lcdtest and extended ubutton tested
This commit is contained in:
phdlee
parent
f600c18541
commit
5611e1c0ff
@ -19,20 +19,23 @@
|
|||||||
//==============================================================================
|
//==============================================================================
|
||||||
// Compile Option
|
// Compile Option
|
||||||
//==============================================================================
|
//==============================================================================
|
||||||
#define ENABLE_FACTORYALIGN
|
|
||||||
#define ENABLE_ADCMONITOR //Starting with Version 1.07, you can read ADC values directly from uBITX Manager. So this function is not necessary.
|
|
||||||
|
|
||||||
//Depending on the type of LCD mounted on the uBITX, uncomment one of the options below.
|
//Depending on the type of LCD mounted on the uBITX, uncomment one of the options below.
|
||||||
//You must select only one.
|
//You must select only one.
|
||||||
//#define UBITX_DISPLAY_LCD1602P //LCD mounted on unmodified uBITX
|
//#define UBITX_DISPLAY_LCD1602P //LCD mounted on unmodified uBITX
|
||||||
//#define UBITX_DISPLAY_LCD1602I //I2C type 16 x 02 LCD
|
//#define UBITX_DISPLAY_LCD1602I //I2C type 16 x 02 LCD
|
||||||
#define UBITX_DISPLAY_LCD1602I_CUST //I2C type 16 x 02 Custom Tiny Library
|
#define UBITX_DISPLAY_LCD2004P //24 x 04 LCD (Parallel)
|
||||||
//#define UBITX_DISPLAY_LCD2004P //24 x 04 LCD
|
|
||||||
//#define UBITX_DISPLAY_LCD2004I //I2C type 24 x 04 LCD
|
//#define UBITX_DISPLAY_LCD2004I //I2C type 24 x 04 LCD
|
||||||
|
|
||||||
|
#define I2C_DISPLAY_ADDRESS 0x3F //0x27 //DEFAULT, if Set I2C Address by uBITX Manager, read from EEProm
|
||||||
|
|
||||||
//#define EXTEND_KEY_GROUP1 //MODE, BAND(-), BAND(+), STEP
|
//#define EXTEND_KEY_GROUP1 //MODE, BAND(-), BAND(+), STEP
|
||||||
//#define EXTEND_KEY_GROUP2 //Numeric (0~9), Point(.), Enter //Not supported in Version 1.0x
|
//#define EXTEND_KEY_GROUP2 //Numeric (0~9), Point(.), Enter //Not supported in Version 1.0x
|
||||||
|
|
||||||
|
#define ENABLE_FACTORYALIGN
|
||||||
|
#define ENABLE_ADCMONITOR //Starting with Version 1.07, you can read ADC values directly from uBITX Manager. So this function is not necessary.
|
||||||
|
|
||||||
|
#define SMeterLatency 3 //1 is 0.25 sec
|
||||||
|
|
||||||
//==============================================================================
|
//==============================================================================
|
||||||
// Hardware, Define PIN Usage
|
// Hardware, Define PIN Usage
|
||||||
//==============================================================================
|
//==============================================================================
|
||||||
|
|||||||
@ -1000,10 +1000,10 @@ void initSettings(){
|
|||||||
{
|
{
|
||||||
//Default Setting
|
//Default Setting
|
||||||
arTuneStep[0] = 10;
|
arTuneStep[0] = 10;
|
||||||
arTuneStep[1] = 20;
|
arTuneStep[1] = 50;
|
||||||
arTuneStep[2] = 50;
|
arTuneStep[2] = 100;
|
||||||
arTuneStep[3] = 100;
|
arTuneStep[3] = 500;
|
||||||
arTuneStep[4] = 200;
|
arTuneStep[4] = 1000;
|
||||||
}
|
}
|
||||||
|
|
||||||
if (tuneStepIndex == 0) //New User
|
if (tuneStepIndex == 0) //New User
|
||||||
|
|||||||
@ -20,34 +20,8 @@
|
|||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
**************************************************************************/
|
**************************************************************************/
|
||||||
#ifdef UBITX_DISPLAY_LCD1602P
|
|
||||||
|
|
||||||
|
//Common Defines *********************************************************
|
||||||
//========================================================================
|
|
||||||
//Begin of TinyLCD Library by KD8CEC
|
|
||||||
//========================================================================
|
|
||||||
/*************************************************************************
|
|
||||||
LCD1602_TINY Library for 16 x 2 LCD
|
|
||||||
Referecnce Source : LiquidCrystal.cpp
|
|
||||||
KD8CEC
|
|
||||||
|
|
||||||
This source code is modified version for small program memory
|
|
||||||
from Arduino LiquidCrystal Library
|
|
||||||
|
|
||||||
I wrote this code myself, so there is no license restriction.
|
|
||||||
So this code allows anyone to write with confidence.
|
|
||||||
But keep it as long as the original author of the code.
|
|
||||||
DE Ian KD8CEC
|
|
||||||
**************************************************************************/
|
|
||||||
#define LCD_Command(x) (LCD_Send(x, LOW))
|
|
||||||
#define LCD_Write(x) (LCD_Send(x, HIGH))
|
|
||||||
|
|
||||||
//Define connected PIN
|
|
||||||
#define LCD_PIN_RS 8
|
|
||||||
#define LCD_PIN_EN 9
|
|
||||||
uint8_t LCD_PIN_DAT[4] = {10, 11, 12, 13};
|
|
||||||
|
|
||||||
// commands
|
|
||||||
#define LCD_CLEARDISPLAY 0x01
|
#define LCD_CLEARDISPLAY 0x01
|
||||||
#define LCD_RETURNHOME 0x02
|
#define LCD_RETURNHOME 0x02
|
||||||
#define LCD_ENTRYMODESET 0x04
|
#define LCD_ENTRYMODESET 0x04
|
||||||
@ -85,6 +59,39 @@ uint8_t LCD_PIN_DAT[4] = {10, 11, 12, 13};
|
|||||||
#define LCD_5x10DOTS 0x04
|
#define LCD_5x10DOTS 0x04
|
||||||
#define LCD_5x8DOTS 0x00
|
#define LCD_5x8DOTS 0x00
|
||||||
|
|
||||||
|
// flags for backlight control
|
||||||
|
#define LCD_BACKLIGHT 0x08
|
||||||
|
#define LCD_NOBACKLIGHT 0x00
|
||||||
|
|
||||||
|
//========================================================================
|
||||||
|
//Begin of TinyLCD Library by KD8CEC
|
||||||
|
//========================================================================
|
||||||
|
|
||||||
|
#ifdef UBITX_DISPLAY_LCD1602P
|
||||||
|
/*************************************************************************
|
||||||
|
LCD1602_TINY Library for 16 x 2 LCD
|
||||||
|
Referecnce Source : LiquidCrystal.cpp
|
||||||
|
KD8CEC
|
||||||
|
|
||||||
|
This source code is modified version for small program memory
|
||||||
|
from Arduino LiquidCrystal Library
|
||||||
|
|
||||||
|
I wrote this code myself, so there is no license restriction.
|
||||||
|
So this code allows anyone to write with confidence.
|
||||||
|
But keep it as long as the original author of the code.
|
||||||
|
DE Ian KD8CEC
|
||||||
|
**************************************************************************/
|
||||||
|
|
||||||
|
#define LCD_Command(x) (LCD_Send(x, LOW))
|
||||||
|
#define LCD_Write(x) (LCD_Send(x, HIGH))
|
||||||
|
|
||||||
|
#define UBITX_DISPLAY_LCD1602_BASE
|
||||||
|
|
||||||
|
//Define connected PIN
|
||||||
|
#define LCD_PIN_RS 8
|
||||||
|
#define LCD_PIN_EN 9
|
||||||
|
uint8_t LCD_PIN_DAT[4] = {10, 11, 12, 13};
|
||||||
|
|
||||||
void write4bits(uint8_t value)
|
void write4bits(uint8_t value)
|
||||||
{
|
{
|
||||||
for (int i = 0; i < 4; i++)
|
for (int i = 0; i < 4; i++)
|
||||||
@ -167,20 +174,176 @@ void LCD_CreateChar(uint8_t location, uint8_t charmap[])
|
|||||||
for (int i=0; i<8; i++)
|
for (int i=0; i<8; i++)
|
||||||
LCD_Write(charmap[i]);
|
LCD_Write(charmap[i]);
|
||||||
}
|
}
|
||||||
|
#endif
|
||||||
//========================================================================
|
//========================================================================
|
||||||
//End of TinyLCD Library by KD8CEC
|
//End of TinyLCD Library by KD8CEC
|
||||||
//========================================================================
|
//========================================================================
|
||||||
|
|
||||||
/*
|
|
||||||
#include <LiquidCrystal.h>
|
//========================================================================
|
||||||
LiquidCrystal lcd(8,9,10,11,12,13);
|
//Begin of I2CTinyLCD Library by KD8CEC
|
||||||
*/
|
//========================================================================
|
||||||
|
#ifdef UBITX_DISPLAY_LCD1602I
|
||||||
|
#include <Wire.h>
|
||||||
|
/*************************************************************************
|
||||||
|
I2C Tiny LCD Library
|
||||||
|
Referecnce Source : LiquidCrystal_I2C.cpp // Based on the work by DFRobot
|
||||||
|
KD8CEC
|
||||||
|
|
||||||
|
This source code is modified version for small program memory
|
||||||
|
from Arduino LiquidCrystal_I2C Library
|
||||||
|
|
||||||
|
I wrote this code myself, so there is no license restriction.
|
||||||
|
So this code allows anyone to write with confidence.
|
||||||
|
But keep it as long as the original author of the code.
|
||||||
|
Ian KD8CEC
|
||||||
|
**************************************************************************/
|
||||||
|
#define UBITX_DISPLAY_LCD1602_BASE
|
||||||
|
|
||||||
|
#define En B00000100 // Enable bit
|
||||||
|
#define Rw B00000010 // Read/Write bit
|
||||||
|
#define Rs B00000001 // Register select bit
|
||||||
|
|
||||||
|
#define LCD_Command(x) (LCD_Send(x, 0))
|
||||||
|
#define LCD_Write(x) (LCD_Send(x, Rs))
|
||||||
|
|
||||||
|
uint8_t _Addr;
|
||||||
|
uint8_t _displayfunction;
|
||||||
|
uint8_t _displaycontrol;
|
||||||
|
uint8_t _displaymode;
|
||||||
|
uint8_t _numlines;
|
||||||
|
uint8_t _cols;
|
||||||
|
uint8_t _rows;
|
||||||
|
uint8_t _backlightval;
|
||||||
|
|
||||||
|
#define printIIC(args) Wire.write(args)
|
||||||
|
|
||||||
|
void expanderWrite(uint8_t _data)
|
||||||
|
{
|
||||||
|
Wire.beginTransmission(_Addr);
|
||||||
|
printIIC((int)(_data) | _backlightval);
|
||||||
|
Wire.endTransmission();
|
||||||
|
}
|
||||||
|
|
||||||
|
void pulseEnable(uint8_t _data){
|
||||||
|
expanderWrite(_data | En); // En high
|
||||||
|
delayMicroseconds(1); // enable pulse must be >450ns
|
||||||
|
|
||||||
|
expanderWrite(_data & ~En); // En low
|
||||||
|
delayMicroseconds(50); // commands need > 37us to settle
|
||||||
|
}
|
||||||
|
|
||||||
|
void write4bits(uint8_t value)
|
||||||
|
{
|
||||||
|
expanderWrite(value);
|
||||||
|
pulseEnable(value);
|
||||||
|
}
|
||||||
|
|
||||||
|
void LCD_Send(uint8_t value, uint8_t mode)
|
||||||
|
{
|
||||||
|
uint8_t highnib=value&0xf0;
|
||||||
|
uint8_t lownib=(value<<4)&0xf0;
|
||||||
|
write4bits((highnib)|mode);
|
||||||
|
write4bits((lownib)|mode);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// Turn the (optional) backlight off/on
|
||||||
|
void noBacklight(void) {
|
||||||
|
_backlightval=LCD_NOBACKLIGHT;
|
||||||
|
expanderWrite(0);
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight(void) {
|
||||||
|
_backlightval=LCD_BACKLIGHT;
|
||||||
|
expanderWrite(0);
|
||||||
|
}
|
||||||
|
|
||||||
|
void LCD1602_Init()
|
||||||
|
{
|
||||||
|
//I2C Init
|
||||||
|
_Addr = I2C_DISPLAY_ADDRESS;
|
||||||
|
_cols = 16;
|
||||||
|
_rows = 2;
|
||||||
|
_backlightval = LCD_NOBACKLIGHT;
|
||||||
|
Wire.begin();
|
||||||
|
|
||||||
|
delay(50);
|
||||||
|
|
||||||
|
// Now we pull both RS and R/W low to begin commands
|
||||||
|
expanderWrite(_backlightval); // reset expanderand turn backlight off (Bit 8 =1)
|
||||||
|
delay(1000);
|
||||||
|
//put the LCD into 4 bit mode
|
||||||
|
// this is according to the hitachi HD44780 datasheet
|
||||||
|
// figure 24, pg 46
|
||||||
|
|
||||||
|
// we start in 8bit mode, try to set 4 bit mode
|
||||||
|
write4bits(0x03 << 4);
|
||||||
|
delayMicroseconds(4500); // wait min 4.1ms
|
||||||
|
|
||||||
|
// second try
|
||||||
|
write4bits(0x03 << 4);
|
||||||
|
delayMicroseconds(4500); // wait min 4.1ms
|
||||||
|
|
||||||
|
// third go!
|
||||||
|
write4bits(0x03 << 4);
|
||||||
|
delayMicroseconds(150);
|
||||||
|
|
||||||
|
// finally, set to 4-bit interface
|
||||||
|
write4bits(0x02 << 4);
|
||||||
|
|
||||||
|
// finally, set # lines, font size, etc.
|
||||||
|
LCD_Command(LCD_FUNCTIONSET | LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS | LCD_2LINE);
|
||||||
|
|
||||||
|
// turn the display on with no cursor or blinking default
|
||||||
|
LCD_Command(LCD_DISPLAYCONTROL | LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF);
|
||||||
|
|
||||||
|
// clear it off
|
||||||
|
LCD_Command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
|
||||||
|
//delayMicroseconds(2000); // this command takes a long time!
|
||||||
|
delayMicroseconds(1000); // this command takes a long time!
|
||||||
|
|
||||||
|
LCD_Command(LCD_ENTRYMODESET | LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT);
|
||||||
|
|
||||||
|
backlight();
|
||||||
|
}
|
||||||
|
|
||||||
|
void LCD_Print(const char *c)
|
||||||
|
{
|
||||||
|
for (uint8_t i = 0; i < strlen(c); i++)
|
||||||
|
{
|
||||||
|
if (*(c + i) == 0x00) return;
|
||||||
|
LCD_Write(*(c + i));
|
||||||
|
}
|
||||||
|
}
|
||||||
|
|
||||||
|
void LCD_SetCursor(uint8_t col, uint8_t row)
|
||||||
|
{
|
||||||
|
LCD_Command(LCD_SETDDRAMADDR | (col + row * 0x40)); //0 : 0x00, 1 : 0x40, only for 16 x 2 lcd
|
||||||
|
}
|
||||||
|
|
||||||
|
void LCD_CreateChar(uint8_t location, uint8_t charmap[])
|
||||||
|
{
|
||||||
|
location &= 0x7; // we only have 8 locations 0-7
|
||||||
|
LCD_Command(LCD_SETCGRAMADDR | (location << 3));
|
||||||
|
for (int i=0; i<8; i++)
|
||||||
|
LCD_Write(charmap[i]);
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
//========================================================================
|
||||||
|
//End of I2CTinyLCD Library by KD8CEC
|
||||||
|
//========================================================================
|
||||||
|
|
||||||
|
|
||||||
|
//========================================================================
|
||||||
|
// 16 X 02 LCD Routines
|
||||||
|
//Begin of Display Base Routines (Init, printLine..)
|
||||||
|
//========================================================================
|
||||||
|
#ifdef UBITX_DISPLAY_LCD1602_BASE
|
||||||
|
|
||||||
//SWR GRAPH, DrawMeter and drawingMeter Logic function by VK2ETA
|
//SWR GRAPH, DrawMeter and drawingMeter Logic function by VK2ETA
|
||||||
#define OPTION_SKINNYBARS
|
#define OPTION_SKINNYBARS
|
||||||
|
|
||||||
//========================================================================
|
|
||||||
//Begin of Display Base Routines (Init, printLine..)
|
|
||||||
//========================================================================
|
|
||||||
char c[30], b[30];
|
char c[30], b[30];
|
||||||
char printBuff[2][17]; //mirrors what is showing on the two lines of the display
|
char printBuff[2][17]; //mirrors what is showing on the two lines of the display
|
||||||
|
|
||||||
@ -589,9 +752,9 @@ void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
|
|||||||
|
|
||||||
byte testValue = 0;
|
byte testValue = 0;
|
||||||
char checkCount = 0;
|
char checkCount = 0;
|
||||||
|
char checkCountSMeter = 0;
|
||||||
|
|
||||||
int currentSMeter = 0;
|
int currentSMeter = 0;
|
||||||
//byte sMeterLevels[] = {0, 1, 4, 10, 18, 35, 63, 91, 117}; //John's default Value (divide / 4)
|
|
||||||
byte scaledSMeter = 0;
|
byte scaledSMeter = 0;
|
||||||
|
|
||||||
void idle_process()
|
void idle_process()
|
||||||
@ -621,9 +784,10 @@ void idle_process()
|
|||||||
*/
|
*/
|
||||||
|
|
||||||
//S-Meter Display
|
//S-Meter Display
|
||||||
if ((displayOption1 & 0x08) == 0x08 && (sdrModeOn == 0))
|
if (((displayOption1 & 0x08) == 0x08 && (sdrModeOn == 0)) && (++checkCountSMeter > SMeterLatency))
|
||||||
{
|
{
|
||||||
int newSMeter;
|
int newSMeter;
|
||||||
|
checkCountSMeter = 0; //Reset Latency time
|
||||||
|
|
||||||
//VK2ETA S-Meter from MAX9814 TC pin / divide 4 by KD8CEC for reduce EEPromSize
|
//VK2ETA S-Meter from MAX9814 TC pin / divide 4 by KD8CEC for reduce EEPromSize
|
||||||
newSMeter = analogRead(ANALOG_SMETER);
|
newSMeter = analogRead(ANALOG_SMETER);
|
||||||
@ -1,512 +0,0 @@
|
|||||||
/*************************************************************************
|
|
||||||
KD8CEC, _______
|
|
||||||
uBITX Display Routine for LCD1602 I2C
|
|
||||||
|
|
||||||
1.Code for 16 x 2 LCD for I2C.
|
|
||||||
2.Display related functions of uBITX. Some functions moved from uBITX_Ui.
|
|
||||||
3.uBITX Idle time Processing
|
|
||||||
Functions that run at times that do not affect TX, CW, and CAT
|
|
||||||
It is called in 1/10 time unit.
|
|
||||||
-----------------------------------------------------------------------------
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 3 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
|
|
||||||
**************************************************************************/
|
|
||||||
#ifdef UBITX_DISPLAY_LCD1602I
|
|
||||||
|
|
||||||
|
|
||||||
//========================================================================
|
|
||||||
//Begin of LCD Hardware define
|
|
||||||
//The I2C LCD I ordered did not arrive yet.
|
|
||||||
//I referenced the I2C LCD control in the thread at the link below.
|
|
||||||
////https://groups.io/g/BITX20/topic/variation_on_ian_s_kd8cec/16657839?p=,,,20,0,0,0::recentpostdate%2Fsticky,,,20,2,0,16657839
|
|
||||||
//In particular, I referenced the sample code of John (VK2ETA) and K9HZ. Jack, W8TEE, Nick
|
|
||||||
//========================================================================
|
|
||||||
//#include <LiquidCrystal.h>
|
|
||||||
//LiquidCrystal lcd(8,9,10,11,12,13);
|
|
||||||
|
|
||||||
//K9HZ's Code
|
|
||||||
//#include <LiquidCrystal_I2C.h>
|
|
||||||
//LiquidCrystal_I2C lcd(0x3F, 2, 1, 0, 4, 5, 6, 7, 3, POSITIVE); //
|
|
||||||
|
|
||||||
//Jack(W8TEE) Code
|
|
||||||
//LiquidCrystal_I2C lcd(0x3F); // I2C address
|
|
||||||
|
|
||||||
//John(VK2ETA) Code
|
|
||||||
#include <LiquidCrystal_I2C.h>
|
|
||||||
#define I2C_DISPLAY_ADDRESS 0x3F //0x27
|
|
||||||
LiquidCrystal_I2C lcd(I2C_DISPLAY_ADDRESS,16,2); // set the LCD as a 16 chars and 2 line display
|
|
||||||
|
|
||||||
//LiquidCrystal_I2C lcd(0x27,16,2)
|
|
||||||
|
|
||||||
|
|
||||||
//========================================================================
|
|
||||||
//End of LCD Hardware define
|
|
||||||
//========================================================================
|
|
||||||
|
|
||||||
//========================================================================
|
|
||||||
//Begin of Display Base Routines (Init, printLine..)
|
|
||||||
//========================================================================
|
|
||||||
char c[30], b[30];
|
|
||||||
char printBuff[2][17]; //mirrors what is showing on the two lines of the display
|
|
||||||
|
|
||||||
void LCD_Init(void)
|
|
||||||
{
|
|
||||||
lcd.begin(16, 2);
|
|
||||||
initMeter(); //for Meter Display
|
|
||||||
lcd.backlight();
|
|
||||||
}
|
|
||||||
|
|
||||||
// The generic routine to display one line on the LCD
|
|
||||||
void printLine(unsigned char linenmbr, const char *c) {
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
|
|
||||||
|
|
||||||
if (strcmp(c, printBuff[linenmbr])) { // only refresh the display when there was a change
|
|
||||||
lcd.setCursor(0, linenmbr); // place the cursor at the beginning of the selected line
|
|
||||||
lcd.print(c);
|
|
||||||
strcpy(printBuff[linenmbr], c);
|
|
||||||
|
|
||||||
for (byte i = strlen(c); i < 16; i++) { // add white spaces until the end of the 16 characters line is reached
|
|
||||||
lcd.write(' ');
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
void LCD_CreateChar(int aaa, int bbb)
|
|
||||||
{
|
|
||||||
|
|
||||||
}
|
|
||||||
void printLineF(char linenmbr, const __FlashStringHelper *c)
|
|
||||||
{
|
|
||||||
int i;
|
|
||||||
char tmpBuff[17];
|
|
||||||
PGM_P p = reinterpret_cast<PGM_P>(c);
|
|
||||||
|
|
||||||
for (i = 0; i < 17; i++){
|
|
||||||
unsigned char fChar = pgm_read_byte(p++);
|
|
||||||
tmpBuff[i] = fChar;
|
|
||||||
if (fChar == 0)
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
printLine(linenmbr, tmpBuff);
|
|
||||||
}
|
|
||||||
|
|
||||||
#define LCD_MAX_COLUMN 16
|
|
||||||
void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex, char offsetTtype) {
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
|
|
||||||
|
|
||||||
lcd.setCursor(lcdColumn, linenmbr);
|
|
||||||
|
|
||||||
for (byte i = eepromStartIndex; i <= eepromEndIndex; i++)
|
|
||||||
{
|
|
||||||
if (++lcdColumn <= LCD_MAX_COLUMN)
|
|
||||||
lcd.write(EEPROM.read((offsetTtype == 0 ? USER_CALLSIGN_DAT : WSPR_MESSAGE1) + i));
|
|
||||||
else
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (byte i = lcdColumn; i < 16; i++) //Right Padding by Space
|
|
||||||
lcd.write(' ');
|
|
||||||
}
|
|
||||||
|
|
||||||
// short cut to print to the first line
|
|
||||||
void printLine1(const char *c){
|
|
||||||
printLine(1,c);
|
|
||||||
}
|
|
||||||
// short cut to print to the first line
|
|
||||||
void printLine2(const char *c){
|
|
||||||
printLine(0,c);
|
|
||||||
}
|
|
||||||
|
|
||||||
void clearLine2()
|
|
||||||
{
|
|
||||||
printLine2("");
|
|
||||||
line2DisplayStatus = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
// short cut to print to the first line
|
|
||||||
void printLine1Clear(){
|
|
||||||
printLine(1,"");
|
|
||||||
}
|
|
||||||
// short cut to print to the first line
|
|
||||||
void printLine2Clear(){
|
|
||||||
printLine(0, "");
|
|
||||||
}
|
|
||||||
|
|
||||||
void printLine2ClearAndUpdate(){
|
|
||||||
printLine(0, "");
|
|
||||||
line2DisplayStatus = 0;
|
|
||||||
updateDisplay();
|
|
||||||
}
|
|
||||||
//===================================================================================
|
|
||||||
//End of Display Base Routines
|
|
||||||
//===================================================================================
|
|
||||||
|
|
||||||
//===================================================================================
|
|
||||||
//Begin of User Interface Routines
|
|
||||||
//===================================================================================
|
|
||||||
|
|
||||||
// this builds up the top line of the display with frequency and mode
|
|
||||||
void updateDisplay() {
|
|
||||||
// tks Jack Purdum W8TEE
|
|
||||||
// replaced fsprint commmands by str commands for code size reduction
|
|
||||||
// replace code for Frequency numbering error (alignment, point...) by KD8CEC
|
|
||||||
int i;
|
|
||||||
unsigned long tmpFreq = frequency; //
|
|
||||||
|
|
||||||
memset(c, 0, sizeof(c));
|
|
||||||
|
|
||||||
if (inTx){
|
|
||||||
if (isCWAutoMode == 2) {
|
|
||||||
for (i = 0; i < 4; i++)
|
|
||||||
c[3-i] = (i < autoCWSendReservCount ? byteToChar(autoCWSendReserv[i]) : ' ');
|
|
||||||
|
|
||||||
//display Sending Index
|
|
||||||
c[4] = byteToChar(sendingCWTextIndex);
|
|
||||||
c[5] = '=';
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
if (cwTimeout > 0)
|
|
||||||
strcpy(c, " CW:");
|
|
||||||
else
|
|
||||||
strcpy(c, " TX:");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
if (ritOn)
|
|
||||||
strcpy(c, "RIT ");
|
|
||||||
else {
|
|
||||||
if (cwMode == 0)
|
|
||||||
{
|
|
||||||
if (isUSB)
|
|
||||||
strcpy(c, "USB ");
|
|
||||||
else
|
|
||||||
strcpy(c, "LSB ");
|
|
||||||
}
|
|
||||||
else if (cwMode == 1)
|
|
||||||
{
|
|
||||||
strcpy(c, "CWL ");
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
strcpy(c, "CWU ");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
if (vfoActive == VFO_A) // VFO A is active
|
|
||||||
strcat(c, "A:");
|
|
||||||
else
|
|
||||||
strcat(c, "B:");
|
|
||||||
}
|
|
||||||
|
|
||||||
//Fixed by Mitani Massaru (JE4SMQ)
|
|
||||||
if (isShiftDisplayCWFreq == 1)
|
|
||||||
{
|
|
||||||
if (cwMode == 1) //CWL
|
|
||||||
tmpFreq = tmpFreq - sideTone + shiftDisplayAdjustVal;
|
|
||||||
else if (cwMode == 2) //CWU
|
|
||||||
tmpFreq = tmpFreq + sideTone + shiftDisplayAdjustVal;
|
|
||||||
}
|
|
||||||
|
|
||||||
//display frequency
|
|
||||||
for (int i = 15; i >= 6; i--) {
|
|
||||||
if (tmpFreq > 0) {
|
|
||||||
if (i == 12 || i == 8) c[i] = '.';
|
|
||||||
else {
|
|
||||||
c[i] = tmpFreq % 10 + 0x30;
|
|
||||||
tmpFreq /= 10;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
c[i] = ' ';
|
|
||||||
}
|
|
||||||
|
|
||||||
//remarked by KD8CEC
|
|
||||||
//already RX/TX status display, and over index (16 x 2 LCD)
|
|
||||||
//if (inTx)
|
|
||||||
// strcat(c, " TX");
|
|
||||||
printLine(1, c);
|
|
||||||
|
|
||||||
byte diplayVFOLine = 1;
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
diplayVFOLine = 0;
|
|
||||||
|
|
||||||
if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
|
|
||||||
(vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
|
|
||||||
lcd.setCursor(5,diplayVFOLine);
|
|
||||||
lcd.write((uint8_t)0);
|
|
||||||
}
|
|
||||||
else if (isCWAutoMode == 2){
|
|
||||||
lcd.setCursor(5,diplayVFOLine);
|
|
||||||
lcd.write(0x7E);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
lcd.setCursor(5,diplayVFOLine);
|
|
||||||
lcd.write(':');
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
char line2Buffer[16];
|
|
||||||
//KD8CEC 200Hz ST
|
|
||||||
//L14.150 200Hz ST
|
|
||||||
//U14.150 +150khz
|
|
||||||
int freqScrollPosition = 0;
|
|
||||||
//Example Line2 Optinal Display
|
|
||||||
//immediate execution, not call by scheulder
|
|
||||||
void updateLine2Buffer(char displayType)
|
|
||||||
{
|
|
||||||
unsigned long tmpFreq = 0;
|
|
||||||
if (ritOn)
|
|
||||||
{
|
|
||||||
strcpy(line2Buffer, "RitTX:");
|
|
||||||
|
|
||||||
//display frequency
|
|
||||||
tmpFreq = ritTxFrequency;
|
|
||||||
|
|
||||||
//Fixed by Mitani Massaru (JE4SMQ)
|
|
||||||
if (isShiftDisplayCWFreq == 1)
|
|
||||||
{
|
|
||||||
if (cwMode == 1) //CWL
|
|
||||||
tmpFreq = tmpFreq - sideTone + shiftDisplayAdjustVal;
|
|
||||||
else if (cwMode == 2) //CWU
|
|
||||||
tmpFreq = tmpFreq + sideTone + shiftDisplayAdjustVal;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (int i = 15; i >= 6; i--) {
|
|
||||||
if (tmpFreq > 0) {
|
|
||||||
if (i == 12 || i == 8) line2Buffer[i] = '.';
|
|
||||||
else {
|
|
||||||
line2Buffer[i] = tmpFreq % 10 + 0x30;
|
|
||||||
tmpFreq /= 10;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
line2Buffer[i] = ' ';
|
|
||||||
}
|
|
||||||
|
|
||||||
return;
|
|
||||||
} //end of ritOn display
|
|
||||||
|
|
||||||
//======================================================
|
|
||||||
//other VFO display
|
|
||||||
//======================================================
|
|
||||||
if (vfoActive == VFO_B)
|
|
||||||
{
|
|
||||||
tmpFreq = vfoA;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
tmpFreq = vfoB;
|
|
||||||
}
|
|
||||||
|
|
||||||
// EXAMPLE 1 & 2
|
|
||||||
//U14.150.100
|
|
||||||
//display frequency
|
|
||||||
for (int i = 9; i >= 0; i--) {
|
|
||||||
if (tmpFreq > 0) {
|
|
||||||
if (i == 2 || i == 6) line2Buffer[i] = '.';
|
|
||||||
else {
|
|
||||||
line2Buffer[i] = tmpFreq % 10 + 0x30;
|
|
||||||
tmpFreq /= 10;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
line2Buffer[i] = ' ';
|
|
||||||
}
|
|
||||||
|
|
||||||
//EXAMPLE #1
|
|
||||||
if ((displayOption1 & 0x04) == 0x00) //none scroll display
|
|
||||||
line2Buffer[6] = 'M';
|
|
||||||
else
|
|
||||||
{
|
|
||||||
//example #2
|
|
||||||
if (freqScrollPosition++ > 18) //none scroll display time
|
|
||||||
{
|
|
||||||
line2Buffer[6] = 'M';
|
|
||||||
if (freqScrollPosition > 25)
|
|
||||||
freqScrollPosition = -1;
|
|
||||||
}
|
|
||||||
else //scroll frequency
|
|
||||||
{
|
|
||||||
line2Buffer[10] = 'H';
|
|
||||||
line2Buffer[11] = 'z';
|
|
||||||
|
|
||||||
if (freqScrollPosition < 7)
|
|
||||||
{
|
|
||||||
for (int i = 11; i >= 0; i--)
|
|
||||||
if (i - (7 - freqScrollPosition) >= 0)
|
|
||||||
line2Buffer[i] = line2Buffer[i - (7 - freqScrollPosition)];
|
|
||||||
else
|
|
||||||
line2Buffer[i] = ' ';
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
for (int i = 0; i < 11; i++)
|
|
||||||
if (i + (freqScrollPosition - 7) <= 11)
|
|
||||||
line2Buffer[i] = line2Buffer[i + (freqScrollPosition - 7)];
|
|
||||||
else
|
|
||||||
line2Buffer[i] = ' ';
|
|
||||||
}
|
|
||||||
}
|
|
||||||
} //scroll
|
|
||||||
|
|
||||||
line2Buffer[7] = ' ';
|
|
||||||
|
|
||||||
if (isIFShift)
|
|
||||||
{
|
|
||||||
// if (isDirectCall == 1)
|
|
||||||
// for (int i = 0; i < 16; i++)
|
|
||||||
// line2Buffer[i] = ' ';
|
|
||||||
|
|
||||||
//IFShift Offset Value
|
|
||||||
line2Buffer[8] = 'I';
|
|
||||||
line2Buffer[9] = 'F';
|
|
||||||
|
|
||||||
line2Buffer[10] = ifShiftValue >= 0 ? '+' : 0;
|
|
||||||
line2Buffer[11] = 0;
|
|
||||||
line2Buffer[12] = ' ';
|
|
||||||
|
|
||||||
//11, 12, 13, 14, 15
|
|
||||||
memset(b, 0, sizeof(b));
|
|
||||||
ltoa(ifShiftValue, b, DEC);
|
|
||||||
strncat(line2Buffer, b, 5);
|
|
||||||
|
|
||||||
//if (isDirectCall == 1) //if call by encoder (not scheduler), immediate print value
|
|
||||||
printLine2(line2Buffer);
|
|
||||||
} // end of display IF
|
|
||||||
else // step & Key Type display
|
|
||||||
{
|
|
||||||
//if (isDirectCall != 0)
|
|
||||||
// return;
|
|
||||||
|
|
||||||
memset(&line2Buffer[8], ' ', 8);
|
|
||||||
//Step
|
|
||||||
long tmpStep = arTuneStep[tuneStepIndex -1];
|
|
||||||
|
|
||||||
byte isStepKhz = 0;
|
|
||||||
if (tmpStep >= 1000)
|
|
||||||
{
|
|
||||||
isStepKhz = 2;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (int i = 10; i >= 8 - isStepKhz; i--) {
|
|
||||||
if (tmpStep > 0) {
|
|
||||||
line2Buffer[i + isStepKhz] = tmpStep % 10 + 0x30;
|
|
||||||
tmpStep /= 10;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
line2Buffer[i +isStepKhz] = ' ';
|
|
||||||
}
|
|
||||||
|
|
||||||
if (isStepKhz == 0)
|
|
||||||
{
|
|
||||||
line2Buffer[11] = 'H';
|
|
||||||
line2Buffer[12] = 'z';
|
|
||||||
}
|
|
||||||
|
|
||||||
line2Buffer[13] = ' ';
|
|
||||||
|
|
||||||
//Check CW Key cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
|
|
||||||
if (cwKeyType == 0)
|
|
||||||
{
|
|
||||||
line2Buffer[14] = 'S';
|
|
||||||
line2Buffer[15] = 'T';
|
|
||||||
}
|
|
||||||
else if (cwKeyType == 1)
|
|
||||||
{
|
|
||||||
line2Buffer[14] = 'I';
|
|
||||||
line2Buffer[15] = 'A';
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
line2Buffer[14] = 'I';
|
|
||||||
line2Buffer[15] = 'B';
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
//meterType : 0 = S.Meter, 1 : P.Meter
|
|
||||||
void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
|
|
||||||
{
|
|
||||||
if (meterType == 0 || meterType == 1 || meterType == 2)
|
|
||||||
{
|
|
||||||
drawMeter(meterValue); //call original source code
|
|
||||||
int lineNumber = 0;
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
lineNumber = 1;
|
|
||||||
|
|
||||||
lcd.setCursor(drawPosition, lineNumber);
|
|
||||||
|
|
||||||
for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
|
|
||||||
lcd.write(lcdMeter[i]);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
byte testValue = 0;
|
|
||||||
char checkCount = 0;
|
|
||||||
void idle_process()
|
|
||||||
{
|
|
||||||
//space for user graphic display
|
|
||||||
if (menuOn == 0)
|
|
||||||
{
|
|
||||||
if ((displayOption1 & 0x10) == 0x10) //always empty topline
|
|
||||||
return;
|
|
||||||
|
|
||||||
//if line2DisplayStatus == 0 <-- this condition is clear Line, you can display any message
|
|
||||||
if (line2DisplayStatus == 0 || (((displayOption1 & 0x04) == 0x04) && line2DisplayStatus == 2)) {
|
|
||||||
if (checkCount++ > 1)
|
|
||||||
{
|
|
||||||
updateLine2Buffer(0); //call by scheduler
|
|
||||||
printLine2(line2Buffer);
|
|
||||||
line2DisplayStatus = 2;
|
|
||||||
checkCount = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
//EX for Meters
|
|
||||||
/*
|
|
||||||
DisplayMeter(0, testValue++, 7);
|
|
||||||
if (testValue > 30)
|
|
||||||
testValue = 0;
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
void Display_AutoKeyTextIndex(byte textIndex)
|
|
||||||
{
|
|
||||||
byte diplayAutoCWLine = 0;
|
|
||||||
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
diplayAutoCWLine = 1;
|
|
||||||
lcd.setCursor(0, diplayAutoCWLine);
|
|
||||||
lcd.write(byteToChar(textIndex));
|
|
||||||
lcd.write(':');
|
|
||||||
}
|
|
||||||
|
|
||||||
void DisplayCallsign(byte callSignLength)
|
|
||||||
{
|
|
||||||
printLineFromEEPRom(0, 0, 0, userCallsignLength -1, 0); //eeprom to lcd use offset (USER_CALLSIGN_DAT)
|
|
||||||
//delay(500);
|
|
||||||
}
|
|
||||||
|
|
||||||
void DisplayVersionInfo(const __FlashStringHelper * fwVersionInfo)
|
|
||||||
{
|
|
||||||
printLineF(1, fwVersionInfo);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -1,687 +0,0 @@
|
|||||||
/*************************************************************************
|
|
||||||
KD8CEC's uBITX Display Routine for LCD1602 Parrel
|
|
||||||
1.This is the display code for the default LCD mounted in uBITX.
|
|
||||||
2.Display related functions of uBITX. Some functions moved from uBITX_Ui.
|
|
||||||
3.uBITX Idle time Processing
|
|
||||||
Functions that run at times that do not affect TX, CW, and CAT
|
|
||||||
It is called in 1/10 time unit.
|
|
||||||
-----------------------------------------------------------------------------
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 3 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
|
|
||||||
**************************************************************************/
|
|
||||||
#ifdef UBITX_DISPLAY_LCD1602I_CUST
|
|
||||||
#include <Wire.h>
|
|
||||||
|
|
||||||
//========================================================================
|
|
||||||
//Begin of TinyLCD Library by KD8CEC
|
|
||||||
//========================================================================
|
|
||||||
/*************************************************************************
|
|
||||||
LCD1602_TINY Library for 16 x 2 LCD
|
|
||||||
Referecnce Source : LiquidCrystal.cpp
|
|
||||||
KD8CEC
|
|
||||||
|
|
||||||
This source code is modified version for small program memory
|
|
||||||
from Arduino LiquidCrystal Library
|
|
||||||
|
|
||||||
I wrote this code myself, so there is no license restriction.
|
|
||||||
So this code allows anyone to write with confidence.
|
|
||||||
But keep it as long as the original author of the code.
|
|
||||||
Ian KD8CEC
|
|
||||||
**************************************************************************/
|
|
||||||
#define I2C_DISPLAY_ADDRESS 0x3F //0x27
|
|
||||||
|
|
||||||
#define En B00000100 // Enable bit
|
|
||||||
#define Rw B00000010 // Read/Write bit
|
|
||||||
#define Rs B00000001 // Register select bit
|
|
||||||
|
|
||||||
#define LCD_Command(x) (LCD_Send(x, 0))
|
|
||||||
#define LCD_Write(x) (LCD_Send(x, Rs))
|
|
||||||
|
|
||||||
//Define connected PIN
|
|
||||||
//#define LCD_PIN_RS 8
|
|
||||||
//#define LCD_PIN_EN 9
|
|
||||||
//uint8_t LCD_PIN_DAT[4] = {10, 11, 12, 13};
|
|
||||||
|
|
||||||
uint8_t _Addr;
|
|
||||||
uint8_t _displayfunction;
|
|
||||||
uint8_t _displaycontrol;
|
|
||||||
uint8_t _displaymode;
|
|
||||||
uint8_t _numlines;
|
|
||||||
uint8_t _cols;
|
|
||||||
uint8_t _rows;
|
|
||||||
uint8_t _backlightval;
|
|
||||||
|
|
||||||
// commands
|
|
||||||
#define LCD_CLEARDISPLAY 0x01
|
|
||||||
#define LCD_RETURNHOME 0x02
|
|
||||||
#define LCD_ENTRYMODESET 0x04
|
|
||||||
#define LCD_DISPLAYCONTROL 0x08
|
|
||||||
#define LCD_CURSORSHIFT 0x10
|
|
||||||
#define LCD_FUNCTIONSET 0x20
|
|
||||||
#define LCD_SETCGRAMADDR 0x40
|
|
||||||
#define LCD_SETDDRAMADDR 0x80
|
|
||||||
|
|
||||||
// flags for display entry mode
|
|
||||||
#define LCD_ENTRYRIGHT 0x00
|
|
||||||
#define LCD_ENTRYLEFT 0x02
|
|
||||||
#define LCD_ENTRYSHIFTINCREMENT 0x01
|
|
||||||
#define LCD_ENTRYSHIFTDECREMENT 0x00
|
|
||||||
|
|
||||||
// flags for display on/off control
|
|
||||||
#define LCD_DISPLAYON 0x04
|
|
||||||
#define LCD_DISPLAYOFF 0x00
|
|
||||||
#define LCD_CURSORON 0x02
|
|
||||||
#define LCD_CURSOROFF 0x00
|
|
||||||
#define LCD_BLINKON 0x01
|
|
||||||
#define LCD_BLINKOFF 0x00
|
|
||||||
|
|
||||||
// flags for display/cursor shift
|
|
||||||
#define LCD_DISPLAYMOVE 0x08
|
|
||||||
#define LCD_CURSORMOVE 0x00
|
|
||||||
#define LCD_MOVERIGHT 0x04
|
|
||||||
#define LCD_MOVELEFT 0x00
|
|
||||||
|
|
||||||
// flags for function set
|
|
||||||
#define LCD_8BITMODE 0x10
|
|
||||||
#define LCD_4BITMODE 0x00
|
|
||||||
#define LCD_2LINE 0x08
|
|
||||||
#define LCD_1LINE 0x00
|
|
||||||
#define LCD_5x10DOTS 0x04
|
|
||||||
#define LCD_5x8DOTS 0x00
|
|
||||||
|
|
||||||
// flags for backlight control
|
|
||||||
#define LCD_BACKLIGHT 0x08
|
|
||||||
#define LCD_NOBACKLIGHT 0x00
|
|
||||||
|
|
||||||
#define printIIC(args) Wire.write(args)
|
|
||||||
|
|
||||||
void expanderWrite(uint8_t _data)
|
|
||||||
{
|
|
||||||
Wire.beginTransmission(_Addr);
|
|
||||||
printIIC((int)(_data) | _backlightval);
|
|
||||||
Wire.endTransmission();
|
|
||||||
}
|
|
||||||
|
|
||||||
void pulseEnable(uint8_t _data){
|
|
||||||
expanderWrite(_data | En); // En high
|
|
||||||
delayMicroseconds(1); // enable pulse must be >450ns
|
|
||||||
|
|
||||||
expanderWrite(_data & ~En); // En low
|
|
||||||
delayMicroseconds(50); // commands need > 37us to settle
|
|
||||||
}
|
|
||||||
|
|
||||||
void write4bits(uint8_t value)
|
|
||||||
{
|
|
||||||
expanderWrite(value);
|
|
||||||
pulseEnable(value);
|
|
||||||
}
|
|
||||||
|
|
||||||
void LCD_Send(uint8_t value, uint8_t mode)
|
|
||||||
{
|
|
||||||
uint8_t highnib=value&0xf0;
|
|
||||||
uint8_t lownib=(value<<4)&0xf0;
|
|
||||||
write4bits((highnib)|mode);
|
|
||||||
write4bits((lownib)|mode);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
// Turn the (optional) backlight off/on
|
|
||||||
void noBacklight(void) {
|
|
||||||
_backlightval=LCD_NOBACKLIGHT;
|
|
||||||
expanderWrite(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
void backlight(void) {
|
|
||||||
_backlightval=LCD_BACKLIGHT;
|
|
||||||
expanderWrite(0);
|
|
||||||
}
|
|
||||||
|
|
||||||
void LCD1602_Init()
|
|
||||||
{
|
|
||||||
//I2C Init
|
|
||||||
_Addr = I2C_DISPLAY_ADDRESS;
|
|
||||||
_cols = 16;
|
|
||||||
_rows = 2;
|
|
||||||
_backlightval = LCD_NOBACKLIGHT;
|
|
||||||
Wire.begin();
|
|
||||||
|
|
||||||
delay(50);
|
|
||||||
|
|
||||||
// Now we pull both RS and R/W low to begin commands
|
|
||||||
expanderWrite(_backlightval); // reset expanderand turn backlight off (Bit 8 =1)
|
|
||||||
delay(1000);
|
|
||||||
//put the LCD into 4 bit mode
|
|
||||||
// this is according to the hitachi HD44780 datasheet
|
|
||||||
// figure 24, pg 46
|
|
||||||
|
|
||||||
// we start in 8bit mode, try to set 4 bit mode
|
|
||||||
write4bits(0x03 << 4);
|
|
||||||
delayMicroseconds(4500); // wait min 4.1ms
|
|
||||||
|
|
||||||
// second try
|
|
||||||
write4bits(0x03 << 4);
|
|
||||||
delayMicroseconds(4500); // wait min 4.1ms
|
|
||||||
|
|
||||||
// third go!
|
|
||||||
write4bits(0x03 << 4);
|
|
||||||
delayMicroseconds(150);
|
|
||||||
|
|
||||||
// finally, set to 4-bit interface
|
|
||||||
write4bits(0x02 << 4);
|
|
||||||
|
|
||||||
// finally, set # lines, font size, etc.
|
|
||||||
LCD_Command(LCD_FUNCTIONSET | LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS | LCD_2LINE);
|
|
||||||
|
|
||||||
// turn the display on with no cursor or blinking default
|
|
||||||
LCD_Command(LCD_DISPLAYCONTROL | LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF);
|
|
||||||
|
|
||||||
// clear it off
|
|
||||||
LCD_Command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
|
|
||||||
//delayMicroseconds(2000); // this command takes a long time!
|
|
||||||
delayMicroseconds(1000); // this command takes a long time!
|
|
||||||
|
|
||||||
LCD_Command(LCD_ENTRYMODESET | LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT);
|
|
||||||
|
|
||||||
backlight();
|
|
||||||
}
|
|
||||||
|
|
||||||
void LCD_Print(const char *c)
|
|
||||||
{
|
|
||||||
for (uint8_t i = 0; i < strlen(c); i++)
|
|
||||||
{
|
|
||||||
if (*(c + i) == 0x00) return;
|
|
||||||
LCD_Write(*(c + i));
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
void LCD_SetCursor(uint8_t col, uint8_t row)
|
|
||||||
{
|
|
||||||
LCD_Command(LCD_SETDDRAMADDR | (col + row * 0x40)); //0 : 0x00, 1 : 0x40, only for 16 x 2 lcd
|
|
||||||
}
|
|
||||||
|
|
||||||
void LCD_CreateChar(uint8_t location, uint8_t charmap[])
|
|
||||||
{
|
|
||||||
location &= 0x7; // we only have 8 locations 0-7
|
|
||||||
LCD_Command(LCD_SETCGRAMADDR | (location << 3));
|
|
||||||
for (int i=0; i<8; i++)
|
|
||||||
LCD_Write(charmap[i]);
|
|
||||||
}
|
|
||||||
//========================================================================
|
|
||||||
//End of TinyLCD Library by KD8CEC
|
|
||||||
//========================================================================
|
|
||||||
|
|
||||||
/*
|
|
||||||
#include <LiquidCrystal.h>
|
|
||||||
LiquidCrystal lcd(8,9,10,11,12,13);
|
|
||||||
*/
|
|
||||||
|
|
||||||
|
|
||||||
//========================================================================
|
|
||||||
//Begin of Display Base Routines (Init, printLine..)
|
|
||||||
//========================================================================
|
|
||||||
char c[30], b[30];
|
|
||||||
char printBuff[2][17]; //mirrors what is showing on the two lines of the display
|
|
||||||
|
|
||||||
void LCD_Init(void)
|
|
||||||
{
|
|
||||||
LCD1602_Init();
|
|
||||||
initMeter(); //for Meter Display
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
// The generic routine to display one line on the LCD
|
|
||||||
void printLine(unsigned char linenmbr, const char *c) {
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
|
|
||||||
if (strcmp(c, printBuff[linenmbr])) { // only refresh the display when there was a change
|
|
||||||
LCD_SetCursor(0, linenmbr); // place the cursor at the beginning of the selected line
|
|
||||||
LCD_Print(c);
|
|
||||||
strcpy(printBuff[linenmbr], c);
|
|
||||||
|
|
||||||
for (byte i = strlen(c); i < 16; i++) { // add white spaces until the end of the 16 characters line is reached
|
|
||||||
LCD_Write(' ');
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
void printLineF(char linenmbr, const __FlashStringHelper *c)
|
|
||||||
{
|
|
||||||
int i;
|
|
||||||
char tmpBuff[17];
|
|
||||||
PGM_P p = reinterpret_cast<PGM_P>(c);
|
|
||||||
|
|
||||||
for (i = 0; i < 17; i++){
|
|
||||||
unsigned char fChar = pgm_read_byte(p++);
|
|
||||||
tmpBuff[i] = fChar;
|
|
||||||
if (fChar == 0)
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
printLine(linenmbr, tmpBuff);
|
|
||||||
}
|
|
||||||
|
|
||||||
#define LCD_MAX_COLUMN 16
|
|
||||||
void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex, char offsetTtype) {
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
|
|
||||||
|
|
||||||
LCD_SetCursor(lcdColumn, linenmbr);
|
|
||||||
|
|
||||||
for (byte i = eepromStartIndex; i <= eepromEndIndex; i++)
|
|
||||||
{
|
|
||||||
if (++lcdColumn <= LCD_MAX_COLUMN)
|
|
||||||
LCD_Write(EEPROM.read((offsetTtype == 0 ? USER_CALLSIGN_DAT : WSPR_MESSAGE1) + i));
|
|
||||||
else
|
|
||||||
break;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (byte i = lcdColumn; i < 16; i++) //Right Padding by Space
|
|
||||||
LCD_Write(' ');
|
|
||||||
}
|
|
||||||
|
|
||||||
// short cut to print to the first line
|
|
||||||
void printLine1(const char *c)
|
|
||||||
{
|
|
||||||
printLine(1,c);
|
|
||||||
}
|
|
||||||
// short cut to print to the first line
|
|
||||||
void printLine2(const char *c)
|
|
||||||
{
|
|
||||||
printLine(0,c);
|
|
||||||
}
|
|
||||||
|
|
||||||
void clearLine2()
|
|
||||||
{
|
|
||||||
printLine2("");
|
|
||||||
line2DisplayStatus = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
// short cut to print to the first line
|
|
||||||
void printLine1Clear(){
|
|
||||||
printLine(1,"");
|
|
||||||
}
|
|
||||||
// short cut to print to the first line
|
|
||||||
void printLine2Clear(){
|
|
||||||
printLine(0, "");
|
|
||||||
}
|
|
||||||
|
|
||||||
void printLine2ClearAndUpdate(){
|
|
||||||
printLine(0, "");
|
|
||||||
line2DisplayStatus = 0;
|
|
||||||
updateDisplay();
|
|
||||||
}
|
|
||||||
|
|
||||||
//==================================================================================
|
|
||||||
//End of Display Base Routines
|
|
||||||
//==================================================================================
|
|
||||||
|
|
||||||
|
|
||||||
//==================================================================================
|
|
||||||
//Begin of User Interface Routines
|
|
||||||
//==================================================================================
|
|
||||||
|
|
||||||
//Main Display
|
|
||||||
// this builds up the top line of the display with frequency and mode
|
|
||||||
void updateDisplay() {
|
|
||||||
// tks Jack Purdum W8TEE
|
|
||||||
// replaced fsprint commmands by str commands for code size reduction
|
|
||||||
// replace code for Frequency numbering error (alignment, point...) by KD8CEC
|
|
||||||
int i;
|
|
||||||
unsigned long tmpFreq = frequency; //
|
|
||||||
|
|
||||||
memset(c, 0, sizeof(c));
|
|
||||||
|
|
||||||
if (inTx){
|
|
||||||
if (isCWAutoMode == 2) {
|
|
||||||
for (i = 0; i < 4; i++)
|
|
||||||
c[3-i] = (i < autoCWSendReservCount ? byteToChar(autoCWSendReserv[i]) : ' ');
|
|
||||||
|
|
||||||
//display Sending Index
|
|
||||||
c[4] = byteToChar(sendingCWTextIndex);
|
|
||||||
c[5] = '=';
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
if (cwTimeout > 0)
|
|
||||||
strcpy(c, " CW:");
|
|
||||||
else
|
|
||||||
strcpy(c, " TX:");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else {
|
|
||||||
if (ritOn)
|
|
||||||
strcpy(c, "RIT ");
|
|
||||||
else {
|
|
||||||
if (cwMode == 0)
|
|
||||||
{
|
|
||||||
if (isUSB)
|
|
||||||
strcpy(c, "USB ");
|
|
||||||
else
|
|
||||||
strcpy(c, "LSB ");
|
|
||||||
}
|
|
||||||
else if (cwMode == 1)
|
|
||||||
{
|
|
||||||
strcpy(c, "CWL ");
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
strcpy(c, "CWU ");
|
|
||||||
}
|
|
||||||
}
|
|
||||||
if (vfoActive == VFO_A) // VFO A is active
|
|
||||||
strcat(c, "A:");
|
|
||||||
else
|
|
||||||
strcat(c, "B:");
|
|
||||||
}
|
|
||||||
|
|
||||||
//Fixed by Mitani Massaru (JE4SMQ)
|
|
||||||
if (isShiftDisplayCWFreq == 1)
|
|
||||||
{
|
|
||||||
if (cwMode == 1) //CWL
|
|
||||||
tmpFreq = tmpFreq - sideTone + shiftDisplayAdjustVal;
|
|
||||||
else if (cwMode == 2) //CWU
|
|
||||||
tmpFreq = tmpFreq + sideTone + shiftDisplayAdjustVal;
|
|
||||||
}
|
|
||||||
|
|
||||||
//display frequency
|
|
||||||
for (int i = 15; i >= 6; i--) {
|
|
||||||
if (tmpFreq > 0) {
|
|
||||||
if (i == 12 || i == 8) c[i] = '.';
|
|
||||||
else {
|
|
||||||
c[i] = tmpFreq % 10 + 0x30;
|
|
||||||
tmpFreq /= 10;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
c[i] = ' ';
|
|
||||||
}
|
|
||||||
|
|
||||||
//remarked by KD8CEC
|
|
||||||
//already RX/TX status display, and over index (16 x 2 LCD)
|
|
||||||
//if (inTx)
|
|
||||||
// strcat(c, " TX");
|
|
||||||
printLine(1, c);
|
|
||||||
|
|
||||||
byte diplayVFOLine = 1;
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
diplayVFOLine = 0;
|
|
||||||
|
|
||||||
if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
|
|
||||||
(vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
|
|
||||||
LCD_SetCursor(5,diplayVFOLine);
|
|
||||||
LCD_Write((uint8_t)0);
|
|
||||||
}
|
|
||||||
else if (isCWAutoMode == 2){
|
|
||||||
LCD_SetCursor(5,diplayVFOLine);
|
|
||||||
LCD_Write(0x7E);
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
LCD_SetCursor(5,diplayVFOLine);
|
|
||||||
LCD_Write(':');
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
char line2Buffer[16];
|
|
||||||
//KD8CEC 200Hz ST
|
|
||||||
//L14.150 200Hz ST
|
|
||||||
//U14.150 +150khz
|
|
||||||
int freqScrollPosition = 0;
|
|
||||||
|
|
||||||
//Example Line2 Optinal Display
|
|
||||||
//immediate execution, not call by scheulder
|
|
||||||
//warning : unused parameter 'displayType' <-- ignore, this is reserve
|
|
||||||
void updateLine2Buffer(char displayType)
|
|
||||||
{
|
|
||||||
unsigned long tmpFreq = 0;
|
|
||||||
if (ritOn)
|
|
||||||
{
|
|
||||||
strcpy(line2Buffer, "RitTX:");
|
|
||||||
|
|
||||||
//display frequency
|
|
||||||
tmpFreq = ritTxFrequency;
|
|
||||||
|
|
||||||
//Fixed by Mitani Massaru (JE4SMQ)
|
|
||||||
if (isShiftDisplayCWFreq == 1)
|
|
||||||
{
|
|
||||||
if (cwMode == 1) //CWL
|
|
||||||
tmpFreq = tmpFreq - sideTone + shiftDisplayAdjustVal;
|
|
||||||
else if (cwMode == 2) //CWU
|
|
||||||
tmpFreq = tmpFreq + sideTone + shiftDisplayAdjustVal;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (int i = 15; i >= 6; i--) {
|
|
||||||
if (tmpFreq > 0) {
|
|
||||||
if (i == 12 || i == 8) line2Buffer[i] = '.';
|
|
||||||
else {
|
|
||||||
line2Buffer[i] = tmpFreq % 10 + 0x30;
|
|
||||||
tmpFreq /= 10;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
line2Buffer[i] = ' ';
|
|
||||||
}
|
|
||||||
|
|
||||||
return;
|
|
||||||
} //end of ritOn display
|
|
||||||
|
|
||||||
//other VFO display
|
|
||||||
if (vfoActive == VFO_B)
|
|
||||||
{
|
|
||||||
tmpFreq = vfoA;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
tmpFreq = vfoB;
|
|
||||||
}
|
|
||||||
|
|
||||||
// EXAMPLE 1 & 2
|
|
||||||
//U14.150.100
|
|
||||||
//display frequency
|
|
||||||
for (int i = 9; i >= 0; i--) {
|
|
||||||
if (tmpFreq > 0) {
|
|
||||||
if (i == 2 || i == 6) line2Buffer[i] = '.';
|
|
||||||
else {
|
|
||||||
line2Buffer[i] = tmpFreq % 10 + 0x30;
|
|
||||||
tmpFreq /= 10;
|
|
||||||
}
|
|
||||||
}
|
|
||||||
else
|
|
||||||
line2Buffer[i] = ' ';
|
|
||||||
}
|
|
||||||
|
|
||||||
//EXAMPLE #1
|
|
||||||
if ((displayOption1 & 0x04) == 0x00) //none scroll display
|
|
||||||
line2Buffer[6] = 'M';
|
|
||||||
else
|
|
||||||
{
|
|
||||||
//example #2
|
|
||||||
if (freqScrollPosition++ > 18) //none scroll display time
|
|
||||||
{
|
|
||||||
line2Buffer[6] = 'M';
|
|
||||||
if (freqScrollPosition > 25)
|
|
||||||
freqScrollPosition = -1;
|
|
||||||
}
|
|
||||||
else //scroll frequency
|
|
||||||
{
|
|
||||||
line2Buffer[10] = 'H';
|
|
||||||
line2Buffer[11] = 'z';
|
|
||||||
|
|
||||||
if (freqScrollPosition < 7)
|
|
||||||
{
|
|
||||||
for (int i = 11; i >= 0; i--)
|
|
||||||
if (i - (7 - freqScrollPosition) >= 0)
|
|
||||||
line2Buffer[i] = line2Buffer[i - (7 - freqScrollPosition)];
|
|
||||||
else
|
|
||||||
line2Buffer[i] = ' ';
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
for (int i = 0; i < 11; i++)
|
|
||||||
if (i + (freqScrollPosition - 7) <= 11)
|
|
||||||
line2Buffer[i] = line2Buffer[i + (freqScrollPosition - 7)];
|
|
||||||
else
|
|
||||||
line2Buffer[i] = ' ';
|
|
||||||
}
|
|
||||||
}
|
|
||||||
} //scroll
|
|
||||||
|
|
||||||
line2Buffer[7] = ' ';
|
|
||||||
|
|
||||||
if (isIFShift)
|
|
||||||
{
|
|
||||||
// if (isDirectCall == 1)
|
|
||||||
// for (int i = 0; i < 16; i++)
|
|
||||||
// line2Buffer[i] = ' ';
|
|
||||||
|
|
||||||
//IFShift Offset Value
|
|
||||||
line2Buffer[8] = 'I';
|
|
||||||
line2Buffer[9] = 'F';
|
|
||||||
|
|
||||||
line2Buffer[10] = ifShiftValue >= 0 ? '+' : 0;
|
|
||||||
line2Buffer[11] = 0;
|
|
||||||
line2Buffer[12] = ' ';
|
|
||||||
|
|
||||||
//11, 12, 13, 14, 15
|
|
||||||
memset(b, 0, sizeof(b));
|
|
||||||
ltoa(ifShiftValue, b, DEC);
|
|
||||||
strncat(line2Buffer, b, 5);
|
|
||||||
|
|
||||||
//if (isDirectCall == 1) //if call by encoder (not scheduler), immediate print value
|
|
||||||
printLine2(line2Buffer);
|
|
||||||
} // end of display IF
|
|
||||||
else // step & Key Type display
|
|
||||||
{
|
|
||||||
//if (isDirectCall != 0)
|
|
||||||
// return;
|
|
||||||
|
|
||||||
memset(&line2Buffer[8], ' ', 8);
|
|
||||||
//Step
|
|
||||||
long tmpStep = arTuneStep[tuneStepIndex -1];
|
|
||||||
|
|
||||||
byte isStepKhz = 0;
|
|
||||||
if (tmpStep >= 1000)
|
|
||||||
{
|
|
||||||
isStepKhz = 2;
|
|
||||||
}
|
|
||||||
|
|
||||||
for (int i = 10; i >= 8 - isStepKhz; i--) {
|
|
||||||
if (tmpStep > 0) {
|
|
||||||
line2Buffer[i + isStepKhz] = tmpStep % 10 + 0x30;
|
|
||||||
tmpStep /= 10;
|
|
||||||
}
|
|
||||||
else
|
|
||||||
line2Buffer[i +isStepKhz] = ' ';
|
|
||||||
}
|
|
||||||
|
|
||||||
if (isStepKhz == 0)
|
|
||||||
{
|
|
||||||
line2Buffer[11] = 'H';
|
|
||||||
line2Buffer[12] = 'z';
|
|
||||||
}
|
|
||||||
|
|
||||||
line2Buffer[13] = ' ';
|
|
||||||
|
|
||||||
//Check CW Key cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
|
|
||||||
if (cwKeyType == 0)
|
|
||||||
{
|
|
||||||
line2Buffer[14] = 'S';
|
|
||||||
line2Buffer[15] = 'T';
|
|
||||||
}
|
|
||||||
else if (cwKeyType == 1)
|
|
||||||
{
|
|
||||||
line2Buffer[14] = 'I';
|
|
||||||
line2Buffer[15] = 'A';
|
|
||||||
}
|
|
||||||
else
|
|
||||||
{
|
|
||||||
line2Buffer[14] = 'I';
|
|
||||||
line2Buffer[15] = 'B';
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
//meterType : 0 = S.Meter, 1 : P.Meter
|
|
||||||
void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
|
|
||||||
{
|
|
||||||
if (meterType == 0 || meterType == 1 || meterType == 2)
|
|
||||||
{
|
|
||||||
drawMeter(meterValue); //call original source code
|
|
||||||
int lineNumber = 0;
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
lineNumber = 1;
|
|
||||||
|
|
||||||
LCD_SetCursor(drawPosition, lineNumber);
|
|
||||||
|
|
||||||
for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
|
|
||||||
LCD_Write(lcdMeter[i]);
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
byte testValue = 0;
|
|
||||||
char checkCount = 0;
|
|
||||||
void idle_process()
|
|
||||||
{
|
|
||||||
//space for user graphic display
|
|
||||||
if (menuOn == 0)
|
|
||||||
{
|
|
||||||
if ((displayOption1 & 0x10) == 0x10) //always empty topline
|
|
||||||
return;
|
|
||||||
|
|
||||||
//if line2DisplayStatus == 0 <-- this condition is clear Line, you can display any message
|
|
||||||
if (line2DisplayStatus == 0 || (((displayOption1 & 0x04) == 0x04) && line2DisplayStatus == 2)) {
|
|
||||||
if (checkCount++ > 1)
|
|
||||||
{
|
|
||||||
updateLine2Buffer(0); //call by scheduler
|
|
||||||
printLine2(line2Buffer);
|
|
||||||
line2DisplayStatus = 2;
|
|
||||||
checkCount = 0;
|
|
||||||
}
|
|
||||||
|
|
||||||
//EX for Meters
|
|
||||||
/*
|
|
||||||
DisplayMeter(0, testValue++, 7);
|
|
||||||
if (testValue > 30)
|
|
||||||
testValue = 0;
|
|
||||||
*/
|
|
||||||
}
|
|
||||||
}
|
|
||||||
}
|
|
||||||
|
|
||||||
//AutoKey LCD Display Routine
|
|
||||||
void Display_AutoKeyTextIndex(byte textIndex)
|
|
||||||
{
|
|
||||||
byte diplayAutoCWLine = 0;
|
|
||||||
|
|
||||||
if ((displayOption1 & 0x01) == 0x01)
|
|
||||||
diplayAutoCWLine = 1;
|
|
||||||
LCD_SetCursor(0, diplayAutoCWLine);
|
|
||||||
LCD_Write(byteToChar(textIndex));
|
|
||||||
LCD_Write(':');
|
|
||||||
}
|
|
||||||
|
|
||||||
void DisplayCallsign(byte callSignLength)
|
|
||||||
{
|
|
||||||
printLineFromEEPRom(0, 0, 0, userCallsignLength -1, 0); //eeprom to lcd use offset (USER_CALLSIGN_DAT)
|
|
||||||
//delay(500);
|
|
||||||
}
|
|
||||||
|
|
||||||
void DisplayVersionInfo(const __FlashStringHelper * fwVersionInfo)
|
|
||||||
{
|
|
||||||
printLineF(1, fwVersionInfo);
|
|
||||||
}
|
|
||||||
|
|
||||||
|
|
||||||
#endif
|
|
||||||
@ -20,33 +20,8 @@
|
|||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||||
|
|
||||||
**************************************************************************/
|
**************************************************************************/
|
||||||
#ifdef UBITX_DISPLAY_LCD2004P
|
|
||||||
|
|
||||||
//========================================================================
|
//Common Defines *********************************************************
|
||||||
//Begin of TinyLCD Library by KD8CEC
|
|
||||||
//========================================================================
|
|
||||||
/*************************************************************************
|
|
||||||
LCD2004TINY Library for 20 x 4 LCD
|
|
||||||
Referecnce Source : LiquidCrystal.cpp
|
|
||||||
KD8CEC
|
|
||||||
|
|
||||||
This source code is modified version for small program memory
|
|
||||||
from Arduino LiquidCrystal Library
|
|
||||||
|
|
||||||
I wrote this code myself, so there is no license restriction.
|
|
||||||
So this code allows anyone to write with confidence.
|
|
||||||
But keep it as long as the original author of the code.
|
|
||||||
DE Ian KD8CEC
|
|
||||||
**************************************************************************/
|
|
||||||
#define LCD_Command(x) (LCD_Send(x, LOW))
|
|
||||||
#define LCD_Write(x) (LCD_Send(x, HIGH))
|
|
||||||
|
|
||||||
//Define connected PIN
|
|
||||||
#define LCD_PIN_RS 8
|
|
||||||
#define LCD_PIN_EN 9
|
|
||||||
uint8_t LCD_PIN_DAT[4] = {10, 11, 12, 13};
|
|
||||||
|
|
||||||
// commands
|
|
||||||
#define LCD_CLEARDISPLAY 0x01
|
#define LCD_CLEARDISPLAY 0x01
|
||||||
#define LCD_RETURNHOME 0x02
|
#define LCD_RETURNHOME 0x02
|
||||||
#define LCD_ENTRYMODESET 0x04
|
#define LCD_ENTRYMODESET 0x04
|
||||||
@ -84,6 +59,38 @@ uint8_t LCD_PIN_DAT[4] = {10, 11, 12, 13};
|
|||||||
#define LCD_5x10DOTS 0x04
|
#define LCD_5x10DOTS 0x04
|
||||||
#define LCD_5x8DOTS 0x00
|
#define LCD_5x8DOTS 0x00
|
||||||
|
|
||||||
|
// flags for backlight control
|
||||||
|
#define LCD_BACKLIGHT 0x08
|
||||||
|
#define LCD_NOBACKLIGHT 0x00
|
||||||
|
|
||||||
|
//========================================================================
|
||||||
|
//Begin of TinyLCD Library by KD8CEC
|
||||||
|
//========================================================================
|
||||||
|
|
||||||
|
#ifdef UBITX_DISPLAY_LCD2004P
|
||||||
|
/*************************************************************************
|
||||||
|
LCD2004TINY Library for 20 x 4 LCD
|
||||||
|
Referecnce Source : LiquidCrystal.cpp
|
||||||
|
KD8CEC
|
||||||
|
|
||||||
|
This source code is modified version for small program memory
|
||||||
|
from Arduino LiquidCrystal Library
|
||||||
|
|
||||||
|
I wrote this code myself, so there is no license restriction.
|
||||||
|
So this code allows anyone to write with confidence.
|
||||||
|
But keep it as long as the original author of the code.
|
||||||
|
DE Ian KD8CEC
|
||||||
|
**************************************************************************/
|
||||||
|
#define LCD_Command(x) (LCD_Send(x, LOW))
|
||||||
|
#define LCD_Write(x) (LCD_Send(x, HIGH))
|
||||||
|
|
||||||
|
#define UBITX_DISPLAY_LCD2004_BASE
|
||||||
|
|
||||||
|
//Define connected PIN
|
||||||
|
#define LCD_PIN_RS 8
|
||||||
|
#define LCD_PIN_EN 9
|
||||||
|
uint8_t LCD_PIN_DAT[4] = {10, 11, 12, 13};
|
||||||
|
|
||||||
void write4bits(uint8_t value)
|
void write4bits(uint8_t value)
|
||||||
{
|
{
|
||||||
for (int i = 0; i < 4; i++)
|
for (int i = 0; i < 4; i++)
|
||||||
@ -144,6 +151,152 @@ void LCD2004_Init()
|
|||||||
|
|
||||||
LCD_Command(LCD_ENTRYMODESET | LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT);
|
LCD_Command(LCD_ENTRYMODESET | LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT);
|
||||||
}
|
}
|
||||||
|
#endif
|
||||||
|
//========================================================================
|
||||||
|
//End of TinyLCD Library by KD8CEC
|
||||||
|
//========================================================================
|
||||||
|
|
||||||
|
|
||||||
|
|
||||||
|
//========================================================================
|
||||||
|
//Begin of I2CTinyLCD Library by KD8CEC
|
||||||
|
//========================================================================
|
||||||
|
#ifdef UBITX_DISPLAY_LCD2004I
|
||||||
|
|
||||||
|
#include <Wire.h>
|
||||||
|
/*************************************************************************
|
||||||
|
I2C Tiny LCD Library
|
||||||
|
Referecnce Source : LiquidCrystal_I2C.cpp // Based on the work by DFRobot
|
||||||
|
KD8CEC
|
||||||
|
|
||||||
|
This source code is modified version for small program memory
|
||||||
|
from Arduino LiquidCrystal_I2C Library
|
||||||
|
|
||||||
|
I wrote this code myself, so there is no license restriction.
|
||||||
|
So this code allows anyone to write with confidence.
|
||||||
|
But keep it as long as the original author of the code.
|
||||||
|
Ian KD8CEC
|
||||||
|
**************************************************************************/
|
||||||
|
#define UBITX_DISPLAY_LCD2004_BASE
|
||||||
|
|
||||||
|
#define En B00000100 // Enable bit
|
||||||
|
#define Rw B00000010 // Read/Write bit
|
||||||
|
#define Rs B00000001 // Register select bit
|
||||||
|
|
||||||
|
#define LCD_Command(x) (LCD_Send(x, 0))
|
||||||
|
#define LCD_Write(x) (LCD_Send(x, Rs))
|
||||||
|
|
||||||
|
uint8_t _Addr;
|
||||||
|
uint8_t _displayfunction;
|
||||||
|
uint8_t _displaycontrol;
|
||||||
|
uint8_t _displaymode;
|
||||||
|
uint8_t _numlines;
|
||||||
|
uint8_t _cols;
|
||||||
|
uint8_t _rows;
|
||||||
|
uint8_t _backlightval;
|
||||||
|
|
||||||
|
#define printIIC(args) Wire.write(args)
|
||||||
|
|
||||||
|
void expanderWrite(uint8_t _data)
|
||||||
|
{
|
||||||
|
Wire.beginTransmission(_Addr);
|
||||||
|
printIIC((int)(_data) | _backlightval);
|
||||||
|
Wire.endTransmission();
|
||||||
|
}
|
||||||
|
|
||||||
|
void pulseEnable(uint8_t _data){
|
||||||
|
expanderWrite(_data | En); // En high
|
||||||
|
delayMicroseconds(1); // enable pulse must be >450ns
|
||||||
|
|
||||||
|
expanderWrite(_data & ~En); // En low
|
||||||
|
delayMicroseconds(50); // commands need > 37us to settle
|
||||||
|
}
|
||||||
|
|
||||||
|
void write4bits(uint8_t value)
|
||||||
|
{
|
||||||
|
expanderWrite(value);
|
||||||
|
pulseEnable(value);
|
||||||
|
}
|
||||||
|
|
||||||
|
void LCD_Send(uint8_t value, uint8_t mode)
|
||||||
|
{
|
||||||
|
uint8_t highnib=value&0xf0;
|
||||||
|
uint8_t lownib=(value<<4)&0xf0;
|
||||||
|
write4bits((highnib)|mode);
|
||||||
|
write4bits((lownib)|mode);
|
||||||
|
}
|
||||||
|
|
||||||
|
|
||||||
|
// Turn the (optional) backlight off/on
|
||||||
|
void noBacklight(void) {
|
||||||
|
_backlightval=LCD_NOBACKLIGHT;
|
||||||
|
expanderWrite(0);
|
||||||
|
}
|
||||||
|
|
||||||
|
void backlight(void) {
|
||||||
|
_backlightval=LCD_BACKLIGHT;
|
||||||
|
expanderWrite(0);
|
||||||
|
}
|
||||||
|
|
||||||
|
void LCD2004_Init()
|
||||||
|
{
|
||||||
|
//I2C Init
|
||||||
|
_Addr = I2C_DISPLAY_ADDRESS;
|
||||||
|
_cols = 20;
|
||||||
|
_rows = 4;
|
||||||
|
_backlightval = LCD_NOBACKLIGHT;
|
||||||
|
Wire.begin();
|
||||||
|
|
||||||
|
delay(50);
|
||||||
|
|
||||||
|
// Now we pull both RS and R/W low to begin commands
|
||||||
|
expanderWrite(_backlightval); // reset expanderand turn backlight off (Bit 8 =1)
|
||||||
|
delay(1000);
|
||||||
|
//put the LCD into 4 bit mode
|
||||||
|
// this is according to the hitachi HD44780 datasheet
|
||||||
|
// figure 24, pg 46
|
||||||
|
|
||||||
|
// we start in 8bit mode, try to set 4 bit mode
|
||||||
|
write4bits(0x03 << 4);
|
||||||
|
delayMicroseconds(4500); // wait min 4.1ms
|
||||||
|
|
||||||
|
// second try
|
||||||
|
write4bits(0x03 << 4);
|
||||||
|
delayMicroseconds(4500); // wait min 4.1ms
|
||||||
|
|
||||||
|
// third go!
|
||||||
|
write4bits(0x03 << 4);
|
||||||
|
delayMicroseconds(150);
|
||||||
|
|
||||||
|
// finally, set to 4-bit interface
|
||||||
|
write4bits(0x02 << 4);
|
||||||
|
|
||||||
|
// finally, set # lines, font size, etc.
|
||||||
|
LCD_Command(LCD_FUNCTIONSET | LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS | LCD_2LINE);
|
||||||
|
|
||||||
|
// turn the display on with no cursor or blinking default
|
||||||
|
LCD_Command(LCD_DISPLAYCONTROL | LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF);
|
||||||
|
|
||||||
|
// clear it off
|
||||||
|
LCD_Command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
|
||||||
|
//delayMicroseconds(2000); // this command takes a long time!
|
||||||
|
delayMicroseconds(1000); // this command takes a long time!
|
||||||
|
|
||||||
|
LCD_Command(LCD_ENTRYMODESET | LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT);
|
||||||
|
|
||||||
|
backlight();
|
||||||
|
}
|
||||||
|
#endif
|
||||||
|
//========================================================================
|
||||||
|
//End of I2CTinyLCD Library by KD8CEC
|
||||||
|
//========================================================================
|
||||||
|
|
||||||
|
|
||||||
|
//========================================================================
|
||||||
|
// 20 X 04 LCD Routines
|
||||||
|
//Begin of Display Base Routines (Init, printLine..)
|
||||||
|
//========================================================================
|
||||||
|
#ifdef UBITX_DISPLAY_LCD2004_BASE
|
||||||
|
|
||||||
void LCD_Print(const char *c)
|
void LCD_Print(const char *c)
|
||||||
{
|
{
|
||||||
@ -167,20 +320,10 @@ void LCD_CreateChar(uint8_t location, uint8_t charmap[])
|
|||||||
for (int i=0; i<8; i++)
|
for (int i=0; i<8; i++)
|
||||||
LCD_Write(charmap[i]);
|
LCD_Write(charmap[i]);
|
||||||
}
|
}
|
||||||
//========================================================================
|
|
||||||
//End of TinyLCD Library by KD8CEC
|
|
||||||
//========================================================================
|
|
||||||
|
|
||||||
/*
|
|
||||||
#include <LiquidCrystal.h>
|
|
||||||
LiquidCrystal lcd(8,9,10,11,12,13);
|
|
||||||
*/
|
|
||||||
//SWR GRAPH, DrawMeter and drawingMeter Logic function by VK2ETA
|
//SWR GRAPH, DrawMeter and drawingMeter Logic function by VK2ETA
|
||||||
//#define OPTION_SKINNYBARS
|
//#define OPTION_SKINNYBARS
|
||||||
|
|
||||||
//========================================================================
|
|
||||||
//Begin of Display Base Routines (Init, printLine..)
|
|
||||||
//========================================================================
|
|
||||||
char c[30], b[30];
|
char c[30], b[30];
|
||||||
char printBuff[4][20]; //mirrors what is showing on the two lines of the display
|
char printBuff[4][20]; //mirrors what is showing on the two lines of the display
|
||||||
|
|
||||||
@ -623,6 +766,7 @@ char checkCount = 0;
|
|||||||
int currentSMeter = 0;
|
int currentSMeter = 0;
|
||||||
//int sMeterLevels[] = {0, 5, 17, 41, 74, 140, 255, 365, 470};
|
//int sMeterLevels[] = {0, 5, 17, 41, 74, 140, 255, 365, 470};
|
||||||
byte scaledSMeter = 0;
|
byte scaledSMeter = 0;
|
||||||
|
char checkCountSMeter = 0;
|
||||||
|
|
||||||
//execute interval : 0.25sec
|
//execute interval : 0.25sec
|
||||||
void idle_process()
|
void idle_process()
|
||||||
@ -660,7 +804,7 @@ void idle_process()
|
|||||||
// testValue = 0;
|
// testValue = 0;
|
||||||
|
|
||||||
//S-Meter Display
|
//S-Meter Display
|
||||||
if ((displayOption1 & 0x08) == 0x08 && (sdrModeOn == 0))
|
if (((displayOption1 & 0x08) == 0x08 && (sdrModeOn == 0)) && (++checkCountSMeter > SMeterLatency))
|
||||||
{
|
{
|
||||||
int newSMeter;
|
int newSMeter;
|
||||||
|
|
||||||
@ -1,22 +0,0 @@
|
|||||||
/*************************************************************************
|
|
||||||
KD8CEC's uBITX Display Routine for LCD2404 I2C
|
|
||||||
uBITX Idle time Processing
|
|
||||||
Functions that run at times that do not affect TX, CW, and CAT
|
|
||||||
It is called in 1/10 time unit.
|
|
||||||
-----------------------------------------------------------------------------
|
|
||||||
This program is free software: you can redistribute it and/or modify
|
|
||||||
it under the terms of the GNU General Public License as published by
|
|
||||||
the Free Software Foundation, either version 3 of the License, or
|
|
||||||
(at your option) any later version.
|
|
||||||
|
|
||||||
This program is distributed in the hope that it will be useful,
|
|
||||||
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
||||||
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
||||||
GNU General Public License for more details.
|
|
||||||
|
|
||||||
You should have received a copy of the GNU General Public License
|
|
||||||
along with this program. If not, see <http://www.gnu.org/licenses/>.
|
|
||||||
|
|
||||||
**************************************************************************/
|
|
||||||
|
|
||||||
|
|
||||||
Loading…
Reference in New Issue
Block a user