irmc - Internet Relay Morse Code

IRMC stands for Internet Relay Morse Code and is an implementation of MOIP. It implements the CWCom protocol as adopted by MorseKOB. You can try out the software in a browser using Java.

How to build?

Install dependency: morse keyer library

wget https://github.com/8cH9azbsFifZ/morse/archive/v0.1.tar.gz
tar xzf v0.1.tar.gz
cd morse-0.1
libtoolize
./autogen.sh
./configure  --with-portaudio
make
sudo make install

Debian (Wheezy)

Some dependencies have to be installed:

apt-get install -y alsa-oss oss-compat build-essential autoconf libao-dev libtool

Afterwards compilation with make should work. If something went wrong, you may have to adjust your LD_LIBRARY_PATH. Alternatively try:

LD_LIBRARY_PATH=/usr/local/lib ./irmc mtc-kob.dyndns.org 7890 33 123

OSX (Yosemite)

Compilation with make :)

For the USB serial devices you need a PL2303 driver (i.e. PL2303_Serial-USB_on_OSX_Lion.pkg).

Testing with MorseKOB 3.0 (Java)

This software will run on Linux, Windows and OSX. With the RXTX software for Java (i.e. librxtxSerial.jnilib on OSX) it is even possible to connect to external hardware. NB: before you transmit make sure you uncheck the "circuit closer".

Or you may want to use tcpdump, i.e.:

sudo tcpdump -i all -vvvv "host faeroes.sdf.org"

How to use:

The usage is: irmc [hostname] [port] [channel] [id] [serialport

For example: `./irmc mtc-kob.dyndns.org 7890 103 MyID /dev/tty.usbserial´

Hardware interface options

A good description on how to build differnt interfaces (telegraph key, sounder or both) is given on the MorseKOB Website. Landline telegraphs use "closed circuits" for communications; if you have built one at home, you may also use the loop interface.

Connection of a morse key: Serial PIN: 4 & 6 layout of pins Connecting the palm radio: keep an eye on the grounding :)

Changelog

v0.2 zip - ported to debian wheezy and osx yosemite, DG6FL
v0.1 zip - original version, VE7FEB

References

Original post by Fernan Bolando (VE4FEB)

There are few difference between this and the official cwcom client

It is a command line tool

It does not send the characters of the message to the receivers screen.

It does not translate CW for you. You can try fldigi if you just want see the transmission.

Tone pitch is currently hard coded to 650Hz

It does not have a way to show you who is listening.

Code Quality

This is experimental code.

3.3 KiB Raw Blame History Unescape Escape