mirror of
https://github.com/rfivet/stm32bringup.git
synced 2024-12-18 06:46:23 -05:00
124 lines
5.7 KiB
C
124 lines
5.7 KiB
C
/* stm32f030xx.h -- STM32F030xx specific mapping */
|
|
/* Copyright (c) 2021 Renaud Fivet */
|
|
|
|
/** CORE **********************************************************************/
|
|
|
|
#define SYSTICK ((volatile unsigned long *) 0xE000E010)
|
|
#define SYSTICK_CSR SYSTICK[ 0]
|
|
#define SYSTICK_RVR SYSTICK[ 1]
|
|
#define SYSTICK_CVR SYSTICK[ 2]
|
|
|
|
#define NVIC ((volatile long *) 0xE000E100)
|
|
#define NVIC_ISER NVIC[ 0]
|
|
#define unmask_irq( idx) NVIC_ISER = 1 << idx
|
|
#define USART1_IRQ_IDX 27
|
|
|
|
|
|
/** PERIPH ********************************************************************/
|
|
|
|
#define CAT( a, b) a##b
|
|
#define RCC ((volatile long *) 0x40021000)
|
|
|
|
#define RCC_CR RCC[ 0]
|
|
#define RCC_CR_HSION 0x00000001 /* 1: Internal High Speed clock enable */
|
|
#define RCC_CR_HSEON 0x00010000 /* 16: External High Speed clock enable */
|
|
#define RCC_CR_HSERDY 0x00020000 /* 17: External High Speed clock ready flag */
|
|
#define RCC_CR_PLLON 0x01000000 /* 24: PLL enable */
|
|
#define RCC_CR_PLLRDY 0x02000000 /* 25: PLL clock ready flag */
|
|
|
|
#define RCC_CFGR RCC[ 1]
|
|
#define RCC_CFGR_SW_MSK 0x00000003 /* 1-0: System clock SWitch Mask */
|
|
#define RCC_CFGR_SW_HSE 0x00000001 /* 1-0: Switch to HSE as system clock */
|
|
#define RCC_CFGR_SW_PLL 0x00000002 /* 1-0: Switch to PLL as system clock */
|
|
#define RCC_CFGR_SWS_MSK 0x0000000C /* 3-2: System clock SWitch Status Mask */
|
|
#define RCC_CFGR_SWS_HSE 0x00000004 /* 3-2: HSE used as system clock */
|
|
#define RCC_CFGR_SWS_PLL 0x00000008 /* 3-2: PLL used as system clock */
|
|
#define RCC_CFGR_PLLSRC 0x00010000
|
|
#define RCC_CFGR_PLLSRC_HSI 0x00000000 /* HSI / 2 */
|
|
#define RCC_CFGR_PLLSRC_HSE 0x00010000 /* HSE */
|
|
#define RCC_CFGR_PLLXTPRE 0x00020000
|
|
#define RCC_CFGR_PLLXTPRE_DIV1 0x00000000 /* HSE */
|
|
#define RCC_CFGR_PLLXTPRE_DIV2 0x00020000 /* HSE / 2 */
|
|
#define RCC_CFGR_PLLMUL_MSK (0x0F << 18)
|
|
#define RCC_CFGR_PLLMUL( v) ((v - 2) << 18)
|
|
|
|
#define RCC_AHBENR RCC[ 5]
|
|
#define RCC_AHBENR_CRCEN (1 << 6) /* 6: CRC clock enable */
|
|
#define RCC_AHBENR_IOPn( n) (1 << (17 + n))
|
|
#define RCC_AHBENR_IOPh( h) RCC_AHBENR_IOPn( CAT( 0x, h) - 0xA)
|
|
|
|
#define RCC_APB2ENR RCC[ 6]
|
|
#define RCC_APB2ENR_USART1EN 0x00004000 /* 14: USART1 clock enable */
|
|
#define RCC_APB2ENR_ADCEN 0x00000200 /* 9: ADC clock enable */
|
|
#define RCC_APB2ENR_SYSCFGEN 0x00000001 /* 1: SYSCFG clock enable */
|
|
|
|
#define RCC_CR2 RCC[ 13]
|
|
#define RCC_CR2_HSI14ON 0x00000001 /* 1: HSI14 clock enable */
|
|
#define RCC_CR2_HSI14RDY 0x00000002 /* 2: HSI14 clock ready */
|
|
|
|
|
|
#define CRC ((volatile unsigned *) 0x40023000)
|
|
#define CRC_DR CRC[ 0]
|
|
#define CRC_IDR CRC[ 1]
|
|
#define CRC_CR CRC[ 2]
|
|
#define CRC_INIT CRC[ 4]
|
|
|
|
|
|
#define GPIOA ((volatile long *) 0x48000000)
|
|
#define GPIOB ((volatile long *) 0x48000400)
|
|
#define GPIO( x) CAT( GPIO, x)
|
|
#define MODER 0
|
|
#define IDR 4
|
|
#define ODR 5
|
|
#define AFRH 9
|
|
|
|
#define SYSCFG ((volatile long *) 0x40010000)
|
|
#define SYSCFG_CFGR1 SYSCFG[ 0]
|
|
|
|
#define ADC ((volatile long *) 0x40012400)
|
|
#define ADC_ISR ADC[ 0]
|
|
#define ADC_ISR_ADRDY 1 /* 0: ADC Ready */
|
|
#define ADC_ISR_EOC 4 /* 2: End Of Conversion flag */
|
|
|
|
#define ADC_CR ADC[ 2]
|
|
#define ADC_CR_ADEN 1 /* 0: ADc ENable command */
|
|
#define ADC_CR_ADSTART 4 /* 2: ADC Start Conversion command */
|
|
#define ADC_CR_ADCAL (1 << 31) /* 31: ADC Start Calibration cmd */
|
|
|
|
#define ADC_CFGR1 ADC[ 3] /* Configuration Register 1 */
|
|
#define ADC_CFGR1_SCANDIR 4 /* 2: Scan sequence direction */
|
|
#define ADC_CFGR1_DISCEN (1 << 16) /* 16: Enable Discontinuous mode */
|
|
|
|
#define ADC_CFGR2 ADC[ 4] /* Configuration Register 2 */
|
|
#define ADC_CFGR2_CKMODE (3 << 30) /* 31-30: Clock Mode Mask */
|
|
/* 31-30: Default 00 HSI14 */
|
|
#define ADC_CFGR2_PCLK2 (1 << 30) /* 31-30: PCLK/2 */
|
|
#define ADC_CFGR2_PCLK4 (2 << 30) /* 31-30: PCLK/4 */
|
|
|
|
#define ADC_SMPR ADC[ 5] /* Sampling Time Register */
|
|
#define ADC_CHSELR ADC[ 10] /* Channel Selection Register */
|
|
#define ADC_DR ADC[ 16] /* Data Register */
|
|
#define ADC_CCR ADC[ 194] /* Common Configuration Register */
|
|
#define ADC_CCR_VREFEN (1 << 22) /* 22: Vrefint Enable */
|
|
#define ADC_CCR_TSEN (1 << 23) /* 23: Temperature Sensor Enable */
|
|
|
|
#define USART1 ((volatile long *) 0x40013800)
|
|
#define CR1 0 /* Config Register */
|
|
#define BRR 3 /* BaudRate Register */
|
|
#define ISR 7 /* Interrupt and Status Register */
|
|
#define TDR 10 /* Transmit Data Register*/
|
|
#define USART_CR1_TXEIE (1 << 7) /* 7: TDR Empty Interrupt Enable */
|
|
#define USART_CR1_TE 8 /* 3: Transmit Enable */
|
|
#define USART_CR1_RE 4 /* 2: Receive Enable */
|
|
#define USART_CR1_UE 1 /* 0: USART Enable */
|
|
#define USART_ISR_TXE (1 << 7) /* 7: Transmit Data Register Empty */
|
|
|
|
|
|
/** SYSTEM MEMORY *************************************************************/
|
|
/* STM32F030 calibration addresses (at 3.3V and 30C) */
|
|
#define TS_CAL ((const unsigned short *) 0x1FFFF7B8)
|
|
#define VREFINT_CAL ((const unsigned short *) 0x1FFFF7BA)
|
|
#define TS_CAL2 ((const unsigned short *) 0x1FFFF7C2)
|
|
|
|
/* end of stm32f030xx.h */
|