fix printf when used with --regex

strip parentheses from the Optionals line

replace deprecated autotools commands in INSTALL

AUTHORS

@@ -1,2 +1 @@
 Johannes Winkelmann, jw@tks6.net
-John McQuah, jmq@rawtext.club

ChangeLog

@@ -1,39 +1,15 @@
 *               31.08.2023      John McQuah
-- allow deletion of build log when a package is removed (feature requested
+- allow prt-get to remove build log when uninstalling a package (feature
-by samsep10l)
+requested by samsep10l)
-- man-page updates
-  - demonstrate how to troubleshoot a failed depinst due to omitted softdeps
-  - discuss the rmlog_on_uninst feature
 
-*               29.05.2023      John McQuah
+*               31.03.2023      John McQuah
-- eliminate code duplication in printDepTree
+- respect the user's choice of --install-root when running pre- or
-- respect the user's choice of --install-root when running pre- and
 post-install scripts
-- update man-page with an example of core-only sysup
-- switch from autotools to meson
-
-*               19.03.2023      John McQuah
-- switch between install and update on a port-by-port basis, whichever is needed
-- allow dependency injection during sysup (controllable via --nodeps)
-- check whether a built package already exists before calling pkgmk
-- consolidate printDependent and printDepTree
-- consolidate sysup, printQuickDiff, and printDiff
-- let the argParser recognize some synonyms for old commands
-- assign meanings to --nodeps and --depsort for other subroutines
 
 * 		10.03.2023	John McQuah
-- make it possible for the dependency resolver to consider optionals
+- make it possible to consider optional dependencies when updating
-
+- bump version of the cache file format, to warn users about the
-*               27.02.2022      Alexandr Savca, Tim Biermann
+'Packager' field being replaced by 'Optional'
-- fix segfault in prt-cache
-
-* 5.19.5        16.10.2020      Matt Housh, Juergen Daubert
-- add a regex fix for listinst
-- move aliases file to /etc
-
-* 5.19.2        01.03.2019      James Buren
-- fix misc compiler warnings
-- fix FS#1646, caused by wrong use of close() instead of fclose()
 
 * 5.16		26.06.2008	Johannes Winkelmann
 - don't loop forever when version= contains unsupported $() tokens

FAQ

@@ -0,0 +1,8 @@
+Q: Why are there no wildcards for install/update/grpinst
+A: Because you don't want it (dependencies)
+
+Q: Why is there no prt-get depinst?
+A:
+
+Q: Why is there no GUI or shared lib for/of prt-get?
+A:

README

@@ -9,7 +9,6 @@ ports from crux (http://crux.nu). It offers some simplification over
 pure pkgmk, but might hide some interesting details about the install
 process. 
 
-
 Installing:
 -----------
 Download an iso of the latest CRUX release for a precompiled package.
@@ -24,20 +23,18 @@ found _first_ will be used.
 Feel free to file a bug report on the Gitea issue tracker:
 https://git.crux.nu:82/farkuhar/prt-get/issues/
 
-
+more information
-More information:
+----------------
------------------
+See the man pages for prt-get(8), prt-get.conf(5) and prt-cache for more
-See the man pages for prt-get(8), prt-get.conf(5) and prt-cache(8) for more
 information. The CRUX homepage also offers a (somewhat dated) User Manual
 and Quick Start guide:
 https://crux.nu/doc/prt-get%20-%20User%20Manual.html
 https://crux.nu/doc/prt-get%20-%20Quick%20start.html
 
-
 "it must be user error" (thinkgeek)
 -----------------------------------
 
-Port directories may only contain ports, or else prt-get can fail (which
+port directories may only contain ports, or else prt-get can fail (which
-means that nothing is installed, your system suffers no harm). The reason
+means that nothing is installed, your system takes no harm). The reason
 for this is because the additional checking slows down the application
-too much.
+too much

TODO

@@ -1,5 +1,5 @@
 - add --rebuild-set to dependent
-- allow dependency injection for sysup (done), with previews (?)
+- allow dependency injection for sysup, with previews
 - prefer toolchain (patch in trac)
 - logging: check for non-root owned symlinks
 - logging: reject relative logfile names

doc/Makefile.am

@@ -0,0 +1,10 @@
+
+man_MANS = prt-get.8 prt-cache.8 prt-get.conf.5
+
+clean-local:
+	rm -rf *.log *.aux *.toc *.dvi *.idx *.pdf api 
+
+apidoc:
+	doxygen
+
+EXTRA_DIST = $(man_MANS) coding

doc/Makefile.in

@@ -0,0 +1,492 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = doc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(top_srcdir)/mkinstalldirs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+man5dir = $(mandir)/man5
+am__installdirs = "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"
+man8dir = $(mandir)/man8
+NROFF = nroff
+MANS = $(man_MANS)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+man_MANS = prt-get.8 prt-cache.8 prt-get.conf.5
+EXTRA_DIST = $(man_MANS) coding
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu doc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-man5: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man5dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man5dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man5dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.5[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man5dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man5dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man5dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man5dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man5:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man5dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.5[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^5][0-9a-z]*$$,5,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man5dir)'; $(am__uninstall_files_from_dir)
+install-man8: $(man_MANS)
+	@$(NORMAL_INSTALL)
+	@list1=''; \
+	list2='$(man_MANS)'; \
+	test -n "$(man8dir)" \
+	  && test -n "`echo $$list1$$list2`" \
+	  || exit 0; \
+	echo " $(MKDIR_P) '$(DESTDIR)$(man8dir)'"; \
+	$(MKDIR_P) "$(DESTDIR)$(man8dir)" || exit 1; \
+	{ for i in $$list1; do echo "$$i"; done;  \
+	if test -n "$$list2"; then \
+	  for i in $$list2; do echo "$$i"; done \
+	    | sed -n '/\.8[a-z]*$$/p'; \
+	fi; \
+	} | while read p; do \
+	  if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; echo "$$p"; \
+	done | \
+	sed -e 'n;s,.*/,,;p;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,' | \
+	sed 'N;N;s,\n, ,g' | { \
+	list=; while read file base inst; do \
+	  if test "$$base" = "$$inst"; then list="$$list $$file"; else \
+	    echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \
+	    $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst" || exit $$?; \
+	  fi; \
+	done; \
+	for i in $$list; do echo "$$i"; done | $(am__base_list) | \
+	while read files; do \
+	  test -z "$$files" || { \
+	    echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(man8dir)'"; \
+	    $(INSTALL_DATA) $$files "$(DESTDIR)$(man8dir)" || exit $$?; }; \
+	done; }
+
+uninstall-man8:
+	@$(NORMAL_UNINSTALL)
+	@list=''; test -n "$(man8dir)" || exit 0; \
+	files=`{ for i in $$list; do echo "$$i"; done; \
+	l2='$(man_MANS)'; for i in $$l2; do echo "$$i"; done | \
+	  sed -n '/\.8[a-z]*$$/p'; \
+	} | sed -e 's,.*/,,;h;s,.*\.,,;s,^[^8][0-9a-z]*$$,8,;x' \
+	      -e 's,\.[0-9a-z]*$$,,;$(transform);G;s,\n,.,'`; \
+	dir='$(DESTDIR)$(man8dir)'; $(am__uninstall_files_from_dir)
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@list='$(MANS)'; if test -n "$$list"; then \
+	  list=`for p in $$list; do \
+	    if test -f $$p; then d=; else d="$(srcdir)/"; fi; \
+	    if test -f "$$d$$p"; then echo "$$d$$p"; else :; fi; done`; \
+	  if test -n "$$list" && \
+	    grep 'ab help2man is required to generate this page' $$list >/dev/null; then \
+	    echo "error: found man pages containing the 'missing help2man' replacement text:" >&2; \
+	    grep -l 'ab help2man is required to generate this page' $$list | sed 's/^/         /' >&2; \
+	    echo "       to fix them, install help2man, remove and regenerate the man pages;" >&2; \
+	    echo "       typically 'make maintainer-clean' will remove them" >&2; \
+	    exit 1; \
+	  else :; fi; \
+	else :; fi
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(MANS)
+installdirs:
+	for dir in "$(DESTDIR)$(man5dir)" "$(DESTDIR)$(man8dir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic clean-local mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am: install-man
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am:
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man: install-man5 install-man8
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-man
+
+uninstall-man: uninstall-man5 uninstall-man8
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic clean-local \
+	distclean distclean-generic distdir dvi dvi-am html html-am \
+	info info-am install install-am install-data install-data-am \
+	install-dvi install-dvi-am install-exec install-exec-am \
+	install-html install-html-am install-info install-info-am \
+	install-man install-man5 install-man8 install-pdf \
+	install-pdf-am install-ps install-ps-am install-strip \
+	installcheck installcheck-am installdirs maintainer-clean \
+	maintainer-clean-generic mostlyclean mostlyclean-generic pdf \
+	pdf-am ps ps-am uninstall uninstall-am uninstall-man \
+	uninstall-man5 uninstall-man8
+
+
+clean-local:
+	rm -rf *.log *.aux *.toc *.dvi *.idx *.pdf api 
+
+apidoc:
+	doxygen
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

doc/i3-softdeps.md

@@ -1,110 +0,0 @@
-# Followup on installing i3 with the softdeps-aware fork of prt-get
-## (Was: Re: [prt-get nicetohave](https://lists.crux.nu/pipermail/crux/2023-August/007375.html))
-## 2023-08-25
-
-The "Optional" metadata field stirred up some controversy when first
-proposed. At the time, it was preferred to write Pkgfiles whose build()
-functions contain no branching logic to customize the build for the host 
-machine. Maintainers would even try to suppress the branching logic hidden 
-inside the autotools ./configure script using command-line switches to 
-hard-code the desired defaults [1]. Peer pressure eventually wore away at 
-the resistance to this new metadata field, so it is now in widespread use 
-despite there being no official mandate for contributors to test their ports 
-under all possible configurations. Whenever a port can adapt to a variety of 
-use-cases, maintainers try to document that versatility in the "Optional" 
-field. But our package management tools remain unable to use that data! At 
-present, it requires a human reading the Pkgfile, for the data in the "Optional" 
-field to affect the order in which ports are built. Thankfully, sorting with 
-optional dependencies taken into account is now possible in prt-get itself, 
-either with the 
-[softdeps](https://git.crux.nu:82/farkuhar/prt-get/src/branch/softdeps) or the 
-[mixed-upinst](https://git.crux.nu:82/farkuhar/prt-get/src/branch/mixed-upinst) 
-branch of the fork by farkuhar.
-
-Respecting the limitations of a prt-get that only knows about hard dependencies
-would entail following the old practice and hard-coding the configure options 
-in each port. This example of letting our tools dictate how we work (rather
-than updating the tools to fit a new workflow) would encourage a portdb more 
-like the AUR, with a seemingly endless variety of dups that all have 
-their own particular combination of configure options. Thankfully the 
-unwieldiness of this prospect was enough to deter maintainers from clinging to 
-an outmoded interpretation of KISS [3], and they adopted the new norm of 
-"fluid Pkgfiles" (FS#1576) even as prt-get remained unable to incorporate this 
-fluidity in its operations.
-
-As recently as November 2021, users of CRUX could still have noticed a remnant 
-of the historical preference for non-fluid Pkgfiles, illustrated by the 
-coexisting pair harfbuzz and harfbuzz-icu. These ports differed from each other 
-only in the configuration option that enables linking to icu. A port that 
-depends on the icu-linked harfbuzz would list harfbuzz-icu among its 
-dependencies, while a port that did not require such linking would only 
-list harfbuzz.
-
-Such dups in the portdb, all using the same upstream tarball, inevitably
-have overlapping footprints, and it becomes impossible to avoid filesystem
-collisions if a user running `prt-get depinst foo` triggers an attempt to
-pkgadd a variant of an already-installed port. Once the set of installed
-ports is sufficiently diverse, maintaining prt-get.aliases so as to avoid
-such collisions becomes an impossible task.
-
-Nix (and GoboLinux even earlier) solves the overlapping footprint problem
-by giving each package its own separate directory in the filesystem. This
-solution arguably fits quite well with the historical CRUX preference for
-rigid Pkgfiles, offering a one-to-one correspondence between a repository
-of non-fluid ports, and the filesystem where built packages are unpacked.
-But CRUX was reluctant to impose an additional layer of complexity on top
-of the Filesystem Hierarchy Standard, and so the Nix and GoboLinux solution
-never gained serious consideration in the CRUX community.
-
-As the last vestige of a historical preference for non-fluid ports,
-harfbuzz and harfbuzz-icu persisted alongside each other until surprisingly
-recently, only getting merged into one fluid port with commit
-b2e30dbf8c96e03f4fe4b39b1e5ffbecd8372787. This merge allowed users to
-simplify prt-get.aliases, removing `harfbuzz-icu: harfbuzz` (if they had
-ever added such an entry to avoid filesystem collisions).
-
-Equipping prt-get with softdeps awareness is just letting our tools evolve
-to match the trend toward fluid Pkgfiles. If the new prt-get capabilities 
-are deemed to violate the CRUX Mantra [2], then the same criticism can be 
-leveled against fluid Pkgfiles. Such criticisms were in fact expressed 
-(by Anton most stridently, and by Tilman and Juergen in a gentler tone) 
-during the discussions of USE flags and "prt-get nicetohave" [3,4]. But the 
-resistance to fluid Pkgfiles has diminished over the years, to such an extent 
-that nobody has seriously proposed crafting the dependency graph so that 
-`prt-get depinst i3` is impossible to fail [5], say by making i3 depend on a 
-duplicate port libxkbcommon-x11 (which would differ from libxkbcommon only by 
-hard-coding the meson option "-D enable-x11" and by listing xkeyboard-config 
-as a hard dependency --- similar to how harfbuzz-icu differed from harfbuzz).
-
-A duplicate port of libxkbcommon is indeed a KISS solution, with prt-get in its
-present state. That nobody bothered to propose such a dup is a clear indication 
-that we are not going back to non-fluid Pkgfiles anytime soon. So either our 
-Pkgfiles have irrevocably become "just a bit" more complex (and therefore no 
-longer "simple"), or they are in fact the simplest way to accommodate the modern 
-software landscape. In the latter case, a KISS objection to the corresponding 
-logic in prt-get is hypocritical. In the former case, it could be argued that two 
-wrongs do not make a right, and the trend away from KISS Pkgfiles does not 
-justify making prt-get "just a bit" more complex. But then we would have an 
-awkward mismatch between the capabilities of prt-get, and the ports that it 
-has to handle. This mismatch is only a slight annoyance at present (the 
-experienced users that make up the CRUX target audience can usually diagnose
-the problem themselves if they encounter a build failure like [5]), but before the
-software landscape becomes even more convoluted and such build failures harder 
-to avoid, we should have the discussion on adding new logic to prt-get.
-
-[1] It should be noted that the autotools ./configure script (or its
-meson or cmake counterpart) might not actually expose all compile-time 
-options via command-line switches. Hence some testing of the host 
-environment is unavoidable, unless the port maintainer performs substantial
-downstream patching of the source tree.
-
-[2] We do not want to prepare for all necessities and build a complex system
-which in 90% of all cases is overkill ... making something "just a bit"
-more complex is not "simple" anymore. (https://crux.nu/Main/Mantra)
-
-[3] https://lists.crux.nu/pipermail/crux-devel/2006-August/001912.html
-
-[4] https://lists.crux.nu/pipermail/crux-devel/2008-May/003366.html
-
-[5] The possibility of this command failing was first noted by jaeger in 
-https://libera.irclog.whitequark.org/crux/2023-08-21 (16:36)

doc/i3-softdeps.test

@@ -1,291 +0,0 @@
-Thanks to hestia and jaeger for inspiring this hacking session (2023-08-22).
-(Update 2023-08-25): see i3-softdeps.md in this directory for more
-discussion on the merits of adding new prt-get features.
-
-In light of the recent changes to libxkbcommon, jaeger made the observation
-that `prt-get depinst i3` on a core-only system hits an error, as
-libxkbcommon will be built without x11 support. To establish a reference point
-for subsequent experiments, here is the list of targets that would be selected
-by the latest official release of prt-get (5.19.6), in response to the
-recommended way of installing a desired port.
-
-All commands were performed on a pkg-cleaned installation of CRUX 3.7, leaving
-the ports at whatever outdated version they had when this particular system was
-last in daily use.
-
-In[0]: prt-get depinst --test i3
-Out[0]:
-*** prt-get: test mode
-
--- Packages installed
-fribidi
-xorg-util-macros
-xorg-libpixman
-libev
-libpng
-libxml2
-xorg-xtrans
-libxkbcommon
-libxslt
-xorg-xcb-proto
-yajl
-xorg-xorgproto
-freetype
-glib
-xorg-libice
-xorg-libxau
-xorg-libxdmcp
-fontconfig
-gobject-introspection
-xorg-libsm
-xorg-libxcb
-xorg-libx11
-xorg-xcb-util
-xorg-xcb-util-renderutil
-xorg-xcb-util-keysyms
-xorg-xcb-util-wm
-xorg-libxext
-xorg-libxrender
-xorg-libxt
-xorg-libxkbfile
-xorg-xcb-util-image
-xorg-xcb-util-xrm
-cairo
-startup-notification
-xorg-xkbcomp
-xorg-xcb-util-cursor
-harfbuzz
-xkeyboard-config
-xorg-libxft
-pango
-i3
-
--- installed packages with README files:
-fontconfig
-
-prt-get: installed successfully
-
-*** prt-get: test mode end
-
-As seen in the output above, at the time of building libxkbcommon, there are
-only 7 non-core ports installed, none of which is xkeyboard-config, 
-so the flag '-D enable-x11=false' gets passed to the meson setup command for
-libxkbcommon. Thus the necessary linking to x11 libs does not happen, and i3
-cannot compile successfully.
-
-Suppose we try to fix this omission in the most natural way: append
-xkeyboard-config at the end of i3's dependency list.
-
- sed -i '/^# Depends on/s/$/ xkeyboard-config/' /usr/ports/opt/i3/Pkgfile
-
-Even this change is not enough! prt-get is not aware of the optional
-dependency relationship between libxkbcommon and xkeyboard-config, and so
-cannot insist that libxkbcommon comes later in the list of targets. jw
-came to a similar conclusion 15 years ago (footnote 1).
-
-Let's see whether farkuhar's softdeps-aware fork can do any better on this
-task. The naive approach, prt-get depinst --softdeps i3, still doesn't work
-because it will not automagically make two passes through the dependency tree
-(the first pass to assemble a minimal installation set, and the second pass to
-insert edges in the digraph based on optional dependency relationships among
-the targets found). Instead, you have to manually ask for two traversals of the
-dependency tree using a command substitution.
-
-In[1]: prt-get isinst $(prt-get quickdep i3) | awk '/not installed/ {print $2}' \
-    | xargs prt-get depinst --test --softdeps
-
-(Note that it's also necessary to filter out the already-installed ports before
-passing the quickdep output to `prt-get depinst` because this branch still
-makes a distinction between install and update transactions.)
-
-Out[1]:
-*** prt-get: test mode
-
--- Packages installed
-fribidi
-xorg-util-macros
-xorg-libpixman
-libev
-xorg-xtrans
-libpng
-libxml2
-fontconfig
-libxslt
-xorg-xcb-proto
-yajl
-xorg-xorgproto
-glib [post: deferred]
-xorg-libxau
-xorg-libxdmcp
-xorg-libice
-xorg-libxcb
-xorg-libsm
-xorg-libx11
-xorg-xcb-util
-xorg-xcb-util-renderutil
-xorg-xcb-util-keysyms
-xorg-xcb-util-wm
-xorg-libxkbfile
-xorg-libxext
-xorg-libxrender
-xorg-libxt
-xorg-xcb-util-image
-xorg-xcb-util-xrm
-xorg-xkbcomp
-cairo
-startup-notification
-xorg-xcb-util-cursor
-xkeyboard-config
-gobject-introspection
-libxkbcommon
-harfbuzz
-freetype
-xorg-libxft
-pango
-i3
-
--- installed packages with README files:
-/usr/ports/opt/fontconfig
-
-prt-get: installed successfully
-
-*** prt-get: test mode end
-
-
-This output looks more likely to succeed. Note that libxkbcommon would be built
-AFTER its optional dependency xkeyboard-config, because when xkeyboard-config
-appears among the depinst targets, that dependency relationship gets
-incorporated into the sorting algorithm.
-
-
-The mixed-upinst branch of farkuhar's prt-get goes further. Not only do you 
-get the feature of respecting optional dependencies, you can also do the 
-command substitution without the awk filter, and the appropriate mode 
-(install or update) will be selected for each target.
-
-In[2]: prt-get depinst --softdeps --test $(prt-get quickdep i3)
-
-Out[2]: 
-*** prt-get: test mode
-
--- Successful packages 
-fribidi
-xz
-zlib
-ncurses
-expat
-libffi
-libnghttp2
-openssl
-libuv
-lzlib
-rhash
-xorg-util-macros
-libpcre2
-xorg-libpixman
-libev
-libpng
-elfutils
-libxml2
-readline
-fontconfig
-xorg-xtrans
-file
-curl
-libxslt
-sqlite3
-libarchive
-util-linux
-python3
-cmake
-python3-setuptools
-xorg-xcb-proto
-yajl
-meson
-xorg-xorgproto
-glib [post: deferred]
-xorg-libxau
-xorg-libxdmcp
-xorg-libice
-xorg-libxcb
-xorg-libsm
-xorg-libx11
-xorg-xcb-util
-xorg-xcb-util-renderutil
-xorg-xcb-util-keysyms
-xorg-xcb-util-wm
-xorg-libxkbfile
-xorg-libxext
-xorg-libxrender
-xorg-libxt
-xorg-xcb-util-image
-xorg-xcb-util-xrm
-xorg-xkbcomp
-cairo
-startup-notification
-xorg-xcb-util-cursor
-xkeyboard-config
-gobject-introspection
-libxkbcommon
-harfbuzz
-freetype
-xorg-libxft
-pango
-i3
-
---  Successful packages with README files:
-fontconfig
-
-prt-get: install successful.
-
-*** prt-get: test mode end
-
-The output of the last command reveals why we recommend performing a sysup
-before installing new ports. Because dependencies in core are not listed unless
-they are dynamically linked in, some of the out-of-date core ports on my test
-system would get updated later, possibly leading to breakage (e.g, if the
-desired port is relying on a new or backward-incompatible feature in one of
-the foundational pieces of the toolchain).
-
-Footnotes:
-1. https://lists.crux.nu/pipermail/crux-devel/2008-May/003375.html
-
-2. The more intuitive version of the above commands, `prt-get depinst
-   --test --softdeps i3`, currently does NOT consider the dependency 
-   relationship "libxkbcommon optionally depends on xkeyboard-config", because
-   the latter port is neither currently installed, nor listed explicitly as an
-   install target. This safeguard is meant to allow the operation to proceed
-   after a SINGLE pass through the deptree, without pulling in ALL the ports
-   listed as "Optional:" . In future we might consider letting the more
-   intuitive command automatically make TWO passes through the deptree:
-   first to pick up all the hard dependencies, and then to insert edges in the
-   digraph that encode the optional dependencies among these targets. But such
-   "automagic side-effects" (two traversals versus one) are typically frowned
-   upon in CRUX, so for now we are happy to employ the command substitution
-   $(prt-get quickdep i3) thereby communicating to prt-get our intention for
-   two traversals of the deptree.
-
-
-3. The result of trial 2 would be identical to that of 
-   `prt-get install --softdeps $(prt-get quickdep i3)` using the 
-   mixed-upinst branch, because 'install' on this branch behaves the same
-   as 'depinst'. In https://lists.crux.nu/pipermail/crux/2008-June/001784.html
-   jw describes this change as "prt-get no more silently assumes that the user
-   didn't want a particular dependency".
-   farkuhar's mixed-upinst branch still gives you the option to override this
-   dependency-resolution-by-default; you just have to enter 'install --nodeps' 
-   instead of simply 'install'.
-
-
-4. Some maintainers prefer to do a filesystem check to determine whether a
-   needed dependency was linked to one of its optional libraries, and then
-   exit early with a message alerting the user to rebuild one of the packages
-   in the dependency tree. See contrib/libreoffice for an example. This
-   preference is arguably more aligned with CRUX's stance against excessively
-   "holding the user's hand". The softdeps feature is not intended to supplant
-   the user's thinking, but rather to give convenient access to a more versatile
-   topological sorting algorithm than the one coded in the official prt-get. The
-   toposort algorithm used in the above experiments remains true to the style
-   of jw's original code, but you can see another working implementation in
-   farkuhar's Perl rewrite
-   https://git.sdf.org/jmq/Documentation/src/branch/master/scripts/prt-auf .

doc/prt-get.8

@@ -14,7 +14,7 @@ pkgutils from CRUX (see http://www.crux.nu)
 .B prt\-get command [options] <arguments>
 .br 
 .SH "DESCRIPTION"
-prt-get is a package management tool which provides additional
+prt\-get is a package management tool which provides additional
 functionality to the CRUX package management system. It works with the
 local ports tree and is therefore fully compatible with ports(8) and
 pkgmk(8)/pkgadd(8)/pkgrm(8). It offers the following features:
@@ -42,16 +42,16 @@ search within the ports
 
 .PP 
 
-What prt-get basically does is build, install/upgrade, and remove packages, 
+What prt\-get basically does is build, install/upgrade, and remove packages, using
-using pkgmk, pkgadd, and pkgrm. Additionally, you don't have be in the port's
+pkgmk, pkgadd, and pkgrm. Additionally, you don't have be in the port's
-directory to call prt-get. prt-get will search for the respective port
+directory to call prt\-get. prt\-get will search for the respective port
-itself in a list of directories specified in /etc/prt-get.conf. This
+itself in a list of directories specified in /etc/prt\-get.conf. This
 allows you to just install or update a package, without caring where
 it actually is located on your file system.
 
 .PP 
 
-prt-get also lets you search for ports by name,
+prt\-get also lets you search for ports by name,
 find information about ports (without installing them of course),
 or print the dependencies of a port (as a space- or newline-separated list, 
 or a formatted tree). Note that dependencies are no
@@ -59,91 +59,109 @@ requirement for crux packages and therefore not always accurate.
 
 .PP 
 
-prt-get has a test mode so you can see what effect an install/update
+prt\-get has a test mode so you can see what effect an install/update
-operation would have. Use the --test switch for this (more details in
+operation would have. Use the \-\-test switch for this (more details in
 the \fBOPTIONS\fP section below).
 
 .SH "RETURN VALUE"
-prt-get returns 0 on success and a non-zero value otherwise (exact
+prt\-get returns 0 on success and a non-zero value otherwise (exact
 value -> meaning mapping to be determined...)
 
 .SH "COMMANDS"
-prt-get uses so-called commands, which always have to be the first 
+prt\-get uses so\-called commands, which always have to be the first 
 non-option argument passed. This is very similar to
 .B cvs(1).
 [command] can be one of the following:
 
 
 .TP 
-.B install [\-\-margs] [\-\-aargs] [\-\-log] [\-\-nodeps] [\-\-softdeps] <package1> [<package2> ...]
+.B install [\-\-margs] [\-\-aargs] [\-\-log] <package1> [<package2> ...]
-Install or update the packages given on the command line. Note that you can do 
+Install all packages in the listed order. Note that you can do this
-this from any directory. Pass the --nodeps flag to prevent \fBprt\-get\fP from
+from any directory.
-resolving dependencies and injecting any needed packages into the list of targets.
-Pass the --softdeps flag if you want the dependency resolver to also consider
-the "Optional" relationships among the packages given on the command line.
 
 .TP 
 .B depinst [\-\-margs] [\-\-aargs] [\-\-log] [\-\-softdeps] <package1> [<package2> ...]
-Basically a synonym for install (without the --nodeps flag).
+Install all packages given on the command line, including their dependencies.
+Note that already-installed packages will be left at their current version,
+even if out of date. prt\-get depinst behaves this way because all of its
+child pkgadd processes will \fBlack\fP the \-u flag, which is needed when
+updating an already-installed package.
+
+Passing the --softdeps flag tells \fBprt-get\fP to consider also the optional 
+dependencies when sorting. The --softdeps flag does NOT affect the
+calculation of the minimal set of packages needed to satisfy the
+transaction; only hard dependencies are used when constructing this set. But
+if there are any optional dependency relationships among the ports in the
+resulting set, they will be respected when prt-get determines the sequence
+in which to build.
 
 .TP 
-.B update [\-\-margs] [\-\-aargs]  [\-\-log] [\-\-softdeps] <package1> [<package2> ...]
+.B update [\-\-margs] [\-\-aargs]  [\-\-log] <package1> [<package2> ...]
-Basically a synonym for install. Earlier versions of \fBprt\-get\fP did not 
+Update all packages listed in this order. Note: if the latest version of a
-adjust the \fBpkgadd(8)\fP arguments on a package-by-package basis, but
+package has acquired dependencies that were not needed by the
-applied "install mode" or "update mode" to the entire transaction. This 
+currently-installed version and are not present on the system, the update
-version of \fBprt\-get\fP interprets the install command less rigidly, and tries 
+command will not attempt to resolve this omission. prt-get update behaves
-to sync all affected ports with their repository versions unless instructed 
+this way because pkgadd invocations inherit the flag -u for every package in
-otherwise (using \fBprt\-get lock\fP, the --prefer-higher option, or the 
+the transaction, causing an error if the package is not already installed.
-prt-get.aliases file).
+You can follow the CRUX mailing list or the IRC channels to stay informed of
+the situations where an update will require manual intervention, or filter
+the output of
+.B prt\-get quickdep $(prt\-get quickdiff)
+through \fBprt\-get isinst\fP to get a list of packages suitable for an 
+\fBinstall\fP or \fBupdate\fP command.
+See the \fBEXAMPLES\fP section below for details.
 
 .TP 
 .B remove <package1> [<package2> ...]
 Remove packages listed in this order
 
 .TP 
-.B sysup [\-\-softdeps] [\-\-nodeps] [\-\-prefer\-higher] [\-\-strict\-diff]
+.B sysup [\-\-softdeps] [\-\-nodeps]
 Update all installed packages which are outdated. Sorts by hard dependencies
 by default. Passing the --softdeps switch tells \fBprt\-get\fP to also consider
 optional dependencies when sorting. Passing the --nodeps switch tells prt-get 
-not to sort by dependencies at all.
+not to sort by dependencies at all, for approximately the same effect as
-
+.B prt\-get update $(prt\-get quickdiff).
-.B Note:
+As with an \fBupdate\fP command, the child \fBpkgadd\fP processes will 
-If a port has acquired new dependencies since its last successful build,
+inherit the \-u flag, so if a port has acquired new dependencies since 
-those new dependencies \fIwill\fP be injected into the transaction. An elegant
+its last successful build, those new dependencies will be omitted from 
-description of this new behaviour is "prt-get no more silently assumes that
+the transaction (unless they happen to be installed for some other reason and
-the user didn't want a particular dependency" [1]. You can still disable the
+are also in need of an update). See the \fBEXAMPLES\fP section for a way to
-automatic dependency injection by passing the --nodeps switch. Other
+automate the resolution of such omissions. Also see the
-ways to fine-tune the selection of ports that are included in a \fBsysup\fP are the
+.B lock
-commands \fBlock\fP and \fBunlock\fP, the prt-get.aliases file, and the
+and
-mutually exclusive switches --prefer-higher, --strict-diff (documented below).
+.B unlock
-
+commands to keep the currently installed versions, even if there are
-[1] https://lists.crux.nu/pipermail/crux/2008-June/001784.html
+changes in the ports tree. If you want to update only diffs which have
+a lower version installed than the one in the ports tree, use the
+--prefer-higher option.
 
 .TP 
 .B lock <package1> [<package2>...]
-Exclude these packages from being updated in a
+Do not update these packages in a
 .B sysup
-operation.
+operation
 
 .TP 
 .B unlock <package1> [<package2>...] 
 Remove lock from these packages
 
 .TP 
-.B listlocked [\-v|\-vv]
+.B listlocked [-v|-vv]
 List names of packages which are locked. As always,
-.B \-v
+.B -v
 will additionally show the version, and
-.B \-vv
+.B -vv
 also includes the description from the Pkgfile. Note that the
-.B \-vv
+.B -vv
 switch will slow down the operation remarkably.
 
 .TP 
 .B diff [\-\-all] [\-\-prefer\-higher] [<package1> <package2> ...]
 Show differences between installed packages and ports in the ports
-tree. Package names passed as argument will truncate the output to 
+tree. If arguments are given, shows only differences for these
-show only those packages. It's also possible to use shell-like
+packages, otherwise all differences are shown. It's also possible to use
+shell-like
 .B wildcards
 for the diff command. Make sure you escape where needed. Locked
 packages are only displayed if you use the --all switch. If you want
@@ -151,14 +169,20 @@ to see only diffs which have a lower version installed than the one in
 the ports tree, use the --prefer-higher option.
 
 .TP 
-.B quickdiff [\-\-prefer\-higher]
+.B quickdiff
 Print a simple list of packages which have a different version in the
 ports tree than what is installed. The output is sorted alphabetically, 
 but you can generate a (larger) list sorted by dependencies using
 .B prt\-get quickdep $(prt\-get quickdiff).
+Note that the resulting list is usually a mix of installed and 
+not-installed packages, so it must be filtered by
+.B prt\-get isinst
+before being passed as argument to prt\-get install or prt\-get update. See the
+.B EXAMPLES
+section below.
 
-If you want to see only diffs which have a lower version installed than
+If you want to see only diffs which have a lower version installed than the one in
-the one in the ports tree, use the --prefer-higher option.
+the ports tree, use the --prefer-higher option.
 
 .TP 
 .B search [\-v|\-vv] [\-\-path] [\-\-regex] <expr>
@@ -171,19 +195,20 @@ in their name
 Search the ports tree (both name and description) for the pattern
 .B expr
 (which can be a shell-like wildcard pattern or a regexp). The search in
-the description is not case sensitive. Note that this requires prt-get
+the description is not case sensitive. Note that this requires prt\-get
-to read every Pkgfile, which makes it rather slow; if you like searching
+to read every Pkgfile, which makes it rather slow. If you like searching by
-by description, consider using the cache functionality, so you only have to 
+description, consider using the cache functionality, so you only have to
-read every Pkgfile when the ports tree is updated.
+read all the Pkgfiles after each update of the ports tree.
 
 .TP 
 .B fsearch [\-\-full] [\-\-regex] <pattern>
 Search the ports tree for
 .B pattern
 as file name in their footprint. When called without '--full', strips
-the directories from the file names before matching. Pattern can be a 
+the directories from the file names before matching. 
-shell-like wildcard pattern (e.g. prt-get fsearch "*.h") or a regular
+Pattern can be a shell-like wildcard pattern (e.g. prt-get fsearch "*.h") 
-expression (e.g. prt-get fsearch --regex 'liblz(o2|ma).*')
+or a regular expression (e.g. prt-get fsearch --regex 'liblz(o2|ma).*')
+
 
 .TP 
 .B info <port>
@@ -199,22 +224,22 @@ Print the port's README file if it exists; if set, uses $PAGER
 
 .TP 
 .B depends [\-\-softdeps] <package1> [<package2> ...]
-Print a recursive list of dependencies needed to install the packages passed
+Print a recursive list of dependencies needed to install the packages
-as argument. It shows a list of the dependencies that were found in the 
+passed as argument. It shows a list of the dependencies that were found in
-ports tree, plus a list of the dependencies that could not be found. Pass 
+the ports tree, plus a list of the dependencies that could not be found.
-the --softdeps flag if you want the sorting algorithm to consider 
+Pass the --softdeps flag if you want the sorting algorithm to consider
 optional dependencies too.
 
 .TP 
 .B quickdep [\-\-softdeps] <package1> [<package2> ...]
-Same output as \fBdepends\fP, but separated by spaces rather than newlines, and
+Same output as \fBdepends\fP, but separated by spaces rather than newlines,
-stripped of any dependencies that could not be found in the ports tree.
+and stripped of any dependencies that could not be found in the ports tree.
-Useful in case the list of dependencies is too large to fit on one screen, or
+Useful in case the list of dependencies is too large to fit on one screen,
-if you don't want to filter out manually the ports that are invalid targets for
+or if you don't want to filter out manually the ports that are invalid
-installation. For example, instead of
+targets for installation. For example, instead of
 .B prt\-get depinst xorg-server
 you might micromanage the process as follows:
-.B for i in $(prt\-get quickdep xorg-server); do prt\-get install \-fr \-\-nodeps $i; done
+.B for i in $(prt\-get quickdep xorg-server); do if prt\-get isinst $i 2>/dev/null; then prt\-get update \-fr $i; else prt\-get install $i; fi; done
 which ensures that the latest version of each dependency is built.
 
 Note: It might be useful to run
@@ -226,29 +251,30 @@ for successful builds.
 .B deptree [\-\-softdeps] <package>
 Print a tree of the dependencies of the package
 .B <package>. 
-Pass the --softdeps flag to also show the installed packages that might have been
+Pass the --softdeps flag to also show the installed packages that might
-eagerly linked when
+have been eagerly linked, if they were present when
 .B <package>
-or its dependencies were compiled.
+(or its dependencies) were built.
 Subtrees already shown are marked with '-->' to save some space. In
 order to show them all, add the --all switch.
 
 .SH ""
 
 .TP 
-.B dependent [\-\-recursive] [\-\-softdeps] [\-\-all] <package>
+.B dependent [\-\-recursive] [\-\-softdeps] [\-\-all] [\-\-tree] <package>
 Print a list of ports whose "Depends on:" line contains
 .B <package>
-(or its dependents, if --recursive is passed). Use the --softdeps flag to also
+(or its dependents, if --recursive was passed). Use the --softdeps flag to
-search the "Optional:" lines for \fB<package>\fP .
+also search the "Optional:" lines for \fB<package>\fP.
  
-By default, output is restricted to ports that are installed. To see all the 
+By default, output is restricted to ports that are installed. To see all
-dependencies, add the --all switch. Use --tree to get a nicely indented list.
+the dependencies, use the --all switch. Use --tree to get a nicely indented
+list.
 
 .TP 
-.B dup [\-v] [format]
+.B dup [-v] [format]
 List ports which can be found in multiple directories configured in
-\fB/etc/prt\-get.conf\fP.
+.B /etc/prt-get.conf
 Use the \fB\-v\fP switch to see a verbose report, which will show for each
 dup the port that takes precedence, and the port that is hidden (including
 full path and version info). The verbose switch is basically an alias for a
@@ -265,19 +291,19 @@ symbols will be replaced as follows.
 
 .TP 
 \ \ \ \(bu
-%p1 -> full path (including name) to port taking precedence
+%p1 -> Full path (including name) to port taking precedence
 
 .TP 
 \ \ \ \(bu
-%p2 -> full path (including name) to port being hidden
+%p2 -> Full path (including name) to port being hidden
 
 .TP 
 \ \ \ \(bu
-%v1 -> version of port taking precedence
+%v1 -> Version of port taking precedence
 
 .TP
 \ \ \ \(bu
-%v2 -> version of port being hidden
+%v2 -> Version of port being hidden
 
 .TP 
 \ \ \ \(bu
@@ -307,7 +333,7 @@ for the list command. Make sure you escape where needed
 
 .TP 
 .B printf <format string1> [\-\-sort=<format string2>] [\-\-filter=<filter>]
-Print formatted port list. Format string can contain variables, which
+Print formatted port list format string can contain variables, which
 are replaced like this:
 .TP 
 \ \ \ \(bu
@@ -343,11 +369,11 @@ are replaced like this:
 
 .TP 
 \ \ \ \(bu
-%M -> maintainer
+%M -> Maintainer
 
 .TP 
 \ \ \ \(bu
-%R -> readme ("yes"/"no")
+%R -> Readme ("yes"/"no")
 
 .TP 
 \ \ \ \(bu
@@ -367,8 +393,8 @@ are replaced like this:
 up to date and "diff" if it's installed and a new version is in the
 ports tree.
 
-Use "\en" and "\et" to format your output (no additional format codes
+Use "\\n" and "\\t" to format your output (no additional format symbols
-supported). The optional format string2 can contain the same variables
+suported). The optional format string2 can contain the same variables
 as format string1 and is used to sort the output. You can specify a
 .B wildcard filter
 to filter by package name.
@@ -399,8 +425,8 @@ Output appears alphabetically separated by newlines, making it suitable for
 process substitution as shown in the
 .B EXAMPLES
 section below. Note that some core ports might be runtime
-dependencies despite their absence in the "Depends on:" line; 
+dependencies despite their absence in the "Depends on:" line; see \fBPkgfile(5)\fP
-see \fBPkgfile(5)\fP for an explanation of this practice. 
+for an explanation of this practice. 
 
 .TP 
 .B isinst <package1> [<package2> ...]
@@ -413,24 +439,28 @@ but does not print the version information. This command has a return value of
 greater than 0.
 
 .TP
-.B current <package1> [<package2> ...]
+.B current <package>
-Shows the currently-installed version of <package>, or a message
+Show the currently-installed version of <package>, or a message
-that <package> is not installed.
+that <package> is not installed. Unlike
+.B prt\-get isinst package1 package2,
+this command does \fBnot\fP accept more than one package as argument. Use
+.B pkginfo \-i| grep \-E '^(package1|package2|...)'
+to work around this limitation.
 
 .TP
 .B ls [\-\-path] <package>
-Print out a listing of the port's directory
+List the contents of the port's directory
 
 .TP
 .B cat <package> [<file>]
-Print to stdout (or $PAGER, if set) the contents of <file> in the port's
+Print the file to stdout. If <file> is not specified, 'Pkgfile' is used. If set, uses $PAGER.
-directory. If <file> is not specified, 'Pkgfile' is used.
 
 .TP
 .B edit <package> [<file>]
 Edit the file using the editor specified in the $EDITOR environment variable.
 If <file> is not specified, 'Pkgfile' is used.
 
+
 .TP 
 .B help
 Show a help screen
@@ -465,6 +495,14 @@ Force install; Implies 'pkgadd -f'; same as --aargs=-f
 .B \-fr
 Force rebuild, Implies 'pkgmk -f'; same as --margs=-f
 
+.TP
+.B \-um
+Update md5sum, implies 'pkgmk -um'; same as --margs=-um
+
+.TP
+.B \-im
+Ignore md5sum, implies 'pkgmk -im'; same as --margs=-im
+
 .TP
 .B \-us
 Update signature, implies 'pkgmk -us'; same as --margs=-us
@@ -507,15 +545,10 @@ future uses and consistency reasons
 .B \-\-ignore=<package1,package2,...>
 Don't install these packages, even if they're listed as dependencies
 
-.TP
-.B \-\-nodeps
-Leave the list of requested packages as-is, without sorting by dependencies
-or injecting missing dependencies.
-
 .TP
 .B \-\-softdeps
 Consider optional dependencies when determining the order in which to build
-the packages passed as arguments (in \fBinstall\fP or \fBsysup\fP operations).
+the packages passed as arguments (in a \fBdepinst\fP or \fBsysup\fP operation).
 Also affects the output of \fBdeptree\fP, \fBdependent\fP, and \fBlistorphans\fP.
 
 .TP 
@@ -524,20 +557,20 @@ Use cache file for this command
 
 .TP 
 .B \-\-test
-Dry run, don't actually install anything. Mostly interesting for
+Dry run, don't actually install anything, mostly interesting for
 .B prt\-get install, prt\-get update, prt\-get sysup
 
 .TP 
-.B \-\-pre\-install
+.B \-\-pre-install
 Execute pre-install script if it's there
 
 .TP 
-.B \-\-post\-install
+.B \-\-post-install
 Execute post-install script if it's there
 
 .TP 
-.B \-\-install\-scripts
+.B \-\-install-scripts
-Execute pre-install and post-install script if they're there.
+Execute pre-install and post-install script if they're there
 
 The options --pre-install, --post-install, and --install-scripts offer a
 convenient way to temporarily override the prt-get.conf directive 'runscripts
@@ -548,17 +581,18 @@ no\(dq, or point prt-get to an alternative configuration file using
 --config=<file>. (see below for the documentation of these options)
 
 .TP
-.B \-\-install\-root=<dir>
+.B \-\-install-root=<dir>
 Use <dir> as root directory for your installation; allows you to install 
 the requested packages onto a different directory than '/'. In daily usage, 
 this option is not required; it's primarily interesting if you're developing 
 an independent installation.
 
-Pre- and post-install scripts will not be executed if the requested 
+Pre- and post-install scripts will not be executed if the target root directory
-root directory lacks a copy of the ports tree. So if you're maintaining an
+lacks a copy of the ports tree. So if you're maintaining an installation on a
-installation mounted somewhere different than '/', it's not enough to put
+volume mounted somewhere other than '/', it's not enough to have the 
-the line 'runscripts yes' in your prt-get.conf; you also have to ensure that the
+line 'runscripts yes' in your prt-get.conf; you also have to ensure that
-pre- and post-install scripts can be found in the same location relative to <dir>.
+the pre- and post-install scripts can be found in the same location
+relative to <dir>.
 
 The setting for --install-root determines which package database is used for 
 reading/writing (so <dir>/var/lib/pkg/db must exist), and where the pkg.tar.?z 
@@ -577,15 +611,15 @@ unpacks it into <dir>.
 When setting --install-root=<dir>, install or update commands might behave
 unexpectedly if <dir>/etc/pkgadd.conf exists and is different from
 /etc/pkgadd.conf . In order to preserve the \fBpkgadd.conf(5)\fP settings from
-host system, append the option --aargs='-c /etc/pkgadd.conf' to your \fBprt\-get
+the host system, append the option --aargs='-c /etc/pkgadd.conf' to your
-install\fP command, or just copy the desired directives into
+\fBprt-get install\fP command, or just copy the desired directives into
 <dir>/etc/pkgadd.conf .
 
 .TP 
 .B \-\-log
 Write build output to log file. Basically a convenient alias for
 \fB\-\-config\-set=\(dqwritelog enabled\(dq\fP. Note that there is no similar
-alias allowing you to temporarily override the configuration directive
+alias allowing you to temporarily override the one configuration directive
 \(dqwritelog enabled\(dq; you have to resort to \fB\-\-config\-set=\(dqwritelog
 disabled\(dq\fP if that is your intention.
 
@@ -617,9 +651,8 @@ transactions as well.
 
 .TP 
 .B \-v, \-vv
-(verbosity level) Show version of a port (-v), or show both version
+(verbosity level) Show version of a port (\-v), or show both version
-and description (-vv). Passing more than one of these options is equivalent 
+and description (\-vv). Passing more than one of these options is equivalent to \-vv.
-to -vv.
 
 .TP
 .B \-\-path
@@ -644,49 +677,29 @@ Override the 'preferhigher' configuration option. Equivalent to
 
 .SH "CONFIGURATION"
 .TP 
-See man prt-get.conf(5)
+See man prt\-get.conf(5)
 
 .SH "EXAMPLES"
 .TP 
 .B prt\-get install irssi
-Download, build and install irssi (and any of its missing dependencies), with
+Download, build and install irssi, with one simple command
-one simple command
 
 .TP 
-.B prt\-get install --nodeps jasper
+.B prt\-get install paper yasm
-Install jasper, without trying to resolve dependencies.
+Install paper and yasm. Abort with an informative error message if either
-
+package is already installed, allowing you to issue a revised command.
-.TP
-.B prt\-get update --softdeps webkitgtk
-Get the latest version of webkitgtk, rebuilding any of its outdated dependencies
-(hard and soft) in the optimal order.
 
 .TP 
-.B prt\-get update -fr openssh
+.B prt\-get update \-fr openssh
-Update your current version of openssh, forcing a rebuild even if no version 
+Update your current version of openssh, forcing a rebuild even if no version difference is detected.
-difference is detected.
+Useful if there was a major version change in one of its dependencies, and \fBrevdep openssh\fP
-Useful if there was a major soversion change in one of its dependencies, 
+indicates a broken package. :\-)
-and \fBrevdep openssh\fP indicates a broken package. :-)
 
 .TP
 .B MISSLIBS=$(revdep \-vvv mpv | awk \-v FS=: '/(missing library)/ {print $3}'); [ \-n \(dq${MISSLIBS[@]}\(dq ] && for i in ${MISSLIBS[@]}; do prt\-get fsearch $i; done
 (adapted from a script by ppetrov^) Check for the presence of the runtime libraries needed by mpv.
 If any are absent, search the footprints to determine which ports provide the missing libraries.
 
-.TP
-.B prt\-get isinst $(ls /usr/pkgmk/packages/*.tar.gz | sed 's/.*\e///; s/#.*//;') | awk '/not installed/ { print $2 }'
-Determine whether there are any packages (in a shared output directory) that
-have since been uninstalled, or were never installed after a successful run
-of \fBpkgmk\fP.
-
-.TP
-.B prt\-get printf '%i:%p:%n\en' | awk \-v FS=: '/^diff:\e/usr\e/ports\e/core/ { print $3 }' | xargs prt\-get update
-Basically a \fBsysup\fP operation, but restricted to the core collection.
-Because core ports are often omitted from the dependency line if they aren't
-dynamically linked in, the \fBsysup\fP sorting algorithm might not put them
-at the front of the queue. Run this command before a regular \fBsysup\fP in
-order to ensure that core ports are updated first.
-
 .TP
 .B prt\-get isinst $(prt\-get info ffmpeg | awk \-v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}') | awk \-v FS=\(dq \(dq '/not installed/ {print $2}'
 Show all the optional dependencies of ffmpeg that are not currently installed.
@@ -700,17 +713,16 @@ spend any resources on ffmpeg until all of its optional dependencies are in
 place.
 
 .TP
-.B prt\-get isinst $(if grep \-qE '^ffmpeg:' /etc/prt\-get.softdeps 2>/dev/null; then grep \-E '^ffmpeg:' /etc/prt\-get.softdeps | cut \-d: \-f2 | tr ',' ' '; else prt-get info ffmpeg | awk \-v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}'; fi) | awk \-v FS=\(dq \(dq '/not installed/ {print $2}' | xargs prt\-get depinst \-\-group \-\-softdeps ffmpeg
+.B prt\-get isinst $(if grep \-qE '^ffmpeg:' /etc/prt\-get.softdeps 2>/dev/null; then grep \-E '^ffmpeg:' /etc/prt\-get.softdeps | cut \-d: \-f2 | tr ',' ' '; else prt\-get info ffmpeg | awk \-v FS=: '/^Optional/ {gsub(/,/,\(dq \(dq,$2); print $2}'; fi) | awk \-v FS=\(dq \(dq '/not installed/ {print $2}' | xargs prt\-get depinst \-\-group \-\-softdeps ffmpeg
 Extension of the above (addressing a use case envisioned by ivandi). The
 user can create the file /etc/prt-get.softdeps containing a line like
 .B ffmpeg: x264 x265
-and then the above command will perform a depinst --group operation to
+and then the above command will perform a depinst --group operation to ensure that
-ensure that at least x264 and x265 (but not necessarily any of the other
+at least x264 and x265 (but not necessarily any of the other optional
-optional dependencies) are present before trying to build ffmpeg. In the
+dependencies) are present before trying to build ffmpeg. In the absence of such
-absence of such a .softdeps config, the operation reverts to the behaviour
+a .softdeps config, the operation reverts to the behaviour of the preceding
-of the preceding example (maximal feature set). Implementing Gentoo USE
+example (maximal feature set). Implementing Gentoo USE flags with such an
-flags with such an awkward one-liner might draw criticism from advocates of
+awkward one-liner might draw criticism from advocates of the KISS principle.
-the KISS principle.
 
 .TP 
 .B prt\-get search \-\-regex '^(m|n|p)c.*'
@@ -721,29 +733,32 @@ Return a list of all ports whose names start with "mc", "nc", or "pc"
 Return a list of all ports having "irc" in their name or description
 
 .TP
-.B comm -13 <(ls /usr/ports/core) <(prt-get listorphans)
+.B prt\-get fsearch \-\-full \(dq/usr/etc/*\(dq | awk '/^Found in/ { $0=gensub(/Found in .*\e/(.+):/,\(dq\e\e1\(dq,\(dqg\(dq); print;}'
+Return a list of all ports that store their configs in /usr/etc. Omit the
+pipe to awk if you also want a detailed list of the files that matched.
+
+.TP
+.B comm \-13 <(ls /usr/ports/core) <(prt\-get listorphans)
 (based on comments from Romster and jue) Filter out the core ports from the list of orphans, in
 shells (like bash) that support process substitution
 
 .TP
-.B comm -13 <(cat ~/.keepers <(ls /usr/ports/core) | sort) <(prt\-get listorphans) | xargs prt\-get remove
+.B comm \-13 <(cat ~/.keepers <(ls /usr/ports/core) | sort) <(prt\-get listorphans) | xargs prt\-get remove
 (system-hosing extension of the above) A one-liner inspired by \fBpkg\-clean\fP
-and \fBpkgfoster\fP, but without the safeguard of interactivity.
+and \fBpkgfoster\fP, but without the safeguard of interactivity. \fBDo not try this on a
-\fBDo not try this on a mission-critical system.\fP
+mission-critical system.\fP
 
 .TP
 .B prt\-get isinst $(prt\-get quickdep $(prt\-get quickdiff)) | awk '/not installed/ {print $2}'
-(adapted from a comment by Fun) After updating your ports tree, print out a 
+(adapted from a comment by Fun) After updating your ports tree, print out a list of dependencies
-list of dependencies that were not needed the last time you built your 
+that were not needed the last time you built your currently-installed ports, but are needed now by
-currently-installed ports, but are needed now by the newer versions of 
+the newer versions of these ports. The output of this command is sorted by dependencies, therefore
-these ports. The output of this command is sorted by dependencies, therefore
 suitable for piping to \fBxargs prt\-get install\fP.
 
-.TP 
+.TP
-.B comm \-13 <(prt\-get depends firefox\-bin |tail \-n +2 |sort) <(prt\-get depends firefox |tail \-n +2 |sort)
+.B prt\-get isinst $(prt\-get quickdep $(prt\-get quickdiff)) | awk '/is installed/ {print $2}'
-Find the build-time dependencies of firefox. Runtime dependencies would 
+Same as above, but only print the dependencies that are already installed. The output of this
-also appear in the list generated by the first process substitution, and 
+command is suitable for piping to \fBxargs prt\-get update\fP.
-\fBcomm \-13\fP will suppress what the two lists have in common.
 
 .TP
 .B prt\-get isinst $(prt\-get quickdep i3) | awk '/not installed/ { print $2 }' | xargs prt\-get depinst \-\-softdeps \-\-test
@@ -754,17 +769,13 @@ awk filter in the middle is needed to prevent the command from failing with the
 error message "already installed".
 
 .TP
-.B prt\-get printf \(dq%p\et%u\en\(dq | grep myrepo | cut \-f 2
+.B comm \-3 <(prt\-get printf \(dq%i:%n %v\-%r\en\(dq | grep \-v ^no | cut \-d: \-f2 | sort) <(pkginfo \-i | sort)
-Print the upstream URL for each port in the collection \(dqmyrepo\(dq, 
+(inspired by a bug report from teodor) an alternative to \fBprt\-get diff\fP.
-perhaps as the first step in keeping your personal overlay up to date.
+In the output, left-justified lines show the version available in the
-
+repositories, while indented lines show the version installed. On a
-.TP
+reasonably up-to-date system, the two processes in the above command will
-.B for u in $(prt\-get printf \(dq%M:%p/%n\en\(dq | grep \-i ^unmaintained | cut \-d: \-f2); do cd ${u%/*}; printf \(dq||%s ||\(dq ${u##*/}; git log ${u##*/} | head \-n 5 | awk '/^Date/ { $0=gensub(/^Date:\es+/,"","g"); printf(\(dq %s ||\en\(dq,$0); }'; cd \- >/dev/null; done
+return many identical lines; these are suppressed by the -3 flag to
-Generate a table of unmaintained ports and the dates of their most recent
+\fBcomm(1)\fP.
-commit, in PmWiki syntax (left-justified port names, centered dates).
-Requires that your repositories are synchronized using the \fBgit(1)\fP driver.
-Subsequent sorting by date may be done using \fBsort(1)\fP with the flags
--k, -M, and -n (the appropriate key defs will depend on your locale).
 
 .TP
 .B for L in /var/log/pkgbuild/*.log; do P=${L%__*}; P=${P##*/}; VR=${L##*__}; VR=${VR%.log}; if ! prt\-get isinst $P >/dev/null; then mv $L /var/log/uninstalled/; elif [ \(dq$(prt\-get current $P)\(dq != \(dq$VR\(dq ]; then mv $L /var/log/oldbuild/; fi; done
@@ -776,21 +787,37 @@ on declaring \(dqlogfile /var/log/pkgbuild/%n__%v-%r.log\(dq and \(dqwritelog
 enabled\(dq in \fBprt\-get.conf(5)\fP. Logs saved with a different filename
 pattern will require slight adjustments to the command.
 
+.TP
+.B prt\-get printf \(dq%p\et%u\en\(dq | awk '($1 ~ /\e/myrepo$/) { print $2 }'
+Print the upstream URL for each port in the collection \(dqmyrepo\(dq, perhaps 
+as the first step in keeping your personal overlay up to date.
+
+.TP
+.B prt\-get printf \(dq%M\et%n\en\(dq | grep \-c ^Tim
+Count how many ports our most-overworked core team member claims responsibility for.
+
+.TP
+.B for u in $(prt\-get printf \(dq%M:%p/%n\en\(dq | grep \-i ^unmaintained | cut \-d: \-f2); do cd ${u%/*}; printf \(dq||%s ||\(dq ${u##*/}; git log ${u##*/} | head \-n 5 | awk '/^Date/ { $0=gensub(/^Date:\es+/,"","g"); printf(\(dq %s ||\en\(dq,$0); }'; cd \- >/dev/null; done
+Generate a table of unmaintained ports and the dates of their most recent
+commit, in PmWiki syntax (left-justified port names, centered dates).
+Requires that your repositories are synchronized using the \fBgit(1)\fP driver.
+Subsequent sorting by date may be done using \fBsort(1)\fP with the flags
+-k, -M, and -n (the appropriate key defs will depend on your locale).
+
 .TP
 .B prt\-get listinst \-\-depsort | xargs prt\-get install \-\-install\-root=/mnt
 Sort the list of installed packages by dependencies, and then install all
-those packages onto a backup filesystem (mounted at /mnt). If you have a 
+those packages onto a backup filesystem (mounted at /mnt). If you have a customized
-customized pkgadd.conf that you want applied to this operation, either copy 
+pkgadd.conf that you want applied to this operation, either copy it to 
-it to /mnt/etc where pkgadd will be looking for it, or pass the additional 
+/mnt/etc where pkgadd will be looking for it, or pass the additional option \-\-aargs=\(dq\-c
-option \-\-aargs=\(dq\-c /etc/pkgadd.conf\(dq to the install command.
+/etc/pkgadd.conf\(dq to the install command.
 
 .TP
 .B  prt\-get list \-\-path \-\-regex '^xorg.*' | grep \-v \(dq/usr/ports/xorg\(dq
-Show the ports whose names begin with xorg, but which appear outside the 
+Show the ports whose names begin with xorg, but which appear outside the xorg port collection.
-xorg port collection.
 (At the time of writing, this command returned at least two font ports.)
 
 .SH "AUTHORS"
 Johannes Winkelmann <jw@tks6.net>, and others cited inline
 .SH "SEE ALSO"
-prt-get.conf(5), prt-cache(8), Pkgfile(5), pkgmk(8), pkgadd(8), ports(8)
+prt\-get.conf(5), prt\-cache(8), Pkgfile(5), pkgmk(8), pkgadd(8), ports(8)

doc/prt-get.conf.5

@@ -128,36 +128,35 @@ replaced with the port's path, e.g. for port gcc in core, %p would be
 and %n would be
 .B gcc.
 This allows you to have separate log files per port.
-Separate log files for each version and release can be achieved using
+Separate log files for each version and release can be achieved
-the placeholders %v and %r, respectively. But if you want to enable
+using the placeholders %v and %r, respectively. But if you want to 
-\fBrmlog_on_uninst\fP, it is best to avoid %p, %v, and %r when 
+enable \fBrmlog_on_uninst\fP, it is best to avoid %p, %v, and %r 
-specifying \fBlogfile\fP (as explained below).
+when specifying \fBlogfile\fP (as explained below).
 
 .B rmlog_on_uninst
-can be set to 'yes' or 'no'; when set to yes, uninstalling a package
+which can be set to 'yes' or 'no'; when set to yes, uninstalling a 
-will also try to delete its build log. Replacements in the template
+package will also try to delete its build log. Replacements in the template 
-\fBlogfile\fP will be made using the \fIcurrent values\fP from the
+\fBlogfile\fP will be made using the \fIcurrent values\fP from the database
-database of installed packages, and from the active repositories. If
+of installed packages, and from the active repositories. If log files exist
-log files exist with different values of %p, %v, or %r than what the
+with different values of %p, %v, or %r than what the database and repositories
-database and repositories provide, then the pattern substitutions will 
+provide, then the pattern substitutions will fail to match the names of those
-fail to match the names of those logs, and this feature will be a no-op.
+logs, and this feature will be a no-op. For example, suppose you specify 
-For example, suppose you specify the logfile pattern 
+the logfile pattern \(dq%p/.buildlogs/%n-%v-%r.log\(dq, and you have a package
-\(dq%p/.buildlogs/%n__%v-%r.log\(dq, and you have a package installed
+installed on your system through many versions, or after it has been
-on your system through many versions, or after it has been moved from
+moved from opt to contrib. Uninstalling that package would leave behind all the
-opt to contrib. Uninstalling that package would leave behind all the 
+build logs except the latest. This pattern is also fragile with respect to
-build logs except the latest. This pattern is also fragile with respect
+repository purges; if one of your installed ports is dropped from the official
-to repository purges; if one of your installed ports is dropped from
+repos, then either \(dq%p\(dq will expand to the path of your personal overlay
-the official repos, then either \(dq%p\(dq will expand to the path of 
+(you did make a copy, right?), or it will not expand at all! See the EXAMPLES 
-your personal overlay (you did make a copy, right?), or it will not 
+section of \fBprt\-get(8)\fP for an alternative way to tidy up your directory
-expand at all! See the EXAMPLES section of \fBprt\-get(8)\fP for 
+of build logs.
-alternative ways to tidy up your directory of build logs.
 
 .B readme
-can be set to 'disabled', to suppress the notification after installing 
+can be set to 'disabled', to suppress the notification after
-a port with a README file; 'compact', to collect all the READMEs
+installing a port with a README file; 'compact', to collect all the READMEs
 into one post-transaction output; or 'verbose', to print separate
 information about each port with a README file. See
-.B prt\-get(8)
+.B prt-get(8)
 and especially the readme command how to read those README files using
 prt-get.
 

misc/Makefile.am

@@ -0,0 +1,4 @@
+EXTRA_DIST = prt-get_complete prt-get.aliases prt-get.deplist prt-get.conf
+
+sysconf_DATA = prt-get.conf
+

misc/Makefile.in

@@ -0,0 +1,403 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+subdir = misc
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(top_srcdir)/mkinstalldirs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+SOURCES =
+DIST_SOURCES =
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`;
+am__vpath_adj = case $$p in \
+    $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \
+    *) f=$$p;; \
+  esac;
+am__strip_dir = f=`echo $$p | sed -e 's|^.*/||'`;
+am__install_max = 40
+am__nobase_strip_setup = \
+  srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*|]/\\\\&/g'`
+am__nobase_strip = \
+  for p in $$list; do echo "$$p"; done | sed -e "s|$$srcdirstrip/||"
+am__nobase_list = $(am__nobase_strip_setup); \
+  for p in $$list; do echo "$$p $$p"; done | \
+  sed "s| $$srcdirstrip/| |;"' / .*\//!s/ .*/ ./; s,\( .*\)/[^/]*$$,\1,' | \
+  $(AWK) 'BEGIN { files["."] = "" } { files[$$2] = files[$$2] " " $$1; \
+    if (++n[$$2] == $(am__install_max)) \
+      { print $$2, files[$$2]; n[$$2] = 0; files[$$2] = "" } } \
+    END { for (dir in files) print dir, files[dir] }'
+am__base_list = \
+  sed '$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;$$!N;s/\n/ /g' | \
+  sed '$$!N;$$!N;$$!N;$$!N;s/\n/ /g'
+am__uninstall_files_from_dir = { \
+  test -z "$$files" \
+    || { test ! -d "$$dir" && test ! -f "$$dir" && test ! -r "$$dir"; } \
+    || { echo " ( cd '$$dir' && rm -f" $$files ")"; \
+         $(am__cd) "$$dir" && rm -f $$files; }; \
+  }
+am__installdirs = "$(DESTDIR)$(sysconfdir)"
+DATA = $(sysconf_DATA)
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+EXTRA_DIST = prt-get_complete prt-get.aliases prt-get.deplist prt-get.conf
+sysconf_DATA = prt-get.conf
+all: all-am
+
+.SUFFIXES:
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu misc/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu misc/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-sysconfDATA: $(sysconf_DATA)
+	@$(NORMAL_INSTALL)
+	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(sysconfdir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(sysconfdir)" || exit 1; \
+	fi; \
+	for p in $$list; do \
+	  if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \
+	  echo "$$d$$p"; \
+	done | $(am__base_list) | \
+	while read files; do \
+	  echo " $(INSTALL_DATA) $$files '$(DESTDIR)$(sysconfdir)'"; \
+	  $(INSTALL_DATA) $$files "$(DESTDIR)$(sysconfdir)" || exit $$?; \
+	done
+
+uninstall-sysconfDATA:
+	@$(NORMAL_UNINSTALL)
+	@list='$(sysconf_DATA)'; test -n "$(sysconfdir)" || list=; \
+	files=`for p in $$list; do echo $$p; done | sed -e 's|^.*/||'`; \
+	dir='$(DESTDIR)$(sysconfdir)'; $(am__uninstall_files_from_dir)
+tags: TAGS
+TAGS:
+
+ctags: CTAGS
+CTAGS:
+
+cscope cscopelist:
+
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(DATA)
+installdirs:
+	for dir in "$(DESTDIR)$(sysconfdir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -f Makefile
+distclean-am: clean-am distclean-generic
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-sysconfDATA
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-sysconfDATA
+
+.MAKE: install-am install-strip
+
+.PHONY: all all-am check check-am clean clean-generic distclean \
+	distclean-generic distdir dvi dvi-am html html-am info info-am \
+	install install-am install-data install-data-am install-dvi \
+	install-dvi-am install-exec install-exec-am install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip install-sysconfDATA installcheck installcheck-am \
+	installdirs maintainer-clean maintainer-clean-generic \
+	mostlyclean mostlyclean-generic pdf pdf-am ps ps-am uninstall \
+	uninstall-am uninstall-sysconfDATA
+
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

misc/prt-get.conf

@@ -17,7 +17,8 @@ prtdir /usr/ports/opt
 ### log options:
 # writelog enabled         # (enabled|disabled)
 # logmode  overwrite       # (append|overwrite)
-# rm_on_success no         # (yes|no)
+# rmlog_on_success no      # (yes|no)
+# rmlog_on_uninst no       # (yes|no)
 logfile  /var/log/pkgbuild/%n.log
                            # path, %p=path to port dir, %n=port name
                            #       %v=version, %r=release

src/Makefile.am

@@ -0,0 +1,29 @@
+# Makefile.am for prt-get by Johannes Winkelmann
+
+install-exec-local: install-binPROGRAMS
+	(cd $(DESTDIR)$(bindir); ln -sf prt-get prt-cache)
+
+bin_PROGRAMS=prt-get
+
+prt_get_SOURCES= argparser.cpp argparser.h\
+                 depresolver.cpp depresolver.h \
+                 installtransaction.cpp installtransaction.h \
+                 main.cpp \
+                 package.cpp package.h \
+                 pkgdb.cpp pkgdb.h \
+                 prtget.cpp prtget.h \
+                 repository.cpp repository.h \
+                 stringhelper.cpp stringhelper.h \
+                 process.cpp process.h \
+                 configuration.cpp configuration.h \
+                 signaldispatcher.cpp signaldispatcher.h \
+                 lockfile.cpp lockfile.h \
+                 file.cpp file.h \
+                 locker.cpp locker.h \
+		 versioncomparator.cpp versioncomparator.h \
+		 datafileparser.cpp datafileparser.h \
+		 pg_regex.cpp pg_regex.h
+
+
+AM_CPPFLAGS = -DSYSCONFDIR=\"$(sysconfdir)\" \
+	      -DLOCALSTATEDIR=\"$(localstatedir)\"

src/Makefile.in

@@ -0,0 +1,552 @@
+# Makefile.in generated by automake 1.12.2 from Makefile.am.
+# @configure_input@
+
+# Copyright (C) 1994-2012 Free Software Foundation, Inc.
+
+# This Makefile.in is free software; the Free Software Foundation
+# gives unlimited permission to copy and/or distribute it,
+# with or without modifications, as long as this notice is preserved.
+
+# This program is distributed in the hope that it will be useful,
+# but WITHOUT ANY WARRANTY, to the extent permitted by law; without
+# even the implied warranty of MERCHANTABILITY or FITNESS FOR A
+# PARTICULAR PURPOSE.
+
+@SET_MAKE@
+
+# Makefile.am for prt-get by Johannes Winkelmann
+
+VPATH = @srcdir@
+am__make_dryrun = \
+  { \
+    am__dry=no; \
+    case $$MAKEFLAGS in \
+      *\\[\ \	]*) \
+        echo 'am--echo: ; @echo "AM"  OK' | $(MAKE) -f - 2>/dev/null \
+          | grep '^AM OK$$' >/dev/null || am__dry=yes;; \
+      *) \
+        for am__flg in $$MAKEFLAGS; do \
+          case $$am__flg in \
+            *=*|--*) ;; \
+            *n*) am__dry=yes; break;; \
+          esac; \
+        done;; \
+    esac; \
+    test $$am__dry = yes; \
+  }
+pkgdatadir = $(datadir)/@PACKAGE@
+pkgincludedir = $(includedir)/@PACKAGE@
+pkglibdir = $(libdir)/@PACKAGE@
+pkglibexecdir = $(libexecdir)/@PACKAGE@
+am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd
+install_sh_DATA = $(install_sh) -c -m 644
+install_sh_PROGRAM = $(install_sh) -c
+install_sh_SCRIPT = $(install_sh) -c
+INSTALL_HEADER = $(INSTALL_DATA)
+transform = $(program_transform_name)
+NORMAL_INSTALL = :
+PRE_INSTALL = :
+POST_INSTALL = :
+NORMAL_UNINSTALL = :
+PRE_UNINSTALL = :
+POST_UNINSTALL = :
+bin_PROGRAMS = prt-get$(EXEEXT)
+subdir = src
+DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in \
+	$(top_srcdir)/depcomp $(top_srcdir)/mkinstalldirs
+ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
+am__aclocal_m4_deps = $(top_srcdir)/configure.in
+am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \
+	$(ACLOCAL_M4)
+mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs
+CONFIG_HEADER = $(top_builddir)/config.h
+CONFIG_CLEAN_FILES =
+CONFIG_CLEAN_VPATH_FILES =
+am__installdirs = "$(DESTDIR)$(bindir)"
+PROGRAMS = $(bin_PROGRAMS)
+am_prt_get_OBJECTS = argparser.$(OBJEXT) depresolver.$(OBJEXT) \
+	installtransaction.$(OBJEXT) main.$(OBJEXT) package.$(OBJEXT) \
+	pkgdb.$(OBJEXT) prtget.$(OBJEXT) repository.$(OBJEXT) \
+	stringhelper.$(OBJEXT) process.$(OBJEXT) \
+	configuration.$(OBJEXT) signaldispatcher.$(OBJEXT) \
+	lockfile.$(OBJEXT) file.$(OBJEXT) locker.$(OBJEXT) \
+	versioncomparator.$(OBJEXT) datafileparser.$(OBJEXT) \
+	pg_regex.$(OBJEXT)
+prt_get_OBJECTS = $(am_prt_get_OBJECTS)
+prt_get_LDADD = $(LDADD)
+DEFAULT_INCLUDES = -I.@am__isrc@ -I$(top_builddir)
+depcomp = $(SHELL) $(top_srcdir)/depcomp
+am__depfiles_maybe = depfiles
+am__mv = mv -f
+CXXCOMPILE = $(CXX) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) \
+	$(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CXXFLAGS) $(CXXFLAGS)
+CXXLD = $(CXX)
+CXXLINK = $(CXXLD) $(AM_CXXFLAGS) $(CXXFLAGS) $(AM_LDFLAGS) $(LDFLAGS) \
+	-o $@
+COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \
+	$(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS)
+CCLD = $(CC)
+LINK = $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(AM_LDFLAGS) $(LDFLAGS) -o $@
+SOURCES = $(prt_get_SOURCES)
+DIST_SOURCES = $(prt_get_SOURCES)
+am__can_run_installinfo = \
+  case $$AM_UPDATE_INFO_DIR in \
+    n|no|NO) false;; \
+    *) (install-info --version) >/dev/null 2>&1;; \
+  esac
+ETAGS = etags
+CTAGS = ctags
+DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST)
+ACLOCAL = @ACLOCAL@
+AMTAR = @AMTAR@
+AUTOCONF = @AUTOCONF@
+AUTOHEADER = @AUTOHEADER@
+AUTOMAKE = @AUTOMAKE@
+AWK = @AWK@
+CC = @CC@
+CCDEPMODE = @CCDEPMODE@
+CFLAGS = @CFLAGS@
+CPP = @CPP@
+CPPFLAGS = @CPPFLAGS@
+CXX = @CXX@
+CXXDEPMODE = @CXXDEPMODE@
+CXXFLAGS = @CXXFLAGS@
+CYGPATH_W = @CYGPATH_W@
+DEFS = @DEFS@
+DEPDIR = @DEPDIR@
+ECHO_C = @ECHO_C@
+ECHO_N = @ECHO_N@
+ECHO_T = @ECHO_T@
+EGREP = @EGREP@
+EXEEXT = @EXEEXT@
+GREP = @GREP@
+INSTALL = @INSTALL@
+INSTALL_DATA = @INSTALL_DATA@
+INSTALL_PROGRAM = @INSTALL_PROGRAM@
+INSTALL_SCRIPT = @INSTALL_SCRIPT@
+INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@
+LDFLAGS = @LDFLAGS@
+LIBOBJS = @LIBOBJS@
+LIBS = @LIBS@
+LTLIBOBJS = @LTLIBOBJS@
+MAKEINFO = @MAKEINFO@
+MKDIR_P = @MKDIR_P@
+OBJEXT = @OBJEXT@
+PACKAGE = @PACKAGE@
+PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@
+PACKAGE_NAME = @PACKAGE_NAME@
+PACKAGE_STRING = @PACKAGE_STRING@
+PACKAGE_TARNAME = @PACKAGE_TARNAME@
+PACKAGE_URL = @PACKAGE_URL@
+PACKAGE_VERSION = @PACKAGE_VERSION@
+PATH_SEPARATOR = @PATH_SEPARATOR@
+SET_MAKE = @SET_MAKE@
+SHELL = @SHELL@
+STRIP = @STRIP@
+VERSION = @VERSION@
+abs_builddir = @abs_builddir@
+abs_srcdir = @abs_srcdir@
+abs_top_builddir = @abs_top_builddir@
+abs_top_srcdir = @abs_top_srcdir@
+ac_ct_CC = @ac_ct_CC@
+ac_ct_CXX = @ac_ct_CXX@
+am__include = @am__include@
+am__leading_dot = @am__leading_dot@
+am__quote = @am__quote@
+am__tar = @am__tar@
+am__untar = @am__untar@
+bindir = @bindir@
+build_alias = @build_alias@
+builddir = @builddir@
+datadir = @datadir@
+datarootdir = @datarootdir@
+docdir = @docdir@
+dvidir = @dvidir@
+exec_prefix = @exec_prefix@
+host_alias = @host_alias@
+htmldir = @htmldir@
+includedir = @includedir@
+infodir = @infodir@
+install_sh = @install_sh@
+libdir = @libdir@
+libexecdir = @libexecdir@
+localedir = @localedir@
+localstatedir = @localstatedir@
+mandir = @mandir@
+mkdir_p = @mkdir_p@
+oldincludedir = @oldincludedir@
+pdfdir = @pdfdir@
+prefix = @prefix@
+program_transform_name = @program_transform_name@
+psdir = @psdir@
+sbindir = @sbindir@
+sharedstatedir = @sharedstatedir@
+srcdir = @srcdir@
+sysconfdir = @sysconfdir@
+target_alias = @target_alias@
+top_build_prefix = @top_build_prefix@
+top_builddir = @top_builddir@
+top_srcdir = @top_srcdir@
+prt_get_SOURCES = argparser.cpp argparser.h\
+                 depresolver.cpp depresolver.h \
+                 installtransaction.cpp installtransaction.h \
+                 main.cpp \
+                 package.cpp package.h \
+                 pkgdb.cpp pkgdb.h \
+                 prtget.cpp prtget.h \
+                 repository.cpp repository.h \
+                 stringhelper.cpp stringhelper.h \
+                 process.cpp process.h \
+                 configuration.cpp configuration.h \
+                 signaldispatcher.cpp signaldispatcher.h \
+                 lockfile.cpp lockfile.h \
+                 file.cpp file.h \
+                 locker.cpp locker.h \
+		 versioncomparator.cpp versioncomparator.h \
+		 datafileparser.cpp datafileparser.h \
+		 pg_regex.cpp pg_regex.h
+
+AM_CPPFLAGS = -DSYSCONFDIR=\"$(sysconfdir)\" \
+	      -DLOCALSTATEDIR=\"$(localstatedir)\"
+
+all: all-am
+
+.SUFFIXES:
+.SUFFIXES: .cpp .o .obj
+$(srcdir)/Makefile.in:  $(srcdir)/Makefile.am  $(am__configure_deps)
+	@for dep in $?; do \
+	  case '$(am__configure_deps)' in \
+	    *$$dep*) \
+	      ( cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ) \
+	        && { if test -f $@; then exit 0; else break; fi; }; \
+	      exit 1;; \
+	  esac; \
+	done; \
+	echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \
+	$(am__cd) $(top_srcdir) && \
+	  $(AUTOMAKE) --gnu src/Makefile
+.PRECIOUS: Makefile
+Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
+	@case '$?' in \
+	  *config.status*) \
+	    cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \
+	  *) \
+	    echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \
+	    cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \
+	esac;
+
+$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+
+$(top_srcdir)/configure:  $(am__configure_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(ACLOCAL_M4):  $(am__aclocal_m4_deps)
+	cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh
+$(am__aclocal_m4_deps):
+install-binPROGRAMS: $(bin_PROGRAMS)
+	@$(NORMAL_INSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	if test -n "$$list"; then \
+	  echo " $(MKDIR_P) '$(DESTDIR)$(bindir)'"; \
+	  $(MKDIR_P) "$(DESTDIR)$(bindir)" || exit 1; \
+	fi; \
+	for p in $$list; do echo "$$p $$p"; done | \
+	sed 's/$(EXEEXT)$$//' | \
+	while read p p1; do if test -f $$p; \
+	  then echo "$$p"; echo "$$p"; else :; fi; \
+	done | \
+	sed -e 'p;s,.*/,,;n;h' -e 's|.*|.|' \
+	    -e 'p;x;s,.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/' | \
+	sed 'N;N;N;s,\n, ,g' | \
+	$(AWK) 'BEGIN { files["."] = ""; dirs["."] = 1 } \
+	  { d=$$3; if (dirs[d] != 1) { print "d", d; dirs[d] = 1 } \
+	    if ($$2 == $$4) files[d] = files[d] " " $$1; \
+	    else { print "f", $$3 "/" $$4, $$1; } } \
+	  END { for (d in files) print "f", d, files[d] }' | \
+	while read type dir files; do \
+	    if test "$$dir" = .; then dir=; else dir=/$$dir; fi; \
+	    test -z "$$files" || { \
+	      echo " $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files '$(DESTDIR)$(bindir)$$dir'"; \
+	      $(INSTALL_PROGRAM_ENV) $(INSTALL_PROGRAM) $$files "$(DESTDIR)$(bindir)$$dir" || exit $$?; \
+	    } \
+	; done
+
+uninstall-binPROGRAMS:
+	@$(NORMAL_UNINSTALL)
+	@list='$(bin_PROGRAMS)'; test -n "$(bindir)" || list=; \
+	files=`for p in $$list; do echo "$$p"; done | \
+	  sed -e 'h;s,^.*/,,;s/$(EXEEXT)$$//;$(transform)' \
+	      -e 's/$$/$(EXEEXT)/' `; \
+	test -n "$$list" || exit 0; \
+	echo " ( cd '$(DESTDIR)$(bindir)' && rm -f" $$files ")"; \
+	cd "$(DESTDIR)$(bindir)" && rm -f $$files
+
+clean-binPROGRAMS:
+	-test -z "$(bin_PROGRAMS)" || rm -f $(bin_PROGRAMS)
+prt-get$(EXEEXT): $(prt_get_OBJECTS) $(prt_get_DEPENDENCIES) $(EXTRA_prt_get_DEPENDENCIES) 
+	@rm -f prt-get$(EXEEXT)
+	$(CXXLINK) $(prt_get_OBJECTS) $(prt_get_LDADD) $(LIBS)
+
+mostlyclean-compile:
+	-rm -f *.$(OBJEXT)
+
+distclean-compile:
+	-rm -f *.tab.c
+
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/argparser.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/configuration.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/datafileparser.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/depresolver.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/file.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/installtransaction.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/locker.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/lockfile.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/main.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/package.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pg_regex.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/pkgdb.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/process.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/prtget.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/repository.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/signaldispatcher.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/stringhelper.Po@am__quote@
+@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/versioncomparator.Po@am__quote@
+
+.cpp.o:
+@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ $<
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ $<
+
+.cpp.obj:
+@am__fastdepCXX_TRUE@	$(CXXCOMPILE) -MT $@ -MD -MP -MF $(DEPDIR)/$*.Tpo -c -o $@ `$(CYGPATH_W) '$<'`
+@am__fastdepCXX_TRUE@	$(am__mv) $(DEPDIR)/$*.Tpo $(DEPDIR)/$*.Po
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	source='$<' object='$@' libtool=no @AMDEPBACKSLASH@
+@AMDEP_TRUE@@am__fastdepCXX_FALSE@	DEPDIR=$(DEPDIR) $(CXXDEPMODE) $(depcomp) @AMDEPBACKSLASH@
+@am__fastdepCXX_FALSE@	$(CXXCOMPILE) -c -o $@ `$(CYGPATH_W) '$<'`
+
+ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES)
+	list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	mkid -fID $$unique
+tags: TAGS
+
+TAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	set x; \
+	here=`pwd`; \
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	shift; \
+	if test -z "$(ETAGS_ARGS)$$*$$unique"; then :; else \
+	  test -n "$$unique" || unique=$$empty_fix; \
+	  if test $$# -gt 0; then \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      "$$@" $$unique; \
+	  else \
+	    $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \
+	      $$unique; \
+	  fi; \
+	fi
+ctags: CTAGS
+CTAGS:  $(HEADERS) $(SOURCES)  $(TAGS_DEPENDENCIES) \
+		$(TAGS_FILES) $(LISP)
+	list='$(SOURCES) $(HEADERS)  $(LISP) $(TAGS_FILES)'; \
+	unique=`for i in $$list; do \
+	    if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \
+	  done | \
+	  $(AWK) '{ files[$$0] = 1; nonempty = 1; } \
+	      END { if (nonempty) { for (i in files) print i; }; }'`; \
+	test -z "$(CTAGS_ARGS)$$unique" \
+	  || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \
+	     $$unique
+
+GTAGS:
+	here=`$(am__cd) $(top_builddir) && pwd` \
+	  && $(am__cd) $(top_srcdir) \
+	  && gtags -i $(GTAGS_ARGS) "$$here"
+
+cscopelist:  $(HEADERS) $(SOURCES) $(LISP)
+	list='$(SOURCES) $(HEADERS) $(LISP)'; \
+	case "$(srcdir)" in \
+	  [\\/]* | ?:[\\/]*) sdir="$(srcdir)" ;; \
+	  *) sdir=$(subdir)/$(srcdir) ;; \
+	esac; \
+	for i in $$list; do \
+	  if test -f "$$i"; then \
+	    echo "$(subdir)/$$i"; \
+	  else \
+	    echo "$$sdir/$$i"; \
+	  fi; \
+	done >> $(top_builddir)/cscope.files
+
+distclean-tags:
+	-rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags
+
+distdir: $(DISTFILES)
+	@srcdirstrip=`echo "$(srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	topsrcdirstrip=`echo "$(top_srcdir)" | sed 's/[].[^$$\\*]/\\\\&/g'`; \
+	list='$(DISTFILES)'; \
+	  dist_files=`for file in $$list; do echo $$file; done | \
+	  sed -e "s|^$$srcdirstrip/||;t" \
+	      -e "s|^$$topsrcdirstrip/|$(top_builddir)/|;t"`; \
+	case $$dist_files in \
+	  */*) $(MKDIR_P) `echo "$$dist_files" | \
+			   sed '/\//!d;s|^|$(distdir)/|;s,/[^/]*$$,,' | \
+			   sort -u` ;; \
+	esac; \
+	for file in $$dist_files; do \
+	  if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \
+	  if test -d $$d/$$file; then \
+	    dir=`echo "/$$file" | sed -e 's,/[^/]*$$,,'`; \
+	    if test -d "$(distdir)/$$file"; then \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \
+	      cp -fpR $(srcdir)/$$file "$(distdir)$$dir" || exit 1; \
+	      find "$(distdir)/$$file" -type d ! -perm -700 -exec chmod u+rwx {} \;; \
+	    fi; \
+	    cp -fpR $$d/$$file "$(distdir)$$dir" || exit 1; \
+	  else \
+	    test -f "$(distdir)/$$file" \
+	    || cp -p $$d/$$file "$(distdir)/$$file" \
+	    || exit 1; \
+	  fi; \
+	done
+check-am: all-am
+check: check-am
+all-am: Makefile $(PROGRAMS)
+installdirs:
+	for dir in "$(DESTDIR)$(bindir)"; do \
+	  test -z "$$dir" || $(MKDIR_P) "$$dir"; \
+	done
+install: install-am
+install-exec: install-exec-am
+install-data: install-data-am
+uninstall: uninstall-am
+
+install-am: all-am
+	@$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am
+
+installcheck: installcheck-am
+install-strip:
+	if test -z '$(STRIP)'; then \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	      install; \
+	else \
+	  $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \
+	    install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \
+	    "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'" install; \
+	fi
+mostlyclean-generic:
+
+clean-generic:
+
+distclean-generic:
+	-test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES)
+	-test . = "$(srcdir)" || test -z "$(CONFIG_CLEAN_VPATH_FILES)" || rm -f $(CONFIG_CLEAN_VPATH_FILES)
+
+maintainer-clean-generic:
+	@echo "This command is intended for maintainers to use"
+	@echo "it deletes files that may require special tools to rebuild."
+clean: clean-am
+
+clean-am: clean-binPROGRAMS clean-generic mostlyclean-am
+
+distclean: distclean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+distclean-am: clean-am distclean-compile distclean-generic \
+	distclean-tags
+
+dvi: dvi-am
+
+dvi-am:
+
+html: html-am
+
+html-am:
+
+info: info-am
+
+info-am:
+
+install-data-am:
+
+install-dvi: install-dvi-am
+
+install-dvi-am:
+
+install-exec-am: install-binPROGRAMS install-exec-local
+
+install-html: install-html-am
+
+install-html-am:
+
+install-info: install-info-am
+
+install-info-am:
+
+install-man:
+
+install-pdf: install-pdf-am
+
+install-pdf-am:
+
+install-ps: install-ps-am
+
+install-ps-am:
+
+installcheck-am:
+
+maintainer-clean: maintainer-clean-am
+	-rm -rf ./$(DEPDIR)
+	-rm -f Makefile
+maintainer-clean-am: distclean-am maintainer-clean-generic
+
+mostlyclean: mostlyclean-am
+
+mostlyclean-am: mostlyclean-compile mostlyclean-generic
+
+pdf: pdf-am
+
+pdf-am:
+
+ps: ps-am
+
+ps-am:
+
+uninstall-am: uninstall-binPROGRAMS
+
+.MAKE: install-am install-strip
+
+.PHONY: CTAGS GTAGS all all-am check check-am clean clean-binPROGRAMS \
+	clean-generic cscopelist ctags distclean distclean-compile \
+	distclean-generic distclean-tags distdir dvi dvi-am html \
+	html-am info info-am install install-am install-binPROGRAMS \
+	install-data install-data-am install-dvi install-dvi-am \
+	install-exec install-exec-am install-exec-local install-html \
+	install-html-am install-info install-info-am install-man \
+	install-pdf install-pdf-am install-ps install-ps-am \
+	install-strip installcheck installcheck-am installdirs \
+	maintainer-clean maintainer-clean-generic mostlyclean \
+	mostlyclean-compile mostlyclean-generic pdf pdf-am ps ps-am \
+	tags uninstall uninstall-am uninstall-binPROGRAMS
+
+
+install-exec-local: install-binPROGRAMS
+	(cd $(DESTDIR)$(bindir); ln -sf prt-get prt-cache)
+
+# Tell versions [3.59,3.63) of GNU make to not export all variables.
+# Otherwise a system limit (for SysV at least) may be exceeded.
+.NOEXPORT:

src/argparser.cpp

@@ -27,28 +27,26 @@ ArgParser::ArgParser( int argc, char** argv )
       m_hasFilter( false ),
       m_noStdConfig( false ),
       m_writeLog( false ),
-      m_depSort( true ),
+      m_nodeps( false ),
       m_softdeps( false ),
-      m_revdep(false),
       m_all( false ),
       m_printPath( false ),
       m_execPreInstall( false ),
       m_execPostInstall( false ),
       m_preferHigher( false ),
       m_strictDiff( false ),
-      m_sysup( false ),
       m_group( false ),
       m_useRegex(false),
       m_fullPath(false),
-      m_quick(false),
       m_recursive(false),
       m_printTree(false),
+      m_depSort(false),
       m_alternateConfigFile( "" ),
       m_pkgmkArgs( "" ),
       m_pkgaddArgs( "" ),
       m_pkgrmArgs( "" ),
-      m_filter( "" ),
       m_sortArgs( "" ),
+      m_filter( "" ),
       m_commandName( "" ),
       m_unknownOption( "" ),
       m_installRoot( "" ),
@@ -82,7 +80,7 @@ bool ArgParser::isCommandGiven() const
 /*!
   \return a list of arguments not processed by ArgParser
 */
-const list<string>& ArgParser::otherArgs() const
+const list<char*>& ArgParser::otherArgs() const
 {
     return m_otherArgs;
 }
@@ -105,6 +103,7 @@ const string& ArgParser::pkgmkArgs() const
     return m_pkgmkArgs;
 }
 
+
 /*!
   \return addtional arguments to pkgadd
 */
@@ -113,6 +112,7 @@ const string& ArgParser::pkgaddArgs() const
     return m_pkgaddArgs;
 }
 
+
 /*!
   \return the name of the alternative configuration file
 */
@@ -121,34 +121,36 @@ const string& ArgParser::alternateConfigFile() const
     return m_alternateConfigFile;
 }
 
+
 /*!
   parse the arguments
   \return true on success
 */
-bool ArgParser::parse() {
+bool ArgParser::parse()
-    const int commandCount = 28;
+{
-    string commands[commandCount] = { "help", "info", "version",
+    const int commandCount = 34;
-                                      "search", "dsearch", "fsearch", 
+    string commands[commandCount] = { "list", "search", "dsearch",
-                                      "cache", "install", "remove",
+                                      "info", "version", "cache",
-                                      "current", "isinst", "diff",
+                                      "depends", "install", "depinst",
-                                      "path", "printf", "readme",
+                                      "help", "isinst", "dup", "update",
-                                      "list", "listinst", "listorphans", 
+                                      "quickdep", "diff", "quickdiff",
-                                      "lock", "unlock", "listlocked",
+                                      "path", "listinst", "printf", "readme",
-                                      "cat", "ls", "edit", "dumpconfig",
+                                      "dependent", "sysup", "current",
-                                      "dup", "depends", "deptree"
+                                      "fsearch", "lock", "unlock",
-                                      };
+                                      "listlocked", "cat", "ls", "edit",
-
+                                      "remove", "deptree", "dumpconfig",
-    Type commandID[commandCount] = { HELP, INFO, SHOW_VERSION, 
+                                      "listorphans" };
-	    			     SEARCH, DSEARCH, FSEARCH,
-                                     CREATE_CACHE, INSTALL, REMOVE,
-                                     CURRENT, ISINST, DIFF,
-                                     PATH, PRINTF, README,
-                                     LIST, LISTINST, LISTORPHANS,
-                                     LOCK, UNLOCK, LISTLOCKED,
-                                     CAT, LS, EDIT, DUMPCONFIG,
-                                     DUP, DEPENDS, DEPTREE
-                                     };
 
+    Type commandID[commandCount] = { LIST, SEARCH, DSEARCH, INFO,
+	    			     SHOW_VERSION, CREATE_CACHE,
+                                     DEPENDS, INSTALL, DEPINST,
+                                     HELP, ISINST, DUP, UPDATE,
+                                     QUICKDEP, DIFF, QUICKDIFF,
+                                     PATH, LISTINST, PRINTF, README,
+                                     DEPENDENT, SYSUP, CURRENT,
+                                     FSEARCH, LOCK, UNLOCK, LISTLOCKED,
+                                     CAT, LS, EDIT, REMOVE, DEPTREE,
+                                     DUMPCONFIG, LISTORPHANS };
     if ( m_argc < 2 ) {
         return false;
     }
@@ -168,42 +170,71 @@ bool ArgParser::parse() {
     for ( int i = 1; i < m_argc; ++i ) {
         if ( m_argv[i][0] == '-' ) {
             string s = m_argv[i];
-            if ( s == "-v" ) { m_verbose += 1;
+            if ( s == "-v" ) {
-            } else if ( s == "-vv" ) { m_verbose += 2;
+                m_verbose += 1;
-            } else if ( s == "--test" ) { m_isTest = true;
+            } else if ( s == "-vv" ) {
-            } else if ( s == "--cache" ) { m_useCache = true;
+                m_verbose += 2;
-            } else if ( s == "--depsort" ) { m_depSort = true;
+            } else if ( s == "--test" ) {
-            } else if ( s == "--nodeps" ) { m_depSort = false;
+                m_isTest = true;
-            } else if ( s == "--softdeps" ) { m_softdeps = true;
+            } else if ( s == "--cache" ) {
-            } else if ( s == "--all" ) { m_all = true;
+                m_useCache = true;
-            } else if ( s == "--path" ) { m_printPath = true;
+            } else if ( s == "--nodeps" ) {
-            } else if ( s == "--log" ) { m_writeLog = true;
+                m_nodeps = true;
-            } else if ( s == "--pre-install" ) { m_execPreInstall = true;
+            } else if ( s == "--softdeps" ) {
-            } else if ( s == "--post-install" ) { m_execPostInstall = true;
+                m_softdeps = true;
-            } else if ( s == "--install-scripts" ) { m_execPreInstall = true;
+            } else if ( s == "--all" ) {
+                m_all = true;
+            } else if ( s == "--path" ) {
+                m_printPath = true;
+            } else if ( s == "--log" ) {
+                m_writeLog = true;
+            } else if ( s == "--pre-install" ) {
+                m_execPreInstall = true;
+            } else if ( s == "--post-install" ) {
                 m_execPostInstall = true;
-            } else if ( s == "--no-std-config" ) { m_noStdConfig = true;
+            } else if ( s == "--install-scripts" ) {
+                m_execPreInstall = true;
+                m_execPostInstall = true;
+            } else if ( s == "--no-std-config" ) {
+                m_noStdConfig = true;
             } else if ( s == "--prefer-higher" || s == "-ph" ) {
                 m_preferHigher = true;
             } else if ( s == "--strict-diff" || s == "-sd" ) {
                 m_strictDiff = true;
-            } else if ( s == "--group" || s == "-g" ) { m_group = true;
+            } else if ( s == "--group" || s == "-g" ) {
-            } else if ( s == "--quick" || s == "-Q" ) { m_quick = true;
+                m_group = true;
-            } else if ( s == "--regex" ) { m_useRegex = true;
+            } else if ( s == "--regex" ) {
-            } else if ( s == "--full" ) { m_fullPath = true;
+                m_useRegex = true;
-            } else if ( s == "--recursive" || s == "-R" ) { m_recursive = true;
+            } else if ( s == "--full" ) {
-            } else if ( s == "--tree" || s == "-T" ) { m_printTree = true;
+                m_fullPath = true;
-            } else if ( s == "-f" )  { m_pkgaddArgs += " " + s;
+            } else if ( s == "--recursive" ) {
-            } else if ( s == "-fi" ) { m_pkgaddArgs += " -f";
+                m_recursive = true;
-            } else if ( s == "-fr" ) { m_pkgmkArgs += " -f";
+            } else if ( s == "--tree" ) {
-            } else if ( s == "-if" ) { m_pkgmkArgs += " " + s;
+                m_printTree = true;
-            } else if ( s == "-uf" ) { m_pkgmkArgs += " " + s;
+            } else if ( s == "--depsort" ) {
-            } else if ( s == "-im" ) { m_pkgmkArgs += " " + s;
+                m_depSort = true;
-            } else if ( s == "-um" ) { m_pkgmkArgs += " " + s;
+            } else if ( s == "-f" ) {
-            } else if ( s == "-is" ) { m_pkgmkArgs += " " + s;
+                m_pkgaddArgs += " " + s;
-            } else if ( s == "-us" ) { m_pkgmkArgs += " " + s;
+            } else if ( s == "-fr" ) {
-	    } else if ( s == "-kw" ) { m_pkgmkArgs += " " + s;
+                m_pkgmkArgs += " -f";
-            } else if ( s == "-ns" ) { m_pkgmkArgs += " " + s;
+            } else if ( s == "-if" ) {
+                m_pkgmkArgs += " " + s;
+            } else if ( s == "-uf" ) {
+                m_pkgmkArgs += " " + s;
+            } else if ( s == "-im" ) {
+                m_pkgmkArgs += " " + s;
+            } else if ( s == "-um" ) {
+                m_pkgmkArgs += " " + s;
+            } else if ( s == "-is" ) {
+                m_pkgmkArgs += " " + s;
+            } else if ( s == "-us" ) {
+                m_pkgmkArgs += " " + s;
+	    } else if ( s == "-kw" ) {
+                m_pkgmkArgs += " " + s;
+            } else if ( s == "-ns" ) {
+                m_pkgmkArgs += " " + s;
+            } else if ( s == "-fi" ) {
+                m_pkgaddArgs += " -f";
             }
 
             // substrings
@@ -213,11 +244,11 @@ bool ArgParser::parse() {
                 m_pkgaddArgs += " " + s.substr( 8 );
             } else if ( s.substr( 0, 8 ) == "--rargs=" ) {
                 m_pkgrmArgs = s.substr( 8 );
+            } else if ( s.substr( 0, 7 ) == "--sort=" ) {
+                m_sortArgs = s.substr( 7 );
             } else if ( s.substr( 0, 9 ) == "--filter=" ) {
                 m_filter = s.substr( 9 );
                 m_hasFilter = true;
-            } else if ( s.substr( 0, 7 ) == "--sort=" ) {
-                m_sortArgs = s.substr( 7 );
             } else if ( s.substr( 0, 9 ) == "--config=" ) {
                 m_alternateConfigFile = s.substr( 9 );
                 m_isAlternateConfigGiven = true;
@@ -240,45 +271,22 @@ bool ArgParser::parse() {
         } else {
             if (!m_isCommandGiven) {
                 string s = m_argv[i];
-		if ( s == "grpinst") {
+                m_commandName = s;
-			    m_isCommandGiven = true;
+                if ( s == "grpinst" ) {
-			    m_commandType = INSTALL;
+                    m_isCommandGiven = true;
-			    m_group = true;
+                    m_commandType = commandID[7];
-			    cout << "Warning: grpinst is obsolescent";
+                    m_group = true;
-			    cout << "; using install --group" << endl;
+                    cout << "Warning: grpinst is obsolescent";
-		} else if (s == "depinst") {
+                    cout << "; using install --group" << endl;
-			    m_isCommandGiven = true;
+                } else {
-			    m_commandType = INSTALL;
+                    for ( int i = 0; i < commandCount; ++i ) {
-			    m_depSort = true;
+                        if ( s == commands[i] ) {
-		} else if (s == "update") {
+                            m_isCommandGiven = true;
-			    m_isCommandGiven = true;
+                            m_commandType = commandID[i];
-			    m_commandType = INSTALL;
+                            break;
-		} else if (s == "sysup") {
+                        }
-			    m_isCommandGiven = true;
+                    }
-			    m_commandType = DIFF;
+                }
-			    m_sysup = true;
-		} else if (s == "quickdiff") {
-			    m_isCommandGiven = true;
-			    m_commandType = DIFF;
-			    m_quick = true;
-		} else if (s == "quickdep") {
-			    m_isCommandGiven = true;
-			    m_commandType = DEPENDS;
-			    m_quick = true;
-		} else if (s == "dependent") {
-			    m_isCommandGiven = true;
-			    m_commandType = DEPTREE;
-			    m_revdep = true;
-		} else {
-			for ( int i = 0; i < commandCount; ++i ) {
-			    if ( s == commands[i] ) {
-				    m_isCommandGiven = true;
-				    m_commandName = s;
-				    m_commandType = commandID[i];
-				    break;
-			    }
-			}
-		}
                 // first argument must be command
                 if ( !m_isCommandGiven ) {
                     return false;
@@ -289,9 +297,12 @@ bool ArgParser::parse() {
         }
     }
 
+
+
     return m_isCommandGiven;
 }
 
+
 /*!
   \return true whether --test has been specified
 */
@@ -300,6 +311,7 @@ bool ArgParser::isTest() const
     return m_isTest;
 }
 
+
 /*!
   \return the level of verbose: -v -> 1, -vv -> 2
 */
@@ -308,6 +320,7 @@ int ArgParser::verbose() const
     return m_verbose;
 }
 
+
 /*!
   \return whether --cache has been specified
 */
@@ -316,6 +329,7 @@ bool ArgParser::useCache() const
     return m_useCache;
 }
 
+
 /*!
   \return whether prt-get was called as 'prt-cache' or not
 */
@@ -332,6 +346,14 @@ bool ArgParser::writeLog() const
     return m_writeLog;
 }
 
+/*!
+  \return the --sort="..." string
+*/
+const string& ArgParser::sortArgs() const
+{
+    return m_sortArgs;
+}
+
 /*!
   \return whether there was a --filter argument
 */
@@ -340,6 +362,7 @@ bool ArgParser::hasFilter() const
     return m_hasFilter;
 }
 
+
 /*!
   \return whether there was a --no-std-config argument
  */
@@ -348,6 +371,7 @@ bool ArgParser::noStdConfig() const
     return m_noStdConfig;
 }
 
+
 /*!
   \return the --filter="..." string
 */
@@ -357,18 +381,16 @@ const string& ArgParser::filter() const
 }
 
 /*!
-  \return the --sort="..." string
+  \return whether there was a --nodeps argument
 */
-const string& ArgParser::sortArgs() const
+bool ArgParser::nodeps() const
 {
-    return m_sortArgs;
+    return m_nodeps;
-}
-
-bool ArgParser::depSort() const
-{
-    return m_depSort;
 }
 
+/*!
+  \return whether there was a --softdeps argument
+*/
 bool ArgParser::followSoftdeps() const
 {
     return m_softdeps;
@@ -387,16 +409,6 @@ bool ArgParser::printPath() const
     return m_printPath;
 }
 
-bool ArgParser::revdep() const
-{
-    return m_revdep;
-}
-
-bool ArgParser::quick() const
-{
-    return m_quick;
-}
-
 bool ArgParser::recursive() const
 {
     return m_recursive;
@@ -404,7 +416,12 @@ bool ArgParser::recursive() const
 
 bool ArgParser::printTree() const
 {
-    return (m_printTree || m_commandName == "deptree");
+    return m_printTree;
+}
+
+bool ArgParser::depSort() const
+{
+    return m_depSort;
 }
 
 const string& ArgParser::commandName() const
@@ -453,11 +470,6 @@ bool ArgParser::strictDiff() const
     return m_strictDiff;
 }
 
-bool ArgParser::sysup() const
-{
-    return m_sysup;
-}
-
 bool ArgParser::group() const
 {
     return m_group;
@@ -473,6 +485,7 @@ bool ArgParser::fullPath() const
     return m_fullPath;
 }
 
+
 const string& ArgParser::ignore() const
 {
     return m_ignore;

src/argparser.h

@@ -31,15 +31,14 @@ public:
     bool parse();
 
     /*! Command type */
-    enum Type { HELP, INFO, SHOW_VERSION, 
+    enum Type { HELP, LIST, SEARCH, DSEARCH, INSTALL, DEPINST,
-	        SEARCH, DSEARCH, FSEARCH,
+                INFO, DEPENDS, ISINST, DUP, UPDATE,
-                CREATE_CACHE, INSTALL, REMOVE,
+                QUICKDEP, DIFF, 
-                CURRENT, ISINST, DIFF,
+                QUICKDIFF, SHOW_VERSION, CREATE_CACHE, PATH,
-                PATH, PRINTF, README,
+                LISTINST, PRINTF, README, DEPENDENT, SYSUP,
-                LIST, LISTINST, LISTORPHANS,
+                CURRENT, FSEARCH, LOCK, UNLOCK, LISTLOCKED,
-                LOCK, UNLOCK, LISTLOCKED,
+                CAT, LS, EDIT, REMOVE,
-                CAT, LS, EDIT, DUMPCONFIG,
+                DEPTREE, DUMPCONFIG, LISTORPHANS };
-                DUP, DEPENDS, DEPTREE };
 
     bool isCommandGiven() const;
     bool isTest() const;
@@ -49,29 +48,27 @@ public:
     bool writeLog() const;
     bool hasFilter() const;
     bool noStdConfig() const;
-    bool depSort() const;
+    bool nodeps() const;
-    bool followSoftdeps() const;
     bool all() const;
     bool printPath() const;
     bool execPreInstall() const;
     bool execPostInstall() const;
     bool preferHigher() const;
     bool strictDiff() const;
-    bool sysup() const;
     bool group() const;
     bool useRegex() const;
     bool fullPath() const;
-    bool revdep() const;
-    bool quick() const;
     bool recursive() const;
     bool printTree() const;
+    bool depSort() const;
+    bool followSoftdeps() const;
 
     const string& alternateConfigFile() const;
     const string& pkgmkArgs() const;
     const string& pkgaddArgs() const;
     const string& pkgrmArgs() const;
-    const string& filter() const;
     const string& sortArgs() const;
+    const string& filter() const;
     const string& installRoot() const;
     const string& ignore() const;
 
@@ -81,7 +78,7 @@ public:
     const string& commandName() const;
     const string& unknownOption() const;
 
-    const list<string>& otherArgs() const;
+    const list<char*>& otherArgs() const;
 
     int verbose() const;
 
@@ -102,9 +99,8 @@ private:
 
     bool m_writeLog;
 
-    bool m_depSort;
+    bool m_nodeps;
     bool m_softdeps;
-    bool m_revdep;
 
     bool m_all;
     bool m_printPath;
@@ -113,21 +109,21 @@ private:
     bool m_execPostInstall;
     bool m_preferHigher;
     bool m_strictDiff;
-    bool m_sysup;
     bool m_group;
     bool m_useRegex;
     bool m_fullPath;
 
-    bool m_quick;
     bool m_recursive;
     bool m_printTree;
     
+    bool m_depSort;
+
     string m_alternateConfigFile;
     string m_pkgmkArgs;
     string m_pkgaddArgs;
     string m_pkgrmArgs;
-    string m_filter;
     string m_sortArgs;
+    string m_filter;
     string m_commandName;
     string m_unknownOption;
     string m_installRoot;
@@ -140,7 +136,7 @@ private:
 
     int m_verbose;
 
-    list<string> m_otherArgs;
+    list<char*> m_otherArgs;
 
     list< pair<char*, ConfigArgType> > m_configData;
 };

src/configuration.cpp

@@ -37,8 +37,7 @@ Configuration::Configuration( const std::string& configFile,
       m_useRegex( false ),
       m_followSoftdeps( false ),
       m_makeCommand( "" ), m_addCommand( "" ),
-      m_removeCommand( "" ), m_runscriptCommand( "" ),
+      m_removeCommand( "" ), m_runscriptCommand( "" )
-      m_compressionMode( "" ), m_packageDir( "" )
 {
 
 }
@@ -96,25 +95,6 @@ string Configuration::logFilePattern() const
     return m_logFilePattern;
 }
 
-string Configuration::packageDir() const
-{
-    string value = "";
-    char line[256];
-    string cmd = "eval " + m_packageDir + " && echo \"$PKGMK_PACKAGE_DIR\"";
-    FILE* p = popen(cmd.c_str(), "r");
-    if (p) {
-        fgets(line, 256, p);
-        value = StringHelper::stripWhiteSpace(line);
-        pclose(p);
-    }
-
-    return value;
-}
-
-string Configuration::compressionMode() const
-{
-    return ( m_compressionMode == "" ) ? "gz" : m_compressionMode;
-}
 
 const list< pair<string, string> >& Configuration::rootList() const
 {
@@ -176,6 +156,8 @@ void Configuration::parseLine(const string& line, bool prepend)
     } else if ( startsWithNoCase( s, "writelog" ) ) {
         s = stripWhiteSpace( s.replace( 0, 8, "" ) );
         if ( s == "enabled" ) {
+            // it's already set to false, so we can just enable it.
+            // like this, the command line switch works as well
             m_writeLog = true;
         } else if ( s == "disabled" ) {
 	    m_writeLog = false;
@@ -215,7 +197,7 @@ void Configuration::parseLine(const string& line, bool prepend)
             m_runScripts = true;
         } else if ( s == "no" ) {
 	    m_runScripts = false;
-        }
+	}
     } else if ( startsWithNoCase( s, "preferhigher" ) ) {
         s = stripWhiteSpace( s.replace( 0, 12, "" ) );
         if ( s == "yes" ) {
@@ -227,9 +209,7 @@ void Configuration::parseLine(const string& line, bool prepend)
         s = stripWhiteSpace( s.replace( 0, 8, "" ) );
         if ( s == "yes" ) {
             m_useRegex = true;
-        } else if ( s == "no" ) {
+        }
-	    m_useRegex = false;
-	}
     } else if ( startsWithNoCase( s, "softdeps" ) ) {
         s = stripWhiteSpace( s.replace( 0, 8, "" ) );
 	if ( s == "yes" ) {
@@ -248,32 +228,6 @@ void Configuration::parseLine(const string& line, bool prepend)
     }
 }
 
-bool Configuration::parsePkgmkConf(int readOrder)
-{
-    string fileName = (readOrder == 1) ? "/etc/pkgmk.conf" : "/usr/bin/pkgmk";
-    FILE* fp = fopen(fileName.c_str(), "r");
-    if (!fp)
-        return false;
-
-    string s;
-    char line[256];
-    while (fgets(line, 256, fp)) {
-        s = StringHelper::stripWhiteSpace(getValueBefore(line,'#'));
-        if ( StringHelper::startsWith(s, "PKGMK_COMPRESSION_MODE=") &&
-		(readOrder==1 || m_compressionMode == "") ) {
-                m_compressionMode = s.substr(23);
-		StringHelper::replaceAll(m_compressionMode,"\"","");
-		StringHelper::replaceAll(m_compressionMode,"'","");
-        } else if ( StringHelper::startsWith(s, "PKGMK_PACKAGE_DIR=") &&
-		(readOrder==1 || m_packageDir == "" ) ) {
-		m_packageDir = s;
-	}
-    }
-    fclose(fp);
-
-    return ( m_compressionMode != "" && m_packageDir != "" );
-}
-
 bool Configuration::runScripts() const
 {
     return m_runScripts;

src/configuration.h

@@ -46,8 +46,6 @@ public:
     bool useRegex() const;
     bool followSoftdeps() const;
 
-    bool parsePkgmkConf(int readOrder);
-
     void addConfig(const std::string& line,
                    bool configSet,
                    bool configPrepend);
@@ -57,9 +55,6 @@ public:
     std::string removeCommand() const;
     std::string runscriptCommand() const;
 
-    std::string compressionMode() const;
-    std::string packageDir() const;
-
 private:
     std::string m_configFile;
     const ArgParser* m_parser;
@@ -87,8 +82,6 @@ private:
     std::string m_removeCommand;
     std::string m_runscriptCommand;
 
-    std::string m_compressionMode;
-    std::string m_packageDir;
 
     void parseLine(const std::string& line, bool prepend=false);
 };

src/installtransaction.cpp

@@ -27,7 +27,6 @@ using namespace std;
 #include "pkgdb.h"
 #include "stringhelper.h"
 #include "argparser.h"
-#include "versioncomparator.h"
 #include "process.h"
 #include "configuration.h"
 
@@ -72,6 +71,38 @@ InstallTransaction::InstallTransaction( const list<string>& names,
 
 }
 
+/*!
+ Create a nice InstallTransaction
+ \param names a list of port names to be installed
+ \param repo the repository to look for packages
+ \param pkgDB the pkgDB with already installed packages
+*/
+InstallTransaction::InstallTransaction( const list<char*>& names,
+                                        const Repository* repo,
+                                        PkgDB* pkgDB,
+                                        const Configuration* config )
+    : m_pkgDB( pkgDB ),
+      m_resolver(),
+      m_repo( repo ),
+      m_depCalced( false ),
+      m_installedPackages(),
+      m_alreadyInstalledPackages(),
+      m_ignoredPackages(),
+      m_depNameList(),
+      m_depList(),
+      m_missingPackages(),
+      m_installErrors(),
+      m_config( config )
+{
+    list<char*>::const_iterator it = names.begin();
+    for ( ; it != names.end(); ++it ) {
+        m_packages.push_back( make_pair( *it, m_repo->getPackage( *it ) ) );
+    }
+
+}
+
+
+
 /*!
  Create a nice InstallTransaction
  \param names a list of port names to be installed
@@ -111,17 +142,17 @@ InstallTransaction::installError() const
 /*!
   install (commit) a transaction
   \param parser the argument parser
+  \param update whether this is an update operation
   \return returns an InstallResult telling whether installation worked
 */
 InstallTransaction::InstallResult
-InstallTransaction::install( const ArgParser* parser )
+InstallTransaction::install( const ArgParser* parser,
+                             bool update )
 {
     if ( m_packages.empty() ) {
         return NO_PACKAGE_GIVEN;
     }
 
-    bool update;
-    const string forceRebuild = "-fr";
     list<string> ignoredPackages;
     StringHelper::split(parser->ignore(), ',', ignoredPackages);
 
@@ -144,62 +175,45 @@ InstallTransaction::install( const ArgParser* parser )
             continue;
         }
 
-        // Set the update flag if the package is installed and out of date,
+        // consider aliases here, but don't show them specifically
-	//   or if the user has forced a rebuild.
+        if ( !update && m_pkgDB->isInstalled( package->name(), true ) ) {
-	// Proceed to the next target if package is installed and up to date,
+            // ignore
-	// or is provided by an alias.
+            m_alreadyInstalledPackages.push_back( package->name() );
-	if ( m_pkgDB->isInstalled( it->first, false ) ) {
+            continue;
-		VersionComparator::COMP_RESULT
+        }
-			rpDiff = VersionComparator::compareVersions(
-				m_repo->getPackageVersion( package->name() ),
-				m_pkgDB->getPackageVersion( package->name() ) );
-		if ( rpDiff == VersionComparator::EQUAL &&
-		   parser->pkgmkArgs().find(forceRebuild) == string::npos ) {
-			m_alreadyInstalledPackages.push_back( package->name() );
-			continue;
-		} else if ( (! m_config->preferHigher()) || parser->strictDiff() 
-			|| rpDiff == VersionComparator::GREATER 
-			|| ( parser->pkgmkArgs().find(forceRebuild) 
-			!= string::npos && find(parser->otherArgs().begin(), 
-			parser->otherArgs().end(), it->first)
-			!= parser->otherArgs().end() ) ) {
-			update = true;
-		} else {
-			continue;
-		}
-	} else if ( m_pkgDB->isInstalled( it->first, true ) ) {
-		continue;
-	}
-
 
         InstallTransaction::InstallResult result;
         InstallInfo info( package->hasReadme() );
         if ( parser->isTest() ) {
             info.preState = ( package->hasPreInstall() &&
-                (parser->execPreInstall() || m_config->runScripts())
+                 (parser->execPreInstall() || m_config->runScripts())
-			  ) ? DEFERRED : NONEXISTENT;
+			    ) ? DEFERRED : NONEXISTENT;
             info.postState = ( package->hasPostInstall() &&
-                (parser->execPostInstall() || m_config->runScripts())
+                 (parser->execPostInstall() || m_config->runScripts())
-			  ) ? DEFERRED : NONEXISTENT;
+			    ) ? DEFERRED : NONEXISTENT;
-            m_installedPackages.push_back( make_pair( package->path() + "/" + package->name(), info));
+            m_installedPackages.push_back( make_pair( package->path() 
-	    continue;
+				    + "/" + package->name(), info));
-	}
+            continue;
+        }
+	
         if ((result = installPackage( package, parser, update, info )) == SUCCESS) {
 
-            m_installedPackages.push_back( make_pair( package->path() + "/" + package->name(), info));
+            m_installedPackages.push_back( make_pair( package->path() 
+				    + "/" + package->name(), info));
         } else {
 
-            // log failures and pkgdest errors are critical,
+            // log failures are critical
-	    // don't proceed to the next install target if encountered
             if ( result == LOG_DIR_FAILURE ||
                  result == LOG_FILE_FAILURE ||
                  result == NO_LOG_FILE ||
                  result == CANT_LOCK_LOG_FILE ||
+
+                 // or pkgdest
                  result == PKGDEST_ERROR ) {
                 return result;
             }
 
-            m_installErrors.push_back( make_pair(package->path() + "/" + package->name(), info) );
+            m_installErrors.push_back( make_pair(package->name(), info) );
             if ( parser->group() ) {
                 return PKGMK_FAILURE;
             }
@@ -221,7 +235,8 @@ InstallTransaction::installPackage( const Package* package,
                                     const ArgParser* parser,
                                     bool update,
                                     InstallTransaction::InstallInfo& info )
-const {
+    const
+{
 
     InstallTransaction::InstallResult result = SUCCESS;
 #ifdef USE_LOCKING
@@ -237,7 +252,7 @@ const {
         commandName = "prt-cache";
     }
 
-    // - initial information about the package to be built
+    // - initial information about the package to be build
     string message;
     message = commandName + ": ";
     if (update) {
@@ -295,25 +310,23 @@ const {
         write( fdlog, timestamp.c_str(), timestamp.length());
     }
 
-    string portdir = package->path() + "/" + package->name();
+    string pkgdir = package->path() + "/" + package->name();
-    chdir( portdir.c_str() );
+    chdir( pkgdir.c_str() );
 
-    string runscriptCommand = "/bin/sh";
+    string runscriptCommand = "sh";
     if (m_config->runscriptCommand() != "") {
         runscriptCommand = m_config->runscriptCommand();
     }
     if (parser->installRoot() != "") {
-        runscriptCommand = "chroot " + parser->installRoot() + " "
+	runscriptCommand = "chroot " + parser->installRoot() + runscriptCommand;
-		+ runscriptCommand;
     }
 
     // -- pre-install
-    struct stat statData; struct stat fstatData;
+    struct stat statData;
     if ((parser->execPreInstall() || m_config->runScripts()) &&
-        stat((parser->installRoot() + portdir + "/pre-install").c_str(),
+        stat((parser->installRoot() + pkgdir + "/" + "pre-install").c_str(), &statData) == 0) {
-             &statData) == 0) {
         Process preProc( runscriptCommand,
-                         portdir + "/pre-install",
+                         pkgdir + "/" + "pre-install",
                          fdlog );
         if (preProc.executeShell()) {
             info.preState = FAILED;
@@ -323,39 +336,22 @@ const {
     }
 
     // -- build
-    string pkgdest = m_config->packageDir();
-    string builtPkg = package->name() + "#" + package->version() + "-" +
-	              package->release() + ".pkg.tar." + m_config->compressionMode();
-    string builtPkgPath = ( pkgdest != "" ) ? pkgdest + "/" + builtPkg :
-	                            portdir + "/" + builtPkg ;
     string cmd = PKGMK_DEFAULT_COMMAND;
     if (m_config->makeCommand() != "") {
         cmd = m_config->makeCommand();
     }
 
-    // skip the build if a package exists newer than Pkgfile
-    // (e.g., created by running pkgmk manually)
-    if ( stat(builtPkgPath.c_str(), &statData) +
-        stat((portdir + "/Pkgfile").c_str(), &fstatData) == 0) {
-	    time_t pkgMtime = statData.st_mtime;
-	    time_t pfMtime = fstatData.st_mtime;
-	    if ( ( difftime(pkgMtime,pfMtime) > 0 ) and 
-	    (parser->pkgmkArgs().find(" -f") == string::npos) ) { 
-		    cmd = "/bin/true"; }
-    }
-
     string args = "-d " + parser->pkgmkArgs();
-    if ( parser->pkgmkArgs().find(" -f") != string::npos &&
-         find( parser->otherArgs().begin(), parser->otherArgs().end(),
-		 package->name() ) == parser->otherArgs().end() ) {
-	    StringHelper::replaceAll(args," -f","");
-    }
     Process makeProc( cmd, args, fdlog );
     if ( makeProc.executeShell() ) {
         result = PKGMK_FAILURE;
     } else {
-        string message = ( pkgdest == "" ) ? "" :
+        // -- update
-		commandName + ": Using PKGMK_PACKAGE_DIR " + pkgdest;
+        string pkgdest = getPkgmkPackageDir();
+        if ( pkgdest != "" ) {
+            // TODO: don't manipulate pkgdir
+            pkgdir = pkgdest;
+            string message = "prt-get: Using PKGMK_PACKAGE_DIR: " + pkgdir;
             if (parser->verbose() > 0) {
                 cout << message << endl;
             }
@@ -363,79 +359,94 @@ const {
                 write( fdlog, message.c_str(), message.length() );
                 write( fdlog, "\n", 1 );
             }
-    }
-
-    // no need to chdir if we provide absolute paths to pkgadd
-    cmd = PKGADD_DEFAULT_COMMAND;
-    if (m_config->addCommand() != "") {
-        cmd = m_config->addCommand();
-    }
-
-    args = "";
-    if (parser->installRoot() != "") {
-        args = "-r " + parser->installRoot() + " ";
-    }
-
-    if ( update ) {
-        args += "-u ";
-    }
-    if ( !parser->pkgaddArgs().empty() ) {
-        args += parser->pkgaddArgs() + " ";
-    }
-    args += builtPkgPath;
-
-    // - inform the user about what's happening
-    string fullCommand = commandName + ": " + cmd + args;
-    string summary;
-    if (update) {
-        string from = m_pkgDB->getPackageVersion(package->name());
-        string to = m_repo->getPackageVersion(package->name());
-        if (from == to) {
-            summary = commandName + ": " + "reinstalling " +
-                package->name() + " " + to;
-        } else {
-            summary = commandName + ": " + "updating " +
-                package->name() + " from " + from + " to " + to;
         }
-    } else {
-        summary = commandName + ": " + "installing " + package->name() +
-		" " + package->version() + "-" + package->release();
-    }
 
-    // - print and log
+        // the following chdir is a noop if usePkgDest() returns false
-    cout << summary << endl;
+        if ( chdir( pkgdir.c_str() ) != 0 ) {
-    if (parser->verbose() > 0) {
+            result = PKGDEST_ERROR;
-        cout << fullCommand << endl;
+        } else {
-    }
+            cmd = PKGADD_DEFAULT_COMMAND;
-    if ( m_config->writeLog() ) {
+            if (m_config->addCommand() != "") {
-        time_t endTime;
+                cmd = m_config->addCommand();
-        time(&endTime);
+            }
-        timestamp = ctime(&endTime);
-        timestamp = commandName + ": build done " + timestamp;
 
-        write( fdlog, summary.c_str(), summary.length() );
+            args = "";
-        write( fdlog, "\n", 1 );
+            if (parser->installRoot() != "") {
-        write( fdlog, fullCommand.c_str(), fullCommand.length() );
+                args = "-r " + parser->installRoot() + " ";
-        write( fdlog, "\n", 1 );
+            }
-        write( fdlog, timestamp.c_str(), timestamp.length());
-        write( fdlog, "\n", 1 );
-    }
 
-    Process installProc( cmd, args, fdlog );
+
-    if ( installProc.executeShell() ) {
+            if ( update ) {
-        result = PKGADD_FAILURE;
+                args += "-u ";
-    } else {
+            }
-        // exec post install
+            if ( !parser->pkgaddArgs().empty() ) {
-        if ((parser->execPostInstall()  || m_config->runScripts() ) &&
+                args += parser->pkgaddArgs() + " ";
-            stat((parser->installRoot() + portdir + "/post-install").c_str(),
+            }
-                 &statData) == 0) {
+            args +=
-                Process postProc( runscriptCommand,
+                package->name()    + "#" +
-                                  portdir + "/post-install", fdlog );
+                package->version() + "-" +
-                if (postProc.executeShell()) {
+                package->release() + ".pkg.tar." + getPkgmkCompressionMode();
-                    info.postState = FAILED;
+
+
+            // - inform the user about what's happening
+            string fullCommand = commandName + ": " + cmd + " " + args;
+            string summary;
+            if (update) {
+                string from = m_pkgDB->getPackageVersion(package->name());
+                string to = package->version() + "-" + package->release();
+                if (from ==  to) {
+                    summary = commandName + ": " + "reinstalling " +
+                        package->name() + " " + to;
                 } else {
-                    info.postState = EXEC_SUCCESS;
+                    summary = commandName + ": " + "updating " +
+                        package->name() + " from " + from + " to " + to;
                 }
+            } else {
+                summary = commandName + ": " + "installing " +
+                    package->name() + " " +
+                    package->version() + "-" + package->release();
+            }
+
+            // - print and log
+            cout << summary << endl;
+            if (parser->verbose() > 0) {
+                cout << fullCommand << endl;
+            }
+            if ( m_config->writeLog() ) {
+                time_t endTime;
+                time(&endTime);
+                timestamp = ctime(&endTime);
+                timestamp = commandName + ": build done " + timestamp;
+
+                write( fdlog, summary.c_str(), summary.length() );
+                write( fdlog, "\n", 1 );
+                write( fdlog, fullCommand.c_str(), fullCommand.length() );
+                write( fdlog, "\n", 1 );
+                write( fdlog, timestamp.c_str(), timestamp.length());
+                write( fdlog, "\n", 1 );
+            }
+
+            Process installProc( cmd, args, fdlog );
+            if ( installProc.executeShell() ) {
+                result = PKGADD_FAILURE;
+            } else {
+                // exec post install
+                if ((parser->execPostInstall()  || m_config->runScripts() ) &&
+                    stat((parser->installRoot() + package->path()
+                        + "/" + package->name() + "/" + "post-install").c_str(),
+                        &statData) == 0) {
+                    // Work around the pkgdir variable change
+                    Process postProc( runscriptCommand,
+                                      package->path() + "/" + package->name()+
+                                      "/" + "post-install",
+				      fdlog );
+                    if (postProc.executeShell()) {
+                        info.postState = FAILED;
+                    } else {
+                        info.postState = EXEC_SUCCESS;
+                    }
+                }
+            }
         }
     }
 
@@ -470,7 +481,8 @@ bool InstallTransaction::calculateDependencies()
         return false;
     }
 
-    list<pair<string, const Package*>>::const_iterator it = m_packages.begin();
+    list< pair<string, const Package*> >::const_iterator it =
+        m_packages.begin();
     for ( ; it != m_packages.end(); ++it ) {
         const Package* package = it->second;
         if ( package ) {
@@ -514,8 +526,8 @@ void InstallTransaction::checkDependencies( bool greedy,
 
     if ( index == -1 ) {
         index = m_depList.size();
-	if ( ( not greedy ) or (isRequired( package->name() )) ) {
+	if ( (!greedy) or isRequired( package->name() ) ) {
-        m_depList.push_back( package->name() );
+            m_depList.push_back( package->name() );
 	}
     }
 
@@ -568,7 +580,7 @@ void InstallTransaction::checkDependencies( bool greedy,
                         m_missingPackages.
                         push_back( make_pair( softdep, package->name() ) );
                     }
-		}
+                }
             }
         }
     }
@@ -581,8 +593,8 @@ void InstallTransaction::checkDependencies( bool greedy,
   Method to determine whether a soft dependency should be part of the transaction
 */
 bool InstallTransaction::isRequired(const string &pname) {
-    if ( m_pkgDB->isInstalled(pname) ) { return true; }
+    if ( m_pkgDB->isInstalled(pname,false) ) { return true; }
-    list<pair<string, const Package*>>::iterator it = m_packages.begin();
+    list< pair<string, const Package*> >::iterator it = m_packages.begin();
     for ( ; it != m_packages.end(); ++it ) {
 	    if ( pname == it->first ) { return true; }
     }
@@ -640,11 +652,11 @@ InstallTransaction::installedPackages() const
 /*!
   calculate dependendencies for this package
 */
-bool InstallTransaction::calcDependencies( )
+InstallTransaction::InstallResult
+InstallTransaction::calcDependencies( )
 {
     if ( m_packages.empty() ) {
-        cout << "No packages given for this transaction" << endl;
+        return NO_PACKAGE_GIVEN;
-        return false;
     }
 
     bool validPackages = false;
@@ -657,19 +669,75 @@ bool InstallTransaction::calcDependencies( )
             m_missingPackages.push_back( make_pair( it->first, string("") ) );
         }
     }
+    if ( !validPackages ) {
+        return PACKAGE_NOT_FOUND;
+    }
 
-    if (!validPackages) {
-        cout << "No valid packages for this transaction" << endl;
-        return false;
-    }
     if ( !calculateDependencies() ) {
-        cout << "Cyclic dependencies detected" << endl;
+        return CYCLIC_DEPEND;
-        return false;
     }
-    return true;
+    return SUCCESS;
+}
+
+
+/*
+ * getPkgDest assumes that you're in the build directory already
+ */
+string InstallTransaction::getPkgmkSetting(const string& setting)
+{
+    string value = "";
+    value = getPkgmkSettingFromFile(setting, "/etc/pkgmk.conf");
+    if (value.size() == 0) {
+        value = getPkgmkSettingFromFile(setting, "/usr/bin/pkgmk");
+    }
+
+    return value;
+}
+
+string InstallTransaction::getPkgmkSettingFromFile(const string& setting, const string& fileName)
+{
+    FILE* fp = fopen(fileName.c_str(), "r");
+    if (!fp)
+        return "";
+
+    string candidate;
+    string s;
+    char line[256];
+    while (fgets(line, 256, fp)) {
+        s = StringHelper::stripWhiteSpace(line);
+        if (StringHelper::startsWith(s, setting + "=")) {
+            candidate = s;
+        }
+    }
+    fclose(fp);
+
+    string value = "";
+    if (candidate.length() > 0) {
+        string cmd = "eval " + candidate + " && echo $" + setting;
+        FILE* p = popen(cmd.c_str(), "r");
+        if (p) {
+            fgets(line, 256, p);
+            value = StringHelper::stripWhiteSpace(line);
+            pclose(p);
+        }
+    }
+
+    return value;
 }
 
 const list<string>& InstallTransaction::ignoredPackages() const
 {
     return m_ignoredPackages;
 }
+
+string InstallTransaction::getPkgmkPackageDir()
+{
+    return getPkgmkSetting("PKGMK_PACKAGE_DIR");
+}
+
+string InstallTransaction::getPkgmkCompressionMode()
+{
+    string value = getPkgmkSetting("PKGMK_COMPRESSION_MODE");
+
+    return value.size() ? value : "gz";
+}

src/installtransaction.h

@@ -33,6 +33,10 @@ class Configuration;
 class InstallTransaction
 {
 public:
+    InstallTransaction( const list<char*>& names,
+                        const Repository* repo,
+                        PkgDB* pkgDB,
+                        const Configuration* config );
     InstallTransaction( const list<string>& names,
                         const Repository* repo,
                         PkgDB* pkgDB,
@@ -50,10 +54,10 @@ public:
     /*! Result of an installation */
     enum InstallResult {
         SUCCESS,             /*!< yeah, success */
-        NO_PACKAGE_GIVEN,    /*!< no package given to install */
+        NO_PACKAGE_GIVEN,    /*!< no package give to install */
         PACKAGE_NOT_FOUND,   /*!< package not found */
         PKGMK_FAILURE,       /*!< error while pkgmk */
-        PKGDEST_ERROR,       /*!< can't change to PKGDEST */
+        PKGDEST_ERROR,             /*!< can't change to PKGDEST */
         PKGADD_FAILURE,      /*!< error while pkgadd */
         CYCLIC_DEPEND,       /*!< cyclic dependencies found */
         LOG_DIR_FAILURE,     /*!< couldn't create log directory */
@@ -79,17 +83,22 @@ public:
         bool hasReadme;
     };
 
-    InstallResult install( const ArgParser* parser );
+    InstallResult install( const ArgParser* parser,
-    bool calcDependencies();
+                           bool update );
+    InstallResult  calcDependencies();
 
     const list< pair<string, InstallInfo> >& installedPackages() const;
     const list<string>& alreadyInstalledPackages() const;
     const list<string>& ignoredPackages() const;
 
+
     const list<string>& dependencies() const;
     const list< pair<string,string> >& missing() const;
     const list< pair<string, InstallInfo> >& installError() const;
 
+    static string getPkgmkPackageDir();
+    static string getPkgmkCompressionMode();
+
 private:
     bool calculateDependencies();
     void checkDependencies( bool greedy, const Package* package, int depends=-1 );
@@ -100,6 +109,10 @@ private:
                                   InstallInfo& info ) const;
     bool isRequired(const string &pname);
 
+    static string getPkgmkSetting(const string& setting);
+    static string getPkgmkSettingFromFile(const string& setting, 
+                                          const string& fileName);
+
     PkgDB* m_pkgDB;
     DepResolver m_resolver;
     const Repository* m_repo;
@@ -113,20 +126,21 @@ private:
     // packages< pair<name, hasReadme> > installed by this transaction
     list< pair<string, InstallInfo> > m_installedPackages;
 
-    // packages requested to be installed, but already present
+    // packages which were requested to be installed which where already
     list<string> m_alreadyInstalledPackages;
 
-    // packages required by the transaction, but ignored by the user
+    // packages which are required by the transaction, but ignored by
+    // the user
     list<string> m_ignoredPackages;
 
     list<string> m_depNameList;
     vector<string> m_depList;
     vector<string> treeWalk;
 
-    // packages requested to be installed, but not found in the ports tree
+    // packages requested to be installed not found in the ports tree
     list< pair<string, string> > m_missingPackages;
 
-    // packages where build/install failed
+    // packages where build/installed failed
     list< pair<string, InstallInfo> > m_installErrors;
 
     /// prt-get itself

src/main.cpp

@@ -57,13 +57,17 @@ int main( int argc, char** argv )
 
 
     ArgParser::Type command = argParser.commandType();
-    switch ( command ) {
+    switch ( command )
+    {
         case ArgParser::HELP:
             prtGet.printUsage();
             break;
         case ArgParser::SHOW_VERSION:
             prtGet.printVersion();
             break;
+        case ArgParser::LIST:
+            prtGet.listPackages();
+            break;
         case ArgParser::DUP:
             prtGet.listShadowed();
             break;
@@ -80,16 +84,25 @@ int main( int argc, char** argv )
             prtGet.isInstalled();
             break;
         case ArgParser::INSTALL:
-            prtGet.install( argParser.depSort() );
+            prtGet.install();
             break;
-        case ArgParser::DEPENDS:
+        case ArgParser::DEPINST:
-            prtGet.printDepends( argParser.quick() );
+            prtGet.install( false, true );
-            break;
-	case ArgParser::DEPTREE:
-	    prtGet.printDepTree();
 	    break;
+        case ArgParser::DEPENDS:
+            prtGet.printDepends();
+            break;
+        case ArgParser::QUICKDEP:
+            prtGet.printDepends( true );
+            break;
+        case ArgParser::UPDATE:
+            prtGet.install( true );
+            break;
         case ArgParser::DIFF:
-            prtGet.printDiff( argParser.quick() );
+            prtGet.printDiff();
+            break;
+        case ArgParser::QUICKDIFF:
+            prtGet.printQuickDiff();
             break;
         case ArgParser::CREATE_CACHE:
             prtGet.createCache();
@@ -97,36 +110,36 @@ int main( int argc, char** argv )
         case ArgParser::PATH:
             prtGet.printPath();
             break;
+        case ArgParser::LISTINST:
+            prtGet.listInstalled();
+            break;
         case ArgParser::PRINTF:
             prtGet.printf();
             break;
         case ArgParser::README:
             prtGet.readme();
             break;
+        case ArgParser::DEPENDENT:
+            prtGet.printDependent();
+            break;
+        case ArgParser::SYSUP:
+            prtGet.sysup();
+            break;
         case ArgParser::CURRENT:
             prtGet.current();
             break;
         case ArgParser::FSEARCH:
             prtGet.fsearch();
             break;
-        case ArgParser::LIST:
-            prtGet.listPackages();
-            break;
-        case ArgParser::LISTINST:
-            prtGet.listInstalled();
-            break;
-        case ArgParser::LISTORPHANS:
-            prtGet.listOrphans();
-            break;
-        case ArgParser::LISTLOCKED:
-            prtGet.listLocked();
-            break;
         case ArgParser::LOCK:
             prtGet.setLock( true );
             break;
         case ArgParser::UNLOCK:
             prtGet.setLock( false );
             break;
+        case ArgParser::LISTLOCKED:
+            prtGet.listLocked();
+            break;
         case ArgParser::CAT:
             prtGet.cat();
             break;
@@ -139,9 +152,15 @@ int main( int argc, char** argv )
         case ArgParser::REMOVE:
             prtGet.remove();
             break;
+        case ArgParser::DEPTREE:
+            prtGet.printDependTree();
+            break;
         case ArgParser::DUMPCONFIG:
             prtGet.dumpConfig();
             break;
+        case ArgParser::LISTORPHANS:
+            prtGet.listOrphans();
+            break;
         default:
             cerr << "unknown command" << endl;
             break;

src/package.cpp

@@ -222,7 +222,6 @@ void Package::load() const
 
                     StringHelper::replaceAll( depends, " ", "," );
                     StringHelper::replaceAll( depends, ",,", "," );
-
                     m_data->depends = depends;
                 }
             }

src/pkgdb.h

@@ -32,7 +32,6 @@ public:
                       bool useAlias = false,
                       bool* isAlias = 0,
                       string* aliasOrignalName = 0 ) const;
-    bool isOutdated( const std::string& name ) const;
 
 
     std::string getPackageVersion( const std::string& name ) const;

src/prtget.h

@@ -55,25 +55,22 @@ public:
     void listPackages();
     void listShadowed();
     void listInstalled();
-    void listOrphans();
-    void listLocked();
-    void setLock( bool lock );
 
     void searchPackages( bool searchDesc=false );
-    void fsearch();
-
     void printInfo();
     void isInstalled();
-    bool isOutdated();
-    void current();
     void readme();
 
-    void install( bool dependencies=false );
+    void install( bool update=false,
-    void remove();
+                  bool dependencies=false );
-
+    void sysup();
+    void current();
     void printDepends( bool simpleListing=false );
-    void printDiff( bool simpleListing=false );
+    void printDependTree();
-    void printDepTree();
+    void printDependent();
+    void printDiff();
+    void printQuickDiff();
+    void listOrphans();
 
     void createCache();
 
@@ -83,6 +80,14 @@ public:
     void cat();
     void ls();
     void edit();
+
+    void remove();
+
+    void setLock( bool lock );
+    void listLocked();
+
+    void fsearch();
+
     void dumpConfig();
 
     int returnValue() const;
@@ -91,10 +96,14 @@ public:
 
 protected:
 
-    void printDepsLevel(int level, const Package* package, bool greedy);
+    void printDepsLevel(int indent, const Package* package, bool greedy);
 
-    void executeTransaction( InstallTransaction& transaction );
+    void printDependent(const std::string& dep, int level);
-    void evaluateResult( InstallTransaction& transaction, 
+
+    void executeTransaction( InstallTransaction& transaction,
+                             bool update );
+    void evaluateResult( InstallTransaction& transaction,
+                      bool update,
                       bool interrupted=false );
     void reportPrePost(const InstallTransaction::InstallInfo& info);
 
@@ -113,6 +122,7 @@ protected:
                                        const string& version2,
                                        bool locked);
 
+
     Repository* m_repo;
     PkgDB* m_pkgDB;
     Configuration* m_config;

src/repository.cpp

@@ -86,26 +86,12 @@ const Package* Repository::getPackage( const string& name ) const
     return it->second;
 }
 
-/*!
-  \param name the package name to be matched
-  \return the version-release in the repository
-*/
-std::string Repository::getPackageVersion( const string& name ) const
-{
-    map<string, Package*>::const_iterator it = m_packageMap.find( name );
-    if ( it == m_packageMap.end() ) {
-        return "0";
-    }
-    const Package* p = it->second;
-    string result = p->version()+"-"+p->release();
-    return result;
-}
 
 /*!
-  Search packages for a match of \a pattern in name, or in description if
+  Search packages for a match of \a pattern in name, and description of
   \a searchDesc is true.
-  \note Name searches can often be done without opening the Pkgfiles, but not
+  \note Name searches can often done without opening the Pkgfiles, but not
-  description search. Therefore, the latter is much slower
+  description search. Therefore, the later is much slower
 
   \param pattern the pattern to be found
   \param searchDesc whether descriptions should be searched as well
@@ -202,10 +188,11 @@ void Repository::initFromFS( const list< pair<string, string> >& rootList,
 
 
 
-        // TODO: think about whether it would be faster (more efficient) 
+        // TODO: think about whether it would be faster (more
-	// to put all packages into a map, and then iterate
+        // efficient) to put all packages into a map, and the iterate
-        // over the list of allowed packages and copy them over.
+        // over the list of allowed packages and copy them
-	// Depending on the efficiency of find(), this might be faster.
+        // over. depending in the efficiency of find(), this might be
+        // faster
         d = opendir( path.c_str() );
         while ( ( de = readdir( d ) ) != NULL ) {
             name = de->d_name;
@@ -340,20 +327,9 @@ Repository::WriteResult Repository::writeCache( const string& cacheFile )
         const Package* p = it->second;
 
         // TODO: encode
-        hasReadme = noStr;
+        hasReadme = ( p->hasReadme() ) ? yesStr : noStr;
-        if ( p->hasReadme() ) {
+        hasPreInstall = ( p->hasPreInstall() ) ? yesStr : noStr;
-            hasReadme = yesStr;
+        hasPostInstall = ( p->hasPostInstall() ) ? yesStr : noStr;
-        }
-
-        hasPreInstall = noStr;
-        if ( p->hasPreInstall() ) {
-            hasPreInstall = yesStr;
-        }
-
-        hasPostInstall = noStr;
-        if ( p->hasPostInstall() ) {
-            hasPostInstall = yesStr;
-        }
 
         fprintf( fp, "%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n%s\n\n",
                  p->name().c_str(),
@@ -403,37 +379,6 @@ bool Repository::createOutputDir( const string& path )
     return true;
 }
 
-/*
-  look for any port mentioning \a pattern as a dependency or soft dependency.
-  searchOptionals=false (the default) only searches the "Depends on:" line.
-  The output will need to be trimmed afterward, because in this namespace we 
-  can't check whether the matching ports are installed.
-*/
-void Repository::getDependentPackages( const string& pattern,
-                                         list<Package*>& target,
-                                         bool searchOptionals ) const {
-
-    map<string, Package*>::const_iterator im = m_packageMap.begin();
-    for ( ; im != m_packageMap.end(); ++im ) {
-	    Package* q = im->second; string s;
-	    if (searchOptionals) {
-		    s = toLowerCase(q->optionals());
-	    } else {
-		    s = toLowerCase(q->dependencies());
-	    }
-
-	    if ( s.find( pattern ) != string::npos ) {
-	        list<string> tokens;
-		split( s, ',', tokens );
-		list<string>::iterator ik = find( tokens.begin(),
-				tokens.end(), pattern );
-		if ( ik != tokens.end() ) {
-			target.push_back( q );
-		}
-	    }
-    }
-}
-
 
 /*!
   Search packages for a match of \a pattern in name. The name can

src/repository.h

@@ -19,7 +19,6 @@
 using namespace std;
 
 #include "package.h"
-#include "stringhelper.h"
 
 /*!
   \class Repository
@@ -34,7 +33,6 @@ public:
     ~Repository();
 
     const Package* getPackage( const string& name ) const;
-    std::string getPackageVersion( const string& name ) const;
     const map<string, Package*>& packages() const;
     const list<pair<Package*, Package*> >& shadowedPackages() const;
 
@@ -42,10 +40,6 @@ public:
                                  list<Package*>& target,
                                  bool searchDesc ) const;
 
-    void getDependentPackages( const string& pattern,
-                                 list<Package*>& target,
-                                 bool searchOptionals ) const;
-
     void getMatchingPackages( const string& pattern,
                               list<Package*>& target ) const;
 

src/stringhelper.cpp

@@ -155,4 +155,5 @@ string replaceAll( string& in,
     return in;
 }
 
+
 }; // Namespace