Merge pull request #17 from phdlee/version0.33

Version0.33

README.md

@@ -1,7 +1,11 @@
 #IMPORTANT INFORMATION
 ----------------------------------------------------------------------------
-- Beta 0.26 and Beta 0.261, Beta 0.262, Beta 0.27 is complete test
-- You can download and use it.
+- 0.30 Version Test only download. almost complete
+- Beta 0.26 and Beta 0.261, Beta 0.262,0.27 is complete test, 0.28 is tested.
+- You can download and use it (Release section).
+
+# Current work list (for Version 0.31)
+  1 Testing CAT Control with Software using hamlib on Linux
 
 #NOTICE
 ----------------------------------------------------------------------------
@@ -46,6 +50,24 @@ Prepared or finished tasks for the next version
                   
 ----------------------------------------------------------------------------
 ## REVISION RECORD
+0.30
+ - implemented the function to monitor the value of all analog inputs. This allows you to monitor the status of the CW keys connected to your uBITX. 
+ - possible to set the ADC range for CW Keying. If no setting is made, it will have the same range as the original code. If you set the CW Keying ADC Values using uBITX Manager 0.3, you can reduce the key error.
+ - Added the function to select Straight Key, IAMBICA, IAMBICB key from the menu.
+ - default Band select is Ham Band mode, if you want common type, long press function key at band select menu, uBITX Manager can be used to modify frequencies to suit your country.
+
+0.29
+ - Remove the use of initialization values in BFO settings - using crruent value, if factory reset
+ - Select Tune Step, default 0, 20, 50, 100, 200, Use the uBITX Manager to set the steps value you want. You can select Step by pressing and holding the Function Key (1sec ~ 2sec).
+ - Modify Dial Lock Function, Press the Function key for more than 3 seconds to toggle dial lock.
+ - created a new frequency tune method. remove original source codes, Threshold has been applied to reduce malfunction. checked the continuity of the user operating to make natural tune possible.
+ - stabilize and remove many warning messages - by Pullrequest and merge
+ - Changed cw keying method. removed the original code and applied Ron's code and Improved compatibility with original hardware and CAT commnication. It can be used without modification of hardware.
+ 
+0.28
+ - Fixed CAT problem with hamlib on Linux
+ - restore Protocol autorecovery logic
+
 0.27 
    (First alpha test version, This will be renamed to the major version 1.0)
  - Dual VFO Dial Lock (vfoA Dial lock)

ubitx_20/ubitx_20.ino

@@ -315,6 +315,10 @@ boolean modeCalibrate = false;//this mode of menus shows extended menus to calib
 
 unsigned long beforeIdle_ProcessTime = 0; //for check Idle time
 byte line2DisplayStatus = 0;  //0:Clear, 1 : menu, 1: DisplayFrom Idle, 
+char lcdMeter[17];
+
+byte isIFShift = 0;     //1 = ifShift, 2 extend
+long ifShiftValue = 0;  //
                               
 /**
  * Below are the basic functions that control the uBitx. Understanding the functions before 
@@ -482,22 +486,22 @@ void setFrequency(unsigned long f){
   if (cwMode == 0)
   {
     if (isUSB){
-      si5351bx_setfreq(2, SECOND_OSC_USB - usbCarrier + f);
+      si5351bx_setfreq(2, SECOND_OSC_USB - usbCarrier + f  + (isIFShift ? ifShiftValue : 0));
       si5351bx_setfreq(1, SECOND_OSC_USB);
     }
     else{
-      si5351bx_setfreq(2, SECOND_OSC_LSB + usbCarrier + f);
+      si5351bx_setfreq(2, SECOND_OSC_LSB + usbCarrier + f + (isIFShift ? ifShiftValue : 0));
       si5351bx_setfreq(1, SECOND_OSC_LSB);
     }
   }
   else
   {
     if (cwMode == 1){ //CWL
-      si5351bx_setfreq(2, SECOND_OSC_LSB + cwmCarrier + f);
+      si5351bx_setfreq(2, SECOND_OSC_LSB + cwmCarrier + f + (isIFShift ? ifShiftValue : 0));
       si5351bx_setfreq(1, SECOND_OSC_LSB);
     }
     else{             //CWU
-      si5351bx_setfreq(2, SECOND_OSC_USB - cwmCarrier + f);
+      si5351bx_setfreq(2, SECOND_OSC_USB - cwmCarrier + f + (isIFShift ? ifShiftValue : 0));
       si5351bx_setfreq(1, SECOND_OSC_USB);
     }
   }
@@ -581,9 +585,9 @@ void stopTx(){
   digitalWrite(TX_RX, 0);           //turn off the tx
 
   if (cwMode == 0)
-    si5351bx_setfreq(0, usbCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
   else
-    si5351bx_setfreq(0, cwmCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
 
   if (ritOn)
     setFrequency(ritRxFrequency);
@@ -751,6 +755,24 @@ void doRIT(){
   }
 }
 
+/*
+void doIFShift(){
+  int knob = enc_read();
+  unsigned long old_freq = frequency;
+
+  if (knob != 0)
+  {
+    if (knob < 0)
+      ifShiftValue -= 1l;
+    else if (knob > 0)
+      ifShiftValue += 1;
+
+    updateLine2Buffer(1);
+    setFrequency(frequency);
+  }
+}
+*/
+
 /**
  save Frequency and mode to eeprom
  */
@@ -847,7 +869,7 @@ void initSettings(){
   else
   {
     Iambic_Key = true;
-    if (cwKeyType = 1)
+    if (cwKeyType == 1)
       keyerControl &= ~IAMBICB;
     else
       keyerControl |= IAMBICB;
@@ -1149,10 +1171,12 @@ void loop(){
   if (!inTx){
     if (ritOn)
       doRIT();
+    //else if (isIFShift)
+    //  doIFShift();
     else 
       doTuningWithThresHold();
 
-    if (isCWAutoMode == 0 && beforeIdle_ProcessTime < millis() - 500) {
+    if (isCWAutoMode == 0 && beforeIdle_ProcessTime < millis() - 250) {
       idle_process();
       beforeIdle_ProcessTime = millis();
     }

ubitx_20/ubitx_idle.ino

@@ -23,24 +23,55 @@ byte line2Buffer[16];
 //U14.150 +150khz
 int freqScrollPosition = 0;
 //Example Line2 Optinal Display
-void updateLine2Buffer()
+//immediate execution, not call by scheulder
+void updateLine2Buffer(char isDirectCall)
 {
   unsigned long tmpFreq = 0;
-
-  if (ritOn)
+  if (isDirectCall == 0)
   {
-    line2Buffer[0] = 'R';
-    line2Buffer[1] = 'i';
-    line2Buffer[2] = 't';
-    line2Buffer[3] = 'T';
-    line2Buffer[4] = 'X';
-    line2Buffer[5] = ':';
-
+    if (ritOn)
+    {
+      line2Buffer[0] = 'R';
+      line2Buffer[1] = 'i';
+      line2Buffer[2] = 't';
+      line2Buffer[3] = 'T';
+      line2Buffer[4] = 'X';
+      line2Buffer[5] = ':';
+  
+      //display frequency
+      tmpFreq = ritTxFrequency;
+      for (int i = 15; i >= 6; i--) {
+        if (tmpFreq > 0) {
+          if (i == 12 || i == 8) line2Buffer[i] = '.';
+          else {
+            line2Buffer[i] = tmpFreq % 10 + 0x30;
+            tmpFreq /= 10;
+          }
+        }
+        else
+          line2Buffer[i] = ' ';
+      }
+  
+      return;
+    }
+    
+    if (vfoActive == VFO_B)
+    {
+      tmpFreq = vfoA;
+      //line2Buffer[0] = 'A';
+    }
+    else 
+    {
+      tmpFreq = vfoB;
+      //line2Buffer[0] = 'B';
+    }
+  
+    // EXAMPLE 1 & 2
+    //U14.150.100
     //display frequency
-    tmpFreq = ritTxFrequency;
-    for (int i = 15; i >= 6; i--) {
+    for (int i = 9; i >= 0; i--) {
       if (tmpFreq > 0) {
-        if (i == 12 || i == 8) line2Buffer[i] = '.';
+        if (i == 2 || i == 6) line2Buffer[i] = '.';
         else {
           line2Buffer[i] = tmpFreq % 10 + 0x30;
           tmpFreq /= 10;
@@ -49,106 +80,136 @@ void updateLine2Buffer()
       else
         line2Buffer[i] = ' ';
     }
-
-    return;
-  }
   
-  if (vfoActive == VFO_B)
-  {
-    tmpFreq = vfoA;
-    //line2Buffer[0] = 'A';
-  }
-  else 
-  {
-    tmpFreq = vfoB;
-    //line2Buffer[0] = 'B';
-  }
-
-  // EXAMPLE 1 & 2
-  //U14.150.100
-  //display frequency
-  for (int i = 9; i >= 0; i--) {
-    if (tmpFreq > 0) {
-      if (i == 2 || i == 6) line2Buffer[i] = '.';
-      else {
-        line2Buffer[i] = tmpFreq % 10 + 0x30;
-        tmpFreq /= 10;
-      }
-    }
-    else
-      line2Buffer[i] = ' ';
-  }
-
-  //EXAMPLE #1
-  if ((displayOption1 & 0x04) == 0x00)
-    line2Buffer[6] = 'k';
-  else
-  {
-    //example #2
-    if (freqScrollPosition++ > 18)
-    {
+    //EXAMPLE #1
+    if ((displayOption1 & 0x04) == 0x00)
       line2Buffer[6] = 'k';
-      if (freqScrollPosition > 25)
-        freqScrollPosition = -1;
-    }
     else
     {
-      line2Buffer[10] = 'H';
-      line2Buffer[11] = 'z';
-  
-      if (freqScrollPosition < 7)
+      //example #2
+      if (freqScrollPosition++ > 18)
       {
-        for (int i = 11; i >= 0; i--)
-          if (i - (7 - freqScrollPosition) >= 0)
-            line2Buffer[i] = line2Buffer[i - (7 - freqScrollPosition)];
-          else
-            line2Buffer[i] = ' ';
+        line2Buffer[6] = 'k';
+        if (freqScrollPosition > 25)
+          freqScrollPosition = -1;
       }
       else
       {
-        for (int i = 0; i < 11; i++)
-          if (i + (freqScrollPosition - 7) <= 11)
-            line2Buffer[i] = line2Buffer[i + (freqScrollPosition - 7)];
-          else
-            line2Buffer[i] = ' ';
+        line2Buffer[10] = 'H';
+        line2Buffer[11] = 'z';
+    
+        if (freqScrollPosition < 7)
+        {
+          for (int i = 11; i >= 0; i--)
+            if (i - (7 - freqScrollPosition) >= 0)
+              line2Buffer[i] = line2Buffer[i - (7 - freqScrollPosition)];
+            else
+              line2Buffer[i] = ' ';
+        }
+        else
+        {
+          for (int i = 0; i < 11; i++)
+            if (i + (freqScrollPosition - 7) <= 11)
+              line2Buffer[i] = line2Buffer[i + (freqScrollPosition - 7)];
+            else
+              line2Buffer[i] = ' ';
+        }
       }
     }
-  }
-  line2Buffer[7] = ' ';
+    line2Buffer[7] = ' ';
+  } //check direct call by encoder
 
-  //Step
-  byte tmpStep = arTuneStep[tuneStepIndex -1];
-  for (int i = 10; i >= 8; i--) {
-    if (tmpStep > 0) {
-        line2Buffer[i] = tmpStep % 10 + 0x30;
-        tmpStep /= 10;
+  
+  if (isIFShift)
+  {
+    if (isDirectCall == 1)
+      for (int i = 0; i < 16; i++)
+        line2Buffer[i] = ' ';
+      
+      //IFShift Offset Value 
+    line2Buffer[8] = 'I';
+    line2Buffer[9] = 'F';
+
+    if (ifShiftValue == 0)
+    {
+      line2Buffer[10] = 'S';
+      line2Buffer[11] = ':';
+      line2Buffer[12] = 'O';
+      line2Buffer[13] = 'F';
+      line2Buffer[14] = 'F';
     }
     else
-      line2Buffer[i] = ' ';
-  }
-  line2Buffer[11] = 'H';
-  line2Buffer[12] = 'z';
-
-  line2Buffer[13] = ' ';
-  //if (
-  //Check CW Key cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
-  if (cwKeyType == 0)
-  {
-    line2Buffer[14] = 'S';
-    line2Buffer[15] = 'T';
-  }
-  else if (cwKeyType == 1)
-  {
-    line2Buffer[14] = 'I';
-    line2Buffer[15] = 'A';
+    {
+      line2Buffer[10] = ifShiftValue >= 0 ? '+' : 0;
+      line2Buffer[11] = 0;
+      line2Buffer[12] = ' ';
+    
+      //11, 12, 13, 14, 15
+      memset(b, 0, sizeof(b));
+      ltoa(ifShiftValue, b, DEC);
+      strncat(line2Buffer, b, 5);
+    }
+    
+    if (isDirectCall == 1)  //if call by encoder (not scheduler), immediate print value
+        printLine2(line2Buffer);    
   }
   else
   {
-    line2Buffer[14] = 'I';
-    line2Buffer[15] = 'B';
+    if (isDirectCall != 0)
+      return;
+      
+    //Step
+    byte tmpStep = arTuneStep[tuneStepIndex -1];
+    for (int i = 10; i >= 8; i--) {
+      if (tmpStep > 0) {
+          line2Buffer[i] = tmpStep % 10 + 0x30;
+          tmpStep /= 10;
+      }
+      else
+        line2Buffer[i] = ' ';
+    }
+    line2Buffer[11] = 'H';
+    line2Buffer[12] = 'z';
+  
+    line2Buffer[13] = ' ';
+    //if (
+    //Check CW Key cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
+    if (cwKeyType == 0)
+    {
+      line2Buffer[14] = 'S';
+      line2Buffer[15] = 'T';
+    }
+    else if (cwKeyType == 1)
+    {
+      line2Buffer[14] = 'I';
+      line2Buffer[15] = 'A';
+    }
+    else
+    {
+      line2Buffer[14] = 'I';
+      line2Buffer[15] = 'B';
+    }    
   }
+  
 }
 
+//meterType : 0 = S.Meter, 1 : P.Meter
+void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
+{
+  drawMeter(meterValue);  //call original source code
+  int lineNumber = 0;
+  if ((displayOption1 & 0x01) == 0x01)
+    lineNumber = 1;
+  
+  lcd.setCursor(drawPosition, lineNumber);
+
+  for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
+    lcd.write(lcdMeter[i]);
+
+}
+
+byte testValue = 0;
+char checkCount = 0;
 void idle_process()
 {
   //space for user graphic display
@@ -156,9 +217,20 @@ void idle_process()
   {
     //if line2DisplayStatus == 0 <-- this condition is clear Line, you can display any message
     if (line2DisplayStatus == 0 || (((displayOption1 & 0x04) == 0x04) && line2DisplayStatus == 2)) {
-      updateLine2Buffer();
-      printLine2(line2Buffer);
-      line2DisplayStatus = 2;
+      if (checkCount++ > 1)
+      {
+        updateLine2Buffer(0); //call by scheduler
+        printLine2(line2Buffer);
+        line2DisplayStatus = 2;
+        checkCount = 0;
+      }
+
+      //EX for Meters
+      /*
+      DisplayMeter(0, testValue++, 7);
+      if (testValue > 30)
+        testValue = 0;
+      */
     }
   }
 }

ubitx_20/ubitx_menu.ino

@@ -87,6 +87,8 @@ void menuBand(int btn){
             stepChangeCount = 0;
           }
         }
+
+      //setFrequency(frequency + 200000l);
       }
       else {  //original source
         if (knob < 0 && frequency > 3000000l)
@@ -205,10 +207,11 @@ void menuVfoToggle(int btn, char isUseDelayTime)
       }
 
       ritDisable();
+      setFrequency(frequency);
 
       if (isUseDelayTime == 1)        //Found Issue in wsjt-x Linux 32bit 
         delay_background(500, 0);
-        
+
       printLine2ClearAndUpdate();
       //exit the menu
       menuOn = 0;
@@ -238,6 +241,93 @@ void menuRitToggle(int btn){
   }
 }
 
+/*
+void menuIFSToggle(int btn){
+  if (!btn){
+    if (isIFShift == 1)
+      printLineF2(F("IF Shift:On, Off?"));
+    else
+      printLineF2(F("IF Shift:Off, On?"));
+  }
+  else {
+      if (isIFShift == 0){
+        printLineF2(F("IF Shift is ON"));
+        isIFShift = 1;
+      }
+      else{
+        printLineF2(F("IF Shift is OFF"));
+        isIFShift = 0;
+      }
+      menuOn = 0;
+      delay_background(500, 0);
+      printLine2ClearAndUpdate();
+  }
+}
+*/
+void menuIFSToggle(int btn){
+  int knob = 0;
+  char needApplyChangeValue = 1;
+  
+  if (!btn){
+    if (isIFShift == 1)
+      printLineF2(F("IF Shift Change?"));
+    else
+      printLineF2(F("IF Shift:Off, On?"));
+  }
+  else {
+      if (isIFShift == 0){
+        printLineF2(F("IF Shift is ON"));
+        delay_background(500, 0);
+        isIFShift = 1;
+      }
+
+      delay_background(500, 0);
+      updateLine2Buffer(1);
+      setFrequency(frequency);
+
+      //Off or Change Value
+      while(!btnDown() && digitalRead(PTT) == HIGH){
+        if (needApplyChangeValue ==1)
+        {
+          updateLine2Buffer(1);
+          setFrequency(frequency);
+        
+          if (cwMode == 0)
+            si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+          else
+            si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+
+          needApplyChangeValue = 0;
+        }
+        
+        knob = enc_read();
+        if (knob != 0){
+          if (knob < 0)
+            ifShiftValue -= 1l;
+          else if (knob > 0)
+            ifShiftValue += 1;
+
+          needApplyChangeValue = 1;
+        }
+      }
+
+      delay_background(500, 0); //for check Long Press function key
+      
+      if (btnDown() || digitalRead(PTT) == LOW || ifShiftValue == 0)
+      {
+        isIFShift = 0;
+        printLineF2(F("IF Shift is OFF"));
+        setFrequency(frequency);
+        delay_background(500, 0);
+      }
+      
+      menuOn = 0;
+      //delay_background(500, 0);
+      printLine2ClearAndUpdate();
+  }
+}
+
+
 /* 
 void menuSidebandToggle(int btn){
   if (!btn){
@@ -286,9 +376,10 @@ void menuSelectMode(int btn){
       selectModeType = 3;
 
     beforeMode = selectModeType;
-    
+
     while(!btnDown() && digitalRead(PTT) == HIGH){
       //Display Mode Name
+      printLineF1(F("LSB USB CWL CWU"));
       if (selectModeType == 0)
         printLineF1(F("LSB"));
       else if (selectModeType == 1)
@@ -352,9 +443,9 @@ void menuSelectMode(int btn){
     }
 
   if (cwMode == 0)
-    si5351bx_setfreq(0, usbCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
   else
-    si5351bx_setfreq(0, cwmCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
     
     setFrequency(frequency);
     delay_background(500, 0);
@@ -363,8 +454,6 @@ void menuSelectMode(int btn){
   }
 }
 
-
-
 void menuSplitOnOff(int btn){
   if (!btn){
     if (splitOn == 0)
@@ -389,8 +478,6 @@ void menuSplitOnOff(int btn){
   }
 }
 
-
-
 /*
 //Select CW Key Type by KD8CEC
 void menuSetupKeyType(int btn){
@@ -433,14 +520,15 @@ void menuSetupKeyType(int btn){
   int knob = 0;
   int selectedKeyType = 0;
   int moveStep = 0;
-  if (!btn && digitalRead(PTT) == HIGH){
+  if (!btn){
         printLineF2(F("Change Key Type?"));
   }
   else {
-    printLineF2(F("Press PTT to set"));
+    printLineF2(F("Press to set Key"));
     delay_background(500, 0);
     selectedKeyType = cwKeyType;
-    while(!btnDown() && digitalRead(PTT) == HIGH){
+    
+    while(!btnDown()){
 
       //Display Key Type
       if (selectedKeyType == 0)
@@ -470,24 +558,21 @@ void menuSetupKeyType(int btn){
       Check_Cat(0);  //To prevent disconnections
     }
     
-    //save the setting
-    if (digitalRead(PTT) == LOW){
-      printLineF2(F("CW Key Type set!"));
-      cwKeyType = selectedKeyType;
-      EEPROM.put(CW_KEY_TYPE, cwKeyType);
+    printLineF2(F("CW Key Type set!"));
+    cwKeyType = selectedKeyType;
+    EEPROM.put(CW_KEY_TYPE, cwKeyType);
 
-      if (cwKeyType == 0)
-        Iambic_Key = false;
+    if (cwKeyType == 0)
+      Iambic_Key = false;
+    else
+    {
+      Iambic_Key = true;
+      if (cwKeyType == 1)
+        keyerControl &= ~IAMBICB;
       else
-      {
-        Iambic_Key = true;
-        if (cwKeyType = 1)
-          keyerControl &= ~IAMBICB;
-        else
-          keyerControl |= IAMBICB;
-      }
-      delay_background(2000, 0);
+        keyerControl |= IAMBICB;
     }
+    delay_background(2000, 0);
     
     printLine2ClearAndUpdate();
     menuOn = 0;
@@ -649,7 +734,7 @@ void menuCWSpeed(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press to set WPm"));
     strcpy(b, "WPM:");
     itoa(wpm,c, 10);
     strcat(b, c);
@@ -679,12 +764,12 @@ void menuCWSpeed(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Speed set!"));
       cwSpeed = 1200/wpm;
       EEPROM.put(CW_SPEED, cwSpeed);
       delay_background(2000, 0);
-    }
+    //}
     printLine2ClearAndUpdate();
     menuOn = 0;
 }
@@ -724,7 +809,7 @@ void menuSetupCwDelay(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press, set Delay"));
     strcpy(b, "DELAY:");
     itoa(tmpCWDelay,c, 10);
     strcat(b, c);
@@ -752,12 +837,12 @@ void menuSetupCwDelay(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Delay set!"));
       cwDelayTime = tmpCWDelay / 10;
       EEPROM.put(CW_DELAY, cwDelayTime);
       delay_background(2000, 0);
-    }
+    //}
     printLine2ClearAndUpdate();
     menuOn = 0;
 }
@@ -773,7 +858,7 @@ void menuSetupTXCWInterval(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press, set Delay"));
     strcpy(b, "Start Delay:");
     itoa(tmpTXCWInterval,c, 10);
     strcat(b, c);
@@ -801,12 +886,12 @@ void menuSetupTXCWInterval(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Start set!"));
       delayBeforeCWStartTime = tmpTXCWInterval / 2;
       EEPROM.put(CW_START, delayBeforeCWStartTime);
       delay_background(2000, 0);
-    }
+    //}
     printLine2ClearAndUpdate();
     menuOn = 0;
 }
@@ -1190,7 +1275,7 @@ void doMenu(){
   //ADJUST TUNE STEP 
   if (btnDownTimeCount > (PRESS_ADJUST_TUNE / 50))
   {
-    printLineF1(F("Press Key to set"));
+    printLineF1(F("Press to set step"));
     isNeedDisplay = 1; //check to need display for display current value
     
     while (digitalRead(PTT) == HIGH && !btnDown())
@@ -1243,9 +1328,9 @@ void doMenu(){
     btnState = btnDown();
 
     if (i > 0){
-      if (modeCalibrate && select + i < 190)
+      if (modeCalibrate && select + i < 200)
         select += i;
-      if (!modeCalibrate && select + i < 80)
+      if (!modeCalibrate && select + i < 100)
         select += i;
     }
     //if (i < 0 && select - i >= 0)
@@ -1257,40 +1342,42 @@ void doMenu(){
     else if (select < 10)
       menuBand(btnState);
     else if (select < 20)
-      menuRitToggle(btnState);
-    else if (select < 30)
       menuVfoToggle(btnState, 1);
-    else if (select < 40)
+    else if (select < 30)
       menuSelectMode(btnState);
+    else if (select < 40)
+      menuRitToggle(btnState);
     else if (select < 50)
-      menuCWSpeed(btnState);
+      menuIFSToggle(btnState);
     else if (select < 60)
-      menuCWAutoKey(btnState);
+      menuCWSpeed(btnState);
     else if (select < 70)
-      menuSetup(btnState);
-    else if (select < 80 && !modeCalibrate)
-      menuExit(btnState);
-    else if (select < 90 && modeCalibrate)
-      menuSetupCalibration(btnState);   //crystal
-    else if (select < 100 && modeCalibrate)
-      menuSetupCarrier(btnState);       //lsb
-    else if (select < 110 && modeCalibrate)
-      menuSetupCWCarrier(btnState);       //lsb
-    else if (select < 120 && modeCalibrate)
-      menuSetupCwTone(btnState);
-    else if (select < 130 && modeCalibrate)
-      menuSetupCwDelay(btnState);
-    else if (select < 140 && modeCalibrate)
-      menuSetupTXCWInterval(btnState);
-    else if (select < 150 && modeCalibrate)
-      menuSetupKeyType(btnState);
-    else if (select < 160 && modeCalibrate)
-      menuADCMonitor(btnState);
-    else if (select < 170 && modeCalibrate)
       menuSplitOnOff(btnState);      //SplitOn / off
+    else if (select < 80)
+      menuCWAutoKey(btnState);
+    else if (select < 90)
+      menuSetup(btnState);
+    else if (select < 100)
+      menuExit(btnState);
+    else if (select < 110 && modeCalibrate)
+      menuSetupCalibration(btnState);   //crystal
+    else if (select < 120 && modeCalibrate)
+      menuSetupCarrier(btnState);       //lsb
+    else if (select < 130 && modeCalibrate)
+      menuSetupCWCarrier(btnState);       //lsb
+    else if (select < 140 && modeCalibrate)
+      menuSetupCwTone(btnState);
+    else if (select < 150 && modeCalibrate)
+      menuSetupCwDelay(btnState);
+    else if (select < 160 && modeCalibrate)
+      menuSetupTXCWInterval(btnState);
+    else if (select < 170 && modeCalibrate)
+      menuSetupKeyType(btnState);
     else if (select < 180 && modeCalibrate)
-      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
+      menuADCMonitor(btnState);
     else if (select < 190 && modeCalibrate)
+      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
+    else if (select < 200 && modeCalibrate)
       menuExit(btnState);
 
     Check_Cat(0);  //To prevent disconnections

ubitx_20/ubitx_si5351.ino

@@ -111,9 +111,9 @@ void initOscillators(){
   si5351bx_vcoa = (SI5351BX_XTAL * SI5351BX_MSA) + calibration; // apply the calibration correction factor
 
   if (cwMode == 0)
-    si5351bx_setfreq(0, usbCarrier);
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));
  else
-    si5351bx_setfreq(0, cwmCarrier);
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));
 }
 
 

ubitx_20/ubitx_ui.ino

@@ -25,8 +25,8 @@ int btnDown(){
  * The current reading of the meter is assembled in the string called meter
  */
 
-//char meter[17];
 
+/*
 const PROGMEM uint8_t s_meter_bitmap[] = {
   B00000,B00000,B00000,B00000,B00000,B00100,B00100,B11011,
   B10000,B10000,B10000,B10000,B10100,B10100,B10100,B11011,
@@ -35,7 +35,18 @@ const PROGMEM uint8_t s_meter_bitmap[] = {
   B00010,B00010,B00010,B00010,B00110,B00110,B00110,B11011,
   B00001,B00001,B00001,B00001,B00101,B00101,B00101,B11011
 };
-PGM_P ps_meter_bitmap = reinterpret_cast<PGM_P>(s_meter_bitmap);
+*/
+
+const PROGMEM uint8_t meters_bitmap[] = {
+  B10000,  B10000,  B10000,  B10000,  B10000,  B10000,  B10000,  B10000 ,   //custom 1
+  B11000,  B11000,  B11000,  B11000,  B11000,  B11000,  B11000,  B11000 ,   //custom 2
+  B11100,  B11100,  B11100,  B11100,  B11100,  B11100,  B11100,  B11100 ,   //custom 3
+  B11110,  B11110,  B11110,  B11110,  B11110,  B11110,  B11110,  B11110 ,   //custom 4
+  B11111,  B11111,  B11111,  B11111,  B11111,  B11111,  B11111,  B11111 ,   //custom 5
+  B01000,  B11100,  B01000,  B00000,  B10111,  B10101,  B10101,  B10111     //custom 6
+};
+
+PGM_P p_metes_bitmap = reinterpret_cast<PGM_P>(meters_bitmap);
 
 const PROGMEM uint8_t lock_bitmap[8] = {
   0b01110,
@@ -60,38 +71,56 @@ void initMeter(){
   lcd.createChar(0, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i);
   lcd.createChar(1, tmpbytes);
 
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 8);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 8);
   lcd.createChar(2, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 16);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 16);
   lcd.createChar(3, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 24);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 24);
   lcd.createChar(4, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 28);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 32);
   lcd.createChar(5, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 32);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 40);
   lcd.createChar(6, tmpbytes);
 }
 
-/**
- * The meter is drawn with special characters.
- * character 1 is used to simple draw the blocks of the scale of the meter
- * characters 2 to 6 are used to draw the needle in positions 1 to within the block
- * This displays a meter from 0 to 100, -1 displays nothing
- */
+//by KD8CEC
+//0 ~ 25 : 30 over : + 10
+void drawMeter(int needle) {
+  //5Char + O over
+  int drawCharLength = needle / 5;
+  int drawCharLengthLast = needle % 5;
+  int i;
 
- /*
+  for (i = 0; i < 5; i++) {
+    if (needle >= 5)
+      lcdMeter[i] = 5; //full
+    else if (needle > 0)
+      lcdMeter[i] = needle; //full
+    else  //0
+      lcdMeter[i] = 0x20;
+    
+    needle -= 5;
+  }
+
+  if (needle > 0)
+    lcdMeter[5] = 6;
+  else
+    lcdMeter[5] = 0x20;
+}
+
+/*
 void drawMeter(int8_t needle){
   int16_t best, i, s;
 
@@ -101,19 +130,18 @@ void drawMeter(int8_t needle){
   s = (needle * 4)/10;
   for (i = 0; i < 8; i++){
     if (s >= 5)
-      meter[i] = 1;
+      lcdMeter[i] = 1;
     else if (s >= 0)
-      meter[i] = 2 + s;
+      lcdMeter[i] = 2 + s;
     else
-      meter[i] = 1;
+      lcdMeter[i] = 1;
     s = s - 5;
   }
   if (needle >= 40)
-    meter[i-1] = 6;
-  meter[i] = 0;
+    lcdMeter[i-1] = 6;
+  lcdMeter[i] = 0;
 }
 */
-
 // The generic routine to display one line on the LCD 
 void printLine(unsigned char linenmbr, const char *c) {
   if ((displayOption1 & 0x01) == 0x01)