2018-01-09 21:29:25 -05:00
|
|
|
#uBITX
|
|
|
|
|
uBITX firmware, written for the Raduino/Arduino control of uBITX transceivers
|
|
|
|
|
This project is based on https://github.com/afarhan/ubitx and all copyright is inherited.
|
|
|
|
|
The copyright information of the original is below.
|
2017-12-06 23:52:46 -05:00
|
|
|
|
2018-01-09 21:29:25 -05:00
|
|
|
KD8CEC
|
|
|
|
|
----------------------------------------------------------------------------
|
|
|
|
|
## REVISION RECORD
|
|
|
|
|
0.25
|
|
|
|
|
- Beta Version Released
|
|
|
|
|
http://www.hamskey.com/2018/01/release-beta-version-of-cat-support.html
|
|
|
|
|
- Added CAT Protocol for uBITX
|
|
|
|
|
- Modified the default usb carrier value used when the setting is wrong.
|
|
|
|
|
- Fixed a routine to repair when the CAT protocol was interrupted.
|
|
|
|
|
|
|
|
|
|
0.24
|
|
|
|
|
- Program optimization
|
|
|
|
|
reduce usage ram rate (string with M() optins)
|
|
|
|
|
- Optimized CAT protocol for wsjt-x, fldigi
|
|
|
|
|
|
|
|
|
|
0.23
|
|
|
|
|
- added delay_background() , replace almost delay() to delay_background for prevent timeout
|
|
|
|
|
- cat library compatible with FT-817 Command
|
|
|
|
|
switch VFOA / VFOB,
|
|
|
|
|
Read Write CW Speed
|
|
|
|
|
Read Write CW Delay Time
|
|
|
|
|
Read Write CW Pitch (with sidetone)
|
|
|
|
|
All of these can be controlled by Hamradio deluxe.
|
|
|
|
|
|
|
|
|
|
- modified cat libray function for protocol for CAT communication is not broken in CW or TX mode
|
|
|
|
|
- Ability to change CW Delay
|
|
|
|
|
- Added Dial Lock function
|
|
|
|
|
- Add functions CW Start dely (TX -> CW interval)
|
|
|
|
|
- Automatic storage of VFO frequency
|
|
|
|
|
It was implemented by storing it only once when the frequency stays 10 seconds or more after the change.
|
|
|
|
|
(protect eeprom life)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.22
|
|
|
|
|
- fixed screen Update Problem
|
|
|
|
|
- Frequency Display Problem - Problems occur below 1Mhz
|
|
|
|
|
- added function Enhanced CAT communication
|
|
|
|
|
- replace ubitx_cat.ino to cat_libs.ino
|
|
|
|
|
- Save mode when switching to VFOA / VFOB
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.21
|
|
|
|
|
- fixed the cw side tone configuration.
|
|
|
|
|
- Fix the error that the frequency is over.
|
|
|
|
|
- fixed frequency display (alignment, point)
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
0.20
|
|
|
|
|
- original uBITX software (Ashhar Farhan)
|
|
|
|
|
|
|
|
|
|
## Original README.md
|
2017-12-06 23:52:46 -05:00
|
|
|
uBITX firmware, written for the Raduino/Arduino control of uBITX transceigers
|
|
|
|
|
|
|
|
|
|
Copyright (C) 2017, Ashhar Farhan
|
|
|
|
|
|
|
|
|
|
This program is free software: you can redistribute it and/or modify
|
|
|
|
|
it under the terms of the GNU General Public License as published by
|
|
|
|
|
the Free Software Foundation, either version 3 of the License, or
|
|
|
|
|
(at your option) any later version.
|
|
|
|
|
|
|
|
|
|
This program is distributed in the hope that it will be useful,
|
|
|
|
|
but WITHOUT ANY WARRANTY; without even the implied warranty of
|
|
|
|
|
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
|
|
|
|
GNU General Public License for more details.
|
|
|
|
|
|
|
|
|
|
You should have received a copy of the GNU General Public License
|
|
|
|
|
along with this program. If not, see <https://www.gnu.org/licenses/>.
|
