a65959da42
in mid air aligned to the gravity. This will also enable jumps in section where the gravity is not in the default direction.
692 lines
34 KiB
XML
692 lines
34 KiB
XML
<?xml version="1.0"?>
|
|
|
|
<config>
|
|
<!-- Minimum and maximum kart versions that can be used by this binary.
|
|
Older version will be ignored. -->
|
|
<kart-version min="2" max="2"/>
|
|
|
|
<!-- Minimum and maxium track versions that be be read by this binary.
|
|
Older versions will be ignored. -->
|
|
<track-version min="3" max="6"/>
|
|
|
|
<!-- Maximum number of karts to be used at the same time. This limit
|
|
can easily be increased, but some tracks might not have valid start
|
|
positions for those additional karts. -->
|
|
<karts max-number="20"/>
|
|
|
|
<!-- Scores are the number of points given when the race ends. -->
|
|
<grand-prix>
|
|
<!-- Karts on position 1 and 2 will have 3 more points than the next kart;
|
|
a kart on position 3 and 4 will have two more points than the next;
|
|
and all remaining karts will have one more point than the next. -->
|
|
<points from="1" to="2" points="3"/>
|
|
<points from="3" to="4" points="2"/>
|
|
<points from="5" points="1"/>
|
|
</grand-prix>
|
|
|
|
<!-- Time in follow-the-leader after which karts are removed.
|
|
The last values applies for all remaining karts.
|
|
time-per-kart Additional time added to the interval
|
|
for each kart in the race. -->
|
|
<follow-the-leader intervals="30 20 10"
|
|
time-per-kart="1.5" />
|
|
|
|
<!-- Startup information.
|
|
Penalty: Penalty time if a kart accelerates before GO. -->
|
|
<startup penalty="1" />
|
|
|
|
<!-- How often a news message is going to be displayed before
|
|
it will be ignored. -->
|
|
<news max-display="10"/>
|
|
|
|
<!-- smooth-normals: If the normals (for wheel raycasts) should be smoothened.
|
|
This is a global setting, it still needs to be activated for each
|
|
track individually.
|
|
smooth-angle-limits: If the angle between the normal of a vertex and
|
|
the normal of a triangle are larger than this value, the normal
|
|
of the triangle will be used in interpolating the normals. This
|
|
has the effect of an edge split modifier - if the flat track and (say)
|
|
a wall at a 90 egree angle are not separated, the normal at that
|
|
vertex will be 45 degrees, resulting in completely wrong physics.
|
|
The angle limit in this case will discard the 45 degrees, and use
|
|
the normal of the flat triangle (pointing upwards). In the worst
|
|
case (all three normals discarded, the interpolation will just
|
|
return the normal of the triangle (i.e. de facto no interpolation),
|
|
but it helps making smoothing much more useful without fixing tracks.
|
|
-->
|
|
<physics smooth-normals="true"
|
|
smooth-angle-limit="0.65"/>
|
|
|
|
<!-- The title music. -->
|
|
<music title="main_theme.music"/>
|
|
|
|
<!-- Mostly for debugging: maximum number of history entries -->
|
|
<history max-frames="10000"/>
|
|
|
|
<!-- Replay related values, mostly concerned with saving less data
|
|
and using interpolation instead.
|
|
delta-t Minumum time between saving consecutive transform events.
|
|
delta-pos If the interpolated position is within this delta, a
|
|
transform event is not generated.
|
|
delta-angle If the interpolated angle is within this delta,
|
|
a transform event is not generated. -->
|
|
<replay delta-t="0.05" delta-pos="0.1" delta-angle="0.5" />
|
|
|
|
<!-- Skidmark data: maximum number of skid marks, and
|
|
time for skidmarks to fade out. -->
|
|
<skid-marks max-number="100" fadeout-time="60"/>
|
|
|
|
<!-- Defines when the upright constraint should be acctive, it's
|
|
disabled when the kart is more than this value from the track. -->
|
|
<near-ground distance="2"/>
|
|
|
|
<!-- How long the end animation will be shown. -->
|
|
<delay-finish time="0.5"/>
|
|
|
|
<!-- How long the music credits are shown. -->
|
|
<credits music="10"/>
|
|
|
|
<!-- weight is the additional weight an anvil adds to a kart.
|
|
speed-factor is the additional slowdown caused by the anvil.
|
|
time is the time an anvil is active. -->
|
|
<anvil time="2.0" weight="150" speed-factor="0.2"/>
|
|
|
|
<!-- friction is the friction increase when a parachute is attached.
|
|
time is the time an attached parachute is active
|
|
time-other is the time a parachute attached from other kart works
|
|
lbound-fraction is the lower bound fraction of speed when lost will
|
|
detach parachute. E.g. at nearly 0 speed, only 5% of speed
|
|
need to be lost.
|
|
ubound-fraction is the upper bound fraction of speed when lost will
|
|
detach parachute. E.g. at max-speed 30% of speed must be lost.
|
|
max-speed is a factor that decides the impact of rate of speed
|
|
(distance between bounds) -->
|
|
<parachute friction="2.0" time="4.0" time-other="8.0"
|
|
lbound-fraction="0.95" ubound-fraction="0.7" max-speed="23"/>
|
|
|
|
<!-- time is the time till a bomb explodes. time-increase is the time added
|
|
to timer when bomb is passed on. -->
|
|
<bomb time="30.0" time-increase="-5.0"/>
|
|
|
|
<!-- Powerup collect-mode decides what is collected if a kart has already an
|
|
powerup: same: get one more item of the same type.
|
|
new: always get a new item.
|
|
only-if-same: if the random item is the same one as the
|
|
one currently owned, increase the number, otherwise
|
|
no more/new item s are given to the kart. -->
|
|
<powerup collect-mode="new"/>
|
|
<!-- time: How long a switch is being effective.
|
|
items for each item list the index of the item it is switched with.
|
|
Order: giftbox, banana, big-nitro, small-nitro, bubble-gum, trigger,
|
|
nolok-bubble-gum, easter egg -->
|
|
<switch time="5" items="1 0 4 4 2 5 2 7"/>
|
|
|
|
<!-- disappear-counter: How often bubblegum gets driven over before it disappears.
|
|
shield-time: How long the bubblegum shield lasts
|
|
restrict-weapons: If true, using weapons will destroy the user's shield -->
|
|
<bubblegum disappear-counter="1" shield-time="10.0" restrict-weapons="false"/>
|
|
|
|
<!-- explosion-impulse-objects is the impulse that pushes physical objects
|
|
away if there is an explosion. -->
|
|
<explosion impulse-objects="500.0" />
|
|
|
|
<!-- Networking - the current networking code is outdated and will not
|
|
work anymore - so for now don't enable this. -->
|
|
<networking enable="false"/>
|
|
|
|
<!-- disable-while-unskid: Disable steering when stop skidding during
|
|
the time it takes to adjust the physical body with the graphics.
|
|
camera-follow-skid: If true the camera will stay behind the kart,
|
|
potentially making it easier to see where the kart is going to
|
|
after a skid. -->
|
|
<steer disable-while-unskid="false"
|
|
camera-follow-skid="true" />
|
|
|
|
<!-- Default values for all karts
|
|
============================ -->
|
|
<general-kart-defaults>
|
|
|
|
<!-- Camera: Distance between kart and camera.
|
|
forward-up-angle: Angle between camera and plane of kart (pitch)
|
|
when the camera is pointing forward
|
|
backward-up-angke: Angle between camera and plane of kart (pitch)
|
|
when the camera is pointing backwards. This is usually
|
|
larger than the forward-up-angle, since the kart itself
|
|
otherwise obstricts too much of the view. -->
|
|
<camera distance="1.5" forward-up-angle="15"
|
|
backward-up-angle="30"/>
|
|
|
|
<!-- Jump animation related values:
|
|
animation-time: only if the estimated time for a jump is larger
|
|
than this value will the jump animation being
|
|
shown. -->
|
|
<jump animation-time="0.5" />
|
|
|
|
<!-- Skidding: increase: multiplicative increase of skidding factor in each frame.
|
|
decrease: multiplicative decrease of skidding factor in each frame.
|
|
max: maximum skidding factor = maximum increase of steering angle.
|
|
time-till-max: Time till maximum skidding is reached.
|
|
visual: Additional graphical rotation of kart. The graphical rotation
|
|
of the kart also determines the direction the kart is driving to
|
|
when skidding is stopped.
|
|
visual-time: How long it takes for the visual skid to reach maximum.
|
|
revert-visual-time: how long it takes when stopping a skid to revert
|
|
the visual skid and bring visuals and physics in sync again.
|
|
angular-velocity: Angular velocity to be used for the kart when skidding.
|
|
min-speed: Minimum speed a kart must have before it can skid. Must be
|
|
>0, otherwise the kart can skid at the start of the race.
|
|
time-till-bonus: How long a kart needs to skid in order to get a bonus.
|
|
bonus-force: A speedup applied to the kart whick skidded for a while.
|
|
bonus-time: How long the bonus-force is applied.
|
|
bonus-force: Additional engine force (this is used to offset the fact
|
|
that turning after skidding (e.g. to correct direction) often uses
|
|
up the skid bonus).
|
|
post-skid-rotate-factor: a factor to be used to determine how much
|
|
the chassis of a kart should rotate to match the graphical view.
|
|
A factor of 1 is identical, a smaller factor will rotate the kart
|
|
less (which might feel better).
|
|
physical-jump-time: Time for a physical jump at the beginning of a skid.
|
|
graphical-jump-time: Time for a graphics-only jump at the beginning
|
|
of a skid.
|
|
reduce-turn-min/max: The steering done by the controller (which is in
|
|
[-1,1]) is mapped to [reduce-turn-min, reduce-turn-max] when skidding
|
|
is active (for left turn, right turn will use [-max, -min]). The
|
|
effect is that while you skid (say left) you can adjust the direction
|
|
of the turn the kart is doing somewhat by steering to the left and right,
|
|
but you will always keep on doing a left turn, just more or less. -->
|
|
|
|
<!-- Kart-specific settings used by the AI.
|
|
use-slipstream: if the AI should try to overtake karts using slipstream.
|
|
disable-slipstream-usage: even if the AI is not trying to use slipstream,
|
|
it can get a lot of bonus, esp. on easy since the AI creates trains.
|
|
Set this to true to make sure AI does not get any slipstream bonus.
|
|
shield-incoming-radius: Radius at which projectiles will be detected and
|
|
trigger a shield usage.
|
|
false-start-probability: Probability of a false start.
|
|
min/max-start-delay: Minimum and maximum start delay.
|
|
See http://www.humanbenchmark.com/tests/reactiontime/stats.php
|
|
Average reaction time is around 0.215 s.
|
|
nitro-usage: "none", "some", "all": if nitro should be used, and
|
|
how much the AI should try to use it good.
|
|
non-random-item-usage: If true, use items in a sophisticated way,
|
|
otherwise use items randomly.
|
|
collect-avoid-items: if the AI should collect and avoid items,
|
|
or just ignore them.
|
|
handle-bomb: If the AI should actively try to pass on a bomb.
|
|
skidding-threshold: only for old-style skidding: when sharp turn
|
|
should be triggered. Smaller values means it will sharp turn
|
|
earlier, resulting in better driving in thight curves.
|
|
|
|
|
|
max-item-angle: Items that would need more than this change in
|
|
direction are not considered for collection.
|
|
time-full-steer is the time for the AI to go from neutral steering to
|
|
extreme left (or right). This can be used to reduce
|
|
'shaking' of AI karts caused by changing steering direction
|
|
too often. It also helps with making it easier to push the
|
|
AI karts (otherwise micro-corrections make this nearly
|
|
impossible). A value of 1/maxFPS / 2 will guarantee that
|
|
the wheel can go from -1 to +1 steering in one frame,
|
|
basically disabling this mechanism.
|
|
bad-item-closeness is the maximum distance between a good and a
|
|
bad item which can force the AI to abandon a good item in order
|
|
to avoid hitting a bad item. If the distance is larger, it is
|
|
assumed that there will be enough time to change steering
|
|
direction.
|
|
straight-length-for-zipper is the minimum length a straight
|
|
section of the track should have in order to activate a zipper.
|
|
|
|
competitive when ahead of the player, or more competitive
|
|
when behind the player.
|
|
|
|
skid-probability: Since the AI is usually very good at using
|
|
skidding, this is used to implement some rubber-banding for
|
|
the AI: depending on distance to the player, the AI will
|
|
change the probability of skidding. This attributes takes
|
|
a space-separated list of "distance:probability" pairs
|
|
(negative distances meaning the kart is behind the player,
|
|
a positive number that the AI is ahead of the player).
|
|
Then list should have at least 2 entries. Depending on
|
|
the actualy distance the kart has the probability is then
|
|
linearly interpolated (if the AI is more than the largest
|
|
distance ahead, the value for the largest distance is used,
|
|
and similarly if the kart is more than the minimum value
|
|
behind).
|
|
speed-cap: Fraction of maximum speed the kart should drive
|
|
at. Used to slow down karts that are ahead of the player.
|
|
Note that setting this to a value >1 does NOT increase
|
|
the speed the kart can drive at!
|
|
collect-item-probability: Probability of the AI actually
|
|
trying to collect an item (if an item is selected for
|
|
collection in the first place).
|
|
-->
|
|
<ai>
|
|
<easy time-full-steer="0.1"
|
|
straight-length-for-zipper="35"
|
|
use-slipstream="false"
|
|
disable-slipstream-usage="true"
|
|
shield-incoming-radius="0"
|
|
false-start-probability="0.08"
|
|
min-start-delay="0.3" max-start-delay="0.5"
|
|
nitro-usage="none"
|
|
non-random-item-usage="false"
|
|
collect-avoid-items="false"
|
|
handle-bomb="false"
|
|
speed-cap="-10:1.0 -5:0.9 5:0.8 20:0.7 50:0.6"
|
|
max-item-angle="0.7" max-item-angle-high-speed="0.3"
|
|
bad-item-closeness="6"
|
|
collect-item-probability="0:0"
|
|
rb-skid-probability="0:0.0"
|
|
skidding-threshold="4.0"
|
|
/>
|
|
<medium time-full-steer="0.1"
|
|
straight-length-for-zipper="35"
|
|
use-slipstream="false"
|
|
disable-slipstream-usage="false"
|
|
shield-incoming-radius="10"
|
|
false-start-probability="0.04"
|
|
min-start-delay="0.25" max-start-delay="0.4"
|
|
nitro-usage="some"
|
|
non-random-item-usage="true"
|
|
collect-avoid-items="true"
|
|
handle-bomb="false"
|
|
speed-cap="10:1.0 50:0.8"
|
|
max-item-angle="0.7" max-item-angle-high-speed="0.3"
|
|
bad-item-closeness="6"
|
|
collect-item-probability="-10:1.0 0:0"
|
|
rb-skid-probability="0:0.0"
|
|
skidding-threshold="3.0"
|
|
/>
|
|
<hard time-full-steer="0.1"
|
|
straight-length-for-zipper="35"
|
|
use-slipstream="true"
|
|
disable-slipstream-usage="false"
|
|
shield-incoming-radius="10"
|
|
false-start-probability="0.01"
|
|
min-start-delay="0.15" max-start-delay="0.28"
|
|
nitro-usage="all"
|
|
non-random-item-usage="true"
|
|
collect-avoid-items="true"
|
|
handle-bomb="true"
|
|
speed-cap="20:1.0 50:0.8"
|
|
max-item-angle="0.7" max-item-angle-high-speed="0.3"
|
|
bad-item-closeness="6"
|
|
collect-item-probability="10:1.0 20:0"
|
|
rb-skid-probability="-50:1.0 -20:0.7 20:0.2 50:0.0"
|
|
skidding-threshold="2.0"
|
|
/>
|
|
<best time-full-steer="0.1"
|
|
straight-length-for-zipper="35"
|
|
use-slipstream="true"
|
|
disable-slipstream-usage="false"
|
|
shield-incoming-radius="10"
|
|
false-start-probability="0.0"
|
|
min-start-delay="0.15" max-start-delay="0.2"
|
|
nitro-usage="all"
|
|
non-random-item-usage="true"
|
|
collect-avoid-items="true"
|
|
handle-bomb="true"
|
|
speed-cap="0:1.0"
|
|
max-item-angle="0.7" max-item-angle-high-speed="0.3"
|
|
bad-item-closeness="6"
|
|
collect-item-probability="0:1.0"
|
|
rb-skid-probability="0:1.0"
|
|
skidding-threshold="2.0"
|
|
/>
|
|
</ai>
|
|
|
|
<!-- Suspension related values. stiffness: kart's suspension stiffness.
|
|
rest: Length of suspension when at rest.
|
|
travel-cm: maximum movement of suspension - in cm!!
|
|
exp-string-response: dampen the suspension spring reaction
|
|
exponentially.
|
|
max-force: Maximum suspension force -->
|
|
<suspension stiffness="248" rest="0.2" travel-cm="19"
|
|
exp-spring-response="false" max-force="12000"/>
|
|
|
|
<!-- Wheel related parameters: damping-relaxation/compression: for
|
|
bullet, damping parameters. Radius and width of wheel.
|
|
front-right, front-left, rear-right and rear-left give the
|
|
position of the physics raycast wheels relative to the center of
|
|
gravity. Default is to use the corners of the chassis to attach
|
|
the wheels to. -->
|
|
<wheels damping-relaxation="20" damping-compression="4.4" radius="0.25">
|
|
<front-right position="0.38 0 0.6" />
|
|
<front-left position="-0.38 0 0.6" />
|
|
<rear-right position="0.38 0 -0.6" />
|
|
<rear-left position="-0.38 0 -0.6"/>
|
|
</wheels>
|
|
|
|
<!-- Parameters for the speed-weighted objects:
|
|
a bigger value for strength-factor leads to the speed of the kart more quickly affecting
|
|
the strength of the animation (up to a maximum value that corresponds to the original animation) -->
|
|
<speed-weighted-objects strength-factor="0.05" speed-factor="1.0" texture-speed-x="0.0" texture-speed-y="0.0"/>
|
|
|
|
<!-- friction: slip used for bullet skidding. A high value
|
|
(like 10000000) disables bullet skidding. -->
|
|
<friction slip="10000000"/>
|
|
|
|
<!-- Values related to stability of the chassis: damping, and reduced
|
|
impact of roll.
|
|
downward-impulse-factor: A speed proportional impulse applied each
|
|
frame that pushes the vehicle onto the ground.
|
|
track-connection-accel: An artificial force that pulls a wheel to
|
|
the ground if its off ground. Reduces the affect if a kart loses
|
|
contact with the ground (i.e. it then can't steer or accelerate
|
|
anymore). -->
|
|
<stability roll-influence="0.03"
|
|
chassis-linear-damping="0.2"
|
|
chassis-angular-damping="0"
|
|
downward-impulse-factor="0"
|
|
track-connection-accel="2"/>
|
|
|
|
<!-- collision
|
|
impulse-type: STK can apply an additional impulse in case of
|
|
kart-track collision:
|
|
'none' : no additional impulse
|
|
'normal': impulse along the normal
|
|
'driveline': impulse towards the nearest driveline.
|
|
An impulse towards the driveline works nice when the kart is
|
|
driving more or less correctly on the track - it pushes the
|
|
kart in the right direction. But if the kart is significanlty
|
|
off track, it has severe problems (since an incorrect
|
|
driveline point can be selected, pusing the kart in the
|
|
wrong direction, sometimes even causing a 'zip-along-obstacle'
|
|
effect.
|
|
impulse: an additional impulse to be applied in a non-frontal
|
|
collision to push two karts away from each other.
|
|
impulse-time: The impulse will be applied over a certain time
|
|
period, which results in less abrupt changes. If set to 0,
|
|
the impulse is only applied once.
|
|
resitution: restitution value to be used for the kart rigid bodies.
|
|
bevel-factor: for each point of the chassis collision box one
|
|
additional point is added, resulting in a bevelled box shape.
|
|
The original Z coordinate of the chassis is multiplied by
|
|
1-bevelZ (i.e. the main box part of the shape is shortened).
|
|
The bevel point has the original Z coordinate, and the X and
|
|
Y coordinates of the box are multiplied with (1-bevelX) and
|
|
(1-bevelY). A value of 0 for all bevel coordinates disables
|
|
bevelling, and uses a simple box shape.
|
|
As an example, a value of 1 for x and z will result in a
|
|
sharp 'arrow' like shape. -->
|
|
<collision impulse-type="normal"
|
|
impulse="3000" impulse-time="0.1" terrain-impulse="8000"
|
|
restitution="1.0" bevel-factor="0.5 0.0 0.5" />
|
|
|
|
<!-- If a kart starts within the specified time after 'go',
|
|
it receives the corresponding bonus from 'boost'. Those
|
|
fields must have the same size, and must be sorted by
|
|
increasing times. -->
|
|
<startup time = "0.3 0.5"
|
|
boost = "6 3" />
|
|
|
|
<!-- Rescue: time: How long it takes the kart to be raised.
|
|
height: how height the kart will be raised before it is
|
|
dropped back onto the track.
|
|
vert rescue offset: used to raise karts a bit higher before
|
|
releasing them on the ground after a rescue. Used to avoid
|
|
resetting karts into the track. Not sure if this is still
|
|
necessary. -->
|
|
<rescue vert-offset="0.0" time="1.2" height="2"/>
|
|
|
|
<!-- Nitro: engine-force: additional engine power
|
|
consumption: nitro consumption - heavier characters can be set
|
|
to need more nitro than lighter character.
|
|
small-container: how much energy a small container gives.
|
|
big-container: how much energy a big container gives.
|
|
max-speed-increase: How much the speed of a kart might exceed
|
|
its maximum speed (in m/s).
|
|
duration: How long the increased speed will be valid after
|
|
the kart stops using nitro (and the fade-out-time starts).
|
|
fade-out-time: Duration during which the increased maximum
|
|
speed due to nitro fades out.
|
|
max: How much nitro a kart can store.
|
|
-->
|
|
<nitro engine-force="500" consumption="1" small-container="1" big-container="3"
|
|
max-speed-increase="5" duration="1" fade-out-time="2" max="20"/>
|
|
|
|
<!-- Bubble gum data:
|
|
time: How long the bubblegum lasts.
|
|
speed-fraction: To what fraction of top-speed the speed is reduced.
|
|
torque: To rotate the kart somewhat.
|
|
fade-in-time: How quick the slowdown takes effect.
|
|
-->
|
|
<bubblegum time="1" speed-fraction="0.3" torque="500" fade-in-time="0.01"/>
|
|
|
|
|
|
<!-- time: Time a zipper is active.
|
|
force: Additional zipper force.
|
|
speed-gain: One time additional speed.
|
|
max-speed-increase: Additional speed allowed on top of the
|
|
kart-specific maximum kart speed.
|
|
fade-out-time: determines how long it takes for a zipper
|
|
to fade out (after 'time').
|
|
-->
|
|
<zipper time="3.5" force="250.0" speed-gain="4.5" max-speed-increase="15"
|
|
fade-out-time="1.0" />
|
|
|
|
<!-- Skidding: increase: multiplicative increase of skidding factor in each frame.
|
|
decrease: multiplicative decrease of skidding factor in each frame.
|
|
max: maximum skidding factor = maximum increase of steering angle.
|
|
time-till-max: Time till maximum skidding is reached.
|
|
visual: Additional graphical rotation of kart. The graphical rotation
|
|
of the kart also determines the direction the kart is driving to
|
|
when skidding is stopped.
|
|
visual-time: How long it takes for the visual skid to reach maximum.
|
|
revert-visual-time: how long it takes when stopping a skid to revert
|
|
the visual skid and bring visuals and physics in sync again.
|
|
angular-velocity: Angular velocity to be used for the kart when skidding.
|
|
min-speed: Minimum speed a kart must have before it can skid. Must be
|
|
>0, otherwise the kart can skid at the start of the race.
|
|
time-till-bonus: How long a kart needs to skid in order to get a bonus.
|
|
bonus-force: A speedup applied to the kart whick skidded for a while.
|
|
bonus-time: How long the bonus-force is applied.
|
|
bonus-force: Additional engine force (this is used to offset the fact
|
|
that turning after skidding (e.g. to correct direction) often uses
|
|
up the skid bonus).
|
|
post-skid-rotate-factor: a factor to be used to determine how much
|
|
the chassis of a kart should rotate to match the graphical view.
|
|
A factor of 1 is identical, a smaller factor will rotate the kart
|
|
less (which might feel better).
|
|
physical-jump-time: Time for a physical jump at the beginning of a skid.
|
|
graphical-jump-time: Time for a graphics-only jump at the beginning
|
|
of a skid.
|
|
reduce-turn-min/max: The steering done by the controller (which is in
|
|
[-1,1]) is mapped to [reduce-turn-min, reduce-turn-max] when skidding
|
|
is active (for left turn, right turn will use [-max, -min]). The
|
|
effect is that while you skid (say left) you can adjust the direction
|
|
of the turn the kart is doing somewhat by steering to the left and right,
|
|
but you will always keep on doing a left turn, just more or less. -->
|
|
<skid increase="1.05" decrease="0.95" max="2.5" time-till-max="0.5"
|
|
visual="1.25" visual-time="0.7" revert-visual-time="0.7"
|
|
min-speed="10" time-till-bonus="1.0 3.0"
|
|
bonus-speed="4.5 6.5" bonus-time="3.0 4.0"
|
|
bonus-force="250 350"
|
|
physical-jump-time="0" graphical-jump-time="0.4"
|
|
post-skid-rotate-factor="1"
|
|
reduce-turn-min="0.2" reduce-turn-max="0.8"/>
|
|
|
|
|
|
<!-- Slipstream: length: How far behind a kart slipstream works
|
|
width: how wide slipstream works furthest away from the kart.
|
|
collect-time: How many seconds of sstream give maximum benefit
|
|
use-time: How long the benefit will last.
|
|
add-power: Additional power due to sstreaming. 1 = +100%
|
|
min-speed: Minimum speed necessary for slipstream to take effect.
|
|
max-speed-increase: How much the speed of the kart might exceed
|
|
its normal maximum speed.
|
|
duration: How long the higher speed lasts after slipstream stopped
|
|
working.
|
|
fade-out-time: How long the slip stream speed increase will
|
|
gradually be reduced. -->
|
|
|
|
<slipstream length="10" width="2" collect-time="2" use-time="5"
|
|
add-power="3" min-speed="10"
|
|
max-speed-increase="5" duration="1" fade-out-time="2"/>
|
|
|
|
|
|
<!-- Kart-specific settings for the swatter:
|
|
duration: how long can the swatter be active.
|
|
distance: How close a kart or an item must be before it can be hit.
|
|
squash-duration: How long a kart will remain squashed.
|
|
squash-slowdown: percentage of max speed that a kart is
|
|
restricted to. -->
|
|
<swatter duration="10" distance="3" squash-duration="5"
|
|
squash-slowdown="0.5"/>
|
|
|
|
<!-- Leaning related parameters, i.e. slightly leaning the karts when
|
|
driving a fast curve.
|
|
max: maximum leaning (i.e. when steering as much as possible at highest
|
|
speed), in degrees.
|
|
sped: Speed with which the leaning changes (in degree/second). -->
|
|
<lean max="8.6" speed="5.0" />
|
|
|
|
<!-- turn-radius defines the turn radius of the kart at
|
|
a given speed. The actual steering angle is dependent on the
|
|
wheel base of the kart: radius = wheel_base/sin(steering_angle).
|
|
The values below define that at speed 0 the turn radius is 2, at
|
|
speed 10 the radius is 7.5 etc.
|
|
The actual turn radius is piece-wise linearly interpolated. This
|
|
allows for tighter turning at lower speeds, and also avoids that
|
|
the kart becomes too hard to control at high speed (speeds of higher
|
|
than 23 can only be reached with powerups).
|
|
time-full-steer: This is the amount of change in steering depending
|
|
on current steering. So if the steering is between 0 and 0.5,
|
|
the time-for-steering-change is 0.15. If the current steering is
|
|
between 0.5 and 1.0, the time-for-steering-change is 0.25.
|
|
The speed is used as dt/time-for-steering-change.
|
|
In short: steering at less than halfway is somewhat faster,
|
|
which should avoid oversteering (by pressing the key for too long),
|
|
but slower when you want to steer more. Overwall with the current
|
|
settings the expected time-to-full-steer is:
|
|
0.5 * 0.25 + 0.5 * 0.15 = 0.2 ... which is overall the same
|
|
time we had previously.
|
|
-->
|
|
<turn turn-radius="0:2.0 10:7.5 25:15 45:30"
|
|
time-full-steer ="0:0.15 0.5:0.15 0.5:0.25 1.0:0.25"
|
|
time-reset-steer="0.1" />
|
|
|
|
<!-- Speed and acceleration related values: power and max-speed (in m/s)
|
|
have 3 values, one for low, medium, and hard.
|
|
brake-factor: Value used when braking. max-speed-reverse-ratio is
|
|
the percentage of max speed for reverse gear. -->
|
|
<engine power="450 475 500 510" max-speed="17 21 23 25" brake-factor="11.0"
|
|
max-speed-reverse-ratio="0.3"/>
|
|
|
|
<!-- Simulated gears: switch-ratio defines at what ratio of the maximum
|
|
speed what gear is selected, e.g. 0.25 means that if the speed is
|
|
bigger or equal to 0.25 x maxSpeed then use gear 1, 0.5 means if
|
|
the speed is bigger or equal to 0.5 x maxSpeed then gear 2.
|
|
gear-power-increase contains the increase in max power (to simulate
|
|
different gears), e.g. 2.5 as first entry means: 2.5*maxPower in gear 1
|
|
| first | second | third | . -->
|
|
<gear switch-ratio="0.25 0.7 1.0" power-increase="2.2 1.7 1.3"/>
|
|
|
|
<!-- mass -->
|
|
<mass value="225"/>
|
|
|
|
<!-- Kart-specific plunger and rubber band handling: max-length is
|
|
the maximum length of rubber band before it snaps. force is
|
|
the force a plunger/rubber band applies to the kart(s).
|
|
duration is the duration a rubber band acts.
|
|
in-face-time determines how long it takes before a plunger
|
|
in your face is removed. -->
|
|
<plunger band-max-length="50" band-force="1500" band-duration="1"
|
|
band-speed-increase="7" band-fade-out-time="3"
|
|
in-face-time="3 4 4.5 4.5"/>
|
|
|
|
<!-- Kart-specific explosion parameters.
|
|
Time: how long it takes before the kart can drive again (this
|
|
determines how height the kart is being thrown).
|
|
Invulnerability-time: how long a kart will be invulnerable
|
|
after being hit by an explosion.
|
|
radius: Kart closer to this value will be affected by
|
|
an explosion as well. -->
|
|
<explosion time="2" radius="5"
|
|
invulnerability-time="6" />
|
|
|
|
<kart-type>
|
|
<light>
|
|
<startup time = "0.3 0.5"
|
|
boost = "8.5 4.5" />
|
|
|
|
<nitro engine-force="350" consumption="1" small-container="1" big-container="3"
|
|
max-speed-increase="4.5" duration="1.5" fade-out-time="2.5" max="20"/>
|
|
|
|
<slipstream length="11" width="2" collect-time="1.5" use-time="2.5"
|
|
add-power="3.2" min-speed="9"
|
|
max-speed-increase="4" duration="1.2" fade-out-time="2.3"/>
|
|
|
|
<turn turn-radius="0:3.0 10:10.0 25:20.0 45:40.0"
|
|
time-full-steer ="0:0.15 0.5:0.15 0.5:0.25 1.0:0.25"
|
|
time-reset-steer="0.1"/>
|
|
|
|
<engine power="250 300 350 400" max-speed="15.8 18.8 23.85 30.0" brake-factor="15.0"
|
|
max-speed-reverse-ratio="0.3"/>
|
|
|
|
<gear switch-ratio="0.20 0.55 1" power-increase="5 4 3"/>
|
|
|
|
<mass value="195"/>
|
|
|
|
<explosion time="2.1" radius="5.5"
|
|
invulnerability-time="7" />
|
|
</light>
|
|
|
|
<medium>
|
|
<startup time = "0.3 0.5"
|
|
boost = "4.2 2.6" />
|
|
|
|
<nitro engine-force="425" consumption="1.4" small-container="1" big-container="3"
|
|
max-speed-increase="5" duration="1.2" fade-out-time="2" max="20"/>
|
|
|
|
<slipstream length="10" width="2" collect-time="2" use-time="3.3"
|
|
add-power="2.8" min-speed="10"
|
|
max-speed-increase="5" duration="0.9" fade-out-time="1.6"/>
|
|
|
|
<turn turn-radius="0:4.5 10:16.0 25:30.0 45:60.0"
|
|
time-full-steer ="0:0.17 0.5:0.17 0.5:0.28 1.0:0.28"
|
|
time-reset-steer="0.1"/>
|
|
|
|
<engine power="425 500 575 600" max-speed="15 20 23.2 27" brake-factor="11.0"
|
|
max-speed-reverse-ratio="0.4"/>
|
|
|
|
<gear switch-ratio="0.30 0.7 1.0" power-increase="2.2 2.2 2.5"/>
|
|
|
|
<mass value="250"/>
|
|
|
|
<explosion time="1.8" radius="5"
|
|
invulnerability-time="6" />
|
|
</medium>
|
|
|
|
<heavy>
|
|
<startup time = "0.3 0.5"
|
|
boost = "3.8 2" />
|
|
|
|
<nitro engine-force="600" consumption="2" small-container="1" big-container="3"
|
|
max-speed-increase="8" duration="0.7" fade-out-time="1.3" max="20"/>
|
|
|
|
<slipstream length="8.5" width="2" collect-time="2" use-time="4"
|
|
add-power="2.7" min-speed="10.5"
|
|
max-speed-increase="8" duration="0.7" fade-out-time="1"/>
|
|
|
|
<swatter duration="10" distance="3" squash-duration="5"
|
|
squash-slowdown="0.5"/>
|
|
|
|
<turn turn-radius="0:4.0 10:18.5 25:43.0 45:72.5"
|
|
time-full-steer ="0:0.23 0.5:0.23 0.5:0.41 1.0:0.41"
|
|
time-reset-steer="0.1"/>
|
|
|
|
<engine power="600 700 800 900" max-speed="15 20 23 25" brake-factor="10"
|
|
max-speed-reverse-ratio="0.65"/>
|
|
|
|
<gear switch-ratio="0.45 0.70 1" power-increase="1.5 1.7 2.5"/>
|
|
|
|
<mass value="350"/>
|
|
|
|
<explosion time="1.5" radius="4"
|
|
invulnerability-time="6" />
|
|
</heavy>
|
|
</kart-type>
|
|
</general-kart-defaults>
|
|
</config>
|