Updated the README.md with a KC4UPR note. I will now be creating a kc4upr branch.

changed version number for nextion lcd protocol

README.md

@@ -1,3 +1,12 @@
+#KC4UPR'S NOTE
+----------------------------------------------------------------------------
+This is a fork of the KD8CEC firmware that will be specific to my uBITX V5
+installation.  My intent is to remove unnecessary code, as well as make some
+GPIO changes based on my use of the Nextion LCD.  Specifically, I'd like to 
+eliminate the use of analog I/O for reading the CW keys, and possibly enable
+control of accessories such as filters using the extra GPIO pins that are
+now available.
+
 #NOTICE
 ----------------------------------------------------------------------------
 - Now Release Version 1.20 on my blog (http://www.hamskey.com)

ubitx_20/ubitx.h

@@ -23,16 +23,16 @@
 // Compile Option
 //==============================================================================
 //Ubitx Board Version
-#define UBITX_BOARD_VERSION 5           //v1 ~ v4 : 4, v5: 5
+#define UBITX_BOARD_VERSION 2           //v1 ~ v4 : 4, v5: 5
 
 //Depending on the type of LCD mounted on the uBITX, uncomment one of the options below.
 //You must select only one.
-#define UBITX_DISPLAY_LCD1602P        //LCD mounted on unmodified uBITX (Parallel)
+//#define UBITX_DISPLAY_LCD1602P        //LCD mounted on unmodified uBITX (Parallel)
 //#define UBITX_DISPLAY_LCD1602I        //I2C type 16 x 02 LCD
 //#define UBITX_DISPLAY_LCD1602I_DUAL   //I2C type 16 x02 LCD Dual
 //#define UBITX_DISPLAY_LCD2004P        //24 x 04 LCD (Parallel)
 //#define UBITX_DISPLAY_LCD2004I        //I2C type 24 x 04 LCD
-//#define UBITX_DISPLAY_NEXTION         //NEXTION LCD
+#define UBITX_DISPLAY_NEXTION         //NEXTION LCD
 
 //#define UBITX_DISPLAY_NEXTION_SAFE      //Only EEProm Write 770~775
 #define I2C_LCD_MASTER_ADDRESS_DEFAULT  0x27     //0x27  //DEFAULT, if Set I2C Address by uBITX Manager, read from EEProm

ubitx_20/ubitx_lcd_nextion.ino

@@ -1041,7 +1041,7 @@ void SendUbitxData(void)
   EEPROM.get(EXTERNAL_DEVICE_OPT1, nextionDisplayOption); 
   SendCommandUL(CMD_DISP_OPTION2, nextionDisplayOption);
 
-  SendCommandStr(CMD_VERSION, (char *)("+v1.122")); //Version
+  SendCommandStr(CMD_VERSION, (char *)("+v1.200")); //Version
   SendEEPromData(CMD_CALLSIGN, 0, userCallsignLength -1, 0);
 
   /*