scrape/ubitx-v5d
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity

for 0.26version commit1

Browse Source
This commit is contained in:
phdlee
2018-01-12 09:54:38 +09:00
parent f563e74a4e
commit f9050ebb11
4 changed files with 161 additions and 24 deletions
Download Patch File Download Diff File Expand all files Collapse all files

2
ubitx_20/cat_libs.ino
View File

@@ -629,6 +629,7 @@ void Check_Cat(byte fromType)
}
else if (Serial.available() < 5)
{
/*
//First Arrived
if (rxBufferCheckCount == 0)
{
@@ -648,6 +649,7 @@ void Check_Cat(byte fromType)
rxBufferCheckCount = Serial.available();
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
}
*/
return;
}

105
ubitx_20/ubitx_20.ino
View File

@@ -148,8 +148,12 @@ int count = 0; //to generally count ticks, loops, etc
#define VFO_B_MODE 257
#define CW_DELAY 258
#define CW_START 259
#define HAM_BAND_COUNT 260 //
#define TX_TUNE_TYPE 261 //
#define HAM_BAND_RANGE 262 //FROM (2BYTE) TO (2BYTE) * 10 = 40byte
#define HAM_BAND_FREQS 302 //40, 1 BAND = 4Byte most bit is mode
//
//Check Firmware type and version
#define VERSION_ADDRESS 779 //check Firmware version
//USER INFORMATION
#define USER_CALLSIGN_KEY 780 //0x59
@@ -228,7 +232,7 @@ byte sideTonePitch=0;
byte sideToneSub = 0;
//DialLock
byte isDialLock = 0;
byte isDialLock = 0; //000000[0]vfoB [0]vfoA 0Bit : A, 1Bit : B
byte isTxOff = 0;
//Variables for auto cw mode
@@ -264,6 +268,69 @@ boolean modeCalibrate = false;//this mode of menus shows extended menus to calib
* you start hacking around
*/
//Ham Band
#define MAX_LIMIT_RANGE 10 //because limited eeprom size
byte useHamBandCount = 0; //0 use full range frequency
byte tuneTXType = 0; //0 : use full range, 1 : just Change Dial speed, 2 : just ham band change, but can general band by tune, 3 : only ham band
//100 : use full range but not TX on general band, 101 : just change dial speed but.. 2 : jut... but.. 3 : only ham band
unsigned int hamBandRange[MAX_LIMIT_RANGE][2]; // = //Khz because reduce use memory
//-1 : not found, 0 ~ 9 : Hamband index
char getIndexHambanBbyFreq(unsigned long f)
{
f = f / 1000;
for (byte i = 0; i < useHamBandCount; i++)
if (hamBandRange[i][0] <= f && f < hamBandRange[i][1])
return i;
return -1;
}
//when Band change step = just hamband
//moveDirection : 1 = next, -1 : prior
void setNextHamBandFreq(unsigned long f, char moveDirection)
{
unsigned long resultFreq = 0;
byte loadMode = 0;
char findedIndex = getIndexHambanBbyFreq(f);
if (findedIndex == -1) { //out of hamband
f = f / 1000;
for (byte i = 0; i < useHamBandCount -1; i++) {
if (hamBandRange[i][1] <= f && f < hamBandRange[i + 1][0]) {
findedIndex = i + moveDirection;
//return (unsigned long)(hamBandRange[i + 1][0]) * 1000;
}
} //end of for
}
else if (((moveDirection == 1) && (findedIndex < useHamBandCount -1)) || //Next
((moveDirection == -1) && (findedIndex > 0)) ) { //Prior
findedIndex += moveDirection;
}
else
findedIndex = -1;
if (findedIndex == -1)
findedIndex = (moveDirection == 1 ? 0 : useHamBandCount -1);
EEPROM.get(HAM_BAND_FREQS + 4 * findedIndex, resultFreq);
loadMode = (byte)(resultFreq >> 30);
resultFreq = resultFreq & 0x3FFFFFFF;
if ((resultFreq / 1000) < hamBandRange[findedIndex][0] || (resultFreq / 1000) > hamBandRange[findedIndex][1])
resultFreq = (unsigned long)(hamBandRange[findedIndex][0]) * 1000;
setFrequency(resultFreq);
byteWithFreqToMode(loadMode);
}
void saveBandFreqByIndex(unsigned long f, unsigned long mode, byte bandIndex) {
if (bandIndex >= 0)
EEPROM.put(HAM_BAND_FREQS + 4 * bandIndex, (f & 0x3FFFFFFF) | (mode << 30) );
}
/*
KD8CEC
When using the basic delay of the Arduino, the program freezes.
@@ -381,6 +448,12 @@ void setFrequency(unsigned long f){
void startTx(byte txMode, byte isDisplayUpdate){
unsigned long tx_freq = 0;
//Check Hamband only TX //Not found Hamband index by now frequency
if (tuneTXType >= 100 && getIndexHambanBbyFreq(ritOn ? ritTxFrequency : frequency) == -1) {
//no message
return;
}
if (isTxOff != 1)
digitalWrite(TX_RX, 1);
@@ -502,7 +575,8 @@ void doTuning(){
unsigned long prev_freq;
int incdecValue = 0;
if (isDialLock == 1)
if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
(vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02)))
return;
if (isCWAutoMode == 0 || cwAutoDialType == 1)
@@ -636,6 +710,23 @@ void initSettings(){
//Version Write for Memory Management Software
if (EEPROM.read(VERSION_ADDRESS) != VERSION_NUM)
EEPROM.write(VERSION_ADDRESS, VERSION_NUM);
//Ham Band Count
EEPROM.get(HAM_BAND_COUNT, useHamBandCount);
EEPROM.get(TX_TUNE_TYPE, tuneTXType);
if ((3 < tuneTXType && 100 < tuneTXType) || 103 < tuneTXType || useHamBandCount < 1)
tuneTXType = 0;
//Read band Information
for (byte i = 0; i < useHamBandCount; i++) {
unsigned int tmpReadValue = 0;
EEPROM.get(HAM_BAND_RANGE + 4 * i, tmpReadValue);
hamBandRange[i][0] = tmpReadValue;
EEPROM.get(HAM_BAND_RANGE + 4 * i + 2, tmpReadValue);
hamBandRange[i][1] = tmpReadValue;
}
if (cwDelayTime < 1 || cwDelayTime > 250)
cwDelayTime = 60;
@@ -715,11 +806,13 @@ void initPorts(){
void setup()
{
//Init EEProm for Fault EEProm TEST and Factory Reset
/*
for (int i = 0; i < 1024; i++)
//Init EEProm for Fault EEProm TEST and Factory Reset
//for (int i = 0; i < 1024; i++)
for (int i = 16; i < 1024; i++) //protect Master_cal, usb_cal
EEPROM.write(i, 0);
*/
//Serial.begin(9600);
lcd.begin(16, 2);
@@ -736,7 +829,7 @@ void setup()
else
{
printLineF(0, F("uBITX v0.20"));
delay_background(500, 0);
delay(500);
printLine2("");
}

75
ubitx_20/ubitx_menu.ino
View File

@@ -15,12 +15,8 @@
int menuBand(int btn){
int knob = 0;
int band;
unsigned long offset;
int stepChangeCount = 0;
// band = frequency/1000000l;
// offset = frequency % 1000000l;
if (!btn){
printLineF2(F("Band Select?"));
return;
@@ -33,6 +29,18 @@ int menuBand(int btn){
Check_Cat(0); //To prevent disconnections
}
byte currentBandIndex = -1;
//Save Band Information
if (tuneTXType == 2 || tuneTXType == 3 || tuneTXType == 102 || tuneTXType == 103) { //only ham band move
//Get Now Band Index
currentBandIndex = getIndexHambanBbyFreq(frequency);
if (currentBandIndex >= 0) {
//Save Frequency to Band Frequncy Record
saveBandFreqByIndex(frequency, modeToByte(), currentBandIndex);
}
}
delay(50);
ritDisable();
@@ -50,16 +58,35 @@ int menuBand(int btn){
else
isUSB = false;
setFrequency(((unsigned long)band * 1000000l) + offset); */
if (knob < 0 && frequency > 3000000l)
setFrequency(frequency - 200000l);
if (knob > 0 && frequency < 30000000l)
setFrequency(frequency + 200000l);
if (frequency > 10000000l)
isUSB = true;
else
isUSB = false;
if (tuneTXType == 2 || tuneTXType == 3 || tuneTXType == 102 || tuneTXType == 103) { //only ham band move
if (knob < 0) {
if (stepChangeCount-- < -3) {
setNextHamBandFreq(frequency, -1); //Prior Band
stepChangeCount = 0;
}
}
else if (knob > 0) {
if (stepChangeCount++ > 3) {
setNextHamBandFreq(frequency, 1); //Next Band
stepChangeCount = 0;
}
}
}
else { //original source
if (knob < 0 && frequency > 3000000l)
setFrequency(frequency - 200000l);
if (knob > 0 && frequency < 30000000l)
setFrequency(frequency + 200000l);
if (frequency > 10000000l)
isUSB = true;
else
isUSB = false;
}
updateDisplay();
}
delay(20);
Check_Cat(0); //To prevent disconnections
}
@@ -89,6 +116,14 @@ void byteToMode(byte modeValue){
else
isUSB = 0;
}
void byteWithFreqToMode(byte modeValue){
if (modeValue == 3)
isUSB = 1;
else if (modeValue == 0) //Not Set
isUSB = (frequency > 10000000l) ? true : false;
else
isUSB = 0;
}
void menuVfoToggle(int btn)
{
@@ -677,11 +712,14 @@ void menuSetupCwTone(int btn){
}
void setDialLock(byte tmpLock, byte fromMode) {
isDialLock = tmpLock;
if (tmpLock == 1)
isDialLock |= (vfoActive == VFO_A ? 0x01 : 0x02);
else
isDialLock &= ~(vfoActive == VFO_A ? 0x01 : 0x02);
if (fromMode == 2 || fromMode == 3) return;
if (isDialLock == 1)
if (tmpLock == 1)
printLineF2(F("Dial Lock ON"));
else
printLineF2(F("Dial Lock OFF"));
@@ -706,7 +744,10 @@ void doMenu(){
//btnDownTimeCount++;
//check long time Down Button -> 3 Second
if (btnDownTimeCount++ > (2000 / 50)) {
setDialLock(isDialLock == 1 ? 0 : 1, 0); //Reverse Dialo lock
if (vfoActive == VFO_A)
setDialLock((isDialLock & 0x01) == 0x01 ? 0 : 1, 0); //Reverse Dial lock
else
setDialLock((isDialLock & 0x02) == 0x02 ? 0 : 1, 0); //Reverse Dial lock
return;
}
}

3
ubitx_20/ubitx_ui.ino
View File

@@ -251,7 +251,8 @@ void updateDisplay() {
// strcat(c, " TX");
printLine(1, c);
if (isDialLock == 1) {
if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
(vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
lcd.setCursor(5,1);
lcd.write((uint8_t)0);
}