Rob French
|
d2213e34ff
|
Raduino: Disabled CAT in the Raduino main loop. Fixed some split freq setting via I2C. TeensyDSP: Added a Keyer. Works ok, but I have to disable ADC during transmit (or all of CW?) in order to keep the timing good... need to use interrupts and/or continuous ADC at some point. Added the MD CAT command, and fixed other CAT commands. Split seems to work, but don't do split when using the keyer! Halted the Raduino.
|
2021-02-11 23:55:41 -06:00 |
|
Rob French
|
814fe6c733
|
Did add some code for updating the RigState architecture. Not ready to swap it out yet, however.
|
2021-02-11 22:00:24 -06:00 |
|
Rob French
|
c3cc9a7cf7
|
Got basic 3-way comm (CAT-Teensy-Raduino) working. CAT commands are received via Serial by the Teensy. Data is passed on to the Raduino via I2C. Had to add an intermediate step in the protocol in order for the Raduino to request a byte as a flag for whether or not any changed data was coming, and then if so, request the changed data. There are certainly some optimizations that could be made on this number. Currently, the Raduino code is very clunky. In addition, the Rig and RigState classes have deteriorated somewhat.
|
2021-02-10 00:10:24 -06:00 |
|
Rob French
|
aeeec69daf
|
Raduino changes are getting to TeensyDSP over I2C. TeensyDSP successfully receiving some CAT.
|
2021-02-09 22:58:07 -06:00 |
|
Rob French
|
4186fdcdd4
|
Scary commit. I've taken baby steps toward passing rig status between the Raduino and the TeensyDSP using I2C. Compiles, but has not been tested. Need to create a branch.
|
2021-02-05 22:59:31 -06:00 |
|
Rob French
|
88143f57a2
|
Updated Raduino code with some old code from the ubitx-v5d repository, in order to suppress the key line (prevent inadvertant transmitting when I first start working this).
|
2021-01-20 23:54:28 -06:00 |
|
Rob French
|
c93e191dfd
|
More reorg.
|
2021-01-20 23:26:38 -06:00 |
 Rob French
|
04b70450ae
|
Reorganized.
|
2021-01-20 20:50:27 -06:00 |