Permit users to set different binaries for the utilities

chip-create-nand-images.sh

@@ -1,10 +1,15 @@
-#!/bin/bash -x
-
-FEL=sunxi-fel
+#!/bin/bash
 
 SCRIPTDIR=$( cd "$( dirname "${BASH_SOURCE[0]}" )" && pwd )
 source $SCRIPTDIR/common.sh
 
+if [[ -z $(which ${MKFS_UBIFS}) ]]; then
+  echo "Could not find ${MKFS_UBIFS} in path."
+  echo "Install it with the CHIP-SDK setup script."
+  echo "You will also need to run this script as root."
+  exit 1
+fi
+
 UBOOTDIR="$1"
 ROOTFSTAR="$2"
 OUTPUTDIR="$3"
@@ -59,7 +64,7 @@ prepare_ubi() {
 
   mkdir -p $rootfs
   tar -xf $rootfstar -C $rootfs
-  mkfs.ubifs -d $rootfs -m $pagesize -e $lebsize -c $maxlebcount -o $ubifs
+  ${MKFS_UBIFS} -d $rootfs -m $pagesize -e $lebsize -c $maxlebcount -o $ubifs
   echo "[rootfs]
 mode=ubi
 vol_id=0
@@ -93,7 +98,7 @@ prepare_spl() {
   local padding=$tmpdir/padding
   local splpadding=$tmpdir/nand-spl-padding
 
-  sunxi-nand-image-builder -c 64/1024 -p $pagesize -o $oobsize -u 1024 -e $eraseblocksize -b -s $spl $nandspl
+  ${SNIB} -c 64/1024 -p $pagesize -o $oobsize -u 1024 -e $eraseblocksize -b -s $spl $nandspl
 
   local splsize=`filesize $nandspl`
   local paddingsize=$((64-(splsize/(pagesize+oobsize))))
@@ -101,7 +106,7 @@ prepare_spl() {
 
   while [ $i -lt $repeat ]; do
     dd if=/dev/urandom of=$padding bs=1024 count=$paddingsize
-    sunxi-nand-image-builder -c 64/1024 -p $pagesize -o $oobsize -u 1024 -e $eraseblocksize -b -s $padding $splpadding
+    ${SNIB} -c 64/1024 -p $pagesize -o $oobsize -u 1024 -e $eraseblocksize -b -s $padding $splpadding
     cat $nandspl $splpadding > $nandpaddedspl
 
     if [ "$i" -eq "0" ]; then

common.sh

@@ -1,7 +1,12 @@
 #!/bin/bash 
 
 TIMEOUT=30
-FEL=sunxi-fel
+FEL=${FEL:-sunxi-fel}
+FASTBOOT=${FASTBOOT:-fastboot}
+MKIMAGE=${MKIMAGE:-mkimage}
+MKFS_UBIFS=${MKFS_UBIFS:-mkfs.ubifs}
+SNIB=${SNIB:-sunxi-nand-image-builder}
+TOOLS=( ${FEL} ${FASTBOOT} ${MKIMAGE} ${SNIB})
 SPLMEMADDR=0x43000000
 UBOOTMEMADDR=0x4a000000
 UBOOTSCRMEMADDR=0x43100000
@@ -9,13 +14,14 @@ nand_erasesize=400000
 nand_writesize=4000
 nand_oobsize=680
 
-if [[ -z $(which $FEL) ]]; then
-  echo "  Error: Unable to locate FEL utility."
-  echo "  Install FEL with:"
-  echo "  CHIP-SDK setup script      [github.com/NextThingCo/CHIP-SDK]"
-  echo "     - or build from source  [github.com/linux-sunxi/sunxi-tools]"
-  exit 1
-fi
+for TOOL in ${TOOLS[@]}; do
+  if [[ -z $(which $TOOL) ]]; then
+    echo "  Error: Unable to locate $TOOL utility."
+    echo "  Install $TOOL with:"
+    echo "  CHIP-SDK setup script      [github.com/NextThingCo/CHIP-SDK]"
+    exit 1
+  fi
+done
 
 #------------------------------------------------------------
 onMac() {
@@ -39,7 +45,7 @@ filesize() {
 wait_for_fastboot() {
   echo -n "waiting for fastboot...";
   for ((i=$TIMEOUT; i>0; i--)) {
-    if [[ ! -z "$(fastboot -i 0x1f3a $@ devices)" ]]; then
+    if [[ ! -z "$(${FASTBOOT} -i 0x1f3a $@ devices)" ]]; then
       echo "OK";
       return 0;
     fi
@@ -77,7 +83,7 @@ detect_nand() {
   echo "nand info
 env export -t -s 0x100 0x7c00 nand_erasesize nand_writesize nand_oobsize
 reset" > $ubootcmds
-  mkimage -A arm -T script -C none -n "detect NAND" -d $ubootcmds $ubootscr || return 1
+  ${MKIMAGE} -A arm -T script -C none -n "detect NAND" -d $ubootcmds $ubootscr || return 1
 
   if ! wait_for_fel; then
     echo "ERROR: please make sure CHIP is connected and jumpered in FEL mode"
@@ -188,7 +194,7 @@ flash_images() {
   
   echo "$RESET_COMMAND" >> $ubootcmds  
 
-  mkimage -A arm -T script -C none -n "flash $FLAVOR" -d $ubootcmds $ubootscr || RC=1
+  ${MKIMAGE} -A arm -T script -C none -n "flash $FLAVOR" -d $ubootcmds $ubootscr || RC=1
 
   if ! wait_for_fel; then
     echo "ERROR: please make sure CHIP is connected and jumpered in FEL mode"
@@ -205,8 +211,8 @@ flash_images() {
   $FEL exe $UBOOTMEMADDR || RC=1
 
   if wait_for_fastboot; then
-    fastboot -i 0x1f3a -u flash UBI $IMAGESDIR/chip-$nand_erasesize-$nand_writesize-$nand_oobsize.ubi.sparse || RC=1
-    fastboot -i 0x1f3a continue > /dev/null
+    ${FASTBOOT} -i 0x1f3a -u flash UBI $IMAGESDIR/chip-$nand_erasesize-$nand_writesize-$nand_oobsize.ubi.sparse || RC=1
+    ${FASTBOOT} -i 0x1f3a continue > /dev/null
   else
     echo "failed to flash the UBI image"
     RC=1