Added IF Tune, ATT, SDR Functions

This commit is contained in:
phdlee 2018-04-06 21:43:36 +09:00
parent d4ed0589e5
commit 23f1b7cd5c
3 changed files with 134 additions and 35 deletions

View File

@ -5,11 +5,12 @@
//Depending on the type of LCD mounted on the uBITX, uncomment one of the options below. //Depending on the type of LCD mounted on the uBITX, uncomment one of the options below.
//You must select only one. //You must select only one.
//#define UBITX_DISPLAY_LCD1602P //LCD mounted on unmodified uBITX #define UBITX_DISPLAY_LCD1602P //LCD mounted on unmodified uBITX
#define UBITX_DISPLAY_LCD1602I //I2C type 16 x 02 LCD //#define UBITX_DISPLAY_LCD1602I //I2C type 16 x 02 LCD
//#define UBITX_DISPLAY_LCD2404P //24 x 04 LCD //#define UBITX_DISPLAY_LCD2404P //24 x 04 LCD
//#define UBITX_DISPLAY_LCD2404I //I2C type 24 x 04 LCD //#define UBITX_DISPLAY_LCD2404I //I2C type 24 x 04 LCD
//#define ENABLE_FACTORYALIGN
/** /**
@ -326,6 +327,11 @@ unsigned char txFilter = 0; //which of the four transmit filters are in use
boolean modeCalibrate = false;//this mode of menus shows extended menus to calibrate the oscillators and choose the proper boolean modeCalibrate = false;//this mode of menus shows extended menus to calibrate the oscillators and choose the proper
//beat frequency //beat frequency
byte attLevel = 0; //ATT : RF Gain Control (Receive) <-- IF1 Shift, 0 : Off, ShiftValue is attLevel * 100; attLevel 150 = 15K
char if1TuneValue = 0; //0 : OFF, IF1 + if1TuneValue * 100; // + - 12500;
byte sdrModeOn = 0; //SDR MODE ON / OFF
unsigned long SDR_Center_Freq = 32000000;
unsigned long beforeIdle_ProcessTime = 0; //for check Idle time unsigned long beforeIdle_ProcessTime = 0; //for check Idle time
byte line2DisplayStatus = 0; //0:Clear, 1 : menu, 1: DisplayFrom Idle, byte line2DisplayStatus = 0; //0:Clear, 1 : menu, 1: DisplayFrom Idle,
char lcdMeter[17]; char lcdMeter[17];
@ -495,7 +501,32 @@ void setFrequency(unsigned long f){
setTXFilters(f); setTXFilters(f);
unsigned long appliedCarrier = ((cwMode == 0 ? usbCarrier : cwmCarrier) + (isIFShift && (inTx == 0) ? ifShiftValue : 0)); unsigned long appliedCarrier = ((cwMode == 0 ? usbCarrier : cwmCarrier) + (isIFShift && (inTx == 0) ? ifShiftValue : 0));
long if1AdjustValue = ((inTx == 0) ? (attLevel * 200) : 0) + (if1TuneValue * 50); //if1Tune RX, TX Enabled, ATT : only RX Mode
if (sdrModeOn && (inTx == 0)) //IF SDR
{
si5351bx_setfreq(2, 44999500 + if1AdjustValue + f);
si5351bx_setfreq(1, 44999500 + if1AdjustValue + SDR_Center_Freq + 2390);
}
else
{
if (cwMode == 1 || (cwMode == 0 && (!isUSB)))
{
//CWL(cwMode == 1) or LSB (cwMode == 0 && (!isUSB))
si5351bx_setfreq(2, SECOND_OSC_LSB + if1AdjustValue + appliedCarrier + f);
//si5351bx_setfreq(1, SECOND_OSC_LSB + if1AdjustValue - (sdrModeOn ? (SDR_Center_Freq- usbCarrier) : 0));
si5351bx_setfreq(1, SECOND_OSC_LSB + if1AdjustValue);
}
else
{
//CWU (cwMode == 2) or LSB (cwMode == 0 and isUSB)
si5351bx_setfreq(2, SECOND_OSC_USB + if1AdjustValue - appliedCarrier + f);
//si5351bx_setfreq(1, SECOND_OSC_USB + if1AdjustValue + (sdrModeOn ? (SDR_Center_Freq- usbCarrier) : 0)); //Increase LO Frequency => 1198500 -> 32Mhz
si5351bx_setfreq(1, SECOND_OSC_USB + if1AdjustValue); //Increase LO Frequency => 1198500 -> 32Mhz
}
}
/*
if (cwMode == 0) if (cwMode == 0)
{ {
if (isUSB){ if (isUSB){
@ -518,6 +549,7 @@ void setFrequency(unsigned long f){
si5351bx_setfreq(1, SECOND_OSC_USB); si5351bx_setfreq(1, SECOND_OSC_USB);
} }
} }
*/
frequency = f; frequency = f;
} }
@ -1150,8 +1182,10 @@ void setup()
setFrequency(vfoA); setFrequency(vfoA);
updateDisplay(); updateDisplay();
#ifdef ENABLE_FACTORYALIGN
if (btnDown()) if (btnDown())
factory_alignment(); factory_alignment();
#endif
} }
//Auto save Frequency and Mode with Protected eeprom life by KD8CEC //Auto save Frequency and Mode with Protected eeprom life by KD8CEC

View File

@ -441,6 +441,37 @@ void menuTxOnOff(int btn, byte optionType){
} }
} }
//Toggle SDR MODE
void menuSDROnOff(int btn)
{
if (!btn){
if (sdrModeOn == 0)
printLineF2(F("SDR Mode On?"));
else
printLineF2(F("SDR Mode Off?"));
}
else {
if (sdrModeOn == 1){
sdrModeOn = 0;
printLineF2(F("[OFF]"));
}
else {
sdrModeOn = 1;
if (ritOn == 1)
ritOn = 0;
if (splitOn == 1)
splitOn = 0;
printLineF2(F("[ON]"));
}
setFrequency(frequency);
menuClearExit(500);
}
}
void displayEmptyData(void){ void displayEmptyData(void){
printLineF2(F("Empty data")); printLineF2(F("Empty data"));
delay_background(2000, 0); delay_background(2000, 0);
@ -548,9 +579,10 @@ void menuSetupCWCarrier(int btn){
//valueType 0 : Normal //valueType 0 : Normal
// 1 : CW Change -> Generate Tone // 1 : CW Change -> Generate Tone
// 2 : IF Shift Setup -> SetFrequency, Set SideTone // 2 : IF Shift Setup -> SetFrequency, Set SideTone
// 3 : Select Mode (different display type) // 5 : ATT
// 11 : Select Mode (different display type)
//knobSensitivity : 1 ~ //knobSensitivity : 1 ~
int getValueByKnob(int valueType, int targetValue, int minKnobValue, int maxKnobValue, int incStep, char* displayTitle, int knobSensitivity) int getValueByKnob(int valueType, int targetValue, int minKnobValue, int maxKnobValue, int incStep, const char* displayTitle, int knobSensitivity)
{ {
int knob; int knob;
int moveDetectStep = 0; int moveDetectStep = 0;
@ -558,7 +590,7 @@ int getValueByKnob(int valueType, int targetValue, int minKnobValue, int maxKnob
char isInitDisplay = 1; char isInitDisplay = 1;
delay_background(300, 0); //Default Delay delay_background(300, 0); //Default Delay
if (valueType < 3) if (valueType < 10)
{ {
strcpy(b, "Press, set "); strcpy(b, "Press, set ");
strcat(b, displayTitle); strcat(b, displayTitle);
@ -597,7 +629,7 @@ int getValueByKnob(int valueType, int targetValue, int minKnobValue, int maxKnob
strcpy(b, displayTitle); strcpy(b, displayTitle);
if (valueType == 3) //Mode Select if (valueType == 11) //Mode Select
{ {
b[targetValue * 4] = '>'; b[targetValue * 4] = '>';
} }
@ -625,9 +657,13 @@ int getValueByKnob(int valueType, int targetValue, int minKnobValue, int maxKnob
{ {
tone(CW_TONE, targetValue); tone(CW_TONE, targetValue);
} }
else if (valueType == 2) else if (valueType == 2 || valueType == 5 ) // 2:IFS, 5:ATT
{ {
ifShiftValue = targetValue; if (valueType == 2)
ifShiftValue = targetValue;
else
attLevel = targetValue;
setFrequency(frequency); setFrequency(frequency);
SetCarrierFreq(); SetCarrierFreq();
} }
@ -912,6 +948,31 @@ void menuIFSSetup(int btn){
} }
} }
//ATT SETUP (IF1(45MHZ) SHIFT), by KD8CEC
void menuATTSetup(int btn){
int knob = 0;
char needApplyChangeValue = 1;
if (!btn){
if (isIFShift == 1)
printLineF2(F("ATT Change?"));
else
printLineF2(F("ATT On?"));
}
else
{
attLevel = getValueByKnob(5, attLevel, 0, 200, 5, "ATT", 2); //2 : (SetFrequency), targetValue, minKnobValue, maxKnobValue, stepSize
delay_background(500, 0); //for check Long Press function key
if (btnDown() || attLevel == 0)
{
attLevel = 0;
setFrequency(frequency);
//SetCarrierFreq();
}
menuClearExit(0);
}
}
//Functions for CWL and CWU by KD8CEC //Functions for CWL and CWU by KD8CEC
void menuSelectMode(int btn){ void menuSelectMode(int btn){
@ -939,7 +1000,7 @@ void menuSelectMode(int btn){
//delay_background(500, 0); //delay_background(500, 0);
selectModeType = getValueByKnob(3, selectModeType, 0, 3, 1, " LSB USB CWL CWU", 4); //3 : Select Mode, targetValue, minKnobValue, maxKnobValue, stepSize selectModeType = getValueByKnob(11, selectModeType, 0, 3, 1, " LSB USB CWL CWU", 4); //3 : Select Mode, targetValue, minKnobValue, maxKnobValue, stepSize
/* /*
while(!btnDown()){ while(!btnDown()){
@ -1011,8 +1072,8 @@ void menuSetupKeyType(int btn){
//delay_background(500, 0); //delay_background(500, 0);
selectedKeyType = cwKeyType; selectedKeyType = cwKeyType;
//selectedKeyType = getValueByKnob(4, selectedKeyType, 0, 2, 1, " KEY:", 5); //4 : Select Key Type, targetValue, minKnobValue, maxKnobValue, stepSize //selectedKeyType = getValueByKnob(12, selectedKeyType, 0, 2, 1, " KEY:", 5); //4 : Select Key Type, targetValue, minKnobValue, maxKnobValue, stepSize
selectedKeyType = getValueByKnob(3, selectedKeyType, 0, 2, 1, " ST IA IB", 5); //4 : Select Key Type, targetValue, minKnobValue, maxKnobValue, stepSize selectedKeyType = getValueByKnob(11, selectedKeyType, 0, 2, 1, " ST IA IB", 5); //4 : Select Key Type, targetValue, minKnobValue, maxKnobValue, stepSize
/* /*
while(!btnDown()){ while(!btnDown()){
@ -1170,14 +1231,13 @@ void doMenu(){
if (i > 0){ if (i > 0){
if (modeCalibrate && select + i < 240) if (modeCalibrate && select + i < 240)
select += i; select += i;
if (!modeCalibrate && select + i < 130) else if (!modeCalibrate && select + i < 150)
select += i; select += i;
} }
else if (i < 0 && select - i >= -10)
select += i;
if (i < 0 && select - i >= -10) //if -> switch : reduce program memory 200byte
select += i; //caught ya, i is already -ve here, so you add it
//if -> switch reduce program memory 200byte
switch (select / 10) switch (select / 10)
{ {
case 0 : case 0 :
@ -1196,60 +1256,65 @@ void doMenu(){
menuIFSSetup(btnState); menuIFSSetup(btnState);
break; break;
case 5 : case 5 :
menuCWSpeed(btnState); menuATTSetup(btnState);
break; break;
case 6 : case 6 :
menuSplitOnOff(btnState); //SplitOn / off menuCWSpeed(btnState);
break; break;
case 7 : case 7 :
menuCHMemory(btnState, 0); //VFO to Memroy menuSplitOnOff(btnState); //SplitOn / off
break; break;
case 8 : case 8 :
menuCHMemory(btnState, 1); //Memory to VFO menuCHMemory(btnState, 0); //VFO to Memroy
break; break;
case 9 : case 9 :
menuCWAutoKey(btnState); menuCHMemory(btnState, 1); //Memory to VFO
break; break;
case 10 : case 10 :
menuWSPRSend(btnState); menuCWAutoKey(btnState);
break; break;
case 11 : case 11 :
menuSetup(btnState); menuWSPRSend(btnState);
break; break;
case 12 : case 12 :
menuExit(btnState); menuSDROnOff(btnState);
break; break;
case 13 : case 13 :
menuSetupCalibration(btnState); //crystal menuSetup(btnState);
break; break;
case 14 : case 14 :
menuSetupCarrier(btnState); //lsb menuExit(btnState);
break; break;
case 15 : case 15 :
menuSetupCWCarrier(btnState); //lsb menuSetupCalibration(btnState); //crystal
break; break;
case 16 : case 16 :
menuSetupCwTone(btnState); menuSetupCarrier(btnState); //ssb
break; break;
case 17 : case 17 :
menuSetupCwDelay(btnState); menuSetupCWCarrier(btnState); //cw
break; break;
case 18 : case 18 :
menuSetupCwTone(btnState);
break;
case 19 :
menuSetupCwDelay(btnState);
break;
case 20 :
menuSetupTXCWInterval(btnState); menuSetupTXCWInterval(btnState);
break; break;
case 19 : case 21 :
menuSetupKeyType(btnState); menuSetupKeyType(btnState);
break; break;
case 20 : case 22 :
menuADCMonitor(btnState); menuADCMonitor(btnState);
break; break;
case 21 : case 23 :
menuTxOnOff(btnState, 0x01); //TX OFF / ON menuTxOnOff(btnState, 0x01); //TX OFF / ON
break; break;
default : default :
menuExit(btnState); break; menuExit(btnState); break;
} }
Check_Cat(0); //To prevent disconnections Check_Cat(0); //To prevent disconnections
} }
} }

View File

@ -127,7 +127,7 @@ void si5351_set_calibration(int32_t cal){
void SetCarrierFreq() void SetCarrierFreq()
{ {
unsigned long appliedCarrier = ((cwMode == 0 ? usbCarrier : cwmCarrier) + (isIFShift && (inTx == 0) ? ifShiftValue : 0)); unsigned long appliedCarrier = ((cwMode == 0 ? usbCarrier : cwmCarrier) + (isIFShift && (inTx == 0) ? ifShiftValue : 0));
si5351bx_setfreq(0, appliedCarrier); si5351bx_setfreq(0, (sdrModeOn ? 0 : appliedCarrier));
/* /*
if (cwMode == 0) if (cwMode == 0)