Merge pull request #18 from phdlee/version0.34

Version0.34

README.md

@@ -1,19 +1,14 @@
 #IMPORTANT INFORMATION
 ----------------------------------------------------------------------------
-- Beta 0.26 and Beta 0.261, Beta 0.262, Beta 0.27 is complete test
-- You can download and use it.
+- 0.33 Version Test only download. almost complete
+- Beta 0.26 and Beta 0.261, Beta 0.262,0.27 is complete test, 0.28 is tested.
+- 0.31 is tested but has not critical bug
+- You can download and use it (Release section).
 
 #NOTICE
 ----------------------------------------------------------------------------
 I received uBITX a month ago and found that many features are required, and began coding with the idea of implementing minimal functionality as a general hf transceiver rather than an experimental device.
 
-- fixed bugs...
-- Diallock for uBITX's sensitive encoders
-- built in softare Memory keyer and cw options control for CW communication
-- Implementation of CAT communication protocol for Digital Communication (as FT8, JT65, etc)
-- Delay Options for external Linear.
-- and more...
-
 Most of the basic functions of the HF transceiver I thought were implemented.
 The minimum basic specification for uBITX to operate as a radio, I think it is finished.
 So I will release the 0.27 version and if I do not see the bug anymore, I will try to change the version name to 1.0.
@@ -46,6 +41,41 @@ Prepared or finished tasks for the next version
                   
 ----------------------------------------------------------------------------
 ## REVISION RECORD
+0.33
+  - Added CWL, CWU Mode, (dont complete test yet)
+  - fixed VFO changed bug.
+  - Added Additional BFO for CWL, CWL
+  - Added IF Shift
+  - Change confirmation key PTT -> function key (not critical menus)
+  - Change CW Key Select type, (toggle -> select by dial)
+  
+0.32
+  - Added function Scroll Frequencty on upper line
+  - Added Example code for Draw meter and remarked (you can see and use this code in source codes)
+  - Added Split function, just toggle VFOs when TX/RX
+
+0.31
+  - Fixed CW ADC Range error
+  - Display Message on Upper Line (anothor VFO Frequency, Tune Step, Selected Key Type)
+
+0.30
+ - implemented the function to monitor the value of all analog inputs. This allows you to monitor the status of the CW keys connected to your uBITX. 
+ - possible to set the ADC range for CW Keying. If no setting is made, it will have the same range as the original code. If you set the CW Keying ADC Values using uBITX Manager 0.3, you can reduce the key error.
+ - Added the function to select Straight Key, IAMBICA, IAMBICB key from the menu.
+ - default Band select is Ham Band mode, if you want common type, long press function key at band select menu, uBITX Manager can be used to modify frequencies to suit your country.
+
+0.29
+ - Remove the use of initialization values in BFO settings - using crruent value, if factory reset
+ - Select Tune Step, default 0, 20, 50, 100, 200, Use the uBITX Manager to set the steps value you want. You can select Step by pressing and holding the Function Key (1sec ~ 2sec).
+ - Modify Dial Lock Function, Press the Function key for more than 3 seconds to toggle dial lock.
+ - created a new frequency tune method. remove original source codes, Threshold has been applied to reduce malfunction. checked the continuity of the user operating to make natural tune possible.
+ - stabilize and remove many warning messages - by Pullrequest and merge
+ - Changed cw keying method. removed the original code and applied Ron's code and Improved compatibility with original hardware and CAT commnication. It can be used without modification of hardware.
+ 
+0.28
+ - Fixed CAT problem with hamlib on Linux
+ - restore Protocol autorecovery logic
+
 0.27 
    (First alpha test version, This will be renamed to the major version 1.0)
  - Dual VFO Dial Lock (vfoA Dial lock)

ubitx_20/cat_libs.ino

@@ -130,10 +130,21 @@ void CatGetFreqMode(unsigned long freq, byte fromType)
   }
 
   //Mode Check
-  if (isUSB)
-    CAT_BUFF[4] = CAT_MODE_USB;
+  if (cwMode == 0)
+  {
+    if (isUSB)
+      CAT_BUFF[4] = CAT_MODE_USB;
+    else
+      CAT_BUFF[4] = CAT_MODE_LSB;
+  }
+  else if (cwMode == 1)
+  {
+      CAT_BUFF[4] = CAT_MODE_CW;
+  }
   else
-    CAT_BUFF[4] = CAT_MODE_LSB;
+  {
+      CAT_BUFF[4] = CAT_MODE_CW;
+  }
 
   SendCatData(5);
 }
@@ -198,12 +209,18 @@ void CatSetMode(byte tmpMode, byte fromType)
   
   if (!inTx)
   {
-    if (tmpMode == CAT_MODE_USB)
+    if (tmpMode == CAT_MODE_CW)
     {
+      cwMode = 1;
+    }
+    else if (tmpMode == CAT_MODE_USB)
+    {
+      cwMode = 0;
       isUSB = true;
     }
     else
     {
+      cwMode = 0;
       isUSB = false;
     }
 
@@ -358,10 +375,21 @@ void ReadEEPRom_FT817(byte fromType)
       CAT_BUFF[1] = 0xB2;
       break;      case 0x69 : //FM Mic (#29)  Contains 0-100 (decimal) as displayed
     case 0x78 :
-      if (isUSB)
-        CAT_BUFF[0] = CAT_MODE_USB;
-      else
-        CAT_BUFF[0] = CAT_MODE_LSB;
+      if (cwMode == 0)
+      {
+        if (isUSB)
+          CAT_BUFF[0] = CAT_MODE_USB;
+        else
+          CAT_BUFF[0] = CAT_MODE_LSB;
+      }
+      else if (cwMode == 1)
+      {
+          CAT_BUFF[0] = CAT_MODE_CW;
+      }
+      else if (cwMode == 2)
+      {
+          CAT_BUFF[0] = CAT_MODE_CW;
+      }
         
       if (CAT_BUFF[0] != 0) CAT_BUFF[0] = 1 << 5;
       break;
@@ -384,7 +412,7 @@ void ReadEEPRom_FT817(byte fromType)
       //7A  6 ? ?
       //7A  7 SPL On/Off  0 = Off, 1 = On
 
-      CAT_BUFF[0] = (isSplitOn ? 0xFF : 0x7F);
+      CAT_BUFF[0] = (splitOn ? 0xFF : 0x7F);
       break;
     case 0xB3 : //
       CAT_BUFF[0] = 0x00;
@@ -472,7 +500,7 @@ void WriteEEPRom_FT817(byte fromType)
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
         delay(300);                       //If timeout errors occur in the calling software, remove them
-        printLine2("");                   //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
+        clearLine2();
       }
       break;
 
@@ -484,7 +512,8 @@ void WriteEEPRom_FT817(byte fromType)
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
         delay(300);                   //If timeout errors occur in the calling software, remove them
-        printLine2("");               //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
+        clearLine2();
+        line2DisplayStatus = 0;
       }
       break;
 
@@ -504,7 +533,7 @@ void WriteEEPRom_FT817(byte fromType)
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_DELAY, cwDelayTime);
       delay(300);
-      printLine2("");
+      clearLine2();
       break;
     case 0x62 : //
       //5-0  CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
@@ -513,7 +542,7 @@ void WriteEEPRom_FT817(byte fromType)
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_SPEED, cwSpeed);
       delay(300);
-      printLine2("");
+      clearLine2();
 
       break;
       /*

ubitx_20/cw_autokey.ino

@@ -298,8 +298,12 @@ void controlAutoCW(){
           }
           
           printLineFromEEPRom(0, 2, cwStartIndex + displayScrolStep + CW_DATA_OFSTADJ, cwEndIndex + CW_DATA_OFSTADJ); 
+
+          byte diplayAutoCWLine = 0;
+          if ((displayOption1 & 0x01) == 0x01)
+            diplayAutoCWLine = 1;
           
-          lcd.setCursor(0,0);
+          lcd.setCursor(0, diplayAutoCWLine);
           lcd.write(byteToChar(selectedCWTextIndex));
           lcd.write(':');
           isNeedScroll = (cwEndIndex - cwStartIndex) > 14 ? 1 : 0;
@@ -361,6 +365,11 @@ void controlAutoCW(){
         //check interval time, if you want adjust interval between chars, modify below
         if (isAutoCWHold == 0 && (millis() - autoCWbeforeTime > cwSpeed * 3))
         {
+          if (!inTx){                                           //if not TX Status, change RX -> TX
+            keyDown = 0;
+            startTx(TX_CW, 0);  //disable updateDisplay Command for reduce latency time
+          }
+          
           sendCWChar(EEPROM.read(CW_AUTO_DATA + autoCWSendCharIndex++));
 
           if (autoCWSendCharIndex > autoCWSendCharEndIndex) {          //finish auto cw send

ubitx_20/ubitx_20.ino

@@ -84,6 +84,7 @@
 #define PTT   (A3)
 #define ANALOG_KEYER (A6)
 #define ANALOG_SPARE (A7)
+#define ANALOG_SMETER (A7)  //by KD8CEC
 
 /** 
  * The Raduino board is the size of a standard 16x2 LCD panel. It has three connectors:
@@ -150,6 +151,7 @@ int count = 0;          //to generally count ticks, loops, etc
 #define CW_SPEED 28
 
 //AT328 has 1KBytes EEPROM
+#define CW_CAL 252
 #define VFO_A_MODE 256
 #define VFO_B_MODE 257
 #define CW_DELAY 258
@@ -158,7 +160,8 @@ int count = 0;          //to generally count ticks, loops, etc
 #define TX_TUNE_TYPE 261  //
 #define HAM_BAND_RANGE 262 //FROM (2BYTE) TO (2BYTE) * 10 = 40byte
 #define HAM_BAND_FREQS 302 //40, 1 BAND = 4Byte most bit is mode
-#define TUNING_STEP    342   //TUNING STEP * 6 (index 1 + STEPS 5)
+#define TUNING_STEP    342   //TUNING STEP * 6 (index 1 + STEPS 5)  //1STEP : 
+  
 
 //for reduce cw key error, eeprom address
 #define CW_ADC_MOST_BIT1 348   //most 2bits of  DOT_TO , DOT_FROM, ST_TO, ST_FROM
@@ -172,6 +175,10 @@ int count = 0;          //to generally count ticks, loops, etc
 #define CW_ADC_DASH_TO   355   //CW ADC Range DASH to           (Lower 8 bit)
 #define CW_ADC_BOTH_FROM 356   //CW ADC Range BOTH from         (Lower 8 bit)
 #define CW_ADC_BOTH_TO   357   //CW ADC Range BOTH to           (Lower 8 bit)
+#define CW_KEY_TYPE      358
+
+#define DISPLAY_OPTION1  361   //Display Option1
+#define DISPLAY_OPTION2  362   //Display Option2
 
 //Check Firmware type and version
 #define FIRMWAR_ID_ADDR 776 //776 : 0x59, 777 :0x58, 778 : 0x68 : Id Number, if not found id, erase eeprom(32~1023) for prevent system error.
@@ -227,7 +234,7 @@ int count = 0;          //to generally count ticks, loops, etc
 char ritOn = 0;
 char vfoActive = VFO_A;
 int8_t meter_reading = 0; // a -1 on meter makes it invisible
-unsigned long vfoA=7150000L, vfoB=14200000L, sideTone=800, usbCarrier;
+unsigned long vfoA=7150000L, vfoB=14200000L, sideTone=800, usbCarrier, cwmCarrier;
 unsigned long vfoA_eeprom, vfoB_eeprom; //for protect eeprom life
 unsigned long frequency, ritRxFrequency, ritTxFrequency;  //frequency is the current frequency on the dial
 
@@ -244,7 +251,6 @@ byte saveIntervalSec = 10;  //second
 unsigned long saveCheckTime = 0;
 unsigned long saveCheckFreq = 0;
 
-bool isSplitOn = false;
 byte cwDelayTime = 60;
 byte delayBeforeCWStartTime = 50;
 
@@ -255,9 +261,12 @@ byte sideToneSub = 0;
 //DialLock
 byte isDialLock = 0;  //000000[0]vfoB [0]vfoA 0Bit : A, 1Bit : B
 byte isTxType = 0;    //000000[0 - isSplit] [0 - isTXStop]
-byte arTuneStep[5];
+long arTuneStep[5];
 byte tuneStepIndex; //default Value 0, start Offset is 0 because of check new user
 
+byte displayOption1 = 0;
+byte displayOption2 = 0;
+
 //CW ADC Range
 int cwAdcSTFrom = 0;
 int cwAdcSTTo = 0;
@@ -267,6 +276,10 @@ int cwAdcDashFrom = 0;
 int cwAdcDashTo = 0;
 int cwAdcBothFrom = 0;
 int cwAdcBothTo = 0;
+byte cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
+bool Iambic_Key = true;
+#define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
+unsigned char keyerControl = IAMBICB;
 
 //Variables for auto cw mode
 byte isCWAutoMode = 0;          //0 : none, 1 : CW_AutoMode_Menu_Selection, 2 : CW_AutoMode Sending
@@ -286,9 +299,13 @@ byte userCallsignLength = 0;    //7 : display callsign at system startup, 6~0 :
  */
 boolean txCAT = false;        //turned on if the transmitting due to a CAT command
 char inTx = 0;                //it is set to 1 if in transmit mode (whatever the reason : cw, ptt or cat)
-char splitOn = 0;             //working split, uses VFO B as the transmit frequency, (NOT IMPLEMENTED YET)
+char splitOn = 0;             //working split, uses VFO B as the transmit frequency
 char keyDown = 0;             //in cw mode, denotes the carrier is being transmitted
 char isUSB = 0;               //upper sideband was selected, this is reset to the default for the 
+
+char cwMode = 0;              //compatible original source, and extend mode //if cwMode == 0, mode check : isUSB, cwMode > 0, mode Check : cwMode
+                              //iscwMode = 0 : ssbmode, 1 :cwl, 2 : cwu, 3 : cwn (none tx)
+                              
                               //frequency when it crosses the frequency border of 10 MHz
 byte menuOn = 0;              //set to 1 when the menu is being displayed, if a menu item sets it to zero, the menu is exited
 unsigned long cwTimeout = 0;  //milliseconds to go before the cw transmit line is released and the radio goes back to rx mode
@@ -296,6 +313,14 @@ unsigned long dbgCount = 0;   //not used now
 unsigned char txFilter = 0;   //which of the four transmit filters are in use
 boolean modeCalibrate = false;//this mode of menus shows extended menus to calibrate the oscillators and choose the proper
                               //beat frequency
+
+unsigned long beforeIdle_ProcessTime = 0; //for check Idle time
+byte line2DisplayStatus = 0;  //0:Clear, 1 : menu, 1: DisplayFrom Idle, 
+char lcdMeter[17];
+
+byte isIFShift = 0;     //1 = ifShift, 2 extend
+long ifShiftValue = 0;  //
+                              
 /**
  * Below are the basic functions that control the uBitx. Understanding the functions before 
  * you start hacking around
@@ -348,22 +373,24 @@ void setNextHamBandFreq(unsigned long f, char moveDirection)
 
   EEPROM.get(HAM_BAND_FREQS + 4 * findedIndex, resultFreq);
   
-  loadMode = (byte)(resultFreq >> 30);
-  resultFreq = resultFreq & 0x3FFFFFFF;
+  //loadMode = (byte)(resultFreq >> 30);
+  //resultFreq = resultFreq & 0x3FFFFFFF;
+  loadMode = (byte)(resultFreq >> 29);
+  resultFreq = resultFreq & 0x1FFFFFFF;
   
   if ((resultFreq / 1000) < hamBandRange[(unsigned char)findedIndex][0] || (resultFreq / 1000) > hamBandRange[(unsigned char)findedIndex][1])
     resultFreq = (unsigned long)(hamBandRange[(unsigned char)findedIndex][0]) * 1000;
 
   setFrequency(resultFreq);
-  byteWithFreqToMode(loadMode);
+  byteToMode(loadMode, 1);
 }
 
 void saveBandFreqByIndex(unsigned long f, unsigned long mode, char bandIndex) {
   if (bandIndex >= 0)
-    EEPROM.put(HAM_BAND_FREQS + 4 * bandIndex, (f & 0x3FFFFFFF) | (mode << 30) );
+    //EEPROM.put(HAM_BAND_FREQS + 4 * bandIndex, (f & 0x3FFFFFFF) | (mode << 30) );
+    EEPROM.put(HAM_BAND_FREQS + 4 * bandIndex, (f & 0x1FFFFFFF) | (mode << 29) );
 }
 
-
 /*
   KD8CEC
   When using the basic delay of the Arduino, the program freezes.
@@ -457,13 +484,27 @@ void setFrequency(unsigned long f){
   
   setTXFilters(f);
 
-  if (isUSB){
-    si5351bx_setfreq(2, SECOND_OSC_USB - usbCarrier + f);
-    si5351bx_setfreq(1, SECOND_OSC_USB);
+  if (cwMode == 0)
+  {
+    if (isUSB){
+      si5351bx_setfreq(2, SECOND_OSC_USB - usbCarrier + f  + (isIFShift ? ifShiftValue : 0));
+      si5351bx_setfreq(1, SECOND_OSC_USB);
+    }
+    else{
+      si5351bx_setfreq(2, SECOND_OSC_LSB + usbCarrier + f + (isIFShift ? ifShiftValue : 0));
+      si5351bx_setfreq(1, SECOND_OSC_LSB);
+    }
   }
-  else{
-    si5351bx_setfreq(2, SECOND_OSC_LSB + usbCarrier + f);
-    si5351bx_setfreq(1, SECOND_OSC_LSB);
+  else
+  {
+    if (cwMode == 1){ //CWL
+      si5351bx_setfreq(2, SECOND_OSC_LSB + cwmCarrier + f + (isIFShift ? ifShiftValue : 0));
+      si5351bx_setfreq(1, SECOND_OSC_LSB);
+    }
+    else{             //CWU
+      si5351bx_setfreq(2, SECOND_OSC_USB - cwmCarrier + f + (isIFShift ? ifShiftValue : 0));
+      si5351bx_setfreq(1, SECOND_OSC_USB);
+    }
   }
   
   frequency = f;
@@ -492,6 +533,21 @@ void startTx(byte txMode, byte isDisplayUpdate){
     ritRxFrequency = frequency;
     setFrequency(ritTxFrequency);
   }
+  else if (splitOn == 1) {
+      if (vfoActive == VFO_B) {
+        vfoActive = VFO_A;
+        frequency = vfoA;
+        byteToMode(vfoA_mode, 0);
+      }
+      else if (vfoActive == VFO_A){
+        vfoActive = VFO_B;
+        frequency = vfoB;
+        byteToMode(vfoB_mode, 0);
+      }
+
+      setFrequency(frequency);
+  } //end of else
+  
 
   if (txMode == TX_CW){
     //turn off the second local oscillator and the bfo
@@ -501,10 +557,22 @@ void startTx(byte txMode, byte isDisplayUpdate){
     //shif the first oscillator to the tx frequency directly
     //the key up and key down will toggle the carrier unbalancing
     //the exact cw frequency is the tuned frequency + sidetone
-    if (isUSB)
-      si5351bx_setfreq(2, frequency + sideTone);
-    else
-      si5351bx_setfreq(2, frequency - sideTone); 
+
+    if (cwMode == 0)
+    {
+      if (isUSB)
+        si5351bx_setfreq(2, frequency + sideTone);
+      else
+        si5351bx_setfreq(2, frequency - sideTone); 
+    }
+    else if (cwMode == 1) //CWL
+    {
+        si5351bx_setfreq(2, frequency - sideTone); 
+    }
+    else  //CWU
+    {
+        si5351bx_setfreq(2, frequency + sideTone);
+    }
   }
 
   //reduce latency time when begin of CW mode
@@ -516,10 +584,28 @@ void stopTx(){
   inTx = 0;
 
   digitalWrite(TX_RX, 0);           //turn off the tx
-  si5351bx_setfreq(0, usbCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+  else
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
 
   if (ritOn)
     setFrequency(ritRxFrequency);
+  else if (splitOn == 1) {
+      //vfo Change
+      if (vfoActive == VFO_B){
+        vfoActive = VFO_A;
+        frequency = vfoA;
+        byteToMode(vfoA_mode, 0);
+      }
+      else if (vfoActive == VFO_A){
+        vfoActive = VFO_B;
+        frequency = vfoB;
+        byteToMode(vfoB_mode, 0);
+      }
+      setFrequency(frequency);
+  } //end of else
   else
     setFrequency(frequency);
   
@@ -669,9 +755,8 @@ void doRIT(){
     updateDisplay();
   }
 }
-
-/**
- save Frequency and mode to eeprom
+/*
+ save Frequency and mode to eeprom for Auto Save with protected eeprom cycle, by kd8cec
  */
 void storeFrequencyAndMode(byte saveType)
 {
@@ -703,6 +788,22 @@ void storeFrequencyAndMode(byte saveType)
   }
 }
 
+//calculate step size from 1 byte, compatible uBITX Manager, by KD8CEC
+unsigned int byteToSteps(byte srcByte) {
+    byte powerVal = (byte)(srcByte >> 6);
+    unsigned int baseVal = srcByte & 0x3F;
+
+    if (powerVal == 1)
+        return baseVal * 10;
+    else if (powerVal == 2)
+        return baseVal * 100;
+    else if (powerVal == 3)
+        return baseVal * 1000;
+    else
+        return baseVal;
+}
+
+
 /**
  * The settings are read from EEPROM. The first time around, the values may not be 
  * present or out of range, in this case, some intelligent defaults are copied into the 
@@ -745,6 +846,7 @@ void initSettings(){
   if (EEPROM.read(VERSION_ADDRESS) != VERSION_NUM)
     EEPROM.write(VERSION_ADDRESS, VERSION_NUM);
 
+  EEPROM.get(CW_CAL, cwmCarrier);
 
   //for Save VFO_A_MODE to eeprom
   //0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
@@ -756,6 +858,24 @@ void initSettings(){
 
   //CW interval between TX and CW Start
   EEPROM.get(CW_START, delayBeforeCWStartTime);
+  EEPROM.get(CW_KEY_TYPE, cwKeyType);
+  if (cwKeyType > 2)
+    cwKeyType = 0;
+
+  if (cwKeyType == 0)
+    Iambic_Key = false;
+  else
+  {
+    Iambic_Key = true;
+    if (cwKeyType == 1)
+      keyerControl &= ~IAMBICB;
+    else
+      keyerControl |= IAMBICB;
+  }
+    
+
+  EEPROM.get(DISPLAY_OPTION1, displayOption1);
+  EEPROM.get(DISPLAY_OPTION2, displayOption2);
 
   //User callsign information
   if (EEPROM.read(USER_CALLSIGN_KEY) == 0x59)
@@ -790,7 +910,7 @@ void initSettings(){
     hamBandRange[0][0] = 1810; hamBandRange[0][1] = 2000; 
     hamBandRange[1][0] = 3500; hamBandRange[1][1] = 3800; 
     hamBandRange[2][0] = 5351; hamBandRange[2][1] = 5367; 
-    hamBandRange[3][0] = 7000; hamBandRange[3][1] = 7200; 
+    hamBandRange[3][0] = 7000; hamBandRange[3][1] = 7300;   //region 1
     hamBandRange[4][0] = 10100; hamBandRange[4][1] = 10150; 
     hamBandRange[5][0] = 14000; hamBandRange[5][1] = 14350; 
     hamBandRange[6][0] = 18068; hamBandRange[6][1] = 18168; 
@@ -804,8 +924,8 @@ void initSettings(){
   findedValidValueCount = 0;
   EEPROM.get(TUNING_STEP, tuneStepIndex);
   for (byte i = 0; i < 5; i++) {
-    arTuneStep[i] = EEPROM.read(TUNING_STEP + i + 1);
-    if (arTuneStep[i] >= 1 && arTuneStep[i] < 251) //Maximum 250 for check valid Value
+    arTuneStep[i] = byteToSteps(EEPROM.read(TUNING_STEP + i + 1));
+    if (arTuneStep[i] >= 1 && arTuneStep[i] <= 60000) //Maximum 650 for check valid Value
        findedValidValueCount++;
   }
 
@@ -875,15 +995,18 @@ void initSettings(){
   //original code with modified by kd8cec
   if (usbCarrier > 12010000l || usbCarrier < 11990000l)
     usbCarrier = 11995000l;
+
+  if (cwmCarrier > 12010000l || cwmCarrier < 11990000l)
+    cwmCarrier = 11995000l;
     
   if (vfoA > 35000000l || 3500000l > vfoA) {
      vfoA = 7150000l;
-     vfoA_mode = 2;
+     vfoA_mode = 2; //LSB
   }
   
   if (vfoB > 35000000l || 3500000l > vfoB) {
      vfoB = 14150000l;  
-     vfoB_mode = 3;
+     vfoB_mode = 3; //USB
   }
   //end of original code section
 
@@ -923,6 +1046,7 @@ void initPorts(){
 
   pinMode(PTT, INPUT_PULLUP);
   pinMode(ANALOG_KEYER, INPUT_PULLUP);
+  pinMode(ANALOG_SMETER, INPUT); //by KD8CEC
 
   pinMode(CW_TONE, OUTPUT);  
   digitalWrite(CW_TONE, 0);
@@ -958,7 +1082,7 @@ void setup()
   
   //Serial.begin(9600);
   lcd.begin(16, 2);
-  printLineF(1, F("CECBT v0.30")); 
+  printLineF(1, F("CECBT v0.35")); 
 
   Init_Cat(38400, SERIAL_8N1);
   initMeter(); //not used in this build
@@ -972,15 +1096,16 @@ void setup()
   else {
     printLineF(0, F("uBITX v0.20")); 
     delay(500);
-    printLine2(""); 
+    clearLine2();
   }
   
   initPorts();     
+
+  byteToMode(vfoA_mode, 0);
   initOscillators();
 
   frequency = vfoA;
   saveCheckFreq = frequency;  //for auto save frequency
-  byteToMode(vfoA_mode);
   setFrequency(vfoA);
   updateDisplay();
 
@@ -989,13 +1114,11 @@ void setup()
 }
 
 
-/**
- * The loop checks for keydown, ptt, function button and tuning.
- */
 //for debug
 int dbgCnt = 0;
 byte flasher = 0;
 
+//Auto save Frequency and Mode with Protected eeprom life by KD8CEC
 void checkAutoSaveFreqMode()
 {
   //when tx or ritOn, disable auto save
@@ -1044,9 +1167,16 @@ void loop(){
   if (!inTx){
     if (ritOn)
       doRIT();
+    //else if (isIFShift)
+    //  doIFShift();
     else 
       doTuningWithThresHold();
-  }
+
+    if (isCWAutoMode == 0 && beforeIdle_ProcessTime < millis() - 250) {
+      idle_process();
+      beforeIdle_ProcessTime = millis();
+    }
+  } //end of check TX Status
 
   //we check CAT after the encoder as it might put the radio into TX
   Check_Cat(inTx? 1 : 0);

ubitx_20/ubitx_factory_alignment.ino

@@ -14,6 +14,7 @@ void btnWaitForClick(){
 void factory_alignment(){
         
   factoryCalibration(1);
+  line2DisplayStatus = 1;
 
   if (calibration == 0){
     printLine2("Setup Aborted");
@@ -36,6 +37,7 @@ void factory_alignment(){
 
   
   printLine2("#3:Test 3.5MHz");
+  cwMode = 0;
   isUSB = false;
   setFrequency(3500000l);
   updateDisplay();
@@ -58,6 +60,7 @@ void factory_alignment(){
   btnWaitForClick();
   printLine2("#5:Test 14MHz");
 
+  cwMode = 0;
   isUSB = true;
   setFrequency(14000000l);
   updateDisplay();
@@ -79,6 +82,7 @@ void factory_alignment(){
   printLine2("Alignment done");
   delay(1000);
 
+  cwMode = 0;
   isUSB = false;
   setFrequency(7150000l);
   updateDisplay();  

ubitx_20/ubitx_idle.ino

@@ -0,0 +1,257 @@
+/*************************************************************************
+  KD8CEC's uBITX Idle time Processing
+  Functions that run at times that do not affect TX, CW, and CAT
+  It is called in 1/10 time unit.
+-----------------------------------------------------------------------------
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+**************************************************************************/
+char line2Buffer[16];
+//KD8CEC 200Hz ST
+//L14.150 200Hz ST
+//U14.150 +150khz
+int freqScrollPosition = 0;
+//Example Line2 Optinal Display
+//immediate execution, not call by scheulder
+void updateLine2Buffer(char isDirectCall)
+{
+  unsigned long tmpFreq = 0;
+  if (isDirectCall == 0)
+  {
+    if (ritOn)
+    {
+      line2Buffer[0] = 'R';
+      line2Buffer[1] = 'i';
+      line2Buffer[2] = 't';
+      line2Buffer[3] = 'T';
+      line2Buffer[4] = 'X';
+      line2Buffer[5] = ':';
+  
+      //display frequency
+      tmpFreq = ritTxFrequency;
+      for (int i = 15; i >= 6; i--) {
+        if (tmpFreq > 0) {
+          if (i == 12 || i == 8) line2Buffer[i] = '.';
+          else {
+            line2Buffer[i] = tmpFreq % 10 + 0x30;
+            tmpFreq /= 10;
+          }
+        }
+        else
+          line2Buffer[i] = ' ';
+      }
+  
+      return;
+    } //end of ritOn display
+
+    //======================================================
+    //other VFO display
+    //======================================================
+    if (vfoActive == VFO_B)
+    {
+      tmpFreq = vfoA;
+      //line2Buffer[0] = 'A';
+    }
+    else 
+    {
+      tmpFreq = vfoB;
+      //line2Buffer[0] = 'B';
+    }
+  
+    // EXAMPLE 1 & 2
+    //U14.150.100
+    //display frequency
+    for (int i = 9; i >= 0; i--) {
+      if (tmpFreq > 0) {
+        if (i == 2 || i == 6) line2Buffer[i] = '.';
+        else {
+          line2Buffer[i] = tmpFreq % 10 + 0x30;
+          tmpFreq /= 10;
+        }
+      }
+      else
+        line2Buffer[i] = ' ';
+    }
+  
+    //EXAMPLE #1
+    if ((displayOption1 & 0x04) == 0x00)  //none scroll display
+      line2Buffer[6] = 'k';
+    else
+    {
+      //example #2
+      if (freqScrollPosition++ > 18)    //none scroll display time
+      {
+        line2Buffer[6] = 'k';
+        if (freqScrollPosition > 25)
+          freqScrollPosition = -1;
+      }
+      else                              //scroll frequency 
+      {
+        line2Buffer[10] = 'H';
+        line2Buffer[11] = 'z';
+    
+        if (freqScrollPosition < 7)   
+        {
+          for (int i = 11; i >= 0; i--)
+            if (i - (7 - freqScrollPosition) >= 0)
+              line2Buffer[i] = line2Buffer[i - (7 - freqScrollPosition)];
+            else
+              line2Buffer[i] = ' ';
+        }
+        else
+        {
+          for (int i = 0; i < 11; i++)
+            if (i + (freqScrollPosition - 7) <= 11)
+              line2Buffer[i] = line2Buffer[i + (freqScrollPosition - 7)];
+            else
+              line2Buffer[i] = ' ';
+        }
+      }
+    } //scroll
+    
+    line2Buffer[7] = ' ';
+  } //check direct call by encoder
+  
+  if (isIFShift)
+  {
+    if (isDirectCall == 1)
+      for (int i = 0; i < 16; i++)
+        line2Buffer[i] = ' ';
+      
+      //IFShift Offset Value 
+    line2Buffer[8] = 'I';
+    line2Buffer[9] = 'F';
+
+    if (ifShiftValue == 0)
+    {
+      line2Buffer[10] = 'S';
+      line2Buffer[11] = ':';
+      line2Buffer[12] = 'O';
+      line2Buffer[13] = 'F';
+      line2Buffer[14] = 'F';
+    }
+    else
+    {
+      line2Buffer[10] = ifShiftValue >= 0 ? '+' : 0;
+      line2Buffer[11] = 0;
+      line2Buffer[12] = ' ';
+    
+      //11, 12, 13, 14, 15
+      memset(b, 0, sizeof(b));
+      ltoa(ifShiftValue, b, DEC);
+      strncat(line2Buffer, b, 5);
+    }
+    
+    if (isDirectCall == 1)  //if call by encoder (not scheduler), immediate print value
+        printLine2(line2Buffer);    
+  }       // end of display IF
+  else    // step display
+  {
+    if (isDirectCall != 0)
+      return;
+
+    memset(&line2Buffer[8], ' ', 8);
+    //Step
+    long tmpStep = arTuneStep[tuneStepIndex -1];
+    
+    byte isStepKhz = 0;
+    if (tmpStep >= 1000)
+    {
+      isStepKhz = 2;
+    }
+      
+    for (int i = 10; i >= 8 - isStepKhz; i--) {
+      if (tmpStep > 0) {
+          line2Buffer[i + isStepKhz] = tmpStep % 10 + 0x30;
+          tmpStep /= 10;
+      }
+      else
+        line2Buffer[i +isStepKhz] = ' ';
+    }
+    //if (isStepKhz == 1)
+    //  line2Buffer[10] = 'k';
+
+    if (isStepKhz == 0)
+    {
+      line2Buffer[11] = 'H';
+      line2Buffer[12] = 'z';
+    }
+  
+    line2Buffer[13] = ' ';
+    //if (
+    //Check CW Key cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
+    if (cwKeyType == 0)
+    {
+      line2Buffer[14] = 'S';
+      line2Buffer[15] = 'T';
+    }
+    else if (cwKeyType == 1)
+    {
+      line2Buffer[14] = 'I';
+      line2Buffer[15] = 'A';
+    }
+    else
+    {
+      line2Buffer[14] = 'I';
+      line2Buffer[15] = 'B';
+    }    
+  }
+  
+}
+
+//meterType : 0 = S.Meter, 1 : P.Meter
+void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
+{
+  drawMeter(meterValue);  //call original source code
+  int lineNumber = 0;
+  if ((displayOption1 & 0x01) == 0x01)
+    lineNumber = 1;
+  
+  lcd.setCursor(drawPosition, lineNumber);
+
+  for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
+    lcd.write(lcdMeter[i]);
+
+}
+
+byte testValue = 0;
+char checkCount = 0;
+void idle_process()
+{
+  //space for user graphic display
+  if (menuOn == 0)
+  {
+    if ((displayOption1 & 0x10) == 0x10)    //always empty topline
+      return;
+      
+    //if line2DisplayStatus == 0 <-- this condition is clear Line, you can display any message
+    if (line2DisplayStatus == 0 || (((displayOption1 & 0x04) == 0x04) && line2DisplayStatus == 2)) {
+      if (checkCount++ > 1)
+      {
+        updateLine2Buffer(0); //call by scheduler
+        printLine2(line2Buffer);
+        line2DisplayStatus = 2;
+        checkCount = 0;
+      }
+
+      //EX for Meters
+      /*
+      DisplayMeter(0, testValue++, 7);
+      if (testValue > 30)
+        testValue = 0;
+      */
+    }
+  }
+}
+

ubitx_20/ubitx_keyer.ino

@@ -91,8 +91,6 @@ void cwKeyUp(){
 #define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
 enum KSTYPE {IDLE, CHK_DIT, CHK_DAH, KEYED_PREP, KEYED, INTER_ELEMENT };
 static long ktimer;
-bool Iambic_Key = true;
-unsigned char keyerControl = IAMBICB;
 unsigned char keyerState = IDLE;
 
 //Below is a test to reduce the keying error. do not delete lines
@@ -101,17 +99,17 @@ char update_PaddleLatch(byte isUpdateKeyState) {
   unsigned char tmpKeyerControl;
   int paddle = analogRead(ANALOG_KEYER);
 
-  if (paddle > cwAdcDashFrom && paddle < cwAdcDashTo)
+  if (paddle >= cwAdcDashFrom && paddle <= cwAdcDashTo)
     tmpKeyerControl |= DAH_L;
-  else if (paddle > cwAdcDotFrom && paddle < cwAdcDotTo)
+  else if (paddle >= cwAdcDotFrom && paddle <= cwAdcDotTo)
     tmpKeyerControl |= DIT_L;
-  else if (paddle > cwAdcBothFrom && paddle < cwAdcBothTo)
+  else if (paddle >= cwAdcBothFrom && paddle <= cwAdcBothTo)
     tmpKeyerControl |= (DAH_L | DIT_L) ;     
   else 
   {
     if (Iambic_Key)
       tmpKeyerControl = 0 ;
-    else if (paddle > cwAdcSTFrom && paddle < cwAdcSTTo)
+    else if (paddle >= cwAdcSTFrom && paddle <= cwAdcSTTo)
       tmpKeyerControl = DIT_L ;
      else
        tmpKeyerControl = 0 ; 

ubitx_20/ubitx_menu.ino

@@ -13,6 +13,36 @@
 #define printLineF1(x) (printLineF(1, x))
 #define printLineF2(x) (printLineF(0, x))
 
+void FrequencyToVFO(byte isSaveFreq)
+{
+  //Save Frequency & Mode Information
+  if (vfoActive == VFO_A)
+  {
+    vfoA = frequency;
+    vfoA_mode = modeToByte();
+
+    if (isSaveFreq)
+      storeFrequencyAndMode(1);
+  }
+  else
+  {
+    vfoB = frequency;
+    vfoB_mode = modeToByte();
+    
+    if (isSaveFreq)
+      storeFrequencyAndMode(2);
+  }
+}
+
+void menuClearExit(int delayTime)
+{
+  if (delayTime > 0)
+    delay_background(delayTime, 0);
+    
+  printLine2ClearAndUpdate();
+  menuOn = 0;
+}
+
 //Ham band move by KD8CEC
 void menuBand(int btn){
   int knob = 0;
@@ -27,8 +57,7 @@ void menuBand(int btn){
   printLineF2(F("Press to confirm"));
   //wait for the button menu select button to be lifted)
   while (btnDown()) {
-    delay(50);
-    Check_Cat(0);  //To prevent disconnections
+     delay_background(50, 0);
     if (btnPressCount++ > 20) {
       btnPressCount = 0;
       if (tuneTXType > 0) { //Just toggle 0 <-> 2, if tuneTXType is 100, 100 -> 0 -> 2
@@ -57,23 +86,13 @@ void menuBand(int btn){
     }
   }
   
-  delay(50);    
+  //delay(50);    
   ritDisable();
 
   while(!btnDown()){
 
     knob = enc_read();
     if (knob != 0){
-      /*
-      if (band > 3 && knob < 0)
-        band--;
-      if (band < 30 && knob > 0)
-        band++; 
-      if (band > 10)
-        isUSB = true;
-      else
-        isUSB = false;
-      setFrequency(((unsigned long)band * 1000000l) + offset); */
       if (tuneTXType == 2 || tuneTXType == 3 || tuneTXType == 102 || tuneTXType == 103) { //only ham band move
         if (knob < 0) {
           if (stepChangeCount-- < -3) {
@@ -87,7 +106,7 @@ void menuBand(int btn){
             stepChangeCount = 0;
           }
         }
-      }
+      }       //end of only ham band move
       else {  //original source
         if (knob < 0 && frequency > 3000000l)
           setFrequency(frequency - 200000l);
@@ -103,170 +122,297 @@ void menuBand(int btn){
       updateDisplay();
     }
     
-    delay(20);
-    Check_Cat(0);  //To prevent disconnections
+    delay_background(20, 0);
   }
 
+/*
   while(btnDown()) {
     delay(50);
     Check_Cat(0);  //To prevent disconnections
   }
-  
-  delay(50);
-  
-  printLine2ClearAndUpdate();
-  menuOn = 0;
+*/  
+  FrequencyToVFO(1);
+
+  //printLine2ClearAndUpdate();
+  //delay_background(500, 0);
+  //menuOn = 0;
+  menuClearExit(500);
 }
 
 //Convert Mode, Number by KD8CEC
-//0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
+//0: default, 1:not use, 2:LSB, 3:USB, 4:CWL, 5:CWU, 6:FM
 byte modeToByte(){
-  if (isUSB)
-    return 3;
+  if (cwMode == 0)
+  {
+    if (isUSB)
+      return 3;
+    else
+      return 2;
+  }
+  else if (cwMode == 1)
+  {
+    return 4;
+  }
   else
-    return 2;
+  {
+    return 5;
+  }
 }
 
 //Convert Number to Mode by KD8CEC
-void byteToMode(byte modeValue){
-  if (modeValue == 3)
-    isUSB = 1;
+//autoSetModebyFreq : 0
+//autoSetModebyFreq : 1, if (modValue is not set, set mode by frequency)
+void byteToMode(byte modeValue, byte autoSetModebyFreq){
+  if (modeValue == 4)
+    cwMode = 1;
+  else if (modeValue == 5)
+    cwMode = 2;
   else
-    isUSB = 0;
+  {
+    cwMode = 0;
+    if (modeValue == 3)
+      isUSB = 1;
+    else if (autoSetModebyFreq == 1 && (modeValue == 0))
+      isUSB = (frequency > 10000000l) ? true : false;
+    else
+      isUSB = 0;
+  }
 }
 
+/*
 //Convert Number to Mode by KD8CEC
 void byteWithFreqToMode(byte modeValue){
-  if (modeValue == 3)
-    isUSB = 1;
-  else if (modeValue == 0)  //Not Set
-    isUSB = (frequency > 10000000l) ? true : false;
-  else
-    isUSB = 0;
-}
-
-//VFO Toggle and save VFO Information, modified by KD8CEC
-void menuVfoToggle(int btn, char isUseDelayTime)
-{
-  if (!btn){
-    if (vfoActive == VFO_A)
-      printLineF2(F("Select VFO B?"));
+  if (modeValue == 4)
+    cwMode = 1;
+  else if (modeValue == 5)
+    cwMode = 2;
+  else  {
+    cwMode = 0;
+    if (modeValue == 3)
+      isUSB = 1;
+    else if (modeValue == 0)  //Not Set
+      isUSB = (frequency > 10000000l) ? true : false;
     else
-      printLineF2(F("Select VFO A?"));    
-  }
-  else {
-      if (vfoActive == VFO_B){
-        vfoB = frequency;
-        vfoB_mode = modeToByte();
-        storeFrequencyAndMode(2); //vfoB -> eeprom
-        
-        vfoActive = VFO_A;
-        frequency = vfoA;
-        saveCheckFreq = frequency;
-        byteToMode(vfoA_mode);
-        printLineF2(F("Selected VFO A"));
-      }
-      else {
-        vfoA = frequency;
-        vfoA_mode = modeToByte();
-        storeFrequencyAndMode(1); //vfoA -> eeprom
-        
-        vfoActive = VFO_B;
-        frequency = vfoB;
-        saveCheckFreq = frequency;
-        byteToMode(vfoB_mode);
-        printLineF2(F("Selected VFO B"));
-      }
-
-      ritDisable();
-
-      if (isUseDelayTime == 1)        //Found Issue in wsjt-x Linux 32bit 
-        delay_background(500, 0);
-        
-      printLine2ClearAndUpdate();
-      //exit the menu
-      menuOn = 0;
+      isUSB = 0;
   }
 }
+*/
 
-void menuRitToggle(int btn){
+void menuIFSSetup(int btn){
+  int knob = 0;
+  char needApplyChangeValue = 1;
+  
   if (!btn){
-    if (ritOn == 1)
-      printLineF2(F("RIT:On, Off?"));
+    if (isIFShift == 1)
+      printLineF2(F("IF Shift Change?"));
     else
-      printLineF2(F("RIT:Off, On?"));
+      printLineF2(F("IF Shift:Off, On?"));
   }
   else {
-      if (ritOn == 0){
-        printLineF2(F("RIT is ON"));
-        //enable RIT so the current frequency is used at transmit
-        ritEnable(frequency);
-      }
-      else{
-        printLineF2(F("RIT is OFF"));
-        ritDisable();
-      }
-      menuOn = 0;
+      //if (isIFShift == 0){
+        //printLineF2(F("IF Shift is ON"));
+        //delay_background(500, 0);
+      isIFShift = 1;
+      //}
+
       delay_background(500, 0);
-      printLine2ClearAndUpdate();
+      updateLine2Buffer(1);
+      setFrequency(frequency);
+
+      //Off or Change Value
+      while(!btnDown() ){
+        if (needApplyChangeValue ==1)
+        {
+          updateLine2Buffer(1);
+          setFrequency(frequency);
+        
+          if (cwMode == 0)
+            si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+          else
+            si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+
+          needApplyChangeValue = 0;
+        }
+        
+        knob = enc_read();
+        if (knob != 0){
+          if (knob < 0)
+            ifShiftValue -= 50l;
+          else if (knob > 0)
+            ifShiftValue += 50;
+
+          needApplyChangeValue = 1;
+        }
+      }
+
+      delay_background(500, 0); //for check Long Press function key
+      
+      if (btnDown() || ifShiftValue == 0)
+      {
+        isIFShift = 0;
+        printLineF2(F("IF Shift is OFF"));
+        setFrequency(frequency);
+        delay_background(500, 0);
+      }
+      
+      //menuOn = 0;
+      //printLine2ClearAndUpdate();
+      menuClearExit(0);
   }
 }
 
-void menuSidebandToggle(int btn){
+void menuSelectMode(int btn){
+  int knob = 0;
+  int selectModeType = 0;
+  int beforeMode = 0;
+  int moveStep = 0;
+  
   if (!btn){
-    if (isUSB == true)
-      printLineF2(F("Select LSB?"));
-    else
-      printLineF2(F("Select USB?"));
+      printLineF2(F("Select Mode?"));
   }
   else {
-      if (isUSB == true){
-        isUSB = false;
-        printLineF2(F("LSB Selected"));
-      }
-      else {
-        isUSB = true;
-        printLineF2(F("USB Selected"));
-      }
-    setFrequency(frequency);
     delay_background(500, 0);
-    printLine2ClearAndUpdate();
-    menuOn = 0;
+
+    //LSB, USB, CWL, CWU
+    if (cwMode == 0 && isUSB == 0)
+      selectModeType = 0;
+    else if (cwMode == 0 && isUSB == 1)
+      selectModeType = 1;
+    else if (cwMode == 1)
+      selectModeType = 2;
+    else
+      selectModeType = 3;
+
+    beforeMode = selectModeType;
+
+    while(!btnDown() && digitalRead(PTT) == HIGH){
+      //Display Mode Name
+      printLineF1(F("LSB USB CWL CWU"));
+      if (selectModeType == 0)
+        printLineF1(F("LSB"));
+      else if (selectModeType == 1)
+        printLineF1(F("USB"));
+      else if (selectModeType == 2)
+        printLineF1(F("CWL"));
+      else if (selectModeType == 3)
+        printLineF1(F("CWU"));
+
+      knob = enc_read();
+
+      if (knob != 0)
+      {
+        moveStep += (knob > 0 ? 1 : -1);
+        if (moveStep < -3) {
+          if (selectModeType > 0)
+            selectModeType--;
+            
+          moveStep = 0;
+        }
+        else if (moveStep > 3) {
+          if (selectModeType < 3)
+            selectModeType++;
+            
+          moveStep = 0;
+        }
+      }
+
+      Check_Cat(0);  //To prevent disconnections
+    }
+
+    if (beforeMode != selectModeType) {
+      //printLineF1(F("Changed Mode"));
+      if (selectModeType == 0) {
+        cwMode = 0; isUSB = 0;
+      }
+      else if (selectModeType == 1) {
+        cwMode = 0; isUSB = 1;
+      }
+      else if (selectModeType == 2) {
+        cwMode = 1;
+      }
+      else if (selectModeType == 3) {
+        cwMode = 2;
+      }
+
+      FrequencyToVFO(1);
+    }
+
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+  else
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+    
+    setFrequency(frequency);
+
+    //delay_background(500, 0);
+    //printLine2ClearAndUpdate();
+    //menuOn = 0;
+    menuClearExit(500);
   }
 }
 
 //Select CW Key Type by KD8CEC
 void menuSetupKeyType(int btn){
-  if (!btn && digitalRead(PTT) == HIGH){
-      if (Iambic_Key)
-        printLineF2(F("Key: Straight?"));
-      else
-        printLineF2(F("Key: Fn=A, PTT=B"));
+  int knob = 0;
+  int selectedKeyType = 0;
+  int moveStep = 0;
+  if (!btn){
+        printLineF2(F("Change Key Type?"));
   }
   else {
-      if (Iambic_Key)
-      {
-        printLineF2(F("Straight Key!"));
-        Iambic_Key = false;
-      }
-      else
-      {
-        Iambic_Key = true;
-        if (btn)
-        {
-          keyerControl &= ~IAMBICB;
-          printLineF2(F("IAMBICA Key!"));
-        }
-        else
-        {
-          keyerControl |= IAMBICB;
-          printLineF2(F("IAMBICB Key!"));
-        }
-      }
-      
+    printLineF2(F("Press to set Key"));
     delay_background(500, 0);
-    printLine2ClearAndUpdate();
-    menuOn = 0;
+    selectedKeyType = cwKeyType;
+    
+    while(!btnDown()){
+
+      //Display Key Type
+      if (selectedKeyType == 0)
+        printLineF1(F("Straight"));
+      else if (selectedKeyType == 1)
+        printLineF1(F("IAMBICA"));
+      else if (selectedKeyType == 2)
+        printLineF1(F("IAMBICB"));
+
+      knob = enc_read();
+
+      if (knob != 0)
+      {
+        moveStep += (knob > 0 ? 1 : -1);
+        if (moveStep < -3) {
+          if (selectedKeyType > 0)
+            selectedKeyType--;
+          moveStep = 0;
+        }
+        else if (moveStep > 3) {
+          if (selectedKeyType < 2)
+            selectedKeyType++;
+          moveStep = 0;
+        }
+      }
+
+      Check_Cat(0);  //To prevent disconnections
+    }
+    
+    printLineF2(F("CW Key Type set!"));
+    cwKeyType = selectedKeyType;
+    EEPROM.put(CW_KEY_TYPE, cwKeyType);
+
+    if (cwKeyType == 0)
+      Iambic_Key = false;
+    else
+    {
+      Iambic_Key = true;
+      if (cwKeyType == 1)
+        keyerControl &= ~IAMBICB;
+      else
+        keyerControl |= IAMBICB;
+    }
+
+    //delay_background(2000, 0);
+    //printLine2ClearAndUpdate();
+    //menuOn = 0;
+    menuClearExit(1000);
   }
 }
 
@@ -346,10 +492,109 @@ void menuADCMonitor(int btn){
     delay_background(200, 0);
   } //end of while
       
-  printLine2ClearAndUpdate();
-  menuOn = 0;
+  //printLine2ClearAndUpdate();
+  //menuOn = 0;
+  menuClearExit(0);
 }
 
+//VFO Toggle and save VFO Information, modified by KD8CEC
+void menuVfoToggle(int btn, char isUseDelayTime)
+{
+  if (!btn){
+    if (vfoActive == VFO_A)
+      printLineF2(F("Select VFO B?"));
+    else
+      printLineF2(F("Select VFO A?"));    
+  }
+  else {
+      FrequencyToVFO(1);
+    
+      if (vfoActive == VFO_B){
+        //vfoB = frequency;
+        //vfoB_mode = modeToByte();
+        //storeFrequencyAndMode(2); //vfoB -> eeprom
+        
+        vfoActive = VFO_A;
+        frequency = vfoA;
+        saveCheckFreq = frequency;
+        byteToMode(vfoA_mode, 0);
+        //printLineF2(F("Selected VFO A"));
+      }
+      else {
+        //vfoA = frequency;
+        //vfoA_mode = modeToByte();
+        //storeFrequencyAndMode(1); //vfoA -> eeprom
+        
+        vfoActive = VFO_B;
+        frequency = vfoB;
+        saveCheckFreq = frequency;
+        byteToMode(vfoB_mode, 0);
+        //printLineF2(F("Selected VFO B"));
+      }
+
+      ritDisable();
+      setFrequency(frequency);
+
+      //if (isUseDelayTime == 1)        //Found Issue in wsjt-x Linux 32bit 
+      //  delay_background(500, 0);
+
+      //printLine2ClearAndUpdate();
+      //menuOn = 0;
+      menuClearExit(0);
+  }
+}
+
+void menuRitToggle(int btn){
+  if (!btn){
+    if (ritOn == 1)
+      printLineF2(F("RIT:On, Off?"));
+    else
+      printLineF2(F("RIT:Off, On?"));
+  }
+  else {
+      if (ritOn == 0){
+        printLineF2(F("RIT is ON"));
+        //enable RIT so the current frequency is used at transmit
+        ritEnable(frequency);
+      }
+      else{
+        printLineF2(F("RIT is OFF"));
+        ritDisable();
+      }
+      //delay_background(500, 0);
+      //printLine2ClearAndUpdate();
+      //menuOn = 0;
+      menuClearExit(500);
+  }
+}
+
+void menuSplitOnOff(int btn){
+  if (!btn){
+    if (splitOn == 0)
+      printLineF2(F("Split On?"));
+    else
+      printLineF2(F("Split Off?"));
+  }
+  else {
+      if (splitOn == 1){
+        splitOn = 0;
+        printLineF2(F("Split Off!"));
+      }
+      else {
+        splitOn = 1;
+        if (ritOn == 1)
+          ritOn = 0;
+        printLineF2(F("Split On!"));
+      }
+      
+    //delay_background(500, 0);
+    //printLine2ClearAndUpdate();
+    //menuOn = 0;
+    menuClearExit(500);
+  }
+}
+
+
 //Function to disbled transmission
 //by KD8CEC
 void menuTxOnOff(int btn, byte optionType){
@@ -368,9 +613,11 @@ void menuTxOnOff(int btn, byte optionType){
         isTxType &= ~(optionType);
         printLineF2(F("TX ON!"));
       }
-    delay_background(500, 0);
-    printLine2ClearAndUpdate();
-    menuOn = 0;
+      
+    //delay_background(500, 0);
+    //printLine2ClearAndUpdate();
+    //menuOn = 0;
+    menuClearExit(500);
   }
 }
 
@@ -393,21 +640,19 @@ void menuSetup(int btn){
       modeCalibrate = false;
       printLineF2(F("Setup:Off"));
     }
-   delay_background(2000, 0);
-   printLine2Clear();
-   menuOn = 0;
+   //delay_background(2000, 0);
+   //printLine2Clear();
+   //menuOn = 0;
+   menuClearExit(1000);
   }
 }
 
 void menuExit(int btn){
-
   if (!btn){
       printLineF2(F("Exit Menu?"));
   }
-  else{
-      printLine2ClearAndUpdate();
-      menuOn = 0;
-  }
+  else
+   menuClearExit(0);
 }
 
 void menuCWSpeed(int btn){
@@ -425,7 +670,7 @@ void menuCWSpeed(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press to set WPm"));
     strcpy(b, "WPM:");
     itoa(wpm,c, 10);
     strcat(b, c);
@@ -455,14 +700,15 @@ void menuCWSpeed(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Speed set!"));
       cwSpeed = 1200/wpm;
       EEPROM.put(CW_SPEED, cwSpeed);
-      delay_background(2000, 0);
-    }
-    printLine2ClearAndUpdate();
-    menuOn = 0;
+    //}
+    //delay_background(2000, 0);
+    //printLine2ClearAndUpdate();
+    //menuOn = 0;
+   menuClearExit(1000);
 }
 
 //Builtin CW Keyer Logic by KD8CEC
@@ -500,7 +746,7 @@ void menuSetupCwDelay(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press, set Delay"));
     strcpy(b, "DELAY:");
     itoa(tmpCWDelay,c, 10);
     strcat(b, c);
@@ -528,14 +774,15 @@ void menuSetupCwDelay(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Delay set!"));
       cwDelayTime = tmpCWDelay / 10;
       EEPROM.put(CW_DELAY, cwDelayTime);
-      delay_background(2000, 0);
-    }
-    printLine2ClearAndUpdate();
-    menuOn = 0;
+      //delay_background(2000, 0);
+    //}
+    //printLine2ClearAndUpdate();
+    //menuOn = 0;
+   menuClearExit(1000);
 }
 
 //CW Time delay by KD8CEC
@@ -549,7 +796,7 @@ void menuSetupTXCWInterval(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press, set Delay"));
     strcpy(b, "Start Delay:");
     itoa(tmpTXCWInterval,c, 10);
     strcat(b, c);
@@ -577,14 +824,15 @@ void menuSetupTXCWInterval(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Start set!"));
       delayBeforeCWStartTime = tmpTXCWInterval / 2;
       EEPROM.put(CW_START, delayBeforeCWStartTime);
-      delay_background(2000, 0);
-    }
-    printLine2ClearAndUpdate();
-    menuOn = 0;
+      //delay_background(2000, 0);
+    //}
+    //printLine2ClearAndUpdate();
+    //menuOn = 0;
+   menuClearExit(1000);
 }
 
 
@@ -617,6 +865,7 @@ void factoryCalibration(int btn){
 
   calibration = 0;
 
+  cwMode = 0;
   isUSB = true;
 
   //turn off the second local oscillator and the bfo
@@ -666,7 +915,8 @@ void factoryCalibration(int btn){
 
   while(btnDown())
     delay(50);
-  delay(100);
+
+  menuClearExit(100);
 }
 
 void menuSetupCalibration(int btn){
@@ -730,11 +980,11 @@ void menuSetupCalibration(int btn){
   initOscillators();
   //si5351_set_calibration(calibration);
   setFrequency(frequency);    
-  printLine2ClearAndUpdate();
-  menuOn = 0;
+  //printLine2ClearAndUpdate();
+  //menuOn = 0;
+  menuClearExit(0);
 }
 
-
 void printCarrierFreq(unsigned long freq){
 
   memset(c, 0, sizeof(c));
@@ -746,7 +996,7 @@ void printCarrierFreq(unsigned long freq){
   strcat(c, ".");
   strncat(c, &b[2], 3);
   strcat(c, ".");
-  strncat(c, &b[5], 1);
+  strncat(c, &b[5], 3);
   printLine2(c);    
 }
 
@@ -798,10 +1048,73 @@ void menuSetupCarrier(int btn){
   else 
     usbCarrier = prevCarrier;
 
-  si5351bx_setfreq(0, usbCarrier);          
+  //si5351bx_setfreq(0, usbCarrier);          
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+  else
+    si5351bx_setfreq(0, cwmCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+  
   setFrequency(frequency);    
-  printLine2ClearAndUpdate();
-  menuOn = 0; 
+  //printLine2ClearAndUpdate();
+  //menuOn = 0; 
+  menuClearExit(0);
+}
+
+//Append by KD8CEC
+void menuSetupCWCarrier(int btn){
+  int knob = 0;
+  unsigned long prevCarrier;
+   
+  if (!btn){
+      printLineF2(F("Set CW RX BFO"));
+    return;
+  }
+
+  prevCarrier = cwmCarrier;
+  printLineF1(F("PTT to confirm. "));
+  delay_background(1000, 0);
+
+  si5351bx_setfreq(0, cwmCarrier);
+  printCarrierFreq(cwmCarrier);
+
+  //disable all clock 1 and clock 2 
+  while (digitalRead(PTT) == HIGH && !btnDown())
+  {
+    knob = enc_read();
+
+    if (knob > 0)
+      cwmCarrier -= 5;
+    else if (knob < 0)
+      cwmCarrier += 5;
+    else
+      continue; //don't update the frequency or the display
+      
+    si5351bx_setfreq(0, cwmCarrier);
+    printCarrierFreq(cwmCarrier);
+
+    //Check_Cat(0);  //To prevent disconnections
+    //delay(100);
+    delay_background(100, 0);
+  }
+
+  //save the setting
+  if (digitalRead(PTT) == LOW){
+    printLineF2(F("Carrier set!"));
+    EEPROM.put(CW_CAL, cwmCarrier);
+    delay_background(1000, 0);
+  }
+  else 
+    cwmCarrier = prevCarrier;
+
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+  else
+    si5351bx_setfreq(0, cwmCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+  
+  setFrequency(frequency);
+  //printLine2ClearAndUpdate();
+  //menuOn = 0; 
+  menuClearExit(0);
 }
 
 //Modified by KD8CEC
@@ -836,21 +1149,23 @@ void menuSetupCwTone(int btn){
       itoa(sideTone, b, 10);
       printLine2(b);
 
-      delay(100);
-      Check_Cat(0);  //To prevent disconnections
+      //delay(100);
+      //Check_Cat(0);  //To prevent disconnections
+      delay_background(100, 0);
     }
     noTone(CW_TONE);
     //save the setting
     if (digitalRead(PTT) == LOW){
       printLineF2(F("Sidetone set!"));
-      EEPROM.put(CW_SIDETONE, usbCarrier);
+      EEPROM.put(CW_SIDETONE, sideTone);
       delay_background(2000, 0);
     }
     else
       sideTone = prev_sideTone;
     
-    printLine2ClearAndUpdate();
-    menuOn = 0; 
+    //printLine2ClearAndUpdate();
+    //menuOn = 0; 
+  menuClearExit(0);
  }
 
 //Lock Dial move by KD8CEC
@@ -888,8 +1203,9 @@ void doMenu(){
 
   //Appened Lines by KD8CEC for Adjust Tune step and Set Dial lock
   while(btnDown()){
-    delay(50);
-    Check_Cat(0);  //To prevent disconnections
+    //delay(50);
+    //Check_Cat(0);  //To prevent disconnections
+    delay_background(50, 0);
     
     if (btnDownTimeCount++ == (PRESS_ADJUST_TUNE / 50)) { //Set Tune Step 
       printLineF2(F("Set Tune Step?"));
@@ -907,13 +1223,14 @@ void doMenu(){
   //ADJUST TUNE STEP 
   if (btnDownTimeCount > (PRESS_ADJUST_TUNE / 50))
   {
-    printLineF1(F("Press Key to set"));
+    printLineF1(F("Press to set step"));
     isNeedDisplay = 1; //check to need display for display current value
     
     while (digitalRead(PTT) == HIGH && !btnDown())
     {
-      Check_Cat(0);  //To prevent disconnections
-      delay(50);  //debounce    
+      //Check_Cat(0);  //To prevent disconnections
+      //delay(50);  //debounce    
+      delay_background(50, 0);
 
       if (isNeedDisplay) {
         strcpy(b, "Tune Step:");
@@ -960,9 +1277,9 @@ void doMenu(){
     btnState = btnDown();
 
     if (i > 0){
-      if (modeCalibrate && select + i < 170)
+      if (modeCalibrate && select + i < 200)
         select += i;
-      if (!modeCalibrate && select + i < 80)
+      if (!modeCalibrate && select + i < 100)
         select += i;
     }
     //if (i < 0 && select - i >= 0)
@@ -974,36 +1291,42 @@ void doMenu(){
     else if (select < 10)
       menuBand(btnState);
     else if (select < 20)
-      menuRitToggle(btnState);
-    else if (select < 30)
       menuVfoToggle(btnState, 1);
+    else if (select < 30)
+      menuSelectMode(btnState);
     else if (select < 40)
-      menuSidebandToggle(btnState);
+      menuRitToggle(btnState);
     else if (select < 50)
-      menuCWSpeed(btnState);
+      menuIFSSetup(btnState);
     else if (select < 60)
-      menuCWAutoKey(btnState);
+      menuCWSpeed(btnState);
     else if (select < 70)
+      menuSplitOnOff(btnState);      //SplitOn / off
+    else if (select < 80)
+      menuCWAutoKey(btnState);
+    else if (select < 90)
       menuSetup(btnState);
-    else if (select < 80 && !modeCalibrate)
+    else if (select < 100)
       menuExit(btnState);
-    else if (select < 90 && modeCalibrate)
-      menuSetupCalibration(btnState);   //crystal
-    else if (select < 100 && modeCalibrate)
-      menuSetupCarrier(btnState);       //lsb
     else if (select < 110 && modeCalibrate)
-      menuSetupCwTone(btnState);
+      menuSetupCalibration(btnState);   //crystal
     else if (select < 120 && modeCalibrate)
-      menuSetupCwDelay(btnState);
+      menuSetupCarrier(btnState);       //lsb
     else if (select < 130 && modeCalibrate)
-      menuSetupTXCWInterval(btnState);
+      menuSetupCWCarrier(btnState);       //lsb
     else if (select < 140 && modeCalibrate)
-      menuSetupKeyType(btnState);
+      menuSetupCwTone(btnState);
     else if (select < 150 && modeCalibrate)
-      menuADCMonitor(btnState);
+      menuSetupCwDelay(btnState);
     else if (select < 160 && modeCalibrate)
-      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
+      menuSetupTXCWInterval(btnState);
     else if (select < 170 && modeCalibrate)
+      menuSetupKeyType(btnState);
+    else if (select < 180 && modeCalibrate)
+      menuADCMonitor(btnState);
+    else if (select < 190 && modeCalibrate)
+      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
+    else if (select < 200 && modeCalibrate)
       menuExit(btnState);
 
     Check_Cat(0);  //To prevent disconnections
@@ -1011,9 +1334,8 @@ void doMenu(){
 
   //debounce the button
   while(btnDown()){
-    delay(50);
-    Check_Cat(0);  //To prevent disconnections
+    delay_background(50, 0);  //To prevent disconnections
   }
-  delay(50);
+  //delay(50);
 }
 

ubitx_20/ubitx_si5351.ino

@@ -109,7 +109,11 @@ void initOscillators(){
   //initialize the SI5351
   si5351bx_init();
   si5351bx_vcoa = (SI5351BX_XTAL * SI5351BX_MSA) + calibration; // apply the calibration correction factor
-  si5351bx_setfreq(0, usbCarrier);
+
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));
+ else
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));
 }
 
 

ubitx_20/ubitx_ui.ino

@@ -25,8 +25,8 @@ int btnDown(){
  * The current reading of the meter is assembled in the string called meter
  */
 
-//char meter[17];
 
+/*
 const PROGMEM uint8_t s_meter_bitmap[] = {
   B00000,B00000,B00000,B00000,B00000,B00100,B00100,B11011,
   B10000,B10000,B10000,B10000,B10100,B10100,B10100,B11011,
@@ -35,7 +35,18 @@ const PROGMEM uint8_t s_meter_bitmap[] = {
   B00010,B00010,B00010,B00010,B00110,B00110,B00110,B11011,
   B00001,B00001,B00001,B00001,B00101,B00101,B00101,B11011
 };
-PGM_P ps_meter_bitmap = reinterpret_cast<PGM_P>(s_meter_bitmap);
+*/
+
+const PROGMEM uint8_t meters_bitmap[] = {
+  B10000,  B10000,  B10000,  B10000,  B10000,  B10000,  B10000,  B10000 ,   //custom 1
+  B11000,  B11000,  B11000,  B11000,  B11000,  B11000,  B11000,  B11000 ,   //custom 2
+  B11100,  B11100,  B11100,  B11100,  B11100,  B11100,  B11100,  B11100 ,   //custom 3
+  B11110,  B11110,  B11110,  B11110,  B11110,  B11110,  B11110,  B11110 ,   //custom 4
+  B11111,  B11111,  B11111,  B11111,  B11111,  B11111,  B11111,  B11111 ,   //custom 5
+  B01000,  B11100,  B01000,  B00000,  B10111,  B10101,  B10101,  B10111     //custom 6
+};
+
+PGM_P p_metes_bitmap = reinterpret_cast<PGM_P>(meters_bitmap);
 
 const PROGMEM uint8_t lock_bitmap[8] = {
   0b01110,
@@ -60,38 +71,56 @@ void initMeter(){
   lcd.createChar(0, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i);
   lcd.createChar(1, tmpbytes);
 
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 8);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 8);
   lcd.createChar(2, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 16);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 16);
   lcd.createChar(3, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 24);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 24);
   lcd.createChar(4, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 28);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 32);
   lcd.createChar(5, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 32);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 40);
   lcd.createChar(6, tmpbytes);
 }
 
-/**
- * The meter is drawn with special characters.
- * character 1 is used to simple draw the blocks of the scale of the meter
- * characters 2 to 6 are used to draw the needle in positions 1 to within the block
- * This displays a meter from 0 to 100, -1 displays nothing
- */
+//by KD8CEC
+//0 ~ 25 : 30 over : + 10
+void drawMeter(int needle) {
+  //5Char + O over
+  int drawCharLength = needle / 5;
+  int drawCharLengthLast = needle % 5;
+  int i;
 
- /*
+  for (i = 0; i < 5; i++) {
+    if (needle >= 5)
+      lcdMeter[i] = 5; //full
+    else if (needle > 0)
+      lcdMeter[i] = needle; //full
+    else  //0
+      lcdMeter[i] = 0x20;
+    
+    needle -= 5;
+  }
+
+  if (needle > 0)
+    lcdMeter[5] = 6;
+  else
+    lcdMeter[5] = 0x20;
+}
+
+/*
 void drawMeter(int8_t needle){
   int16_t best, i, s;
 
@@ -101,21 +130,23 @@ void drawMeter(int8_t needle){
   s = (needle * 4)/10;
   for (i = 0; i < 8; i++){
     if (s >= 5)
-      meter[i] = 1;
+      lcdMeter[i] = 1;
     else if (s >= 0)
-      meter[i] = 2 + s;
+      lcdMeter[i] = 2 + s;
     else
-      meter[i] = 1;
+      lcdMeter[i] = 1;
     s = s - 5;
   }
   if (needle >= 40)
-    meter[i-1] = 6;
-  meter[i] = 0;
+    lcdMeter[i-1] = 6;
+  lcdMeter[i] = 0;
 }
 */
-
 // The generic routine to display one line on the LCD 
 void printLine(unsigned char linenmbr, const char *c) {
+  if ((displayOption1 & 0x01) == 0x01)
+    linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
+    
   if (strcmp(c, printBuff[linenmbr])) {     // only refresh the display when there was a change
     lcd.setCursor(0, linenmbr);             // place the cursor at the beginning of the selected line
     lcd.print(c);
@@ -145,6 +176,9 @@ void printLineF(char linenmbr, const __FlashStringHelper *c)
 
 #define LCD_MAX_COLUMN 16
 void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex) {
+  if ((displayOption1 & 0x01) == 0x01)
+    linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
+  
   lcd.setCursor(lcdColumn, linenmbr);
 
   for (byte i = eepromStartIndex; i <= eepromEndIndex; i++)
@@ -168,6 +202,12 @@ void printLine2(const char *c){
   printLine(0,c);
 }
 
+void clearLine2()
+{
+  printLine2("");
+  line2DisplayStatus = 0;
+}
+
 //  short cut to print to the first line
 void printLine1Clear(){
   printLine(1,"");
@@ -179,6 +219,7 @@ void printLine2Clear(){
 
 void printLine2ClearAndUpdate(){
   printLine(0, "");
+  line2DisplayStatus = 0;  
   updateDisplay();
 }
 
@@ -194,7 +235,6 @@ char byteToChar(byte srcByte){
 void updateDisplay() {
   // tks Jack Purdum W8TEE
   // replaced fsprint commmands by str commands for code size reduction
-  
   // replace code for Frequency numbering error (alignment, point...) by KD8CEC
   int i;
   unsigned long tmpFreq = frequency; //
@@ -221,10 +261,21 @@ void updateDisplay() {
     if (ritOn)
       strcpy(c, "RIT ");
     else {
-      if (isUSB)
-        strcpy(c, "USB ");
+      if (cwMode == 0)
+      {
+        if (isUSB)
+          strcpy(c, "USB ");
+        else
+          strcpy(c, "LSB ");
+      }
+      else if (cwMode == 1)
+      {
+          strcpy(c, "CWL ");
+      }
       else
-        strcpy(c, "LSB ");
+      {
+          strcpy(c, "CWU ");
+      }
     }
     if (vfoActive == VFO_A) // VFO A is active
       strcat(c, "A:");
@@ -251,18 +302,22 @@ void updateDisplay() {
   //  strcat(c, " TX");
   printLine(1, c);
 
+  byte diplayVFOLine = 1;
+  if ((displayOption1 & 0x01) == 0x01)
+    diplayVFOLine = 0;
+
   if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
     (vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write((uint8_t)0);
   }
   else if (isCWAutoMode == 2){
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write(0x7E);
   }
   else
   {
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write(":");
   }