Merge pull request #9 from phdlee/version0.28

change delaytimes via cat

README.md

@@ -1,11 +1,67 @@
+#IMPORTANT INFORMATION
+----------------------------------------------------------------------------
+- Beta 0.26 and Beta 0.261, Beta 0.262, Beta 0.27 is complete test
+- You can download and use it.
+
+#NOTICE
+----------------------------------------------------------------------------
+I received uBITX a month ago and found that many features are required, and began coding with the idea of implementing minimal functionality as a general hf transceiver rather than an experimental device.
+
+- fixed bugs...
+- Diallock for uBITX's sensitive encoders
+- built in softare Memory keyer and cw options control for CW communication
+- Implementation of CAT communication protocol for Digital Communication (as FT8, JT65, etc)
+- Delay Options for external Linear.
+- and more...
+
+Most of the basic functions of the HF transceiver I thought were implemented.
+The minimum basic specification for uBITX to operate as a radio, I think it is finished.
+So I will release the 0.27 version and if I do not see the bug anymore, I will try to change the version name to 1.0.
+Now uBITX is an HF radio and will be able to join you in your happy hams life.
+Based on this source, you can use it by adding functions.
+
+I am going to do a new project based on this source, linking with WSPR, WSJT-X and so on.
+Of course, this repository is still running. If you have any bugs or ideas, please feel free to email me.
+
+http://www.hamskey.com
+
+DE KD8CEC
+kd8cec@gmail.com
+
 #uBITX
 uBITX firmware, written for the Raduino/Arduino control of uBITX transceivers
 This project is based on https://github.com/afarhan/ubitx and all copyright is inherited.
 The copyright information of the original is below.
 
 KD8CEC
+----------------------------------------------------------------------------
+Prepared or finished tasks for the next version
+  - Most of them are implemented and included in version 0.27.
+  - User Interface on LCD -> Option by user (not need)
+  - Include WSPR Beacone function - (implement other new repository)
+    complete experiment
+    need solve : Big code size (over 100%, then remove some functions for experment)
+                 need replace Si5351 Library (increase risk and need more beta tester)
+                 W3PM sent me his wonderful source - using BITX, GPS 
+                  
 ----------------------------------------------------------------------------
 ## REVISION RECORD
+0.27 
+   (First alpha test version, This will be renamed to the major version 1.0)
+ - Dual VFO Dial Lock (vfoA Dial lock)
+ - Support Ham band on uBITX
+   default Hamband is regeion1 but customize by uBITX Manager Software
+ - Advanced ham band options (Tx control) for use in all countries. You can adjust it yourself.   
+ - Convenience of band movement
+
+0.26
+  - only Beta tester released & source code share
+  - find a bug on none initial eeprom uBITX - Fixed (Check -> initialized & compatible original source code)
+  - change the version number 0.26 -> 0.27
+  - Prevent overflow bugs
+  - bug with linux based Hamlib (raspberry pi), It was perfect for the 0.224 version, but there was a problem for the 0.25 version.  
+    On Windows, ham deluxe, wsjt-x, jt65-hf, and fldigi were successfully run. Problem with Raspberry pi.
+
 0.25
   - Beta Version Released
     http://www.hamskey.com/2018/01/release-beta-version-of-cat-support.html

ubitx_20/cat_libs.ino

@@ -181,7 +181,7 @@ void CatSetPTT(boolean isPTTOn, byte fromType)
 void CatVFOToggle(boolean isSendACK, byte fromType)
 {
   if (fromType != 2 && fromType != 3) {
-    menuVfoToggle(1);
+    menuVfoToggle(1, 0);
   }  
 
   if (isSendACK)
@@ -470,8 +470,8 @@ void WriteEEPRom_FT817(byte fromType)
         sideTone = (sideTonePitch * 50 + 300) + sideToneSub;
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
-        delay(500);
-        printLine2("");
+        delay(300);                       //If timeout errors occur in the calling software, remove them
+        printLine2("");                   //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
       }
       break;
 
@@ -482,8 +482,8 @@ void WriteEEPRom_FT817(byte fromType)
         sideTone = (sideTonePitch * 50 + 300) + sideToneSub;
         printLineF2(F("Sidetone set! CAT"));
         EEPROM.put(CW_SIDETONE, sideTone);
-        delay(500);
-        printLine2("");
+        delay(300);                   //If timeout errors occur in the calling software, remove them
+        printLine2("");               //Ham radio deluxe is the only one that supports this feature yet. and ham radio deluxe has wait time as greater than 500ms
       }
       break;
 
@@ -502,7 +502,7 @@ void WriteEEPRom_FT817(byte fromType)
       cwDelayTime = CAT_BUFF[2];
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_DELAY, cwDelayTime);
-      delay(500);
+      delay(300);
       printLine2("");
       break;
     case 0x62 : //
@@ -511,7 +511,7 @@ void WriteEEPRom_FT817(byte fromType)
       cwSpeed = 1200 / ((CAT_BUFF[2] & 0x3F) + 4);
       printLineF2(F("CW Speed set!"));
       EEPROM.put(CW_SPEED, cwSpeed);
-      delay(500);
+      delay(300);
       printLine2("");
 
       break;
@@ -648,7 +648,6 @@ void Check_Cat(byte fromType)
       rxBufferCheckCount = Serial.available();
       rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT;  //Set time for timeout
     }
-    
     return;
   }
 

ubitx_20/ubitx_20.ino

@@ -148,8 +148,13 @@ int count = 0;          //to generally count ticks, loops, etc
 #define VFO_B_MODE 257
 #define CW_DELAY 258
 #define CW_START 259
+#define HAM_BAND_COUNT 260  //
+#define TX_TUNE_TYPE 261  //
+#define HAM_BAND_RANGE 262 //FROM (2BYTE) TO (2BYTE) * 10 = 40byte
+#define HAM_BAND_FREQS 302 //40, 1 BAND = 4Byte most bit is mode
 
-//
+//Check Firmware type and version
+#define FIRMWAR_ID_ADDR 776 //776 : 0x59, 777 :0x58, 778 : 0x68 : Id Number, if not found id, erase eeprom(32~1023) for prevent system error.
 #define VERSION_ADDRESS 779   //check Firmware version
 //USER INFORMATION
 #define USER_CALLSIGN_KEY 780   //0x59
@@ -228,8 +233,9 @@ byte sideTonePitch=0;
 byte sideToneSub = 0;
 
 //DialLock
-byte isDialLock = 0;
-byte isTxOff = 0;
+byte isDialLock = 0;  //000000[0]vfoB [0]vfoA 0Bit : A, 1Bit : B
+byte isTxType = 0;    //000000[0 - isSplit] [0 - isTXStop]
+
 
 //Variables for auto cw mode
 byte isCWAutoMode = 0;          //0 : none, 1 : CW_AutoMode_Menu_Selection, 2 : CW_AutoMode Sending
@@ -264,6 +270,69 @@ boolean modeCalibrate = false;//this mode of menus shows extended menus to calib
  * you start hacking around
  */
 
+//Ham Band
+#define MAX_LIMIT_RANGE 10  //because limited eeprom size
+byte useHamBandCount = 0;  //0 use full range frequency
+byte tuneTXType = 0;      //0 : use full range, 1 : just Change Dial speed, 2 : just ham band change, but can general band by tune, 3 : only ham band (just support 0, 2 (0.26 version))
+                          //100 : use full range but not TX on general band, 101 : just change dial speed but.. 2 : jut... but.. 3 : only ham band  (just support 100, 102 (0.26 version))
+unsigned int hamBandRange[MAX_LIMIT_RANGE][2];  // =  //Khz because reduce use memory
+
+//-1 : not found, 0 ~ 9 : Hamband index
+char getIndexHambanBbyFreq(unsigned long f)
+{
+  f = f / 1000;
+  for (byte i = 0; i < useHamBandCount; i++)
+    if (hamBandRange[i][0] <= f && f < hamBandRange[i][1])
+      return i;
+      
+  return -1;
+}
+
+//when Band change step = just hamband
+//moveDirection : 1 = next, -1 : prior
+void setNextHamBandFreq(unsigned long f, char moveDirection)
+{
+  unsigned long resultFreq = 0;
+  byte loadMode = 0;
+  char findedIndex = getIndexHambanBbyFreq(f);
+
+  if (findedIndex == -1) {  //out of hamband
+    f = f / 1000;
+    for (byte i = 0; i < useHamBandCount -1; i++) {
+      if (hamBandRange[i][1] <= f && f < hamBandRange[i + 1][0]) {
+        findedIndex = i + moveDirection;
+        //return (unsigned long)(hamBandRange[i + 1][0]) * 1000;
+      }
+    } //end of for
+  }
+  else if (((moveDirection == 1) && (findedIndex < useHamBandCount -1)) ||  //Next
+    ((moveDirection == -1) && (findedIndex > 0)) ) {                        //Prior
+    findedIndex += moveDirection;
+  }
+  else
+    findedIndex = -1;
+    
+  if (findedIndex == -1)
+    findedIndex = (moveDirection == 1 ? 0 : useHamBandCount -1);
+
+  EEPROM.get(HAM_BAND_FREQS + 4 * findedIndex, resultFreq);
+  
+  loadMode = (byte)(resultFreq >> 30);
+  resultFreq = resultFreq & 0x3FFFFFFF;
+  
+  if ((resultFreq / 1000) < hamBandRange[findedIndex][0] || (resultFreq / 1000) > hamBandRange[findedIndex][1])
+    resultFreq = (unsigned long)(hamBandRange[findedIndex][0]) * 1000;
+
+  setFrequency(resultFreq);
+  byteWithFreqToMode(loadMode);
+}
+
+void saveBandFreqByIndex(unsigned long f, unsigned long mode, char bandIndex) {
+  if (bandIndex >= 0)
+    EEPROM.put(HAM_BAND_FREQS + 4 * bandIndex, (f & 0x3FFFFFFF) | (mode << 30) );
+}
+
+
 /*
   KD8CEC
   When using the basic delay of the Arduino, the program freezes.
@@ -275,7 +344,7 @@ unsigned long delayBeforeTime = 0;
 byte delay_background(unsigned delayTime, byte fromType){ //fromType : 4 autoCWKey -> Check Paddle
   delayBeforeTime = millis();
 
-  while (millis() <= delayBeforeTime + delayTime) {
+  while (millis() - delayBeforeTime <= delayTime) {
 
     if (fromType == 4)
     {
@@ -381,7 +450,13 @@ void setFrequency(unsigned long f){
 void startTx(byte txMode, byte isDisplayUpdate){
   unsigned long tx_freq = 0;
 
-  if (isTxOff != 1)
+  //Check Hamband only TX //Not found Hamband index by now frequency
+  if (tuneTXType >= 100 && getIndexHambanBbyFreq(ritOn ? ritTxFrequency :  frequency) == -1) {
+    //no message
+    return;
+  }
+
+  if ((isTxType & 0x01) != 0x01)
     digitalWrite(TX_RX, 1);
 
   inTx = 1;
@@ -502,7 +577,8 @@ void doTuning(){
   unsigned long prev_freq;
   int incdecValue = 0;
 
-  if (isDialLock == 1)
+  if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
+    (vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02)))
     return;
 
   if (isCWAutoMode == 0 || cwAutoDialType == 1)
@@ -611,6 +687,7 @@ void storeFrequencyAndMode(byte saveType)
 void initSettings(){
   //read the settings from the eeprom and restore them
   //if the readings are off, then set defaults
+  //for original source Section ===========================
   EEPROM.get(MASTER_CAL, calibration); 
   EEPROM.get(USB_CAL, usbCarrier);
   EEPROM.get(VFO_A, vfoA);
@@ -618,6 +695,30 @@ void initSettings(){
   EEPROM.get(CW_SIDETONE, sideTone);
   EEPROM.get(CW_SPEED, cwSpeed);
 
+  //for custom source Section =============================
+  //ID & Version Check from EEProm 
+  //if found different firmware, erase eeprom (32
+  #define FIRMWAR_ID_ADDR 776 //776 : 0x59, 777 :0x58, 778 : 0x68 : Id Number, if not found id, erase eeprom(32~1023) for prevent system error.
+  if (EEPROM.read(FIRMWAR_ID_ADDR) != 0x59 || 
+    EEPROM.read(FIRMWAR_ID_ADDR + 1) != 0x58 || 
+    EEPROM.read(FIRMWAR_ID_ADDR + 2) != 0x68 ) {
+      
+    printLineF(1, F("Init EEProm...")); 
+      //initial all eeprom 
+    for (unsigned int i = 32; i < 1024; i++) //protect Master_cal, usb_cal
+      EEPROM.write(i, 0);
+
+    //Write Firmware ID
+    EEPROM.write(FIRMWAR_ID_ADDR, 0x59);
+    EEPROM.write(FIRMWAR_ID_ADDR + 1, 0x58);
+    EEPROM.write(FIRMWAR_ID_ADDR + 2, 0x68);
+  }
+  
+  //Version Write for Memory Management Software
+  if (EEPROM.read(VERSION_ADDRESS) != VERSION_NUM)
+    EEPROM.write(VERSION_ADDRESS, VERSION_NUM);
+
+
   //for Save VFO_A_MODE to eeprom
   //0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
   EEPROM.get(VFO_A_MODE, vfoA_mode);
@@ -633,9 +734,22 @@ void initSettings(){
   if (EEPROM.read(USER_CALLSIGN_KEY) == 0x59)
     userCallsignLength = EEPROM.read(USER_CALLSIGN_LEN);  //MAXIMUM 18 LENGTH
 
-  //Version Write for Memory Management Software
-  if (EEPROM.read(VERSION_ADDRESS) != VERSION_NUM)
-    EEPROM.write(VERSION_ADDRESS, VERSION_NUM);
+  //Ham Band Count
+  EEPROM.get(HAM_BAND_COUNT, useHamBandCount);
+  EEPROM.get(TX_TUNE_TYPE, tuneTXType);
+
+  
+  if ((3 < tuneTXType && tuneTXType < 100) || 103 < tuneTXType || useHamBandCount < 1)
+    tuneTXType = 0;
+    
+  //Read band Information
+  for (byte i = 0; i < useHamBandCount; i++) {
+    unsigned int tmpReadValue = 0;
+    EEPROM.get(HAM_BAND_RANGE + 4 * i, tmpReadValue);
+    hamBandRange[i][0] = tmpReadValue;
+    EEPROM.get(HAM_BAND_RANGE + 4 * i + 2, tmpReadValue);
+    hamBandRange[i][1] = tmpReadValue;
+  }
   
   if (cwDelayTime < 1 || cwDelayTime > 250)
     cwDelayTime = 60;
@@ -715,28 +829,35 @@ void initPorts(){
 
 void setup()
 {
-  //Init EEProm for Fault EEProm TEST and Factory Reset
   /*
-  for (int i = 0; i < 1024; i++)
-    EEPROM.write(i, 0);
+  //Init EEProm for Fault EEProm TEST and Factory Reset
+  //please remove remark for others.
+  //for (int i = 0; i < 1024; i++)
+  for (int i = 16; i < 1024; i++) //protect Master_cal, usb_cal
+    EEPROM.write(i, 0xFF);
+  lcd.begin(16, 2);
+  printLineF(1, F("Complete Erase")); 
+  sleep(1000);
+  //while(1);
+  //end section of test
   */
+  
   //Serial.begin(9600);
   lcd.begin(16, 2);
+  printLineF(1, F("CECBT v0.27")); 
 
   Init_Cat(38400, SERIAL_8N1);
   initMeter(); //not used in this build
   initSettings();
 
-  printLineF(1, F("CECBT v0.25")); 
-  if (userCallsignLength > 0 && ((userCallsignLength & 0x80) == 0x80))
-  {
+  if (userCallsignLength > 0 && ((userCallsignLength & 0x80) == 0x80)) {
     userCallsignLength = userCallsignLength & 0x7F;
     printLineFromEEPRom(0, 0, 0, userCallsignLength -1); //eeprom to lcd use offset (USER_CALLSIGN_DAT)
+    delay(500);
   }
-  else
-  {
+  else {
     printLineF(0, F("uBITX v0.20")); 
-    delay_background(500, 0);
+    delay(500);
     printLine2(""); 
   }
   
@@ -751,95 +872,6 @@ void setup()
 
   if (btnDown())
     factory_alignment();
-
-/*
-   //This is for auto key test
-  EEPROM.put(CW_AUTO_MAGIC_KEY, 0x73);        //MAGIC KEY
-  EEPROM.put(CW_AUTO_COUNT, 3);               //WORD COUNT
-  EEPROM.put(CW_AUTO_DATA + 0, 6);        // 0 word begin postion / CQCQ TEST K
-  EEPROM.put(CW_AUTO_DATA + 1, 33);       // 0 word end postion / CQCQ TEST K
-  EEPROM.put(CW_AUTO_DATA + 2, 34);       //1 word begin position / LOL LOL
-  EEPROM.put(CW_AUTO_DATA + 3, 40);       //1 word end position / LOL LOL
-  EEPROM.put(CW_AUTO_DATA + 4, 41);       //2 word begin position / /?![]789
-  EEPROM.put(CW_AUTO_DATA + 5, 48);       //2 word end position / /?![]789
-  
-  EEPROM.put(CW_AUTO_DATA + 6, 'C');      //
-  EEPROM.put(CW_AUTO_DATA + 7, 'Q');      //
-  EEPROM.put(CW_AUTO_DATA + 8, 'C');      //
-  EEPROM.put(CW_AUTO_DATA + 9, 'Q');      //
-  EEPROM.put(CW_AUTO_DATA + 10, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 11, 'D');      //
-  EEPROM.put(CW_AUTO_DATA + 12, 'E');      //
-  EEPROM.put(CW_AUTO_DATA + 13, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 14, 'K');      //
-  EEPROM.put(CW_AUTO_DATA + 15, 'D');      //
-  EEPROM.put(CW_AUTO_DATA + 16, '8');      //
-  EEPROM.put(CW_AUTO_DATA + 17, 'C');      //
-  EEPROM.put(CW_AUTO_DATA + 18, 'E');      //
-  EEPROM.put(CW_AUTO_DATA + 19, 'C');      //
-  EEPROM.put(CW_AUTO_DATA + 20, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 21, 'E');      //
-  EEPROM.put(CW_AUTO_DATA + 22, 'M');      //
-  EEPROM.put(CW_AUTO_DATA + 23, '3');      //
-  EEPROM.put(CW_AUTO_DATA + 24, '7');      //
-  EEPROM.put(CW_AUTO_DATA + 25, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 26, 'D');      //
-  EEPROM.put(CW_AUTO_DATA + 27, 'E');      //
-  EEPROM.put(CW_AUTO_DATA + 28, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 29, 'C');      //
-  EEPROM.put(CW_AUTO_DATA + 30, 'E');      //
-  EEPROM.put(CW_AUTO_DATA + 31, 'C');      //
-  EEPROM.put(CW_AUTO_DATA + 32, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 33, 'K');      //
-*/
-
-/*
-  EEPROM.put(CW_AUTO_DATA + 34, '<');      //
-  EEPROM.put(CW_AUTO_DATA + 35, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 36, '>');      //
-  EEPROM.put(CW_AUTO_DATA + 37, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 38, '7');      //
-  EEPROM.put(CW_AUTO_DATA + 39, '3');      //
-  EEPROM.put(CW_AUTO_DATA + 40, 'K');      //
-
-  EEPROM.put(CW_AUTO_DATA + 41, 'C');      //
-  EEPROM.put(CW_AUTO_DATA + 42, 'Q');      //
-  EEPROM.put(CW_AUTO_DATA + 43, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 44, '>');      // start "
-  EEPROM.put(CW_AUTO_DATA + 45, ' ');      // end "
-  EEPROM.put(CW_AUTO_DATA + 46, '>');      //
-  EEPROM.put(CW_AUTO_DATA + 47, ' ');      //
-  EEPROM.put(CW_AUTO_DATA + 48, 'K');      //
-*/
-
-/*
-  //This is for auto key test2
-  //USER CALL SIGN
-  EEPROM.put(USER_CALLSIGN_KEY, 0x59);     //MAGIC KEY
-  //EEPROM.put(USER_CALLSIGN_LEN, 10);           //WORD COUNT
-  EEPROM.put(USER_CALLSIGN_LEN, 10 + 0x80);           //WORD COUNT
-  
-  EEPROM.put(USER_CALLSIGN_DAT + 1, 'K');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 2, 'D');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 3, '8');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 4, 'C');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 5, 'E');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 6, 'C');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 7, '/');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 8, 'A');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 9, 'B');      //
-  EEPROM.put(USER_CALLSIGN_DAT + 10, 'C');      //
-
-  //CW QSO CALLSIGN
-  EEPROM.put(CW_STATION_LEN, 6);                //
-  EEPROM.put(CW_STATION_LEN - 6 + 0 , 'A');     //
-  EEPROM.put(CW_STATION_LEN - 6 + 1 , 'B');     //
-  EEPROM.put(CW_STATION_LEN - 6 + 2 , '1');     //
-  EEPROM.put(CW_STATION_LEN - 6 + 3 , 'C');     //
-  EEPROM.put(CW_STATION_LEN - 6 + 4 , 'D');     //
-  EEPROM.put(CW_STATION_LEN - 6 + 5 , 'E');     // 
-*/
-  
 }
 
 

ubitx_20/ubitx_menu.ino

@@ -15,11 +15,8 @@
 
 int menuBand(int btn){
   int knob = 0;
-  int band;
-  unsigned long offset;
-
- // band = frequency/1000000l;
- // offset = frequency % 1000000l;
+  int stepChangeCount = 0;
+  byte btnPressCount = 0;
 
   if (!btn){
    printLineF2(F("Band Select?"));
@@ -31,6 +28,47 @@ int menuBand(int btn){
   while (btnDown()) {
     delay(50);
     Check_Cat(0);  //To prevent disconnections
+    if (btnPressCount++ > 20) {
+      btnPressCount = 0;
+      if (tuneTXType > 0) { //Just toggle 0 <-> 2, if tuneTXType is 100, 100 -> 0 -> 2
+        tuneTXType = 0;
+        printLineF2(F("Full range mode"));
+      }
+      else {
+        tuneTXType = 2;
+        //if empty band Information, auto insert default region 1 frequency range
+        //This part is made temporary for people who have difficulty setting up, so can remove it when you run out of memory.
+        if (useHamBandCount < 1) {
+          useHamBandCount = 10;
+          hamBandRange[0][0] = 1810; hamBandRange[0][1] = 2000; 
+          hamBandRange[1][0] = 3500; hamBandRange[1][1] = 3800; 
+          hamBandRange[2][0] = 5351; hamBandRange[2][1] = 5367; 
+          hamBandRange[3][0] = 7000; hamBandRange[3][1] = 7200; 
+          hamBandRange[4][0] = 10100; hamBandRange[4][1] = 10150; 
+          hamBandRange[5][0] = 14000; hamBandRange[5][1] = 14350; 
+          hamBandRange[6][0] = 18068; hamBandRange[6][1] = 18168; 
+          hamBandRange[7][0] = 21000; hamBandRange[7][1] = 21450; 
+          hamBandRange[8][0] = 24890; hamBandRange[8][1] = 24990; 
+          hamBandRange[9][0] = 28000; hamBandRange[9][1] = 29700; 
+        }
+        printLineF2(F("Ham band mode"));
+      }
+      delay_background(1000, 0);
+      printLine2ClearAndUpdate();
+      printLineF2(F("Press to confirm"));
+    }
+  }
+  
+  char currentBandIndex = -1;
+  //Save Band Information
+  if (tuneTXType == 2 || tuneTXType == 3 || tuneTXType == 102 || tuneTXType == 103) { //only ham band move
+    //Get Now Band Index
+    currentBandIndex = getIndexHambanBbyFreq(frequency);
+    
+    if (currentBandIndex >= 0) {
+      //Save Frequency to Band Frequncy Record
+      saveBandFreqByIndex(frequency, modeToByte(), currentBandIndex);
+    }
   }
   
   delay(50);    
@@ -50,16 +88,35 @@ int menuBand(int btn){
       else
         isUSB = false;
       setFrequency(((unsigned long)band * 1000000l) + offset); */
+      if (tuneTXType == 2 || tuneTXType == 3 || tuneTXType == 102 || tuneTXType == 103) { //only ham band move
+        if (knob < 0) {
+          if (stepChangeCount-- < -3) {
+            setNextHamBandFreq(frequency, -1);  //Prior Band
+            stepChangeCount = 0;
+          }
+        }
+        else if (knob > 0) {
+          if (stepChangeCount++ > 3) {
+            setNextHamBandFreq(frequency, 1); //Next Band
+            stepChangeCount = 0;
+          }
+        }
+      }
+      else {  //original source
         if (knob < 0 && frequency > 3000000l)
           setFrequency(frequency - 200000l);
         if (knob > 0 && frequency < 30000000l)
           setFrequency(frequency + 200000l);
+
         if (frequency > 10000000l)
           isUSB = true;
         else
           isUSB = false;
+      }
+
       updateDisplay();
     }
+    
     delay(20);
     Check_Cat(0);  //To prevent disconnections
   }
@@ -89,8 +146,16 @@ void byteToMode(byte modeValue){
   else
     isUSB = 0;
 }
+void byteWithFreqToMode(byte modeValue){
+  if (modeValue == 3)
+    isUSB = 1;
+  else if (modeValue == 0)  //Not Set
+    isUSB = (frequency > 10000000l) ? true : false;
+  else
+    isUSB = 0;
+}
 
-void menuVfoToggle(int btn)
+void menuVfoToggle(int btn, char isUseDelayTime)
 {
   if (!btn){
     if (vfoActive == VFO_A)
@@ -124,8 +189,9 @@ void menuVfoToggle(int btn)
 
       ritDisable();
 
-      //updateDisplay();
+      if (isUseDelayTime == 1)        //Found Issue in wsjt-x Linux 32bit 
         delay_background(500, 0);
+        
       printLine2ClearAndUpdate();
       //exit the menu
       menuOn = 0;
@@ -178,20 +244,20 @@ void menuSidebandToggle(int btn){
   }
 }
 
-void menuTxOnOff(int btn){
+void menuTxOnOff(int btn, byte optionType){
   if (!btn){
-    if (isTxOff == 0)
+    if ((isTxType & optionType) == 0)
       printLineF2(F("TX OFF?"));
     else
       printLineF2(F("TX ON?"));
   }
   else {
-      if (isTxOff == 0){
-        isTxOff = 1;
+      if ((isTxType & optionType) == 0){
+        isTxType |= optionType;
         printLineF2(F("TX OFF!"));
       }
       else {
-        isTxOff = 0;
+        isTxType &= ~(optionType);
         printLineF2(F("TX ON!"));
       }
     delay_background(500, 0);
@@ -677,11 +743,14 @@ void menuSetupCwTone(int btn){
  }
 
 void setDialLock(byte tmpLock, byte fromMode) {
-  isDialLock = tmpLock;
+  if (tmpLock == 1)
+    isDialLock |= (vfoActive == VFO_A ? 0x01 : 0x02);
+  else
+    isDialLock &= ~(vfoActive == VFO_A ? 0x01 : 0x02);
     
   if (fromMode == 2 || fromMode == 3) return;
   
-  if (isDialLock == 1)
+  if (tmpLock == 1)
     printLineF2(F("Dial Lock ON"));
   else
     printLineF2(F("Dial Lock OFF"));
@@ -706,7 +775,10 @@ void doMenu(){
     //btnDownTimeCount++;
     //check long time Down Button -> 3 Second
     if (btnDownTimeCount++ > (2000 / 50)) {
-      setDialLock(isDialLock == 1 ? 0 : 1, 0); //Reverse Dialo lock
+      if (vfoActive == VFO_A)
+        setDialLock((isDialLock & 0x01) == 0x01 ? 0 : 1, 0); //Reverse Dial lock
+      else
+        setDialLock((isDialLock & 0x02) == 0x02 ? 0 : 1, 0); //Reverse Dial lock
       return;
     }
   }
@@ -732,7 +804,7 @@ void doMenu(){
     else if (select < 20)
       menuRitToggle(btnState);
     else if (select < 30)
-      menuVfoToggle(btnState);
+      menuVfoToggle(btnState, 1);
     else if (select < 40)
       menuSidebandToggle(btnState);
     else if (select < 50)
@@ -754,7 +826,7 @@ void doMenu(){
     else if (select < 130 && modeCalibrate)
       menuSetupTXCWInterval(btnState);
     else if (select < 140 && modeCalibrate)
-      menuTxOnOff(btnState);
+      menuTxOnOff(btnState, 0x01);      //TX OFF / ON
     else if (select < 150 && modeCalibrate)
       menuExit(btnState);
 

ubitx_20/ubitx_ui.ino

@@ -251,7 +251,8 @@ void updateDisplay() {
   //  strcat(c, " TX");
   printLine(1, c);
 
-  if (isDialLock == 1) {
+  if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
+    (vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
     lcd.setCursor(5,1);
     lcd.write((uint8_t)0);
   }