In setup_session, use copy_location, add_to_history, and
render_document_frames instead of goto_uri and copy_vs to copy the base
tab's view state. By avoiding goto_uri, setup_session now bypasses MIME
checks, form post confirmations, malicious URL checks, and so on when
copying the base tab's current location and view state to the new tab,
so the new tab should get exactly what was loaded in the base tab.
This fixes bug 765: Opening a new tab can ask about the document of the
previous tab.
(cherry picked from commit 5c96d430c9)
Conflicts:
src/session/session.c:
Both elinks-0.12 and master had the ses->doc_view->vs
= vs assignment, but only elinks-0.12 had vs->doc_view
= ses->doc_view as well. Also, struct connection_state
had been added after the original patch.
In the task.c line 517 there is:
if (is_in_progress_state((*download_p)->state)) {
if (have_location(ses))
*download_p = &cur_loc(ses)->download;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Here the download was changed. download->data and download->callback
were NULL after the assignment, but later in loading_callback
only download->callback had new value. download->data was still NULL.
Yet another valiant wack at the beast. This one violates abstractions
a little less deeply, so maybe it will work better.
The last attempt caused a crash when a tab was cloned after the tab's
loading had been aborted.
Kalle reported that after commit 5c96d430c9,
ELinks would crash if the document in the old tab was still loading when a
new tab was opened. The problem was that the new session's download.data
pointer was not updated to point to the session as doc_loading_callback
expects.
Instead of just calling render_document_frames, set up the download and
call load_uri.
At the end of the destroy_vs there two assignments vs->doc_view->vs = NULL and
vs->doc_view = NULL. In the setup_session the copy_vs left the vs "unbound"
with any variable. At least one of these two is wrong.
C99 6.7.4p3 and 6.7.4p6 set some constraints on what can be done in
inline functions and how they can be declared. In particular, any
function declared inline must also be defined in the same translation
unit. To comply with that, remove inline specifiers from function
declarations in header files when the functions are not also defined
in those header files.
Sun Studio 11 on Solaris 9 is stricter than C99 and does not allow
references to static identifiers in extern inline functions. Make the
configure script detect this and define NONSTATIC_INLINE accordingly
in config.h. Then use that in the definitions of all non-static
inline functions.
Document the restrictions and this scheme in doc/hacking.txt.
In src/session/task.c, if ses_goto() was going to ask the user to
confirm, it did:
task->session_task.target.frame = null_or_stracpy(target_frame);
It added the struct task to a memory_list, so the structure was freed
when the message box was closed. The target frame string was however
never freed. To fix this leak, add the target frame string to the
memory_list too.
Alternatively, this could have been fixed by making post_yes() and
post_no() free the string. It is however a bit better to use the
memory_list because msg_box() frees that even if it is unable to
display the message box.
These functions now expect or return strings in UTF-8:
delete_folder_by_name (sneak in a const, too), bookmark_terminal_tabs,
open_bookmark_folder, and get_auto_save_bookmark_foldername_utf8 (new
function).
Change test/imgmap2.html so it can be used for testing this too.
Debian Iceweasel 3.0.4 does not appear to support such external
client-side image maps. Well, that's one place where ELinks is
superior, I guess. There might be a security problem though if ELinks
were to let scripts of the referring page examine the links in the
image map.
This simplifies the callers a little and may help implement
simultaneous support for different charsets on different terminals
of the same type (bug 1064).
Except if they have external handlers.
When ELinks receives an event from a terminal, move that terminal to
the beginning of the global "terminals" list, so that the terminals
are always sorted according to the time of the most recent use. Note,
this affects the numbering of bookmark folders in session snapshots.
Add get_default_terminal(), which returns the most recently used
terminal that is still open. Use that in various places that
previously used terminals.prev or terminals.next. Four functions
fetch the size of the terminal for User-Agent headers, and
get_default_terminal() is not really right, but neither was the
original code; add TODO comments in those functions.
When the user chooses "Background and Notify", associate the download
with the terminal where the dialog box is. So any later messages will
then appear in that terminal, if it is still open. However, don't
change the terminal if the download has an external handler.
When a download gets some data, don't immediately check the associated
terminal. Instead, wait for the download to end. Then, if the
terminal of the download has been closed, use get_default_terminal()
instead. If there is no default terminal either, just skip any
message boxes.
ELinks attempted to display a message box on file_download.term, but
it had already closed that terminal and freed the struct terminal. To
fix this, reset file_download.term pointers to NULL when the terminal
is about to be destroyed. Also, assert in download_data_store() that
file_download.term is either NULL or in the global "terminals" list.
Reported by أحمد المحمودي.
(cherry picked from commit 6e2476ea4d)
Replace almost all uses of enum connection_state with struct
connection_status. This removes the assumption that errno values used
by the system are between 0 and 100000. The GNU Hurd uses values like
ENOENT = 0x40000002 and EMIG_SERVER_DIED = -308.
This commit is derived from my attachments 450 and 467 to bug 1013.
Conflicts:
NEWS
configure.in
The following files also conflicted, but they had not been manually
edited in the elinks-0.12 branch after the previous merge, so I just
kept the 0.13.GIT versions:
doc/man/man1/elinks.1.in
doc/man/man5/elinks.conf.5
doc/man/man5/elinkskeys.5
po/fr.po
po/pl.po
I am reverting all copiousoutput support because of bug 917.
This reverts commit f6115e65ec.
Conflicts:
src/session/download.h: type_query.cgi, and Doxygen comments.
I am reverting all copiousoutput support because of bug 917.
This reverts commit a2c12d7653.
Conflicts:
src/session/download.c: The int_min vs. int_max change had
already been obsoleted by using safe_strncpy instead,
in commit efcd6c9758 for bug 896 on 2007-07-24.
Also, TERM_EXEC_FG and TERM_EXEC_BG had been added.
I am reverting all copiousoutput support because of bug 917.
This reverts commit 6ead4e9c65.
Conflicts:
src/session/download.c: TERM_EXEC_FG and TERM_EXEC_BG had been
added after the original commit.
I am reverting all copiousoutput support because of bug 917.
This reverts commit 4dc4ea47f2.
Conflicts:
src/network/connection.h: After the original commit, the declaration
of copiousoutput_data had been changed to use the LIST_OF macro.
Also, connection.cgi had been added next to the connection.popen
member added by the original commit.
src/session/download.c: After the original commit, the definition of
copiousoutput_data had been changed to use the INIT_LIST_OF macro.
If the user opens the same file again after it is in the cache, then
ELinks does not always open a new connection, so download->conn can be
NULL in init_type_query(), and download->conn->cgi would crash.
Don't read that, then; instead add a new flag cache_entry.cgi, which
http_got_header() sets or clears as soon as possible after the cache
entry has been created.
(cherry picked from commit 81f8ee1fa2)
CGI scripts are distinguishable from normal files. I hope that this
fixes the bug 991. This commit also reverts the previous revert.
(cherry picked from commit 7ceba1e461)
In setup_session, use copy_location, add_to_history, and
render_document_frames instead of goto_uri and copy_vs to copy the base
tab's view state. By avoiding goto_uri, setup_session now bypasses MIME
checks, form post confirmations, malicious URL checks, and so on when
copying the base tab's current location and view state to the new tab,
so the new tab should get exactly what was loaded in the base tab.
This fixes bug 765: Opening a new tab can ask about the document of the
previous tab.
Previously, init_type_query would check to make sure that it doesn't create a
duplicate type query and would return NULL if it otherwise would create a
duplicate. Then setup_download_handler would return 0 to do_move.
This patch changes setup_download_handler to return 1 to do_move in this
situation so that do_move stops trying to load the document.
This avoid a crash when loading twice the same file in the same tab when
loading the file opens a type query.
If the user opens the same file again after it is in the cache, then
ELinks does not always open a new connection, so download->conn can be
NULL in init_type_query(), and download->conn->cgi would crash.
Don't read that, then; instead add a new flag cache_entry.cgi, which
http_got_header() sets or clears as soon as possible after the cache
entry has been created.
CGI scripts are distinguishable from normal files. I hope that this
fixes the bug 991. This commit also reverts the previous revert.
(cherry picked from commit 7ceba1e461)
This reverts commit 7ceba1e461,
which is causing an assertion to fail if I open the same PDF
twice in a row, even if I cancel the dialog box when ELinks
first asks which program to run:
INTERNAL ERROR at /home/Kalle/src/elinks-0.12/src/session/download.c:980: assertion download && download->conn failed!
Forcing core dump! Man the Lifeboats! Women and children first!
But please DO NOT report this as a segfault!!! It is an internal error, not a
normal segfault, there is a huge difference in these for us the developers.
Also, noting the EXACT error you got above is crucial for hunting the problem
down. Thanks, and please get in touch with us.
Program received signal SIGSEGV, Segmentation fault.
[Switching to Thread -1216698688 (LWP 17877)]
0xb7a02d76 in raise () from /lib/libc.so.6
(gdb) backtrace 6
at /home/Kalle/src/elinks-0.12/src/util/error.c:179
fmt=0x816984c "assertion download && download->conn failed!")
at /home/Kalle/src/elinks-0.12/src/util/error.c:122
cached=0x8253ca8) at /home/Kalle/src/elinks-0.12/src/session/download.c:980
cached=0x8253ca8, frame=0)
at /home/Kalle/src/elinks-0.12/src/session/download.c:1339
at /home/Kalle/src/elinks-0.12/src/session/task.c:493
(More stack frames follow...)
There is a fix available but I don't trust it yet.
This reverts commit d0be89a16c, and thus
restores the ELinks 0.11 behaviour: always copy the data to a
temporary file before passing it to a MIME handler, even if the
"file:" URI scheme is being used. Previously, ELinks 0.12.GIT passed
the name of the original file directly to the handler. That was more
efficient but unfortunately gave the wrong result with local CGI.
The commit being reverted also claims to partially fix bug 238
(caching of local files). That bug is still open.
Currently, when ELinks passes the name of a local file to an external
MIME handler program, it encodes the name as a URI. Programs
typically do not expect this, and they then fail to open the file.
This patch makes ELinks instead quote the file name for the shell.
(The patch was attachment 425 of bug 991, by Witold Filipczyk.
This commit message was written by Kalle Olavi Niemitalo.)
After copying the base session's viewstate, restore the ses->doc_view->vs
pointer.
This follows up on commit 65321923b9:
In setup_session, copy the viewstate for the new session from the base
session.
This fixes bug 977: When opening a javascript: link in a new tab, an
assertion on ses->doc_view->vs in ecmascript_protocol_handler would fail.
In init_remote_session, pass open_uri_in_new_tab a false argument for the based parameter so that the new tab does not get the old tabs current location in its history.
start_document_refreshes() performs the NULL-pointer checks that
previously all callers to start_document_refresh() must perform
and then calls start_document_refresh().
start_document_refreshes performs the NULL-pointer checks that previously all callers to start_document_refresh must perform and then calls start_document_refresh.
Pass the session with some get_opt_* calls. These are the low-hanging fruit. Some places will be difficult because we don't have the session or for other reasons.
This cleans up and changes the calling convention of
load_additional_file(), so that it now grab its own doc_view using
current_frame() and the struct session pointer in the file_to_load
object. By always looking up the current frame, corruption of doc_view
due to rerendering of the upper frame document is avoided.
The fix extends commit 6afdbf608f by
Witold, which moved the getting of doc_view in the other caller of
load_additional_file(). The additional clean up ensures that any future
users of load_additional_file() will not reintroduce a similar bug.
A possible future optimization would be to change load_additional_file()
to take the referrer as an argument.
Use it for the actual I/O only. Previously, defining CONFIG_UTF8 and
enabling UTF-8 used to force many strings to the UTF-8 charset
regardless of the terminal charset option. Now, those strings always
follow the terminal charset. This fixes bug 914 which was caused
because _() returned strings in the terminal charset and functions
then assumed they were in UTF-8. This reduction in the effects of
UTF-8 I/O may also simplify future testing.
The code works both with copiousoutput and without it.
[ Part 1/2 of commit c25c41bd18 on the
witekfl branch. I'm leaving out the part that depends on commit
469481b272, which is not yet safe to
apply. --KON ]
the handler reads data from stdin. I think it only works with copiousoutput.
[ Part 1/2 of commit 4a7b9415e1 on the
witekfl branch, fixes bug 916. I'm leaving out delayed_goto_uri()
for now because I don't understand its purpose. --KON ]
Don't cast function pointers; calling functions via pointers of
incorrect types is not guaranteed to work. Instead, define the
functions with the desired types, and make them cast the incoming
parameters. Or define wrapper functions if the return types don't
match.
really_exit_prog wasn't being used outside src/dialogs/menu.c,
and I had to change its parameter type, so it's now static.
The configure script no longer recognizes "CONFIG_UTF_8=yes" lines
in custom features.conf files. They will have to be changed to
"CONFIG_UTF8=yes". This incompatibility was deemed acceptable
because no released version of ELinks supports CONFIG_UTF_8.
The --enable-utf-8 option was not renamed.
using magic ;)
Now in resume mode connection is always interrupted
and resumed. Even when all file is downloaded from beginning
conection will be resumed from old end of file. Feel free to fix it.
at least under Linux. I didn't test network part of external handlers.
Files in tmpdir must be delete somehow. Maybe make a list of files
to unlink and delete them while quitting ELinks.
copiousoutput III. It works only for local files, but you must remove
| /usr/bin/less
yourself and allow reading special files, and set default mime type
as text/plain for convenience.
Don't replace UTF-8 bytes with '*'. Probably there is need to do better
check what will be displayed.
Also get_current_link_title is no longer pretty and trivial. (o:
With commit 637f1e82e6 ('NET: Merge
change_connection into cancel_download'), cancel_download returns
immediately if the connection is not in a result state, so save some
code by not checking is_in_progress_state before calling cancel_download.
First the patch makes sure doc_loading_callback is always called from
tp_display even if the download is in result state. This is often the
case for local files that the user decides to display via the WTD dialog.
Furthermore, improve the adding to globhist part of doc_loading_callback,
so that it works also for downloads in result state where the
download->conn member is NULL. In addition to grabbing the URI from the
connection try also the cache entry if it is set.
Fixes: bug 355 (Documents displayed via WTD aren't added to globhist)
This simplifies unqueuing of downloads and makes it more obvious that
the 'change' being performed is to migrate or replace an old download
handle with a new one.
Until the last change in src/ecmascript/see/window.c, the two copies
of delayed_goto_uri_frame in src/ecmascript/spidermonkey/window.c and
in src/ecmascript/see/window.c were identical. That change applies to
both versions, so move the newer one to src/session/task.c and eliminate
the duplication. Also move struct delayed_open to src/session/session.h.
This changes the init target to be idempotent: most importantly it will now
never overwrite a Makefile if it exists. Additionally 'make init' will
generate the .vimrc files. Yay, no more stupid 'added fairies' commits! ;)
the same accelerator key to multiple buttons in a dialog box or
to multiple items in a menu. ELinks already has some support for
this but it requires the translator to run ELinks and manually
scan through all menus and dialogs. The attached changes make it
possible to quickly detect and list any conflicts, including ones
that can only occur on operating systems or configurations that
the translator is not currently using.
The changes have no immediate effect on the elinks executable or
the MO files. PO files become larger, however.
The scheme works like this:
- Like before, accelerator keys in translatable strings are
tagged with the tilde (~) character.
- Whenever a C source file defines an accelerator key, it must
assign one or more named "contexts" to it. The translations in
the PO files inherit these contexts. If multiple strings use
the same accelerator (case insensitive) in the same context,
that's a conflict and can be detected automatically.
- The contexts are defined with "gettext_accelerator_context"
comments in source files. These comments delimit regions where
all translatable strings containing tildes are given the same
contexts. There must be one special comment at the top of the
region; it lists the contexts assigned to that region. The
region automatically ends at the end of the function (found
with regexp /^\}/), but it can also be closed explicitly with
another special comment. The comments are formatted like this:
/* [gettext_accelerator_context(foo, bar, baz)]
begins a region that uses the contexts "foo", "bar", and "baz".
The comma is the delimiter; whitespace is optional.
[gettext_accelerator_context()]
ends the region. */
The scripts don't currently check whether this syntax occurs
inside or outside comments.
- The names of contexts consist of C identifiers delimited with
periods. I typically used the name of a function that sets
up a dialog, or the name of an array where the items of a
menu are listed. There is a special feature for static
functions: if the name begins with a period, then the period
will be replaced with the name of the source file and a colon.
- If a menu is programmatically generated from multiple parts,
of which some are never used together, so that it is safe to
use the same accelerators in them, then it is necessary to
define multiple contexts for the same menu. link_menu() in
src/viewer/text/link.c is the most complex example of this.
- During make update-po:
- A Perl script (po/gather-accelerator-contexts.pl) reads
po/elinks.pot, scans the source files listed in it for
"gettext_accelerator_context" comments, and rewrites
po/elinks.pot with "accelerator_context" comments that
indicate the contexts of each msgid: the union of all
contexts of all of its uses in the source files. It also
removes any "gettext_accelerator_context" comments that
xgettext --add-comments has copied to elinks.pot.
- If po/gather-accelerator-contexts.pl does not find any
contexts for some use of an msgid that seems to contain an
accelerator (because it contains a tilde), it warns. If the
tilde refers to e.g. "~/.elinks" and does not actually mark
an accelerator, the warning can be silenced by specifying the
special context "IGNORE", which the script otherwise ignores.
- msgmerge copies the "accelerator_context" comments from
po/elinks.pot to po/*.po. Translators do not edit those
comments.
- During make check-po:
- Another Perl script (po/check-accelerator-contexts.pl) reads
po/*.po and keeps track of which accelerators have been bound
in each context. It warns about any conflicts it finds.
This script does not access the C source files; thus it does
not matter if the line numbers in "#:" lines are out of date.
This implementation is not perfect and I am not proposing to
add it to the main source tree at this time. Specifically:
- It introduces compile-time dependencies on Perl and Locale::PO.
There should be a configure-time or compile-time check so that
the new features are skipped if the prerequisites are missing.
- When the scripts include msgstr strings in warnings, they
should transcode them from the charset of the PO file to the
one specified by the user's locale.
- It is not adequately documented (well, except perhaps here).
- po/check-accelerator-contexts.pl reports the same conflict
multiple times if it occurs in multiple contexts.
- The warning messages should include line numbers, so that users
of Emacs could conveniently edit the conflicting part of the PO
file. This is not feasible with the current version of
Locale::PO.
- Locale::PO does not understand #~ lines and spews warnings
about them. There is an ugly hack to hide these warnings.
- Jonas Fonseca suggested the script could propose accelerators
that are still available. This has not been implemented.
There are three files attached:
- po/gather-accelerator-contexts.pl: Augments elinks.pot with
context information.
- po/check-accelerator-contexts.pl: Checks conflicts.
- accelerator-contexts.diff: Makes po/Makefile run the scripts,
and adds special comments to source files.
instead of the URI, content, and length of the entry. Change the hooks
to use add_fragment. This should fix the memory leakage when multiple
hooks change the same document, closing bug 703.
It is an internally supported protocol, so it should be all internal. The
other thing was just causing headacks. Thanks to Neuromancer for suggesting
not to endeavor into another configuration nightmare. And thanks to arcatan
for requesting this for the n-th time. ;)
Ditch the building of an archive (.a) in favour of linking all objects in a
directory into a lib.o file. This makes it easy to link in subdirectories
and more importantly keeps the build logic in the local subdirectories.
Note: after updating you will have to rm **/*.a if you do not make clean
before updating.
All objects defining $(OBJS) will get them and *.a deleted during
make clean.
The all, clean and install rules now implicitly imply their -recursive
counterparts - those will just do nothing in case of $(SUBDIRS) not
defined, so that's ok.
The root makefile is converted as well as some leaf Makefiles. This
also brings in the required infrastructure and adjusts configure.in
appropriately.
I converted only makefiles containing no configurable stuff, since
that'll require more consideration yet.