for Reduce CW Keying error

This commit is contained in:
phdlee 2018-01-26 21:47:15 +09:00
parent db543c43e1
commit 4506ff1c1b
4 changed files with 190 additions and 22 deletions

View File

@ -1,5 +1,5 @@
/*************************************************************************
KD8CEC'S Memory Keyer for HAM
KD8CEC's Memory Keyer for HAM
This source code is written for All amateur radio operator,
I have not had amateur radio communication for a long time. CW has been

View File

@ -158,7 +158,17 @@ int count = 0; //to generally count ticks, loops, etc
#define TX_TUNE_TYPE 261 //
#define HAM_BAND_RANGE 262 //FROM (2BYTE) TO (2BYTE) * 10 = 40byte
#define HAM_BAND_FREQS 302 //40, 1 BAND = 4Byte most bit is mode
#define TUNING_STEP 342 //TUNING STEP * 6 (index 1 + STEPS 5)
#define TUNING_STEP 342 //TUNING STEP * 6 (index 1 + STEPS 5)
//for reduce cw key error, eeprom address
#define CW_ADC_ST_FROM 348 //CW ADC Range STRAIGHT KEY from
#define CW_ADC_ST_TO 349 //CW ADC Range STRAIGHT KEY to
#define CW_ADC_DOT_FROM 350 //CW ADC Range DOT from
#define CW_ADC_DOT_TO 351 //CW ADC Range DOT to
#define CW_ADC_DASH_FROM 352 //CW ADC Range DASH from
#define CW_ADC_DASH_TO 353 //CW ADC Range DASH to
#define CW_ADC_BOTH_FROM 354 //CW ADC Range BOTH from
#define CW_ADC_BOTH_TO 355 //CW ADC Range BOTH to
//Check Firmware type and version
#define FIRMWAR_ID_ADDR 776 //776 : 0x59, 777 :0x58, 778 : 0x68 : Id Number, if not found id, erase eeprom(32~1023) for prevent system error.
@ -245,6 +255,16 @@ byte isTxType = 0; //000000[0 - isSplit] [0 - isTXStop]
byte arTuneStep[5];
byte tuneStepIndex; //default Value 0, start Offset is 0 because of check new user
//CW ADC Range
byte cwAdcSTFrom = 0;
byte cwAdcSTTo = 0;
byte cwAdcDotFrom = 0;
byte cwAdcDotTo = 0;
byte cwAdcDashtFrom = 0;
byte cwAdcDashTo = 0;
byte cwAdcBothFrom = 0;
byte cwAdcBothTo = 0;
//Variables for auto cw mode
byte isCWAutoMode = 0; //0 : none, 1 : CW_AutoMode_Menu_Selection, 2 : CW_AutoMode Sending
byte cwAutoTextCount = 0; //cwAutoText Count
@ -686,7 +706,10 @@ void initSettings(){
EEPROM.get(VFO_B, vfoB);
EEPROM.get(CW_SIDETONE, sideTone);
EEPROM.get(CW_SPEED, cwSpeed);
//End of original code
//----------------------------------------------------------------
//Add Lines by KD8CEC
//for custom source Section =============================
//ID & Version Check from EEProm
//if found different firmware, erase eeprom (32
@ -787,6 +810,44 @@ void initSettings(){
if (tuneStepIndex == 0) //New User
tuneStepIndex = 3;
//CW Key ADC Range ======= adjust set value for reduce cw keying error
//by KD8CEC
EEPROM.get(CW_ADC_ST_FROM, cwAdcSTFrom);
EEPROM.get(CW_ADC_ST_TO, cwAdcSTTo);
EEPROM.get(CW_ADC_DOT_FROM, cwAdcDotFrom);
EEPROM.get(CW_ADC_DOT_TO, cwAdcDotTo);
EEPROM.get(CW_ADC_DASH_FROM, cwAdcDashtFrom);
EEPROM.get(CW_ADC_DASH_TO, cwAdcDashTo);
EEPROM.get(CW_ADC_BOTH_FROM, cwAdcBothFrom);
EEPROM.get(CW_ADC_BOTH_TO, cwAdcBothTo);
//default Value (for original hardware)
if (cwAdcSTFrom >= cwAdcSTTo)
{
cwAdcSTFrom = 0;
cwAdcSTTo = 50;
}
if (cwAdcBothFrom >= cwAdcBothTo)
{
cwAdcBothFrom = 51;
cwAdcBothTo = 300;
}
if (cwAdcDotFrom >= cwAdcDotTo)
{
cwAdcDotFrom = 301;
cwAdcDotTo = 600;
}
if (cwAdcDashtFrom >= cwAdcDashTo)
{
cwAdcDashtFrom = 601;
cwAdcDashTo = 800;
}
if (cwDelayTime < 1 || cwDelayTime > 250)
@ -798,6 +859,7 @@ void initSettings(){
if (vfoB_mode < 2)
vfoB_mode = 3;
//original code with modified by kd8cec
if (usbCarrier > 12010000l || usbCarrier < 11990000l)
usbCarrier = 11995000l;
@ -810,8 +872,9 @@ void initSettings(){
vfoB = 14150000l;
vfoB_mode = 3;
}
//end of original code section
//for protect eeprom life
//for protect eeprom life by KD8CEC
vfoA_eeprom = vfoA;
vfoB_eeprom = vfoB;
vfoA_mode_eeprom = vfoA_mode;

View File

@ -83,41 +83,45 @@ void cwKeyUp(){
cwTimeout = millis() + cwDelayTime * 10;
}
/*****************************************************************************
// New logic, by RON
// modified by KD8CEC
******************************************************************************/
//Variables for Ron's new logic
#define DIT_L 0x01 // DIT latch
#define DAH_L 0x02 // DAH latch
#define DIT_PROC 0x04 // DIT is being processed
#define PDLSWAP 0x08 // 0 for normal, 1 for swap
#define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
enum KSTYPE {IDLE, CHK_DIT, CHK_DAH, KEYED_PREP, KEYED, INTER_ELEMENT };
static long ktimer;
bool Iambic_Key = true;
unsigned char keyerControl = IAMBICB;
unsigned char keyerState = IDLE;
//Below is a test to reduce the keying error.
/*
//Below is a test to reduce the keying error. do not delete lines
//create by KD8CEC for compatible with new CW Logic
char update_PaddleLatch(byte isUpdateKeyState) {
int paddle = analogRead(ANALOG_KEYER);
unsigned char tmpKeyerControl;
if (paddle > 800) // above 4v is up
tmpKeyerControl = 0;
//if (paddle > 800) // above 4v is up
// tmpKeyerControl = 0;
//else if (paddle > 600) // 4-3v is DASH
else if (paddle > 693 && paddle < 700) // 4-3v is DASH
if (paddle > cwAdcDashtFrom && cwAdcDashTo < 700) // 4-3v is DASH
tmpKeyerControl |= DAH_L;
//else if (paddle > 300) //1-2v is DOT
else if (paddle > 323 && paddle < 328) //1-2v is DOT
else if (paddle > cwAdcDotFrom && paddle < cwAdcDotTo) //1-2v is DOT
tmpKeyerControl |= DIT_L;
//else if (paddle > 50)
else if (paddle > 280 && paddle < 290)
else if (paddle > cwAdcBothFrom && paddle < cwAdcBothTo)
tmpKeyerControl |= (DAH_L | DIT_L) ; //both are between 1 and 2v
else
else
{
if (Iambic_Key)
tmpKeyerControl = 0 ;
else if (paddle > cwAdcSTFrom && paddle < cwAdcSTTo)
tmpKeyerControl = DIT_L ;
else
tmpKeyerControl = 0 ;
}
tmpKeyerControl = 0 ; //STRAIGHT KEY in original code
//keyerControl |= (DAH_L | DIT_L) ; //STRAIGHT KEY in original code
@ -135,8 +139,8 @@ char update_PaddleLatch(byte isUpdateKeyState) {
//if (analogRead(ANALOG_DOT) < 600 ) keyerControl |= DIT_L;
//if (analogRead(ANALOG_DASH) < 600 ) keyerControl |= DAH_L;
}
*/
/*
//create by KD8CEC for compatible with new CW Logic
char update_PaddleLatch(byte isUpdateKeyState) {
int paddle = analogRead(ANALOG_KEYER);
@ -163,8 +167,12 @@ char update_PaddleLatch(byte isUpdateKeyState) {
return tmpKeyerControl;
}
*/
//This function is Ron's Logic.
/*****************************************************************************
// New logic, by RON
// modified by KD8CEC
******************************************************************************/
void cwKeyer(void){
byte paddle;
lastPaddle = 0;

View File

@ -13,6 +13,7 @@
#define printLineF1(x) (printLineF(1, x))
#define printLineF2(x) (printLineF(0, x))
//Ham band move by KD8CEC
void menuBand(int btn){
int knob = 0;
int stepChangeCount = 0;
@ -117,6 +118,7 @@ void menuBand(int btn){
menuOn = 0;
}
//Convert Mode, Number by KD8CEC
//0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
byte modeToByte(){
if (isUSB)
@ -125,12 +127,15 @@ byte modeToByte(){
return 2;
}
//Convert Number to Mode by KD8CEC
void byteToMode(byte modeValue){
if (modeValue == 3)
isUSB = 1;
else
isUSB = 0;
}
//Convert Number to Mode by KD8CEC
void byteWithFreqToMode(byte modeValue){
if (modeValue == 3)
isUSB = 1;
@ -140,6 +145,7 @@ void byteWithFreqToMode(byte modeValue){
isUSB = 0;
}
//VFO Toggle and save VFO Information, modified by KD8CEC
void menuVfoToggle(int btn, char isUseDelayTime)
{
if (!btn){
@ -229,6 +235,7 @@ void menuSidebandToggle(int btn){
}
}
//Select CW Key Type by KD8CEC
void menuSetupKeyType(int btn){
if (!btn && digitalRead(PTT) == HIGH){
if (Iambic_Key)
@ -263,7 +270,88 @@ void menuSetupKeyType(int btn){
}
}
//Analog pin monitoring with CW Key and function keys connected.
//by KD8CEC
void menuADCMonitor(int btn){
int adcPinA0 = 0; //A0(BLACK, EncoderA)
int adcPinA1 = 0; //A1(BROWN, EncoderB)
int adcPinA2 = 0; //A2(RED, Function Key)
int adcPinA3 = 0; //A3(ORANGE, CW Key)
int adcPinA6 = 0; //A6(BLUE, Ptt)
int adcPinA7 = 0; //A7(VIOLET, Spare)
unsigned long pressKeyTime = 0;
if (!btn){
printLineF2(F("ADC Line Monitor"));
return;
}
printLineF2(F("Exit:Long PTT"));
delay_background(2000, 0);
printLineF1(F("A0 A1 A2"));
printLineF2(F("A3 A6 A7"));
delay_background(3000, 0);
while (true) {
adcPinA0 = analogRead(A0); //A0(BLACK, EncoderA)
adcPinA1 = analogRead(A1); //A1(BROWN, EncoderB)
adcPinA2 = analogRead(A2); //A2(RED, Function Key)
adcPinA3 = analogRead(A3); //A3(ORANGE, CW Key)
adcPinA6 = analogRead(A6); //A6(BLUE, Ptt)
adcPinA7 = analogRead(A7); //A7(VIOLET, Spare)
/*
sprintf(c, "%4d %4d %4d", adcPinA0, adcPinA1, adcPinA2);
printLine1(c);
sprintf(c, "%4d %4d %4d", adcPinA3, adcPinA6, adcPinA7);
printLine2(c);
*/
if (adcPinA6 < 10) {
if (pressKeyTime == 0)
pressKeyTime = millis();
else if (pressKeyTime < (millis() - 3000))
break;
}
else
pressKeyTime = 0;
ltoa(adcPinA0, c, 10);
//strcat(b, c);
strcpy(b, c);
strcat(b, ", ");
ltoa(adcPinA1, c, 10);
strcat(b, c);
strcat(b, ", ");
ltoa(adcPinA2, c, 10);
strcat(b, c);
printLine1(b);
//strcpy(b, " ");
ltoa(adcPinA3, c, 10);
strcpy(b, c);
strcat(b, ", ");
ltoa(adcPinA6, c, 10);
strcat(b, c);
strcat(b, ", ");
ltoa(adcPinA7, c, 10);
strcat(b, c);
printLine2(b);
delay_background(200, 0);
} //end of while
printLine2ClearAndUpdate();
menuOn = 0;
}
//Function to disbled transmission
//by KD8CEC
void menuTxOnOff(int btn, byte optionType){
if (!btn){
if ((isTxType & optionType) == 0)
@ -377,6 +465,7 @@ void menuCWSpeed(int btn){
menuOn = 0;
}
//Builtin CW Keyer Logic by KD8CEC
void menuCWAutoKey(int btn){
if (!btn){
printLineF2(F("CW AutoKey Mode?"));
@ -400,6 +489,7 @@ void menuCWAutoKey(int btn){
menuOn = 0;
}
//Modified by KD8CEC
void menuSetupCwDelay(int btn){
int knob = 0;
int tmpCWDelay = cwDelayTime * 10;
@ -448,6 +538,7 @@ void menuSetupCwDelay(int btn){
menuOn = 0;
}
//CW Time delay by KD8CEC
void menuSetupTXCWInterval(int btn){
int knob = 0;
int tmpTXCWInterval = delayBeforeCWStartTime * 2;
@ -659,6 +750,7 @@ void printCarrierFreq(unsigned long freq){
printLine2(c);
}
//modified by KD8CEC (just 1 line remarked //usbCarrier = ...
void menuSetupCarrier(int btn){
int knob = 0;
unsigned long prevCarrier;
@ -712,6 +804,7 @@ void menuSetupCarrier(int btn){
menuOn = 0;
}
//Modified by KD8CEC
void menuSetupCwTone(int btn){
int knob = 0;
int prev_sideTone;
@ -760,6 +853,7 @@ void menuSetupCwTone(int btn){
menuOn = 0;
}
//Lock Dial move by KD8CEC
void setDialLock(byte tmpLock, byte fromMode) {
if (tmpLock == 1)
isDialLock |= (vfoActive == VFO_A ? 0x01 : 0x02);
@ -782,6 +876,7 @@ unsigned int btnDownTimeCount;
#define PRESS_ADJUST_TUNE 1000
#define PRESS_LOCK_CONTROL 2000
//Modified by KD8CEC
void doMenu(){
int select=0, i,btnState;
char isNeedDisplay = 0;
@ -865,7 +960,7 @@ void doMenu(){
btnState = btnDown();
if (i > 0){
if (modeCalibrate && select + i < 160)
if (modeCalibrate && select + i < 170)
select += i;
if (!modeCalibrate && select + i < 80)
select += i;
@ -905,8 +1000,10 @@ void doMenu(){
else if (select < 140 && modeCalibrate)
menuSetupKeyType(btnState);
else if (select < 150 && modeCalibrate)
menuTxOnOff(btnState, 0x01); //TX OFF / ON
menuADCMonitor(btnState);
else if (select < 160 && modeCalibrate)
menuTxOnOff(btnState, 0x01); //TX OFF / ON
else if (select < 170 && modeCalibrate)
menuExit(btnState);
Check_Cat(0); //To prevent disconnections