stk-code_catmod/data/stk_config.xml

<?xml version="1.0"?>

<config>

<!-- STK PARAMETERS

min-kart-version and max-kart-version are the the minimum and maximum .kart
files supported. Older/newer files are ignored.

min-track-version and max-track-version are the minimum and maximum .track
files supported, older/newer files are ignored.

max-karts is maximum number of karts.
scores are the number of points given when the race ends.
grid-order is the grand prix order, 1 = most points 1st, 0 = least points 1st.
title-music is umm... the title music.

mainmenu-background and menu-background must have the same length, containing
all the possible main menu and background images.

max-history is the maximum number of history frames.

max-skidmarks is the max. number o skidmarks per kart.
skid-fadeout-time is the time till the skid marks fade out

slowdown-factor is the engine reduction depending on terrain; see kart for
details

near-ground is the distance above ground when the upright constraint will be
disabled to allow more violent explosions.

delay-finish-time is the delay till the race results are displayed
music-credit-time is the time for which the music credits are displayed
final-camera-time is the time for the final camera to reach it's destination

-->

<stk-parameters
    min-kart-version="1"
    max-kart-version="1"
    min-track-version="1"
    max-track-version="1"
    max-karts="8"
    scores="10 8 6 5 4 3 2 1"
    grid-order="1"
    title-music="main_theme.music"
    mainmenu-background="st_title_screen.rgb st_title_screen2.rgb"
    menu-background="menu_background.rgb menu_background2.rgb"
    max-history="10000"
    max-skidmarks="100"
    skid-fadeout-time="60"
    slowdown-factor="10"
    near-ground="2"
    delay-finish-time="10"
    music-credit-time="10"
    final-camera-time="1.5"
/>

<!-- ATTACHMENT PARAMETERS

anvil-weight is the additional weight an anvil adds to a kart
anvil-speed-factor is the additional slowdown caused by the anvil
parachute-friction is the friction increase when a parachute is attached
parachute-time is the time an attached parachute is active
parachute-time-other is the time a parachute attached from other kart works
parachute-done-fraction is the fraction of speed when lost will detach
parachute

bomb-time is the time till a bomb explodes
bomb-time-increase is the time added to timer when bomb is passed on
leader-intervals is the time till a kart is removed in follow leader mode
anvil-time is the time an anvil is active
zipper-time is the time a zipper is active
zipper-force is the additional zipper force
zipper-speed-gain is the one time additional speed  
-->

<attachment-parameters
    anvil-weight="150.0"
    anvil-speed-factor="0.2"
    parachute-friction="2.0"
    parachute-time="4.0"
    parachute-time-other="8.0"
    parachute-done-fraction="0.7"
    bomb-time="30.0"
    bomb-time-increase="-5.0"
    leader-intervals="30 20 10"
    anvil-time="2.0"
    zipper-time="3.5"
    zipper-force="250.0"
    zipper-speed-gain="4.5"
    zipper-max-speed-fraction="2.0"
/>

<!-- GENERAL KART DEFAULTS

time-full-steer = is the time when a player's input goes from neutral
steering to extreme left or right.

time-full-steer-ai is the time for the AI to go from neutral steering to
extreme left (or right). This can be used to reduce 'shaking' of AI karts
caused by changing steering direction too often. It also helps with making it
easier to push the AI karts (otherwise micro-corrections make this nearly
impossible). A value of 1/maxFPS / 2 will guarantee that the wheel can go from
-1 to +1 steering in one frame, basically  disabling this mechanism.

gravity-center-shift is the shift of the chassis with regards to the center of
mass. E.g. with the the value commented out below the chassis will be 30 cm
higher than the  center of mass - or the center of mass will be 30 cm lower
than the  middle of the chassis. So this effectively lowers the center of
mass, making the kart more stable and less likely to topple over. Default (if
nothing is defined here) is that the center of the mass is at the very bottom
of the chassis!

nitro-power-boost is the increase in engine power, i.e. 1=plus 100%

skid-increase: multiplicative increase of skidding factor in each frame.
skid-decrease: multiplicative decrease of skidding factor in each frame.
skid-max: maximum skidding factor = maximum increase of steering angle.
time-till-max-skid: Time till maximum skidding is reached.
skid-visual: Additional graphical rotation of kart.
slipstrea slipstream-length: How far behind a kart slipstream works
slipstream-time: How many seconds of sstream give  maximum benefit
slipstream-add-power: Additional power due to sstreaming. 1 = +100%
slipstream-min-speed: Minimum speed necessary for slipstream to take effect.

min-speed-radius and max-speed-radius define the smallest turn radius at
lowest speed (4.64 m at speed 0) and at high speed (13.5 m at speed 12 m/s).
Maximum steering angles for speeds in between will be interpolated. This
allows for tighter turns at lower speeds. The actual steering  angle is
dependent on the wheel base of the kart:
radius = wheel_base/sin(steering_angle)
By specifying the radius the steering behaviour can be defined independent
of the kart size.


engine-power and max-speed have 3 values, one for hard, medium and low
difficulties; Max speed right now would be 116 101 90 km/h.

mass: kart's mass
suspension-stiffness: kart's suspension stiffness

max-speed-reverse-ratio is the percentage of max speed for reverse gear

jump-velocity is the z-axis velocity set when a jump is initiated. This
will cause the kart to start rising, till it is pulled back by gravity.
A higher value means higher Z velocity, meaning the kart will rise faster
and higher, and will be in the air longer
   
z-rescue-offset is the z-axis offset when kart is being put back on track
after being rescued, it's a fraction of kart height

gear-switch-ratio defines at what ratio of the maximum speed what gear is
selected, e.g. 0.25 means that if the speed is bigger or equal to 0.25 x
maxSpeed then use gear 1, 0.5 means if the speed is bigger or equal to 0.5 x
maxSpeed then gear 2.

gear-power-increase contains the increase in max power (to simulate
different gears), e.g. 2.5 as first entry means: 2.5*maxPower in gear 1
| first  | second |  third | .

wheel-front-right, wheel-front-left, wheel-rear-right and wheel-rear-left
give the position of the physics raycast wheels relative to the center of
gravity. Default is to use the corners of the chassis to attach the wheels
to.

rubber-band-max-length is the maximum length of rubber band

rubber-band-force is the force a plunger/rubber band applies to the kart(s).

rubber-band-duration is the duration a rubber band acts.
-->

<general-kart-defaults 
    wheel-base="1.2"
    heightCOG="0.2"
    time-full-steer="0.2"
    time-full-steer-ai="0.1"
    corn-f ="4"
    corn-r="4"
    gravity-center-shift="0 0 0.3"
    nitro-power-boost="3"

    skid-increase="1.05"
    skid-decrease="0.95"
    skid-max="2.5"
    time-till-max-skid="0.4"
    skid-visual="0.16"
    slipstream-length="5"
    slipstream-time="5"
    slipstream-add-power="3"
    slipstream-min-speed="15"

    brake-factor="11.0"
    min-speed-radius="0 3"
    max-speed-radius="10 15.0"
    engine-power="400 400 300"
    max-speed="32.22 28 25"
    mass="225"
    suspension-stiffness="48.0"
    wheel-damping-relaxation="20"
    wheel-damping-compression="4.4"
    friction-slip="10000000"
    roll-influence="0.03"
    wheel-radius="0.25"
    wheel-width="0.3"
    chassis-linear-damping="0.2"
    chassis-angular-damping="30.2"
    max-speed-reverse-ratio="0.3"
    suspension-rest="0.2"
    suspension-travel-cm="19"
    jump-velocity="3.0"
    z-rescue-offset="0.0"
    wheel-front-right="0.38  0.6 0"
    wheel-front-left="-0.38  0.6 0"
    wheel-rear-right="0.38 -0.6 0"
    wheel-rear-left="-0.38 -0.6 0"
    gear-switch-ratio="0.25 0.7 1.0"
    gear-power-increase="2.2 1.7 1.3"
    upright-tolerance="0.2"
    upright-max-force="30"
    track-connection-accel="2"
    rubber-band-max-length="50"
    rubber-band-force="1500"
    rubber-band-duration="1"
    camera-max-accel="10"
    camera-max-brake="10"
    camera-distance="3.0"
/>

<!-- MISC DEFAULTS

shortcut-length is the length that when leaving the road and coming back on
it more than X 'meters"
    later is considered to be a shortcut

offroad-tolerance widens the road % for shortcut detection.

enable-networking is a boolean value that enables / disables networking
explosion-impulse is the push from explosions when karts aren't hit directly
explosion-impulse-objects 500.0 is the impulse for  physics objects (smaller
ones like the cone, will be pushed way too far
-->

<misc-defaults
    shortcut-length="90"
    offroad-tolerance="0.15"
    enable-networking="f"
    explosion-impulse="10000.0"
    explosion-impulse-objects="500.0"
/>

</config>