175 lines
5.3 KiB
Bash
Executable File
175 lines
5.3 KiB
Bash
Executable File
#!/bin/bash
|
|
|
|
SCRIPTDIR=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
|
|
source $SCRIPTDIR/common.sh
|
|
|
|
FEL=fel
|
|
|
|
METHOD=${METHOD:-fel}
|
|
AFTER_FLASHING=${AFTER_FLASHING:-boot}
|
|
|
|
echo "BUILDROOT_OUTPUT_DIR = $BUILDROOT_OUTPUT_DIR"
|
|
|
|
NAND_ERASE_BB=false
|
|
if [ "$1" == "erase-bb" ]; then
|
|
NAND_ERASE_BB=true
|
|
fi
|
|
|
|
PATH=$PATH:$BUILDROOT_OUTPUT_DIR/host/usr/bin
|
|
TMPDIR=`mktemp -d -t chipflashXXXXXX`
|
|
PADDED_SPL="$TMPDIR/sunxi-padded-spl"
|
|
PADDED_SPL_SIZE=0
|
|
UBOOT_SCRIPT="$TMPDIR/uboot.scr"
|
|
UBOOT_SCRIPT_MEM_ADDR=0x43100000
|
|
UBOOT_SCRIPT_SRC="$TMPDIR/uboot.cmds"
|
|
SPL="$BUILDROOT_OUTPUT_DIR/images/sunxi-spl.bin"
|
|
SPL_MEM_ADDR=0x43000000
|
|
UBOOT="$BUILDROOT_OUTPUT_DIR/images/u-boot-dtb.bin"
|
|
PADDED_UBOOT="$TMPDIR/padded-uboot"
|
|
PADDED_UBOOT_SIZE=0xc0000
|
|
UBOOT_MEM_ADDR=0x4a000000
|
|
UBI="$BUILDROOT_OUTPUT_DIR/images/rootfs.ubi"
|
|
UBI_MEM_ADDR=0x4b000000
|
|
|
|
UBI_SIZE=`filesize $UBI | xargs printf "0x%08x"`
|
|
PAGE_SIZE=16384
|
|
OOB_SIZE=1664
|
|
|
|
prepare_images() {
|
|
local in=$SPL
|
|
local out=$PADDED_SPL
|
|
|
|
if [ -e $out ]; then
|
|
rm $out
|
|
fi
|
|
|
|
if [[ ! -e "${SCRIPTDIR}/spl-image-builder" ]]; then
|
|
pushd "${SCRIPTDIR}"
|
|
make
|
|
popd
|
|
fi
|
|
|
|
"${SCRIPTDIR}/spl-image-builder" -d -r 3 -u 4096 -o 1664 -p 16384 -c 1024 -s 64 "$in" "$out"
|
|
|
|
#PADDED_SPL_SIZE in pages
|
|
PADDED_SPL_SIZE=$(filesize "$out")
|
|
PADDED_SPL_SIZE=$(($PADDED_SPL_SIZE / ($PAGE_SIZE + $OOB_SIZE)))
|
|
PADDED_SPL_SIZE=$(echo $PADDED_SPL_SIZE | xargs printf "0x%08x")
|
|
echo "filesize= $(filesize "$out")"
|
|
echo "PADDED_SPL_SIZE=$PADDED_SPL_SIZE"
|
|
|
|
# Align the u-boot image on a page boundary
|
|
dd if="$UBOOT" of="$PADDED_UBOOT" bs=16k conv=sync
|
|
UBOOT_SIZE=`filesize "$PADDED_UBOOT" | xargs printf "0x%08x"`
|
|
dd if=/dev/urandom of="$PADDED_UBOOT" seek=$((UBOOT_SIZE / 0x4000)) bs=16k count=$(((PADDED_UBOOT_SIZE - UBOOT_SIZE) / 0x4000))
|
|
}
|
|
|
|
prepare_uboot_script() {
|
|
if [ "$NAND_ERASE_BB" = true ] ; then
|
|
echo "nand scrub -y 0x0 0x200000000" > "${UBOOT_SCRIPT_SRC}"
|
|
else
|
|
echo "nand erase 0x0 0x200000000" > "${UBOOT_SCRIPT_SRC}"
|
|
fi
|
|
echo "echo sunxi_nand config spl" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "sunxi_nand config spl" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "echo nand write.raw $SPL_MEM_ADDR 0x0 $PADDED_SPL_SIZE" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "nand write.raw $SPL_MEM_ADDR 0x0 $PADDED_SPL_SIZE" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "echo nand write.raw $SPL_MEM_ADDR 0x400000 $PADDED_SPL_SIZE" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "nand write.raw $SPL_MEM_ADDR 0x400000 $PADDED_SPL_SIZE" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "sunxi_nand config default" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "nand write $UBOOT_MEM_ADDR 0x800000 $PADDED_UBOOT_SIZE" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "setenv bootargs root=ubi0:rootfs rootfstype=ubifs rw earlyprintk ubi.mtd=4" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "setenv bootcmd 'source \${scriptaddr}; nand slc-mode on; mtdparts; ubi part UBI; ubifsmount ubi0:rootfs; ubifsload \$fdt_addr_r /boot/sun5i-r8-chip.dtb; ubifsload \$kernel_addr_r /boot/zImage; bootz \$kernel_addr_r - \$fdt_addr_r'" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "saveenv" >> "${UBOOT_SCRIPT_SRC}"
|
|
|
|
if [[ "${METHOD}" == "fel" ]]; then
|
|
echo "nand slc-mode on" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "nand write.trimffs $UBI_MEM_ADDR 0x1000000 $UBI_SIZE" >> "${UBOOT_SCRIPT_SRC}"
|
|
echo "mw \${scriptaddr} 0x0" >> "${UBOOT_SCRIPT_SRC}"
|
|
else
|
|
echo "echo going to fastboot mode" >>"${UBOOT_SCRIPT_SRC}"
|
|
echo "fastboot" >>"${UBOOT_SCRIPT_SRC}"
|
|
fi
|
|
|
|
if [[ "${AFTER_FLASHING}" == "boot" ]]; then
|
|
echo "echo " >>"${UBOOT_SCRIPT_SRC}"
|
|
echo "echo *****************[ BOOT ]*****************" >>"${UBOOT_SCRIPT_SRC}"
|
|
echo "echo " >>"${UBOOT_SCRIPT_SRC}"
|
|
echo "boot" >> "${UBOOT_SCRIPT_SRC}"
|
|
else
|
|
echo "echo " >>"${UBOOT_SCRIPT_SRC}"
|
|
echo "echo *****************[ FLASHING DONE ]*****************" >>"${UBOOT_SCRIPT_SRC}"
|
|
echo "echo " >>"${UBOOT_SCRIPT_SRC}"
|
|
echo "while true; do; sleep 10; done;" >>"${UBOOT_SCRIPT_SRC}"
|
|
fi
|
|
|
|
mkimage -A arm -T script -C none -n "flash CHIP" -d "${UBOOT_SCRIPT_SRC}" "${UBOOT_SCRIPT}"
|
|
}
|
|
|
|
|
|
##############################################################
|
|
# main
|
|
##############################################################
|
|
while getopts "fl" opt; do
|
|
case $opt in
|
|
f)
|
|
echo "fastboot enabled"
|
|
METHOD=fastboot
|
|
;;
|
|
l)
|
|
echo "factory mode remain in u-boot after flashing"
|
|
AFTER_FLASHING=loop
|
|
;;
|
|
\?)
|
|
echo "Invalid option: -$OPTARG" >&2
|
|
exit 1
|
|
;;
|
|
esac
|
|
done
|
|
|
|
|
|
echo == preparing images ==
|
|
prepare_images
|
|
prepare_uboot_script
|
|
|
|
echo == upload the SPL to SRAM and execute it ==
|
|
if ! wait_for_fel; then
|
|
echo "ERROR: please make sure CHIP is connected and jumpered in FEL mode"
|
|
fi
|
|
${FEL} spl "${SPL}"
|
|
|
|
sleep 1 # wait for DRAM initialization to complete
|
|
|
|
echo == upload spl ==
|
|
${FEL} write $SPL_MEM_ADDR "${PADDED_SPL}"
|
|
|
|
echo == upload u-boot ==
|
|
${FEL} write $UBOOT_MEM_ADDR "${PADDED_UBOOT}"
|
|
|
|
echo == upload u-boot script ==
|
|
${FEL} write $UBOOT_SCRIPT_MEM_ADDR "${UBOOT_SCRIPT}"
|
|
|
|
if [[ "${METHOD}" == "fel" ]]; then
|
|
echo == upload ubi ==
|
|
${FEL} --progress write $UBI_MEM_ADDR "${UBI}"
|
|
|
|
echo == execute the main u-boot binary ==
|
|
${FEL} exe $UBOOT_MEM_ADDR
|
|
|
|
echo == write ubi ==
|
|
else
|
|
echo == execute the main u-boot binary ==
|
|
${FEL} exe $UBOOT_MEM_ADDR
|
|
|
|
echo == waiting for fastboot ==
|
|
if wait_for_fastboot; then
|
|
fastboot -S 0 -u flash UBI ${BUILDROOT_OUTPUT_DIR}/images/rootfs.ubi
|
|
fastboot continue
|
|
else
|
|
rm -rf "${TMPDIR}"
|
|
exit 1
|
|
fi
|
|
fi
|
|
|
|
rm -rf "${TMPDIR}"
|