stk-code_catmod/data/stk_config.xml

<?xml version="1.0"?>

<config>
  <!--  Minimum and maximum kart versions that can be used by this binary.
        Older version will be ignored. -->
  <kart-version min="2" max="2"/>

  <!-- Minimum and maxium track versions that be be read by this binary.
       Older versions will be ignored. -->
  <track-version min="2" max="2"/>

  <!-- Maximum number of karts to be used at the same time. This limit
       can easily be increased, but some tracks might not have valid start
       positions for those additional karts. -->
  <karts max-number="20"/>

  <!-- Scores are the number of points given when the race ends, 
       order is most-points-first or most-points-last. -->
  <grand-prix order = "most-points-first">
    <!-- Karts on position 1 and 2 will have 3 more points than the next kart;
         a kart on position 3 and 4 will have two more points than the next;
         and all remaining karts will have one more point than the next. -->
    <points from="1" to="2" points="3"/>
    <points from="3" to="4" points="2"/>
    <points from="5"        points="1"/>
  </grand-prix>

  <!-- Time in follow-the-leader after which karts are removed.
       The last values applies for all remaining karts. 
       time-per-kart Additional time added to the interval
       for each kart in the race. -->
  <follow-the-leader intervals="30 20 10"
                     time-per-kart="1.5"  />

  <!-- Startup information. 
       Penalty: Penalty time if a kart accelerates before GO. -->
  <startup penalty="1" />

  <!-- The title music. -->
  <music title="main_theme.music"/>

  <!-- Mostly for debugging: maximum number of history entrie$a -->
  <history max-frames="10000"/>

  <!-- Skidmark data: maximum number of skid marks, and
       time for skidmars to fade out. -->
  <skid-marks max-number="100"  fadeout-time="60"/>   
 
  <!-- Defines when the upright constraint should be acctive, it's
       disables when the kart is more than this value from the track. -->
  <near-ground distance="2"/> 

  <!-- How long the end animation will be shown. -->
  <delay-finish time="0.5"/>

  <!-- How long the music credits are shown. -->
  <credits music="10"/>

  <!-- weight is the additional weight an anvil adds to a kart.
       speed-factor is the additional slowdown caused by the anvil.
       time is the time an anvil is active. -->
  <anvil time="2.0" weight="150"  speed-factor="0.2"/>

  <!-- friction is the friction increase when a parachute is attached.
       time is the time an attached parachute is active
       time-other is the time a parachute attached from other kart works
       done-fraction is the fraction of speed when lost will detach parachute -->
  <parachute friction="2.0" time="4.0" time-other="8.0" done-fraction="0.7"/>

  <!-- time is the time till a bomb explodes. time-increase is the time added 
       to timer when bomb is passed on. -->
  <bomb time="30.0" time-increase="-5.0"/>

  <!-- time is the time a zipper is active. force is the additional 
       zipper force. speed-gain is the one time additional speed.
       max-speed-fraction is a factor multiplied to the maximum 
       speed on the terrain.  -->
  <zipper time="3.5" force="250.0" speed-gain="4.5" max-speed-fraction="2.0"/>

  <!-- Powerup collect-mode decides what is collected if a kart has already an 
       powerup: same: get one more item of the same type.
                new:  always get a new item.
                only-if-same: if the random item is the same one as the
                      one currently owned, increase the number, otherwise
                      no more/new item s are given to the kart. -->
  <powerup collect-mode="new"/>
  <!-- time: How long a switch is being effective.
       items for each item list the index of the item it is switched with.
             Order: item, banana, big-nitro, small-nitro, bubble-bum -->
  <switch time="5"  items="1 0 4 4 2"/>

  <!-- How often bubble gum get driven over before it disappears. --> 
  <bubble-gum disappear-counter="1"/>

  <!-- impulse is the push from explosions when karts aren't hit directly.  
       explosion-impulse-objects is the impulse for physics objects (smaller
       ones like the cone, will be pushed way too far with normal impulse). -->
  <explosion impulse="10000.0" impulse-objects="500.0" />

  <!-- Networking - the current networking code is outdated and will not
      work anymore - so for now don't enable this. -->
  <networking enable="false"/>

  <!-- Default values for all karts
       ============================ -->
  <general-kart-defaults>
  
    <!-- Kart's center point:
        gravity-shift is the shift of the chassis with regards to the center of
                      mass. E.g. with the the value commented out below the 
                      chassis will be 30 cm higher than the  center of mass - 
                      or the center of mass will be 30 cm lower than the  
                      middle of the chassis. So this effectively lowers the 
                      center of mass, making the kart more stable and less 
                      likely to topple over. Default (if nothing is defined 
                      here) is that the center of the mass is at the very bottom
                      of the chassis.  -->
    <center  gravity-shift="0 0.3 0"/>

    <!-- Camera: Distance between kart and camera. 
         forward-up-angle: Angle between camera and plane of kart (pitch) 
                 when the camera is pointing forward
         backward-up-angke: Angle between camera and plane of kart (pitch)
                 when the camera is pointing backwards. This is usually 
                 larger than the forward-up-angle, since the kart itself
                 otherwise obstricts too much of the view.  -->
    <camera distance="1.5" forward-up-angle="15"
            backward-up-angle="30"/>

    <!-- If a kart starts within the specified time after 'go',
         it receives the corresponding bonus from 'boost'. Those
         fields must have the same size, and must be sorted by
         increasing times. -->
    <startup time   = "0.3 0.5"
             boost  = "6 3"  />

    <!-- Rescue: time: How long it takes the kart to be raised.
         height: how height the kart will be raised before it is
         dropped back onto the track. 
         vert rescue offset: used to raise karts a bit higher before
         releasing them on the ground after a rescue. Used to avoid
         resetting karts into the track. Not sure if this is still
         necessary. -->
    <rescue vert-offset="0.0" time="2" height="2"/>

    <!-- Nitro: power-boost: increase in engine power, i.e. 1=plus 100%
         consumption: nitro consumption - heavier characters can be set
         to need more nitro than lighter character.
         small-container: how much energy a small container gives.
         big-container: how much energy a big container gives. -->
    <nitro power-boost="3" consumption="1" small-container="1" big-container="3"/>

    <!-- Skidding: increase: multiplicative increase of skidding factor in each frame.
         decrease: multiplicative decrease of skidding factor in each frame.
         max: maximum skidding factor = maximum increase of steering angle.
         time-till-max: Time till maximum skidding is reached.
         visual: Additional graphical rotation of kart.  -->
    <skid increase="1.05" decrease="0.95" max="2.5" time-till-max="0.4"
          visual="0.16"/>

    <!-- Slipstream: length: How far behind a kart slipstream works
         collect-time: How many seconds of sstream give  maximum benefit
         use-time: How long the benefit will last.
         add-power: Additional power due to sstreaming. 1 = +100%
         min-speed: Minimum speed necessary for slipstream to take effect. -->
    <slipstream length="10" collect-time="2" use-time="5"
                add-power="3" min-speed="10" />

    <!-- min-speed-radius and max-speed-radius define the smallest turn 
         radius at lowest speed (4.64 m at speed 0) and at high speed
         (13.5 m at speed 12 m/s). Maximum steering angles for speeds 
         in between will be interpolated. This allows for tighter turns
         at lower speeds. The actual steering  angle is dependent on the
         wheel base of the kart: radius = wheel_base/sin(steering_angle)
         By specifying the radius the steering behaviour can be defined 
         independent of the kart size. 
         time-full-steer is the time when a player's input goes from neutral
                         steering to extreme left or right.
         time-full-steer-ai is the time for the AI to go from neutral steering to
                         extreme left (or right). This can be used to reduce 
                         'shaking' of AI karts caused by changing steering direction
                         too often. It also helps with making it easier to push the
                         AI karts (otherwise micro-corrections make this nearly
                         impossible). A value of 1/maxFPS / 2 will guarantee that
                         the wheel can go from -1 to +1 steering in one frame, 
                         basically  disabling this mechanism.       -->
    <turn min-speed-radius="0 3" max-speed-radius="10 15.0"
          time-full-steer ="0.2" time-full-steer-ai="0.1"    />

    <!-- Speed and acceleration related values: power and max-speed (in m/s) 
         have 3 values, one for low, medium, and hard.
         brake-factor: Value used when braking. max-speed-reverse-ratio is
         the percentage of max speed for reverse gear. -->
    <engine power="300 400 400"  max-speed="15 20 23" brake-factor="11.0"
            max-speed-reverse-ratio="0.3"/>

    <!-- Simulated gears: switch-ratio defines at what ratio of the maximum
         speed what gear is selected, e.g. 0.25 means that if the speed is
         bigger or equal to 0.25 x maxSpeed then use gear 1, 0.5 means if 
         the speed is bigger or equal to 0.5 x maxSpeed then gear 2.
         gear-power-increase contains the increase in max power (to simulate
         different gears), e.g. 2.5 as first entry means: 2.5*maxPower in gear 1
         | first  | second |  third | . -->
    <gear switch-ratio="0.25 0.7 1.0" power-increase="2.2 1.7 1.3"/>

    <!-- mass  -->
    <mass value="225"/>

    <!-- Suspension related values. stiffness: kart's suspension stiffness.
         rest Length of suspension when at rest. travel-cm: maximum 
         movement of suspension - in cm!!  -->
    <suspension stiffness="248.0" rest="0.2" travel-cm="19"/>

    <!-- Wheel related parameters: damping-relaxation/compression: for
         bullet, damping parameters. Radius and width of wheel.
         front-right, front-left, rear-right and rear-left give the 
         position of the physics raycast wheels relative to the center of
         gravity. Default is to use the corners of the chassis to attach 
         the wheels to. -->
    <wheels damping-relaxation="20"  damping-compression="4.4" radius="0.25">
      <front-right position="0.38 0 0.6"  />
      <front-left  position="-0.38 0 0.6" />
      <rear-right  position="0.38 0 -0.6" />
      <rear-left   position="-0.38 0 -0.6"/>
    </wheels>

    <!-- friction: slip used for bullet skidding. A high value 
         (like 10000000) disables bullet skidding. -->
    <friction slip="10000000"/>

    <!-- Values related to stability of the chassis: damping, and reduced
         impact of roll. -->
    <stability roll-influence="0.03"
               chassis-linear-damping="0.2"
               chassis-angular-damping="30.2"/>

    <!-- Parameters for the upright constraint, which keeps karts upright. -->
    <upright tolerance="0.2" max-force="30"/>

    <!-- An artificial force that pulls a wheel to the ground if its off
         ground. Reduces the affect if a kart loses contact with the ground
         (i.e. it then can't steer or accelerate anymore). -->
    <track-connection-accel value="2"/>

    <!-- jump-velocity is the z-axis velocity set when a jump is initiated.
         This will cause the kart to start rising, till it is pulled back
         by gravity. A higher value means higher Z velocity, meaning the 
         kart will rise faster and higher, and will be in the air longer.
         Notice that jumps are currently disabled, so this value is ignored.  -->
    <jump velocity="3.0"/>

    <!-- collision-side-impulse is an additional (artificial) impulse that
         pushes the slower kart out of the way of the faster karts (i.e. 
         sideways to the faster kart) when a collision happens. This is 
         for now disabled since it needs tuning and additionally has the
         problem that the amount of push a hit kart receives depends on
         the orientation - if a kart is pushed in the direction it is 
         driving, it will be more (no friction from tires), while when 
         pushed to the side, hardly anything happens.  -->
    <collision side-impulse="0"/>

    <!-- Kart-specific rubber band handling: max-length is the
         maximum length of rubber band before it snaps. force is
         the force a plunger/rubber band applies to the kart(s).
         duration is the duration a rubber band acts. -->
    <rubber-band max-length="50" force="1500" duration="1"/>

    <!-- Kart-specific explosion parameters. Height: how high this
         this kart is being pushed in the sky by an explosion.
         Time: how long it takes before the kart can drive again.  -->
    <explosion time="2" radius="5" />
    <!-- Kart-specific settings used by the AI.
         steering-variation: make each kart steer towards slightly
         different driveline points, so that AI don't create trains.
         Maximum value should be 1 (steer towards left/right side 
         of driveline), 0 means exactly towards quad center point.
         Depending on kart id karts will aim at different points.-->
    <ai steering-variation="0.0"  />
    
  </general-kart-defaults>
</config>