Merge pull request #17 from phdlee/version0.33

Version0.33

ubitx_20/cat_libs.ino

@@ -130,10 +130,21 @@ void CatGetFreqMode(unsigned long freq, byte fromType)
   }
 
   //Mode Check
-  if (isUSB)
-    CAT_BUFF[4] = CAT_MODE_USB;
+  if (cwMode == 0)
+  {
+    if (isUSB)
+      CAT_BUFF[4] = CAT_MODE_USB;
+    else
+      CAT_BUFF[4] = CAT_MODE_LSB;
+  }
+  else if (cwMode == 1)
+  {
+      CAT_BUFF[4] = CAT_MODE_CW;
+  }
   else
-    CAT_BUFF[4] = CAT_MODE_LSB;
+  {
+      CAT_BUFF[4] = CAT_MODE_CW;
+  }
 
   SendCatData(5);
 }
@@ -198,12 +209,18 @@ void CatSetMode(byte tmpMode, byte fromType)
   
   if (!inTx)
   {
-    if (tmpMode == CAT_MODE_USB)
+    if (tmpMode == CAT_MODE_CW)
     {
+      cwMode = 1;
+    }
+    else if (tmpMode == CAT_MODE_USB)
+    {
+      cwMode = 0;
       isUSB = true;
     }
     else
     {
+      cwMode = 0;
       isUSB = false;
     }
 
@@ -358,10 +375,21 @@ void ReadEEPRom_FT817(byte fromType)
       CAT_BUFF[1] = 0xB2;
       break;      case 0x69 : //FM Mic (#29)  Contains 0-100 (decimal) as displayed
     case 0x78 :
-      if (isUSB)
-        CAT_BUFF[0] = CAT_MODE_USB;
-      else
-        CAT_BUFF[0] = CAT_MODE_LSB;
+      if (cwMode == 0)
+      {
+        if (isUSB)
+          CAT_BUFF[0] = CAT_MODE_USB;
+        else
+          CAT_BUFF[0] = CAT_MODE_LSB;
+      }
+      else if (cwMode == 1)
+      {
+          CAT_BUFF[0] = CAT_MODE_CW;
+      }
+      else if (cwMode == 2)
+      {
+          CAT_BUFF[0] = CAT_MODE_CW;
+      }
         
       if (CAT_BUFF[0] != 0) CAT_BUFF[0] = 1 << 5;
       break;
@@ -384,7 +412,7 @@ void ReadEEPRom_FT817(byte fromType)
       //7A  6 ? ?
       //7A  7 SPL On/Off  0 = Off, 1 = On
 
-      CAT_BUFF[0] = (isSplitOn ? 0xFF : 0x7F);
+      CAT_BUFF[0] = (splitOn ? 0xFF : 0x7F);
       break;
     case 0xB3 : //
       CAT_BUFF[0] = 0x00;
@@ -472,7 +500,7 @@ void WriteEEPRom_FT817(byte fromType)
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
         delay(300);                       //If timeout errors occur in the calling software, remove them
-        printLine2("");                   //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
+        clearLine2();
       }
       break;
 
@@ -484,7 +512,8 @@ void WriteEEPRom_FT817(byte fromType)
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
         delay(300);                   //If timeout errors occur in the calling software, remove them
-        printLine2("");               //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
+        clearLine2();
+        line2DisplayStatus = 0;
       }
       break;
 
@@ -504,7 +533,7 @@ void WriteEEPRom_FT817(byte fromType)
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_DELAY, cwDelayTime);
       delay(300);
-      printLine2("");
+      clearLine2();
       break;
     case 0x62 : //
       //5-0  CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
@@ -513,7 +542,7 @@ void WriteEEPRom_FT817(byte fromType)
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_SPEED, cwSpeed);
       delay(300);
-      printLine2("");
+      clearLine2();
 
       break;
       /*

ubitx_20/cw_autokey.ino

@@ -298,8 +298,12 @@ void controlAutoCW(){
           }
           
           printLineFromEEPRom(0, 2, cwStartIndex + displayScrolStep + CW_DATA_OFSTADJ, cwEndIndex + CW_DATA_OFSTADJ); 
+
+          byte diplayAutoCWLine = 0;
+          if ((displayOption1 & 0x01) == 0x01)
+            diplayAutoCWLine = 1;
           
-          lcd.setCursor(0,0);
+          lcd.setCursor(0, diplayAutoCWLine);
           lcd.write(byteToChar(selectedCWTextIndex));
           lcd.write(':');
           isNeedScroll = (cwEndIndex - cwStartIndex) > 14 ? 1 : 0;

ubitx_20/ubitx_20.ino

@@ -84,6 +84,7 @@
 #define PTT   (A3)
 #define ANALOG_KEYER (A6)
 #define ANALOG_SPARE (A7)
+#define ANALOG_SMETER (A7)  //by KD8CEC
 
 /** 
  * The Raduino board is the size of a standard 16x2 LCD panel. It has three connectors:
@@ -150,6 +151,7 @@ int count = 0;          //to generally count ticks, loops, etc
 #define CW_SPEED 28
 
 //AT328 has 1KBytes EEPROM
+#define CW_CAL 252
 #define VFO_A_MODE 256
 #define VFO_B_MODE 257
 #define CW_DELAY 258
@@ -172,6 +174,10 @@ int count = 0;          //to generally count ticks, loops, etc
 #define CW_ADC_DASH_TO   355   //CW ADC Range DASH to           (Lower 8 bit)
 #define CW_ADC_BOTH_FROM 356   //CW ADC Range BOTH from         (Lower 8 bit)
 #define CW_ADC_BOTH_TO   357   //CW ADC Range BOTH to           (Lower 8 bit)
+#define CW_KEY_TYPE      358
+
+#define DISPLAY_OPTION1  361   //Display Option1
+#define DISPLAY_OPTION2  362   //Display Option2
 
 //Check Firmware type and version
 #define FIRMWAR_ID_ADDR 776 //776 : 0x59, 777 :0x58, 778 : 0x68 : Id Number, if not found id, erase eeprom(32~1023) for prevent system error.
@@ -227,7 +233,7 @@ int count = 0;          //to generally count ticks, loops, etc
 char ritOn = 0;
 char vfoActive = VFO_A;
 int8_t meter_reading = 0; // a -1 on meter makes it invisible
-unsigned long vfoA=7150000L, vfoB=14200000L, sideTone=800, usbCarrier;
+unsigned long vfoA=7150000L, vfoB=14200000L, sideTone=800, usbCarrier, cwmCarrier;
 unsigned long vfoA_eeprom, vfoB_eeprom; //for protect eeprom life
 unsigned long frequency, ritRxFrequency, ritTxFrequency;  //frequency is the current frequency on the dial
 
@@ -244,7 +250,6 @@ byte saveIntervalSec = 10;  //second
 unsigned long saveCheckTime = 0;
 unsigned long saveCheckFreq = 0;
 
-bool isSplitOn = false;
 byte cwDelayTime = 60;
 byte delayBeforeCWStartTime = 50;
 
@@ -258,6 +263,9 @@ byte isTxType = 0;    //000000[0 - isSplit] [0 - isTXStop]
 byte arTuneStep[5];
 byte tuneStepIndex; //default Value 0, start Offset is 0 because of check new user
 
+byte displayOption1 = 0;
+byte displayOption2 = 0;
+
 //CW ADC Range
 int cwAdcSTFrom = 0;
 int cwAdcSTTo = 0;
@@ -267,6 +275,10 @@ int cwAdcDashFrom = 0;
 int cwAdcDashTo = 0;
 int cwAdcBothFrom = 0;
 int cwAdcBothTo = 0;
+byte cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
+bool Iambic_Key = true;
+#define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
+unsigned char keyerControl = IAMBICB;
 
 //Variables for auto cw mode
 byte isCWAutoMode = 0;          //0 : none, 1 : CW_AutoMode_Menu_Selection, 2 : CW_AutoMode Sending
@@ -286,9 +298,13 @@ byte userCallsignLength = 0;    //7 : display callsign at system startup, 6~0 :
  */
 boolean txCAT = false;        //turned on if the transmitting due to a CAT command
 char inTx = 0;                //it is set to 1 if in transmit mode (whatever the reason : cw, ptt or cat)
-char splitOn = 0;             //working split, uses VFO B as the transmit frequency, (NOT IMPLEMENTED YET)
+char splitOn = 0;             //working split, uses VFO B as the transmit frequency
 char keyDown = 0;             //in cw mode, denotes the carrier is being transmitted
 char isUSB = 0;               //upper sideband was selected, this is reset to the default for the 
+
+char cwMode = 0;              //compatible original source, and extend mode //if cwMode == 0, mode check : isUSB, cwMode > 0, mode Check : cwMode
+                              //iscwMode = 0 : ssbmode, 1 :cwl, 2 : cwu, 3 : cwn (none tx)
+                              
                               //frequency when it crosses the frequency border of 10 MHz
 byte menuOn = 0;              //set to 1 when the menu is being displayed, if a menu item sets it to zero, the menu is exited
 unsigned long cwTimeout = 0;  //milliseconds to go before the cw transmit line is released and the radio goes back to rx mode
@@ -296,6 +312,14 @@ unsigned long dbgCount = 0;   //not used now
 unsigned char txFilter = 0;   //which of the four transmit filters are in use
 boolean modeCalibrate = false;//this mode of menus shows extended menus to calibrate the oscillators and choose the proper
                               //beat frequency
+
+unsigned long beforeIdle_ProcessTime = 0; //for check Idle time
+byte line2DisplayStatus = 0;  //0:Clear, 1 : menu, 1: DisplayFrom Idle, 
+char lcdMeter[17];
+
+byte isIFShift = 0;     //1 = ifShift, 2 extend
+long ifShiftValue = 0;  //
+                              
 /**
  * Below are the basic functions that control the uBitx. Understanding the functions before 
  * you start hacking around
@@ -348,8 +372,10 @@ void setNextHamBandFreq(unsigned long f, char moveDirection)
 
   EEPROM.get(HAM_BAND_FREQS + 4 * findedIndex, resultFreq);
   
-  loadMode = (byte)(resultFreq >> 30);
-  resultFreq = resultFreq & 0x3FFFFFFF;
+  //loadMode = (byte)(resultFreq >> 30);
+  //resultFreq = resultFreq & 0x3FFFFFFF;
+  loadMode = (byte)(resultFreq >> 29);
+  resultFreq = resultFreq & 0x1FFFFFFF;
   
   if ((resultFreq / 1000) < hamBandRange[(unsigned char)findedIndex][0] || (resultFreq / 1000) > hamBandRange[(unsigned char)findedIndex][1])
     resultFreq = (unsigned long)(hamBandRange[(unsigned char)findedIndex][0]) * 1000;
@@ -360,10 +386,10 @@ void setNextHamBandFreq(unsigned long f, char moveDirection)
 
 void saveBandFreqByIndex(unsigned long f, unsigned long mode, char bandIndex) {
   if (bandIndex >= 0)
-    EEPROM.put(HAM_BAND_FREQS + 4 * bandIndex, (f & 0x3FFFFFFF) | (mode << 30) );
+    //EEPROM.put(HAM_BAND_FREQS + 4 * bandIndex, (f & 0x3FFFFFFF) | (mode << 30) );
+    EEPROM.put(HAM_BAND_FREQS + 4 * bandIndex, (f & 0x1FFFFFFF) | (mode << 29) );
 }
 
-
 /*
   KD8CEC
   When using the basic delay of the Arduino, the program freezes.
@@ -457,13 +483,27 @@ void setFrequency(unsigned long f){
   
   setTXFilters(f);
 
-  if (isUSB){
-    si5351bx_setfreq(2, SECOND_OSC_USB - usbCarrier + f);
-    si5351bx_setfreq(1, SECOND_OSC_USB);
+  if (cwMode == 0)
+  {
+    if (isUSB){
+      si5351bx_setfreq(2, SECOND_OSC_USB - usbCarrier + f  + (isIFShift ? ifShiftValue : 0));
+      si5351bx_setfreq(1, SECOND_OSC_USB);
+    }
+    else{
+      si5351bx_setfreq(2, SECOND_OSC_LSB + usbCarrier + f + (isIFShift ? ifShiftValue : 0));
+      si5351bx_setfreq(1, SECOND_OSC_LSB);
+    }
   }
-  else{
-    si5351bx_setfreq(2, SECOND_OSC_LSB + usbCarrier + f);
-    si5351bx_setfreq(1, SECOND_OSC_LSB);
+  else
+  {
+    if (cwMode == 1){ //CWL
+      si5351bx_setfreq(2, SECOND_OSC_LSB + cwmCarrier + f + (isIFShift ? ifShiftValue : 0));
+      si5351bx_setfreq(1, SECOND_OSC_LSB);
+    }
+    else{             //CWU
+      si5351bx_setfreq(2, SECOND_OSC_USB - cwmCarrier + f + (isIFShift ? ifShiftValue : 0));
+      si5351bx_setfreq(1, SECOND_OSC_USB);
+    }
   }
   
   frequency = f;
@@ -492,6 +532,21 @@ void startTx(byte txMode, byte isDisplayUpdate){
     ritRxFrequency = frequency;
     setFrequency(ritTxFrequency);
   }
+  else if (splitOn == 1) {
+      if (vfoActive == VFO_B) {
+        vfoActive = VFO_A;
+        frequency = vfoA;
+        byteToMode(vfoA_mode);
+      }
+      else if (vfoActive == VFO_A){
+        vfoActive = VFO_B;
+        frequency = vfoB;
+        byteToMode(vfoB_mode);
+      }
+
+      setFrequency(frequency);
+  } //end of else
+  
 
   if (txMode == TX_CW){
     //turn off the second local oscillator and the bfo
@@ -501,10 +556,22 @@ void startTx(byte txMode, byte isDisplayUpdate){
     //shif the first oscillator to the tx frequency directly
     //the key up and key down will toggle the carrier unbalancing
     //the exact cw frequency is the tuned frequency + sidetone
-    if (isUSB)
-      si5351bx_setfreq(2, frequency + sideTone);
-    else
-      si5351bx_setfreq(2, frequency - sideTone); 
+
+    if (cwMode == 0)
+    {
+      if (isUSB)
+        si5351bx_setfreq(2, frequency + sideTone);
+      else
+        si5351bx_setfreq(2, frequency - sideTone); 
+    }
+    else if (cwMode == 1) //CWL
+    {
+        si5351bx_setfreq(2, frequency - sideTone); 
+    }
+    else  //CWU
+    {
+        si5351bx_setfreq(2, frequency + sideTone);
+    }
   }
 
   //reduce latency time when begin of CW mode
@@ -516,10 +583,28 @@ void stopTx(){
   inTx = 0;
 
   digitalWrite(TX_RX, 0);           //turn off the tx
-  si5351bx_setfreq(0, usbCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+  else
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
 
   if (ritOn)
     setFrequency(ritRxFrequency);
+  else if (splitOn == 1) {
+      //vfo Change
+      if (vfoActive == VFO_B){
+        vfoActive = VFO_A;
+        frequency = vfoA;
+        byteToMode(vfoA_mode);
+      }
+      else if (vfoActive == VFO_A){
+        vfoActive = VFO_B;
+        frequency = vfoB;
+        byteToMode(vfoB_mode);
+      }
+      setFrequency(frequency);
+  } //end of else
   else
     setFrequency(frequency);
   
@@ -670,6 +755,24 @@ void doRIT(){
   }
 }
 
+/*
+void doIFShift(){
+  int knob = enc_read();
+  unsigned long old_freq = frequency;
+
+  if (knob != 0)
+  {
+    if (knob < 0)
+      ifShiftValue -= 1l;
+    else if (knob > 0)
+      ifShiftValue += 1;
+
+    updateLine2Buffer(1);
+    setFrequency(frequency);
+  }
+}
+*/
+
 /**
  save Frequency and mode to eeprom
  */
@@ -745,6 +848,7 @@ void initSettings(){
   if (EEPROM.read(VERSION_ADDRESS) != VERSION_NUM)
     EEPROM.write(VERSION_ADDRESS, VERSION_NUM);
 
+  EEPROM.get(CW_CAL, cwmCarrier);
 
   //for Save VFO_A_MODE to eeprom
   //0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
@@ -756,6 +860,24 @@ void initSettings(){
 
   //CW interval between TX and CW Start
   EEPROM.get(CW_START, delayBeforeCWStartTime);
+  EEPROM.get(CW_KEY_TYPE, cwKeyType);
+  if (cwKeyType > 2)
+    cwKeyType = 0;
+
+  if (cwKeyType == 0)
+    Iambic_Key = false;
+  else
+  {
+    Iambic_Key = true;
+    if (cwKeyType == 1)
+      keyerControl &= ~IAMBICB;
+    else
+      keyerControl |= IAMBICB;
+  }
+    
+
+  EEPROM.get(DISPLAY_OPTION1, displayOption1);
+  EEPROM.get(DISPLAY_OPTION2, displayOption2);
 
   //User callsign information
   if (EEPROM.read(USER_CALLSIGN_KEY) == 0x59)
@@ -790,7 +912,7 @@ void initSettings(){
     hamBandRange[0][0] = 1810; hamBandRange[0][1] = 2000; 
     hamBandRange[1][0] = 3500; hamBandRange[1][1] = 3800; 
     hamBandRange[2][0] = 5351; hamBandRange[2][1] = 5367; 
-    hamBandRange[3][0] = 7000; hamBandRange[3][1] = 7200; 
+    hamBandRange[3][0] = 7000; hamBandRange[3][1] = 7300;   //region 1
     hamBandRange[4][0] = 10100; hamBandRange[4][1] = 10150; 
     hamBandRange[5][0] = 14000; hamBandRange[5][1] = 14350; 
     hamBandRange[6][0] = 18068; hamBandRange[6][1] = 18168; 
@@ -875,6 +997,9 @@ void initSettings(){
   //original code with modified by kd8cec
   if (usbCarrier > 12010000l || usbCarrier < 11990000l)
     usbCarrier = 11995000l;
+
+  if (cwmCarrier > 12010000l || cwmCarrier < 11990000l)
+    cwmCarrier = 11995000l;
     
   if (vfoA > 35000000l || 3500000l > vfoA) {
      vfoA = 7150000l;
@@ -923,6 +1048,7 @@ void initPorts(){
 
   pinMode(PTT, INPUT_PULLUP);
   pinMode(ANALOG_KEYER, INPUT_PULLUP);
+  pinMode(ANALOG_SMETER, INPUT); //by KD8CEC
 
   pinMode(CW_TONE, OUTPUT);  
   digitalWrite(CW_TONE, 0);
@@ -958,7 +1084,7 @@ void setup()
   
   //Serial.begin(9600);
   lcd.begin(16, 2);
-  printLineF(1, F("CECBT v0.30")); 
+  printLineF(1, F("CECBT v0.33")); 
 
   Init_Cat(38400, SERIAL_8N1);
   initMeter(); //not used in this build
@@ -972,15 +1098,16 @@ void setup()
   else {
     printLineF(0, F("uBITX v0.20")); 
     delay(500);
-    printLine2(""); 
+    clearLine2();
   }
   
   initPorts();     
+
+  byteToMode(vfoA_mode);
   initOscillators();
 
   frequency = vfoA;
   saveCheckFreq = frequency;  //for auto save frequency
-  byteToMode(vfoA_mode);
   setFrequency(vfoA);
   updateDisplay();
 
@@ -1044,9 +1171,16 @@ void loop(){
   if (!inTx){
     if (ritOn)
       doRIT();
+    //else if (isIFShift)
+    //  doIFShift();
     else 
       doTuningWithThresHold();
-  }
+
+    if (isCWAutoMode == 0 && beforeIdle_ProcessTime < millis() - 250) {
+      idle_process();
+      beforeIdle_ProcessTime = millis();
+    }
+  } //end of check TX Status
 
   //we check CAT after the encoder as it might put the radio into TX
   Check_Cat(inTx? 1 : 0);

ubitx_20/ubitx_factory_alignment.ino

@@ -14,6 +14,7 @@ void btnWaitForClick(){
 void factory_alignment(){
         
   factoryCalibration(1);
+  line2DisplayStatus = 1;
 
   if (calibration == 0){
     printLine2("Setup Aborted");
@@ -36,6 +37,7 @@ void factory_alignment(){
 
   
   printLine2("#3:Test 3.5MHz");
+  cwMode = 0;
   isUSB = false;
   setFrequency(3500000l);
   updateDisplay();
@@ -58,6 +60,7 @@ void factory_alignment(){
   btnWaitForClick();
   printLine2("#5:Test 14MHz");
 
+  cwMode = 0;
   isUSB = true;
   setFrequency(14000000l);
   updateDisplay();
@@ -79,6 +82,7 @@ void factory_alignment(){
   printLine2("Alignment done");
   delay(1000);
 
+  cwMode = 0;
   isUSB = false;
   setFrequency(7150000l);
   updateDisplay();  

ubitx_20/ubitx_idle.ino

@@ -0,0 +1,237 @@
+/*************************************************************************
+  KD8CEC's uBITX Idle time Processing
+  Functions that run at times that do not affect TX, CW, and CAT
+  It is called in 1/10 time unit.
+-----------------------------------------------------------------------------
+   This program is free software: you can redistribute it and/or modify
+   it under the terms of the GNU General Public License as published by
+   the Free Software Foundation, either version 3 of the License, or
+   (at your option) any later version.
+
+   This program is distributed in the hope that it will be useful,
+   but WITHOUT ANY WARRANTY; without even the implied warranty of
+   MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+   GNU General Public License for more details.
+
+   You should have received a copy of the GNU General Public License
+   along with this program.  If not, see <http://www.gnu.org/licenses/>.
+
+**************************************************************************/
+byte line2Buffer[16];
+//KD8CEC 200Hz ST
+//L14.150 200Hz ST
+//U14.150 +150khz
+int freqScrollPosition = 0;
+//Example Line2 Optinal Display
+//immediate execution, not call by scheulder
+void updateLine2Buffer(char isDirectCall)
+{
+  unsigned long tmpFreq = 0;
+  if (isDirectCall == 0)
+  {
+    if (ritOn)
+    {
+      line2Buffer[0] = 'R';
+      line2Buffer[1] = 'i';
+      line2Buffer[2] = 't';
+      line2Buffer[3] = 'T';
+      line2Buffer[4] = 'X';
+      line2Buffer[5] = ':';
+  
+      //display frequency
+      tmpFreq = ritTxFrequency;
+      for (int i = 15; i >= 6; i--) {
+        if (tmpFreq > 0) {
+          if (i == 12 || i == 8) line2Buffer[i] = '.';
+          else {
+            line2Buffer[i] = tmpFreq % 10 + 0x30;
+            tmpFreq /= 10;
+          }
+        }
+        else
+          line2Buffer[i] = ' ';
+      }
+  
+      return;
+    }
+    
+    if (vfoActive == VFO_B)
+    {
+      tmpFreq = vfoA;
+      //line2Buffer[0] = 'A';
+    }
+    else 
+    {
+      tmpFreq = vfoB;
+      //line2Buffer[0] = 'B';
+    }
+  
+    // EXAMPLE 1 & 2
+    //U14.150.100
+    //display frequency
+    for (int i = 9; i >= 0; i--) {
+      if (tmpFreq > 0) {
+        if (i == 2 || i == 6) line2Buffer[i] = '.';
+        else {
+          line2Buffer[i] = tmpFreq % 10 + 0x30;
+          tmpFreq /= 10;
+        }
+      }
+      else
+        line2Buffer[i] = ' ';
+    }
+  
+    //EXAMPLE #1
+    if ((displayOption1 & 0x04) == 0x00)
+      line2Buffer[6] = 'k';
+    else
+    {
+      //example #2
+      if (freqScrollPosition++ > 18)
+      {
+        line2Buffer[6] = 'k';
+        if (freqScrollPosition > 25)
+          freqScrollPosition = -1;
+      }
+      else
+      {
+        line2Buffer[10] = 'H';
+        line2Buffer[11] = 'z';
+    
+        if (freqScrollPosition < 7)
+        {
+          for (int i = 11; i >= 0; i--)
+            if (i - (7 - freqScrollPosition) >= 0)
+              line2Buffer[i] = line2Buffer[i - (7 - freqScrollPosition)];
+            else
+              line2Buffer[i] = ' ';
+        }
+        else
+        {
+          for (int i = 0; i < 11; i++)
+            if (i + (freqScrollPosition - 7) <= 11)
+              line2Buffer[i] = line2Buffer[i + (freqScrollPosition - 7)];
+            else
+              line2Buffer[i] = ' ';
+        }
+      }
+    }
+    line2Buffer[7] = ' ';
+  } //check direct call by encoder
+
+  
+  if (isIFShift)
+  {
+    if (isDirectCall == 1)
+      for (int i = 0; i < 16; i++)
+        line2Buffer[i] = ' ';
+      
+      //IFShift Offset Value 
+    line2Buffer[8] = 'I';
+    line2Buffer[9] = 'F';
+
+    if (ifShiftValue == 0)
+    {
+      line2Buffer[10] = 'S';
+      line2Buffer[11] = ':';
+      line2Buffer[12] = 'O';
+      line2Buffer[13] = 'F';
+      line2Buffer[14] = 'F';
+    }
+    else
+    {
+      line2Buffer[10] = ifShiftValue >= 0 ? '+' : 0;
+      line2Buffer[11] = 0;
+      line2Buffer[12] = ' ';
+    
+      //11, 12, 13, 14, 15
+      memset(b, 0, sizeof(b));
+      ltoa(ifShiftValue, b, DEC);
+      strncat(line2Buffer, b, 5);
+    }
+    
+    if (isDirectCall == 1)  //if call by encoder (not scheduler), immediate print value
+        printLine2(line2Buffer);    
+  }
+  else
+  {
+    if (isDirectCall != 0)
+      return;
+      
+    //Step
+    byte tmpStep = arTuneStep[tuneStepIndex -1];
+    for (int i = 10; i >= 8; i--) {
+      if (tmpStep > 0) {
+          line2Buffer[i] = tmpStep % 10 + 0x30;
+          tmpStep /= 10;
+      }
+      else
+        line2Buffer[i] = ' ';
+    }
+    line2Buffer[11] = 'H';
+    line2Buffer[12] = 'z';
+  
+    line2Buffer[13] = ' ';
+    //if (
+    //Check CW Key cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
+    if (cwKeyType == 0)
+    {
+      line2Buffer[14] = 'S';
+      line2Buffer[15] = 'T';
+    }
+    else if (cwKeyType == 1)
+    {
+      line2Buffer[14] = 'I';
+      line2Buffer[15] = 'A';
+    }
+    else
+    {
+      line2Buffer[14] = 'I';
+      line2Buffer[15] = 'B';
+    }    
+  }
+  
+}
+
+//meterType : 0 = S.Meter, 1 : P.Meter
+void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
+{
+  drawMeter(meterValue);  //call original source code
+  int lineNumber = 0;
+  if ((displayOption1 & 0x01) == 0x01)
+    lineNumber = 1;
+  
+  lcd.setCursor(drawPosition, lineNumber);
+
+  for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
+    lcd.write(lcdMeter[i]);
+
+}
+
+byte testValue = 0;
+char checkCount = 0;
+void idle_process()
+{
+  //space for user graphic display
+  if (menuOn == 0)
+  {
+    //if line2DisplayStatus == 0 <-- this condition is clear Line, you can display any message
+    if (line2DisplayStatus == 0 || (((displayOption1 & 0x04) == 0x04) && line2DisplayStatus == 2)) {
+      if (checkCount++ > 1)
+      {
+        updateLine2Buffer(0); //call by scheduler
+        printLine2(line2Buffer);
+        line2DisplayStatus = 2;
+        checkCount = 0;
+      }
+
+      //EX for Meters
+      /*
+      DisplayMeter(0, testValue++, 7);
+      if (testValue > 30)
+        testValue = 0;
+      */
+    }
+  }
+}
+

ubitx_20/ubitx_keyer.ino

@@ -91,8 +91,6 @@ void cwKeyUp(){
 #define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
 enum KSTYPE {IDLE, CHK_DIT, CHK_DAH, KEYED_PREP, KEYED, INTER_ELEMENT };
 static long ktimer;
-bool Iambic_Key = true;
-unsigned char keyerControl = IAMBICB;
 unsigned char keyerState = IDLE;
 
 //Below is a test to reduce the keying error. do not delete lines
@@ -101,17 +99,17 @@ char update_PaddleLatch(byte isUpdateKeyState) {
   unsigned char tmpKeyerControl;
   int paddle = analogRead(ANALOG_KEYER);
 
-  if (paddle > cwAdcDashFrom && paddle < cwAdcDashTo)
+  if (paddle >= cwAdcDashFrom && paddle <= cwAdcDashTo)
     tmpKeyerControl |= DAH_L;
-  else if (paddle > cwAdcDotFrom && paddle < cwAdcDotTo)
+  else if (paddle >= cwAdcDotFrom && paddle <= cwAdcDotTo)
     tmpKeyerControl |= DIT_L;
-  else if (paddle > cwAdcBothFrom && paddle < cwAdcBothTo)
+  else if (paddle >= cwAdcBothFrom && paddle <= cwAdcBothTo)
     tmpKeyerControl |= (DAH_L | DIT_L) ;     
   else 
   {
     if (Iambic_Key)
       tmpKeyerControl = 0 ;
-    else if (paddle > cwAdcSTFrom && paddle < cwAdcSTTo)
+    else if (paddle >= cwAdcSTFrom && paddle <= cwAdcSTTo)
       tmpKeyerControl = DIT_L ;
      else
        tmpKeyerControl = 0 ; 

ubitx_20/ubitx_menu.ino

@@ -87,6 +87,8 @@ void menuBand(int btn){
             stepChangeCount = 0;
           }
         }
+
+      //setFrequency(frequency + 200000l);
       }
       else {  //original source
         if (knob < 0 && frequency > 3000000l)
@@ -119,30 +121,56 @@ void menuBand(int btn){
 }
 
 //Convert Mode, Number by KD8CEC
-//0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
+//0: default, 1:not use, 2:LSB, 3:USB, 4:CWL, 5:CWU, 6:FM
 byte modeToByte(){
-  if (isUSB)
-    return 3;
+  if (cwMode == 0)
+  {
+    if (isUSB)
+      return 3;
+    else
+      return 2;
+  }
+  else if (cwMode == 1)
+  {
+    return 4;
+  }
   else
-    return 2;
+  {
+    return 5;
+  }
 }
 
 //Convert Number to Mode by KD8CEC
 void byteToMode(byte modeValue){
-  if (modeValue == 3)
-    isUSB = 1;
+  if (modeValue == 4)
+    cwMode = 1;
+  else if (modeValue == 5)
+    cwMode = 2;
   else
-    isUSB = 0;
+  {
+    cwMode = 0;
+    if (modeValue == 3)
+      isUSB = 1;
+    else
+      isUSB = 0;
+  }
 }
 
 //Convert Number to Mode by KD8CEC
 void byteWithFreqToMode(byte modeValue){
-  if (modeValue == 3)
-    isUSB = 1;
-  else if (modeValue == 0)  //Not Set
-    isUSB = (frequency > 10000000l) ? true : false;
-  else
-    isUSB = 0;
+  if (modeValue == 4)
+    cwMode = 1;
+  else if (modeValue == 5)
+    cwMode = 2;
+  else  {
+    cwMode = 0;
+    if (modeValue == 3)
+      isUSB = 1;
+    else if (modeValue == 0)  //Not Set
+      isUSB = (frequency > 10000000l) ? true : false;
+    else
+      isUSB = 0;
+  }
 }
 
 //VFO Toggle and save VFO Information, modified by KD8CEC
@@ -179,10 +207,11 @@ void menuVfoToggle(int btn, char isUseDelayTime)
       }
 
       ritDisable();
+      setFrequency(frequency);
 
       if (isUseDelayTime == 1)        //Found Issue in wsjt-x Linux 32bit 
         delay_background(500, 0);
-        
+
       printLine2ClearAndUpdate();
       //exit the menu
       menuOn = 0;
@@ -212,6 +241,94 @@ void menuRitToggle(int btn){
   }
 }
 
+/*
+void menuIFSToggle(int btn){
+  if (!btn){
+    if (isIFShift == 1)
+      printLineF2(F("IF Shift:On, Off?"));
+    else
+      printLineF2(F("IF Shift:Off, On?"));
+  }
+  else {
+      if (isIFShift == 0){
+        printLineF2(F("IF Shift is ON"));
+        isIFShift = 1;
+      }
+      else{
+        printLineF2(F("IF Shift is OFF"));
+        isIFShift = 0;
+      }
+      menuOn = 0;
+      delay_background(500, 0);
+      printLine2ClearAndUpdate();
+  }
+}
+*/
+void menuIFSToggle(int btn){
+  int knob = 0;
+  char needApplyChangeValue = 1;
+  
+  if (!btn){
+    if (isIFShift == 1)
+      printLineF2(F("IF Shift Change?"));
+    else
+      printLineF2(F("IF Shift:Off, On?"));
+  }
+  else {
+      if (isIFShift == 0){
+        printLineF2(F("IF Shift is ON"));
+        delay_background(500, 0);
+        isIFShift = 1;
+      }
+
+      delay_background(500, 0);
+      updateLine2Buffer(1);
+      setFrequency(frequency);
+
+      //Off or Change Value
+      while(!btnDown() && digitalRead(PTT) == HIGH){
+        if (needApplyChangeValue ==1)
+        {
+          updateLine2Buffer(1);
+          setFrequency(frequency);
+        
+          if (cwMode == 0)
+            si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+          else
+            si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+
+          needApplyChangeValue = 0;
+        }
+        
+        knob = enc_read();
+        if (knob != 0){
+          if (knob < 0)
+            ifShiftValue -= 1l;
+          else if (knob > 0)
+            ifShiftValue += 1;
+
+          needApplyChangeValue = 1;
+        }
+      }
+
+      delay_background(500, 0); //for check Long Press function key
+      
+      if (btnDown() || digitalRead(PTT) == LOW || ifShiftValue == 0)
+      {
+        isIFShift = 0;
+        printLineF2(F("IF Shift is OFF"));
+        setFrequency(frequency);
+        delay_background(500, 0);
+      }
+      
+      menuOn = 0;
+      //delay_background(500, 0);
+      printLine2ClearAndUpdate();
+  }
+}
+
+
+/* 
 void menuSidebandToggle(int btn){
   if (!btn){
     if (isUSB == true)
@@ -220,6 +337,7 @@ void menuSidebandToggle(int btn){
       printLineF2(F("Select USB?"));
   }
   else {
+      cwMode = 0;
       if (isUSB == true){
         isUSB = false;
         printLineF2(F("LSB Selected"));
@@ -234,7 +352,133 @@ void menuSidebandToggle(int btn){
     menuOn = 0;
   }
 }
+*/
+void menuSelectMode(int btn){
+  int knob = 0;
+  int selectModeType = 0;
+  int beforeMode = 0;
+  int moveStep = 0;
+  
+  if (!btn){
+      printLineF2(F("Select Mode?"));
+  }
+  else {
+    delay_background(500, 0);
 
+    //LSB, USB, CWL, CWU
+    if (cwMode == 0 && isUSB == 0)
+      selectModeType = 0;
+    else if (cwMode == 0 && isUSB == 1)
+      selectModeType = 1;
+    else if (cwMode == 1)
+      selectModeType = 2;
+    else
+      selectModeType = 3;
+
+    beforeMode = selectModeType;
+
+    while(!btnDown() && digitalRead(PTT) == HIGH){
+      //Display Mode Name
+      printLineF1(F("LSB USB CWL CWU"));
+      if (selectModeType == 0)
+        printLineF1(F("LSB"));
+      else if (selectModeType == 1)
+        printLineF1(F("USB"));
+      else if (selectModeType == 2)
+        printLineF1(F("CWL"));
+      else if (selectModeType == 3)
+        printLineF1(F("CWU"));
+
+      knob = enc_read();
+
+      if (knob != 0)
+      {
+        moveStep += (knob > 0 ? 1 : -1);
+        if (moveStep < -3) {
+          if (selectModeType > 0)
+            selectModeType--;
+            
+          moveStep = 0;
+        }
+        else if (moveStep > 3) {
+          if (selectModeType < 3)
+            selectModeType++;
+            
+          moveStep = 0;
+        }
+      }
+
+      Check_Cat(0);  //To prevent disconnections
+    }
+
+    if (beforeMode != selectModeType) {
+      printLineF1(F("Changed Mode"));
+      
+      if (selectModeType == 0) {
+        cwMode = 0; isUSB = 0;
+      }
+      else if (selectModeType == 1) {
+        cwMode = 0; isUSB = 1;
+      }
+      else if (selectModeType == 2) {
+        cwMode = 1;
+      }
+      else if (selectModeType == 3) {
+        cwMode = 2;
+      }
+
+      //Save Frequency & Mode Information
+      if (vfoActive == VFO_A)
+      {
+        vfoA = frequency;
+        vfoA_mode = modeToByte();
+        storeFrequencyAndMode(1);
+      }
+      else
+      {
+        vfoB = frequency;
+        vfoB_mode = modeToByte();
+        storeFrequencyAndMode(2);
+      }
+    }
+
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+  else
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));  //set back the carrier oscillator anyway, cw tx switches it off
+    
+    setFrequency(frequency);
+    delay_background(500, 0);
+    printLine2ClearAndUpdate();
+    menuOn = 0;
+  }
+}
+
+void menuSplitOnOff(int btn){
+  if (!btn){
+    if (splitOn == 0)
+      printLineF2(F("Split On?"));
+    else
+      printLineF2(F("Split Off?"));
+  }
+  else {
+      if (splitOn == 1){
+        splitOn = 0;
+        printLineF2(F("Split Off!"));
+      }
+      else {
+        splitOn = 1;
+        if (ritOn == 1)
+          ritOn = 0;
+        printLineF2(F("Split On!"));
+      }
+    delay_background(500, 0);
+    printLine2ClearAndUpdate();
+    menuOn = 0;
+  }
+}
+
+/*
 //Select CW Key Type by KD8CEC
 void menuSetupKeyType(int btn){
   if (!btn && digitalRead(PTT) == HIGH){
@@ -269,6 +513,71 @@ void menuSetupKeyType(int btn){
     menuOn = 0;
   }
 }
+*/
+
+//Select CW Key Type by KD8CEC
+void menuSetupKeyType(int btn){
+  int knob = 0;
+  int selectedKeyType = 0;
+  int moveStep = 0;
+  if (!btn){
+        printLineF2(F("Change Key Type?"));
+  }
+  else {
+    printLineF2(F("Press to set Key"));
+    delay_background(500, 0);
+    selectedKeyType = cwKeyType;
+    
+    while(!btnDown()){
+
+      //Display Key Type
+      if (selectedKeyType == 0)
+        printLineF1(F("Straight"));
+      else if (selectedKeyType == 1)
+        printLineF1(F("IAMBICA"));
+      else if (selectedKeyType == 2)
+        printLineF1(F("IAMBICB"));
+
+      knob = enc_read();
+
+      if (knob != 0)
+      {
+        moveStep += (knob > 0 ? 1 : -1);
+        if (moveStep < -3) {
+          if (selectedKeyType > 0)
+            selectedKeyType--;
+          moveStep = 0;
+        }
+        else if (moveStep > 3) {
+          if (selectedKeyType < 2)
+            selectedKeyType++;
+          moveStep = 0;
+        }
+      }
+
+      Check_Cat(0);  //To prevent disconnections
+    }
+    
+    printLineF2(F("CW Key Type set!"));
+    cwKeyType = selectedKeyType;
+    EEPROM.put(CW_KEY_TYPE, cwKeyType);
+
+    if (cwKeyType == 0)
+      Iambic_Key = false;
+    else
+    {
+      Iambic_Key = true;
+      if (cwKeyType == 1)
+        keyerControl &= ~IAMBICB;
+      else
+        keyerControl |= IAMBICB;
+    }
+    delay_background(2000, 0);
+    
+    printLine2ClearAndUpdate();
+    menuOn = 0;
+  }
+}
 
 //Analog pin monitoring with CW Key and function keys connected.
 //by KD8CEC
@@ -425,7 +734,7 @@ void menuCWSpeed(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press to set WPm"));
     strcpy(b, "WPM:");
     itoa(wpm,c, 10);
     strcat(b, c);
@@ -455,12 +764,12 @@ void menuCWSpeed(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Speed set!"));
       cwSpeed = 1200/wpm;
       EEPROM.put(CW_SPEED, cwSpeed);
       delay_background(2000, 0);
-    }
+    //}
     printLine2ClearAndUpdate();
     menuOn = 0;
 }
@@ -500,7 +809,7 @@ void menuSetupCwDelay(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press, set Delay"));
     strcpy(b, "DELAY:");
     itoa(tmpCWDelay,c, 10);
     strcat(b, c);
@@ -528,12 +837,12 @@ void menuSetupCwDelay(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Delay set!"));
       cwDelayTime = tmpCWDelay / 10;
       EEPROM.put(CW_DELAY, cwDelayTime);
       delay_background(2000, 0);
-    }
+    //}
     printLine2ClearAndUpdate();
     menuOn = 0;
 }
@@ -549,7 +858,7 @@ void menuSetupTXCWInterval(int btn){
      return;
     }
 
-    printLineF1(F("Press PTT to set"));
+    printLineF1(F("Press, set Delay"));
     strcpy(b, "Start Delay:");
     itoa(tmpTXCWInterval,c, 10);
     strcat(b, c);
@@ -577,12 +886,12 @@ void menuSetupTXCWInterval(int btn){
     }
     
     //save the setting
-    if (digitalRead(PTT) == LOW){
+    //if (digitalRead(PTT) == LOW){
       printLineF2(F("CW Start set!"));
       delayBeforeCWStartTime = tmpTXCWInterval / 2;
       EEPROM.put(CW_START, delayBeforeCWStartTime);
       delay_background(2000, 0);
-    }
+    //}
     printLine2ClearAndUpdate();
     menuOn = 0;
 }
@@ -617,6 +926,7 @@ void factoryCalibration(int btn){
 
   calibration = 0;
 
+  cwMode = 0;
   isUSB = true;
 
   //turn off the second local oscillator and the bfo
@@ -734,7 +1044,6 @@ void menuSetupCalibration(int btn){
   menuOn = 0;
 }
 
-
 void printCarrierFreq(unsigned long freq){
 
   memset(c, 0, sizeof(c));
@@ -746,7 +1055,7 @@ void printCarrierFreq(unsigned long freq){
   strcat(c, ".");
   strncat(c, &b[2], 3);
   strcat(c, ".");
-  strncat(c, &b[5], 1);
+  strncat(c, &b[5], 3);
   printLine2(c);    
 }
 
@@ -798,12 +1107,71 @@ void menuSetupCarrier(int btn){
   else 
     usbCarrier = prevCarrier;
 
-  si5351bx_setfreq(0, usbCarrier);          
+  //si5351bx_setfreq(0, usbCarrier);          
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+  else
+    si5351bx_setfreq(0, cwmCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+  
   setFrequency(frequency);    
   printLine2ClearAndUpdate();
   menuOn = 0; 
 }
 
+//Append by KD8CEC
+void menuSetupCWCarrier(int btn){
+  int knob = 0;
+  unsigned long prevCarrier;
+   
+  if (!btn){
+      printLineF2(F("Set CW RX BFO"));
+    return;
+  }
+
+  prevCarrier = cwmCarrier;
+  printLineF1(F("PTT to confirm. "));
+  delay_background(1000, 0);
+
+  si5351bx_setfreq(0, cwmCarrier);
+  printCarrierFreq(cwmCarrier);
+
+  //disable all clock 1 and clock 2 
+  while (digitalRead(PTT) == HIGH && !btnDown())
+  {
+    knob = enc_read();
+
+    if (knob > 0)
+      cwmCarrier -= 5;
+    else if (knob < 0)
+      cwmCarrier += 5;
+    else
+      continue; //don't update the frequency or the display
+      
+    si5351bx_setfreq(0, cwmCarrier);
+    printCarrierFreq(cwmCarrier);
+
+    Check_Cat(0);  //To prevent disconnections
+    delay(100);
+  }
+
+  //save the setting
+  if (digitalRead(PTT) == LOW){
+    printLineF2(F("Carrier set!"));
+    EEPROM.put(CW_CAL, cwmCarrier);
+    delay_background(1000, 0);
+  }
+  else 
+    cwmCarrier = prevCarrier;
+
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+  else
+    si5351bx_setfreq(0, cwmCarrier);  //set back the carrier oscillator anyway, cw tx switches it off
+  
+  setFrequency(frequency);    
+  printLine2ClearAndUpdate();
+  menuOn = 0; 
+}
 //Modified by KD8CEC
 void menuSetupCwTone(int btn){
     int knob = 0;
@@ -907,7 +1275,7 @@ void doMenu(){
   //ADJUST TUNE STEP 
   if (btnDownTimeCount > (PRESS_ADJUST_TUNE / 50))
   {
-    printLineF1(F("Press Key to set"));
+    printLineF1(F("Press to set step"));
     isNeedDisplay = 1; //check to need display for display current value
     
     while (digitalRead(PTT) == HIGH && !btnDown())
@@ -960,9 +1328,9 @@ void doMenu(){
     btnState = btnDown();
 
     if (i > 0){
-      if (modeCalibrate && select + i < 170)
+      if (modeCalibrate && select + i < 200)
         select += i;
-      if (!modeCalibrate && select + i < 80)
+      if (!modeCalibrate && select + i < 100)
         select += i;
     }
     //if (i < 0 && select - i >= 0)
@@ -974,36 +1342,42 @@ void doMenu(){
     else if (select < 10)
       menuBand(btnState);
     else if (select < 20)
-      menuRitToggle(btnState);
-    else if (select < 30)
       menuVfoToggle(btnState, 1);
+    else if (select < 30)
+      menuSelectMode(btnState);
     else if (select < 40)
-      menuSidebandToggle(btnState);
+      menuRitToggle(btnState);
     else if (select < 50)
-      menuCWSpeed(btnState);
+      menuIFSToggle(btnState);
     else if (select < 60)
-      menuCWAutoKey(btnState);
+      menuCWSpeed(btnState);
     else if (select < 70)
+      menuSplitOnOff(btnState);      //SplitOn / off
+    else if (select < 80)
+      menuCWAutoKey(btnState);
+    else if (select < 90)
       menuSetup(btnState);
-    else if (select < 80 && !modeCalibrate)
+    else if (select < 100)
       menuExit(btnState);
-    else if (select < 90 && modeCalibrate)
-      menuSetupCalibration(btnState);   //crystal
-    else if (select < 100 && modeCalibrate)
-      menuSetupCarrier(btnState);       //lsb
     else if (select < 110 && modeCalibrate)
-      menuSetupCwTone(btnState);
+      menuSetupCalibration(btnState);   //crystal
     else if (select < 120 && modeCalibrate)
-      menuSetupCwDelay(btnState);
+      menuSetupCarrier(btnState);       //lsb
     else if (select < 130 && modeCalibrate)
-      menuSetupTXCWInterval(btnState);
+      menuSetupCWCarrier(btnState);       //lsb
     else if (select < 140 && modeCalibrate)
-      menuSetupKeyType(btnState);
+      menuSetupCwTone(btnState);
     else if (select < 150 && modeCalibrate)
-      menuADCMonitor(btnState);
+      menuSetupCwDelay(btnState);
     else if (select < 160 && modeCalibrate)
-      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
+      menuSetupTXCWInterval(btnState);
     else if (select < 170 && modeCalibrate)
+      menuSetupKeyType(btnState);
+    else if (select < 180 && modeCalibrate)
+      menuADCMonitor(btnState);
+    else if (select < 190 && modeCalibrate)
+      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
+    else if (select < 200 && modeCalibrate)
       menuExit(btnState);
 
     Check_Cat(0);  //To prevent disconnections

ubitx_20/ubitx_si5351.ino

@@ -109,7 +109,11 @@ void initOscillators(){
   //initialize the SI5351
   si5351bx_init();
   si5351bx_vcoa = (SI5351BX_XTAL * SI5351BX_MSA) + calibration; // apply the calibration correction factor
-  si5351bx_setfreq(0, usbCarrier);
+
+  if (cwMode == 0)
+    si5351bx_setfreq(0, usbCarrier + (isIFShift ? ifShiftValue : 0));
+ else
+    si5351bx_setfreq(0, cwmCarrier + (isIFShift ? ifShiftValue : 0));
 }
 
 

ubitx_20/ubitx_ui.ino

@@ -25,8 +25,8 @@ int btnDown(){
  * The current reading of the meter is assembled in the string called meter
  */
 
-//char meter[17];
 
+/*
 const PROGMEM uint8_t s_meter_bitmap[] = {
   B00000,B00000,B00000,B00000,B00000,B00100,B00100,B11011,
   B10000,B10000,B10000,B10000,B10100,B10100,B10100,B11011,
@@ -35,7 +35,18 @@ const PROGMEM uint8_t s_meter_bitmap[] = {
   B00010,B00010,B00010,B00010,B00110,B00110,B00110,B11011,
   B00001,B00001,B00001,B00001,B00101,B00101,B00101,B11011
 };
-PGM_P ps_meter_bitmap = reinterpret_cast<PGM_P>(s_meter_bitmap);
+*/
+
+const PROGMEM uint8_t meters_bitmap[] = {
+  B10000,  B10000,  B10000,  B10000,  B10000,  B10000,  B10000,  B10000 ,   //custom 1
+  B11000,  B11000,  B11000,  B11000,  B11000,  B11000,  B11000,  B11000 ,   //custom 2
+  B11100,  B11100,  B11100,  B11100,  B11100,  B11100,  B11100,  B11100 ,   //custom 3
+  B11110,  B11110,  B11110,  B11110,  B11110,  B11110,  B11110,  B11110 ,   //custom 4
+  B11111,  B11111,  B11111,  B11111,  B11111,  B11111,  B11111,  B11111 ,   //custom 5
+  B01000,  B11100,  B01000,  B00000,  B10111,  B10101,  B10101,  B10111     //custom 6
+};
+
+PGM_P p_metes_bitmap = reinterpret_cast<PGM_P>(meters_bitmap);
 
 const PROGMEM uint8_t lock_bitmap[8] = {
   0b01110,
@@ -60,38 +71,56 @@ void initMeter(){
   lcd.createChar(0, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i);
   lcd.createChar(1, tmpbytes);
 
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 8);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 8);
   lcd.createChar(2, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 16);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 16);
   lcd.createChar(3, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 24);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 24);
   lcd.createChar(4, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 28);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 32);
   lcd.createChar(5, tmpbytes);
   
   for (i = 0; i < 8; i++)
-    tmpbytes[i] = pgm_read_byte(ps_meter_bitmap + i + 32);
+    tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 40);
   lcd.createChar(6, tmpbytes);
 }
 
-/**
- * The meter is drawn with special characters.
- * character 1 is used to simple draw the blocks of the scale of the meter
- * characters 2 to 6 are used to draw the needle in positions 1 to within the block
- * This displays a meter from 0 to 100, -1 displays nothing
- */
+//by KD8CEC
+//0 ~ 25 : 30 over : + 10
+void drawMeter(int needle) {
+  //5Char + O over
+  int drawCharLength = needle / 5;
+  int drawCharLengthLast = needle % 5;
+  int i;
 
- /*
+  for (i = 0; i < 5; i++) {
+    if (needle >= 5)
+      lcdMeter[i] = 5; //full
+    else if (needle > 0)
+      lcdMeter[i] = needle; //full
+    else  //0
+      lcdMeter[i] = 0x20;
+    
+    needle -= 5;
+  }
+
+  if (needle > 0)
+    lcdMeter[5] = 6;
+  else
+    lcdMeter[5] = 0x20;
+}
+
+/*
 void drawMeter(int8_t needle){
   int16_t best, i, s;
 
@@ -101,21 +130,23 @@ void drawMeter(int8_t needle){
   s = (needle * 4)/10;
   for (i = 0; i < 8; i++){
     if (s >= 5)
-      meter[i] = 1;
+      lcdMeter[i] = 1;
     else if (s >= 0)
-      meter[i] = 2 + s;
+      lcdMeter[i] = 2 + s;
     else
-      meter[i] = 1;
+      lcdMeter[i] = 1;
     s = s - 5;
   }
   if (needle >= 40)
-    meter[i-1] = 6;
-  meter[i] = 0;
+    lcdMeter[i-1] = 6;
+  lcdMeter[i] = 0;
 }
 */
-
 // The generic routine to display one line on the LCD 
 void printLine(unsigned char linenmbr, const char *c) {
+  if ((displayOption1 & 0x01) == 0x01)
+    linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
+    
   if (strcmp(c, printBuff[linenmbr])) {     // only refresh the display when there was a change
     lcd.setCursor(0, linenmbr);             // place the cursor at the beginning of the selected line
     lcd.print(c);
@@ -145,6 +176,9 @@ void printLineF(char linenmbr, const __FlashStringHelper *c)
 
 #define LCD_MAX_COLUMN 16
 void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex) {
+  if ((displayOption1 & 0x01) == 0x01)
+    linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
+  
   lcd.setCursor(lcdColumn, linenmbr);
 
   for (byte i = eepromStartIndex; i <= eepromEndIndex; i++)
@@ -168,6 +202,12 @@ void printLine2(const char *c){
   printLine(0,c);
 }
 
+void clearLine2()
+{
+  printLine2("");
+  line2DisplayStatus = 0;
+}
+
 //  short cut to print to the first line
 void printLine1Clear(){
   printLine(1,"");
@@ -179,6 +219,7 @@ void printLine2Clear(){
 
 void printLine2ClearAndUpdate(){
   printLine(0, "");
+  line2DisplayStatus = 0;  
   updateDisplay();
 }
 
@@ -221,10 +262,21 @@ void updateDisplay() {
     if (ritOn)
       strcpy(c, "RIT ");
     else {
-      if (isUSB)
-        strcpy(c, "USB ");
+      if (cwMode == 0)
+      {
+        if (isUSB)
+          strcpy(c, "USB ");
+        else
+          strcpy(c, "LSB ");
+      }
+      else if (cwMode == 1)
+      {
+          strcpy(c, "CWL ");
+      }
       else
-        strcpy(c, "LSB ");
+      {
+          strcpy(c, "CWU ");
+      }
     }
     if (vfoActive == VFO_A) // VFO A is active
       strcat(c, "A:");
@@ -251,18 +303,22 @@ void updateDisplay() {
   //  strcat(c, " TX");
   printLine(1, c);
 
+  byte diplayVFOLine = 1;
+  if ((displayOption1 & 0x01) == 0x01)
+    diplayVFOLine = 0;
+
   if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
     (vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write((uint8_t)0);
   }
   else if (isCWAutoMode == 2){
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write(0x7E);
   }
   else
   {
-    lcd.setCursor(5,1);
+    lcd.setCursor(5,diplayVFOLine);
     lcd.write(":");
   }