Output before:
```
11:00:00 - Annonuce OpenPGP Key for OX ~/test/testuser.pub.gpg ...
```
After:
```
11:00:00 - Annonuce OpenPGP Key for OX /home/user/test/testuser.pub.gpg ...
```
Now we expand the path so that we can check for `~` properly.
And test if the file is actually a normal file.
Set this to 0.
We might want to have this configurable later.
For now we fix the valgrind report:
```
Conditional jump or move depends on uninitialised value
xmpp_debug_verbose()
```
Which will be fixed in libstrophe > 0.11.0 by commit
28f3ce19b8
Previously it relied on AX_PYTHON_DEVEL, which in turn executes
python-config to get the build flags. However this does not work while
cross compiling because we can't execute the python-config build for the
target platform. To circumvent this problem the python build flags are
now queried via pkgconfig, which has the drawback of not having some
extra build flags, but they do not seem to be needed.
I tested this patch with the termux build system and it build without
their existing hack of injecting python after the configure step. I also
tested non cross compile build on Arch Linux and it also still works.
Fixes#851
Remove support for libsignal-protocol-c < 2.3.2.
Debian 10 uses 2.3.2, Debian 11 and 12 use 2.3.3.
openSUSE from 15.2 onward uses 2.3.3.
Fedora since 28 uses 2.3.2.
We should be good.
When a `see-other-host` stream-error is received we try to re-connect to
the other host. Erroneously this also started the `reconnect_timer`.
This lead to the behavior that in cases where e.g. the login failed
we try to reconnect instead of bailing out with an error.
This commit fixes the wrong behavior by not starting the `reconnect_timer`.
Fix 0e58509c16
Signed-off-by: Steffen Jaeckel <jaeckel-floss@eyet-services.de>
It shouldn't happen that we get the presence stanza without a resource.
https://datatracker.ietf.org/doc/html/rfc6120
```
Implementation Note: It is the server's responsibility to deliver
only stanzas that are addressed to the client's full JID or the
user's bare JID; thus, there is no need for the client to check
the 'to' address of incoming stanzas. However, if the client does
check the 'to' address then it is suggested to check at most the
bare JID portion (not the full JID), since the 'to' address might
be the user's bare JID, the client's current full JID, or even a
full JID with a different resourcepart (e.g., in the case of so-
called "offline messages" as described in [XEP-0160]).
```
Let's not segfault though.
Close https://github.com/profanity-im/profanity/issues/1630
The original intention of the code was that in case archive_id is not set, NULL should be inserted. What is
inserted however is an empty string. This causes the condition to not insert messages with non-unique
archive_id insert only one message in total and ignore all further ones (if NULL was there, the condition
would work properly). And this in turn causes chat history not work properly.
This commit makes the SQL condition work properly and therefore fixes chat history.
Fixes#1589.
Like mentioned on the review at
https://github.com/profanity-im/profanity/pull/1605 I don't ge why
@DebXWoody changed the code like he did.
I changed it to something that made more sense to me now.
Instead of looking for headline in two places and checking for pubsub in
a headline place (only).
I didn't check this deeply. And still have a feeling that this is not
the best way to go. But I didn't read the XEP yet.
Added a TODO to the code regarding this too.
A quick skimming through https://xmpp.org/extensions/xep-0107.html
doesn't show me anything regarding headline. So I really don't see why
this needs to go here.
Hopefully @DebXWoody checks this in the future. But since he didn't
react on the PR I decided to make some adjustments myself so we can
merge it.
* Remarks in the Merge Request (ac_reset, help)
* Defines in iq.c
* Mood help and null check
* Added additional information about tab key in CMD_DESC.
* Added additional null check
We came into the carbons checking code when we received `<private
xmlns="urn:xmpp:carbons:2"/>`. Which actually marks a message to _not_
be a carbon.
In this code we also make sure that carbons only come from us.
If not we don't call the message handler code.
So we should actually only check for `<sent xmlns='urn:xmpp:carbons:2'>`
and `<received xmlns='urn:xmpp:carbons:2'>`.
Thanks pukkamustard and Holger.
Fixes https://github.com/profanity-im/profanity/issues/1614
gcc-12 detects redundant check against array of arrays as:
src/plugins/python_api.c: In function ‘python_api_register_command’:
src/plugins/python_api.c:199:31: error: the comparison will always evaluate as ‘true’ for the address of ‘c_arguments’ will never be NULL [-Werror=address]
199 | while (c_arguments[i] != NULL && c_arguments[i][0] != NULL) {
| ^~
src/plugins/python_api.c:161:15: note: ‘c_arguments’ declared here
161 | char* c_arguments[args_len == 0 ? 0 : args_len + 1][2];
| ^~~~~~~~~~~
gcc-12 detects redundant check against array of arrays as:
src/plugins/callbacks.c: In function ‘_free_command_help’:
src/plugins/callbacks.c:85:26: error: the comparison will always evaluate as ‘true’ for the address of ‘args’ will never be NULL [-Werror=address]
85 | while (help->args[i] != NULL && help->args[i][0] != NULL) {
| ^~
In file included from ./src/ui/ui.h:44,
from ./src/command/cmd_defs.h:42,
from src/plugins/callbacks.c:41:
./src/command/cmd_funcs.h:48:12: note: ‘args’ declared here
48 | gchar* args[128][2];
| ^~~~
* Fix `src/command/cmd_funcs.c:9463:9: error: ignoring return value of
‘write’ declared with attribute ‘warn_unused_result’
[-Werror=unused-result]`
* Free memory earlier and on less places
* Check for succesful open() and write()
After generation of an identity we observe that `omemo_ctx.device_list`
has an entry for sender's jid. But on application restart it is absent
thus messages are not encrypted for the rest set of sender devices.
This commit fixes this by applying code for acquiring the aforementioned device list after the connection.
We decided that it was better to remove autocomplete for this command,
since adding it only introduced problems and the command can still
function perfectly without autocomplete.
This and the following commits should make a couple of more configs
allow utf8 chars so people can use their weird icons :-)
We did the same for the otr/omemo/pgp indicators at:
1f8b1eb7405cf6ee1bc6
Fixes https://github.com/profanity-im/profanity/issues/1423
Oldest stanza is fetched like before but now the timestamp is generated by creating date_time_from_iso8601 and then to_local, instead of trusting that the timestamp is in utc.
The procedure previously was stamp = time_val_from_iso8601() then date_time = date_time_from_utc(stamp) then local_date_time = to_local(date_time)
`/plugins install` installs a plugin to
`.local/share/profanity/plugins`.
And also loads it.
When a plugin is loaded it will automatically be added to the `profrc`
file like this:
```
[plugins]
load=my.py;
```
On the next start Profanity will try to load this plugin again unless
`/plugin unload my.py` is called.
If `~/dir` exists profanity exits for me.
Whole code for updating plugins from a dir isn't even implemented. Even
though some messgages suggest otherwise.
Remove this and only allow updating of one file.
Two options to install plugins.
Mention the whole path:
`/plugins install ~/src/profanity-plugins/my.py`
Mention only the plugin name:
`/plugins install my.py`
The latter will look in `/usr/local/share/profanity/plugins/` for the
file and copy it over to `~/.local/share/profanity/plugins`.
At first I was thinking about loading the plugins from the global
location. But users most likely don't want to have all plugins activated
that an admin installs on a system.
Regards https://github.com/profanity-im/profanity/issues/945
I feel like this mostly is confusing people.
Also don't see much value for it.
To me it looks like a regular workflow is like:
```
/plugin install ~/src/profanity-plugins/my.py
```
The whole thing with sourcepath, install (which also loads without
having that described anywhere), load etc is confusing.
Also each plugin file that is present in
`.local/share/profanity/plugins` will then be auto loaded. Which means
after installation.
Set PREF_NOTIFY_MENTION_WHOLE_WORD to true.
If I'm not mistaken the _mucwin_print_mention() / get_mentions()
functions only work correctly since
6bc440c6f7.
This changed the behaviour for users.
They got notified when their nick was `kaffee` and in the message the
string `kaffeekanne` occured.
Setting `/notify room mention word_whole` corrected this.
So my idea is that only now the mention function work correctly. And to
have a good default behaviour we should set the `word_whole` on by
default.
Regards https://github.com/profanity-im/profanity/issues/1578
- Added JABBER_RAW_CONNECT[ING/ED] connection states
- Added cl_ev_connect_raw and session_connect_raw to conform to normal
connection functions
- Fixed SIGABRT during registration
- Added a check in cmd_register to ensure it's actually connected before
registering--but this will always fail atm
_chatwin_history() reassigns msg->plain without freeing previous
string. This leads to memory leak. As a temporary solution, free
replaced string.
Fixes#1585.
Offset for g_utf8_substring() is higher than the string length. We can
avoid g_utf8_substring() for the tail and simply convert starting offset
to a pointer.
Since I didn't find a way to discover whether a notification server is
running I decided to disable them by default. So people without one will
not have such a bad lag due to timeout from libnotify.
Fix https://github.com/profanity-im/profanity/issues/977
See https://github.com/profanity-im/profanity/issues/1518
It has a good explanation of what happened:
```
Apparently, the _rotate_log_file function tried to extract user-provided
name from currently used mainlogfile and restart logging to the same
place after rotation, but currently this is interpreted as a full path
instead. As I understand, the log rotation is no longer done with
user-provided paths at all so this should be simply skipped altogether
now as passing any non-NULL value is interpreted as user-provided.
Replacing start with NULL appears to fix it for me.
```
In log_msg() we only rotate the log if not user_provided_log.
https://github.com/profanity-im/profanity/pull/1455 changed the
behaviour from user defined filename in the log dir to using full path.
`jubalh: jubalh jubalh` resulted in `20:32:34 - testuser1:
jubalh20:32:34 - testuser1: : jubalh20:32:34
- testuser1: jubalh`
Print date/nick only once at beginning of line.
get_mentions() correctly counts utf-8 chars. So the positions of
mentions we get from there are correct.
But in _mucwin_print_mention() we set position equal to byte.
We need to use utf-8 safe functions here.
Regards https://github.com/profanity-im/profanity/issues/1231
In profanity are two handlers for device list:
* _handle_own_device_list
* _handle_device_list_start_session
I seems both handler will start a session via
omemo_start_device_session_handle_bundle
_handle_own_device_list will also make sure, that the own device is withing the
omemo device list. If we add the _handle_device_list_start_session into the
hashmap, we are not going the republish ourself, in case we clean-up the device
list from another client.
This will maybe fix#1552
99 Little Bugs in my Code.
Take one down.
Patch it around.
113 Bugs in my Code
This bug was introduced in 1ec606540e when
`g_strdup_printf` was used instead of `asprintf`.
Problem discoverd by raspeguy.
Mistake discovered by optmzr and Martin.
Thanks to everybody involved!
When the connection has been re-established, chat and groupchat with OMEMO
should restat the OMEMO Session.
Fix: #1530
* Added HAVE_OMEMO
* clang-format and user output
If we are not able to publish our own device list, we just ignored it.
This commit will show at least an error message and informs the user that this
device is currently not in the list of devices.
See Issue: #1538
Next task will be to handle the <precondition-not-met/> conflict properly.
* Display the `[ATTENTION]` hint in the titlebar for both chatwins and
mucwins.
* Use THEME_TITLE_TEXT instead of THEME_TITLE_ENCRYPT
* Have separate function `_show_attention` and don't do it in unrelated
`_show_privacy`.
As defined in XEP-0384 the application should not encrypt the message to own
devices. Within a groupchat, yourself are a recipients as well.
We will check the recipients and filter out the own device of the own jid.
This Pull Request will fix Issue: #1541
The most loggings has been set to debug. Just in case of error / problem the
logging should be done with log-level ERROR or WARNING.
We will see later, which loggings should be switched to log-level INFO.
This improvement has been done to find OMEMO bugs.
See also: #1070#1530#1538
Old: `/intype on|of`
Typing information is printed in console and titlebar.
New: `/intype titlebar|console on|off`
Typing information can be configured in more detail.
Regards https://github.com/profanity-im/profanity/issues/1516
Our variable `alphabet` contains 62 alphanumeric symbols + '\0'.
When we use sizeof(alphabet) we will get 63 due to that.
But we want to choose a random numbers from the 62 alphanumeric letters only.
This mistake caused us to have strings with a max length of `length`
instead of the exact length.
When doing https://github.com/profanity-im/profanity/issues/1520
this caused our algo for muc reflection to not catch since we expect the
random ID to be exactly 15 symbols long in `message_is_sent_by_us()`.
