The uri of the latest closed tab uri is remembered in struct terminal.
And when the reopen-last-closed-tab action is executed, then uri
is open in new tab in foreground. Only one is in memory.
If you close two tabs, only on one of them can be reopened.
No key is assigned to this action by default.
With document.browse.accesskey.priority = 0, accesskeys were ignored if
the current tab was not the last (rightmost) tab. This commit fixes the
problem.
Add a function tabs_are_on_top(struct terminal *) which returns
a Boolean value indicating whether the topmost window is a tab (as
opposed to, e.g., a menu).
This commit fixes commit 1bd498cde9.
C99 6.7.4p3 and 6.7.4p6 set some constraints on what can be done in
inline functions and how they can be declared. In particular, any
function declared inline must also be defined in the same translation
unit. To comply with that, remove inline specifiers from function
declarations in header files when the functions are not also defined
in those header files.
Sun Studio 11 on Solaris 9 is stricter than C99 and does not allow
references to static identifiers in extern inline functions. Make the
configure script detect this and define NONSTATIC_INLINE accordingly
in config.h. Then use that in the definitions of all non-static
inline functions.
Document the restrictions and this scheme in doc/hacking.txt.
Pass the session with some get_opt_* calls. These are the low-hanging fruit. Some places will be difficult because we don't have the session or for other reasons.
Don't cast function pointers; calling functions via pointers of
incorrect types is not guaranteed to work. Instead, define the
functions with the desired types, and make them cast the incoming
parameters. Or define wrapper functions if the return types don't
match.
really_exit_prog wasn't being used outside src/dialogs/menu.c,
and I had to change its parameter type, so it's now static.
To reproduce:
- Start ELinks.
- Enable the ui.tabs.wraparound option.
- Press t to open a second tab.
- Go to http://elinks.cz/ in the second tab.
- Press 3< to step three tabs to the left.
In the statement "tab = tabs + tab % tabs;", tab == -2 and tabs == 2.
So tab % tabs == 0 and tab becomes 2, which is out of range.
The new version calls get_opt_bool even if the tab parameter is already in
range, but the cost should be negligible compared to the redraw_terminal()
call that follows.
Reported by Jonas Fonseca.
Also add an empty line above the label in init_tab; but there are
still several labels elsewhere that don't have empty lines above them.
Decrement term->current_tab before calling delete_window() instead of after
deleting all backgrounded tabs, so get_tab_by_number() will see a
consistent value.
src/terminal/tab.c (get_tab_by_number): Assert that the returned
struct window * actually points to a struct window.
src/terminal/tab.c (move_current_tab): Keep tabs contiguous in the
stack of windows. Obey "ui.tabs.wraparound".
src/terminal/terminal.h (struct terminal): Documented that tabs can
move in the stack.
src/terminal/window.c (assert_window_stacking): Check that the main
menu isn't between tabs.
This fixes the bug that tabs opened with -remote used to hide existing
dialogs, which then became unusable until the new tabs were closed.
src/terminal/tab.c (init_tab): Put the new tab immediately above
existing ones, or if it's the first one, then at the bottom of the stack.
Added assertions.
src/terminal/terminal.h (struct terminal): Redocumented the stacking
order of windows.
src/terminal/window.c [CONFIG_DEBUG] (assert_window_stacking): New function.
src/terminal/window.h (assert_window_stacking): New function or no-op macro.
The two copies of delayed_open in src/ecmascript/spidermonkey/window.c
and in src/ecmascript/see/window.c are identical, so move them
to src/terminal/tab.c and eliminate the duplication.
the same accelerator key to multiple buttons in a dialog box or
to multiple items in a menu. ELinks already has some support for
this but it requires the translator to run ELinks and manually
scan through all menus and dialogs. The attached changes make it
possible to quickly detect and list any conflicts, including ones
that can only occur on operating systems or configurations that
the translator is not currently using.
The changes have no immediate effect on the elinks executable or
the MO files. PO files become larger, however.
The scheme works like this:
- Like before, accelerator keys in translatable strings are
tagged with the tilde (~) character.
- Whenever a C source file defines an accelerator key, it must
assign one or more named "contexts" to it. The translations in
the PO files inherit these contexts. If multiple strings use
the same accelerator (case insensitive) in the same context,
that's a conflict and can be detected automatically.
- The contexts are defined with "gettext_accelerator_context"
comments in source files. These comments delimit regions where
all translatable strings containing tildes are given the same
contexts. There must be one special comment at the top of the
region; it lists the contexts assigned to that region. The
region automatically ends at the end of the function (found
with regexp /^\}/), but it can also be closed explicitly with
another special comment. The comments are formatted like this:
/* [gettext_accelerator_context(foo, bar, baz)]
begins a region that uses the contexts "foo", "bar", and "baz".
The comma is the delimiter; whitespace is optional.
[gettext_accelerator_context()]
ends the region. */
The scripts don't currently check whether this syntax occurs
inside or outside comments.
- The names of contexts consist of C identifiers delimited with
periods. I typically used the name of a function that sets
up a dialog, or the name of an array where the items of a
menu are listed. There is a special feature for static
functions: if the name begins with a period, then the period
will be replaced with the name of the source file and a colon.
- If a menu is programmatically generated from multiple parts,
of which some are never used together, so that it is safe to
use the same accelerators in them, then it is necessary to
define multiple contexts for the same menu. link_menu() in
src/viewer/text/link.c is the most complex example of this.
- During make update-po:
- A Perl script (po/gather-accelerator-contexts.pl) reads
po/elinks.pot, scans the source files listed in it for
"gettext_accelerator_context" comments, and rewrites
po/elinks.pot with "accelerator_context" comments that
indicate the contexts of each msgid: the union of all
contexts of all of its uses in the source files. It also
removes any "gettext_accelerator_context" comments that
xgettext --add-comments has copied to elinks.pot.
- If po/gather-accelerator-contexts.pl does not find any
contexts for some use of an msgid that seems to contain an
accelerator (because it contains a tilde), it warns. If the
tilde refers to e.g. "~/.elinks" and does not actually mark
an accelerator, the warning can be silenced by specifying the
special context "IGNORE", which the script otherwise ignores.
- msgmerge copies the "accelerator_context" comments from
po/elinks.pot to po/*.po. Translators do not edit those
comments.
- During make check-po:
- Another Perl script (po/check-accelerator-contexts.pl) reads
po/*.po and keeps track of which accelerators have been bound
in each context. It warns about any conflicts it finds.
This script does not access the C source files; thus it does
not matter if the line numbers in "#:" lines are out of date.
This implementation is not perfect and I am not proposing to
add it to the main source tree at this time. Specifically:
- It introduces compile-time dependencies on Perl and Locale::PO.
There should be a configure-time or compile-time check so that
the new features are skipped if the prerequisites are missing.
- When the scripts include msgstr strings in warnings, they
should transcode them from the charset of the PO file to the
one specified by the user's locale.
- It is not adequately documented (well, except perhaps here).
- po/check-accelerator-contexts.pl reports the same conflict
multiple times if it occurs in multiple contexts.
- The warning messages should include line numbers, so that users
of Emacs could conveniently edit the conflicting part of the PO
file. This is not feasible with the current version of
Locale::PO.
- Locale::PO does not understand #~ lines and spews warnings
about them. There is an ugly hack to hide these warnings.
- Jonas Fonseca suggested the script could propose accelerators
that are still available. This has not been implemented.
There are three files attached:
- po/gather-accelerator-contexts.pl: Augments elinks.pot with
context information.
- po/check-accelerator-contexts.pl: Checks conflicts.
- accelerator-contexts.diff: Makes po/Makefile run the scripts,
and adds special comments to source files.
