplit, byte fromType)
+void CatSetSplit(boolean isSplit) //for remove warning messages
 {
-
+  if (isSplit)
+    splitOn = 1;
+  else
+    splitOn = 0;
+    
   Serial.write(ACK);
 }
 
 void CatSetPTT(boolean isPTTOn, byte fromType)
 {
-  if (fromType == 2 || fromType == 3) {
+  //
+  if ((!inTx) && (fromType == 2 || fromType == 3)) {
     Serial.write(ACK);  
     return;  
   }
@@ -197,12 +216,18 @@ void CatSetMode(byte tmpMode, byte fromType)
   
   if (!inTx)
   {
-    if (tmpMode == CAT_MODE_USB)
+    if (tmpMode == CAT_MODE_CW)
     {
+      cwMode = 1;
+    }
+    else if (tmpMode == CAT_MODE_USB)
+    {
+      cwMode = 0;
       isUSB = true;
     }
     else
     {
+      cwMode = 0;
       isUSB = false;
     }
 
@@ -214,7 +239,8 @@ void CatSetMode(byte tmpMode, byte fromType)
 }
 
 //Read EEProm by uBITX Manager Software
-void ReadEEPRom(byte fromType)
+//void ReadEEPRom(byte fromType)
+void ReadEEPRom() //for remove warnings.
 {
   //5BYTES
   //CAT_BUFF[0] [1] [2] [3] [4] //4 COMMAND
@@ -237,7 +263,8 @@ void ReadEEPRom(byte fromType)
 }
 
 //Write just proecess 1byes
-void WriteEEPRom(byte fromType)
+//void WriteEEPRom(byte fromType)
+void WriteEEPRom(void)  //for remove warning
 {
   //5BYTES
   uint16_t eepromStartIndex = CAT_BUFF[0] + CAT_BUFF[1] * 256;
@@ -257,7 +284,8 @@ void WriteEEPRom(byte fromType)
   }
 }
 
-void ReadEEPRom_FT817(byte fromType)
+//void ReadEEPRom_FT817(byte fromType)
+void ReadEEPRom_FT817(void) //for remove warnings
 {
   byte temp0 = CAT_BUFF[0];
   byte temp1 = CAT_BUFF[1];
@@ -357,10 +385,21 @@ void ReadEEPRom_FT817(byte fromType)
       CAT_BUFF[1] = 0xB2;
       break;      case 0x69 : //FM Mic (#29)  Contains 0-100 (decimal) as displayed
     case 0x78 :
-      if (isUSB)
-        CAT_BUFF[0] = CAT_MODE_USB;
-      else
-        CAT_BUFF[0] = CAT_MODE_LSB;
+      if (cwMode == 0)
+      {
+        if (isUSB)
+          CAT_BUFF[0] = CAT_MODE_USB;
+        else
+          CAT_BUFF[0] = CAT_MODE_LSB;
+      }
+      else if (cwMode == 1)
+      {
+          CAT_BUFF[0] = CAT_MODE_CW;
+      }
+      else if (cwMode == 2)
+      {
+          CAT_BUFF[0] = CAT_MODE_CW;
+      }
         
       if (CAT_BUFF[0] != 0) CAT_BUFF[0] = 1 << 5;
       break;
@@ -383,7 +422,7 @@ void ReadEEPRom_FT817(byte fromType)
       //7A  6 ? ?
       //7A  7 SPL On/Off  0 = Off, 1 = On
 
-      CAT_BUFF[0] = (isSplitOn ? 0xFF : 0x7F);
+      CAT_BUFF[0] = (splitOn ? 0xFF : 0x7F);
       break;
     case 0xB3 : //
       CAT_BUFF[0] = 0x00;
@@ -398,7 +437,7 @@ void ReadEEPRom_FT817(byte fromType)
 
 void WriteEEPRom_FT817(byte fromType)
 {
-  byte temp0 = CAT_BUFF[0];
+  //byte temp0 = CAT_BUFF[0];
   byte temp1 = CAT_BUFF[1];
 
   CAT_BUFF[0] = 0;
@@ -470,8 +509,8 @@ void WriteEEPRom_FT817(byte fromType)
         sideTone = (sideTonePitch * 50 + 300) + sideToneSub;
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
-        delay(500);
-        printLine2("");
+        delay(300);                       //If timeout errors occur in the calling software, remove them
+        clearLine2();
       }
       break;
 
@@ -482,8 +521,9 @@ void WriteEEPRom_FT817(byte fromType)
         sideTone = (sideTonePitch * 50 + 300) + sideToneSub;
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
-        delay(500);
-        printLine2("");
+        delay(300);                   //If timeout errors occur in the calling software, remove them
+        clearLine2();
+        line2DisplayStatus = 0;
       }
       break;
 
@@ -502,8 +542,8 @@ void WriteEEPRom_FT817(byte fromType)
       cwDelayTime = CAT_BUFF[2];
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_DELAY, cwDelayTime);
-      delay(500);
-      printLine2("");
+      delay(300);
+      clearLine2();
       break;
     case 0x62 : //
       //5-0  CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
@@ -511,8 +551,8 @@ void WriteEEPRom_FT817(byte fromType)
       cwSpeed = 1200 / ((CAT_BUFF[2] & 0x3F) + 4);
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_SPEED, cwSpeed);
-      delay(500);
-      printLine2("");
+      delay(300);
+      clearLine2();
 
       break;
       /*
@@ -571,7 +611,8 @@ void WriteEEPRom_FT817(byte fromType)
   Serial.write(ACK);
 }
 
-void CatRxStatus(byte fromType) 
+//void CatRxStatus(byte fromType) 
+void CatRxStatus(void)  //for remove warning
 {
   byte sMeterValue = 1;
 
@@ -591,7 +632,8 @@ void CatRxStatus(byte fromType)
 }
 
 
-void CatTxStatus(byte fromType)
+//void CatTxStatus(byte fromType)
+void CatTxStatus(void)  //for remove warning
 {
   boolean isHighSWR = false;
   boolean isSplitOn = false;
@@ -648,7 +690,6 @@ void Check_Cat(byte fromType)
       rxBufferCheckCount = Serial.available();
       rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT;  //Set time for timeout
     }
-    
     return;
   }
 
@@ -693,11 +734,11 @@ void Check_Cat(byte fromType)
       
     case 0x02 : //Split On
     case 0x82:  //Split Off
-      CatSetSplit(CAT_BUFF[4] == 0x02, fromType);
+      CatSetSplit(CAT_BUFF[4] == 0x02);
       break;
 
     case 0x03 :   //Read Frequency and mode
-      CatGetFreqMode(frequency, fromType);
+      CatGetFreqMode(frequency);
       break;
 
     case 0x07 :   //Set Operating  Mode
@@ -714,24 +755,24 @@ void Check_Cat(byte fromType)
       break;
 
     case 0xDB:  //Read uBITX EEPROM Data
-      ReadEEPRom(fromType); //Call by uBITX Manager Program
+      ReadEEPRom(); //Call by uBITX Manager Program
       break;
     case 0xBB:  //Read FT-817 EEPROM Data  (for comfirtable)
-      ReadEEPRom_FT817(fromType);
+      ReadEEPRom_FT817();
       break;
 
     case 0xDC:  //Write uBITX EEPROM Data
-      WriteEEPRom(fromType); //Call by uBITX Manager Program
+      WriteEEPRom(); //Call by uBITX Manager Program
       break;
     case 0xBC:  //Write FT-817 EEPROM Data  (for comfirtable)
       WriteEEPRom_FT817(fromType);
       break;
 
     case 0xE7 :       //Read RX Status
-      CatRxStatus(fromType);
+      CatRxStatus();
       break;
     case 0xF7:      //Read TX Status
-      CatTxStatus(fromType);
+      CatTxStatus();
       break;
     default:
     /*

ubitx_20/cw_autokey.ino

@@ -1,4 +1,6 @@
 /*************************************************************************
+  KD8CEC's Memory Keyer for HAM
+  
   This source code is written for All amateur radio operator, 
   I have not had amateur radio communication for a long time. CW has been 
   around for a long time, and I do not know what kind of keyer and keying 
@@ -13,6 +15,7 @@
   I wrote this code myself, so there is no license restriction. 
   So this code allows anyone to write with confidence.
   But keep it as long as the original author of the code.
+  DE Ian KD8CEC
 -----------------------------------------------------------------------------
    This program is free software: you can redistribute it and/or modify
    it under the terms of the GNU General Public License as published by
@@ -33,7 +36,7 @@
 //27 + 10 + 18 + 1(SPACE) = //56 
 const PROGMEM uint8_t cwAZTable[27] = {0b00100100 , 0b01001000 , 0b01001010 , 0b00111000 , 0b00010000, 0b01000010, 0b00111100, 0b01000000 , //A ~ H
 0b00100000, 0b01000111 ,0b00111010, 0b01000100, 0b00101100, 0b00101000 , 0b00111110, 0b01000110, 0b01001101, 0b00110100, //I ~ R
-0b00110000, 0b00011000, 0b00110010, 0b01000001, 0b00110110, 0b01001001, 0b01001011, 0b00111000};  //S ~ Z
+0b00110000, 0b00011000, 0b00110010, 0b01000001, 0b00110110, 0b01001001, 0b01001011, 0b01001100};  //S ~ Z
 PGM_P pCwAZTable = reinterpret_cast<PGM_P>(cwAZTable);
 
 const PROGMEM uint8_t cw09Table[27] = {0b00011111, 0b00001111, 0b00000111, 0b00000011, 0b00000001, 0b00000000, 0b00010000, 0b00011000, 0b00011100, 0b00011110};
@@ -208,10 +211,14 @@ void sendCWChar(char cwKeyChar)
         charLength = ((tmpChar >> 6) & 0x03) + 3;
         
         for (j = 0; j < charLength; j++)
-          sendBuff[j] = (tmpChar << j + 2) & 0x80;
+          sendBuff[j] = (tmpChar << (j + 2)) & 0x80;
 
         break;
       }
+      else
+      {
+        charLength = 0;
+      }
     }
   }
 
@@ -257,7 +264,7 @@ unsigned long scrollDispayTime = 0;
 #define scrollSpeed 500
 byte displayScrolStep = 0;
 
-int controlAutoCW(){
+void controlAutoCW(){
     int knob = 0;
     byte i;
 
@@ -290,9 +297,13 @@ int controlAutoCW(){
               displayScrolStep = 0;
           }
           
-          printLineFromEEPRom(0, 2, cwStartIndex + displayScrolStep + CW_DATA_OFSTADJ, cwEndIndex + CW_DATA_OFSTADJ); 
+          printLineFromEEPRom(0, 2, cwStartIndex + displayScrolStep + CW_DATA_OFSTADJ, cwEndIndex + CW_DATA_OFSTADJ, 0); 
+
+          byte diplayAutoCWLine = 0;
+          if ((displayOption1 & 0x01) == 0x01)
+            diplayAutoCWLine = 1;
           
-          lcd.setCursor(0,0);
+          lcd.setCursor(0, diplayAutoCWLine);
           lcd.write(byteToChar(selectedCWTextIndex));
           lcd.write(':');
           isNeedScroll = (cwEndIndex - cwStartIndex) > 14 ? 1 : 0;
@@ -354,6 +365,11 @@ int controlAutoCW(){
         //check interval time, if you want adjust interval between chars, modify below
         if (isAutoCWHold == 0 && (millis() - autoCWbeforeTime > cwSpeed * 3))
         {
+          if (!inTx){                                           //if not TX Status, change RX -> TX
+            keyDown = 0;
+            startTx(TX_CW, 0);  //disable updateDisplay Command for reduce latency time
+          }
+          
           sendCWChar(EEPROM.read(CW_AUTO_DATA + autoCWSendCharIndex++));
 
           if (autoCWSendCharIndex > autoCWSendCharEndIndex) {          //finish auto cw send

ubitx_20/ubitx.h

@@ -0,0 +1,80 @@
+/*************************************************************************
+  header file for C++ by KD8CEC
+-----------------------------------------------------------------------------
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+**************************************************************************/
+#define WSPR_COUNT       443   //WSPR_MESSAGE_COUNT
+#define WSPR_MESSAGE1    444   //
+#define WSPR_MESSAGE2    490   //
+#define WSPR_MESSAGE3    536   //
+#define WSPR_MESSAGE4    582   //
+
+#define WSPR_BAND_COUNT 3
+
+#define TX_SSB 0
+#define TX_CW 1
+
+
+extern void printLine1(const char *c);
+extern void printLine2(const char *c);
+extern void printLineF(char linenmbr, const __FlashStringHelper *c);
+extern void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex, char offsetType);
+extern byte delay_background(unsigned delayTime, byte fromType);
+extern int btnDown(void);
+extern char c[30];
+extern char b[30];
+
+extern unsigned long frequency;
+
+#define printLineF1(x) (printLineF(1, x))
+#define printLineF2(x) (printLineF(0, x))
+
+
+/** 
+ *  The second set of 16 pins on the Raduino's bottom connector are have the three clock outputs and the digital lines to control the rig.
+ *  This assignment is as follows :
+ *    Pin   1   2    3    4    5    6    7    8    9    10   11   12   13   14   15   16
+ *         GND +5V CLK0  GND  GND  CLK1 GND  GND  CLK2  GND  D2   D3   D4   D5   D6   D7  
+ *  These too are flexible with what you may do with them, for the Raduino, we use them to :
+ *  - TX_RX line : Switches between Transmit and Receive after sensing the PTT or the morse keyer
+ *  - CW_KEY line : turns on the carrier for CW
+ */
+
+#define TX_RX (7)
+#define CW_TONE (6)
+#define TX_LPF_A (5)
+#define TX_LPF_B (4)
+#define TX_LPF_C (3)
+#define CW_KEY (2)
+
+//we directly generate the CW by programmin the Si5351 to the cw tx frequency, hence, both are different modes
+//these are the parameter passed to startTx
+#define TX_SSB 0
+#define TX_CW 1
+
+extern void si5351bx_init(void);
+extern void si5351bx_setfreq(uint8_t clknum, uint32_t fout);
+extern void si5351_set_calibration(int32_t cal);
+extern void initOscillators(void);
+extern void Set_WSPR_Param(void);
+extern void TXSubFreq(unsigned long P2);
+
+extern void startTx(byte txMode, byte isDisplayUpdate);
+extern void stopTx(void);
+extern void setTXFilters(unsigned long freq);
+
+extern void SendWSPRManage(void);
+extern byte WsprMSGCount;
+
+

ubitx_20/ubitx_factory_alignment.ino

@@ -14,6 +14,7 @@ void btnWaitForClick(){
 void factory_alignment(){
         
   factoryCalibration(1);
+  line2DisplayStatus = 1;
 
   if (calibration == 0){
     printLine2("Setup Aborted");
@@ -36,6 +37,7 @@ void factory_alignment(){
 
   
   printLine2("#3:Test 3.5MHz");
+  cwMode = 0;
   isUSB = false;
   setFrequency(3500000l);
   updateDisplay();
@@ -58,6 +60,7 @@ void factory_alignment(){
   btnWaitForClick();
   printLine2("#5:Test 14MHz");
 
+  cwMode = 0;
   isUSB = true;
   setFrequency(14000000l);
   updateDisplay();
@@ -79,6 +82,7 @@ void factory_alignment(){
   printLine2("Alignment done");
   delay(1000);
 
+  cwMode = 0;
   isUSB = false;
   setFrequency(7150000l);
   updateDisplay();  

ubitx_20/ubitx_idle.ino

@@ -0,0 +1,254 @@
+/*************************************************************************
+  KD8CEC's uBITX Idle time Processing
+  Functions that run at times that do not affect TX, CW, and CAT
+  It is called in 1/10 time unit.
+-----------------------------------------------------------------------------
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+**************************************************************************/
+char line2Buffer[16];
+//KD8CEC 200Hz ST
+//L14.150 200Hz ST
+//U14.150 +150khz
+int freqScrollPosition = 0;
+//Example Line2 Optinal Display
+//immediate execution, not call by scheulder
+void updateLine2Buffer(char isDirectCall)
+{
+  unsigned long tmpFreq = 0;
+  if (isDirectCall == 0)
+  {
+    if (ritOn)
+    {
+      strcpy(line2Buffer, "RitTX:");
+  
+      //display frequency
+      tmpFreq = ritTxFrequency;
+      for (int i = 15; i >= 6; i--) {
+        if (tmpFreq > 0) {
+          if (i == 12 || i == 8) line2Buffer[i] = '.';
+          else {
+            line2Buffer[i] = tmpFreq % 10 + 0x30;
+            tmpFreq /= 10;
+          }
+        }
+        else
+          line2Buffer[i] = ' ';
+      }
+  
+      return;
+    } //end of ritOn display
+
+    //======================================================
+    //other VFO display
+    //======================================================
+    if (vfoActive == VFO_B)
+    {
+      tmpFreq = vfoA;
+    }
+    else 
+    {
+      tmpFreq = vfoB;
+    }
+  
+    // EXAMPLE 1 & 2
+    //U14.150.100
+    //display frequency
+    for (int i = 9; i >= 0; i--) {
+      if (tmpFreq > 0) {
+        if (i == 2 || i == 6) line2Buffer[i] = '.';
+        else {
+          line2Buffer[i] = tmpFreq % 10 + 0x30;
+          tmpFreq /= 10;
+        }
+      }
+      else
+        line2Buffer[i] = ' ';
+    }
+  
+    //EXAMPLE #1
+    if ((displayOption1 & 0x04) == 0x00)  //none scroll display
+      line2Buffer[6] = 'k';
+    else
+    {
+      //example #2
+      if (freqScrollPosition++ > 18)    //none scroll display time
+      {
+        line2Buffer[6] = 'k';
+        if (freqScrollPosition > 25)
+          freqScrollPosition = -1;
+      }
+      else                              //scroll frequency 
+      {
+        line2Buffer[10] = 'H';
+        line2Buffer[11] = 'z';
+    
+        if (freqScrollPosition < 7)   
+        {
+          for (int i = 11; i >= 0; i--)
+            if (i - (7 - freqScrollPosition) >= 0)
+              line2Buffer[i] = line2Buffer[i - (7 - freqScrollPosition)];
+            else
+              line2Buffer[i] = ' ';
+        }
+        else
+        {
+          for (int i = 0; i < 11; i++)
+            if (i + (freqScrollPosition - 7) <= 11)
+              line2Buffer[i] = line2Buffer[i + (freqScrollPosition - 7)];
+            else
+              line2Buffer[i] = ' ';
+        }
+      }
+    } //scroll
+    
+    line2Buffer[7] = ' ';
+  } //check direct call by encoder
+  
+  if (isIFShift)
+  {
+    if (isDirectCall == 1)
+      for (int i = 0; i < 16; i++)
+        line2Buffer[i] = ' ';
+      
+      //IFShift Offset Value 
+    line2Buffer[8] = 'I';
+    line2Buffer[9] = 'F';
+
+    //if (ifShiftValue == 0)
+    //{
+      /*
+      line2Buffer[10] = 'S';
+      line2Buffer[11] = ':';
+      line2Buffer[12] = 'O';
+      line2Buffer[13] = 'F';
+      line2Buffer[14] = 'F';
+      */
+    //}
+    //else
+    //{
+      line2Buffer[10] = ifShiftValue >= 0 ? '+' : 0;
+      line2Buffer[11] = 0;
+      line2Buffer[12] = ' ';
+    
+      //11, 12, 13, 14, 15
+      memset(b, 0, sizeof(b));
+      ltoa(ifShiftValue, b, DEC);
+      strncat(line2Buffer, b, 5);
+    //}
+    
+    if (isDirectCall == 1)  //if call by encoder (not scheduler), immediate print value
+        printLine2(line2Buffer);    
+  }       // end of display IF
+  else    // step display
+  {
+    if (isDirectCall != 0)
+      return;
+
+    memset(&line2Buffer[8], ' ', 8);
+    //Step
+    long tmpStep = arTuneStep[tuneStepIndex -1];
+    
+    byte isStepKhz = 0;
+    if (tmpStep >= 1000)
+    {
+      isStepKhz = 2;
+    }
+      
+    for (int i = 10; i >= 8 - isStepKhz; i--) {
+      if (tmpStep > 0) {
+          line2Buffer[i + isStepKhz] = tmpStep % 10 + 0x30;
+          tmpStep /= 10;
+      }
+      else
+        line2Buffer[i +isStepKhz] = ' ';
+    }
+    //if (isStepKhz == 1)
+    //  line2Buffer[10] = 'k';
+
+    if (isStepKhz == 0)
+    {
+      line2Buffer[11] = 'H';
+      line2Buffer[12] = 'z';
+    }
+  
+    line2Buffer[13] = ' ';
+    //if (
+    //Check CW Key cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
+    if (cwKeyType == 0)
+    {
+      line2Buffer[14] = 'S';
+      line2Buffer[15] = 'T';
+    }
+    else if (cwKeyType == 1)
+    {
+      line2Buffer[14] = 'I';
+      line2Buffer[15] = 'A';
+    }
+    else
+    {
+      line2Buffer[14] = 'I';
+      line2Buffer[15] = 'B';
+    }    
+  }
+  
+}
+
+//meterType : 0 = S.Meter, 1 : P.Meter
+void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
+{
+  if (meterType == 0 || meterType == 1 || meterType == 2)
+  {
+    drawMeter(meterValue);  //call original source code
+    int lineNumber = 0;
+    if ((displayOption1 & 0x01) == 0x01)
+      lineNumber = 1;
+    
+    lcd.setCursor(drawPosition, lineNumber);
+  
+    for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
+      lcd.write(lcdMeter[i]);
+  }
+}
+
+byte testValue = 0;
+char checkCount = 0;
+void idle_process()
+{
+  //space for user graphic display
+  if (menuOn == 0)
+  {
+    if ((displayOption1 & 0x10) == 0x10)    //always empty topline
+      return;
+      
+    //if line2DisplayStatus == 0 <-- this condition is clear Line, you can display any message
+    if (line2DisplayStatus == 0 || (((displayOption1 & 0x04) == 0x04) && line2DisplayStatus == 2)) {
+      if (checkCount++ > 1)
+      {
+        updateLine2Buffer(0); //call by scheduler
+        printLine2(line2Buffer);
+        line2DisplayStatus = 2;
+        checkCount = 0;
+      }
+
+      //EX for Meters
+      /*
+      DisplayMeter(0, testValue++, 7);
+      if (testValue > 30)
+        testValue = 0;
+      */
+    }
+  }
+}
+

ubitx_20/ubitx_keyer.ino

@@ -1,6 +1,9 @@
 /**
- * CW Keyer
- * 
+ CW Keyer
+ CW Key logic change with ron's code (ubitx_keyer.cpp)
+ Ron's logic has been modified to work with the original uBITX by KD8CEC
+
+ Original Comment ----------------------------------------------------------------------------
  * The CW keyer handles either a straight key or an iambic / paddle key.
  * They all use just one analog input line. This is how it works.
  * The analog line has the internal pull-up resistor enabled. 
@@ -34,7 +37,6 @@
 //when both are simultaneously pressed
 char lastPaddle = 0;
 
-
 //reads the analog keyer pin and reports the paddle
 byte getPaddle(){
   int paddle = analogRead(ANALOG_KEYER);
@@ -81,13 +83,201 @@ void cwKeyUp(){
   cwTimeout = millis() + cwDelayTime * 10;
 }
 
+//Variables for Ron's new logic
+#define DIT_L 0x01 // DIT latch
+#define DAH_L 0x02 // DAH latch
+#define DIT_PROC 0x04 // DIT is being processed
+#define PDLSWAP 0x08 // 0 for normal, 1 for swap
+#define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
+enum KSTYPE {IDLE, CHK_DIT, CHK_DAH, KEYED_PREP, KEYED, INTER_ELEMENT };
+static unsigned long ktimer;
+unsigned char keyerState = IDLE;
+
+//Below is a test to reduce the keying error. do not delete lines
+//create by KD8CEC for compatible with new CW Logic
+char update_PaddleLatch(byte isUpdateKeyState) {
+  unsigned char tmpKeyerControl = 0;
+  int paddle = analogRead(ANALOG_KEYER);
+
+  if (paddle >= cwAdcDashFrom && paddle <= cwAdcDashTo)
+    tmpKeyerControl |= DAH_L;
+  else if (paddle >= cwAdcDotFrom && paddle <= cwAdcDotTo)
+    tmpKeyerControl |= DIT_L;
+  else if (paddle >= cwAdcBothFrom && paddle <= cwAdcBothTo)
+    tmpKeyerControl |= (DAH_L | DIT_L) ;     
+  else 
+  {
+    if (Iambic_Key)
+      tmpKeyerControl = 0 ;
+    else if (paddle >= cwAdcSTFrom && paddle <= cwAdcSTTo)
+      tmpKeyerControl = DIT_L ;
+     else
+       tmpKeyerControl = 0 ; 
+  }
+  
+  if (isUpdateKeyState == 1)
+    keyerControl |= tmpKeyerControl;
+
+  return tmpKeyerControl;
+}
+
+/*****************************************************************************
+// New logic, by RON
+// modified by KD8CEC
+******************************************************************************/
+void cwKeyer(void){
+  lastPaddle = 0;
+  bool continue_loop = true;
+  unsigned tmpKeyControl = 0;
+  
+  if( Iambic_Key ) {
+    while(continue_loop) {
+      switch (keyerState) {
+        case IDLE:
+          tmpKeyControl = update_PaddleLatch(0);
+          if ( tmpKeyControl == DAH_L || tmpKeyControl == DIT_L || 
+            tmpKeyControl == (DAH_L | DIT_L) || (keyerControl & 0x03)) {
+             update_PaddleLatch(1);
+             keyerState = CHK_DIT;
+          }else{
+            if (0 < cwTimeout && cwTimeout < millis()){
+              cwTimeout = 0;
+              stopTx();
+            }
+            continue_loop = false;
+          }
+          break;
+    
+        case CHK_DIT:
+          if (keyerControl & DIT_L) {
+            keyerControl |= DIT_PROC;
+            ktimer = cwSpeed;
+            keyerState = KEYED_PREP;
+          }else{
+            keyerState = CHK_DAH;
+          }
+          break;
+    
+        case CHK_DAH:
+          if (keyerControl & DAH_L) {
+            ktimer = cwSpeed*3;
+            keyerState = KEYED_PREP;
+          }else{
+            keyerState = IDLE;
+          }
+          break;
+    
+        case KEYED_PREP:
+          //modified KD8CEC
+          /*
+          ktimer += millis(); // set ktimer to interval end time
+          keyerControl &= ~(DIT_L + DAH_L); // clear both paddle latch bits
+          keyerState = KEYED; // next state
+          if (!inTx){
+            //DelayTime Option
+            delay_background(delayBeforeCWStartTime * 2, 2);
+            
+            keyDown = 0;
+            cwTimeout = millis() + cwDelayTime * 10;  //+ CW_TIMEOUT;
+            startTx(TX_CW, 1);
+          }
+          */
+          if (!inTx){
+            //DelayTime Option
+            delay_background(delayBeforeCWStartTime * 2, 2);
+            
+            keyDown = 0;
+            cwTimeout = millis() + cwDelayTime * 10;  //+ CW_TIMEOUT;
+            startTx(TX_CW, 1);
+          }
+          ktimer += millis(); // set ktimer to interval end time
+          keyerControl &= ~(DIT_L + DAH_L); // clear both paddle latch bits
+          keyerState = KEYED; // next state
+          
+          cwKeydown();
+          break;
+    
+        case KEYED:
+          if (millis() > ktimer) { // are we at end of key down ?
+           cwKeyUp();
+           ktimer = millis() + cwSpeed; // inter-element time
+            keyerState = INTER_ELEMENT; // next state
+          }else if (keyerControl & IAMBICB) {
+            update_PaddleLatch(1); // early paddle latch in Iambic B mode
+          }
+          break;
+    
+        case INTER_ELEMENT:
+          // Insert time between dits/dahs
+          update_PaddleLatch(1); // latch paddle state
+          if (millis() > ktimer) { // are we at end of inter-space ?
+            if (keyerControl & DIT_PROC) { // was it a dit or dah ?
+              keyerControl &= ~(DIT_L + DIT_PROC); // clear two bits
+              keyerState = CHK_DAH; // dit done, check for dah
+            }else{
+              keyerControl &= ~(DAH_L); // clear dah latch
+              keyerState = IDLE; // go idle
+            }
+          }
+          break;
+      }
+  
+      Check_Cat(2);
+    } //end of while
+  }
+  else{
+    while(1){
+      if (update_PaddleLatch(0) == DIT_L) {
+        // if we are here, it is only because the key is pressed
+        if (!inTx){
+          //DelayTime Option
+          delay_background(delayBeforeCWStartTime * 2, 2);
+          
+          keyDown = 0;
+          cwTimeout = millis() + cwDelayTime * 10;  //+ CW_TIMEOUT; 
+          startTx(TX_CW, 1);
+        }
+        cwKeydown();
+        
+        while ( update_PaddleLatch(0) == DIT_L ) 
+          delay_background(1, 3);
+          
+        cwKeyUp();
+      }
+      else{
+        if (0 < cwTimeout && cwTimeout < millis()){
+          cwTimeout = 0;
+          keyDown = 0;
+          stopTx();
+        }
+        //if (!cwTimeout) //removed by KD8CEC
+        //   return;
+        // got back to the beginning of the loop, if no further activity happens on straight key
+        // we will time out, and return out of this routine 
+        //delay(5);
+        //delay_background(5, 3); //removed by KD8CEC
+        //continue;               //removed by KD8CEC
+        return;                   //Tx stop control by Main Loop
+      }
+
+      Check_Cat(2);
+    } //end of while
+  }   //end of elese
+}
+
+
+//=======================================================================================
+//Before logic
+//by Farhan and modified by KD8CEC
+//======================================================================================
+
 /**
  * The keyer handles the straight key as well as the iambic key
  * This module keeps looping until the user stops sending cw
  * if the cwTimeout is set to 0, then it means, we have to exit the keyer loop
  * Each time the key is hit the cwTimeout is pushed to a time in the future by cwKeyDown()
  */
- 
+ /*
 void cwKeyer(){
   byte paddle;
   lastPaddle = 0;
@@ -111,17 +301,7 @@ void cwKeyer(){
       if (!cwTimeout)
         return;
 
-      //if a paddle was used (not a straight key) we should extend the space to be a full dash 
-      //by adding two more dots long space (one has already been added at the end of the dot or dash)
-      /*
-      if (cwTimeout > 0 && lastPaddle != PADDLE_STRAIGHT)
-        delay_background(cwSpeed * 2, 3);
-        //delay(cwSpeed * 2);
-
-      // got back to the begining of the loop, if no further activity happens on the paddle or the straight key
-      // we will time out, and return out of this routine 
-      delay(5);
-      */
+      Check_Cat(2); //for uBITX on Raspberry pi, when straight keying, disconnect / test complete
       continue;
     }
 
@@ -184,3 +364,6 @@ void cwKeyer(){
       delay(cwSpeed);
   }
 }
+*/
+
+

ubitx_20/ubitx_si5351.ino

@@ -1,3 +1,19 @@
+/************************************************************************************
+ * KD8CEC 
+ * kd8cec@gmail.com   http://www.hamskey.com
+ * 
+ * Merge two SI5351 Librarys
+ * KE7ER's fixed vco and variable Clocks Configure values
+ * G3ZIL's fixed Clock Configure Value and variable VCO
+ *  * I have combined the two libraries above. All licenses follow the above library.
+ * 
+ * PLL-A is generated by fixing 850Mhz clock. All output clocks use PLL-A to 
+ * generate the frequency. This is the method used in QRP radios such as uBITX.
+ * When switching to WSPR transmission mode, PLL-B operates for the base frequency to transmit WSPR. 
+ * The output clock channel that controls the frequency is connected to the PLL-B. 
+ * The WSPR protocol is generated by changing the clock of the PLL-B.
+ ************************************************************************************/
+
 // *************  SI5315 routines - tks Jerry Gaffke, KE7ER   ***********************
 
 // An minimalist standalone set of Si5351 routines.
@@ -60,19 +76,22 @@ void i2cWriten(uint8_t reg, uint8_t *vals, uint8_t vcnt) {  // write array
   Wire.endTransmission();
 }
 
+uint8_t  si5351Val[8] = {0, 1, 0, 0, 0, 0, 0, 0}; //for reduce program memory size
 
 void si5351bx_init() {                  // Call once at power-up, start PLLA
-  uint8_t reg;  uint32_t msxp1;
+  uint32_t msxp1;
   Wire.begin();
   i2cWrite(149, 0);                     // SpreadSpectrum off
   i2cWrite(3, si5351bx_clken);          // Disable all CLK output drivers
   i2cWrite(183, SI5351BX_XTALPF << 6);  // Set 25mhz crystal load capacitance
   msxp1 = 128 * SI5351BX_MSA - 512;     // and msxp2=0, msxp3=1, not fractional
-  uint8_t  vals[8] = {0, 1, BB2(msxp1), BB1(msxp1), BB0(msxp1), 0, 0, 0};
-  i2cWriten(26, vals, 8);               // Write to 8 PLLA msynth regs
+  //uint8_t  vals[8] = {0, 1, BB2(msxp1), BB1(msxp1), BB0(msxp1), 0, 0, 0};
+  si5351Val[2] = BB2(msxp1);
+  si5351Val[3] = BB1(msxp1);
+  si5351Val[4] = BB0(msxp1);
+  
+  i2cWriten(26, si5351Val, 8);               // Write to 8 PLLA msynth regs
   i2cWrite(177, 0x20);                  // Reset PLLA  (0x80 resets PLLB)
-  // for (reg=16; reg<=23; reg++) i2cWrite(reg, 0x80);    // Powerdown CLK's
-  // i2cWrite(187, 0);                  // No fannout of clkin, xtal, ms0, ms4
 }
 
 void si5351bx_setfreq(uint8_t clknum, uint32_t fout) {  // Set a CLK to fout Hz
@@ -105,11 +124,48 @@ void si5351_set_calibration(int32_t cal){
     si5351bx_setfreq(0, usbCarrier);
 }
 
+void SetCarrierFreq()
+{
+  unsigned long appliedCarrier = ((cwMode == 0 ? usbCarrier : cwmCarrier) + (isIFShift && (inTx == 0) ? ifShiftValue : 0));
+  si5351bx_setfreq(0, appliedCarrier);
+
+    /*
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));
+  else
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));
+    */
+}
+
 void initOscillators(){
   //initialize the SI5351
   si5351bx_init();
   si5351bx_vcoa = (SI5351BX_XTAL * SI5351BX_MSA) + calibration; // apply the calibration correction factor
-  si5351bx_setfreq(0, usbCarrier);
+  SetCarrierFreq();
+}
+
+//============================================================
+// ADD FUNCTIONS by KD8CEC
+//============================================================
+uint8_t Wspr_Reg1[8] = {0xFF,0xFE, 0x00, 0, 0, 0, 0, 0};  //3, 4, 5, 6, 7
+uint8_t Wspr_Reg2[8] = {0, 1, 0, 0, 0, 0, 0, 0};          //2, 3, 4
+
+void Set_WSPR_Param(void) 
+{ 
+  i2cWrite(18, 128);
+  i2cWriten(34, Wspr_Reg1, 8);
+  i2cWriten(58, Wspr_Reg2, 8);
+  i2cWrite(177, 128);
+  i2cWrite(18, 111);
+
+  si5351bx_clken &= ~(1 << 2);
+  i2cWrite(3, si5351bx_clken);
+}
+
+void TXSubFreq(unsigned long P2)
+{                   
+  i2cWrite(40, (P2 & 65280) >> 8);
+  i2cWrite(41, P2 & 255);
 }
 
 

ubitx_20/ubitx_ui.ino

@@ -9,7 +9,7 @@
 //#define printLineF2(x) (printLineF(0, x))
 
 //returns true if the button is pressed
-int btnDown(){
+int btnDown(void){
   if (digitalRead(FBUTTON) == HIGH)
     return 0;
   else
@@ -25,8 +25,8 @@ int btnDown(){
  * The current reading of the meter is assembled in the string called meter
  */
 
-//char meter[17];
 
+/*
 const PROGMEM uint8_t s_meter_bitmap[] = {
   B00000,B00000,B00000,B00000,B00000,B00100,B00100,B11011,
   B10000,B10000,B10000,B10000,B10100,B10100,B10100,B11011,
@@ -35,7 +35,18 @@ const PROGMEM uint8_t s_meter_bitmap[] = {
   B00010,B00010,B00010,B00010,B00110,B00110,B00110,B11011,
   B00001,B00001,B00001,B00001,B00101,B00101,B00101,B11011
 };
-PGM_P ps_meter_bitmap = reinterpret_cast<PGM_P>(s_meter_bitmap);
+*/
+
+const PROGMEM uint8_t meters_bitmap[] = {
+  B10000,  B10000,  B10000,  B10000,  B10000,  B10000,  B10000,  B10000 ,   //custom 1
+  B11000,  B11000,  B11000,  B11000,  B11000,  B11000,  B11000,  B11000 ,   //custom 2
+  B11100,  B11100,  B11100,  B11100,  B11100,  B11100,  B11100,  B11100 ,   //custom 3
+  B11110,  B11110,  B11110,  B11110,  B11110,  B11110,  B11110,  B11110 ,   //custom 4
+  B11111,  B11111,  B11111,  B11111,  B11111,  B11111,  B11111,  B11111 ,   //custom 5
+  B01000,  B11100,  B01000,  B00000,  B10111,  B10101,  B10101,  B10111     //custom 6
+};
+
+PGM_P p_metes_bitmap = reinterpret_cast<PGM_P>(meters_bitmap);
 
 const PROGMEM uint8_t lock_bitmap[8] = {
   0b01110,
@@ -60,38 +71,54 @@ void initMeter(){
   lcd.createChar(0, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i);
   lcd.createChar(1, tmpbytes);
 
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 8);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 8);
   lcd.createChar(2, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 16);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 16);
   lcd.createChar(3, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 24);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 24);
   lcd.createChar(4, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 28);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 32);
   lcd.createChar(5, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 32);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 40);
   lcd.createChar(6, tmpbytes);
 }
 
-/**
- * The meter is drawn with special characters.
- * character 1 is used to simple draw the blocks of the scale of the meter
- * characters 2 to 6 are used to draw the needle in positions 1 to within the block
- * This displays a meter from 0 to 100, -1 displays nothing
- */
+//by KD8CEC
+//0 ~ 25 : 30 over : + 10
+void drawMeter(int needle) {
+  //5Char + O over
+  int i;
 
- /*
+  for (i = 0; i < 5; i++) {
+    if (needle >= 5)
+      lcdMeter[i] = 5; //full
+    else if (needle > 0)
+      lcdMeter[i] = needle; //full
+    else  //0
+      lcdMeter[i] = 0x20;
+    
+    needle -= 5;
+  }
+
+  if (needle > 0)
+    lcdMeter[5] = 6;
+  else
+    lcdMeter[5] = 0x20;
+}
+
+/*
 void drawMeter(int8_t needle){
   int16_t best, i, s;
 
@@ -101,21 +128,23 @@ void drawMeter(int8_t needle){
   s = (needle * 4)/10;
   for (i = 0; i < 8; i++){
     if (s >= 5)
-      meter[i] = 1;
+      lcdMeter[i] = 1;
     else if (s >= 0)
-      meter[i] = 2 + s;
+      lcdMeter[i] = 2 + s;
     else
-      meter[i] = 1;
+      lcdMeter[i] = 1;
     s = s - 5;
   }
   if (needle >= 40)
-    meter[i-1] = 6;
-  meter[i] = 0;
+    lcdMeter[i-1] = 6;
+  lcdMeter[i] = 0;
 }
 */
-
 // The generic routine to display one line on the LCD 
-void printLine(char linenmbr, char *c) {
+void printLine(unsigned char linenmbr, const char *c) {
+  if ((displayOption1 & 0x01) == 0x01)
+    linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
+    
   if (strcmp(c, printBuff[linenmbr])) {     // only refresh the display when there was a change
     lcd.setCursor(0, linenmbr);             // place the cursor at the beginning of the selected line
     lcd.print(c);
@@ -144,13 +173,16 @@ void printLineF(char linenmbr, const __FlashStringHelper *c)
 }
 
 #define LCD_MAX_COLUMN 16
-void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex) {
+void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex, char offsetTtype) {
+  if ((displayOption1 & 0x01) == 0x01)
+    linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
+  
   lcd.setCursor(lcdColumn, linenmbr);
 
   for (byte i = eepromStartIndex; i <= eepromEndIndex; i++)
   {
     if (++lcdColumn <= LCD_MAX_COLUMN)
-      lcd.write(EEPROM.read(USER_CALLSIGN_DAT + i));
+      lcd.write(EEPROM.read((offsetTtype == 0 ? USER_CALLSIGN_DAT : WSPR_MESSAGE1) + i));
     else
       break;
   }
@@ -160,14 +192,20 @@ void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, b
 }
 
 //  short cut to print to the first line
-void printLine1(char *c){
+void printLine1(const char *c){
   printLine(1,c);
 }
 //  short cut to print to the first line
-void printLine2(char *c){
+void printLine2(const char *c){
   printLine(0,c);
 }
 
+void clearLine2()
+{
+  printLine2("");
+  line2DisplayStatus = 0;
+}
+
 //  short cut to print to the first line
 void printLine1Clear(){
   printLine(1,"");
@@ -179,6 +217,7 @@ void printLine2Clear(){
 
 void printLine2ClearAndUpdate(){
   printLine(0, "");
+  line2DisplayStatus = 0;  
   updateDisplay();
 }
 
@@ -194,7 +233,6 @@ char byteToChar(byte srcByte){
 void updateDisplay() {
   // tks Jack Purdum W8TEE
   // replaced fsprint commmands by str commands for code size reduction
-  
   // replace code for Frequency numbering error (alignment, point...) by KD8CEC
   int i;
   unsigned long tmpFreq = frequency; //
@@ -221,10 +259,21 @@ void updateDisplay() {
     if (ritOn)
       strcpy(c, "RIT ");
     else {
-      if (isUSB)
-        strcpy(c, "USB ");
+      if (cwMode == 0)
+      {
+        if (isUSB)
+          strcpy(c, "USB ");
+        else
+          strcpy(c, "LSB ");
+      }
+      else if (cwMode == 1)
+      {
+          strcpy(c, "CWL ");
+      }
       else
-        strcpy(c, "LSB ");
+      {
+          strcpy(c, "CWU ");
+      }
     }
     if (vfoActive == VFO_A) // VFO A is active
       strcat(c, "A:");
@@ -232,6 +281,15 @@ void updateDisplay() {
       strcat(c, "B:");
   }
 
+  //Fixed by Mitani Massaru (JE4SMQ)
+  if (isShiftDisplayCWFreq == 1)
+  {
+    if (cwMode == 1)        //CWL
+        tmpFreq = tmpFreq - sideTone + shiftDisplayAdjustVal;
+    else if (cwMode == 2)   //CWU
+        tmpFreq = tmpFreq + sideTone + shiftDisplayAdjustVal;
+  }
+
   //display frequency
   for (int i = 15; i >= 6; i--) {
     if (tmpFreq > 0) {
@@ -251,35 +309,24 @@ void updateDisplay() {
   //  strcat(c, " TX");
   printLine(1, c);
 
-  if (isDialLock == 1) {
-    lcd.setCursor(5,1);
+  byte diplayVFOLine = 1;
+  if ((displayOption1 & 0x01) == 0x01)
+    diplayVFOLine = 0;
+
+  if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
+    (vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write((uint8_t)0);
   }
   else if (isCWAutoMode == 2){
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write(0x7E);
   }
   else
   {
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write(":");
   }
-
-/*
-  //now, the second line
-  memset(c, 0, sizeof(c));
-  memset(b, 0, sizeof(b));
-
-  if (inTx)
-    strcat(c, "TX ");
-  else if (ritOn)
-    strcpy(c, "RIT");
-
-  strcpy(c, "      \xff");
-  drawMeter(meter_reading);
-  strcat(c, meter);
-  strcat(c, "\xff");
-  printLine2(c);*/
 }
 
 int enc_prev_state = 3;
@@ -311,9 +358,9 @@ int enc_read(void) {
   byte newState;
   int enc_speed = 0;
   
-  long stop_by = millis() + 50;
+  unsigned long start_at = millis();
   
-  while (millis() < stop_by) { // check if the previous state was stable
+  while (millis() - start_at < 50) { // check if the previous state was stable
     newState = enc_state(); // Get current state  
     
     if (newState != enc_prev_state)

ubitx_20/ubitx_wspr.cpp

@@ -0,0 +1,193 @@
+/**********************************************************************************
+WSPR SENDER for uBITX  by KD8CEC
+Some of the code that sends WSPR referenced the code in G3ZIL.
+Thanks to G3ZIL for sharing great code.
+
+Due to the limited memory of uBITX, I have implemented at least only a few of the codes in uBITX.
+
+Thanks for testing
+Beta Tester : 
+
+-----------------------------------------------------------------------------
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+**********************************************************************************/
+
+#include <arduino.h>
+#include <EEPROM.h>
+#include "ubitx.h"
+
+//begin of test
+byte WsprToneCode[164];
+
+long lastTime=0;
+unsigned long TX_MSNB_P2;              // Si5351 register MSNB_P2  PLLB for Tx
+unsigned long TX_P2;    // Variable values for MSNB_P2 which defines the frequencies for the data
+
+extern int enc_read(void);
+
+byte WsprMSGCount = 0;
+#define PTT   (A3)
+
+#define WSPR_BAND1 401
+
+extern uint8_t Wspr_Reg1[8]; //3, 4, 5, 6, 7
+extern uint8_t Wspr_Reg2[8]; //2, 3, 4
+
+void SendWSPRManage()
+{
+  int knob = 0;
+  byte knobPosition = 0;
+  char isNeedDisplayInfo = 0;
+  char nowSelectedIndex = 0;
+  char nowWsprStep = 0; //0 : select Message, 1 : select band, 2 : send
+  char selectedWsprMessageIndex = -1;
+  char selectedWsprBandIndex = -1;
+
+  unsigned long WsprTXFreq = 0;
+  unsigned int WsprMultiChan = 0;
+  unsigned long prevFreq;
+  char loopIndex;
+
+  delay_background(500, 0);
+  
+  //Readed WsprMSGCount, WsprTone
+  while(1)
+  {
+    knob = enc_read();
+    
+    if (knobPosition > 0 && knob < 0)
+      knobPosition--;
+    else if (knob > 0 && (knobPosition <= (nowWsprStep == 0 ? WsprMSGCount : WSPR_BAND_COUNT) * 10 -2))
+      knobPosition++;
+
+    nowSelectedIndex = knobPosition / 10;
+
+    if (nowWsprStep == 0) //select Message status
+    {
+      printLineF2(F("WSPR:"));
+      
+      if (selectedWsprMessageIndex != nowSelectedIndex)
+      {
+        selectedWsprMessageIndex = nowSelectedIndex;
+        int wsprMessageBuffIndex = selectedWsprMessageIndex * 46;
+        
+        //Display WSPR Name tag
+        printLineFromEEPRom(0, 6, wsprMessageBuffIndex, wsprMessageBuffIndex + 4, 1); 
+
+        //Load WSPR Tonecode
+        //Read Tone Code
+        for (int i = 0; i < 41; i++)
+        {
+          byte readData = EEPROM.read(WSPR_MESSAGE1 + 5 + (wsprMessageBuffIndex) + i);  //NAME TAG 5, MESSAGE 41 = 46
+          WsprToneCode[i * 4 + 0] = readData & 3;
+          WsprToneCode[i * 4 + 1] = (readData >> 2) & 3;
+          WsprToneCode[i * 4 + 2] = (readData >> 4) & 3;
+          WsprToneCode[i * 4 + 3] = (readData >> 6) & 3;
+        }
+      }
+      else if (btnDown())
+      {
+        nowWsprStep = 1;  //Change Status to Select Band
+        knobPosition = 0;
+        nowSelectedIndex = 0;
+        delay_background(500, 0);
+      }
+    }
+    else if (nowWsprStep == 1)
+    {
+      //printLineF2(F("Select Band"));
+      if (selectedWsprBandIndex != nowSelectedIndex)
+      {
+        selectedWsprBandIndex = nowSelectedIndex;
+        int bandBuffIndex = WSPR_BAND1 + selectedWsprBandIndex * 14;
+        
+        EEPROM.get(bandBuffIndex, WsprTXFreq); 
+        EEPROM.get(bandBuffIndex + 4, WsprMultiChan); 
+
+        /*
+        //3, 4, 5, 6, 7
+        Wspr_Reg1[3] = EEPROM.read(bandBuffIndex + 6);
+        Wspr_Reg1[4] = EEPROM.read(bandBuffIndex + 7);
+        Wspr_Reg1[5] = EEPROM.read(bandBuffIndex + 8);
+        Wspr_Reg1[6] = EEPROM.read(bandBuffIndex + 9);
+        Wspr_Reg1[7] = EEPROM.read(bandBuffIndex + 10);
+        */
+        for (loopIndex = 3; loopIndex < 8; loopIndex++)
+          Wspr_Reg1[loopIndex] = EEPROM.read(bandBuffIndex + loopIndex + 3);
+
+        /*
+        Wspr_Reg2[2] = EEPROM.read(bandBuffIndex + 11);
+        Wspr_Reg2[3] = EEPROM.read(bandBuffIndex + 12);
+        Wspr_Reg2[4] = EEPROM.read(bandBuffIndex + 13);
+        */
+        //2, 3, 4
+        for (loopIndex = 2; loopIndex < 5; loopIndex++)
+          Wspr_Reg2[loopIndex] = EEPROM.read(bandBuffIndex + loopIndex + 9);
+
+        TX_MSNB_P2 = ((unsigned long)Wspr_Reg1[5] & 0x0F) << 16 | ((unsigned long)Wspr_Reg1[6]) << 8 | Wspr_Reg1[7];
+      }
+
+      ltoa(WsprTXFreq, b, DEC);
+      if (digitalRead(PTT) == 0)
+        strcpy(c, "SEND:");
+      else
+        strcpy(c, "PTT->");
+
+      strcat(c, b);
+      printLine1(c);
+      
+      if (digitalRead(PTT) == 0)
+      {
+        //printLineF1(F("Transmitting"));
+        //SEND WSPR
+        //If you need to consider the Rit and Sprite modes, uncomment them below.
+        //remark = To reduce the size of the program
+        //prevFreq = frequency;
+        //frequency = WsprTXFreq;
+        setTXFilters(WsprTXFreq);
+        startTx(TX_CW, 0);
+        
+        //Start WSPR
+        Set_WSPR_Param();
+        digitalWrite(CW_KEY, 1);     
+        
+        for (int i = 0; i < 162; i++)
+        {                                                         // Now this is the message loop
+          lastTime = millis();                                    // Store away the time when the last message symbol was sent
+          TX_P2 = TX_MSNB_P2 + WsprMultiChan * WsprToneCode[i];   // This represents the 1.46 Hz shift and is correct only for the bands specified in the array
+          TXSubFreq(TX_P2);                                       // TX at the appropriate channel frequency for....
+
+          //if (btnDown())
+          //  break;
+
+          while (millis() < lastTime + 683){}                     // .... 0,683 seconds
+        }
+        
+        digitalWrite(CW_KEY, 0);
+        stopTx(); //call setFrequency -> recovery TX Filter
+        //frequency = prevFreq;
+        
+        selectedWsprBandIndex = -1;
+      }     //end of PTT Check
+      else if (btnDown())
+      {
+        return;
+      }
+
+    }  //end of status check
+    
+    //delay_background(50, 1);
+  } //end of while
+}
+