fix printf when used with --regex

strip parentheses when parsing softdeps

ChangeLog

@@ -1,3 +1,11 @@
+*               31.08.2023      John McQuah
+- allow prt-get to remove build log when uninstalling a package (feature
+requested by samsep10l)
+
+*               31.03.2023      John McQuah
+- respect the user's choice of --install-root when running pre- or
+post-install scripts
+
 * 		10.03.2023	John McQuah
 - make it possible to consider optional dependencies when updating
 - bump version of the cache file format, to warn users about the

INSTALL

@@ -1,6 +1,7 @@
 Installing prt-get
 ------------------
+
 Installing prt-get is just a matter of
-./configure 
-make 
-make install
+meson setup bld --prefix=/usr
+cd bld && meson compile
+meson install

Makefile.am

@@ -1,7 +0,0 @@
-AUTOMAKE_OPTIONS = foreign
-
-
-MAINTAINERCLEANFILES = aclocal.m4 config.h.in configure Makefile.in stamp-h.in
-SUBDIRS = src doc misc  
-
-EXTRA_DIST = CREDITS FAQ LICENSE

Makefile.in

@@ -1,723 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = .
-DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \
-	$(srcdir)/Makefile.in $(srcdir)/config.h.in \
-	$(top_srcdir)/configure AUTHORS ChangeLog INSTALL TODO depcomp \
-	install-sh missing mkinstalldirs
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \
- configure.lineno config.status.lineno
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \
-	html-recursive info-recursive install-data-recursive \
-	install-dvi-recursive install-exec-recursive \
-	install-html-recursive install-info-recursive \
-	install-pdf-recursive install-ps-recursive install-recursive \
-	installcheck-recursive installdirs-recursive pdf-recursive \
-	ps-recursive uninstall-recursive
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-RECURSIVE_CLEAN_TARGETS = mostlyclean-recursive clean-recursive	\
-  distclean-recursive maintainer-clean-recursive
-AM_RECURSIVE_TARGETS = $(RECURSIVE_TARGETS:-recursive=) \
-	$(RECURSIVE_CLEAN_TARGETS:-recursive=) tags TAGS ctags CTAGS \
-	cscope distdir dist dist-all distcheck
-ETAGS = etags
-CTAGS = ctags
-CSCOPE = cscope
-DIST_SUBDIRS = $(SUBDIRS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-distdir = $(PACKAGE)-$(VERSION)
-top_distdir = $(distdir)
-am__remove_distdir = \
-  if test -d "$(distdir)"; then \
-    find "$(distdir)" -type d ! -perm -200 -exec chmod u+w {} ';' \
-      && rm -rf "$(distdir)" \
-      || { sleep 5 && rm -rf "$(distdir)"; }; \
-  else :; fi
-am__post_remove_distdir = $(am__remove_distdir)
-am__relativize = \
-  dir0=`pwd`; \
-  sed_first='s,^\([^/]*\)/.*$$,\1,'; \
-  sed_rest='s,^[^/]*/*,,'; \
-  sed_last='s,^.*/\([^/]*\)$$,\1,'; \
-  sed_butlast='s,/*[^/]*$$,,'; \
-  while test -n "$$dir1"; do \
-    first=`echo "$$dir1" | sed -e "$$sed_first"`; \
-    if test "$$first" != "."; then \
-      if test "$$first" = ".."; then \
-        dir2=`echo "$$dir0" | sed -e "$$sed_last"`/"$$dir2"; \
-        dir0=`echo "$$dir0" | sed -e "$$sed_butlast"`; \
-      else \
-        first2=`echo "$$dir2" | sed -e "$$sed_first"`; \
-        if test "$$first2" = "$$first"; then \
-          dir2=`echo "$$dir2" | sed -e "$$sed_rest"`; \
-        else \
-          dir2="../$$dir2"; \
-        fi; \
-        dir0="$$dir0"/"$$first"; \
-      fi; \
-    fi; \
-    dir1=`echo "$$dir1" | sed -e "$$sed_rest"`; \
-  done; \
-  reldir="$$dir2"
-DIST_ARCHIVES = $(distdir).tar.gz
-GZIP_ENV = --best
-DIST_TARGETS = dist-gzip
-distuninstallcheck_listfiles = find . -type f -print
-am__distuninstallcheck_listfiles = $(distuninstallcheck_listfiles) \
-  | sed 's|^\./|$(prefix)/|' | grep -v '$(infodir)/dir$$'
-distcleancheck_listfiles = find . -type f -print
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-AUTOMAKE_OPTIONS = foreign
-MAINTAINERCLEANFILES = aclocal.m4 config.h.in configure Makefile.in stamp-h.in
-SUBDIRS = src doc misc  
-EXTRA_DIST = CREDITS FAQ LICENSE
-all: config.h
-	$(MAKE) $(AM_MAKEFLAGS) all-recursive
-
-.SUFFIXES:
-am--refresh: Makefile
-	@:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      echo ' cd $(srcdir) && $(AUTOMAKE) --foreign'; \
-	      $(am__cd) $(srcdir) && $(AUTOMAKE) --foreign \
-		&& exit 0; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --foreign Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --foreign Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    echo ' $(SHELL) ./config.status'; \
-	    $(SHELL) ./config.status;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	$(am__cd) $(srcdir) && $(AUTOCONF)
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	$(am__cd) $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-$(am__aclocal_m4_deps):
-
-config.h: stamp-h1
-	@if test ! -f $@; then rm -f stamp-h1; else :; fi
-	@if test ! -f $@; then $(MAKE) $(AM_MAKEFLAGS) stamp-h1; else :; fi
-
-stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status
-	@rm -f stamp-h1
-	cd $(top_builddir) && $(SHELL) ./config.status config.h
-$(srcdir)/config.h.in:  $(am__configure_deps) 
-	($(am__cd) $(top_srcdir) && $(AUTOHEADER))
-	rm -f stamp-h1
-	touch $@
-
-distclean-hdr:
-	-rm -f config.h stamp-h1
-
-# This directory's subdirectories are mostly independent; you can cd
-# into them and run 'make' without going through this Makefile.
-# To change the values of 'make' variables: instead of editing Makefiles,
-# (1) if the variable is set in 'config.status', edit 'config.status'
-#     (which will cause the Makefiles to be regenerated when you run 'make');
-# (2) otherwise, pass the desired values on the 'make' command line.
-$(RECURSIVE_TARGETS) $(RECURSIVE_CLEAN_TARGETS):
-	@fail= failcom='exit 1'; \
-	for f in x $$MAKEFLAGS; do \
-	  case $$f in \
-	    *=* | --[!k]*);; \
-	    *k*) failcom='fail=yes';; \
-	  esac; \
-	done; \
-	dot_seen=no; \
-	target=`echo $@ | sed s/-recursive//`; \
-	case "$@" in \
-	  distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \
-	  *) list='$(SUBDIRS)' ;; \
-	esac; \
-	for subdir in $$list; do \
-	  echo "Making $$target in $$subdir"; \
-	  if test "$$subdir" = "."; then \
-	    dot_seen=yes; \
-	    local_target="$$target-am"; \
-	  else \
-	    local_target="$$target"; \
-	  fi; \
-	  ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \
-	  || eval $$failcom; \
-	done; \
-	if test "$$dot_seen" = "no"; then \
-	  $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \
-	fi; test -z "$$fail"
-tags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \
-	done
-ctags-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \
-	done
-cscopelist-recursive:
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  test "$$subdir" = . || ($(am__cd) $$subdir && $(MAKE) $(AM_MAKEFLAGS) cscopelist); \
-	done
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \
-	  include_option=--etags-include; \
-	  empty_fix=.; \
-	else \
-	  include_option=--include; \
-	  empty_fix=; \
-	fi; \
-	list='$(SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    test ! -f $$subdir/TAGS || \
-	      set "$$@" "$$include_option=$$here/$$subdir/TAGS"; \
-	  fi; \
-	done; \
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscope: cscope.files
-	test ! -s cscope.files \
-	  || $(CSCOPE) -b -q $(AM_CSCOPEFLAGS) $(CSCOPEFLAGS) -i cscope.files $(CSCOPE_ARGS)
-
-clean-cscope:
-	-rm -f cscope.files
-
-cscope.files: clean-cscope cscopelist-recursive cscopelist
-
-cscopelist: cscopelist-recursive $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-	-rm -f cscope.out cscope.in.out cscope.po.out cscope.files
-
-distdir: $(DISTFILES)
-	$(am__remove_distdir)
-	test -d "$(distdir)" || mkdir "$(distdir)"
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-	@list='$(DIST_SUBDIRS)'; for subdir in $$list; do \
-	  if test "$$subdir" = .; then :; else \
-	    $(am__make_dryrun) \
-	      || test -d "$(distdir)/$$subdir" \
-	      || $(MKDIR_P) "$(distdir)/$$subdir" \
-	      || exit 1; \
-	    dir1=$$subdir; dir2="$(distdir)/$$subdir"; \
-	    $(am__relativize); \
-	    new_distdir=$$reldir; \
-	    dir1=$$subdir; dir2="$(top_distdir)"; \
-	    $(am__relativize); \
-	    new_top_distdir=$$reldir; \
-	    echo " (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir="$$new_top_distdir" distdir="$$new_distdir" \\"; \
-	    echo "     am__remove_distdir=: am__skip_length_check=: am__skip_mode_fix=: distdir)"; \
-	    ($(am__cd) $$subdir && \
-	      $(MAKE) $(AM_MAKEFLAGS) \
-	        top_distdir="$$new_top_distdir" \
-	        distdir="$$new_distdir" \
-		am__remove_distdir=: \
-		am__skip_length_check=: \
-		am__skip_mode_fix=: \
-	        distdir) \
-	      || exit 1; \
-	  fi; \
-	done
-	-test -n "$(am__skip_mode_fix)" \
-	|| find "$(distdir)" -type d ! -perm -755 \
-		-exec chmod u+rwx,go+rx {} \; -o \
-	  ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -400 -exec chmod a+r {} \; -o \
-	  ! -type d ! -perm -444 -exec $(install_sh) -c -m a+r {} {} \; \
-	|| chmod -R a+r "$(distdir)"
-dist-gzip: distdir
-	tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz
-	$(am__post_remove_distdir)
-
-dist-bzip2: distdir
-	tardir=$(distdir) && $(am__tar) | BZIP2=$${BZIP2--9} bzip2 -c >$(distdir).tar.bz2
-	$(am__post_remove_distdir)
-
-dist-lzip: distdir
-	tardir=$(distdir) && $(am__tar) | lzip -c $${LZIP_OPT--9} >$(distdir).tar.lz
-	$(am__post_remove_distdir)
-
-dist-xz: distdir
-	tardir=$(distdir) && $(am__tar) | XZ_OPT=$${XZ_OPT--e} xz -c >$(distdir).tar.xz
-	$(am__post_remove_distdir)
-
-dist-tarZ: distdir
-	tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z
-	$(am__post_remove_distdir)
-
-dist-shar: distdir
-	shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz
-	$(am__post_remove_distdir)
-
-dist-zip: distdir
-	-rm -f $(distdir).zip
-	zip -rq $(distdir).zip $(distdir)
-	$(am__post_remove_distdir)
-
-dist dist-all:
-	$(MAKE) $(AM_MAKEFLAGS) $(DIST_TARGETS) am__post_remove_distdir='@:'
-	$(am__post_remove_distdir)
-
-# This target untars the dist file and tries a VPATH configuration.  Then
-# it guarantees that the distribution is self-contained by making another
-# tarfile.
-distcheck: dist
-	case '$(DIST_ARCHIVES)' in \
-	*.tar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).tar.gz | $(am__untar) ;;\
-	*.tar.bz2*) \
-	  bzip2 -dc $(distdir).tar.bz2 | $(am__untar) ;;\
-	*.tar.lz*) \
-	  lzip -dc $(distdir).tar.lz | $(am__untar) ;;\
-	*.tar.xz*) \
-	  xz -dc $(distdir).tar.xz | $(am__untar) ;;\
-	*.tar.Z*) \
-	  uncompress -c $(distdir).tar.Z | $(am__untar) ;;\
-	*.shar.gz*) \
-	  GZIP=$(GZIP_ENV) gzip -dc $(distdir).shar.gz | unshar ;;\
-	*.zip*) \
-	  unzip $(distdir).zip ;;\
-	esac
-	chmod -R a-w $(distdir); chmod u+w $(distdir)
-	mkdir $(distdir)/_build
-	mkdir $(distdir)/_inst
-	chmod a-w $(distdir)
-	test -d $(distdir)/_build || exit 0; \
-	dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \
-	  && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \
-	  && am__cwd=`pwd` \
-	  && $(am__cd) $(distdir)/_build \
-	  && ../configure --srcdir=.. --prefix="$$dc_install_base" \
-	    $(AM_DISTCHECK_CONFIGURE_FLAGS) \
-	    $(DISTCHECK_CONFIGURE_FLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) \
-	  && $(MAKE) $(AM_MAKEFLAGS) dvi \
-	  && $(MAKE) $(AM_MAKEFLAGS) check \
-	  && $(MAKE) $(AM_MAKEFLAGS) install \
-	  && $(MAKE) $(AM_MAKEFLAGS) installcheck \
-	  && $(MAKE) $(AM_MAKEFLAGS) uninstall \
-	  && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \
-	        distuninstallcheck \
-	  && chmod -R a-w "$$dc_install_base" \
-	  && ({ \
-	       (cd ../.. && umask 077 && mkdir "$$dc_destdir") \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \
-	       && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \
-	            distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \
-	      } || { rm -rf "$$dc_destdir"; exit 1; }) \
-	  && rm -rf "$$dc_destdir" \
-	  && $(MAKE) $(AM_MAKEFLAGS) dist \
-	  && rm -rf $(DIST_ARCHIVES) \
-	  && $(MAKE) $(AM_MAKEFLAGS) distcleancheck \
-	  && cd "$$am__cwd" \
-	  || exit 1
-	$(am__post_remove_distdir)
-	@(echo "$(distdir) archives ready for distribution: "; \
-	  list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \
-	  sed -e 1h -e 1s/./=/g -e 1p -e 1x -e '$$p' -e '$$x'
-distuninstallcheck:
-	@test -n '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: trying to run $@ with an empty' \
-	       '$$(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	$(am__cd) '$(distuninstallcheck_dir)' || { \
-	  echo 'ERROR: cannot chdir into $(distuninstallcheck_dir)' >&2; \
-	  exit 1; \
-	}; \
-	test `$(am__distuninstallcheck_listfiles) | wc -l` -eq 0 \
-	   || { echo "ERROR: files left after uninstall:" ; \
-	        if test -n "$(DESTDIR)"; then \
-	          echo "  (check DESTDIR support)"; \
-	        fi ; \
-	        $(distuninstallcheck_listfiles) ; \
-	        exit 1; } >&2
-distcleancheck: distclean
-	@if test '$(srcdir)' = . ; then \
-	  echo "ERROR: distcleancheck can only run from a VPATH build" ; \
-	  exit 1 ; \
-	fi
-	@test `$(distcleancheck_listfiles) | wc -l` -eq 0 \
-	  || { echo "ERROR: files left in build directory after distclean:" ; \
-	       $(distcleancheck_listfiles) ; \
-	       exit 1; } >&2
-check-am: all-am
-check: check-recursive
-all-am: Makefile config.h
-installdirs: installdirs-recursive
-installdirs-am:
-install: install-recursive
-install-exec: install-exec-recursive
-install-data: install-data-recursive
-uninstall: uninstall-recursive
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-recursive
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-	-test -z "$(MAINTAINERCLEANFILES)" || rm -f $(MAINTAINERCLEANFILES)
-clean: clean-recursive
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic distclean-hdr distclean-tags
-
-dvi: dvi-recursive
-
-dvi-am:
-
-html: html-recursive
-
-html-am:
-
-info: info-recursive
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-recursive
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-recursive
-
-install-html-am:
-
-install-info: install-info-recursive
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-recursive
-
-install-pdf-am:
-
-install-ps: install-ps-recursive
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-recursive
-	-rm -f $(am__CONFIG_DISTCLEAN_FILES)
-	-rm -rf $(top_srcdir)/autom4te.cache
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-recursive
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-recursive
-
-pdf-am:
-
-ps: ps-recursive
-
-ps-am:
-
-uninstall-am:
-
-.MAKE: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) all \
-	cscopelist-recursive ctags-recursive install-am install-strip \
-	tags-recursive
-
-.PHONY: $(RECURSIVE_CLEAN_TARGETS) $(RECURSIVE_TARGETS) CTAGS GTAGS \
-	all all-am am--refresh check check-am clean clean-cscope \
-	clean-generic cscope cscopelist cscopelist-recursive ctags \
-	ctags-recursive dist dist-all dist-bzip2 dist-gzip dist-lzip \
-	dist-shar dist-tarZ dist-xz dist-zip distcheck distclean \
-	distclean-generic distclean-hdr distclean-tags distcleancheck \
-	distdir distuninstallcheck dvi dvi-am html html-am info \
-	info-am install install-am install-data install-data-am \
-	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-pdf install-pdf-am install-ps \
-	install-ps-am install-strip installcheck installcheck-am \
-	installdirs installdirs-am maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am tags tags-recursive uninstall uninstall-am
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

aclocal.m4

@@ -1,984 +0,0 @@
-# generated automatically by aclocal 1.12.2 -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-m4_if(m4_defn([AC_AUTOCONF_VERSION]), [2.69],,
-[m4_warning([this file was generated for autoconf 2.69.
-You have another version of autoconf.  It may work, but is not guaranteed to.
-If you have problems, you may need to regenerate the build system entirely.
-To do so, use the procedure documented by the package, typically 'autoreconf'.])])
-
-# Copyright (C) 2002-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_AUTOMAKE_VERSION(VERSION)
-# ----------------------------
-# Automake X.Y traces this macro to ensure aclocal.m4 has been
-# generated from the m4 files accompanying Automake X.Y.
-# (This private macro should not be called outside this file.)
-AC_DEFUN([AM_AUTOMAKE_VERSION],
-[am__api_version='1.12'
-dnl Some users find AM_AUTOMAKE_VERSION and mistake it for a way to
-dnl require some minimum version.  Point them to the right macro.
-m4_if([$1], [1.12.2], [],
-      [AC_FATAL([Do not call $0, use AM_INIT_AUTOMAKE([$1]).])])dnl
-])
-
-# _AM_AUTOCONF_VERSION(VERSION)
-# -----------------------------
-# aclocal traces this macro to find the Autoconf version.
-# This is a private macro too.  Using m4_define simplifies
-# the logic in aclocal, which can simply ignore this definition.
-m4_define([_AM_AUTOCONF_VERSION], [])
-
-# AM_SET_CURRENT_AUTOMAKE_VERSION
-# -------------------------------
-# Call AM_AUTOMAKE_VERSION and AM_AUTOMAKE_VERSION so they can be traced.
-# This function is AC_REQUIREd by AM_INIT_AUTOMAKE.
-AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION],
-[AM_AUTOMAKE_VERSION([1.12.2])dnl
-m4_ifndef([AC_AUTOCONF_VERSION],
-  [m4_copy([m4_PACKAGE_VERSION], [AC_AUTOCONF_VERSION])])dnl
-_AM_AUTOCONF_VERSION(m4_defn([AC_AUTOCONF_VERSION]))])
-
-# AM_AUX_DIR_EXPAND                                         -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets
-# $ac_aux_dir to '$srcdir/foo'.  In other projects, it is set to
-# '$srcdir', '$srcdir/..', or '$srcdir/../..'.
-#
-# Of course, Automake must honor this variable whenever it calls a
-# tool from the auxiliary directory.  The problem is that $srcdir (and
-# therefore $ac_aux_dir as well) can be either absolute or relative,
-# depending on how configure is run.  This is pretty annoying, since
-# it makes $ac_aux_dir quite unusable in subdirectories: in the top
-# source directory, any form will work fine, but in subdirectories a
-# relative path needs to be adjusted first.
-#
-# $ac_aux_dir/missing
-#    fails when called from a subdirectory if $ac_aux_dir is relative
-# $top_srcdir/$ac_aux_dir/missing
-#    fails if $ac_aux_dir is absolute,
-#    fails when called from a subdirectory in a VPATH build with
-#          a relative $ac_aux_dir
-#
-# The reason of the latter failure is that $top_srcdir and $ac_aux_dir
-# are both prefixed by $srcdir.  In an in-source build this is usually
-# harmless because $srcdir is '.', but things will broke when you
-# start a VPATH build or use an absolute $srcdir.
-#
-# So we could use something similar to $top_srcdir/$ac_aux_dir/missing,
-# iff we strip the leading $srcdir from $ac_aux_dir.  That would be:
-#   am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"`
-# and then we would define $MISSING as
-#   MISSING="\${SHELL} $am_aux_dir/missing"
-# This will work as long as MISSING is not called from configure, because
-# unfortunately $(top_srcdir) has no meaning in configure.
-# However there are other variables, like CC, which are often used in
-# configure, and could therefore not use this "fixed" $ac_aux_dir.
-#
-# Another solution, used here, is to always expand $ac_aux_dir to an
-# absolute PATH.  The drawback is that using absolute paths prevent a
-# configured tree to be moved without reconfiguration.
-
-AC_DEFUN([AM_AUX_DIR_EXPAND],
-[dnl Rely on autoconf to set up CDPATH properly.
-AC_PREREQ([2.50])dnl
-# expand $ac_aux_dir to an absolute path
-am_aux_dir=`cd $ac_aux_dir && pwd`
-])
-
-# AM_CONDITIONAL                                            -*- Autoconf -*-
-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 10
-
-# AM_CONDITIONAL(NAME, SHELL-CONDITION)
-# -------------------------------------
-# Define a conditional.
-AC_DEFUN([AM_CONDITIONAL],
-[AC_PREREQ([2.52])dnl
- m4_if([$1], [TRUE],  [AC_FATAL([$0: invalid condition: $1])],
-       [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl
-AC_SUBST([$1_TRUE])dnl
-AC_SUBST([$1_FALSE])dnl
-_AM_SUBST_NOTMAKE([$1_TRUE])dnl
-_AM_SUBST_NOTMAKE([$1_FALSE])dnl
-m4_define([_AM_COND_VALUE_$1], [$2])dnl
-if $2; then
-  $1_TRUE=
-  $1_FALSE='#'
-else
-  $1_TRUE='#'
-  $1_FALSE=
-fi
-AC_CONFIG_COMMANDS_PRE(
-[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then
-  AC_MSG_ERROR([[conditional "$1" was never defined.
-Usually this means the macro was only invoked conditionally.]])
-fi])])
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 17
-
-# There are a few dirty hacks below to avoid letting 'AC_PROG_CC' be
-# written in clear, in which case automake, when reading aclocal.m4,
-# will think it sees a *use*, and therefore will trigger all it's
-# C support machinery.  Also note that it means that autoscan, seeing
-# CC etc. in the Makefile, will ask for an AC_PROG_CC use...
-
-
-# _AM_DEPENDENCIES(NAME)
-# ----------------------
-# See how the compiler implements dependency checking.
-# NAME is "CC", "CXX", "OBJC", "OBJCXX", "UPC", or "GJC".
-# We try a few techniques and use that to set a single cache variable.
-#
-# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was
-# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular
-# dependency, and given that the user is not expected to run this macro,
-# just rely on AC_PROG_CC.
-AC_DEFUN([_AM_DEPENDENCIES],
-[AC_REQUIRE([AM_SET_DEPDIR])dnl
-AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl
-AC_REQUIRE([AM_MAKE_INCLUDE])dnl
-AC_REQUIRE([AM_DEP_TRACK])dnl
-
-m4_if([$1], [CC],   [depcc="$CC"   am_compiler_list=],
-      [$1], [CXX],  [depcc="$CXX"  am_compiler_list=],
-      [$1], [OBJC], [depcc="$OBJC" am_compiler_list='gcc3 gcc'],
-      [$1], [OBJCXX], [depcc="$OBJCXX" am_compiler_list='gcc3 gcc'],
-      [$1], [UPC],  [depcc="$UPC"  am_compiler_list=],
-      [$1], [GCJ],  [depcc="$GCJ"  am_compiler_list='gcc3 gcc'],
-                    [depcc="$$1"   am_compiler_list=])
-
-AC_CACHE_CHECK([dependency style of $depcc],
-               [am_cv_$1_dependencies_compiler_type],
-[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then
-  # We make a subdir and do the tests there.  Otherwise we can end up
-  # making bogus files that we don't know about and never remove.  For
-  # instance it was reported that on HP-UX the gcc test will end up
-  # making a dummy file named 'D' -- because '-MD' means "put the output
-  # in D".
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  # Copy depcomp to subdir because otherwise we won't find it if we're
-  # using a relative directory.
-  cp "$am_depcomp" conftest.dir
-  cd conftest.dir
-  # We will build objects and dependencies in a subdirectory because
-  # it helps to detect inapplicable dependency modes.  For instance
-  # both Tru64's cc and ICC support -MD to output dependencies as a
-  # side effect of compilation, but ICC will put the dependencies in
-  # the current directory while Tru64 will put them in the object
-  # directory.
-  mkdir sub
-
-  am_cv_$1_dependencies_compiler_type=none
-  if test "$am_compiler_list" = ""; then
-     am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp`
-  fi
-  am__universal=false
-  m4_case([$1], [CC],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac],
-    [CXX],
-    [case " $depcc " in #(
-     *\ -arch\ *\ -arch\ *) am__universal=true ;;
-     esac])
-
-  for depmode in $am_compiler_list; do
-    # Setup a source with many dependencies, because some compilers
-    # like to wrap large dependency lists on column 80 (with \), and
-    # we should not choose a depcomp mode which is confused by this.
-    #
-    # We need to recreate these files for each test, as the compiler may
-    # overwrite some of them when testing with obscure command lines.
-    # This happens at least with the AIX C compiler.
-    : > sub/conftest.c
-    for i in 1 2 3 4 5 6; do
-      echo '#include "conftst'$i'.h"' >> sub/conftest.c
-      # Using ": > sub/conftst$i.h" creates only sub/conftst1.h with
-      # Solaris 10 /bin/sh.
-      echo '/* dummy */' > sub/conftst$i.h
-    done
-    echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf
-
-    # We check with '-c' and '-o' for the sake of the "dashmstdout"
-    # mode.  It turns out that the SunPro C++ compiler does not properly
-    # handle '-M -o', and we need to detect this.  Also, some Intel
-    # versions had trouble with output in subdirs.
-    am__obj=sub/conftest.${OBJEXT-o}
-    am__minus_obj="-o $am__obj"
-    case $depmode in
-    gcc)
-      # This depmode causes a compiler race in universal mode.
-      test "$am__universal" = false || continue
-      ;;
-    nosideeffect)
-      # After this tag, mechanisms are not by side-effect, so they'll
-      # only be used when explicitly requested.
-      if test "x$enable_dependency_tracking" = xyes; then
-	continue
-      else
-	break
-      fi
-      ;;
-    msvc7 | msvc7msys | msvisualcpp | msvcmsys)
-      # This compiler won't grok '-c -o', but also, the minuso test has
-      # not run yet.  These depmodes are late enough in the game, and
-      # so weak that their functioning should not be impacted.
-      am__obj=conftest.${OBJEXT-o}
-      am__minus_obj=
-      ;;
-    none) break ;;
-    esac
-    if depmode=$depmode \
-       source=sub/conftest.c object=$am__obj \
-       depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \
-       $SHELL ./depcomp $depcc -c $am__minus_obj sub/conftest.c \
-         >/dev/null 2>conftest.err &&
-       grep sub/conftst1.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 &&
-       grep $am__obj sub/conftest.Po > /dev/null 2>&1 &&
-       ${MAKE-make} -s -f confmf > /dev/null 2>&1; then
-      # icc doesn't choke on unknown options, it will just issue warnings
-      # or remarks (even with -Werror).  So we grep stderr for any message
-      # that says an option was ignored or not supported.
-      # When given -MP, icc 7.0 and 7.1 complain thusly:
-      #   icc: Command line warning: ignoring option '-M'; no argument required
-      # The diagnosis changed in icc 8.0:
-      #   icc: Command line remark: option '-MP' not supported
-      if (grep 'ignoring option' conftest.err ||
-          grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else
-        am_cv_$1_dependencies_compiler_type=$depmode
-        break
-      fi
-    fi
-  done
-
-  cd ..
-  rm -rf conftest.dir
-else
-  am_cv_$1_dependencies_compiler_type=none
-fi
-])
-AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type])
-AM_CONDITIONAL([am__fastdep$1], [
-  test "x$enable_dependency_tracking" != xno \
-  && test "$am_cv_$1_dependencies_compiler_type" = gcc3])
-])
-
-
-# AM_SET_DEPDIR
-# -------------
-# Choose a directory name for dependency files.
-# This macro is AC_REQUIREd in _AM_DEPENDENCIES.
-AC_DEFUN([AM_SET_DEPDIR],
-[AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl
-])
-
-
-# AM_DEP_TRACK
-# ------------
-AC_DEFUN([AM_DEP_TRACK],
-[AC_ARG_ENABLE([dependency-tracking], [dnl
-AS_HELP_STRING(
-  [--enable-dependency-tracking],
-  [do not reject slow dependency extractors])
-AS_HELP_STRING(
-  [--disable-dependency-tracking],
-  [speeds up one-time build])])
-if test "x$enable_dependency_tracking" != xno; then
-  am_depcomp="$ac_aux_dir/depcomp"
-  AMDEPBACKSLASH='\'
-  am__nodep='_no'
-fi
-AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno])
-AC_SUBST([AMDEPBACKSLASH])dnl
-_AM_SUBST_NOTMAKE([AMDEPBACKSLASH])dnl
-AC_SUBST([am__nodep])dnl
-_AM_SUBST_NOTMAKE([am__nodep])dnl
-])
-
-# Generate code to set up dependency tracking.              -*- Autoconf -*-
-
-# Copyright (C) 1999-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# _AM_OUTPUT_DEPENDENCY_COMMANDS
-# ------------------------------
-AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS],
-[{
-  # Autoconf 2.62 quotes --file arguments for eval, but not when files
-  # are listed without --file.  Let's play safe and only enable the eval
-  # if we detect the quoting.
-  case $CONFIG_FILES in
-  *\'*) eval set x "$CONFIG_FILES" ;;
-  *)   set x $CONFIG_FILES ;;
-  esac
-  shift
-  for mf
-  do
-    # Strip MF so we end up with the name of the file.
-    mf=`echo "$mf" | sed -e 's/:.*$//'`
-    # Check whether this is an Automake generated Makefile or not.
-    # We used to match only the files named 'Makefile.in', but
-    # some people rename them; so instead we look at the file content.
-    # Grep'ing the first line is not enough: some people post-process
-    # each Makefile.in and add a new line on top of each file to say so.
-    # Grep'ing the whole file is not good either: AIX grep has a line
-    # limit of 2048, but all sed's we know have understand at least 4000.
-    if sed -n 's,^#.*generated by automake.*,X,p' "$mf" | grep X >/dev/null 2>&1; then
-      dirpart=`AS_DIRNAME("$mf")`
-    else
-      continue
-    fi
-    # Extract the definition of DEPDIR, am__include, and am__quote
-    # from the Makefile without running 'make'.
-    DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"`
-    test -z "$DEPDIR" && continue
-    am__include=`sed -n 's/^am__include = //p' < "$mf"`
-    test -z "am__include" && continue
-    am__quote=`sed -n 's/^am__quote = //p' < "$mf"`
-    # Find all dependency output files, they are included files with
-    # $(DEPDIR) in their names.  We invoke sed twice because it is the
-    # simplest approach to changing $(DEPDIR) to its actual value in the
-    # expansion.
-    for file in `sed -n "
-      s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \
-	 sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g'`; do
-      # Make sure the directory exists.
-      test -f "$dirpart/$file" && continue
-      fdir=`AS_DIRNAME(["$file"])`
-      AS_MKDIR_P([$dirpart/$fdir])
-      # echo "creating $dirpart/$file"
-      echo '# dummy' > "$dirpart/$file"
-    done
-  done
-}
-])# _AM_OUTPUT_DEPENDENCY_COMMANDS
-
-
-# AM_OUTPUT_DEPENDENCY_COMMANDS
-# -----------------------------
-# This macro should only be invoked once -- use via AC_REQUIRE.
-#
-# This code is only required when automatic dependency tracking
-# is enabled.  FIXME.  This creates each '.P' file that we will
-# need in order to bootstrap the dependency handling code.
-AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS],
-[AC_CONFIG_COMMANDS([depfiles],
-     [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS],
-     [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"])
-])
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_CONFIG_HEADER is obsolete.  It has been replaced by AC_CONFIG_HEADERS.
-AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)])
-
-# Do all the work for Automake.                             -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 19
-
-# This macro actually does too much.  Some checks are only needed if
-# your package does certain things.  But this isn't really a big deal.
-
-# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE])
-# AM_INIT_AUTOMAKE([OPTIONS])
-# -----------------------------------------------
-# The call with PACKAGE and VERSION arguments is the old style
-# call (pre autoconf-2.50), which is being phased out.  PACKAGE
-# and VERSION should now be passed to AC_INIT and removed from
-# the call to AM_INIT_AUTOMAKE.
-# We support both call styles for the transition.  After
-# the next Automake release, Autoconf can make the AC_INIT
-# arguments mandatory, and then we can depend on a new Autoconf
-# release and drop the old call support.
-AC_DEFUN([AM_INIT_AUTOMAKE],
-[AC_PREREQ([2.62])dnl
-dnl Autoconf wants to disallow AM_ names.  We explicitly allow
-dnl the ones we care about.
-m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl
-AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl
-AC_REQUIRE([AC_PROG_INSTALL])dnl
-if test "`cd $srcdir && pwd`" != "`pwd`"; then
-  # Use -I$(srcdir) only when $(srcdir) != ., so that make's output
-  # is not polluted with repeated "-I."
-  AC_SUBST([am__isrc], [' -I$(srcdir)'])_AM_SUBST_NOTMAKE([am__isrc])dnl
-  # test to see if srcdir already configured
-  if test -f $srcdir/config.status; then
-    AC_MSG_ERROR([source directory already configured; run "make distclean" there first])
-  fi
-fi
-
-# test whether we have cygpath
-if test -z "$CYGPATH_W"; then
-  if (cygpath --version) >/dev/null 2>/dev/null; then
-    CYGPATH_W='cygpath -w'
-  else
-    CYGPATH_W=echo
-  fi
-fi
-AC_SUBST([CYGPATH_W])
-
-# Define the identity of the package.
-dnl Distinguish between old-style and new-style calls.
-m4_ifval([$2],
-[AC_DIAGNOSE([obsolete],
-[$0: two- and three-arguments forms are deprecated.  For more info, see:
-http://www.gnu.org/software/automake/manual/automake.html#Modernize-AM_INIT_AUTOMAKE-invocation])
-m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl
- AC_SUBST([PACKAGE], [$1])dnl
- AC_SUBST([VERSION], [$2])],
-[_AM_SET_OPTIONS([$1])dnl
-dnl Diagnose old-style AC_INIT with new-style AM_AUTOMAKE_INIT.
-m4_if(
-  m4_ifdef([AC_PACKAGE_NAME], [ok]):m4_ifdef([AC_PACKAGE_VERSION], [ok]),
-  [ok:ok],,
-  [m4_fatal([AC_INIT should be called with package and version arguments])])dnl
- AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl
- AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl
-
-_AM_IF_OPTION([no-define],,
-[AC_DEFINE_UNQUOTED([PACKAGE], ["$PACKAGE"], [Name of package])
- AC_DEFINE_UNQUOTED([VERSION], ["$VERSION"], [Version number of package])])dnl
-
-# Some tools Automake needs.
-AC_REQUIRE([AM_SANITY_CHECK])dnl
-AC_REQUIRE([AC_ARG_PROGRAM])dnl
-AM_MISSING_PROG([ACLOCAL], [aclocal-${am__api_version}])
-AM_MISSING_PROG([AUTOCONF], [autoconf])
-AM_MISSING_PROG([AUTOMAKE], [automake-${am__api_version}])
-AM_MISSING_PROG([AUTOHEADER], [autoheader])
-AM_MISSING_PROG([MAKEINFO], [makeinfo])
-AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-AC_REQUIRE([AM_PROG_INSTALL_STRIP])dnl
-AC_REQUIRE([AC_PROG_MKDIR_P])dnl
-# For better backward compatibility.  To be removed once Automake 1.9.x
-# dies out for good.  For more background, see:
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00001.html>
-# <http://lists.gnu.org/archive/html/automake/2012-07/msg00014.html>
-AC_SUBST([mkdir_p], ['$(MKDIR_P)'])
-# We need awk for the "check" target.  The system "awk" is bad on
-# some platforms.
-AC_REQUIRE([AC_PROG_AWK])dnl
-AC_REQUIRE([AC_PROG_MAKE_SET])dnl
-AC_REQUIRE([AM_SET_LEADING_DOT])dnl
-_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])],
-	      [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])],
-			     [_AM_PROG_TAR([v7])])])
-_AM_IF_OPTION([no-dependencies],,
-[AC_PROVIDE_IFELSE([AC_PROG_CC],
-		  [_AM_DEPENDENCIES([CC])],
-		  [m4_define([AC_PROG_CC],
-			     m4_defn([AC_PROG_CC])[_AM_DEPENDENCIES([CC])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_CXX],
-		  [_AM_DEPENDENCIES([CXX])],
-		  [m4_define([AC_PROG_CXX],
-			     m4_defn([AC_PROG_CXX])[_AM_DEPENDENCIES([CXX])])])dnl
-AC_PROVIDE_IFELSE([AC_PROG_OBJC],
-		  [_AM_DEPENDENCIES([OBJC])],
-		  [m4_define([AC_PROG_OBJC],
-			     m4_defn([AC_PROG_OBJC])[_AM_DEPENDENCIES([OBJC])])])dnl
-dnl Support for Objective C++ was only introduced in Autoconf 2.65,
-dnl but we still cater to Autoconf 2.62.
-m4_ifdef([AC_PROG_OBJCXX],
-[AC_PROVIDE_IFELSE([AC_PROG_OBJCXX],
-		  [_AM_DEPENDENCIES([OBJCXX])],
-		  [m4_define([AC_PROG_OBJCXX],
-			     m4_defn([AC_PROG_OBJCXX])[_AM_DEPENDENCIES([OBJCXX])])])])dnl
-])
-_AM_IF_OPTION([silent-rules], [AC_REQUIRE([AM_SILENT_RULES])])dnl
-dnl The 'parallel-tests' driver may need to know about EXEEXT, so add the
-dnl 'am__EXEEXT' conditional if _AM_COMPILER_EXEEXT was seen.  This macro
-dnl is hooked onto _AC_COMPILER_EXEEXT early, see below.
-AC_CONFIG_COMMANDS_PRE(dnl
-[m4_provide_if([_AM_COMPILER_EXEEXT],
-  [AM_CONDITIONAL([am__EXEEXT], [test -n "$EXEEXT"])])])dnl
-])
-
-dnl Hook into '_AC_COMPILER_EXEEXT' early to learn its expansion.  Do not
-dnl add the conditional right here, as _AC_COMPILER_EXEEXT may be further
-dnl mangled by Autoconf and run in a shell conditional statement.
-m4_define([_AC_COMPILER_EXEEXT],
-m4_defn([_AC_COMPILER_EXEEXT])[m4_provide([_AM_COMPILER_EXEEXT])])
-
-
-# When config.status generates a header, we must update the stamp-h file.
-# This file resides in the same directory as the config header
-# that is generated.  The stamp files are numbered to have different names.
-
-# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the
-# loop where config.status creates the headers, so we can generate
-# our stamp files there.
-AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK],
-[# Compute $1's index in $config_headers.
-_am_arg=$1
-_am_stamp_count=1
-for _am_header in $config_headers :; do
-  case $_am_header in
-    $_am_arg | $_am_arg:* )
-      break ;;
-    * )
-      _am_stamp_count=`expr $_am_stamp_count + 1` ;;
-  esac
-done
-echo "timestamp for $_am_arg" >`AS_DIRNAME(["$_am_arg"])`/stamp-h[]$_am_stamp_count])
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 8
-
-# AM_PROG_INSTALL_SH
-# ------------------
-# Define $install_sh.
-AC_DEFUN([AM_PROG_INSTALL_SH],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-if test x"${install_sh}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    install_sh="\${SHELL} '$am_aux_dir/install-sh'" ;;
-  *)
-    install_sh="\${SHELL} $am_aux_dir/install-sh"
-  esac
-fi
-AC_SUBST([install_sh])])
-
-# Copyright (C) 2003-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# Check whether the underlying file-system supports filenames
-# with a leading dot.  For instance MS-DOS doesn't.
-AC_DEFUN([AM_SET_LEADING_DOT],
-[rm -rf .tst 2>/dev/null
-mkdir .tst 2>/dev/null
-if test -d .tst; then
-  am__leading_dot=.
-else
-  am__leading_dot=_
-fi
-rmdir .tst 2>/dev/null
-AC_SUBST([am__leading_dot])])
-
-# Check to see how 'make' treats includes.	            -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 5
-
-# AM_MAKE_INCLUDE()
-# -----------------
-# Check to see how make treats includes.
-AC_DEFUN([AM_MAKE_INCLUDE],
-[am_make=${MAKE-make}
-cat > confinc << 'END'
-am__doit:
-	@echo this is the am__doit target
-.PHONY: am__doit
-END
-# If we don't find an include directive, just comment out the code.
-AC_MSG_CHECKING([for style of include used by $am_make])
-am__include="#"
-am__quote=
-_am_result=none
-# First try GNU make style include.
-echo "include confinc" > confmf
-# Ignore all kinds of additional output from 'make'.
-case `$am_make -s -f confmf 2> /dev/null` in #(
-*the\ am__doit\ target*)
-  am__include=include
-  am__quote=
-  _am_result=GNU
-  ;;
-esac
-# Now try BSD make style include.
-if test "$am__include" = "#"; then
-   echo '.include "confinc"' > confmf
-   case `$am_make -s -f confmf 2> /dev/null` in #(
-   *the\ am__doit\ target*)
-     am__include=.include
-     am__quote="\""
-     _am_result=BSD
-     ;;
-   esac
-fi
-AC_SUBST([am__include])
-AC_SUBST([am__quote])
-AC_MSG_RESULT([$_am_result])
-rm -f confinc confmf
-])
-
-# Fake the existence of programs that GNU maintainers use.  -*- Autoconf -*-
-
-# Copyright (C) 1997-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 7
-
-# AM_MISSING_PROG(NAME, PROGRAM)
-# ------------------------------
-AC_DEFUN([AM_MISSING_PROG],
-[AC_REQUIRE([AM_MISSING_HAS_RUN])
-$1=${$1-"${am_missing_run}$2"}
-AC_SUBST($1)])
-
-
-# AM_MISSING_HAS_RUN
-# ------------------
-# Define MISSING if not defined so far and test if it supports --run.
-# If it does, set am_missing_run to use it, otherwise, to nothing.
-AC_DEFUN([AM_MISSING_HAS_RUN],
-[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl
-AC_REQUIRE_AUX_FILE([missing])dnl
-if test x"${MISSING+set}" != xset; then
-  case $am_aux_dir in
-  *\ * | *\	*)
-    MISSING="\${SHELL} \"$am_aux_dir/missing\"" ;;
-  *)
-    MISSING="\${SHELL} $am_aux_dir/missing" ;;
-  esac
-fi
-# Use eval to expand $SHELL
-if eval "$MISSING --run true"; then
-  am_missing_run="$MISSING --run "
-else
-  am_missing_run=
-  AC_MSG_WARN(['missing' script is too old or missing])
-fi
-])
-
-# Helper functions for option handling.                     -*- Autoconf -*-
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 6
-
-# _AM_MANGLE_OPTION(NAME)
-# -----------------------
-AC_DEFUN([_AM_MANGLE_OPTION],
-[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])])
-
-# _AM_SET_OPTION(NAME)
-# --------------------
-# Set option NAME.  Presently that only means defining a flag for this option.
-AC_DEFUN([_AM_SET_OPTION],
-[m4_define(_AM_MANGLE_OPTION([$1]), [1])])
-
-# _AM_SET_OPTIONS(OPTIONS)
-# ------------------------
-# OPTIONS is a space-separated list of Automake options.
-AC_DEFUN([_AM_SET_OPTIONS],
-[m4_foreach_w([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])])
-
-# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET])
-# -------------------------------------------
-# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise.
-AC_DEFUN([_AM_IF_OPTION],
-[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])])
-
-# Check to make sure that the build environment is sane.    -*- Autoconf -*-
-
-# Copyright (C) 1996-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 9
-
-# AM_SANITY_CHECK
-# ---------------
-AC_DEFUN([AM_SANITY_CHECK],
-[AC_MSG_CHECKING([whether build environment is sane])
-# Reject unsafe characters in $srcdir or the absolute working directory
-# name.  Accept space and tab only in the latter.
-am_lf='
-'
-case `pwd` in
-  *[[\\\"\#\$\&\'\`$am_lf]]*)
-    AC_MSG_ERROR([unsafe absolute working directory name]);;
-esac
-case $srcdir in
-  *[[\\\"\#\$\&\'\`$am_lf\ \	]]*)
-    AC_MSG_ERROR([unsafe srcdir value: '$srcdir']);;
-esac
-
-# Do 'set' in a subshell so we don't clobber the current shell's
-# arguments.  Must try -L first in case configure is actually a
-# symlink; some systems play weird games with the mod time of symlinks
-# (eg FreeBSD returns the mod time of the symlink's containing
-# directory).
-if (
-   am_has_slept=no
-   for am_try in 1 2; do
-     echo "timestamp, slept: $am_has_slept" > conftest.file
-     set X `ls -Lt "$srcdir/configure" conftest.file 2> /dev/null`
-     if test "$[*]" = "X"; then
-	# -L didn't work.
-	set X `ls -t "$srcdir/configure" conftest.file`
-     fi
-     if test "$[*]" != "X $srcdir/configure conftest.file" \
-	&& test "$[*]" != "X conftest.file $srcdir/configure"; then
-
-	# If neither matched, then we have a broken ls.  This can happen
-	# if, for instance, CONFIG_SHELL is bash and it inherits a
-	# broken ls alias from the environment.  This has actually
-	# happened.  Such a system could not be considered "sane".
-	AC_MSG_ERROR([ls -t appears to fail.  Make sure there is not a broken
-  alias in your environment])
-     fi
-     if test "$[2]" = conftest.file || test $am_try -eq 2; then
-       break
-     fi
-     # Just in case.
-     sleep 1
-     am_has_slept=yes
-   done
-   test "$[2]" = conftest.file
-   )
-then
-   # Ok.
-   :
-else
-   AC_MSG_ERROR([newly created file is older than distributed files!
-Check your system clock])
-fi
-AC_MSG_RESULT([yes])
-# If we didn't sleep, we still need to ensure time stamps of config.status and
-# generated files are strictly newer.
-am_sleep_pid=
-if grep 'slept: no' conftest.file >/dev/null 2>&1; then
-  ( sleep 1 ) &
-  am_sleep_pid=$!
-fi
-AC_CONFIG_COMMANDS_PRE(
-  [AC_MSG_CHECKING([that generated files are newer than configure])
-   if test -n "$am_sleep_pid"; then
-     # Hide warnings about reused PIDs.
-     wait $am_sleep_pid 2>/dev/null
-   fi
-   AC_MSG_RESULT([done])])
-rm -f conftest.file
-])
-
-# Copyright (C) 2001-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 2
-
-# AM_PROG_INSTALL_STRIP
-# ---------------------
-# One issue with vendor 'install' (even GNU) is that you can't
-# specify the program used to strip binaries.  This is especially
-# annoying in cross-compiling environments, where the build's strip
-# is unlikely to handle the host's binaries.
-# Fortunately install-sh will honor a STRIPPROG variable, so we
-# always use install-sh in "make install-strip", and initialize
-# STRIPPROG with the value of the STRIP variable (set by the user).
-AC_DEFUN([AM_PROG_INSTALL_STRIP],
-[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl
-# Installed binaries are usually stripped using 'strip' when the user
-# run "make install-strip".  However 'strip' might not be the right
-# tool to use in cross-compilation environments, therefore Automake
-# will honor the 'STRIP' environment variable to overrule this program.
-dnl Don't test for $cross_compiling = yes, because it might be 'maybe'.
-if test "$cross_compiling" != no; then
-  AC_CHECK_TOOL([STRIP], [strip], :)
-fi
-INSTALL_STRIP_PROGRAM="\$(install_sh) -c -s"
-AC_SUBST([INSTALL_STRIP_PROGRAM])])
-
-# Copyright (C) 2006-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_SUBST_NOTMAKE(VARIABLE)
-# ---------------------------
-# Prevent Automake from outputting VARIABLE = @VARIABLE@ in Makefile.in.
-# This macro is traced by Automake.
-AC_DEFUN([_AM_SUBST_NOTMAKE])
-
-# AM_SUBST_NOTMAKE(VARIABLE)
-# --------------------------
-# Public sister of _AM_SUBST_NOTMAKE.
-AC_DEFUN([AM_SUBST_NOTMAKE], [_AM_SUBST_NOTMAKE($@)])
-
-# Check how to create a tarball.                            -*- Autoconf -*-
-
-# Copyright (C) 2004-2012 Free Software Foundation, Inc.
-#
-# This file is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# serial 3
-
-# _AM_PROG_TAR(FORMAT)
-# --------------------
-# Check how to create a tarball in format FORMAT.
-# FORMAT should be one of 'v7', 'ustar', or 'pax'.
-#
-# Substitute a variable $(am__tar) that is a command
-# writing to stdout a FORMAT-tarball containing the directory
-# $tardir.
-#     tardir=directory && $(am__tar) > result.tar
-#
-# Substitute a variable $(am__untar) that extract such
-# a tarball read from stdin.
-#     $(am__untar) < result.tar
-AC_DEFUN([_AM_PROG_TAR],
-[# Always define AMTAR for backward compatibility.  Yes, it's still used
-# in the wild :-(  We should find a proper way to deprecate it ...
-AC_SUBST([AMTAR], ['$${TAR-tar}'])
-m4_if([$1], [v7],
-     [am__tar='$${TAR-tar} chof - "$$tardir"' am__untar='$${TAR-tar} xf -'],
-     [m4_case([$1], [ustar],, [pax],,
-              [m4_fatal([Unknown tar format])])
-AC_MSG_CHECKING([how to create a $1 tar archive])
-# Loop over all known methods to create a tar archive until one works.
-_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none'
-_am_tools=${am_cv_prog_tar_$1-$_am_tools}
-# Do not fold the above two line into one, because Tru64 sh and
-# Solaris sh will not grok spaces in the rhs of '-'.
-for _am_tool in $_am_tools
-do
-  case $_am_tool in
-  gnutar)
-    for _am_tar in tar gnutar gtar;
-    do
-      AM_RUN_LOG([$_am_tar --version]) && break
-    done
-    am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"'
-    am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"'
-    am__untar="$_am_tar -xf -"
-    ;;
-  plaintar)
-    # Must skip GNU tar: if it does not support --format= it doesn't create
-    # ustar tarball either.
-    (tar --version) >/dev/null 2>&1 && continue
-    am__tar='tar chf - "$$tardir"'
-    am__tar_='tar chf - "$tardir"'
-    am__untar='tar xf -'
-    ;;
-  pax)
-    am__tar='pax -L -x $1 -w "$$tardir"'
-    am__tar_='pax -L -x $1 -w "$tardir"'
-    am__untar='pax -r'
-    ;;
-  cpio)
-    am__tar='find "$$tardir" -print | cpio -o -H $1 -L'
-    am__tar_='find "$tardir" -print | cpio -o -H $1 -L'
-    am__untar='cpio -i -H $1 -d'
-    ;;
-  none)
-    am__tar=false
-    am__tar_=false
-    am__untar=false
-    ;;
-  esac
-
-  # If the value was cached, stop now.  We just wanted to have am__tar
-  # and am__untar set.
-  test -n "${am_cv_prog_tar_$1}" && break
-
-  # tar/untar a dummy directory, and stop if the command works
-  rm -rf conftest.dir
-  mkdir conftest.dir
-  echo GrepMe > conftest.dir/file
-  AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar])
-  rm -rf conftest.dir
-  if test -s conftest.tar; then
-    AM_RUN_LOG([$am__untar <conftest.tar])
-    grep GrepMe conftest.dir/file >/dev/null 2>&1 && break
-  fi
-done
-rm -rf conftest.dir
-
-AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool])
-AC_MSG_RESULT([$am_cv_prog_tar_$1])])
-AC_SUBST([am__tar])
-AC_SUBST([am__untar])
-]) # _AM_PROG_TAR
-

config.h.in

@@ -1,87 +0,0 @@
-/* config.h.in.  Generated from configure.in by autoheader.  */
-
-/* Define to 1 if you have the <dirent.h> header file. */
-#undef HAVE_DIRENT_H
-
-/* Define to 1 if you have the <fcntl.h> header file. */
-#undef HAVE_FCNTL_H
-
-/* Define to 1 if you have the <fnmatch.h> header file. */
-#undef HAVE_FNMATCH_H
-
-/* Define to 1 if you have the <inttypes.h> header file. */
-#undef HAVE_INTTYPES_H
-
-/* Define to 1 if you have the <memory.h> header file. */
-#undef HAVE_MEMORY_H
-
-/* Define to 1 if you have the <ndir.h> header file, and it defines `DIR'. */
-#undef HAVE_NDIR_H
-
-/* Define to 1 if you have the <regex.h> header file. */
-#undef HAVE_REGEX_H
-
-/* Define to 1 if you have the <signal.h> header file. */
-#undef HAVE_SIGNAL_H
-
-/* Define to 1 if you have the <stdint.h> header file. */
-#undef HAVE_STDINT_H
-
-/* Define to 1 if you have the <stdio.h> header file. */
-#undef HAVE_STDIO_H
-
-/* Define to 1 if you have the <stdlib.h> header file. */
-#undef HAVE_STDLIB_H
-
-/* Define to 1 if you have the <strings.h> header file. */
-#undef HAVE_STRINGS_H
-
-/* Define to 1 if you have the <string.h> header file. */
-#undef HAVE_STRING_H
-
-/* Define to 1 if you have the <sys/dir.h> header file, and it defines `DIR'.
-   */
-#undef HAVE_SYS_DIR_H
-
-/* Define to 1 if you have the <sys/ndir.h> header file, and it defines `DIR'.
-   */
-#undef HAVE_SYS_NDIR_H
-
-/* Define to 1 if you have the <sys/stat.h> header file. */
-#undef HAVE_SYS_STAT_H
-
-/* Define to 1 if you have the <sys/types.h> header file. */
-#undef HAVE_SYS_TYPES_H
-
-/* Define to 1 if you have the <unistd.h> header file. */
-#undef HAVE_UNISTD_H
-
-/* Name of package */
-#undef PACKAGE
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* Define to 1 if you have the ANSI C header files. */
-#undef STDC_HEADERS
-
-/* Version number of package */
-#undef VERSION
-
-/* Define to empty if `const' does not conform to ANSI C. */
-#undef const

configure.in

@@ -1,42 +0,0 @@
-# Process this file with autoconf to produce a configure script.
-AC_INIT
-AC_CONFIG_SRCDIR([src/prtget.cpp])
-AM_INIT_AUTOMAKE(prt-get,5.19.5)
-
-
-dnl Determine default prefix
-test x$prefix = "xNONE" && prefix="$ac_default_prefix"
-
-# Checks for programs.
-AC_PROG_CXX
-AC_PROG_CC
-AC_PROG_INSTALL
-
-AC_PREFIX_DEFAULT(/usr)
-
-# Checks for libraries.
-
-# Checks for header files.
-AC_HEADER_DIRENT
-AC_CHECK_HEADERS(unistd.h stdio.h sys/types.h sys/stat.h fnmatch.h \ 
-                 dirent.h fcntl.h signal.h regex.h)
-
-CFLAGS="$CFLAGS $X_CFLAGS"
-CXXFLAGS="$CXXFLAGS $X_CFLAGS"
-LIBS="$LIBS $X_LIBS"
-LDFLAGS="$LDFLAGS $LIBS $X_PRE_LIBS"
-
-# Checks for typedefs, structures, and compiler characteristics.
-AC_C_CONST
-
-# I hate you autotools
-sysconfdir="/etc"
-localstatedir="/var"
-
-# Checks for library functions.
-AM_CONFIG_HEADER(config.h)
-AC_CONFIG_FILES([Makefile
-          src/Makefile
-          doc/Makefile
-          misc/Makefile])
-AC_OUTPUT

depcomp

@@ -1,423 +0,0 @@
-#! /bin/sh
-
-# depcomp - compile a program generating dependencies as side-effects
-# Copyright 1999, 2000 Free Software Foundation, Inc.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-# Originally written by Alexandre Oliva <oliva@dcc.unicamp.br>.
-
-if test -z "$depmode" || test -z "$source" || test -z "$object"; then
-  echo "depcomp: Variables source, object and depmode must be set" 1>&2
-  exit 1
-fi
-# `libtool' can also be set to `yes' or `no'.
-
-if test -z "$depfile"; then
-   base=`echo "$object" | sed -e 's,^.*/,,' -e 's,\.\([^.]*\)$,.P\1,'`
-   dir=`echo "$object" | sed 's,/.*$,/,'`
-   if test "$dir" = "$object"; then
-      dir=
-   fi
-   # FIXME: should be _deps on DOS.
-   depfile="$dir.deps/$base"
-fi
-
-tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`}
-
-rm -f "$tmpdepfile"
-
-# Some modes work just like other modes, but use different flags.  We
-# parameterize here, but still list the modes in the big case below,
-# to make depend.m4 easier to write.  Note that we *cannot* use a case
-# here, because this file can only contain one case statement.
-if test "$depmode" = hp; then
-  # HP compiler uses -M and no extra arg.
-  gccflag=-M
-  depmode=gcc
-fi
-
-if test "$depmode" = dashXmstdout; then
-   # This is just like dashmstdout with a different argument.
-   dashmflag=-xM
-   depmode=dashmstdout
-fi
-
-case "$depmode" in
-gcc3)
-## gcc 3 implements dependency tracking that does exactly what
-## we want.  Yay!  Note: for some reason libtool 1.4 doesn't like
-## it if -MD -MP comes after the -MF stuff.  Hmm.
-  "$@" -MT "$object" -MD -MP -MF "$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  mv "$tmpdepfile" "$depfile"
-  ;;
-
-gcc)
-## There are various ways to get dependency output from gcc.  Here's
-## why we pick this rather obscure method:
-## - Don't want to use -MD because we'd like the dependencies to end
-##   up in a subdir.  Having to rename by hand is ugly.
-##   (We might end up doing this anyway to support other compilers.)
-## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like
-##   -MM, not -M (despite what the docs say).
-## - Using -M directly means running the compiler twice (even worse
-##   than renaming).
-  if test -z "$gccflag"; then
-    gccflag=-MD,
-  fi
-  "$@" -Wp,"$gccflag$tmpdepfile"
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz
-## The second -e expression handles DOS-style file names with drive letters.
-  sed -e 's/^[^:]*: / /' \
-      -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile"
-## This next piece of magic avoids the `deleted header file' problem.
-## The problem is that when a header file which appears in a .P file
-## is deleted, the dependency causes make to die (because there is
-## typically no way to rebuild the header).  We avoid this by adding
-## dummy dependencies for each header file.  Too bad gcc doesn't do
-## this for us directly.
-  tr ' ' '
-' < "$tmpdepfile" |
-## Some versions of gcc put a space before the `:'.  On the theory
-## that the space means something, we add a space to the output as
-## well.
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-hp)
-  # This case exists only to let depend.m4 do its work.  It works by
-  # looking at the text of this script.  This case will never be run,
-  # since it is checked for above.
-  exit 1
-  ;;
-
-sgi)
-  if test "$libtool" = yes; then
-    "$@" "-Wp,-MDupdate,$tmpdepfile"
-  else
-    "$@" -MDupdate "$tmpdepfile"
-  fi
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-  rm -f "$depfile"
-
-  if test -f "$tmpdepfile"; then  # yes, the sourcefile depend on other files
-    echo "$object : \\" > "$depfile"
-
-    # Clip off the initial element (the dependent).  Don't try to be
-    # clever and replace this with sed code, as IRIX sed won't handle
-    # lines with more than a fixed number of characters (4096 in
-    # IRIX 6.2 sed, 8192 in IRIX 6.5).  We also remove comment lines;
-    # the IRIX cc adds comments like `#:fec' to the end of the
-    # dependency line.
-    tr ' ' '
-' < "$tmpdepfile" \
-    | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \
-    tr '
-' ' ' >> $depfile
-    echo >> $depfile
-
-    # The second pass generates a dummy entry for each header file.
-    tr ' ' '
-' < "$tmpdepfile" \
-   | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \
-   >> $depfile
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-aix)
-  # The C for AIX Compiler uses -M and outputs the dependencies
-  # in a .u file.  This file always lives in the current directory.
-  # Also, the AIX compiler puts `$object:' at the start of each line;
-  # $object doesn't have directory information.
-  stripped=`echo "$object" | sed -e 's,^.*/,,' -e 's/\(.*\)\..*$/\1/'`
-  tmpdepfile="$stripped.u"
-  outname="$stripped.o"
-  if test "$libtool" = yes; then
-    "$@" -Wc,-M
-  else
-    "$@" -M
-  fi
-
-  stat=$?
-  if test $stat -eq 0; then :
-  else
-    rm -f "$tmpdepfile"
-    exit $stat
-  fi
-
-  if test -f "$tmpdepfile"; then
-    # Each line is of the form `foo.o: dependent.h'.
-    # Do two passes, one to just change these to
-    # `$object: dependent.h' and one to simply `dependent.h:'.
-    sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile"
-    sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile"
-  else
-    # The sourcefile does not contain any dependencies, so just
-    # store a dummy comment line, to avoid errors with the Makefile
-    # "include basename.Plo" scheme.
-    echo "#dummy" > "$depfile"
-  fi
-  rm -f "$tmpdepfile"
-  ;;
-
-tru64)
-   # The Tru64 compiler uses -MD to generate dependencies as a side
-   # effect.  `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'.
-   # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put
-   # dependencies in `foo.d' instead, so we check for that too.
-   # Subdirectories are respected.
-   dir=`echo "$object" | sed -e 's|/[^/]*$|/|'`
-   test "x$dir" = "x$object" && dir=
-   base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'`
-
-   if test "$libtool" = yes; then
-      tmpdepfile1="$dir.libs/$base.lo.d"
-      tmpdepfile2="$dir.libs/$base.d"
-      "$@" -Wc,-MD
-   else
-      tmpdepfile1="$dir$base.o.d"
-      tmpdepfile2="$dir$base.d"
-      "$@" -MD
-   fi
-
-   stat=$?
-   if test $stat -eq 0; then :
-   else
-      rm -f "$tmpdepfile1" "$tmpdepfile2"
-      exit $stat
-   fi
-
-   if test -f "$tmpdepfile1"; then
-      tmpdepfile="$tmpdepfile1"
-   else
-      tmpdepfile="$tmpdepfile2"
-   fi
-   if test -f "$tmpdepfile"; then
-      sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile"
-      # That's a space and a tab in the [].
-      sed -e 's,^.*\.[a-z]*:[ 	]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile"
-   else
-      echo "#dummy" > "$depfile"
-   fi
-   rm -f "$tmpdepfile"
-   ;;
-
-#nosideeffect)
-  # This comment above is used by automake to tell side-effect
-  # dependency tracking mechanisms from slower ones.
-
-dashmstdout)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.  We will use -o /dev/null later,
-  # however we can't do the remplacement now because
-  # `-o $object' might simply not be used
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  test -z "$dashmflag" && dashmflag=-M
-  "$@" -o /dev/null $dashmflag | sed 's:^[^:]*\:[ 	]*:'"$object"'\: :' > "$tmpdepfile"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  tr ' ' '
-' < "$tmpdepfile" | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-dashXmstdout)
-  # This case only exists to satisfy depend.m4.  It is never actually
-  # run, as this mode is specially recognized in the preamble.
-  exit 1
-  ;;
-
-makedepend)
-  "$@" || exit $?
-  # X makedepend
-  shift
-  cleared=no
-  for arg in "$@"; do
-    case $cleared in
-    no)
-      set ""; shift
-      cleared=yes ;;
-    esac
-    case "$arg" in
-    -D*|-I*)
-      set fnord "$@" "$arg"; shift ;;
-    -*)
-      ;;
-    *)
-      set fnord "$@" "$arg"; shift ;;
-    esac
-  done
-  obj_suffix="`echo $object | sed 's/^.*\././'`"
-  touch "$tmpdepfile"
-  ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@"
-  rm -f "$depfile"
-  cat < "$tmpdepfile" > "$depfile"
-  sed '1,2d' "$tmpdepfile" | tr ' ' '
-' | \
-## Some versions of the HPUX 10.20 sed can't process this invocation
-## correctly.  Breaking it into two sed invocations is a workaround.
-    sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile" "$tmpdepfile".bak
-  ;;
-
-cpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout.
-  "$@" || exit $?
-
-  # Remove the call to Libtool.
-  if test "$libtool" = yes; then
-    while test $1 != '--mode=compile'; do
-      shift
-    done
-    shift
-  fi
-
-  # Remove `-o $object'.
-  IFS=" "
-  for arg
-  do
-    case $arg in
-    -o)
-      shift
-      ;;
-    $object)
-      shift
-      ;;
-    *)
-      set fnord "$@" "$arg"
-      shift # fnord
-      shift # $arg
-      ;;
-    esac
-  done
-
-  "$@" -E |
-    sed -n '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' |
-    sed '$ s: \\$::' > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  cat < "$tmpdepfile" >> "$depfile"
-  sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-msvisualcpp)
-  # Important note: in order to support this mode, a compiler *must*
-  # always write the proprocessed file to stdout, regardless of -o,
-  # because we must use -o when running libtool.
-  "$@" || exit $?
-  IFS=" "
-  for arg
-  do
-    case "$arg" in
-    "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI")
-	set fnord "$@"
-	shift
-	shift
-	;;
-    *)
-	set fnord "$@" "$arg"
-	shift
-	shift
-	;;
-    esac
-  done
-  "$@" -E |
-  sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile"
-  rm -f "$depfile"
-  echo "$object : \\" > "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::	\1 \\:p' >> "$depfile"
-  echo "	" >> "$depfile"
-  . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile"
-  rm -f "$tmpdepfile"
-  ;;
-
-none)
-  exec "$@"
-  ;;
-
-*)
-  echo "Unknown depmode $depmode" 1>&2
-  exit 1
-  ;;
-esac
-
-exit 0

doc/FS1843.md

@@ -0,0 +1,92 @@
+# Flyspray 1843 notes
+## Was: Re: Please make the output of prt-get --test more common
+
+teodor observed that prt-get --test gives two different styles of output.
+The output style was found to be affected by the number of packages requested 
+on the command line (one versus many), and by whether dependency resolution 
+was toggled (install versus depinst).
+
+In the case when one package was requested for installation, an early check 
+of /var/lib/pkg/db for the existence of a previous installation would alert the
+user to the malformed command. No such check of /var/lib/pkg/db was
+being performed for multiple packages passed on the command line (FS#1910), and
+so the program continued all the way through executeTransaction() and
+evaluateResult(), which produced the more verbose output that teodor noted.
+
+A similar discrepancy could be observed when requesting an **update** of **one** 
+package that was not previously installed, versus an update of **multiple**
+packages among which there are some not yet installed. You would have seen a
+terse warning in the first case, and a more verbose output in the second case.
+
+The softdeps branch in this code base is now more consistent in performing the 
+scan of /var/lib/pkg/db, no matter how many packages are passed as argument. 
+But the mixed-upinst branch collapses the distinction between install and 
+update, always bringing up to date all the ports passed as argument (and their
+dependencies, unless --nodeps is given), so it can postpone the scan of
+/var/lib/pkg/db until the step of customizing pkgadd flags for each target.
+Hence there is no corresponding code in the mixed-upinst branch to solve FS#1910 
+by exiting early with an error message.
+
+teodor's second observation is more interesting. During dependency resolution, 
+the invalid arguments (ports not found in the active repos) were silently being
+dropped, rather than being kept in memory for a post-transaction report. If
+**all** ports passed to a ``depinst`` command are nowhere among the active
+repositories, then the empty set is what gets used for executeTransaction(),
+with the predictable result "no package specified for install". Why did we see
+a different result when running ``install``? Because the calculateDependencies()
+method was never called, and so executeTransaction() received the entire list 
+of nowhere-to-be-found ports! Iterating through this list of nonexistent ports
+would populate the missingPackages list, which would then be displayed nicely 
+during the post-transaction summary. This side-effect of toggling dependency
+resolution could be observed in both the softdeps and the mixed-upinst branch,
+prior to the commits of 2023-09-15.
+
+Although we do populate a missingPackages list during calculateDependencies(), 
+the contents of this list were not being included in the post-transaction 
+summary. As the code was originally conceived, executeTransaction() would get
+a filtered list, with missing packages omitted. This side-effect of ``depinst``
+violates the principle of least surprise, because users like teodor might
+justifiably expect toggling dependency resolution to generate a superset of
+**their argument list** @ARGV, not just a superset of the valid ports in @ARGV.
+To be more faithful to the principle of least surprise, the softdeps branch now 
+propagates into executeTransaction() even the ports that are not in the repos, 
+so that the post-transaction summary can display them. The mixed-upinst branch
+does the same, but because it merges ``install`` and ``update``, any requested
+targets that are already installed and up-to-date will appear in the
+post-transaction summary under the header "Packages already installed before
+this run (ignored)".
+
+With dependency resolution enabled, the list of "Packages already installed
+before this run (ignored)" often fills up the entire height of a terminal.
+If we implemented teodor's suggestion and united the list of
+"Packages not found" with this list --- already often big enough on its own ---
+then readability of the post-transaction summary would suffer.
+Two separate lists would offer greater readability in most cases, both for
+the human eye and for a shell script.
+
+teodor's proposed heading for a united list, "The following ports were 
+not found/already installed:", did inspire a new way for the softdeps branch
+to handle FS#1910. All arguments to ``install`` and ``depinst`` will be tested 
+against /var/lib/pkg/db to ensure that they're not already installed, and if 
+all the tests fail then the user is immediately alerted to the malformed 
+command. This preliminary check is simply jw's original design, but extended 
+from one port to many. However, if any of the requested ports is not yet
+installed, we can go ahead with initRepo() and attempt a less ambitious
+transaction (limited to a subset of the user's argument list). The program
+will reach evaluateTransaction() and display what succeeded, as well as what 
+was wrong with the original command.
+
+The softdeps branch has no corresponding leniency in handling an ``update`` 
+command, because the typical scenario for using that command is after 
+running ``prt-get diff``, at which point the user can be expected to know 
+what's on their system and to pass as arguments only the names of packages 
+already installed. So the early exit behaviour of my previous solution to
+FS#1910 is retained for the ``update`` command. But it's easy to imagine a
+user passing invalid targets to an ``install`` command, in the absence of
+any cues from running ``prt-get listinst | grep -E 
+(package1|package2|...|packageN)``, and to handle that possibility it
+makes sense to parse leniently the arguments passed to ``install``. Users
+then obtain on the first try, most of what they intended, while also getting
+an informative list of already-installed packages in the post-transaction report.
+If they really intended to force the rebuild of those already-installed
+packages, they can issue a revised command after the first command succeeds.

doc/Makefile.am

@@ -1,10 +0,0 @@
-
-man_MANS = prt-get.8 prt-cache.8 prt-get.conf.5
-
-clean-local:
-	rm -rf *.log *.aux *.toc *.dvi *.idx *.pdf api 
-
-apidoc:
-	doxygen
-
-EXTRA_DIST = $(man_MANS) coding

doc/Makefile.in

@@ -1,492 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = doc
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/mkinstalldirs
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-man5dir = $(mandir)/man5
-am__installdirs = "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"
-man8dir = $(mandir)/man8
-NROFF = nroff
-MANS = $(man_MANS)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-man_MANS = prt-get.8 prt-cache.8 prt-get.conf.5
-EXTRA_DIST = $(man_MANS) coding
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu doc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-man5: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man5dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.5[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man5:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man5dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.5[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
-install-man8: $(man_MANS)
-	@$(NORMAL_INSTALL)
-	@list1=''; \
-	list2='$(man_MANS)'; \
-	test -n "$(man8dir)" \
-	  && test -n "`echo $$list1$$list2`" \
-	  || exit 0; \
-	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
-	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
-	{ for i in $$list1; do echo "$$i"; done;  \
-	if test -n "$$list2"; then \
-	  for i in $$list2; do echo "$$i"; done \
-	    | sed -n '/\.8[a-z]*$$/p'; \
-	fi; \
-	} | while read p; do \
-	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; echo "$$p"; \
-	done | \
-	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
-	sed 'N;N;s,\n, ,g' | { \
-	list=; while read file base inst; do \
-	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
-	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
-	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
-	  fi; \
-	done; \
-	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
-	while read files; do \
-	  test -z "$$files" || { \
-	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
-	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
-	done; }
-
-uninstall-man8:
-	@$(NORMAL_UNINSTALL)
-	@list=''; test -n "$(man8dir)" || exit 0; \
-	files=`{ for i in $$list; do echo "$$i"; done; \
-	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
-	  sed -n '/\.8[a-z]*$$/p'; \
-	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
-	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
-	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@list='$(MANS)'; if test -n "$$list"; then \
-	  list=`for p in $$list; do \
-	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
-	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
-	  if test -n "$$list" && \
-	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
-	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
-	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
-	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
-	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
-	    exit 1; \
-	  else :; fi; \
-	else :; fi
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(MANS)
-installdirs:
-	for dir in "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic clean-local mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am: install-man
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am:
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man: install-man5 install-man8
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-man
-
-uninstall-man: uninstall-man5 uninstall-man8
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic clean-local \
-	distclean distclean-generic distdir dvi dvi-am html html-am \
-	info info-am install install-am install-data install-data-am \
-	install-dvi install-dvi-am install-exec install-exec-am \
-	install-html install-html-am install-info install-info-am \
-	install-man install-man5 install-man8 install-pdf \
-	install-pdf-am install-ps install-ps-am install-strip \
-	installcheck installcheck-am installdirs maintainer-clean \
-	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
-	pdf-am ps ps-am uninstall uninstall-am uninstall-man \
-	uninstall-man5 uninstall-man8
-
-
-clean-local:
-	rm -rf *.log *.aux *.toc *.dvi *.idx *.pdf api 
-
-apidoc:
-	doxygen
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

doc/meson.build

@@ -0,0 +1 @@
+install_man(['prt-cache.8', 'prt-get.8', 'prt-get.conf.5'])

doc/prt-get.8

@@ -76,28 +76,36 @@ non-option argument passed. This is very similar to
 
 .TP 
 .B install [\-\-margs] [\-\-aargs] [\-\-log] <package1> [<package2> ...]
-install all packages in the listed order. Note that you can do this
+Install all packages in the listed order. Note that you can do this
 from any directory.
 
 .TP 
 .B depinst [\-\-margs] [\-\-aargs] [\-\-log] [\-\-softdeps] <package1> [<package2> ...]
-install all packages given on the command line, including their dependencies.
+Install all packages given on the command line, including their dependencies.
+Note that already-installed packages will be left at their current version,
+even if out of date. prt\-get depinst behaves this way because all of its
+child pkgadd processes will \fBlack\fP the \-u flag, which is needed when
+updating an already-installed package.
+
 Passing the --softdeps flag tells \fBprt-get\fP to consider also the optional 
-dependencies when sorting. Note that already-installed packages will be left 
-at their current version, even if out of date. prt\-get depinst behaves this 
-way because all of its child pkgadd processes will \fBlack\fP the \-u flag, 
-which is needed when updating an already-installed package.
+dependencies when sorting. The --softdeps flag does NOT affect the
+calculation of the minimal set of packages needed to satisfy the
+transaction; only hard dependencies are used when constructing this set. But
+if there are any optional dependency relationships among the ports in the
+resulting set, they will be respected when prt-get determines the sequence
+in which to build.
 
 .TP 
 .B update [\-\-margs] [\-\-aargs]  [\-\-log] <package1> [<package2> ...]
-update all packages listed in this order. Note: if the latest version of
-a package has acquired dependencies that were not needed by the currently-installed
-version and are not present on the system, the update command will not attempt to
-resolve this omission. prt-get update behaves this way because pkgadd invocations
-inherit the flag -u for every package in the transaction, causing an error if 
-the package is not already installed. You can follow the CRUX mailing list or the 
-IRC channels to stay informed of the situations where an update will require manual 
-intervention, or filter the output of
+Update all packages listed in this order. Note: if the latest version of a
+package has acquired dependencies that were not needed by the
+currently-installed version and are not present on the system, the update
+command will not attempt to resolve this omission. prt-get update behaves
+this way because pkgadd invocations inherit the flag -u for every package in
+the transaction, causing an error if the package is not already installed.
+You can follow the CRUX mailing list or the IRC channels to stay informed of
+the situations where an update will require manual intervention, or filter
+the output of
 .B prt\-get quickdep $(prt\-get quickdiff)
 through \fBprt\-get isinst\fP to get a list of packages suitable for an 
 \fBinstall\fP or \fBupdate\fP command.
@@ -105,7 +113,7 @@ See the \fBEXAMPLES\fP section below for details.
 
 .TP 
 .B remove <package1> [<package2> ...]
-remove packages listed in this order
+Remove packages listed in this order
 
 .TP 
 .B sysup [\-\-softdeps] [\-\-nodeps]
@@ -150,7 +158,7 @@ switch will slow down the operation remarkably.
 
 .TP 
 .B diff [\-\-all] [\-\-prefer\-higher] [<package1> <package2> ...]
-show differences between installed packages and ports in the ports
+Show differences between installed packages and ports in the ports
 tree. If arguments are given, shows only differences for these
 packages, otherwise all differences are shown. It's also possible to use
 shell-like
@@ -162,7 +170,7 @@ the ports tree, use the --prefer-higher option.
 
 .TP 
 .B quickdiff
-prints a simple list of packages which have a different version in the
+Print a simple list of packages which have a different version in the
 ports tree than what is installed. The output is sorted alphabetically, 
 but you can generate a (larger) list sorted by dependencies using
 .B prt\-get quickdep $(prt\-get quickdiff).
@@ -188,19 +196,18 @@ Search the ports tree (both name and description) for the pattern
 .B expr
 (which can be a shell-like wildcard pattern or a regexp). The search in
 the description is not case sensitive. Note that this requires prt\-get
-to read every Pkgfile, which makes it rather slow; if you like this,
-consider using the cache functionality, so you only have to spend this
-time once after updating the ports tree has been updated.
+to read every Pkgfile, which makes it rather slow. If you like searching by
+description, consider using the cache functionality, so you only have to
+read all the Pkgfiles after each update of the ports tree.
 
 .TP 
 .B fsearch [\-\-full] [\-\-regex] <pattern>
 Search the ports tree for
 .B pattern
 as file name in their footprint. When called without '--full', strips
-the directories from the file names before matching; this behaviour
-will change in prt-get 0.6, where full path search will be the
-default. Pattern can be a shell-like wildcard pattern (e.g. prt-get
-fsearch "*.h") or a regular expression (e.g. prt-get fsearch --regex 'liblz(o2|ma).*')
+the directories from the file names before matching. 
+Pattern can be a shell-like wildcard pattern (e.g. prt-get fsearch "*.h") 
+or a regular expression (e.g. prt-get fsearch --regex 'liblz(o2|ma).*')
 
 
 .TP 
@@ -217,18 +224,19 @@ Print the port's README file if it exists; if set, uses $PAGER
 
 .TP 
 .B depends [\-\-softdeps] <package1> [<package2> ...]
-print a recursive list of dependencies needed to install the packages passed
-as argument. It shows a list of the dependencies that were found in the ports tree,
-plus a list of the dependencies that could not be found. Pass the --softdeps flag
-if you want the sorting algorithm to consider optional dependencies too.
+Print a recursive list of dependencies needed to install the packages
+passed as argument. It shows a list of the dependencies that were found in
+the ports tree, plus a list of the dependencies that could not be found.
+Pass the --softdeps flag if you want the sorting algorithm to consider
+optional dependencies too.
 
 .TP 
 .B quickdep [\-\-softdeps] <package1> [<package2> ...]
-same output as \fBdepends\fP, but separated by spaces rather than newlines, and
-stripped of any dependencies that could not be found in the ports tree.
-Useful in case the list of dependencies is too large to fit on one screen, or
-if you don't want to filter out manually the ports that are invalid targets for
-installation. For example, instead of
+Same output as \fBdepends\fP, but separated by spaces rather than newlines,
+and stripped of any dependencies that could not be found in the ports tree.
+Useful in case the list of dependencies is too large to fit on one screen,
+or if you don't want to filter out manually the ports that are invalid
+targets for installation. For example, instead of
 .B prt\-get depinst xorg-server
 you might micromanage the process as follows:
 .B for i in $(prt\-get quickdep xorg-server); do if prt\-get isinst $i 2>/dev/null; then prt\-get update \-fr $i; else prt\-get install $i; fi; done
@@ -241,55 +249,77 @@ for successful builds.
 
 .TP 
 .B deptree [\-\-softdeps] <package>
-print a tree of the dependencies of the package
+Print a tree of the dependencies of the package
 .B <package>. 
-Pass the --softdeps flag to also show the installed packages that mention
+Pass the --softdeps flag to also show the installed packages that might
+have been eagerly linked, if they were present when
 .B <package>
-as an optional dependency.
+(or its dependencies) were built.
 Subtrees already shown are marked with '-->' to save some space. In
 order to show them all, add the --all switch.
 
 .SH ""
 
 .TP 
-.B dependent [\-\-softdeps] <package>
-print a list of ports which have
+.B dependent [\-\-recursive] [\-\-softdeps] [\-\-all] [\-\-tree] <package>
+Print a list of ports whose "Depends on:" line contains
 .B <package>
-in their "Depends on:" line. Use the --softdeps flag to also search the
-"Optional:" lines for \fB<package>\fP.
+(or its dependents, if --recursive was passed). Use the --softdeps flag to
+also search the "Optional:" lines for \fB<package>\fP.
  
-By default, output is restricted to ports that are installed. To see all hard 
-dependencies, add the --all switch; use --recursive to get a recursive list 
-(without duplication), and --tree to get a nicely indented one.
+By default, output is restricted to ports that are installed. To see all
+the dependencies, use the --all switch. Use --tree to get a nicely indented
+list.
 
 .TP 
 .B dup [-v] [format]
 List ports which can be found in multiple directories configured in
 .B /etc/prt-get.conf
-Use the verbose switch to simulate the output of version 5.12 and older (likely
-to go away in the future). The format string can be used to create user
-specified formats. The following symbols are currently replaced:
+Use the \fB\-v\fP switch to see a verbose report, which will show for each
+dup the port that takes precedence, and the port that is hidden (including
+full path and version info). The verbose switch is basically an alias for a
+particular combination of the recognized format symbols, namely
+
+.B '* %n\en   %p1 %v1 precedes over\en  %p2 %v2\en'.
+
+You can customize the output by passing a different format string, whose 
+symbols will be replaced as follows.
 
 .TP 
 \ \ \ \(bu
-%n \-> name of the port
+%n -> name of the port
 
 .TP 
 \ \ \ \(bu
-%p1 \-> Full path (including name) to port taking precendence
+%p1 -> Full path (including name) to port taking precedence
 
 .TP 
 \ \ \ \(bu
-%p2 \-> Full path (including name) to port being hidden
+%p2 -> Full path (including name) to port being hidden
 
 .TP 
 \ \ \ \(bu
-%v1 \-> Version of port taking precendence
+%v1 -> Version of port taking precedence
 
 .TP
 \ \ \ \(bu
-%v2 \-> Version of port being hidden
+%v2 -> Version of port being hidden
 
+.TP 
+\ \ \ \(bu
+%M1 -> maintainer of port taking precedence
+
+.TP
+\ \ \ \(bu
+%M2 -> maintainer of port being hidden
+
+.TP 
+\ \ \ \(bu
+%u1 -> URL of port taking precedence
+
+.TP
+\ \ \ \(bu
+%u2 -> URL of port being hidden
 
 .TP 
 .B list [\-v|\-vv] [\-\-path] [\-\-regex] [filter]
@@ -307,27 +337,27 @@ Print formatted port list format string can contain variables, which
 are replaced like this:
 .TP 
 \ \ \ \(bu
-%n \-> name
+%n -> name
 
 .TP 
 \ \ \ \(bu
-%p \-> path
+%p -> path
 
 .TP
 \ \ \ \(bu
-%v \-> version
+%v -> version
 
 .TP 
 \ \ \ \(bu
-%r \-> release
+%r -> release
 
 .TP 
 \ \ \ \(bu
-%d \-> description
+%d -> description
 
 .TP 
 \ \ \ \(bu
-%e \-> dependencies
+%e -> dependencies
 
 .TP 
 \ \ \ \(bu
@@ -335,7 +365,7 @@ are replaced like this:
 
 .TP 
 \ \ \ \(bu
-%u \-> URL
+%u -> URL
 
 .TP 
 \ \ \ \(bu
@@ -359,11 +389,11 @@ are replaced like this:
 
 .TP 
 \ \ \ \(bu
-%i \-> "no" if not installed, "yes" if it's installed and
+%i -> "no" if not installed, "yes" if it's installed and
 up to date and "diff" if it's installed and a new version is in the
 ports tree.
 
-Use "\\n" and "\\t" to format your output (no additional format specified
+Use "\\n" and "\\t" to format your output (no additional format symbols
 suported). The optional format string2 can contain the same variables
 as format string1 and is used to sort the output. You can specify a
 .B wildcard filter
@@ -374,16 +404,16 @@ to filter by package name.
 .B listinst [\-v|\-vv] [\-\-regex] [\-\-depsort] [filter]
 List installed ports. It's basically the same as
 .B pkginfo \-i,
-but omits version when called without verbose (\-v, \-vv) switch. Plus
-it is notably faster in my tests. \-v adds version information, \-vv
+but omits version when called without verbose (-v, -vv) switch. Plus
+it is notably faster in my tests. -v adds version information, -vv
 adds version and description.
 .B Warning:
-\-vv will slow down the process because it requires prt\-get to scan
+-vv will slow down the process because it requires prt-get to scan
 both the ports database and the ports tree.
 It's also possible to use shell-like
 .B wildcards
 for the listinst command. Make sure you escape where needed. By default
-it's sorted alphabetically; use the \-\-depsort switch to sort by
+it's sorted alphabetically; use the --depsort switch to sort by
 dependencies.
 
 .TP 
@@ -410,7 +440,7 @@ greater than 0.
 
 .TP
 .B current <package>
-Shows the currently-installed version of <package>, or a message
+Show the currently-installed version of <package>, or a message
 that <package> is not installed. Unlike
 .B prt\-get isinst package1 package2,
 this command does \fBnot\fP accept more than one package as argument. Use
@@ -419,11 +449,11 @@ to work around this limitation.
 
 .TP
 .B ls [\-\-path] <package>
-Prints out a listing of the port's directory
+List the contents of the port's directory
 
 .TP
 .B cat <package> [<file>]
-Prints out the file to stdout. If <file> is not specified, 'Pkgfile' is used. If set, uses $PAGER.
+Print the file to stdout. If <file> is not specified, 'Pkgfile' is used. If set, uses $PAGER.
 
 .TP
 .B edit <package> [<file>]
@@ -433,7 +463,7 @@ If <file> is not specified, 'Pkgfile' is used.
 
 .TP 
 .B help
-Shows a help screen
+Show a help screen
 
 .TP 
 .B dumpconfig
@@ -441,11 +471,11 @@ Dump the configuration to the current terminal
 
 .TP 
 .B version 
-Shows the current version of prt-get
+Show the current version of prt-get
 
 .TP 
 .B cache
-create a cache file from the ports tree to be used by prt-get using the
+Create a cache file from the ports tree to be used by prt-get using the
 --cache option. Remember to run prt-get cache each time you update the
 ports tree.
 
@@ -542,6 +572,14 @@ Execute post-install script if it's there
 .B \-\-install-scripts
 Execute pre-install and post-install script if they're there
 
+The options --pre-install, --post-install, and --install-scripts offer a
+convenient way to temporarily override the prt-get.conf directive 'runscripts
+no', which was the historical default. Starting with CRUX 3.7, prt-get.conf is
+being shipped with 'runscripts yes'. To override this default at the command
+line, you have to pass the more cumbersome option --config-set=\(dqrunscripts
+no\(dq, or point prt-get to an alternative configuration file using
+--config=<file>. (see below for the documentation of these options)
+
 .TP
 .B \-\-install-root=<dir>
 Use <dir> as root directory for your installation; allows you to install 
@@ -549,20 +587,41 @@ the requested packages onto a different directory than '/'. In daily usage,
 this option is not required; it's primarily interesting if you're developing 
 an independent installation.
 
+Pre- and post-install scripts will not be executed if the target root directory
+lacks a copy of the ports tree. So if you're maintaining an installation on a
+volume mounted somewhere other than '/', it's not enough to have the 
+line 'runscripts yes' in your prt-get.conf; you also have to ensure that
+the pre- and post-install scripts can be found in the same location
+relative to <dir>.
+
 The setting for --install-root determines which package database is used for 
 reading/writing (so <dir>/var/lib/pkg/db must exist), and where the pkg.tar.?z 
-archives get unpacked, but the relevant prt\-get.conf and ports tree are those 
+archives get unpacked, but the relevant prt-get.conf and ports tree are those 
 on the parent filesystem. Therefore it is not necessary for <dir> to contain 
-its own copy of the ports tree, or even a copy of prt-get.conf.
-However, if <dir>/etc/pkgadd.conf exists and is different from /etc/pkgadd.conf, 
-then install or update commands might behave unexpectedly. In order to preserve 
-the \fBpkgadd.conf(5)\fP settings from the host system, append the option 
---aargs='-c /etc/pkgadd.conf' to your \fBprt-get install\fP
-command, or just copy the desired directives into <dir>/etc/pkgadd.conf .
+its own copy of the ports tree (unless 'runscripts yes' is desired, as
+explained above). But each \fBpkgmk(8)\fP process will take place on the parent
+filesystem, inspecting \fIthe parent filesystem\fP's environment for
+information about installed ports and available shared libraries. The
+\fBpkgmk(8)\fP process might therefore draw the wrong conclusions about what
+functionality should be enabled for an installation to <dir>. If the parent
+filesystem is more richly populated than <dir>, with respect to installed
+packages, then the built package might exhibit breakage when \fBpkgadd\fP
+unpacks it into <dir>.
+
+When setting --install-root=<dir>, install or update commands might behave
+unexpectedly if <dir>/etc/pkgadd.conf exists and is different from
+/etc/pkgadd.conf . In order to preserve the \fBpkgadd.conf(5)\fP settings from
+the host system, append the option --aargs='-c /etc/pkgadd.conf' to your
+\fBprt-get install\fP command, or just copy the desired directives into
+<dir>/etc/pkgadd.conf .
 
 .TP 
 .B \-\-log
-Write build output to log file
+Write build output to log file. Basically a convenient alias for
+\fB\-\-config\-set=\(dqwritelog enabled\(dq\fP. Note that there is no similar
+alias allowing you to temporarily override the one configuration directive
+\(dqwritelog enabled\(dq; you have to resort to \fB\-\-config\-set=\(dqwritelog
+disabled\(dq\fP if that is your intention.
 
 .TP 
 .B \-\-no-std-config
@@ -582,7 +641,7 @@ Set <string> in configuration, overriding configuration file
 
 .TP 
 .B \-\-config=<file>
-Use alternative configuration file to read ports directories from
+Use <file> to read configuration directives, rather than /etc/prt-get.conf.
 
 .SH ""
 
@@ -627,31 +686,26 @@ Download, build and install irssi, with one simple command
 
 .TP 
 .B prt\-get install paper yasm
-Install paper and yasm. Abort with an informative error message if either package is already
-installed, allowing you to issue a revised command.
-
-.TP
-.B prt\-get update bmake cmake
-Update bmake and cmake. Abort with an informative error message if either package is not yet
-installed, allowing you to issue a revised command.
+Install paper and yasm. Abort with an informative error message if either
+package is already installed, allowing you to issue a revised command.
 
 .TP 
-.B prt\-get update -fr openssh
+.B prt\-get update \-fr openssh
 Update your current version of openssh, forcing a rebuild even if no version difference is detected.
 Useful if there was a major version change in one of its dependencies, and \fBrevdep openssh\fP
 indicates a broken package. :\-)
 
 .TP
-.B MISSLIBS=$(revdep -vvv mpv | awk -v FS=: '/(missing library)/ {print $3}'); [ -n \(dq${MISSLIBS[@]}\(dq ] && for i in ${MISSLIBS[@]}; do prt\-get fsearch $i; done
+.B MISSLIBS=$(revdep \-vvv mpv | awk \-v FS=: '/(missing library)/ {print $3}'); [ \-n \(dq${MISSLIBS[@]}\(dq ] && for i in ${MISSLIBS[@]}; do prt\-get fsearch $i; done
 (adapted from a script by ppetrov^) Check for the presence of the runtime libraries needed by mpv.
 If any are absent, search the footprints to determine which ports provide the missing libraries.
 
 .TP
-.B prt\-get isinst $(prt-get info ffmpeg | awk -v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}') | awk -v FS=\(dq \(dq '/not installed/ {print $2}'
+.B prt\-get isinst $(prt\-get info ffmpeg | awk \-v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}') | awk \-v FS=\(dq \(dq '/not installed/ {print $2}'
 Show all the optional dependencies of ffmpeg that are not currently installed.
 
 .TP
-.B prt\-get isinst $(prt-get info ffmpeg | awk -v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}') | awk -v FS=\(dq \(dq '/not installed/ {print $2}' | xargs prt\-get depinst \-\-group \-\-softdeps ffmpeg
+.B prt\-get isinst $(prt\-get info ffmpeg | awk \-v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}') | awk \-v FS=\(dq \(dq '/not installed/ {print $2}' | xargs prt\-get depinst \-\-group \-\-softdeps ffmpeg
 Extension of the above. Installs ffmpeg and all its optional dependencies, in
 the order that guarantees a maximal feature set. The --group flag tells
 \fBprt\-get\fP to abort the operation if any port fails to build, so as not to
@@ -659,7 +713,7 @@ spend any resources on ffmpeg until all of its optional dependencies are in
 place.
 
 .TP
-.B prt\-get isinst $(if grep -qE '^ffmpeg:' /etc/prt-get.softdeps 2>/dev/null; then grep -E '^ffmpeg:' /etc/prt-get.softdeps | cut -d: -f2 | tr ',' ' '; else prt-get info ffmpeg | awk -v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}'; fi) | awk -v FS=\(dq \(dq '/not installed/ {print $2}' | xargs prt\-get depinst \-\-group \-\-softdeps ffmpeg
+.B prt\-get isinst $(if grep \-qE '^ffmpeg:' /etc/prt\-get.softdeps 2>/dev/null; then grep \-E '^ffmpeg:' /etc/prt\-get.softdeps | cut \-d: \-f2 | tr ',' ' '; else prt\-get info ffmpeg | awk \-v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}'; fi) | awk \-v FS=\(dq \(dq '/not installed/ {print $2}' | xargs prt\-get depinst \-\-group \-\-softdeps ffmpeg
 Extension of the above (addressing a use case envisioned by ivandi). The
 user can create the file /etc/prt-get.softdeps containing a line like
 .B ffmpeg: x264 x265
@@ -679,12 +733,17 @@ Return a list of all ports whose names start with "mc", "nc", or "pc"
 Return a list of all ports having "irc" in their name or description
 
 .TP
-.B comm -13 <(ls /usr/ports/core) <(prt-get listorphans)
+.B prt\-get fsearch \-\-full \(dq/usr/etc/*\(dq | awk '/^Found in/ { $0=gensub(/Found in .*\e/(.+):/,\(dq\e\e1\(dq,\(dqg\(dq); print;}'
+Return a list of all ports that store their configs in /usr/etc. Omit the
+pipe to awk if you also want a detailed list of the files that matched.
+
+.TP
+.B comm \-13 <(ls /usr/ports/core) <(prt\-get listorphans)
 (based on comments from Romster and jue) Filter out the core ports from the list of orphans, in
 shells (like bash) that support process substitution
 
 .TP
-.B comm -13 <(cat ~/.keepers <(ls /usr/ports/core) | sort) <(prt\-get listorphans) | xargs prt\-get remove
+.B comm \-13 <(cat ~/.keepers <(ls /usr/ports/core) | sort) <(prt\-get listorphans) | xargs prt\-get remove
 (system-hosing extension of the above) A one-liner inspired by \fBpkg\-clean\fP
 and \fBpkgfoster\fP, but without the safeguard of interactivity. \fBDo not try this on a
 mission-critical system.\fP
@@ -702,21 +761,48 @@ Same as above, but only print the dependencies that are already installed. The o
 command is suitable for piping to \fBxargs prt\-get update\fP.
 
 .TP
-.B prt\-get printf \(dq%p\et%u\en\(dq | grep myrepo | cut -f 2
-Print the upstream URL for each port in the collection \(dqmyrepo\(dq, perhaps as the first step in
-keeping your personal overlay up to date.
+.B prt\-get isinst $(prt\-get quickdep i3) | awk '/not installed/ { print $2 }' | xargs prt\-get depinst \-\-softdeps \-\-test
+(inspired by a troubleshooting session with hestia) Assemble a set of install
+targets needed to build the i3 window manager; sort the list, respecting both
+hard and soft dependencies; then print how the installation would proceed. The
+awk filter in the middle is needed to prevent the command from failing with the
+error message "already installed".
 
 .TP
-.B prt\-get printf \(dq%M\et%n\en\(dq | grep ^Tim | wc -l
+.B comm \-3 <(prt\-get printf \(dq%i:%n %v\-%r\en\(dq | grep \-v ^no | cut \-d: \-f2 | sort) <(pkginfo \-i | sort)
+(inspired by a bug report from teodor) an alternative to \fBprt\-get diff\fP.
+In the output, left-justified lines show the version available in the
+repositories, while indented lines show the version installed. On a
+reasonably up-to-date system, the two processes in the above command will
+return many identical lines; these are suppressed by the -3 flag to
+\fBcomm(1)\fP.
+
+.TP
+.B for L in /var/log/pkgbuild/*.log; do P=${L%__*}; P=${P##*/}; VR=${L##*__}; VR=${VR%.log}; if ! prt\-get isinst $P >/dev/null; then mv $L /var/log/uninstalled; elif [ \(dq$(prt\-get current $P)\(dq != \(dq$VR\(dq ]; then mv $L /var/log/oldbuild/; fi; done
+(based on a feature request by samsep10l) a command you can put into a script
+called by root's crontab, in order to mimic Slackware's tidy directory listings 
+(the main logdir only contains build logs of the latest installed packages;
+other logs are moved to a separate directory). This particular command relies
+on declaring \(dqlogfile /var/log/pkgbuild/%n__%v-%r.log\(dq and \(dqwritelog
+enabled\(dq in \fBprt\-get.conf(5)\fP. Logs saved with a different filename
+pattern will require slight adjustments to the command.
+
+.TP
+.B prt\-get printf \(dq%p\et%u\en\(dq | awk '($1 ~ /\e/myrepo$/) { print $2 }'
+Print the upstream URL for each port in the collection \(dqmyrepo\(dq, perhaps 
+as the first step in keeping your personal overlay up to date.
+
+.TP
+.B prt\-get printf \(dq%M\et%n\en\(dq | grep \-c ^Tim
 Count how many ports our most-overworked core team member claims responsibility for.
 
 .TP 
-.B comm -13 <(prt\-get depends firefox-bin |tail -n +2 |sort) <(prt\-get depends firefox |tail -n +2 |sort)
+.B comm \-13 <(prt\-get depends firefox\-bin |tail \-n +2 |sort) <(prt\-get depends firefox |tail \-n +2 |sort)
 Find the build-time dependencies of firefox. Runtime dependencies would also appear in the list generated by
 the first process substitution, and \fBcomm -13\fP will suppress what the two lists have in common.
 
 .TP
-.B prt-get listinst \-\-depsort | xargs prt-get install \-\-install\-root=/mnt
+.B prt\-get listinst \-\-depsort | xargs prt\-get install \-\-install\-root=/mnt
 Sort the list of installed packages by dependencies, and then install all
 those packages onto a backup filesystem (mounted at /mnt). If you have a customized
 pkgadd.conf that you want applied to this operation, either copy it to 
@@ -724,7 +810,7 @@ pkgadd.conf that you want applied to this operation, either copy it to
 /etc/pkgadd.conf\(dq to the install command.
 
 .TP
-.B  prt-get list --path --regex '^xorg.*' | grep -v \(dq/usr/ports/xorg\(dq
+.B  prt\-get list \-\-path \-\-regex '^xorg.*' | grep \-v \(dq/usr/ports/xorg\(dq
 Show the ports whose names begin with xorg, but which appear outside the xorg port collection.
 (At the time of writing, this command returned at least two font ports.)
 

doc/prt-get.conf.5

@@ -20,7 +20,7 @@ It might look like this:
 # prt-get.conf
 
 # root directories
-prtdir /usr/ports/base
+prtdir /usr/ports/core
 prtdir /usr/ports/opt
 prtdir /usr/ports/contrib
 
@@ -39,23 +39,11 @@ logfile /tmp/log/%n.log
 
 # show compact readme information
 readme compact
-
-# execute pre- and post-installs scripts (default no)
-runscripts yes
-
-# don't prefer higher versions (default no)
-preferhigher yes
-
-# use regexps for searching (default no)
-useregex yes
-
-# consider soft dependencies when sorting the update/sysup targets
-softdeps no
 .fi
 
 .LP
-There are a few values to be configured: the location where to look
-for the ports, the location of the cache file, some log options and
+This example configures a few values: the location where to look
+for the ports, the location of the cache file, some log options, and
 how to notify the user about README files.
 
 If you don't specify the
@@ -63,22 +51,25 @@ cache file, the default location is
 .B /var/lib/pkg/prt-get.cache
 
 .LP
-Every line can contain one configuration option. The format of the lines
+Every line can contain one configuration option. The format of each line
 is
 .B <key> <value>.
-The valid keys are
-.B prtdir
-and
-.B cachefile.
+The keys that accept arbitrary strings as their value are
+.B prtdir,
+.B cachefile,
+.B logfile,
+and the
+.B *command
+keys (see below). Every other key must be given a value from a predetermined
+set (e.g., yes|no).
+
 The value for 
 .B prtdir 
-is a directory, the value for
+is a directory; the value for
 .B cachefile
-is a file to be used as cache
+is the file to be used as cache.
 
-.nf
-<portname1>:<dependency1> <dependency2>
-<portname2>:<dependency1>
+.SH Boolean keys
 
 .B runscripts
 if set to yes, execute pre- and post-install scripts
@@ -91,66 +82,88 @@ influence diff, quickdiff and sysup
 .B useregex
 if set to yes, prt-get will interpret search and filter patterns in
 list, listinst, printf, search, dsearch and fsearch as regular
-expressions. This will be the default in prt-get 0.6.
+expressions.
 
 .B softdeps
 if set to yes, during an update operation prt-get will perform a greedy search
 of the dependency graph, visiting any \fBinstalled\fP optional dependency of
-the ports specified on the command line and recursing until either a leaf node is
-found (port that doesn't depend on anything else) or a cycle is created. If a
-cycle is \fBnot\fP created by following a soft dependency, then this dependency
-relationship is added to the list of edges, and topological sort of the
-resulting graph can proceed as usual. The default is \fBsoftdeps no\fP, which
-means prt-get will only consider hard dependencies when walking the directed
-graph.
+the ports specified on the command line and recursing until either a leaf
+node is found (port that doesn't depend on anything else) or a cycle is
+created. If a cycle is \fBnot\fP created by following a soft dependency,
+then this dependency relationship is added to the list of edges, and
+topological sort of the resulting graph can proceed as usual. The default is
+\fBsoftdeps no\fP, which means prt-get will only consider hard dependencies
+when walking the directed graph.
 
-.LP
-.B makecommand
-.B addcommand
-.B removecommand
+.SH Overriding default commands
+
+.B makecommand,
+.B addcommand,
+.B removecommand,
+and
 .B runscriptcommand
-can be used to use an alternate command instead of 'pkgmk' for the
-makecommand,'pkgadd' for the addcommand, 'pkgrm' for the
-removecommand and 'sh' for the command which is used to run the pre- and
-post-install scripts. These are expert options which shouldn't be used
-in general; when used the wrong way, they can completely break prt-get's
-original functionality.
+can be given to override the defaults ('pkgmk' for the makecommand, 'pkgadd'
+for the addcommand, 'pkgrm' for the removecommand and 'sh' for the
+interpreter of pre- and post-install scripts). These are expert options
+which should not be used in general; when used the wrong way, they can
+completely break prt-get's original functionality.
 
+.SH Keys that control logging
 
-
-.LP
-The log options are
 .B writelog
 which can be set to 'enabled' or 'disabled'
+
 .B logmode
 which can be set to 'append' or 'overwrite'
+
 .B rmlog_on_success
 which can be set to 'yes' or 'no'; when set to yes, log files of 
 successful builds will be removed
+
 .B logfile
-which represent the file path. All occurances of %n in logfile are
-replaced with the port name and all occurances of  %p are
-replaced with the port's path, e.g. for port gcc in base, %p would be
-.B /usr/base
-and %n
+a template for the path where logs get saved. All occurences of %n in
+logfile are replaced with the port name and all occurences of %p are
+replaced with the port's path, e.g. for port gcc in core, %p would be
+.B /usr/ports/core
+and %n would be
 .B gcc.
 This allows you to have separate log files per port.
+Separate log files for each version and release can be achieved
+using the placeholders %v and %r, respectively. But if you want to enable
+\fBrmlog_on_uninst\fP, it is best to avoid %p, %v, and %r when specifying
+\fBlogfile\fP (as explained below).
+
+.B rmlog_on_uninst
+which can be set to 'yes' or 'no'; when set to yes, uninstalling a 
+package will also try to delete its build log. Replacements in the template 
+\fBlogfile\fP will be made using the \fIcurrent values\fP from the database
+of installed packages, and from the active repositories. If log files exist
+with different values of %p, %v, or %r than what the database and repositories
+provide, then the pattern substitutions will fail to match the names of those
+logs, and this feature will be a no-op. For example, suppose you specify the
+logfile pattern \(dq%p/.buildlogs/%n-%v-%r.log\(dq, and you have a package
+installed on your system through many versions, or after it has been
+moved from opt to contrib. Uninstalling that package would leave behind all the
+build logs except the latest. This pattern is also fragile with respect to
+repository purges; if one of your installed ports is dropped from the official
+repos, then either \(dq%p\(dq will expand to the path of your personal overlay
+(you did make a copy, right?), or it will not expand at all! See the EXAMPLES 
+section of \fBprt\-get(8)\fP for an alternative way to tidy up your directory
+of build logs.
 
-.LP
-If the readme option is set to something different than 'disabled',
-prt-get will notify the user if she/he installs a port with a README
-file. The option to configure this is called
 .B readme
-which can be set to 'verbose' (print separate information about README
-files), 'compact' (integrate in result output) or 'disabled' (no information about README files). See
-.B prt-get(8)
+can be set to 'disabled', to suppress the notification after
+installing a port with a README file; 'compact', to collect all the READMEs
+into one post-transaction output; or 'verbose', to print separate
+information about each port with a README file. See
+.B prt\-get(8)
 and especially the readme command how to read those README files using
-prt-get
+prt-get.
 
 .LP
-The order of the prtdir options is important, as if a port is in multiple
+The order of the prtdir options is important: if a port is in multiple
 directories, prt-get will use the one found first (directories listed
-first have precedence)
+first have precedence).
 
 .LP
 If you want to restrict the ports used from one prtdir, you can
@@ -158,13 +171,13 @@ append a comma separated list of ports to be used after the path,
 using a colon (':') character to separate the two components
 .B path:package1, package2,...
 Note that this slows down prt-get a lot if you list a lot of packages.
-If you become aware of speed problems due to this, create a separate
-ports directory instead and use symlinks for the ports you want to use
+If you become aware of speed problems due to this feature, create a separate
+ports directory instead and fill it with symlinks to the ports you want.
 
 .LP
 You can write comments after a '#' character. If you have '#'
-characters in you pathes, there's no way to escape them (as there is no
-way to escape ':' characters). Complain to the author if this is a 
+characters in your paths, there's no way to escape them (likewise there is 
+no way to escape ':' characters). Complain to the author if this is a 
 problem :-)
 
 

install-sh

@@ -1,276 +0,0 @@
-#!/bin/sh
-#
-# install - install a program, script, or datafile
-# This comes from X11R5 (mit/util/scripts/install.sh).
-#
-# Copyright 1991 by the Massachusetts Institute of Technology
-#
-# Permission to use, copy, modify, distribute, and sell this software and its
-# documentation for any purpose is hereby granted without fee, provided that
-# the above copyright notice appear in all copies and that both that
-# copyright notice and this permission notice appear in supporting
-# documentation, and that the name of M.I.T. not be used in advertising or
-# publicity pertaining to distribution of the software without specific,
-# written prior permission.  M.I.T. makes no representations about the
-# suitability of this software for any purpose.  It is provided "as is"
-# without express or implied warranty.
-#
-# Calling this script install-sh is preferred over install.sh, to prevent
-# `make' implicit rules from creating a file called install from it
-# when there is no Makefile.
-#
-# This script is compatible with the BSD install script, but was written
-# from scratch.  It can only install one file at a time, a restriction
-# shared with many OS's install programs.
-
-
-# set DOITPROG to echo to test this script
-
-# Don't use :- since 4.3BSD and earlier shells don't like it.
-doit="${DOITPROG-}"
-
-
-# put in absolute paths if you don't have them in your path; or use env. vars.
-
-mvprog="${MVPROG-mv}"
-cpprog="${CPPROG-cp}"
-chmodprog="${CHMODPROG-chmod}"
-chownprog="${CHOWNPROG-chown}"
-chgrpprog="${CHGRPPROG-chgrp}"
-stripprog="${STRIPPROG-strip}"
-rmprog="${RMPROG-rm}"
-mkdirprog="${MKDIRPROG-mkdir}"
-
-transformbasename=""
-transform_arg=""
-instcmd="$mvprog"
-chmodcmd="$chmodprog 0755"
-chowncmd=""
-chgrpcmd=""
-stripcmd=""
-rmcmd="$rmprog -f"
-mvcmd="$mvprog"
-src=""
-dst=""
-dir_arg=""
-
-while [ x"$1" != x ]; do
-    case $1 in
-	-c) instcmd=$cpprog
-	    shift
-	    continue;;
-
-	-d) dir_arg=true
-	    shift
-	    continue;;
-
-	-m) chmodcmd="$chmodprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-o) chowncmd="$chownprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-g) chgrpcmd="$chgrpprog $2"
-	    shift
-	    shift
-	    continue;;
-
-	-s) stripcmd=$stripprog
-	    shift
-	    continue;;
-
-	-t=*) transformarg=`echo $1 | sed 's/-t=//'`
-	    shift
-	    continue;;
-
-	-b=*) transformbasename=`echo $1 | sed 's/-b=//'`
-	    shift
-	    continue;;
-
-	*)  if [ x"$src" = x ]
-	    then
-		src=$1
-	    else
-		# this colon is to work around a 386BSD /bin/sh bug
-		:
-		dst=$1
-	    fi
-	    shift
-	    continue;;
-    esac
-done
-
-if [ x"$src" = x ]
-then
-	echo "$0: no input file specified" >&2
-	exit 1
-else
-	:
-fi
-
-if [ x"$dir_arg" != x ]; then
-	dst=$src
-	src=""
-
-	if [ -d "$dst" ]; then
-		instcmd=:
-		chmodcmd=""
-	else
-		instcmd=$mkdirprog
-	fi
-else
-
-# Waiting for this to be detected by the "$instcmd $src $dsttmp" command
-# might cause directories to be created, which would be especially bad
-# if $src (and thus $dsttmp) contains '*'.
-
-	if [ -f "$src" ] || [ -d "$src" ]
-	then
-		:
-	else
-		echo "$0: $src does not exist" >&2
-		exit 1
-	fi
-
-	if [ x"$dst" = x ]
-	then
-		echo "$0: no destination specified" >&2
-		exit 1
-	else
-		:
-	fi
-
-# If destination is a directory, append the input filename; if your system
-# does not like double slashes in filenames, you may need to add some logic
-
-	if [ -d "$dst" ]
-	then
-		dst=$dst/`basename "$src"`
-	else
-		:
-	fi
-fi
-
-## this sed command emulates the dirname command
-dstdir=`echo "$dst" | sed -e 's,[^/]*$,,;s,/$,,;s,^$,.,'`
-
-# Make sure that the destination directory exists.
-#  this part is taken from Noah Friedman's mkinstalldirs script
-
-# Skip lots of stat calls in the usual case.
-if [ ! -d "$dstdir" ]; then
-defaultIFS='
-	'
-IFS="${IFS-$defaultIFS}"
-
-oIFS=$IFS
-# Some sh's can't handle IFS=/ for some reason.
-IFS='%'
-set - `echo "$dstdir" | sed -e 's@/@%@g' -e 's@^%@/@'`
-IFS=$oIFS
-
-pathcomp=''
-
-while [ $# -ne 0 ] ; do
-	pathcomp=$pathcomp$1
-	shift
-
-	if [ ! -d "$pathcomp" ] ;
-        then
-		$mkdirprog "$pathcomp"
-	else
-		:
-	fi
-
-	pathcomp=$pathcomp/
-done
-fi
-
-if [ x"$dir_arg" != x ]
-then
-	$doit $instcmd "$dst" &&
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dst"; else : ; fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dst"; else : ; fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dst"; else : ; fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dst"; else : ; fi
-else
-
-# If we're going to rename the final executable, determine the name now.
-
-	if [ x"$transformarg" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		dstfile=`basename "$dst" $transformbasename |
-			sed $transformarg`$transformbasename
-	fi
-
-# don't allow the sed command to completely eliminate the filename
-
-	if [ x"$dstfile" = x ]
-	then
-		dstfile=`basename "$dst"`
-	else
-		:
-	fi
-
-# Make a couple of temp file names in the proper directory.
-
-	dsttmp=$dstdir/#inst.$$#
-	rmtmp=$dstdir/#rm.$$#
-
-# Trap to clean up temp files at exit.
-
-	trap 'status=$?; rm -f "$dsttmp" "$rmtmp" && exit $status' 0
-	trap '(exit $?); exit' 1 2 13 15
-
-# Move or copy the file name to the temp name
-
-	$doit $instcmd "$src" "$dsttmp" &&
-
-# and set any options; do chmod last to preserve setuid bits
-
-# If any of these fail, we abort the whole thing.  If we want to
-# ignore errors from any of these, just make sure not to ignore
-# errors from the above "$doit $instcmd $src $dsttmp" command.
-
-	if [ x"$chowncmd" != x ]; then $doit $chowncmd "$dsttmp"; else :;fi &&
-	if [ x"$chgrpcmd" != x ]; then $doit $chgrpcmd "$dsttmp"; else :;fi &&
-	if [ x"$stripcmd" != x ]; then $doit $stripcmd "$dsttmp"; else :;fi &&
-	if [ x"$chmodcmd" != x ]; then $doit $chmodcmd "$dsttmp"; else :;fi &&
-
-# Now remove or move aside any old file at destination location.  We try this
-# two ways since rm can't unlink itself on some systems and the destination
-# file might be busy for other reasons.  In this case, the final cleanup
-# might fail but the new file should still install successfully.
-
-{
-	if [ -f "$dstdir/$dstfile" ]
-	then
-		$doit $rmcmd -f "$dstdir/$dstfile" 2>/dev/null ||
-		$doit $mvcmd -f "$dstdir/$dstfile" "$rmtmp" 2>/dev/null ||
-		{
-		  echo "$0: cannot unlink or rename $dstdir/$dstfile" >&2
-		  (exit 1); exit
-		}
-	else
-		:
-	fi
-} &&
-
-# Now rename the file to the real destination.
-
-	$doit $mvcmd "$dsttmp" "$dstdir/$dstfile"
-
-fi &&
-
-# The final little trick to "correctly" pass the exit status to the exit trap.
-
-{
-	(exit 0); exit
-}

meson.build

@@ -0,0 +1,14 @@
+project('prt-get', 'cpp',
+  version : '5.19.7',
+  default_options : ['warning_level=3', 'cpp_std=c++14'])
+
+myconf = configuration_data()
+myconf.set_quoted('VERSION', meson.project_version())
+myconf.set_quoted('SYSCONFDIR','/etc')
+myconf.set_quoted('LOCALSTATEDIR','/var')
+configure_file(output : 'config.h',
+  configuration : myconf)
+myconf_dir = include_directories('.')
+
+subdir('src')
+subdir('doc')

misc/Makefile.am

@@ -1,4 +0,0 @@
-EXTRA_DIST = prt-get_complete prt-get.aliases prt-get.deplist prt-get.conf
-
-sysconf_DATA = prt-get.conf
-

misc/Makefile.in

@@ -1,403 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-subdir = misc
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/mkinstalldirs
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-SOURCES =
-DIST_SOURCES =
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
-am__vpath_adj = case $$p in \
-    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
-    *) f=$$p;; \
-  esac;
-am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
-am__install_max = 40
-am__nobase_strip_setup = \
-  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
-am__nobase_strip = \
-  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
-am__nobase_list = $(am__nobase_strip_setup); \
-  for p in $$list; do echo "$$p $$p"; done | \
-  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
-  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
-    if (++n[$$2] == $(am__install_max)) \
-      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
-    END { for (dir in files) print dir, files[dir] }'
-am__base_list = \
-  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
-  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
-am__uninstall_files_from_dir = { \
-  test -z "$$files" \
-    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
-    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
-         $(am__cd) "$$dir" && rm -f $$files; }; \
-  }
-am__installdirs = "$(DESTDIR)$(sysconfdir)"
-DATA = $(sysconf_DATA)
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-EXTRA_DIST = prt-get_complete prt-get.aliases prt-get.deplist prt-get.conf
-sysconf_DATA = prt-get.conf
-all: all-am
-
-.SUFFIXES:
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu misc/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu misc/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-sysconfDATA: $(sysconf_DATA)
-	@$(NORMAL_INSTALL)
-	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \
-	fi; \
-	for p in $$list; do \
-	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
-	  echo "$$d$$p"; \
-	done | $(am__base_list) | \
-	while read files; do \
-	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
-	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
-	done
-
-uninstall-sysconfDATA:
-	@$(NORMAL_UNINSTALL)
-	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
-	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
-	dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
-tags: TAGS
-TAGS:
-
-ctags: CTAGS
-CTAGS:
-
-cscope cscopelist:
-
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(DATA)
-installdirs:
-	for dir in "$(DESTDIR)$(sysconfdir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -f Makefile
-distclean-am: clean-am distclean-generic
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-sysconfDATA
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-sysconfDATA
-
-.MAKE: install-am install-strip
-
-.PHONY: all all-am check check-am clean clean-generic distclean \
-	distclean-generic distdir dvi dvi-am html html-am info info-am \
-	install install-am install-data install-data-am install-dvi \
-	install-dvi-am install-exec install-exec-am install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip install-sysconfDATA installcheck installcheck-am \
-	installdirs maintainer-clean maintainer-clean-generic \
-	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
-	uninstall-am uninstall-sysconfDATA
-
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

misc/meson.build

@@ -0,0 +1,9 @@
+install_data(['prt-get.conf', 'prt-get.aliases'],
+  install_dir : '/etc',
+  install_mode : 'rw-r--r--')
+
+install_data(['prt-get_complete','prt-get_complete_zsh'],
+  install_dir : get_option('prefix') / 'share',
+  install_mode : 'rw-r--r--',
+  rename : ['bash_completion/completions/prt-get',
+    'zsh/site-functions/_prt-get'])

misc/prt-get.conf

@@ -17,10 +17,11 @@ prtdir /usr/ports/opt
 ### log options:
 # writelog enabled         # (enabled|disabled)
 # logmode  overwrite       # (append|overwrite)
-# rm_on_success no         # (yes|no)
+# rmlog_on_success no      # (yes|no)
+# rmlog_on_uninst no       # (yes|no)
 logfile  /var/log/pkgbuild/%n.log
-                           # path, %p=path to port dir, %n=port name
-                           #       %v=version, %r=release
+                           # %n=port name, %v=version, %r=release
+                           # %p=path to repository
 
 ### print README information:
 # readme verbose           # (verbose|compact|disabled)

missing

@@ -1,336 +0,0 @@
-#! /bin/sh
-# Common stub for a few missing GNU programs while installing.
-# Copyright (C) 1996, 1997, 1999, 2000, 2002 Free Software Foundation, Inc.
-# Originally by Fran,cois Pinard <pinard@iro.umontreal.ca>, 1996.
-
-# This program is free software; you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2, or (at your option)
-# any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA
-# 02111-1307, USA.
-
-# As a special exception to the GNU General Public License, if you
-# distribute this file as part of a program that contains a
-# configuration script generated by Autoconf, you may include it under
-# the same distribution terms that you use for the rest of that program.
-
-if test $# -eq 0; then
-  echo 1>&2 "Try \`$0 --help' for more information"
-  exit 1
-fi
-
-run=:
-
-# In the cases where this matters, `missing' is being run in the
-# srcdir already.
-if test -f configure.ac; then
-  configure_ac=configure.ac
-else
-  configure_ac=configure.in
-fi
-
-case "$1" in
---run)
-  # Try to run requested program, and just exit if it succeeds.
-  run=
-  shift
-  "$@" && exit 0
-  ;;
-esac
-
-# If it does not exist, or fails to run (possibly an outdated version),
-# try to emulate it.
-case "$1" in
-
-  -h|--h|--he|--hel|--help)
-    echo "\
-$0 [OPTION]... PROGRAM [ARGUMENT]...
-
-Handle \`PROGRAM [ARGUMENT]...' for when PROGRAM is missing, or return an
-error status if there is no known handling for PROGRAM.
-
-Options:
-  -h, --help      display this help and exit
-  -v, --version   output version information and exit
-  --run           try to run the given command, and emulate it if it fails
-
-Supported PROGRAM values:
-  aclocal      touch file \`aclocal.m4'
-  autoconf     touch file \`configure'
-  autoheader   touch file \`config.h.in'
-  automake     touch all \`Makefile.in' files
-  bison        create \`y.tab.[ch]', if possible, from existing .[ch]
-  flex         create \`lex.yy.c', if possible, from existing .c
-  help2man     touch the output file
-  lex          create \`lex.yy.c', if possible, from existing .c
-  makeinfo     touch the output file
-  tar          try tar, gnutar, gtar, then tar without non-portable flags
-  yacc         create \`y.tab.[ch]', if possible, from existing .[ch]"
-    ;;
-
-  -v|--v|--ve|--ver|--vers|--versi|--versio|--version)
-    echo "missing 0.4 - GNU automake"
-    ;;
-
-  -*)
-    echo 1>&2 "$0: Unknown \`$1' option"
-    echo 1>&2 "Try \`$0 --help' for more information"
-    exit 1
-    ;;
-
-  aclocal*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acinclude.m4' or \`${configure_ac}'.  You might want
-         to install the \`Automake' and \`Perl' packages.  Grab them from
-         any GNU archive site."
-    touch aclocal.m4
-    ;;
-
-  autoconf)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`${configure_ac}'.  You might want to install the
-         \`Autoconf' and \`GNU m4' packages.  Grab them from any GNU
-         archive site."
-    touch configure
-    ;;
-
-  autoheader)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`acconfig.h' or \`${configure_ac}'.  You might want
-         to install the \`Autoconf' and \`GNU m4' packages.  Grab them
-         from any GNU archive site."
-    files=`sed -n 's/^[ ]*A[CM]_CONFIG_HEADER(\([^)]*\)).*/\1/p' ${configure_ac}`
-    test -z "$files" && files="config.h"
-    touch_files=
-    for f in $files; do
-      case "$f" in
-      *:*) touch_files="$touch_files "`echo "$f" |
-				       sed -e 's/^[^:]*://' -e 's/:.*//'`;;
-      *) touch_files="$touch_files $f.in";;
-      esac
-    done
-    touch $touch_files
-    ;;
-
-  automake*)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified \`Makefile.am', \`acinclude.m4' or \`${configure_ac}'.
-         You might want to install the \`Automake' and \`Perl' packages.
-         Grab them from any GNU archive site."
-    find . -type f -name Makefile.am -print |
-	   sed 's/\.am$/.in/' |
-	   while read f; do touch "$f"; done
-    ;;
-
-  autom4te)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.
-         You can get \`$1Help2man' as part of \`Autoconf' from any GNU
-         archive site."
-
-    file=`echo "$*" | sed -n 's/.*--output[ =]*\([^ ]*\).*/\1/p'`
-    test -z "$file" && file=`echo "$*" | sed -n 's/.*-o[ ]*\([^ ]*\).*/\1/p'`
-    if test -f "$file"; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo "#! /bin/sh"
-	echo "# Created by GNU Automake missing as a replacement of"
-	echo "#  $ $@"
-	echo "exit 0"
-	chmod +x $file
-	exit 1
-    fi
-    ;;
-
-  bison|yacc)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.y' file.  You may need the \`Bison' package
-         in order for those modifications to take effect.  You can get
-         \`Bison' from any GNU archive site."
-    rm -f y.tab.c y.tab.h
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.y)
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.c
-	    fi
-	    SRCFILE=`echo "$LASTARG" | sed 's/y$/h/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" y.tab.h
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f y.tab.h ]; then
-	echo >y.tab.h
-    fi
-    if [ ! -f y.tab.c ]; then
-	echo 'main() { return 0; }' >y.tab.c
-    fi
-    ;;
-
-  lex|flex)
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.l' file.  You may need the \`Flex' package
-         in order for those modifications to take effect.  You can get
-         \`Flex' from any GNU archive site."
-    rm -f lex.yy.c
-    if [ $# -ne 1 ]; then
-        eval LASTARG="\${$#}"
-	case "$LASTARG" in
-	*.l)
-	    SRCFILE=`echo "$LASTARG" | sed 's/l$/c/'`
-	    if [ -f "$SRCFILE" ]; then
-	         cp "$SRCFILE" lex.yy.c
-	    fi
-	  ;;
-	esac
-    fi
-    if [ ! -f lex.yy.c ]; then
-	echo 'main() { return 0; }' >lex.yy.c
-    fi
-    ;;
-
-  help2man)
-    if test -z "$run" && ($1 --version) > /dev/null 2>&1; then
-       # We have it, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-	 you modified a dependency of a manual page.  You may need the
-	 \`Help2man' package in order for those modifications to take
-	 effect.  You can get \`Help2man' from any GNU archive site."
-
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-	file=`echo "$*" | sed -n 's/.*--output=\([^ ]*\).*/\1/p'`
-    fi
-    if [ -f "$file" ]; then
-	touch $file
-    else
-	test -z "$file" || exec >$file
-	echo ".ab help2man is required to generate this page"
-	exit 1
-    fi
-    ;;
-
-  makeinfo)
-    if test -z "$run" && (makeinfo --version) > /dev/null 2>&1; then
-       # We have makeinfo, but it failed.
-       exit 1
-    fi
-
-    echo 1>&2 "\
-WARNING: \`$1' is missing on your system.  You should only need it if
-         you modified a \`.texi' or \`.texinfo' file, or any other file
-         indirectly affecting the aspect of the manual.  The spurious
-         call might also be the consequence of using a buggy \`make' (AIX,
-         DU, IRIX).  You might want to install the \`Texinfo' package or
-         the \`GNU make' package.  Grab either from any GNU archive site."
-    file=`echo "$*" | sed -n 's/.*-o \([^ ]*\).*/\1/p'`
-    if test -z "$file"; then
-      file=`echo "$*" | sed 's/.* \([^ ]*\) *$/\1/'`
-      file=`sed -n '/^@setfilename/ { s/.* \([^ ]*\) *$/\1/; p; q; }' $file`
-    fi
-    touch $file
-    ;;
-
-  tar)
-    shift
-    if test -n "$run"; then
-      echo 1>&2 "ERROR: \`tar' requires --run"
-      exit 1
-    fi
-
-    # We have already tried tar in the generic part.
-    # Look for gnutar/gtar before invocation to avoid ugly error
-    # messages.
-    if (gnutar --version > /dev/null 2>&1); then
-       gnutar "$@" && exit 0
-    fi
-    if (gtar --version > /dev/null 2>&1); then
-       gtar "$@" && exit 0
-    fi
-    firstarg="$1"
-    if shift; then
-	case "$firstarg" in
-	*o*)
-	    firstarg=`echo "$firstarg" | sed s/o//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-	case "$firstarg" in
-	*h*)
-	    firstarg=`echo "$firstarg" | sed s/h//`
-	    tar "$firstarg" "$@" && exit 0
-	    ;;
-	esac
-    fi
-
-    echo 1>&2 "\
-WARNING: I can't seem to be able to run \`tar' with the given arguments.
-         You may want to install GNU tar or Free paxutils, or check the
-         command line arguments."
-    exit 1
-    ;;
-
-  *)
-    echo 1>&2 "\
-WARNING: \`$1' is needed, and you do not seem to have it handy on your
-         system.  You might have modified some files without having the
-         proper tools for further handling them.  Check the \`README' file,
-         it often tells you about the needed prerequirements for installing
-         this package.  You may also peek at any GNU archive site, in case
-         some other package would contain this missing \`$1' program."
-    exit 1
-    ;;
-esac
-
-exit 0

mkinstalldirs

@@ -1,111 +0,0 @@
-#! /bin/sh
-# mkinstalldirs --- make directory hierarchy
-# Author: Noah Friedman <friedman@prep.ai.mit.edu>
-# Created: 1993-05-16
-# Public domain
-
-errstatus=0
-dirmode=""
-
-usage="\
-Usage: mkinstalldirs [-h] [--help] [-m mode] dir ..."
-
-# process command line arguments
-while test $# -gt 0 ; do
-  case $1 in
-    -h | --help | --h*)         # -h for help
-      echo "$usage" 1>&2
-      exit 0
-      ;;
-    -m)                         # -m PERM arg
-      shift
-      test $# -eq 0 && { echo "$usage" 1>&2; exit 1; }
-      dirmode=$1
-      shift
-      ;;
-    --)                         # stop option processing
-      shift
-      break
-      ;;
-    -*)                         # unknown option
-      echo "$usage" 1>&2
-      exit 1
-      ;;
-    *)                          # first non-opt arg
-      break
-      ;;
-  esac
-done
-
-for file
-do
-  if test -d "$file"; then
-    shift
-  else
-    break
-  fi
-done
-
-case $# in
-  0) exit 0 ;;
-esac
-
-case $dirmode in
-  '')
-    if mkdir -p -- . 2>/dev/null; then
-      echo "mkdir -p -- $*"
-      exec mkdir -p -- "$@"
-    fi
-    ;;
-  *)
-    if mkdir -m "$dirmode" -p -- . 2>/dev/null; then
-      echo "mkdir -m $dirmode -p -- $*"
-      exec mkdir -m "$dirmode" -p -- "$@"
-    fi
-    ;;
-esac
-
-for file
-do
-  set fnord `echo ":$file" | sed -ne 's/^:\//#/;s/^://;s/\// /g;s/^#/\//;p'`
-  shift
-
-  pathcomp=
-  for d
-  do
-    pathcomp="$pathcomp$d"
-    case $pathcomp in
-      -*) pathcomp=./$pathcomp ;;
-    esac
-
-    if test ! -d "$pathcomp"; then
-      echo "mkdir $pathcomp"
-
-      mkdir "$pathcomp" || lasterr=$?
-
-      if test ! -d "$pathcomp"; then
-  	errstatus=$lasterr
-      else
-  	if test ! -z "$dirmode"; then
-	  echo "chmod $dirmode $pathcomp"
-    	  lasterr=""
-  	  chmod "$dirmode" "$pathcomp" || lasterr=$?
-
-  	  if test ! -z "$lasterr"; then
-  	    errstatus=$lasterr
-  	  fi
-  	fi
-      fi
-    fi
-
-    pathcomp="$pathcomp/"
-  done
-done
-
-exit $errstatus
-
-# Local Variables:
-# mode: shell-script
-# sh-indentation: 2
-# End:
-# mkinstalldirs ends here

src/Makefile.am

@@ -1,29 +0,0 @@
-# Makefile.am for prt-get by Johannes Winkelmann
-
-install-exec-local: install-binPROGRAMS
-	(cd $(DESTDIR)$(bindir); ln -sf prt-get prt-cache)
-
-bin_PROGRAMS=prt-get
-
-prt_get_SOURCES= argparser.cpp argparser.h\
-                 depresolver.cpp depresolver.h \
-                 installtransaction.cpp installtransaction.h \
-                 main.cpp \
-                 package.cpp package.h \
-                 pkgdb.cpp pkgdb.h \
-                 prtget.cpp prtget.h \
-                 repository.cpp repository.h \
-                 stringhelper.cpp stringhelper.h \
-                 process.cpp process.h \
-                 configuration.cpp configuration.h \
-                 signaldispatcher.cpp signaldispatcher.h \
-                 lockfile.cpp lockfile.h \
-                 file.cpp file.h \
-                 locker.cpp locker.h \
-		 versioncomparator.cpp versioncomparator.h \
-		 datafileparser.cpp datafileparser.h \
-		 pg_regex.cpp pg_regex.h
-
-
-AM_CPPFLAGS = -DSYSCONFDIR=\"$(sysconfdir)\" \
-	      -DLOCALSTATEDIR=\"$(localstatedir)\"

src/Makefile.in

@@ -1,552 +0,0 @@
-# Makefile.in generated by automake 1.12.2 from Makefile.am.
-# @configure_input@
-
-# Copyright (C) 1994-2012 Free Software Foundation, Inc.
-
-# This Makefile.in is free software; the Free Software Foundation
-# gives unlimited permission to copy and/or distribute it,
-# with or without modifications, as long as this notice is preserved.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
-# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
-# PARTICULAR PURPOSE.
-
-@SET_MAKE@
-
-# Makefile.am for prt-get by Johannes Winkelmann
-
-VPATH = @srcdir@
-am__make_dryrun = \
-  { \
-    am__dry=no; \
-    case $$MAKEFLAGS in \
-      *\\[\ \	]*) \
-        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
-          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
-      *) \
-        for am__flg in $$MAKEFLAGS; do \
-          case $$am__flg in \
-            *=*|--*) ;; \
-            *n*) am__dry=yes; break;; \
-          esac; \
-        done;; \
-    esac; \
-    test $$am__dry = yes; \
-  }
-pkgdatadir = $(datadir)/@PACKAGE@
-pkgincludedir = $(includedir)/@PACKAGE@
-pkglibdir = $(libdir)/@PACKAGE@
-pkglibexecdir = $(libexecdir)/@PACKAGE@
-am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
-install_sh_DATA = $(install_sh) -c -m 644
-install_sh_PROGRAM = $(install_sh) -c
-install_sh_SCRIPT = $(install_sh) -c
-INSTALL_HEADER = $(INSTALL_DATA)
-transform = $(program_transform_name)
-NORMAL_INSTALL = :
-PRE_INSTALL = :
-POST_INSTALL = :
-NORMAL_UNINSTALL = :
-PRE_UNINSTALL = :
-POST_UNINSTALL = :
-bin_PROGRAMS = prt-get$(EXEEXT)
-subdir = src
-DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
-	$(top_srcdir)/depcomp $(top_srcdir)/mkinstalldirs
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-am__aclocal_m4_deps = $(top_srcdir)/configure.in
-am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
-	$(ACLOCAL_M4)
-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
-CONFIG_HEADER = $(top_builddir)/config.h
-CONFIG_CLEAN_FILES =
-CONFIG_CLEAN_VPATH_FILES =
-am__installdirs = "$(DESTDIR)$(bindir)"
-PROGRAMS = $(bin_PROGRAMS)
-am_prt_get_OBJECTS = argparser.$(OBJEXT) depresolver.$(OBJEXT) \
-	installtransaction.$(OBJEXT) main.$(OBJEXT) package.$(OBJEXT) \
-	pkgdb.$(OBJEXT) prtget.$(OBJEXT) repository.$(OBJEXT) \
-	stringhelper.$(OBJEXT) process.$(OBJEXT) \
-	configuration.$(OBJEXT) signaldispatcher.$(OBJEXT) \
-	lockfile.$(OBJEXT) file.$(OBJEXT) locker.$(OBJEXT) \
-	versioncomparator.$(OBJEXT) datafileparser.$(OBJEXT) \
-	pg_regex.$(OBJEXT)
-prt_get_OBJECTS = $(am_prt_get_OBJECTS)
-prt_get_LDADD = $(LDADD)
-DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
-depcomp = $(SHELL) $(top_srcdir)/depcomp
-am__depfiles_maybe = depfiles
-am__mv = mv -f
-CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
-	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
-CXXLD = $(CXX)
-CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
-	-o $@
-COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
-	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
-CCLD = $(CC)
-LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
-SOURCES = $(prt_get_SOURCES)
-DIST_SOURCES = $(prt_get_SOURCES)
-am__can_run_installinfo = \
-  case $$AM_UPDATE_INFO_DIR in \
-    n|no|NO) false;; \
-    *) (install-info --version) >/dev/null 2>&1;; \
-  esac
-ETAGS = etags
-CTAGS = ctags
-DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
-ACLOCAL = @ACLOCAL@
-AMTAR = @AMTAR@
-AUTOCONF = @AUTOCONF@
-AUTOHEADER = @AUTOHEADER@
-AUTOMAKE = @AUTOMAKE@
-AWK = @AWK@
-CC = @CC@
-CCDEPMODE = @CCDEPMODE@
-CFLAGS = @CFLAGS@
-CPP = @CPP@
-CPPFLAGS = @CPPFLAGS@
-CXX = @CXX@
-CXXDEPMODE = @CXXDEPMODE@
-CXXFLAGS = @CXXFLAGS@
-CYGPATH_W = @CYGPATH_W@
-DEFS = @DEFS@
-DEPDIR = @DEPDIR@
-ECHO_C = @ECHO_C@
-ECHO_N = @ECHO_N@
-ECHO_T = @ECHO_T@
-EGREP = @EGREP@
-EXEEXT = @EXEEXT@
-GREP = @GREP@
-INSTALL = @INSTALL@
-INSTALL_DATA = @INSTALL_DATA@
-INSTALL_PROGRAM = @INSTALL_PROGRAM@
-INSTALL_SCRIPT = @INSTALL_SCRIPT@
-INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
-LDFLAGS = @LDFLAGS@
-LIBOBJS = @LIBOBJS@
-LIBS = @LIBS@
-LTLIBOBJS = @LTLIBOBJS@
-MAKEINFO = @MAKEINFO@
-MKDIR_P = @MKDIR_P@
-OBJEXT = @OBJEXT@
-PACKAGE = @PACKAGE@
-PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
-PACKAGE_NAME = @PACKAGE_NAME@
-PACKAGE_STRING = @PACKAGE_STRING@
-PACKAGE_TARNAME = @PACKAGE_TARNAME@
-PACKAGE_URL = @PACKAGE_URL@
-PACKAGE_VERSION = @PACKAGE_VERSION@
-PATH_SEPARATOR = @PATH_SEPARATOR@
-SET_MAKE = @SET_MAKE@
-SHELL = @SHELL@
-STRIP = @STRIP@
-VERSION = @VERSION@
-abs_builddir = @abs_builddir@
-abs_srcdir = @abs_srcdir@
-abs_top_builddir = @abs_top_builddir@
-abs_top_srcdir = @abs_top_srcdir@
-ac_ct_CC = @ac_ct_CC@
-ac_ct_CXX = @ac_ct_CXX@
-am__include = @am__include@
-am__leading_dot = @am__leading_dot@
-am__quote = @am__quote@
-am__tar = @am__tar@
-am__untar = @am__untar@
-bindir = @bindir@
-build_alias = @build_alias@
-builddir = @builddir@
-datadir = @datadir@
-datarootdir = @datarootdir@
-docdir = @docdir@
-dvidir = @dvidir@
-exec_prefix = @exec_prefix@
-host_alias = @host_alias@
-htmldir = @htmldir@
-includedir = @includedir@
-infodir = @infodir@
-install_sh = @install_sh@
-libdir = @libdir@
-libexecdir = @libexecdir@
-localedir = @localedir@
-localstatedir = @localstatedir@
-mandir = @mandir@
-mkdir_p = @mkdir_p@
-oldincludedir = @oldincludedir@
-pdfdir = @pdfdir@
-prefix = @prefix@
-program_transform_name = @program_transform_name@
-psdir = @psdir@
-sbindir = @sbindir@
-sharedstatedir = @sharedstatedir@
-srcdir = @srcdir@
-sysconfdir = @sysconfdir@
-target_alias = @target_alias@
-top_build_prefix = @top_build_prefix@
-top_builddir = @top_builddir@
-top_srcdir = @top_srcdir@
-prt_get_SOURCES = argparser.cpp argparser.h\
-                 depresolver.cpp depresolver.h \
-                 installtransaction.cpp installtransaction.h \
-                 main.cpp \
-                 package.cpp package.h \
-                 pkgdb.cpp pkgdb.h \
-                 prtget.cpp prtget.h \
-                 repository.cpp repository.h \
-                 stringhelper.cpp stringhelper.h \
-                 process.cpp process.h \
-                 configuration.cpp configuration.h \
-                 signaldispatcher.cpp signaldispatcher.h \
-                 lockfile.cpp lockfile.h \
-                 file.cpp file.h \
-                 locker.cpp locker.h \
-		 versioncomparator.cpp versioncomparator.h \
-		 datafileparser.cpp datafileparser.h \
-		 pg_regex.cpp pg_regex.h
-
-AM_CPPFLAGS = -DSYSCONFDIR=\"$(sysconfdir)\" \
-	      -DLOCALSTATEDIR=\"$(localstatedir)\"
-
-all: all-am
-
-.SUFFIXES:
-.SUFFIXES: .cpp .o .obj
-$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
-	@for dep in $?; do \
-	  case '$(am__configure_deps)' in \
-	    *$$dep*) \
-	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
-	        && { if test -f $@; then exit 0; else break; fi; }; \
-	      exit 1;; \
-	  esac; \
-	done; \
-	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
-	$(am__cd) $(top_srcdir) && \
-	  $(AUTOMAKE) --gnu src/Makefile
-.PRECIOUS: Makefile
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	@case '$?' in \
-	  *config.status*) \
-	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
-	  *) \
-	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
-	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
-	esac;
-
-$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-
-$(top_srcdir)/configure:  $(am__configure_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
-	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
-$(am__aclocal_m4_deps):
-install-binPROGRAMS: $(bin_PROGRAMS)
-	@$(NORMAL_INSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	if test -n "$$list"; then \
-	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
-	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
-	fi; \
-	for p in $$list; do echo "$$p $$p"; done | \
-	sed 's/$(EXEEXT)$$//' | \
-	while read p p1; do if test -f $$p; \
-	  then echo "$$p"; echo "$$p"; else :; fi; \
-	done | \
-	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
-	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
-	sed 'N;N;N;s,\n, ,g' | \
-	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
-	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
-	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
-	    else { print "f", $$3 "/" $$4, $$1; } } \
-	  END { for (d in files) print "f", d, files[d] }' | \
-	while read type dir files; do \
-	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
-	    test -z "$$files" || { \
-	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
-	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
-	    } \
-	; done
-
-uninstall-binPROGRAMS:
-	@$(NORMAL_UNINSTALL)
-	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
-	files=`for p in $$list; do echo "$$p"; done | \
-	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
-	      -e 's/$$/$(EXEEXT)/' `; \
-	test -n "$$list" || exit 0; \
-	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
-	cd "$(DESTDIR)$(bindir)" && rm -f $$files
-
-clean-binPROGRAMS:
-	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
-prt-get$(EXEEXT): $(prt_get_OBJECTS) $(prt_get_DEPENDENCIES) $(EXTRA_prt_get_DEPENDENCIES) 
-	@rm -f prt-get$(EXEEXT)
-	$(CXXLINK) $(prt_get_OBJECTS) $(prt_get_LDADD) $(LIBS)
-
-mostlyclean-compile:
-	-rm -f *.$(OBJEXT)
-
-distclean-compile:
-	-rm -f *.tab.c
-
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/argparser.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/configuration.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/datafileparser.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/depresolver.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/installtransaction.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/locker.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lockfile.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/package.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pg_regex.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkgdb.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/process.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prtget.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/repository.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/signaldispatcher.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stringhelper.Po@am__quote@
-@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/versioncomparator.Po@am__quote@
-
-.cpp.o:
-@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
-@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
-
-.cpp.obj:
-@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
-@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
-@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
-@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
-
-ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
-	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	mkid -fID $$unique
-tags: TAGS
-
-TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	set x; \
-	here=`pwd`; \
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	shift; \
-	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
-	  test -n "$$unique" || unique=$$empty_fix; \
-	  if test $$# -gt 0; then \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      "$$@" $$unique; \
-	  else \
-	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
-	      $$unique; \
-	  fi; \
-	fi
-ctags: CTAGS
-CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
-		$(TAGS_FILES) $(LISP)
-	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
-	unique=`for i in $$list; do \
-	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
-	  done | \
-	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
-	      END { if (nonempty) { for (i in files) print i; }; }'`; \
-	test -z "$(CTAGS_ARGS)$$unique" \
-	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
-	     $$unique
-
-GTAGS:
-	here=`$(am__cd) $(top_builddir) && pwd` \
-	  && $(am__cd) $(top_srcdir) \
-	  && gtags -i $(GTAGS_ARGS) "$$here"
-
-cscopelist:  $(HEADERS) $(SOURCES) $(LISP)
-	list='$(SOURCES) $(HEADERS) $(LISP)'; \
-	case "$(srcdir)" in \
-	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
-	  *) sdir=$(subdir)/$(srcdir) ;; \
-	esac; \
-	for i in $$list; do \
-	  if test -f "$$i"; then \
-	    echo "$(subdir)/$$i"; \
-	  else \
-	    echo "$$sdir/$$i"; \
-	  fi; \
-	done >> $(top_builddir)/cscope.files
-
-distclean-tags:
-	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
-
-distdir: $(DISTFILES)
-	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
-	list='$(DISTFILES)'; \
-	  dist_files=`for file in $$list; do echo $$file; done | \
-	  sed -e "s|^$$srcdirstrip/||;t" \
-	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
-	case $$dist_files in \
-	  */*) $(MKDIR_P) `echo "$$dist_files" | \
-			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
-			   sort -u` ;; \
-	esac; \
-	for file in $$dist_files; do \
-	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
-	  if test -d $$d/$$file; then \
-	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
-	    if test -d "$(distdir)/$$file"; then \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
-	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
-	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
-	    fi; \
-	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
-	  else \
-	    test -f "$(distdir)/$$file" \
-	    || cp -p $$d/$$file "$(distdir)/$$file" \
-	    || exit 1; \
-	  fi; \
-	done
-check-am: all-am
-check: check-am
-all-am: Makefile $(PROGRAMS)
-installdirs:
-	for dir in "$(DESTDIR)$(bindir)"; do \
-	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
-	done
-install: install-am
-install-exec: install-exec-am
-install-data: install-data-am
-uninstall: uninstall-am
-
-install-am: all-am
-	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
-
-installcheck: installcheck-am
-install-strip:
-	if test -z '$(STRIP)'; then \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	      install; \
-	else \
-	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
-	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
-	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
-	fi
-mostlyclean-generic:
-
-clean-generic:
-
-distclean-generic:
-	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
-	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
-
-maintainer-clean-generic:
-	@echo "This command is intended for maintainers to use"
-	@echo "it deletes files that may require special tools to rebuild."
-clean: clean-am
-
-clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
-
-distclean: distclean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-distclean-am: clean-am distclean-compile distclean-generic \
-	distclean-tags
-
-dvi: dvi-am
-
-dvi-am:
-
-html: html-am
-
-html-am:
-
-info: info-am
-
-info-am:
-
-install-data-am:
-
-install-dvi: install-dvi-am
-
-install-dvi-am:
-
-install-exec-am: install-binPROGRAMS install-exec-local
-
-install-html: install-html-am
-
-install-html-am:
-
-install-info: install-info-am
-
-install-info-am:
-
-install-man:
-
-install-pdf: install-pdf-am
-
-install-pdf-am:
-
-install-ps: install-ps-am
-
-install-ps-am:
-
-installcheck-am:
-
-maintainer-clean: maintainer-clean-am
-	-rm -rf ./$(DEPDIR)
-	-rm -f Makefile
-maintainer-clean-am: distclean-am maintainer-clean-generic
-
-mostlyclean: mostlyclean-am
-
-mostlyclean-am: mostlyclean-compile mostlyclean-generic
-
-pdf: pdf-am
-
-pdf-am:
-
-ps: ps-am
-
-ps-am:
-
-uninstall-am: uninstall-binPROGRAMS
-
-.MAKE: install-am install-strip
-
-.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
-	clean-generic cscopelist ctags distclean distclean-compile \
-	distclean-generic distclean-tags distdir dvi dvi-am html \
-	html-am info info-am install install-am install-binPROGRAMS \
-	install-data install-data-am install-dvi install-dvi-am \
-	install-exec install-exec-am install-exec-local install-html \
-	install-html-am install-info install-info-am install-man \
-	install-pdf install-pdf-am install-ps install-ps-am \
-	install-strip installcheck installcheck-am installdirs \
-	maintainer-clean maintainer-clean-generic mostlyclean \
-	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
-	tags uninstall uninstall-am uninstall-binPROGRAMS
-
-
-install-exec-local: install-binPROGRAMS
-	(cd $(DESTDIR)$(bindir); ln -sf prt-get prt-cache)
-
-# Tell versions [3.59,3.63) of GNU make to not export all variables.
-# Otherwise a system limit (for SysV at least) may be exceeded.
-.NOEXPORT:

src/configuration.cpp

@@ -30,13 +30,15 @@ Configuration::Configuration( const std::string& configFile,
       m_writeLog( false ),
       m_appendLog( false ),
       m_removeLogOnSuccess( false ),
+      m_removeLogOnUninst( false ),
       m_readmeMode( VERBOSE_README ),
       m_runScripts( false ),
       m_preferHigher( false ),
       m_useRegex( false ),
       m_followSoftdeps( false ),
       m_makeCommand( "" ), m_addCommand( "" ),
-      m_removeCommand( "" ), m_runscriptCommand( "" )
+      m_removeCommand( "" ), m_runscriptCommand( "" ),
+      m_packageDir( "" ), m_compressionMode( "" )
 {
 
 }
@@ -84,11 +86,35 @@ bool Configuration::removeLogOnSuccess() const
     return m_removeLogOnSuccess;
 }
 
+bool Configuration::removeLogOnUninst() const
+{
+    return m_removeLogOnUninst;
+}
+
 string Configuration::logFilePattern() const
 {
     return m_logFilePattern;
 }
 
+string Configuration::packageDir() const
+{
+    string value = "";
+    char line[256];
+    string cmd = "eval " + m_packageDir + " && echo \"$PKGMK_PACKAGE_DIR\"";
+    FILE* p = popen(cmd.c_str(), "r");
+    if (p) {
+        fgets(line, 256, p);
+        value = StringHelper::stripWhiteSpace(line);
+        pclose(p);
+    }
+
+    return value;
+}
+
+string Configuration::compressionMode() const
+{
+    return ( m_compressionMode == "" ) ? "gz" : m_compressionMode;
+}
 
 const list< pair<string, string> >& Configuration::rootList() const
 {
@@ -153,7 +179,9 @@ void Configuration::parseLine(const string& line, bool prepend)
             // it's already set to false, so we can just enable it.
             // like this, the command line switch works as well
             m_writeLog = true;
-        }
+        } else if ( s == "disabled" ) {
+	    m_writeLog = false;
+	}
     } else if ( startsWithNoCase( s, "logfile" ) ) {
         s = stripWhiteSpace( s.replace( 0, 7, "" ) );
         m_logFilePattern = s;
@@ -166,7 +194,16 @@ void Configuration::parseLine(const string& line, bool prepend)
         s = stripWhiteSpace( s.replace( 0, 16, "" ) );
         if ( s == "yes" ) {
             m_removeLogOnSuccess = true;
-        }
+        } else if ( s == "no" ) {
+	    m_removeLogOnSuccess = false;
+	}
+    } else if ( startsWithNoCase( s, "rmlog_on_uninst" ) ) {
+        s = stripWhiteSpace( s.replace( 0, 15, "" ) );
+        if ( s == "yes" ) {
+            m_removeLogOnUninst = true;
+        } else if ( s == "no" ) {
+	    m_removeLogOnUninst = false;
+	}
     } else if ( startsWithNoCase( s, "readme" ) ) {
         s = stripWhiteSpace( s.replace( 0, 6, "" ) );
         if ( s == "compact" ) {
@@ -178,12 +215,16 @@ void Configuration::parseLine(const string& line, bool prepend)
         s = stripWhiteSpace( s.replace( 0, 10, "" ) );
         if ( s == "yes" ) {
             m_runScripts = true;
-        }
+        } else if ( s == "no" ) {
+	    m_runScripts = false;
+	}
     } else if ( startsWithNoCase( s, "preferhigher" ) ) {
         s = stripWhiteSpace( s.replace( 0, 12, "" ) );
         if ( s == "yes" ) {
             m_preferHigher = true;
-        }
+        } else if ( s == "no" ) {
+	    m_preferHigher = false;
+	}
     } else if ( startsWithNoCase( s, "useregex" ) ) {
         s = stripWhiteSpace( s.replace( 0, 8, "" ) );
         if ( s == "yes" ) {
@@ -193,8 +234,7 @@ void Configuration::parseLine(const string& line, bool prepend)
         s = stripWhiteSpace( s.replace( 0, 8, "" ) );
 	if ( s == "yes" ) {
             m_followSoftdeps = true;
-	}
-	if ( s == "no" ) {
+	} else if ( s == "no" ) {
 	    m_followSoftdeps = false;
 	}
     } else if ( startsWithNoCase( s, "makecommand" ) ) {
@@ -208,6 +248,32 @@ void Configuration::parseLine(const string& line, bool prepend)
     }
 }
 
+bool Configuration::parsePkgmkConf(int readOrder)
+{
+    string fileName = (readOrder == 1) ? "/etc/pkgmk.conf" : "/usr/bin/pkgmk";
+    FILE* fp = fopen(fileName.c_str(), "r");
+    if (!fp)
+        return false;
+
+    string s;
+    char line[256];
+    while (fgets(line, 256, fp)) {
+        s = StringHelper::stripWhiteSpace(getValueBefore(line,'#'));
+        if ( StringHelper::startsWith(s, "PKGMK_COMPRESSION_MODE=") &&
+		(readOrder==1 || m_compressionMode == "") ) {
+                m_compressionMode = s.substr(23);
+		StringHelper::replaceAll(m_compressionMode,"\"","");
+		StringHelper::replaceAll(m_compressionMode,"'","");
+        } else if ( StringHelper::startsWith(s, "PKGMK_PACKAGE_DIR=") &&
+		(readOrder==1 || m_packageDir == "" ) ) {
+		m_packageDir = s;
+	}
+    }
+    fclose(fp);
+
+    return ( m_compressionMode != "" && m_packageDir != "" );
+}
+
 bool Configuration::runScripts() const
 {
     return m_runScripts;
@@ -245,6 +311,6 @@ bool Configuration::useRegex() const
 
 bool Configuration::followSoftdeps() const
 {
-    return m_followSoftdeps;
+    return ( m_followSoftdeps || m_parser->followSoftdeps() );
 }
 

src/configuration.h

@@ -30,6 +30,7 @@ public:
     bool writeLog() const;
     bool appendLog() const;
     bool removeLogOnSuccess() const;
+    bool removeLogOnUninst() const;
     std::string logFilePattern() const;
 
     const std::list< std::pair<std::string, std::string> >& rootList() const;
@@ -45,6 +46,8 @@ public:
     bool useRegex() const;
     bool followSoftdeps() const;
 
+    bool parsePkgmkConf(int readOrder);
+
     void addConfig(const std::string& line,
                    bool configSet,
                    bool configPrepend);
@@ -53,6 +56,8 @@ public:
     std::string addCommand() const;
     std::string removeCommand() const;
     std::string runscriptCommand() const;
+    std::string packageDir() const;
+    std::string compressionMode() const;
 
 private:
     std::string m_configFile;
@@ -67,6 +72,7 @@ private:
     bool m_writeLog;
     bool m_appendLog;
     bool m_removeLogOnSuccess;
+    bool m_removeLogOnUninst;
 
     ReadmeMode m_readmeMode;
 
@@ -80,6 +86,8 @@ private:
     std::string m_removeCommand;
     std::string m_runscriptCommand;
 
+    std::string m_packageDir;
+    std::string m_compressionMode;
 
     void parseLine(const std::string& line, bool prepend=false);
 };

src/installtransaction.cpp

@@ -143,7 +143,6 @@ InstallTransaction::installError() const
   install (commit) a transaction
   \param parser the argument parser
   \param update whether this is an update operation
-  \param group whether this is a group transaction (stops transaction on error)
   \return returns an InstallResult telling whether installation worked
 */
 InstallTransaction::InstallResult
@@ -185,10 +184,22 @@ InstallTransaction::install( const ArgParser* parser,
 
         InstallTransaction::InstallResult result;
         InstallInfo info( package->hasReadme() );
-        if ( parser->isTest() ||
-             (result = installPackage( package, parser, update, info )) == SUCCESS) {
+        if ( parser->isTest() ) {
+            info.preState = ( package->hasPreInstall() && 
+                (parser->execPreInstall() || m_config->runScripts())
+		          ) ? DEFERRED : NONEXISTENT;
+	    info.postState = ( package->hasPostInstall() &&
+                (parser->execPostInstall() || m_config->runScripts())
+		          ) ? DEFERRED : NONEXISTENT;
+            m_installedPackages.push_back( make_pair(package->path() 
+				    + "/" + package->name(), info) );
+	    continue;
+	}
+		
+        if ((result = installPackage( package, parser, update, info )) == SUCCESS) {
 
-            m_installedPackages.push_back( make_pair( package->name(), info));
+            m_installedPackages.push_back( make_pair( package->path() 
+				    + "/" + package->name(), info));
         } else {
 
             // log failures are critical
@@ -241,7 +252,7 @@ InstallTransaction::installPackage( const Package* package,
         commandName = "prt-cache";
     }
 
-    // - initial information about the package to be build
+    // - initial information about the package to be built
     string message;
     message = commandName + ": ";
     if (update) {
@@ -306,14 +317,16 @@ InstallTransaction::installPackage( const Package* package,
     if (m_config->runscriptCommand() != "") {
         runscriptCommand = m_config->runscriptCommand();
     }
+    if (parser->installRoot() != "") {
+	runscriptCommand = "chroot " + parser->installRoot() + runscriptCommand;
+    }
 
     // -- pre-install
     struct stat statData;
     if ((parser->execPreInstall() || m_config->runScripts()) &&
-        stat((pkgdir + "/" + "pre-install").c_str(), &statData) == 0) {
-        Process preProc( runscriptCommand,
-                         pkgdir + "/" + "pre-install",
-                         fdlog );
+        stat((parser->installRoot() + pkgdir + "/" + "pre-install").c_str(),
+		&statData) == 0) {
+        Process preProc( runscriptCommand, pkgdir + "/" + "pre-install", fdlog );
         if (preProc.executeShell()) {
             info.preState = FAILED;
         } else {
@@ -328,12 +341,18 @@ InstallTransaction::installPackage( const Package* package,
     }
 
     string args = "-d " + parser->pkgmkArgs();
+    // do not force a rebuild unless the port was given on the command line
+    if ( parser->pkgmkArgs().find(" -f")!=string::npos &&
+         find(parser->otherArgs().begin(), parser->otherArgs().end(),
+		 package->name()) == parser->otherArgs().end() ) {
+	    StringHelper::replaceAll(args," -f", "");
+    }
     Process makeProc( cmd, args, fdlog );
     if ( makeProc.executeShell() ) {
         result = PKGMK_FAILURE;
     } else {
         // -- update
-        string pkgdest = getPkgmkPackageDir();
+        string pkgdest = m_config->packageDir();
         if ( pkgdest != "" ) {
             // TODO: don't manipulate pkgdir
             pkgdir = pkgdest;
@@ -371,7 +390,7 @@ InstallTransaction::installPackage( const Package* package,
             args +=
                 package->name()    + "#" +
                 package->version() + "-" +
-                package->release() + ".pkg.tar." + getPkgmkCompressionMode();
+                package->release() + ".pkg.tar." + m_config->compressionMode();
 
 
             // - inform the user about what's happening
@@ -418,14 +437,12 @@ InstallTransaction::installPackage( const Package* package,
             } else {
                 // exec post install
                 if ((parser->execPostInstall()  || m_config->runScripts() ) &&
-                    stat((package->path() + "/" + package->name() +
-                          "/" + "post-install").c_str(), &statData)
-                    == 0) {
+                    stat((parser->installRoot() + "/" + package->path() + "/"
+			  + package->name() + "/" + "post-install").c_str(), 
+			    &statData) == 0) {
                     // Work around the pkgdir variable change
-                    Process postProc( runscriptCommand,
-                                      package->path() + "/" + package->name()+
-                                      "/" + "post-install",
-				      fdlog );
+                    Process postProc( runscriptCommand, package->path() + "/"
+			   + package->name() + "/post-install", fdlog );
                     if (postProc.executeShell()) {
                         info.postState = FAILED;
                     } else {
@@ -467,7 +484,6 @@ bool InstallTransaction::calculateDependencies()
         return false;
     }
 
-    vector<string> treeWalk;
     list< pair<string, const Package*> >::const_iterator it =
         m_packages.begin();
     for ( ; it != m_packages.end(); ++it ) {
@@ -513,8 +529,8 @@ void InstallTransaction::checkDependencies( bool greedy,
 
     if ( index == -1 ) {
         index = m_depList.size();
-	if (( not greedy ) or ( m_pkgDB->isInstalled(package->name(),false) )) {
-        m_depList.push_back( package->name() );
+	if ( (!greedy) or isRequired( package->name() ) ) {
+            m_depList.push_back( package->name() );
 	}
     }
 
@@ -542,41 +558,31 @@ void InstallTransaction::checkDependencies( bool greedy,
             list<string>::iterator it = deps.begin();
             for ( ; it != deps.end(); ++it ) {
                 string dep = *it;
-                if ( !dep.empty() ) {
-                    string::size_type pos = dep.find_last_of( '/' );
-                    if ( pos != string::npos && (pos+1) < dep.length() ) {
-                        dep = dep.substr( pos + 1 );
-                    }
-                    const Package* p = m_repo->getPackage( dep );
-                    if ( p ) {
-                        checkDependencies( greedy, p, index );
-                    } else {
-                        m_missingPackages.
-                            push_back( make_pair( dep, package->name() ) );
-                    }
+                if ( dep.empty() ) { continue; }
+                const Package* p = m_repo->getPackage( dep );
+                if ( p ) {
+                    checkDependencies( greedy, p, index );
+                } else {
+                    m_missingPackages.
+                        push_back( make_pair( dep, package->name() ) );
                 }
             }
 	}
         if ( (m_config->followSoftdeps()) and (!package->optionals().empty()) ) {
-	    list<string> softDeps;
-	    split( package->optionals(), ',', softDeps );
-            list<string>::iterator it = softDeps.begin();
-	    for ( ; it != softDeps.end(); ++it ) {
+	    list<string> optionals;
+	    split( package->optionals(), ',', optionals );
+            list<string>::iterator it = optionals.begin();
+	    for ( ; it != optionals.end(); ++it ) {
                 string softdep = *it;
-                if ( !softdep.empty() ) {
-                    string::size_type pos = softdep.find_last_of( '/' );
-                    if ( pos != string::npos && (pos+1) < softdep.length() ) {
-                        softdep = softdep.substr( pos + 1 );
+                if ( softdep.empty() ) { continue; }
+	        if ( isRequired(softdep) ) {
+                    const Package* p = m_repo->getPackage( softdep );
+                    if ( p ) {
+                        checkDependencies( true, p, index );
+                    } else {
+                        m_missingPackages.
+                        push_back( make_pair( softdep, package->name() ) );
                     }
-		    if ( m_pkgDB->isInstalled(softdep, true) ) {
-                        const Package* p = m_repo->getPackage( softdep );
-                        if ( p ) {
-                            checkDependencies( true, p, index );
-                        } else {
-                            m_missingPackages.
-                            push_back( make_pair( softdep, package->name() ) );
-                        }
-		    }
                 }
             }
         }
@@ -586,6 +592,17 @@ void InstallTransaction::checkDependencies( bool greedy,
     treeWalk.pop_back();
 }
 
+/*!
+  Method to determine whether a soft dependency should be part of the transaction
+*/
+bool InstallTransaction::isRequired(const string &pname) {
+    if ( m_pkgDB->isInstalled(pname,false) ) { return true; }
+    list< pair<string, const Package*> >::iterator it = m_packages.begin();
+    for ( ; it != m_packages.end(); ++it ) {
+	    if ( pname == it->first ) { return true; }
+    }
+    return false;
+}
 
 /*!
   This method returns a list of packages which should be installed to
@@ -656,7 +673,7 @@ InstallTransaction::calcDependencies( )
         }
     }
     if ( !validPackages ) {
-        return PACKAGE_NOT_FOUND;
+        return NO_PACKAGE_GIVEN;
     }
 
     if ( !calculateDependencies() ) {
@@ -666,64 +683,7 @@ InstallTransaction::calcDependencies( )
 }
 
 
-/*
- * getPkgDest assumes that you're in the build directory already
- */
-string InstallTransaction::getPkgmkSetting(const string& setting)
-{
-    string value = "";
-    value = getPkgmkSettingFromFile(setting, "/etc/pkgmk.conf");
-    if (value.size() == 0) {
-        value = getPkgmkSettingFromFile(setting, "/usr/bin/pkgmk");
-    }
-
-    return value;
-}
-
-string InstallTransaction::getPkgmkSettingFromFile(const string& setting, const string& fileName)
-{
-    FILE* fp = fopen(fileName.c_str(), "r");
-    if (!fp)
-        return "";
-
-    string candidate;
-    string s;
-    char line[256];
-    while (fgets(line, 256, fp)) {
-        s = StringHelper::stripWhiteSpace(line);
-        if (StringHelper::startsWith(s, setting + "=")) {
-            candidate = s;
-        }
-    }
-    fclose(fp);
-
-    string value = "";
-    if (candidate.length() > 0) {
-        string cmd = "eval " + candidate + " && echo $" + setting;
-        FILE* p = popen(cmd.c_str(), "r");
-        if (p) {
-            fgets(line, 256, p);
-            value = StringHelper::stripWhiteSpace(line);
-            fclose(p);
-        }
-    }
-
-    return value;
-}
-
 const list<string>& InstallTransaction::ignoredPackages() const
 {
     return m_ignoredPackages;
 }
-
-string InstallTransaction::getPkgmkPackageDir()
-{
-    return getPkgmkSetting("PKGMK_PACKAGE_DIR");
-}
-
-string InstallTransaction::getPkgmkCompressionMode()
-{
-    string value = getPkgmkSetting("PKGMK_COMPRESSION_MODE");
-
-    return value.size() ? value : "gz";
-}

src/installtransaction.h

@@ -56,9 +56,7 @@ public:
         SUCCESS,             /*!< yeah, success */
         NO_PACKAGE_GIVEN,    /*!< no package give to install */
         PACKAGE_NOT_FOUND,   /*!< package not found */
-        PKGMK_EXEC_ERROR,    /*!< can't execute pkgmk */
         PKGMK_FAILURE,       /*!< error while pkgmk */
-        PKGADD_EXEC_ERROR,   /*!< can't execute pkgadd */
         PKGDEST_ERROR,             /*!< can't change to PKGDEST */
         PKGADD_FAILURE,      /*!< error while pkgadd */
         CYCLIC_DEPEND,       /*!< cyclic dependencies found */
@@ -69,6 +67,7 @@ public:
     };
 
     enum State {
+        DEFERRED,
         EXEC_SUCCESS,
         FAILED,
         NONEXISTENT
@@ -97,9 +96,6 @@ public:
     const list< pair<string,string> >& missing() const;
     const list< pair<string, InstallInfo> >& installError() const;
 
-    static string getPkgmkPackageDir();
-    static string getPkgmkCompressionMode();
-
 private:
     bool calculateDependencies();
     void checkDependencies( bool greedy, const Package* package, int depends=-1 );
@@ -108,10 +104,7 @@ private:
                                   const ArgParser* parser,
                                   bool update,
                                   InstallInfo& info ) const;
-
-    static string getPkgmkSetting(const string& setting);
-    static string getPkgmkSettingFromFile(const string& setting, 
-                                          const string& fileName);
+    bool isRequired(const string &pname);
 
     PkgDB* m_pkgDB;
     DepResolver m_resolver;

src/meson.build

@@ -0,0 +1,25 @@
+executable('prt-get',
+           'argparser.cpp',
+           'lockfile.cpp',
+           'process.cpp',
+           'pkgdb.cpp',
+           'installtransaction.cpp',
+           'package.cpp',
+           'versioncomparator.cpp',
+           'main.cpp',
+           'locker.cpp',
+           'repository.cpp',
+           'configuration.cpp',
+           'datafileparser.cpp',
+           'depresolver.cpp',
+           'pg_regex.cpp',
+           'stringhelper.cpp',
+           'prtget.cpp',
+           'file.cpp',
+           'signaldispatcher.cpp',
+           include_directories : myconf_dir,
+           install : true)
+
+install_symlink('prt-cache',
+  install_dir : get_option('prefix') / 'bin',
+  pointing_to : 'prt-get')

src/package.cpp

@@ -124,7 +124,7 @@ const string& Package::maintainer() const
 }
 
 /*! \return whether or not this package has a readme file */
-const bool Package::hasReadme() const
+bool Package::hasReadme() const
 {
     load();
     return m_data->hasReadme;
@@ -137,12 +137,12 @@ string Package::versionReleaseString() const
     return m_data->versionReleaseString;
 }
 
-const bool Package::hasPreInstall() const
+bool Package::hasPreInstall() const
 {
     return m_data->hasPreInstall;
 }
 
-const bool Package::hasPostInstall() const
+bool Package::hasPostInstall() const
 {
     return m_data->hasPostInstall;
 }
@@ -213,50 +213,17 @@ void Package::load() const
 
                     StringHelper::replaceAll( softdeps, " ", "," );
                     StringHelper::replaceAll( softdeps, ",,", "," );
+                    StringHelper::replaceAll( softdeps, "(", "" );
+                    StringHelper::replaceAll( softdeps, ")", "" );
 
-                    // TODO: decide which one to use
-#if 0
-                    // remove commented out packages
-                    list<string> softDepList = StringHelper::split( softdeps, ',' );
-                    list<string>::iterator it = deps.begin();
-                    for ( ; it != softDepList.end(); ++it ) {
-                        if ( (*it)[0] == '#' ) {
-                            cerr << "Commented dep: " << *it << endl;
-                        } else {
-                            if ( it != softDepsList.begin() ) {
-                                m_data->optionals += ",";
-                            }
-                            m_data->optionals += *it;
-                        }
-                    }
-#else
                     m_data->optionals = softdeps;
-#endif
                 } else if ( startsWithNoCase( line, "dep" ) ) {
                     string depends = stripWhiteSpace( getValue( line, ':' ) );
 
                     StringHelper::replaceAll( depends, " ", "," );
                     StringHelper::replaceAll( depends, ",,", "," );
 
-                    // TODO: decide which one to use
-#if 0
-                    // remove commented out packages
-                    list<string> deps = StringHelper::split( depends, ',' );
-                    list<string>::iterator it = deps.begin();
-                    for ( ; it != deps.end(); ++it ) {
-                        if ( (*it)[0] == '#' ) {
-                            cerr << "Commented dep: " << *it << endl;
-                        } else {
-                            if ( it != deps.begin() ) {
-                                m_data->depends += ",";
-                            }
-                            m_data->depends += *it;
-                        }
-                    }
-#else
                     m_data->depends = depends;
-#endif
-
                 }
             }
         }
@@ -345,11 +312,9 @@ void Package::expandShellCommands(std::string& input,
         pos = 0;
         while ((pos = input.find(startTag[i], pos)) != string::npos) {
             
-            if (unameBuf.release) {
-                input = replaceAll(input,
-                                   startTag[i] + "uname -r" + endTag[i],
-                                   unameBuf.release);
-            }
+            input = replaceAll(input,
+                               startTag[i] + "uname -r" + endTag[i],
+                               unameBuf.release);
 
             dpos = input.find(startTag[i] + "date");
             if (dpos != string::npos) {

src/package.h

@@ -52,9 +52,9 @@ public:
     const std::string& url() const;
     const std::string& optionals() const;
     const std::string& maintainer() const;
-    const bool hasReadme() const;
-    const bool hasPreInstall() const;
-    const bool hasPostInstall() const;
+    bool hasReadme() const;
+    bool hasPreInstall() const;
+    bool hasPostInstall() const;
     
     std::string versionReleaseString() const;
 

src/pkgdb.cpp

@@ -20,6 +20,7 @@ using namespace std;
 
 #include <fnmatch.h>
 
+#include "config.h"
 #include "pkgdb.h"
 #include "datafileparser.h"
 #include "stringhelper.h"

src/process.cpp

@@ -68,9 +68,9 @@ int Process::execute()
     int status = 0;
 
     if ( m_fdlog > 0 ) {
-        status = execLog(argc, argv);
+        status = execLog(argv);
     } else {
-        status = exec(argc, argv);
+        status = exec(argv);
     }
     delete [] argv;
 
@@ -78,7 +78,7 @@ int Process::execute()
 }
 
 
-int Process::execLog(const int argc, char** argv)
+int Process::execLog(char** argv)
 {
     int status = 0;
     int fdpipe[2];
@@ -123,7 +123,7 @@ int Process::execLog(const int argc, char** argv)
 }
 
 
-int Process::exec(const int argc, char** argv)
+int Process::exec(char** argv)
 {
     int status = 0;
     pid_t pid = fork();

src/process.h

@@ -32,8 +32,8 @@ public:
 
 private:
     
-    int exec(const int argc, char** argv);
-    int execLog(const int argc, char** argv);
+    int exec(char** argv);
+    int execLog(char** argv);
     
     int execShell(const char* shell);
     int execShellLog(const char* shell);

src/prtget.cpp

@@ -9,9 +9,7 @@
 //  (at your option) any later version.
 ////////////////////////////////////////////////////////////////////////
 
-#ifdef HAVE_CONFIG_H
 #include <config.h>
-#endif
 
 #include <iostream>
 #include <algorithm>
@@ -72,8 +70,8 @@ PrtGet::PrtGet( const ArgParser* parser )
     m_pkgDB = new PkgDB(m_parser->installRoot());
     readConfig();
 
-    m_useRegex = m_config->useRegex() || m_parser->useRegex();
-    m_followSoftdeps = m_config->followSoftdeps() || m_parser->followSoftdeps();
+    m_useRegex = ( m_config->useRegex() || m_parser->useRegex() );
+    m_followSoftdeps = ( m_config->followSoftdeps() || m_parser->followSoftdeps() );
 }
 
 /*! destruct PrtGet object */
@@ -291,8 +289,13 @@ void PrtGet::listShadowed()
         StringHelper::replaceAll(output, "%p2", p2->path() + "/" + p2->name());
         StringHelper::replaceAll(output, "%v1", p1->versionReleaseString());
         StringHelper::replaceAll(output, "%v2", p2->versionReleaseString());
+        StringHelper::replaceAll(output, "%M1", p1->maintainer());
+        StringHelper::replaceAll(output, "%M2", p2->maintainer());
+        StringHelper::replaceAll(output, "%u1", p1->url());
+        StringHelper::replaceAll(output, "%u2", p2->url());
 
         StringHelper::replaceAll(output, "\\n", "\n");
+        StringHelper::replaceAll(output, "\\t", "\t");
         cout << output;
     }
 }
@@ -591,7 +594,6 @@ void PrtGet::listInstalled()
    install package
    \param update, whether this is an update operation
    \param dependencies, whether to consider dependencies
-
 */
 void PrtGet::install( bool update, bool dependencies )
 {
@@ -612,23 +614,29 @@ void PrtGet::install( bool update, bool dependencies )
         }
     } else {
         for ( ; it != args.end(); ++it ) {
-            string s = *it;
+	    string s = *it;
             if ( m_pkgDB->isInstalled( s ) ) {
-                // pkgadd will fail on these, since it won't be given the -u flag
-		invalidArgs.push_back( s );
+            // pkgadd will fail on these, since it won't be given the -u flag
+	        invalidArgs.push_back( s );
             }
-        }
+	}
     }
 
-    if ( invalidArgs.size() > 0 ) {
-	    string attemptedOp = ( update ) ? "update" : "install";
-	    attemptedOp += " the following packages ";
-	    attemptedOp += ( update ) ? "(not yet installed)" : "(already installed)";
-	    cout << "cannot "<< attemptedOp <<endl;
+    if ( (invalidArgs.size() > 0 && update) || 
+         (invalidArgs.size() == args.size() && !update) ) {
+	    string invalidHeader = "-- Packages installed before this run (ignored)";
+	    if (update) { invalidHeader = "-- Cannot update the following (not yet installed)"; }
+	    if (m_parser->isTest()) {
+		    cout << "*** prt-get: test mode" << endl << endl;
+	    }
+	    cout << invalidHeader << endl;
 	    list<string>::const_iterator it = invalidArgs.begin();
 	    for ( ; it != invalidArgs.end(); ++it ) {
 		    cout << *it << endl;
 	    }
+	    if (m_parser->isTest()) {
+		    cout << "*** prt-get: test mode end" << endl;
+	    }
 	    m_returnValue = PG_GENERAL_ERROR ;
 	    return;
     }
@@ -647,18 +655,17 @@ void PrtGet::install( bool update, bool dependencies )
             cerr << "prt-get: cyclic dependencies found" << endl;
             m_returnValue = PG_GENERAL_ERROR;
             return;
-        } else if ( result == InstallTransaction::PACKAGE_NOT_FOUND ) {
-            warnPackageNotFound(depTransaction);
-            m_returnValue = PG_GENERAL_ERROR;
-            return;
         }
-        const list<string>& depRef = depTransaction.dependencies();
-        list<string>::const_iterator it = depRef.begin();
+        list<string> deps = depTransaction.dependencies();
+	const list< pair<string, string> >& depMissing = depTransaction.missing();
+        list< pair<string,string> >::const_iterator it = depMissing.begin();
 
-        list<string> deps;
-        for (; it != depRef.end(); ++it) {
-            if (!m_pkgDB->isInstalled(*it)) {
-                deps.push_back(*it);
+	// ensure that missing ports are retained for the post-transaction 
+	// summary (FS#1843). Exempt any ports that were installed manually 
+	// or from a repo that has since been deactivated.
+        for (; it != depMissing.end(); ++it) {
+            if (! m_pkgDB->isInstalled(it->first)) {
+                deps.push_back(it->first);
             }
         }
 
@@ -689,47 +696,53 @@ void PrtGet::executeTransaction( InstallTransaction& transaction,
     InstallTransaction::InstallResult result =
         transaction.install( m_parser, update );
     bool failed = false;
-    // TODO: use switch
-    if ( result == InstallTransaction::PACKAGE_NOT_FOUND ) {
-        cout << m_appName << ": package(s) not found" << endl;
-    } else if ( result == InstallTransaction::PKGMK_EXEC_ERROR ) {
-        cout << m_appName << " couldn't excecute pkgmk "
-             << "(or alternative command). "
-             << "Make sure it's installed properly" << endl;
-    } else if ( result == InstallTransaction::PKGMK_FAILURE ) {
-        cout << m_appName << ": error while " << command[0] << endl;
-    } else if ( result == InstallTransaction::NO_PACKAGE_GIVEN ) {
-        cout << m_appName << ": no package specified for "
-             << command[0] << endl;
-    } else if ( result == InstallTransaction::PKGADD_EXEC_ERROR ) {
-        cout << m_appName << " couldn't excecute pkgadd. "
-             << "Make sure it's installed properly" << endl;
-    } else if ( result == InstallTransaction::PKGDEST_ERROR ) {
-        cout << m_appName << ": error changing to PKGDEST directory  "
-             << transaction.getPkgmkPackageDir() << endl;
-        failed = true;
-    } else if ( result == InstallTransaction::PKGADD_FAILURE ) {
-        cout << m_appName << ": error while pkgadding " << endl;
-    } else if ( result == InstallTransaction::LOG_DIR_FAILURE ) {
-        cout << m_appName << ": can't create log file directory " << endl;
-    } else if ( result == InstallTransaction::LOG_FILE_FAILURE ) {
-        cout << m_appName << ": can't create log file" << endl;
-        failed = true;
-    } else if ( result == InstallTransaction::NO_LOG_FILE ) {
-        cout << m_appName << ": no log file specified, but logging enabled"
-             << endl;
-        failed = true;
-    } else if ( result == InstallTransaction::CANT_LOCK_LOG_FILE ) {
-        cout << m_appName << ": can't create lock file for the log file. "
-             << "\nMaybe there's another instance of prt-get using the same "
-             << "file."
-             << "\nIf this is a stale not, please remove "
-            // TODO: file name of lock file
-             << endl;
-        failed = true;
-    } else if ( result != InstallTransaction::SUCCESS ) {
-        cout << m_appName << ": Unknown error " << result << endl;
-        failed = true;
+    switch (result) {
+	    case InstallTransaction::SUCCESS:
+		    break;
+	    case InstallTransaction::PACKAGE_NOT_FOUND:
+		    cout << m_appName << ": package(s) not found" << endl;
+		    break;
+	    case InstallTransaction::PKGMK_FAILURE:
+		    cout << m_appName << ": error while " << command[0] << endl;
+		    break;
+	    case InstallTransaction::NO_PACKAGE_GIVEN:
+		    cout << m_appName << ": no package specified for "
+			    << command[0] << endl;
+		    break;
+	    case InstallTransaction::PKGDEST_ERROR:
+		    cout << m_appName << ": error changing to PKGDEST directory  "
+			    << m_config->packageDir() << endl;
+		    failed = true;
+		    break;
+	    case InstallTransaction::PKGADD_FAILURE:
+		    cout << m_appName << ": error while pkgadding " << endl;
+		    break;
+	    case InstallTransaction::LOG_DIR_FAILURE:
+		    cout << m_appName << ": can't create log file directory " 
+			    << endl;
+		    break;
+	    case InstallTransaction::LOG_FILE_FAILURE:
+		    cout << m_appName << ": can't create log file" << endl;
+		    failed = true;
+		    break;
+	    case InstallTransaction::NO_LOG_FILE:
+		    cout << m_appName << ": no log file specified, but logging enabled"
+			    << endl;
+		    failed = true;
+		    break;
+	    case InstallTransaction::CANT_LOCK_LOG_FILE:
+		    cout << m_appName
+			    << ": can't create lock file for the log file. "
+			    << "\nMaybe there's another instance of prt-get "
+			    << "using the same file."
+			    << "\nIf this is a stale log, please remove "
+			    // TODO: file name of lock file
+			    << endl;
+		    failed = true;
+		    break;
+	    default:
+		    cout << m_appName << ": Unknown error " << result << endl;
+		    failed = true;
     }
 
     if ( !failed ) {
@@ -845,6 +858,10 @@ void PrtGet::readConfig()
         }
     }
 
+    if (!m_config->parsePkgmkConf(1)) {
+	    m_config->parsePkgmkConf(0);
+    }
+
     const list< pair<char*, ArgParser::ConfigArgType> >& configData =
         m_parser->configData();
     list< pair<char*, ArgParser::ConfigArgType> >::const_iterator it =
@@ -890,20 +907,19 @@ void PrtGet::printFormattedDiffLine(const string& name,
                                     const string& versionPortsTree,
                                     bool isLocked)
 {
+    unsigned int minWidth=20;
     cout.setf( ios::left, ios::adjustfield );
-    cout.width( 20 );
+    cout.width( minWidth );
     cout.fill( ' ' );
-    cout <<  name;
+    ( name.size() < minWidth ) ? cout <<  name : cout << name + " ";
 
-    cout.width( 20 );
+    cout.width( minWidth );
     cout.fill( ' ' );
-    cout << versionInstalled;
+    ( versionInstalled.size() < minWidth ) ? cout << versionInstalled :
+	    cout << versionInstalled + " ";
 
-    string locked = "";
-    if ( isLocked ) {
-        locked = "locked";
-    }
-    cout.width( 20 );
+    string locked = ( isLocked ) ? "locked" : "";
+    cout.width( minWidth );
     cout.fill( ' ' );
     cout << versionPortsTree << locked << endl;
 }
@@ -1113,15 +1129,13 @@ void PrtGet::evaluateResult( InstallTransaction& transaction,
         bool atLeastOnePackageHasReadme = false;
 
         for ( ; iit != inst.end(); ++iit ) {
-	    if (m_parser->printPath()) {
-		// TODO: avoid lookup by tuning
-		// InstallTransaction::installedPackages()
-		const Package* p = m_repo->getPackage(iit->first);
-		if (p) {
-		    cout << p->path() << "/";
-		}
+	    size_t pos = (iit->first).find_last_of('/');
+	    if ( m_parser->printPath() || (pos == string::npos)
+			    || (pos+2 > (iit->first).length()) ) {
+                cout << iit->first;
+	    } else {
+	        cout << (iit->first).substr(pos+1);
 	    }
-            cout << iit->first;
             if ( iit->second.hasReadme ) {
                 if ( m_config->readmeMode() ==
                      Configuration::COMPACT_README ) {
@@ -1168,7 +1182,7 @@ void PrtGet::evaluateResult( InstallTransaction& transaction,
 
     cout << endl;
 
-    if ( errors == 0 && !interrupted ) {
+    if ( inst.size() && errors == 0 && !interrupted ) {
         cout << "prt-get: " << command[1] << " successfully" << endl;
     } else {
         m_returnValue = PG_PARTIAL_INSTALL_ERROR;
@@ -1177,20 +1191,21 @@ void PrtGet::evaluateResult( InstallTransaction& transaction,
 
 void PrtGet::reportPrePost(const InstallTransaction::InstallInfo& info) {
     if (info.preState != InstallTransaction::NONEXISTENT) {
-        string preString = "failed";
-        if (info.preState == InstallTransaction::EXEC_SUCCESS) {
-            preString = "ok";
+        string preString = 
+        (info.preState == InstallTransaction::FAILED) ? "failed" : "ok";
+	if (info.preState == InstallTransaction::DEFERRED) {
+                 preString = "deferred";
         }
         cout << " [pre: " << preString << "]";
     }
     if ( info.postState != InstallTransaction::NONEXISTENT) {
-        string postString = "failed";
-        if (info.postState == InstallTransaction::EXEC_SUCCESS){
-            postString = "ok";
+        string postString =
+        (info.postState == InstallTransaction::FAILED) ? "failed" : "ok";
+	if (info.postState == InstallTransaction::DEFERRED) {
+                 postString = "deferred";
         }
         cout << " [post: " << postString << "]";
     }
-
 }
 
 /*! create a cache */
@@ -1259,7 +1274,7 @@ void PrtGet::printf()
     assertExactArgCount(1);
 
     initRepo();
-    string filter = m_parser->useRegex() ? "." : "*";
+    string filter = m_useRegex ? ".*" : "*";
     if ( m_parser->hasFilter() ) {
         filter = m_parser->filter();
     }
@@ -1426,7 +1441,8 @@ void PrtGet::printDependent(const string& dep, int level)
                 dependent.insert( p );
             }
         }
-	if ( p && m_pkgDB->isInstalled(p->name(),false) && m_followSoftdeps
+	if ( p && m_followSoftdeps && 
+	     ( m_parser->all() || m_pkgDB->isInstalled( p->name() ) )
 	       && p->optionals().find( dep ) != string::npos ) {
             list<string> tokens;
             StringHelper::split( p->optionals(), ',', tokens );
@@ -1666,7 +1682,7 @@ void PrtGet::current()
     m_returnValue = 1;
 }
 
-SignalHandler::HandlerResult PrtGet::handleSignal( int signal )
+SignalHandler::HandlerResult PrtGet::handleSignal()
 {
     // TODO: second argument could also be true:
     // TODO: kill installtransaction
@@ -1916,12 +1932,17 @@ void PrtGet::remove()
 {
     assertMinArgCount(1);
 
+    bool needRepo = false;
     list<string> removed;
     list<string> failed;
     list<string> notInstalled;
 
     if ( m_parser->isTest() ) {
         cout << "*** " << m_appName << ": test mode" << endl;
+    } else if ( m_config->removeLogOnUninst()
+        && m_config->logFilePattern().find("%p") != string::npos ) {
+        needRepo = true;
+        initRepo();
     }
 
     string command = InstallTransaction::PKGRM_DEFAULT_COMMAND;
@@ -1933,20 +1954,48 @@ void PrtGet::remove()
     list<char*>::const_iterator it = args.begin();
     for ( ; it != args.end(); ++it ) {
         if (m_pkgDB->isInstalled(*it)) {
-            // TODO: prettify
-            string args = "";
+            string rm_args = "";
             if (m_parser->installRoot() != "") {
-                args = "-r " + m_parser->installRoot() + " ";
+                rm_args = "-r " + m_parser->installRoot() + " ";
             }
-            args += (m_parser->pkgrmArgs() + " " + *it);
+            rm_args += (m_parser->pkgrmArgs() + " " + *it);
 
-            Process proc(command, args);
+            Process proc(command, rm_args);
             if (m_parser->isTest() || proc.executeShell() == 0) {
                 removed.push_back(*it);
                 if (m_locker.isLocked(*it)) {
                     m_locker.unlock(*it);
                     m_locker.store();
                 }
+		if (m_config->removeLogOnUninst() && !m_parser->isTest()) {
+		    string rm_logFile = m_config->logFilePattern();
+		    bool doneSubs=false;
+		    const string pkgname = *it;
+		    StringHelper::replaceAll( rm_logFile, "%n", pkgname );
+		    const string rm_ver = m_pkgDB->getPackageVersion( pkgname );
+		    size_t pos = rm_ver.find_last_of('-');
+		    if (pos != string::npos) {
+		        const string rm_v = rm_ver.substr(0,pos);
+		        const string rm_r = rm_ver.substr(pos+1);
+		        StringHelper::replaceAll( rm_logFile, "%v", rm_v );
+		        StringHelper::replaceAll( rm_logFile, "%r", rm_r );
+		    }
+		    if (! needRepo) {
+			doneSubs=true;
+		    } else if (m_repo->getPackage( pkgname )) {
+		        StringHelper::replaceAll( rm_logFile, "%p",
+			    m_repo->getPackage( pkgname )->path() );
+			doneSubs=true;
+		    } else {
+			cout << "Warning: unable to determine the logfile for "
+			    + pkgname + "; log removal aborted." << endl;
+		    }
+		    struct stat slF;
+		    if ( doneSubs && stat(rm_logFile.c_str(), &slF)==0 
+					&& (slF.st_mode & S_IFMT)==S_IFREG ) {
+		        unlink( rm_logFile.c_str() );
+		    }
+		}
             } else {
                 failed.push_back(*it);
             }
@@ -2230,18 +2279,17 @@ void PrtGet::dumpConfig()
     cout.setf( ios::left, ios::adjustfield );
     cout.width( 20 );
     cout.fill( ' ' );
-    cout << "Pkgmk settings: " << m_config->logFilePattern() << endl;
+    cout << "Pkgmk settings: " << endl;
     cout.setf( ios::left, ios::adjustfield );
     cout.width( 20 );
     cout.fill( ' ' );
-    cout << "  Package dir: " << InstallTransaction::getPkgmkPackageDir() 
+    cout << "  Package dir: " << m_config->packageDir() 
          << endl;
     
     cout.setf( ios::left, ios::adjustfield );
     cout.width( 20 );
     cout.fill( ' ' );
-    cout << "  Compression mode: " 
-         << InstallTransaction::getPkgmkCompressionMode() << endl;
+    cout << "  Compression mode: " << m_config->compressionMode() << endl;
 
 
     cout << endl;

src/prtget.h

@@ -92,7 +92,7 @@ public:
 
     int returnValue() const;
 
-    SignalHandler::HandlerResult handleSignal( int signal );
+    SignalHandler::HandlerResult handleSignal();
 
 protected:
 

src/repository.cpp

@@ -327,20 +327,9 @@ Repository::WriteResult Repository::writeCache( const string& cacheFile )
         const Package* p = it->second;
 
         // TODO: encode
-        hasReadme = noStr;
-        if ( p->hasReadme() ) {
-            hasReadme = yesStr;
-        }
-
-        hasPreInstall = noStr;
-        if ( p->hasPreInstall() ) {
-            hasPreInstall = yesStr;
-        }
-
-        hasPostInstall = noStr;
-        if ( p->hasPostInstall() ) {
-            hasPostInstall = yesStr;
-        }
+        hasReadme = ( p->hasReadme() ) ? yesStr : noStr;
+        hasPreInstall = ( p->hasPreInstall() ) ? yesStr : noStr;
+        hasPostInstall = ( p->hasPostInstall() ) ? yesStr : noStr;
 
         fprintf( fp, "%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n\n",
                  p->name().c_str(),

src/signaldispatcher.cpp

@@ -36,7 +36,7 @@ void SignalDispatcher::dispatch( int signalNumber )
     map<int, SignalHandler*>::iterator it = 
         SignalDispatcher::instance()->m_signalHandlers.find( signalNumber );
     if ( it !=  SignalDispatcher::instance()->m_signalHandlers.end() ) {
-        it->second->handleSignal( signalNumber );
+        it->second->handleSignal();
     } else {
         cerr << "prt-get: caught signal " << signalNumber << endl;
     }

src/signaldispatcher.h

@@ -28,7 +28,7 @@ public:
         EXIT,               /*!< signal handled, exit now */
         CONTINUE            /*!< signal handled, don't exit */
     }; 
-    virtual HandlerResult handleSignal( int signalNumber ) = 0;
+    virtual HandlerResult handleSignal() = 0;
 };
 
 /*!