Change Version Number

ubitx_20/cat_libs.ino

@@ -109,7 +109,8 @@ void CatSetFreq(byte fromType)
 //#define BCD_LEN 9
 //PROTOCOL : 0x03
 //Computer <-(frequency)-> TRCV CAT_BUFF
-void CatGetFreqMode(unsigned long freq, byte fromType)
+//void CatGetFreqMode(unsigned long freq, byte fromType)
+void CatGetFreqMode(unsigned long freq) //for remove warning messages
 {
   int i;
   byte tmpValue;
@@ -149,15 +150,21 @@ void CatGetFreqMode(unsigned long freq, byte fromType)
   SendCatData(5);
 }
 
-void CatSetSplit(boolean isSplit, byte fromType)
+//void CatSetSplit(boolean isSplit, byte fromType)
+void CatSetSplit(boolean isSplit) //for remove warning messages
 {
-
+  if (isSplit)
+    splitOn = 1;
+  else
+    splitOn = 0;
+    
   Serial.write(ACK);
 }
 
 void CatSetPTT(boolean isPTTOn, byte fromType)
 {
-  if (fromType == 2 || fromType == 3) {
+  //
+  if ((!inTx) && (fromType == 2 || fromType == 3)) {
     Serial.write(ACK);  
     return;  
   }
@@ -193,7 +200,7 @@ void CatSetPTT(boolean isPTTOn, byte fromType)
 void CatVFOToggle(boolean isSendACK, byte fromType)
 {
   if (fromType != 2 && fromType != 3) {
-    menuVfoToggle(1, 0);
+    menuVfoToggle(1);
   }  
 
   if (isSendACK)
@@ -232,7 +239,8 @@ void CatSetMode(byte tmpMode, byte fromType)
 }
 
 //Read EEProm by uBITX Manager Software
-void ReadEEPRom(byte fromType)
+//void ReadEEPRom(byte fromType)
+void ReadEEPRom() //for remove warnings.
 {
   //5BYTES
   //CAT_BUFF[0] [1] [2] [3] [4] //4 COMMAND
@@ -255,7 +263,8 @@ void ReadEEPRom(byte fromType)
 }
 
 //Write just proecess 1byes
-void WriteEEPRom(byte fromType)
+//void WriteEEPRom(byte fromType)
+void WriteEEPRom(void)  //for remove warning
 {
   //5BYTES
   uint16_t eepromStartIndex = CAT_BUFF[0] + CAT_BUFF[1] * 256;
@@ -275,7 +284,8 @@ void WriteEEPRom(byte fromType)
   }
 }
 
-void ReadEEPRom_FT817(byte fromType)
+//void ReadEEPRom_FT817(byte fromType)
+void ReadEEPRom_FT817(void) //for remove warnings
 {
   byte temp0 = CAT_BUFF[0];
   byte temp1 = CAT_BUFF[1];
@@ -601,7 +611,8 @@ void WriteEEPRom_FT817(byte fromType)
   Serial.write(ACK);
 }
 
-void CatRxStatus(byte fromType) 
+//void CatRxStatus(byte fromType) 
+void CatRxStatus(void)  //for remove warning
 {
   byte sMeterValue = 1;
 
@@ -621,7 +632,8 @@ void CatRxStatus(byte fromType)
 }
 
 
-void CatTxStatus(byte fromType)
+//void CatTxStatus(byte fromType)
+void CatTxStatus(void)  //for remove warning
 {
   boolean isHighSWR = false;
   boolean isSplitOn = false;
@@ -722,11 +734,11 @@ void Check_Cat(byte fromType)
       
     case 0x02 : //Split On
     case 0x82:  //Split Off
-      CatSetSplit(CAT_BUFF[4] == 0x02, fromType);
+      CatSetSplit(CAT_BUFF[4] == 0x02);
       break;
 
     case 0x03 :   //Read Frequency and mode
-      CatGetFreqMode(frequency, fromType);
+      CatGetFreqMode(frequency);
       break;
 
     case 0x07 :   //Set Operating  Mode
@@ -743,24 +755,24 @@ void Check_Cat(byte fromType)
       break;
 
     case 0xDB:  //Read uBITX EEPROM Data
-      ReadEEPRom(fromType); //Call by uBITX Manager Program
+      ReadEEPRom(); //Call by uBITX Manager Program
       break;
     case 0xBB:  //Read FT-817 EEPROM Data  (for comfirtable)
-      ReadEEPRom_FT817(fromType);
+      ReadEEPRom_FT817();
       break;
 
     case 0xDC:  //Write uBITX EEPROM Data
-      WriteEEPRom(fromType); //Call by uBITX Manager Program
+      WriteEEPRom(); //Call by uBITX Manager Program
       break;
     case 0xBC:  //Write FT-817 EEPROM Data  (for comfirtable)
       WriteEEPRom_FT817(fromType);
       break;
 
     case 0xE7 :       //Read RX Status
-      CatRxStatus(fromType);
+      CatRxStatus();
       break;
     case 0xF7:      //Read TX Status
-      CatTxStatus(fromType);
+      CatTxStatus();
       break;
     default:
     /*

ubitx_20/ubitx_20.ino

@@ -156,10 +156,10 @@ int count = 0;          //to generally count ticks, loops, etc
 #define VFO_B_MODE 257
 #define CW_DELAY 258
 #define CW_START 259
-#define HAM_BAND_COUNT 260  //
-#define TX_TUNE_TYPE 261  //
-#define HAM_BAND_RANGE 262 //FROM (2BYTE) TO (2BYTE) * 10 = 40byte
-#define HAM_BAND_FREQS 302 //40, 1 BAND = 4Byte most bit is mode
+#define HAM_BAND_COUNT 260    //
+#define TX_TUNE_TYPE 261      //
+#define HAM_BAND_RANGE 262    //FROM (2BYTE) TO (2BYTE) * 10 = 40byte
+#define HAM_BAND_FREQS 302    //40, 1 BAND = 4Byte most bit is mode
 #define TUNING_STEP    342   //TUNING STEP * 6 (index 1 + STEPS 5)  //1STEP : 
   
 
@@ -176,6 +176,10 @@ int count = 0;          //to generally count ticks, loops, etc
 #define CW_ADC_BOTH_FROM 356   //CW ADC Range BOTH from         (Lower 8 bit)
 #define CW_ADC_BOTH_TO   357   //CW ADC Range BOTH to           (Lower 8 bit)
 #define CW_KEY_TYPE      358
+#define CW_DISPLAY_SHIFT 359  //Transmits on CWL, CWU Mode, LCD Frequency shifts Sidetone Frequency. 
+                              //(7:Enable / Disable //0: enable, 1:disable, (default is applied shift)
+                              //6 : 0 : Adjust Pulus, 1 : Adjust Minus
+                              //0~5: Adjust Value : * 10 = Adjust Value (0~300)
 
 #define DISPLAY_OPTION1  361   //Display Option1
 #define DISPLAY_OPTION2  362   //Display Option2
@@ -285,6 +289,9 @@ bool Iambic_Key = true;
 #define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
 unsigned char keyerControl = IAMBICB;
 
+byte isShiftDisplayCWFreq = 1;  //Display Frequency 
+int shiftDisplayAdjustVal = 0;  //
+
 //Variables for auto cw mode
 byte isCWAutoMode = 0;          //0 : none, 1 : CW_AutoMode_Menu_Selection, 2 : CW_AutoMode Sending
 byte cwAutoTextCount = 0;       //cwAutoText Count
@@ -696,7 +703,6 @@ byte lastMovedirection = 0; //0 : stop, 1 : cw, 2 : ccw
 void doTuningWithThresHold(){
   int s = 0;
   unsigned long prev_freq;
-  long incdecValue = 0;
 
   if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
     (vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02)))
@@ -750,9 +756,11 @@ void doRIT(){
   unsigned long old_freq = frequency;
 
   if (knob < 0)
-    frequency -= 100l;
+    frequency -= (arTuneStep[tuneStepIndex -1]);  //
+    //frequency -= 100l;
   else if (knob > 0)
-    frequency += 100;
+    frequency += (arTuneStep[tuneStepIndex -1]);  //
+    //frequency += 100;
  
   if (old_freq != frequency){
     setFrequency(frequency);
@@ -908,13 +916,13 @@ void initSettings(){
   if ((3 < tuneTXType && tuneTXType < 100) || 103 < tuneTXType || useHamBandCount < 1 || findedValidValueCount < 5)
   {
     tuneTXType = 2;
-    //if empty band Information, auto insert default region 1 frequency range
+    //if empty band Information, auto insert default region 2 frequency range
     //This part is made temporary for people who have difficulty setting up, so can remove it when you run out of memory.
     useHamBandCount = 10;
     hamBandRange[0][0] = 1810; hamBandRange[0][1] = 2000; 
     hamBandRange[1][0] = 3500; hamBandRange[1][1] = 3800; 
     hamBandRange[2][0] = 5351; hamBandRange[2][1] = 5367; 
-    hamBandRange[3][0] = 7000; hamBandRange[3][1] = 7300;   //region 1
+    hamBandRange[3][0] = 7000; hamBandRange[3][1] = 7300;     //region 2
     hamBandRange[4][0] = 10100; hamBandRange[4][1] = 10150; 
     hamBandRange[5][0] = 14000; hamBandRange[5][1] = 14350; 
     hamBandRange[6][0] = 18068; hamBandRange[6][1] = 18168; 
@@ -962,6 +970,22 @@ void initSettings(){
   cwAdcBothFrom = EEPROM.read(CW_ADC_BOTH_FROM) | ((tmpMostBits & 0x30) << 4);
   cwAdcBothTo = EEPROM.read(CW_ADC_BOTH_TO)     | ((tmpMostBits & 0xC0) << 2);
 
+  //Display Type for CW mode
+  isShiftDisplayCWFreq = EEPROM.read(CW_DISPLAY_SHIFT);
+
+  //Adjust CW Mode Freq
+  shiftDisplayAdjustVal = (isShiftDisplayCWFreq & 0x3F) * 10;
+
+  //check Minus
+  if ((isShiftDisplayCWFreq & 0x40) == 0x40)
+    shiftDisplayAdjustVal = shiftDisplayAdjustVal * -1;
+
+ //Shift Display Check (Default : 0)
+  if ((isShiftDisplayCWFreq & 0x80) == 0)  //Enabled
+    isShiftDisplayCWFreq = 1;
+  else    //Disabled
+    isShiftDisplayCWFreq = 0;
+
   //default Value (for original hardware)
   if (cwAdcSTFrom >= cwAdcSTTo)
   {
@@ -1086,7 +1110,7 @@ void setup()
   
   //Serial.begin(9600);
   lcd.begin(16, 2);
-  printLineF(1, F("CECBT v0.35")); 
+  printLineF(1, F("CECBT v1.03")); 
 
   Init_Cat(38400, SERIAL_8N1);
   initMeter(); //not used in this build
@@ -1117,11 +1141,6 @@ void setup()
     factory_alignment();
 }
 
-
-//for debug
-int dbgCnt = 0;
-byte flasher = 0;
-
 //Auto save Frequency and Mode with Protected eeprom life by KD8CEC
 void checkAutoSaveFreqMode()
 {
@@ -1140,18 +1159,8 @@ void checkAutoSaveFreqMode()
     //check time for Frequency auto save
     if (millis() - saveCheckTime > saveIntervalSec * 1000)
     {
-      if (vfoActive == VFO_A)
-      {
-        vfoA = frequency;
-        vfoA_mode = modeToByte();
-        storeFrequencyAndMode(1);
-      }
-      else
-      {
-        vfoB = frequency;
-        vfoB_mode = modeToByte();
-        storeFrequencyAndMode(2);
-      }
+      FrequencyToVFO(1);
+      saveCheckTime = 0;  //for reduce cpu use rate
     }
   }
 }
@@ -1178,11 +1187,11 @@ void loop(){
 
     if (isCWAutoMode == 0 && beforeIdle_ProcessTime < millis() - 250) {
       idle_process();
+      checkAutoSaveFreqMode();  //move here form out scope for reduce cpu use rate
       beforeIdle_ProcessTime = millis();
     }
   } //end of check TX Status
 
   //we check CAT after the encoder as it might put the radio into TX
   Check_Cat(inTx? 1 : 0);
-  checkAutoSaveFreqMode();
 }

ubitx_20/ubitx_idle.ino

@@ -213,16 +213,18 @@ void updateLine2Buffer(char isDirectCall)
 //meterType : 0 = S.Meter, 1 : P.Meter
 void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
 {
-  drawMeter(meterValue);  //call original source code
-  int lineNumber = 0;
-  if ((displayOption1 & 0x01) == 0x01)
-    lineNumber = 1;
+  if (meterType == 0 || meterType == 1 || meterType == 2)
+  {
+    drawMeter(meterValue);  //call original source code
+    int lineNumber = 0;
+    if ((displayOption1 & 0x01) == 0x01)
+      lineNumber = 1;
+    
+    lcd.setCursor(drawPosition, lineNumber);
   
-  lcd.setCursor(drawPosition, lineNumber);
-
-  for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
-    lcd.write(lcdMeter[i]);
-
+    for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
+      lcd.write(lcdMeter[i]);
+  }
 }
 
 byte testValue = 0;

ubitx_20/ubitx_keyer.ino

@@ -90,13 +90,13 @@ void cwKeyUp(){
 #define PDLSWAP 0x08 // 0 for normal, 1 for swap
 #define IAMBICB 0x10 // 0 for Iambic A, 1 for Iambic B
 enum KSTYPE {IDLE, CHK_DIT, CHK_DAH, KEYED_PREP, KEYED, INTER_ELEMENT };
-static long ktimer;
+static unsigned long ktimer;
 unsigned char keyerState = IDLE;
 
 //Below is a test to reduce the keying error. do not delete lines
 //create by KD8CEC for compatible with new CW Logic
 char update_PaddleLatch(byte isUpdateKeyState) {
-  unsigned char tmpKeyerControl;
+  unsigned char tmpKeyerControl = 0;
   int paddle = analogRead(ANALOG_KEYER);
 
   if (paddle >= cwAdcDashFrom && paddle <= cwAdcDashTo)
@@ -126,9 +126,7 @@ char update_PaddleLatch(byte isUpdateKeyState) {
 // modified by KD8CEC
 ******************************************************************************/
 void cwKeyer(void){
-  byte paddle;
   lastPaddle = 0;
-  int dot,dash;
   bool continue_loop = true;
   unsigned tmpKeyControl = 0;
   
@@ -174,6 +172,9 @@ void cwKeyer(void){
           keyerControl &= ~(DIT_L + DAH_L); // clear both paddle latch bits
           keyerState = KEYED; // next state
           if (!inTx){
+            //DelayTime Option
+            delay_background(delayBeforeCWStartTime * 2, 2);
+            
             keyDown = 0;
             cwTimeout = millis() + cwDelayTime * 10;  //+ CW_TIMEOUT;
             startTx(TX_CW, 1);
@@ -206,7 +207,7 @@ void cwKeyer(void){
           break;
       }
   
-      Check_Cat(3);
+      Check_Cat(2);
     } //end of while
   }
   else{
@@ -214,6 +215,9 @@ void cwKeyer(void){
       if (update_PaddleLatch(0) == DIT_L) {
         // if we are here, it is only because the key is pressed
         if (!inTx){
+          //DelayTime Option
+          delay_background(delayBeforeCWStartTime * 2, 2);
+          
           keyDown = 0;
           cwTimeout = millis() + cwDelayTime * 10;  //+ CW_TIMEOUT; 
           startTx(TX_CW, 1);
@@ -231,13 +235,14 @@ void cwKeyer(void){
           keyDown = 0;
           stopTx();
         }
-        if (!cwTimeout)
-          return;
+        //if (!cwTimeout) //removed by KD8CEC
+        //   return;
         // got back to the beginning of the loop, if no further activity happens on straight key
         // we will time out, and return out of this routine 
         //delay(5);
-        delay_background(5, 3);
-        continue;
+        //delay_background(5, 3); //removed by KD8CEC
+        //continue;               //removed by KD8CEC
+        return;                   //Tx stop control by Main Loop
       }
 
       Check_Cat(2);

ubitx_20/ubitx_menu.ino

@@ -64,7 +64,7 @@ void menuBand(int btn){
       btnPressCount = 0;
       if (tuneTXType > 0) { //Just toggle 0 <-> 2, if tuneTXType is 100, 100 -> 0 -> 2
         tuneTXType = 0;
-        printLineF2(F("Full range mode"));
+        printLineF2(F("General mode"));
       }
       else {
         tuneTXType = 2;
@@ -289,18 +289,13 @@ void menuSelectMode(int btn){
 
     beforeMode = selectModeType;
 
-    while(!btnDown() && digitalRead(PTT) == HIGH){
+    while(!btnDown()){
       //Display Mode Name
-      printLineF1(F("LSB USB CWL CWU"));
-      if (selectModeType == 0)
-        printLineF1(F("LSB"));
-      else if (selectModeType == 1)
-        printLineF1(F("USB"));
-      else if (selectModeType == 2)
-        printLineF1(F("CWL"));
-      else if (selectModeType == 3)
-        printLineF1(F("CWU"));
-
+      memset(c, 0, sizeof(c));
+      strcpy(c, " LSB USB CWL CWU");
+      c[selectModeType * 4] = '>';
+      printLine1(c);
+      
       knob = enc_read();
 
       if (knob != 0)
@@ -320,7 +315,8 @@ void menuSelectMode(int btn){
         }
       }
 
-      Check_Cat(0);  //To prevent disconnections
+      //Check_Cat(0);  //To prevent disconnections
+      delay_background(50, 0);
     }
 
     if (beforeMode != selectModeType) {
@@ -362,16 +358,15 @@ void menuCHMemory(int btn, byte isMemoryToVfo){
   int knob = 0;
   int selectChannel = 0;
   byte isDisplayInfo = 1;
-  byte isCancel = 0;
   int moveStep = 0;
   unsigned long resultFreq, tmpFreq = 0;
   byte loadMode = 0;
   
   if (!btn){
     if (isMemoryToVfo == 1)
-      printLine2("Channel To VFO?");
+      printLineF2(F("Channel To VFO?"));
    else 
-      printLine2("VFO To Channel?");
+      printLineF2(F("VFO To Channel?"));
   }
   else {
     delay_background(500, 0);
@@ -472,7 +467,7 @@ void menuCHMemory(int btn, byte isMemoryToVfo){
       else
       {
         //Save current Frequency to Channel (selectChannel)
-        EEPROM.put(CHANNEL_FREQ + 4 * selectChannel, (frequency & 0x1FFFFFFF) | (modeToByte() << 29) );
+        EEPROM.put(CHANNEL_FREQ + 4 * selectChannel, (frequency & 0x1FFFFFFF) | (((unsigned long)modeToByte()) << 29) );
         printLine2("Saved Frequency");
       }
     }
@@ -491,7 +486,7 @@ void menuSetupKeyType(int btn){
         printLineF2(F("Change Key Type?"));
   }
   else {
-    printLineF2(F("Press to set Key"));
+    //printLineF2(F("Press to set Key")); //for reduce usable flash memory
     delay_background(500, 0);
     selectedKeyType = cwKeyType;
     
@@ -539,10 +534,7 @@ void menuSetupKeyType(int btn){
       else
         keyerControl |= IAMBICB;
     }
-
-    //delay_background(2000, 0);
-    //printLine2ClearAndUpdate();
-    //menuOn = 0;
+    
     menuClearExit(1000);
   }
 }
@@ -573,18 +565,11 @@ void menuADCMonitor(int btn){
     adcPinA0 = analogRead(A0);  //A0(BLACK, EncoderA)
     adcPinA1 = analogRead(A1);  //A1(BROWN, EncoderB)
     adcPinA2 = analogRead(A2);  //A2(RED, Function Key)
-    adcPinA3 = analogRead(A3);  //A3(ORANGE, CW Key)
-    adcPinA6 = analogRead(A6);  //A6(BLUE, Ptt)
+    adcPinA3 = analogRead(A3);  //A3(PTT)
+    adcPinA6 = analogRead(A6);  //A6(KEYER)
     adcPinA7 = analogRead(A7);  //A7(VIOLET, Spare)
 
-/*
-  sprintf(c, "%4d %4d %4d", adcPinA0, adcPinA1, adcPinA2);
-  printLine1(c);
-  sprintf(c, "%4d %4d %4d", adcPinA3, adcPinA6, adcPinA7);
-  printLine2(c);
-*/  
-  
-    if (adcPinA6 < 10) {
+    if (adcPinA3 < 50) {
       if (pressKeyTime == 0)
         pressKeyTime = millis();
       else if (pressKeyTime < (millis() - 3000))
@@ -623,13 +608,11 @@ void menuADCMonitor(int btn){
     delay_background(200, 0);
   } //end of while
       
-  //printLine2ClearAndUpdate();
-  //menuOn = 0;
   menuClearExit(0);
 }
 
 //VFO Toggle and save VFO Information, modified by KD8CEC
-void menuVfoToggle(int btn, char isUseDelayTime)
+void menuVfoToggle(int btn)
 {
   if (!btn){
     if (vfoActive == VFO_A)
@@ -649,7 +632,6 @@ void menuVfoToggle(int btn, char isUseDelayTime)
         frequency = vfoA;
         saveCheckFreq = frequency;
         byteToMode(vfoA_mode, 0);
-        //printLineF2(F("Selected VFO A"));
       }
       else {
         //vfoA = frequency;
@@ -665,16 +647,11 @@ void menuVfoToggle(int btn, char isUseDelayTime)
 
       ritDisable();
       setFrequency(frequency);
-
-      //if (isUseDelayTime == 1)        //Found Issue in wsjt-x Linux 32bit 
-      //  delay_background(500, 0);
-
-      //printLine2ClearAndUpdate();
-      //menuOn = 0;
       menuClearExit(0);
   }
 }
 
+//modified for reduce used flash memory by KD8CEC
 void menuRitToggle(int btn){
   if (!btn){
     if (ritOn == 1)
@@ -692,9 +669,7 @@ void menuRitToggle(int btn){
         printLineF2(F("RIT is OFF"));
         ritDisable();
       }
-      //delay_background(500, 0);
-      //printLine2ClearAndUpdate();
-      //menuOn = 0;
+      
       menuClearExit(500);
   }
 }
@@ -764,14 +739,18 @@ void menuSetup(int btn){
     else
       printLineF2(F("Setup Off?"));
   }else {
+    modeCalibrate = ! modeCalibrate;
+    /*
     if (!modeCalibrate){
       modeCalibrate = true;
-      printLineF2(F("Setup:On"));
+      //printLineF2(F("Setup:On"));
     }
     else {
       modeCalibrate = false;
-      printLineF2(F("Setup:Off"));
+      //printLineF2(F("Setup:Off"));
     }
+    */
+    
    //delay_background(2000, 0);
    //printLine2Clear();
    //menuOn = 0;
@@ -802,14 +781,14 @@ void menuCWSpeed(int btn){
      return;
     }
 
-    printLineF1(F("Press to set WPm"));
+    printLineF1(F("Press to set WPM"));
     strcpy(b, "WPM:");
     itoa(wpm,c, 10);
     strcat(b, c);
     printLine2(b);
     delay_background(300, 0);
 
-    while(!btnDown() && digitalRead(PTT) == HIGH){
+    while(!btnDown()){
 
       knob = enc_read();
       if (knob != 0){
@@ -873,8 +852,7 @@ void menuSetupCwDelay(int btn){
     int tmpCWDelay = cwDelayTime * 10;
      
     if (!btn){
-     strcpy(b, "CW TX->RX Delay");
-     printLine2(b);
+      printLineF2(F("CW TX->RX Delay"));
      return;
     }
 
@@ -885,7 +863,7 @@ void menuSetupCwDelay(int btn){
     printLine2(b);
     delay_background(300, 0);
 
-    while(!btnDown() && digitalRead(PTT) == HIGH){
+    while(!btnDown()){
       knob = enc_read();
       if (knob != 0){
         if (tmpCWDelay > 3 && knob < 0)
@@ -919,34 +897,47 @@ void menuSetupCwDelay(int btn){
 
 //CW Time delay by KD8CEC
 void menuSetupTXCWInterval(int btn){
+    char needDisplayInformation = 1;
     int knob = 0;
     int tmpTXCWInterval = delayBeforeCWStartTime * 2;
      
     if (!btn){
-     strcpy(b, "CW Start Delay");
-     printLine2(b);
+      printLineF2(F("CW Start Delay"));
      return;
     }
 
     printLineF1(F("Press, set Delay"));
+    /*
     strcpy(b, "Start Delay:");
     itoa(tmpTXCWInterval,c, 10);
     strcat(b, c);
     printLine2(b);
+    */
     delay_background(300, 0);
 
-    while(!btnDown() && digitalRead(PTT) == HIGH){
+    while(!btnDown()){
+
+      if (needDisplayInformation == 1) {
+        strcpy(b, "Start Delay:");
+        itoa(tmpTXCWInterval,c, 10);
+        strcat(b, c);
+        printLine2(b);
+        needDisplayInformation = 0;
+      }
+      
       knob = enc_read();
       if (knob != 0){
         if (tmpTXCWInterval > 0 && knob < 0)
           tmpTXCWInterval -= 2;
         if (tmpTXCWInterval < 500 && knob > 0)
           tmpTXCWInterval += 2;
-
+        /*
         strcpy(b, "Start Delay:");
         itoa(tmpTXCWInterval,c, 10);
         strcat(b, c);
         printLine2(b);
+        */
+        needDisplayInformation = 1;
       }
       //abort if this button is down
       if (btnDown())
@@ -1158,9 +1149,9 @@ void menuSetupCarrier(int btn){
     knob = enc_read();
 
     if (knob > 0)
-      usbCarrier -= 50;
+      usbCarrier -= 5;
     else if (knob < 0)
-      usbCarrier += 50;
+      usbCarrier += 5;
     else
       continue; //don't update the frequency or the display
       
@@ -1281,8 +1272,6 @@ void menuSetupCwTone(int btn){
       itoa(sideTone, b, 10);
       printLine2(b);
 
-      //delay(100);
-      //Check_Cat(0);  //To prevent disconnections
       delay_background(100, 0);
     }
     noTone(CW_TONE);
@@ -1308,20 +1297,23 @@ void setDialLock(byte tmpLock, byte fromMode) {
     isDialLock &= ~(vfoActive == VFO_A ? 0x01 : 0x02);
     
   if (fromMode == 2 || fromMode == 3) return;
-  
+
+  //for reduce using flash memory
+  /*
   if (tmpLock == 1)
     printLineF2(F("Dial Lock ON"));
   else
     printLineF2(F("Dial Lock OFF"));
+  */
 
   delay_background(1000, 0);
   printLine2ClearAndUpdate();
 }
 
-unsigned int btnDownTimeCount;
+byte btnDownTimeCount;
 
-#define PRESS_ADJUST_TUNE 1000
-#define PRESS_LOCK_CONTROL 2000
+#define PRESS_ADJUST_TUNE 20 //1000msec 20 * 50 = 1000milisec
+#define PRESS_LOCK_CONTROL 40 //2000msec 40 * 50 = 2000milisec
 
 //Modified by KD8CEC
 void doMenu(){
@@ -1335,14 +1327,12 @@ void doMenu(){
 
   //Appened Lines by KD8CEC for Adjust Tune step and Set Dial lock
   while(btnDown()){
-    //delay(50);
-    //Check_Cat(0);  //To prevent disconnections
     delay_background(50, 0);
     
-    if (btnDownTimeCount++ == (PRESS_ADJUST_TUNE / 50)) { //Set Tune Step 
+    if (btnDownTimeCount++ == (PRESS_ADJUST_TUNE)) { //Set Tune Step 
       printLineF2(F("Set Tune Step?"));
     }
-    else if (btnDownTimeCount > (PRESS_LOCK_CONTROL / 50)) {  //check long time Down Button -> 2.5 Second => Lock
+    else if (btnDownTimeCount > (PRESS_LOCK_CONTROL)) {  //check long time Down Button -> 2.5 Second => Lock
       if (vfoActive == VFO_A)
         setDialLock((isDialLock & 0x01) == 0x01 ? 0 : 1, 0); //Reverse Dial lock
       else
@@ -1353,12 +1343,12 @@ void doMenu(){
   delay(50);  //debounce
 
   //ADJUST TUNE STEP 
-  if (btnDownTimeCount > (PRESS_ADJUST_TUNE / 50))
+  if (btnDownTimeCount > PRESS_ADJUST_TUNE)
   {
-    printLineF1(F("Press to set step"));
+    printLineF1(F("Press to set"));
     isNeedDisplay = 1; //check to need display for display current value
     
-    while (digitalRead(PTT) == HIGH && !btnDown())
+    while (!btnDown())
     {
       //Check_Cat(0);  //To prevent disconnections
       //delay(50);  //debounce    
@@ -1392,7 +1382,7 @@ void doMenu(){
       }
     } //end of while
 
-    printLineF2(F("Changed Step!"));
+    //printLineF2(F("Changed Step!")); //remarked for reduce program memory by KD8CEC
     //SAVE EEPROM
     EEPROM.put(TUNING_STEP, tuneStepIndex);
     delay_background(500, 0);
@@ -1422,7 +1412,7 @@ void doMenu(){
     else if (select < 10)
       menuBand(btnState);
     else if (select < 20)
-      menuVfoToggle(btnState, 1);
+      menuVfoToggle(btnState);
     else if (select < 30)
       menuSelectMode(btnState);
     else if (select < 40)

ubitx_20/ubitx_ui.ino

@@ -99,8 +99,6 @@ void initMeter(){
 //0 ~ 25 : 30 over : + 10
 void drawMeter(int needle) {
   //5Char + O over
-  int drawCharLength = needle / 5;
-  int drawCharLengthLast = needle % 5;
   int i;
 
   for (i = 0; i < 5; i++) {
@@ -283,6 +281,15 @@ void updateDisplay() {
       strcat(c, "B:");
   }
 
+  //Fixed by Mitani Massaru (JE4SMQ)
+  if (isShiftDisplayCWFreq == 1)
+  {
+    if (cwMode == 1)        //CWL
+        tmpFreq = tmpFreq - sideTone + shiftDisplayAdjustVal;
+    else if (cwMode == 2)   //CWU
+        tmpFreq = tmpFreq + sideTone + shiftDisplayAdjustVal;
+  }
+
   //display frequency
   for (int i = 15; i >= 6; i--) {
     if (tmpFreq > 0) {