If doc_view->document->number_of_search_points is 0, move_search_number
crashes at:
pt = doc_view->document->search_points;
x = pt[number].x;
y = pt[number].y;
so it is not sufficient to make find_first_search_in_view return
immediately in this case, move_search_do should return immediately.
Before only visible part of screen was searched for pattern.
Now whole document is searched, and beginings of found text
is remembered in document->search_points.
This legacy header appears to be unused. Removing its includes
avoids numerous warnings when compiling with musl libc:
/usr/include/sys/signal.h:1:2: warning: #warning redirecting incorrect #include <sys/signal.h> to <signal.h> [-Wcpp]
Option document.browse.preferred_document_width controls the
width of the document, so that documents are rendered with narrower
width than screen width. Makes it easier to read paragraphs.
Patch originally from Shalon Wood <dstar@pele.cx>, see bug #1063.
Instead of using max_document_width as the hard limit to the document
width, it uses a soft limit, where if the document does not fit (due to
tables, etc.), then larger width is used. This reduces the need for
horizontal scrolling for wide documents.
Also added toggle-document-width action to toggle between preferred
width and full screen width. This is bound to 'M' by default. Initial
toggle status is determined by document.browse.use_preferred_document_width
option.
During dumps, document.dump.width option is still used. Perhaps we
should consolidate document.dump.width option with
document.browse.preferred_document_width ?
The color is controlled by
document.browse.links.active_link.insert_mode_colors.background
document.browse.links.active_link.insert_mode_colors.text
Also avoid overloading local variable "i" in get_current_link().
These settings are specified by
document.colors.link_number
document.colors.use_link_number_color
The latter setting determines whether the color is used when document
colors are being used.
See bug #1050.
If this function is available and gnutls is used,
and connection.ssl.trusted_ca_file is "",
gnutls_certificate_set_x509_system_trust is called
to load certificates.
When a mailcap entry with a testcommand containing %s is encountered, it is ignored. The
entry was freed, but not set to NULL, leading to a segfault later on.
This prevents links with null selectors being interpreted as pointing to
a (likely non-existent) file gopher://server/1
An example of a page with such links: gopher://gopher.floodgap.com/1/new
If there are isolated combining characters, e.g. at the beginning of a paragraph
or table cell:
– if it’s not the first screen column, combine them with whatever character is
printed to their left;
– otherwise, add a no-break space as the base character.
Previously, such combining characters were combined with the last letter
displayed, i.e. the last letter of the previous paragraph or cell.
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
without waiting for the next non zero width character. This way combining
characters at the end of the document are displayed.
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
Otherwise, there are unnecessary spaces at the end of lines in tables containing
combining characters.
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
A combining character sequence where the base character is a space remained
recorded as a space although the initial space was replaced with an internal
code corresponding to the combined character. This caused an internal error when
ELinks tried to split the line at that place and did not find the space.
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
Otherwise, the verification fails when using a HTTPS proxy because ELinks checks
whether the proxy matches the certificate.
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
I didn’t respect the right order when I added the functions to move up and down
by half a page a few years ago.
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
Use the same functions as for the list-style property since only the "type" part
of the list-style property is supported at this stage.
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
* Rename P_STAR as P_DISC and P_PLUS as P_SQUARE.
* Delete P_NONE because it was used only as the default flag in init_html_parser
and a list with P_NONE then got bullets, so instead use P_DISC by default (as
per the CSS specification), and P_NO_BULLET for lists with no bullets.
* Use as bullets the characters:
- U+25E6 WHITE BULLET for the circle style;
- U+25AA BLACK SMALL SQUARE (alias square bullet) for the square style;
- U+2022 BULLET for the disc style (default).
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
By default some Python warning messages would be written to standard error
by the interpreter. To prevent these warnings from making a mess of the
ELinks screen, all warnings were turned into exceptions so they could be
caught and displayed through the usual report_scripting_error() mechanism.
With Python 3.2, this approach backfires: A new class of ResourceWarnings
that are filtered by default (and hence would *not* have been written to
standard error) are now turned into exceptions, and these exceptions can't
be caught because they're emitted from the interpreter's cleanup code. As
a result, the uncaught exceptions would make a mess of the ELinks screen.
The new solution is to replace Python's standard library function
warnings.showwarning() with one that turns warning messages into exceptions.
This means we'll wait until a warning would have been written to standard
error before turning it into an exception, so other warnings that would
never have reached that point because they're filtered will remain unseen.
(The behavior of warning messages is described in the documentation for
the "warnings" module from Python's standard library.)
There was hardcoded 4096 for threads size, but below there was:
assertm(fd >= 0 && fd < FD_SETSIZE,
"get_handler: handle %d >= FD_SETSIZE %d",
fd, FD_SETSIZE);
if_assert_failed return NULL;
which fails for fd > 1024 (1024 was previous value of FD_SETSIZE)
DELETED:
* dumb {b}, smart {bb, bb_fr_en, bb_en_fr}: Redirects to Microsoft
Translator, which I can't get to work without JavaScript. Deleted.
* dumb {pyhelp}, smart {py, pydev}: Deleted as recommended by the
author of the CGI script.
* dumb {pyvault, lyrics}, smart {pyvault}: Can't find a new URL for the
service. Deleted.
* smart {gd}: Google Directory has been shut down. Deleted.
* smart {sd, sdc, sdu, sdp, sdj, whatis}: These don't seem to work
without JavaScript. Deleted.
* smart {id, draft}: The search still exists but I can't get it to
take the words from the URL. Deleted.
UPDATED:
* dumb {cia}: Had changed its URL, and the service is down, but they
intend to restore it. Updated and kept.
* dumb {lua}: ELinks no longer supports Lua 4.0. Changed to 5.1 as
installed by Debian.
* smart {cliki, foldoc, gwho, gwhat, gwhere, gwhen, a, imdb, wn, fsd,
rfcs, cr}: Updated URLs.
Each C function that can be called as a method of an ECMAScript object
is typically listed in a spidermonkeyFunctionSpec array and has a
comment that shows the name of the array and the name of the method.
For example, elinks_alert has a comment /* @elinks_funcs{"alert"} */
because elinks_funcs[] contains an element { "alert", elinks_alert, 1 }.
When some of those functions were split into outer and inner functions
for SpiderMonkey 1.8.5 compatibility, the comments were attached to
the inner functions, which contain the bulk of the code. Move the
comments to the outer functions, to which the array elements point.
Partially revert commits
a1c5fe51 (2011-05-08) bookmark_folder_get_property: xulrunner-2.0 fix
e86ec567 (2012-03-04) Compilation fixes (--enable-debug)
jsval_to_bookmark_string once again takes jsval val, rather than jsid id.
This way, bookmark_set_property does not have to call JS_ValueToId,
which would needlessly intern the new string value of the property,
i.e. the title or the URI. Instead, bookmark_folder_get_property
has to call JS_IdToValue.
forms_item declared a variable (jsval val), passed its address to
forms_item2, and set it as the return value. However, forms_item2
could return without initializing the jsval, especially if given too
many arguments. Fix by initializing to JSVAL_VOID right away.
I'm not sure that is the correct value to return in such cases,
but at least it's better than risking a crash.
Likewise in form_elements_item and form_elements_namedItem.
Fix this warning:
Generating docs for page todo...
todo:12: warning: explicit link request to 'url' could not be resolved
The #url syntax was supposed to refer to the url member of the
containing structure, but it apparently doesn't work when @todo
copies the paragraph to a separate page.
Doxygen warned that <uri> is an unsupported xml/html tag.
It was not intended as a tag though; rather as a placeholder
akin to <var>uri</var>. Escape with a backslash.
In almost all calls to parse_header, the second argument is a string
literal: parse_header(head, "Charset", NULL) for example.
Of course, parse_header does not write to that string. Accordingly,
make the parameter point to const, so calls that use a variable rather
than a string literal can make that variable point to const too.
Leaving the other parameters non-const for now.
http_negotiate_parse_data passed &token->length as the int *outlen
parameter of base64_decode_bin, which stores an int at that location.
However, gss_buffer_desc::length is size_t in all implementations that
I checked: MIT Kerberos Version 5 Release 1.10, libgssglue 0.4, and
GNU GSS 1.0.2. This mismatch could cause the build to fail:
.../src/protocol/http/http_negotiate.c: In function ‘http_negotiate_parse_data’:
.../src/protocol/http/http_negotiate.c:173:2: error: passing argument 3 of ‘base64_decode_bin’ from incompatible pointer type [-Werror]
In file included from .../src/protocol/http/http_negotiate.c:30:0:
.../src/util/base64.h:8:16: note: expected ‘int *’ but argument is of type ‘size_t *’
On 64-bit big-endian hosts, it might also cause the GSSAPI
implementation to read too much data from memory and disclose it to
some network server, or crash ELinks.
(cherry picked from elinks-0.12 commit d33c807dd9)
unregister_options() requires as a sentinel an instance of struct
option where option.name is NULL. However, the NULL_OPTION_INFO macro
used for these sentinels actually initializes a struct option_init
instead. Make register_options() overwrite the NULL_OPTION_INFO with
a sentinel in the correct format. This probably makes a difference
only on platforms where null pointers don't have all bits zero.
(cherry picked from elinks-0.12 commit 8ac10e00d4)
l_set_option() was passing the address of an int to
option_types[OPT_INT].set and option_types[OPT_BOOL].set.
That looks correct but is not: both function pointers
point to num_set(), which actually reads *(long *) str.
Change l_set_option() to pass the address of a long instead,
and add comments about this dependency.
(cherry picked from elinks-0.11 commit 8766e3829f)
(cherry picked from elinks-0.12 commit 0797f04921)
ELinks already allowed '+' and '*' in the names of options when
reading a configuration file. The option manager however didn't
let the user add such options. Allow the characters there too.
These characters are needed especially in the mime.type tree,
where '*' is used as a replacement for '.'. For example:
set mime.type.audio.prs*sid = "sid"
set mime.type.application.atom+xml = "atom"
This commit changes one gettextised string.
(cherry picked from elinks-0.12 commit 064ff3921d)
No changes in program logic or data layout.
(cherry picked from elinks-0.12 commit 972afa1c26)
Conflicts:
src/config/options.c:
0.13.GIT has a new function get_option_shadow, now
doxygenized likewise.
INIT_OPTION used to initialize union option_value at compile time by
casting the default value to LIST_OF(struct option) *, which is the
type of the first member. On sparc64 and other big-endian systems
where sizeof(int) < sizeof(struct list_head *), this tended to leave
option->value.number as zero, thus messing up OPT_INT and OPT_BOOL
at least. OPT_LONG however tended to work right.
This would be easy to fix with C99 designated initializers,
but doc/hacking.txt says ELinks must be kept C89 compatible.
Another solution would be to make register_options() read the
value from option->value.tree (the first member), cast it back
to the right type, and write it to the appropriate member;
but that would still require somewhat dubious conversions
between integers, data pointers, and function pointers.
So here's a rather more invasive solution. Add struct option_init,
which is somewhat similar to struct option but has non-overlapping
members for different types of values, to ensure nothing is lost
in compile-time conversions. Move unsigned char *path from struct
option_info to struct option_init, and replace struct option_info
with a union that contains struct option_init and struct option.
Now, this union can be initialized with no portability problems,
and register_options() then moves the values from struct option_init
to their final places in struct option.
In my x86 ELinks build with plenty of options configured in, this
change bloated the text section by 340 bytes but compressed the data
section by 2784 bytes, presumably because union option_info is a
pointer smaller than struct option_info was.
(cherry picked from elinks-0.12 commit e5f6592ee2)
Conflicts:
src/protocol/fsp/fsp.c: All options had been removed in 0.13.GIT.
src/protocol/smb/smb2.c: Ditto.
Fix this GCC 3.4.6 warning, which becomes an error
if configure --enable-debug adds -Werror to CFLAGS:
[CC] src/document/css/apply.o
In file included from /home/Kalle/src/elinks-0.12/src/document/html/internal.h:6,
from /home/Kalle/src/elinks-0.12/src/document/css/apply.c:35:
/home/Kalle/src/elinks-0.12/src/document/html/parser.h:149: warning: parameter has incomplete type
In file included from /home/Kalle/src/elinks-0.12/src/document/css/apply.c:35:
/home/Kalle/src/elinks-0.12/src/document/html/internal.h:125: warning: parameter has incomplete type
Even without this warning, "enum html_special_type;"
would not be standard C89.
(cherry picked from elinks-0.12 commit c9f487cdf4)
Conflicts:
src/document/html/parser.h: 0.13.GIT had more #includes already.
Call get_window_title() at most once per terminal, even if it fails.
If ELinks is configured with X11 support, get_window_title() calls
XOpenDisplay(), which can sleep if $DISPLAY does not respond.
This delay was previously incurred every time ELinks changed the
title. Besides, if ELinks had already changed the title, setting
ditrm->orig_title = get_window_title(); did not make sense anyway.
(cherry picked from elinks-0.12 commit 5d4beadc4b)
Conflicts:
src/terminal/kbd.c:
get_window_title has a codepage parameter in 0.13.GIT.
(cherry picked from elinks-0.12 commit 51dc3beee7)
Conflicts:
NEWS: Both 0.12pre5.GIT and 0.13.GIT had inserted a new section.
src/terminal/window.c: Both had inserted a new function.
... and mention that URI rewriting rules may leak ELinks' identity
in the documentation of protocol.http.user_agent.
Originally requested at <https://bugzilla.redhat.com/856348>.
This reverts commit d06cccffd6.
Some people wants URL in the title bar, but some wants the title.
I restored previous version (the title). If you want the URL, create
the patch with a configurable option.
The long term goal is good looking of the Python docs in ELinks, especially
background colors. Every start tag and every text node would have associated
a natural number. Those numbers would be "drawn" in the document instead
of colors. Finally, the screen driver would change numbers into colors.
This will be done in small steps. The next step is to implement this change
in the screen driver.
Add a case for CSS_LIST_ORDINAL (and assert(0)) to the switch in
css_apply_list_style. This change should eliminate a warning from the
compiler reported by Witold that CSS_LIST_ORDINAL is not handled.
Before this change, exec_later allocates memory for the struct exec_mailcap
structure using calloc. However, the memory is freed in
exec_mailcap_command using mem_free. Change exec_later to use mem_calloc
instead of calloc.
Unless CONFIG_FASTMEM is used, mem_free expects to find debugging metadata
that only the mem_alloc family of functions store, and thus using mem_free
on the memory allocated using calloc causes a crash.
Add terminal_class, which defines a JSObject wrapper for struct terminal.
Add terminal_array_class, which defines a JSObject wrapper for accessing
the "terminals" linked list of struct terminal.
Add session_array_class, which defines a JSObject wrapper for accessing the
tabs (sessions) of a terminal.
Add pointers from struct terminal to the terminal_class object and
the session_array_class object.
Add terminal_props and terminal_get_property for terminal_class.
Add terminal_finalize, which clears the pointers between a struct terminal
and the JSObject wrapper in question.
Add smjs_init_terminal_interface, which creates a terminal_array_class
instance and assigns it to the "terminal" property on the "elinks" object.
Call smjs_init_terminal_interface from smjs_init_elinks_object.
Add smjs_get_terminal_object and smjs_get_session_array_object to get
the wrapper objects for a given struct terminal, and add
smjs_get_terminal_array_object to get a terminal_array_class object.
Add smjs_detach_terminal_object and smjs_detach_session_array_object, which
clear the pointers between a given struct terminal and its JSObject
wrappers.
Add terminal_array_get_property for terminal_array_class.
Add session_array_get_property for session_array_class.
Add session_class, which defines a JSObject wrapper for struct session.
Add location_array_class, which defines a JSObject wrapper for struct
ses_history. The "history" member of struct session is a struct
ses_history, which is a linked list of struct location.
Add a pointer from struct session to the session_class object and the
location_array object.
Add smjs_get_session_object to return a session_class JSObject wrapper for
a given struct session.
Add smjs_get_session_location_array_object to return a location_array_class
JSObject wrapper for a given struct session.
Add "session" property to the "elinks" object, which uses
smjs_get_session_object to get a JSObject wrapper for smjs_ses.
Add smjs_location_array_get_property, which allows indexing
a location_array object using a positive number for history forward or
a negative number for history backward.
Add session_props, session_get_property, session_set_property,
session_funcs, smjs_session_goto_url (which implements the "goto" method),
and smjs_init_session_interface for session_class.
Add session_construct, which creates a new tab and returns the JSObject
session_class wrapper.
Add session_finalize and smjs_location_array_finalize, which clear the
pointers between struct session and the JSObject wrappers in question.
Add smjs_detach_session_object, which clears the pointers between a given
struct session and the corresponding JSObject wrappers.
In destroy_session, call smjs_detach_session_object.
Add jsval_to_object helper in ecmascript/spidermonkey/util.h;
jsval_to_object is used in smjs_session_goto_url.
Modify delayed_goto_uri_frame to allow the target to be NULL.
smjs_session_goto_url needs this modification.
Currently, it is possible for the JSObject that wraps a struct view_state
to outlive the view_state. Using the properties of the JSObject wrapper
will then cause a crash.
This patch adds a smjs_detach_view_state_object function, which is called
in destroy_vs, to dissociate the struct view_state from the JSObject
wrapper. To this end, the patch modifies the struct view_state to point
the JSObject wrapper. smjs_get_view_state_object will use this pointer
if it is set, and copy_vs will copy this pointer to the new view_state.
The patch also modifies view_state_get_property and
view_state_set_property to return immediately if the view_state has been
destroyed. Finally, the patch adds a finalizer (view_state_finalize)
that clears the pointer from the struct view_state to the JSObject.
After recent simplifications, the jsobj variable is no longer necessary.
Instead of assigning it a value and then returning it, just return the
value that was being assigned to it.
Add elinks_get_property and elinks_set_property functions and
a JSPropertySpec elinks_props table to handle properties rather than
defining eilnks_get_home, elinks_get_location, and elinks_set_location
and adding them individually to the class using JS_DefineProperty.
This approach will make it easier to add further properties.
Currently, elinks_alert assumes that smjs_ses is not NULL and crashes if
it is. Change elinks_alert to check whether smjs_term is NULL, try
get_default_terminal if so, and fall back on printing to stderr using
usrerror if no terminal is found.
In smjs_load_uri, check whether the the given URI string is empty. If it
is, return JS_FALSE right away rather than continuing on and passing
get_uri an empty string, which triggers an assertion failure later on.
read_http_post_inline decodes two hexadecimal digits into one byte at
a time, and it asserts that each hexadecimal digit is valid; however,
both assertions print the first digit when they fail. Fix the assertion
on the second digit to print the second digit.
Currently, the function try_form_insert_mode checks whether the current
link is a text area, insert mode is off, and the current action is enter,
and if so, it sets insert mode on. Perform this work in enter instead,
and delete try_form_insert_mode.
The old code works as follows: send_kbd_event → send_to_frame
→ frame_ev → frame_ev_kbd → try_form_insert_mode. The new code works
as follows: send_kbd_event → do_action → enter.
Currently, using smjs_load_uri on javascript: URIs cause an assertion
failure in run_connection because smjs_load_uri uses
get_protocol_handler to find the handler and asserts that the returned
handler is not NULL, but get_protocol_handler returns NULL for
javascript: URIs.
In smjs_load_uri, if the given URI has a protocol for which some
external handler is defined, immediately return JS_FALSE because
smjs_load_uri implements an asynchronous operation, and we cannot
reasonably carry out the operation and callback with an external
handler.
Recognise the list-style property and apply it by setting the
appropriate flag on the element's parattr based on the property's value.
Add test/list-style.html with an example of each possible list-style
value (many are unsupported by the HTML engine).
In follow_url, do not call the follow-url hook if the URI encodes a POST
request. If scripts try to change such a URI, they can corrupt it and
cause problems later on.
This change can be reverted later when the URI structure is changed not
to store the POST data in the URI string.
Using the RFC 3546 server_name TLS extension with TLS 1.1 made
https://bugzilla.novell.com/ never respond to negotiation.
Disable TLS 1.1 with GnuTLS, like it has already been disabled with
OpenSSL. And if an SSL error is detected, disable TLS 1.2 as well.
I was trying to check which charset WIDGET_TEXT uses in the buffer but
had difficulty finding the code that handles key presses and updates
the buffer. These comments should make that easier in the future.
In bookmark_folder_get_property, convert the jsid value into
a jsval value before passing it to jsval_to_bookmark_string.
This commit fixes a bug in the xulrunner-2.0 compatibility changes
of commit 2844f8b715, which rendered
the bookmarks scripting interface for SpiderMonkey nonfunctional.
src/network/ssl/ssl.c defined some constant arrays for passing to
GnuTLS functions. Those functions have been deprecated and their
calls are in #if 0 nowadays. Put #if 0 around the arrays as well.
The URL in <meta http-equiv="Refresh" content="42; URL=target.html">
can now freely contain spaces and semicolons. There cannot be other
parameters between the delay and the URL. If the URL is not quoted,
then it spans to the end of the attribute, except not to trailing
spaces. If the URL is quoted, then it ends at the first closing
quotation mark. All this is consistent with Debian Iceweasel 3.5.16.
The HTML parser decoded SGML entity references and numeric character
references in the following attributes, and then the renderer did the
same again:
link/@title
link/@hreflang
link/@type
link/@media
img/@alt
area/@alt
input[@type="image"]/@alt
input[@type="image"]/@name
input[@type="button"]/@value
The result was that e.g. title="&#65;" displayed as "A"
even though it was supposed to display as "A".
Fix by making the HTML parser tell the renderer that the entities have
already been decoded.
The deprecated gnutls_certificate_verify_peers function returns -1
if it fails, or a set of gnutls_certificate_status_t bits; each bit
indicates some kind of problem, so the result is zero if the
certificate is OK.
The newer gnutls_certificate_verify_peers2 function returns -1 if it
fails, or 0 if it succeeds; and writes the status bits via a pointer.
When using that function, ELinks must check the status separately.
Do that.
Also, if GnuTLS is not being used, do not declare a status variable,
because leaving it unused would break the debug build:
/home/Kalle/src/elinks-0.13/src/network/ssl/socket.c: In function ‘ssl_want_read’:
/home/Kalle/src/elinks-0.13/src/network/ssl/socket.c:87: error: unused variable ‘status’
/home/Kalle/src/elinks-0.13/src/network/ssl/socket.c: In function ‘ssl_connect’:
/home/Kalle/src/elinks-0.13/src/network/ssl/socket.c:121: error: unused variable ‘status’
Make u2cp_() map code points U+0080 to U+009F via strange_chars[] even
if the target codepage is UTF-8. This helps with buggy web pages that
use ’ when they mean ’. This change does not affect how
ELinks decodes raw bytes 0x80 to 0x9F in HTML.
u2cp_() is used only via the u2cp and u2cp_no_nbsp macros.
Possible side effects of this change at each use of these macros:
* get_translation_table(): Not affected because it does not call u2cp
if the target codepage is UTF-8.
* get_entity_string(): Numeric character references are affected, as intended.
Character entity references are not affected because entities[]
does not define any entities in the U+0080...U+009F range.
* kbd_field(), term_send_ucs(), field_op(): Affected. It is no longer
possible to enter code points U+0080...U+009F from the terminal.
This should not be a problem in practice because those would be
control characters anyway and should therefore be filtered by the
slave process (which doesn't yet recognize them; bug 777).
If ELinks was configured --without-x, the build failed at
xprop_to_string:
.../src/osdep/osdep.c:500: error: expected ‘)’ before ‘*’ token
Fix by moving xprop_to_string into the #ifdef HAVE_X11 section.
Reported by Thomas Adam.
If Xutf8TextPropertyToTextList or XmbTextPropertyToTextList returns a
positive number, that means some characters were unconvertible and
have been replaced with XDefaultString(). Use the resulting string
even in that case, as if the function had returned Success.
The previous version ignored the string and didn't even free it.
gnome-terminal 2.30.2 expects UTF-8 in the "OSC Ps ; Pt BEL" sequence
that sets the window title. However, XGetWMName typically returns the
title in "STRING" (Latin-1) or "COMPOUND_TEXT" (escape sequences)
encoding. Recode the title to restore it correctly. This helps
especially in the fi_FI.UTF-8 locale, where gnome-terminal has "Pääte"
as the default title.
Related to bugs 885 and 336.
Try to make the code a little clearer by pulling try_menu out of
send_kbd_event. try_menu calls the BFU code and tells send_kbd_event
whether the BFU code did something with the event (i.e. opened a menu)
or whether the event still needs to be handled.
With document.browse.accesskey.priority = 0, accesskeys were ignored if
the current tab was not the last (rightmost) tab. This commit fixes the
problem.
Add a function tabs_are_on_top(struct terminal *) which returns
a Boolean value indicating whether the topmost window is a tab (as
opposed to, e.g., a menu).
This commit fixes commit 1bd498cde9.
Use check_vs instead of set_pos_x and set_pos_y in fixup_typeahead_match.
This saves us a line of code, and in addition, check_vs does not needlessly
scroll when the link is already in view.
Make set_kbd_repeat_count update the status bar and link highlighting
iff the repeat count is changed to a different value.
Delete code to do the same updates from do_action and try_prefix_key.
Besides simplifying the code, this change also fixes some issues with
the status bar and link highlighting not being properly updated in some
situations.
Introduce and use ses_kbd_repeat_count to change
ses->kbdprefix.repeat_count instead of setting it directly.
This change should not cause any change in behaviour.
Add an option to specify the number of overlapping lines when scrolling
page by page (0 by default because this is ELinks' current behaviour).
Signed-off-by: Fabienne Ducroquet <fabiduc@gmail.com>
than 2GiB in the download dialog. Also let regetting big files.
Previously the Content-Length variable in http.c was int, what is
not enough. Now it is long long.
Add an include for config/options.h to src/ecmascript/spidermonkey.c
and two missing declarations (struct form_view and struct form_state)
to src/ecmascript/spidermonkey.h.
When a link had an onClick event handler that changes the current document,
ELinks would follow the current link of the document displayed after
executing the handler.
Factor goto_link out of goto_current_link.
Use goto_link instead of goto_current_link in activate_link to ensure that
the link that is passed in by enter() is followed.
After viewing a page with Big5 charset and next a page with UTF-8
charset iconv was used, so slows down a bit.
Now iconv is used only for those charsets, which has the iconv
bitfield set.
Implement new heartbeat code to catch runaway execution of document
ECMAScript code. The old code uses JS_SetBranchCallback which is
deprecated in new versions of SpiderMonkey. The new code uses setitimer(2)
and the JS_SetOperationCallback and JS_TriggerOperationCallback interfaces,
introduced in SpiderMonkey 1.8.1. Compatibility with both the old
JS_SetBranchCallback and the new interfaces is maintained.
Bring the code closer to ELinks 0.13.GIT commit
71ccbe0f8d made on 2007-11-07.
Don't define a separate download_flags_T typedef though,
because Doxygen generates nicer links if the enum is used directly.
There are two identical tp_show_header() functions: one in
src/session/download.c and one in src/protocol/bittorrent/dialogs.c.
Neither is declared in any header, but the latter was not static.
If msg_box() runs out of memory, it returns NULL. In this case,
the done_handler_T callbacks of the buttons will not be called. So
lookup_unique_name() must instead free the struct lun_hop on its own.
Remove the stracpy(ofile) call that could never be executed.
This removes the need to handle errors from that call,
and makes it clear that lun_hop->file need not be separately freed
if an error occurs in lookup_unique_name().
With GCC 4.3.1 on i686, this changes the sizes of sections as follows:
section before after change
.text 682428 682492 +64
.rodata 212668 216352 +3684
.data 58092 54444 -3648
.debug_info 1482388 1482472 +84
.debug_abbrev 153714 153723 +9
.debug_line 272299 272319 +20
.debug_loc 540394 540372 -22
.debug_ranges 113784 113792 +8
Total 3917695 3917894 +199
The surprising .text change comes from src/config/dialogs.o.
Some of that is in get_keybinding_text(), where GCC changes the
order of basic blocks and apparently misses some optimizations.
I added this bug last night. continue_download_do() passed the
file descriptor to transform_codw_to_cmdw(), which saved it, but
continue_download_do() then closed it.
In common_download(), move session.download_uri to the new member
cmdw_hop.download_uri, which common_download_do() then reads. This
shields the download request against possible session.download_uri
changes made for other downloads. And transform_codw_to_cmdw() no
longer needs to touch session.download_uri at all, solving a FIXME.
Commit ff136e5116 on 2006-07-16 made
lun_resume() check if cdf_hop->data points to struct codw_hop,
and transform that to struct cmdw_hop if so. Move the transform
into a separate function called from continue_download_do().
This way, the structures used with create_download_file() no longer
need to begin with int magic.
To reproduce:
- Configure with --enable-debug.
- Go to http://elinks.cz/
- Set the cursor on the "About" link and press d to download,
- ELinks asks where to save the file. Cancel that with Esc.
This leaves session.download_uri != NULL.
- Go to /etc/passwd
- ELinks asks what to do with the file. Choose to download.
- ELinks asks where to save the file. Type the name of a new file
and press Enter.
- Again go to /etc/passwd
- ELinks asks what to do with the file. Choose to download.
- ELinks asks where to save the file. Type the same name as before
and press Enter.
- ELinks asks whether to resume or overwrite. Choose to resume.
This changes session.download_uri and leaks the original URI.
- Quit ELinks. It reports memory leaks:
0x88936d8:28 @ alloc'd at /home/Kalle/src/elinks-0.12/src/util/hash.c:89
0x88dac00:95 @ alloc'd at /home/Kalle/src/elinks-0.12/src/protocol/uri.c:1551
0x88c33a8:4104 @ alloc'd at /home/Kalle/src/elinks-0.12/src/util/hash.c:41
This commit fixes the leak, but it's still a bug that lun_resume() can
replace the session.download_uri that will be used by another pending
download. In particular, this might happen if the user first presses
d to download, and then while ELinks is asking for the file name, a
web script changes window.location to a different URI and that causes
ELinks to ask what to do with the file. So I'm leaving the FIXME
comment in for now.
If init_file_download() succeeds (returning non-NULL), it saves the
file descriptor to file_download->handle, whence abort_download() will
close it. However, if init_file_download() fails, the caller is
responsible of closing the file, something common_download_do() and
continue_download_do() failed to do. There was no problem with
bittorrent_download() because that uses -1 as the fd.
If init_file_download() succeeds (returning non-NULL), it saves the
file-name pointer to file_download->file, whence abort_download() will
free it. However, if init_file_download() fails, the caller is
responsible of freeing the name. bittorrent_download() already did so
but common_download_do() and continue_download_do() didn't.
Remove enum main_action_offset, enum edit_action_offset, and enum
menu_action_offset. It seems the original plan (in commit
174eabf1a448d3f084a318aab77805828f35c42e on 2005-05-16) was to include
the action flags in the action IDs, perhaps with something like:
ACT_##map##_##action = ACT_##map##_OFFSET_##action | flags
However, this OR operation was never implemented; each ACT_*_*
constant had the same value as the corresponding ACT_*_OFFSET_*,
and the code that looked for flags in action IDs found only zeroes.
Then on 2005-06-10, a separate action.flags member was added, and
the flag checks were corrected to read that instead. So, it seems
safe to say that the original plan has been discarded and the offset
enumerations won't be needed.
Doxygen isn't too good at documenting the parameters of a callback
within the documentation of a parameter that points to the callback.
A typedef provides a better place to document the parameters.
If the user chose File -> Save formatted document and typed the name
of an existing file, ELinks offered to resume downloading the file.
There are a few problems with that:
* save_formatted_finish does not actually support resuming. It would
instead overwrite the beginning of the file and not truncate it.
* When save_formatted calls create_download_file, cdf_hop->data
ends up pointing to struct document. If the user then chooses to
resume, lun_resume would read *(int *)cdf_hop->data, hoping to
get cmdw_hop.magic or codw_hop.magic. struct document does not
begin with any such magic value.
* Because ELinks already has the formatted document in memory,
resuming saves neither time nor I/O.
So don't show the "Resume download of the original file" button in
this situation.
After the recent ecmascript_get_interpreter change, I got an assertion
failure in render_document, which calls ecmascript_reset_state and
then asserts that it has set vs->ecmascript != NULL.
ecmascript_reset_state cannot guarantee that because there might not
even be enough free memory for mem_calloc(1, sizeof(struct
ecmascript_interpreter). So, replace the assertion in render_document
with error handling, and likewise in call_onsubmit_and_submit.
This should fix a crash in:
at /home/Kalle/src/elinks-0.12/src/ecmascript/spidermonkey.c:251
at /home/Kalle/src/elinks-0.12/src/ecmascript/ecmascript.c:104
at /home/Kalle/src/elinks-0.12/src/viewer/text/vs.c:64
It seems that spidermonkey_get_interpreter failed and returned NULL to
ecmascript_get_interpreter, which did not check the return value and
behaved as if the ECMAScript interpreter had been properly initialized.
This caused destroy_vs to call ecmascript_put_interpreter, but
backend_data which should have been a JSContext * was NULL, causing
a crash in SpiderMonkey.
An alternative fix might be to make spidermonkey_put_interpreter skip
the JS_DestroyContext call if ctx is NULL. However, I think it is
better to make sure ecmascript_get_interpreter returns NULL if
spidermonkey_get_interpreter fails, so that vs->ecmascript is left
NULL and there's no chance that some other code might try to
dereference the (JSContext *) NULL.
Perhaps because of bug 981, if one opened hundreds of pages with
elinks --remote openURL(...), then ELinks 0.11.4 could crash with a
SIGSEGV in JS_InitClass called from spidermonkey_get_interpreter.
SpiderMonkey ran out of memory and began returning NULL and JS_FALSE
but ELinks didn't notice them and pressed on. Add some checks to
avoid the crash, although the underlying out-of-memory error remains.
The old code failed to write pending spaces before changing the
background color. That seems hard to fix without duplicating code,
and ELinks pads dumped lines to the requested width in these color
modes anyway, so this commit just makes ELinks write all spaces
immediately when colors are being used.
Try the following command before and after this commit:
elinks --no-home --eval "set document.colors.use_document_colors = 2" \
--dump-color-mode 1 --dump test/color.html
In DUMP_FUNCTION_SPECIALIZED, use isscreensafe_ucs (for UTF-8) or
isscreensafe (for unibyte) to detect control characters, and replace
them with spaces. add_document_to_string already did the same.
In DUMP_FUNCTION_SPECIALIZED (used by elinks --dump), detect the
second cell of double-cell (aka fullwidth) characters by comparing to
UCS_NO_CHAR, like add_document_to_string does. Don't use
unicode_to_cell for this any more.
Also, ignore the colors and attributes of the second cell; don't
output any escape sequences for them.
In start_document_refresh, use register_bottom_half instead of
install_timer if the timeout is 0 because install_timer asserts that it is
given a delay greater than 0.
Add a test case, test/refresh-0timeout.html. Note that
document.browse.minimum_refresh_time must be set to 0 to reproduce the
assertion failure.
Add a 'Search contents' button to the cache manager that searches
through the cache items' data rather than their metadata.
Add match_cache_entry_contents.
Add push_cache_hierbox_search_button and
push_cache_hierbox_search_contents_button, which call
push_hierbox_search_button after setting box->ops to either
cache_entry_listbox_ops or cache_entry_listbox_ops_match_contents,
respectively, which define the appropriate match callback for the
hierbox search code.
Add strlcasestr, used in the new match_cache_entry_contents routine.
Add an "Invalidate" button to the cache manager, which is useful when
a cache entry is locked and cannot be deleted but one does not want
ELinks to use that cache entry.
This is especially useful for showing that neither dump_truecolor_utf8
nor dump_truecolor_unibyte modifies its static color[] variable and it
therefore does not matter whether those functions use the same array
or not.
With all the comments and macros needed for this, the source files
don't become much shorter, but anyway I hope they'll be easier to
maintain this way.
This code was included in four variants of dump_to_file().
Move it to a new function dump_references() and make dump_to_file()
then call that. This makes the code size a little smaller.
The time cost will be negligible.
Instead of having four separate function definitions, have just one
sprinkled with #ifdefs, and #include that four times. The purpose
being to make it clearer which parts of these functions are identical
and which ones differ.
As a side effect, this change makes ELinks ignore --dump-color-mode
when dumping in UTF-8. Colourful UTF-8 dumping has not been
implemented and the fallback is now different from before.
Avoid compilation error with GNUTLS 1.2.9:
/home/Kalle/src/elinks-0.12/src/network/ssl/ssl.c:258: error: implicit declaration of function ‘gnutls_priority_set_direct’
If the function is not available, use gnutls_set_default_priority instead.
Perhaps it'll work with bugzilla.novell.com, perhaps not.
- gnutls_handshake_set_private_extensions: Do not enable private cipher
suites that might not be supported by anything other than GNUTLS.
The GNUTLS 2.8.0 documentation notes that enabling these extensions
can cause interoperability problems.
- gnutls_set_default_priority: Explicitly disable OpenPGP certificates.
- gnutls_certificate_type_set_priority: Do not enable OpenPGP certificates.
The GNUTLS 2.8.0 documentation notes that OpenPGP certificate support
requires libgnutls-extra. Because libgnutls-extra 2.2.0 and later are
under GPLv3-or-later and thus not GPLv2 compatible, ELinks doesn't use
libgnutls-extra, so OpenPGP certificates didn't work anyway.
- gnutls_server_name_set: Do not tell the server the hostname from the URL.
This was supposed to let the server choose the appropriate certificate
for each name-based virtual host, but ELinks actually always sent just
"localhost", so it didn't work anyway. This will have to be revisited
when ELinks is changed to actually verify the subject name from the
server's certificate (ELinks bug 1024).
These changes should help ELinks negotiate SSL with bugzilla.novell.com.
[NEWS and commit message by me. --KON]
Yet another valiant wack at the beast. This one violates abstractions
a little less deeply, so maybe it will work better.
The last attempt caused a crash when a tab was cloned after the tab's
loading had been aborted.
(cherry picked from commit 76377d9714)
Kalle reported that after commit 5c96d430c9,
ELinks would crash if the document in the old tab was still loading when a
new tab was opened. The problem was that the new session's download.data
pointer was not updated to point to the session as doc_loading_callback
expects.
Instead of just calling render_document_frames, set up the download and
call load_uri.
(cherry picked from commit d6116ca83a)
In setup_session, use copy_location, add_to_history, and
render_document_frames instead of goto_uri and copy_vs to copy the base
tab's view state. By avoiding goto_uri, setup_session now bypasses MIME
checks, form post confirmations, malicious URL checks, and so on when
copying the base tab's current location and view state to the new tab,
so the new tab should get exactly what was loaded in the base tab.
This fixes bug 765: Opening a new tab can ask about the document of the
previous tab.
(cherry picked from commit 5c96d430c9)
Conflicts:
src/session/session.c:
Both elinks-0.12 and master had the ses->doc_view->vs
= vs assignment, but only elinks-0.12 had vs->doc_view
= ses->doc_view as well. Also, struct connection_state
had been added after the original patch.
I am not hooking these to "make test", for two reasons:
1. utf8_step_forward is inside #ifdef CONFIG_UTF8 and I don't see
how to make tests conditional on such options.
2. test/libtest.sh was copied from Git, which is under GPLv2-only.
Adding more dependencies on it could make ELinks more difficult
to relicense under GPLv2-or-later.
In the task.c line 517 there is:
if (is_in_progress_state((*download_p)->state)) {
if (have_location(ses))
*download_p = &cur_loc(ses)->download;
^^^^^^^^^^^^^^^^^^^^^^^^^^^^
Here the download was changed. download->data and download->callback
were NULL after the assignment, but later in loading_callback
only download->callback had new value. download->data was still NULL.
Yet another valiant wack at the beast. This one violates abstractions
a little less deeply, so maybe it will work better.
The last attempt caused a crash when a tab was cloned after the tab's
loading had been aborted.
In load_uri, if there is no valid cache entry and no existing connection
for the requested URI, make one last check in case there is an
incomplete cache entry.
Simplify the end-of-line check in get_search_region_from_search_nodes by
relying on the fact that the n member of an instance of struct search
that marks the end of a line will be 0.
Allow searching on the last character of the document. Plain-text searches
already match on the last character as long as it isn't the first character
of a match, and regular-expression searches match on the last character if
the search pattern is longer than 1 character, so the problem addressed by
this commit is very much a corner case.
This commit reverts a portion of commit
fd15049622594d151104d43917984c7ce10993e6 (CVS revision 1.17).
text_typeahead_handler: Document that passing -2 for action_id will cause
a search without error reporting. This behaviour is unintentionally the
current behaviour of text_typeahead_handler, but now it is documented so
that it can be used.
input_line_event_handler: When rewinding, pass -2 for the action_id
parameter to the handler instead of passing again whatever action led to
the rewinding.
The old behavior of input_line_event_handler was particularly problematic
with the search-toggle-regex action and the text_typeahead_handler handler:
input_line_event_handler would call the handler with
ACT_EDIT_SEARCH_TOGGLE_REGEX, and the handler would toggle the setting and
perform the search again; then if the search string no longer matched
anything, the handler would return INPUT_LINE_REWIND to
input_line_event_handler, which would rewind and call the handler with
ACT_EDIT_SEARCH_TOGGLE_REGEX again, thus toggling the option back to the
original setting.
With the new behaviour, input_line_event_handler will not repeat the same
action when re-invoking the handler; in the above example with
search-toggle-regex, the search string will simply be rewound until it
matches with the new setting.
When a link had an onClick event handler that changed the current
document and that link was clicked, ELinks would follow the current link
of the document displayed after executing the handler instead of the
link that was clicked.
Factor goto_link out of goto_current_link.
Use goto_link instead of goto_current_link in activate_link to ensure that
the link that is passed in by enter() is followed.
Hierarchical listboxes draw items with upper-left corner, lower-left
corner, or horizontal border characters to indicate whether a given item is
the first item in a listbox, the last, or any other, respectively.
However, the wrong character can be drawn if there are invisible items: if
an item is the first (or last) visible item but there is an invisible item
before (or after) it, it will be drawn with a horizontal border character,
not a corner.
This patch fixes that problem using traverse_listbox_items_list in
display_listbox_item to ignore invisible items when determining whether
an item is either the first or the last among its siblings.
Drop special handling of ctrl-l in handle_interlink_event.
To make sure that the 'redraw' action works everywhere, first modify
menu_kbd_handler and mainmenu_kbd_handler to handle ACT_MENU_REDRAW; and
second, drop the ACTION_REQUIRE_VIEW_STATE flag from the 'redraw' action in
the 'main' keymap so that it works even if there is no document loaded.
Ctrl-l is already bound to 'redraw' in all keymaps by default, so the
current default behaviour is preserved.
Add 'Italic' checkbox to Terminal options dialog box.
Enable italic text by default for rxvt-unicode (and also enable
frames, 88-colour mode, and underline).
Kalle reported that after commit 5c96d430c9,
ELinks would crash if the document in the old tab was still loading when a
new tab was opened. The problem was that the new session's download.data
pointer was not updated to point to the session as doc_loading_callback
expects.
Instead of just calling render_document_frames, set up the download and
call load_uri.
This check used to be in src/elinks.h. Move it to configure.in so
that (1) the result can be logged and (2) ELinks won't even link with
TRE if wchar_t prevents its use.
Also, rename HAVE_TRE_REGEX_H to CONFIG_TRE, to reflect that it is not
always defined if the header exists.
At the end of the destroy_vs there two assignments vs->doc_view->vs = NULL and
vs->doc_view = NULL. In the setup_session the copy_vs left the vs "unbound"
with any variable. At least one of these two is wrong.
Fix this error when configured with --enable-debug --disable-utf-8:
[CC] src/bfu/text.o
cc1: warnings being treated as errors
/home/Kalle/src/elinks-0.13/src/bfu/text.c: In function ‘dlg_format_text_do’:
/home/Kalle/src/elinks-0.13/src/bfu/text.c:220: error: unused variable ‘term’
Fix this error when configured with --enable-debug --disable-utf-8:
[CC] src/bfu/button.o
cc1: warnings being treated as errors
/home/Kalle/src/elinks-0.13/src/bfu/button.c: In function ‘dlg_format_buttons’:
/home/Kalle/src/elinks-0.13/src/bfu/button.c:122: error: unused variable ‘term’
When setting up default values for terminal options, use named
constants like TERM_VT100 or COLOR_MODE_16, rather than plain integers
like 1. This is just to make the source code easier to read and
perhaps more resistant to future bugs. The binary should not change.
If globhist_simple_search ran out of memory in stracpy(search_url), it
could leave gh_last_searched_title pointing to freed memory and cause
a crash in the next call. Fix by not freeing gh_last_searched_title.
It is then possible to have gh_last_searched_title and
gh_last_searched_url pointing to strings from different searches;
but that was already possible if stracpy(search_title) failed.
Because this bug occurs only in out-of-memory situations and I don't
think ELinks in general has been properly tested in those, the fix is
perhaps not worth mentioning in NEWS and backporting to elinks-0.11.
If the parent parameter of get_dom_node_list_index referred to a node
that did not have children, then get_dom_node_list called by it could
return the address of a null pointer, and get_dom_node_list_index would
then pass that null pointer to get_dom_node_list_pos, which would crash.
That would be the same kind of crash as the one in get_dom_node_child.
It never happened in practice though: because all calls are in the form
get_dom_node_list_index(node->parent, node), the list must contain at
least the given node, and the pointer cannot be null. The documentation
of get_dom_node_list_index allows arbitrary nodes as arguments however,
so it's best to add a check.
struct dom_node contains a union that contains various structs that
have members of type struct dom_node * in them.
get_dom_node_list_by_type returns the address (struct dom_node **) of
one of those members, or NULL. However the member itself can also be
NULL if no nodes have been added to the list and the list has thus not
yet been allocated. (add_to_dom_node_list lazily allocates the lists.)
get_dom_node_child did not expect a null pointer there and crashed, as
shown in bug 1071. Fix by adding a check so that it treats a NULL list
as an empty list.
C99 6.7.4p3 and 6.7.4p6 set some constraints on what can be done in
inline functions and how they can be declared. In particular, any
function declared inline must also be defined in the same translation
unit. To comply with that, remove inline specifiers from function
declarations in header files when the functions are not also defined
in those header files.
Sun Studio 11 on Solaris 9 is stricter than C99 and does not allow
references to static identifiers in extern inline functions. Make the
configure script detect this and define NONSTATIC_INLINE accordingly
in config.h. Then use that in the definitions of all non-static
inline functions.
Document the restrictions and this scheme in doc/hacking.txt.
Documentation strings of most options used to contain a "\n" at the
end of each source line. When the option manager displayed these
strings, it treated each "\n" as a hard newline. On 80x24 terminals
however, the option description window has only 60 columes available
for the text (with the default setup.h), and the hard newlines were
further apart, so the option manager wrapped the text a second time,
resulting in rather ugly output where long lones are interleaved with
short ones. This could also cause the text to take up too much
vertical space and not fit in the window.
Replace most of those hard newlines with spaces so that the option
manager (or perhaps BFU) will take care of the wrapping. At the same
time, rewrap the strings in source code so that the source lines are
at most 79 columns wide.
In some options though, there is a list of possible values and their
meanings. In those lists, if the description of one value does not
fit in one line, then continuation lines should be indented. The
option manager and BFU are not currently able to do that. So, keep
the hard newlines in those lists, but rewrap them to 60 columns so
that they are less likely to require further wrapping at runtime.
test_search() was supposed to compare bookmark titles with
strcasestr(), but in commit 311d95358d
"bug 153, 1066: Convert bookmarks to/from UTF-8 when searching."
on 2009-02-08, I inadvertently changed that to strcasecmp(), even
while adding a comment about why strcasestr() is needed. strcasestr()
returns non-NULL if the strings match, and strcasecmp() returns
nonzero if they differ, so the search didn't work at all.
This reverts commit b94657869b.
I don't know where I got the idea that JS_SetErrorReporter affects the
entire JSRuntime, rather than only the provided JSContext. The people
on #jsapi say it has never worked that way.
In utf8_to_jsstring, do not free the string that is passed to
JS_NewUCString if the latter is successful; if it is, SpiderMonkey
handles the memory from then on.
Use libc routines instead of ELinks's routines to allocate and free the
string so that ELinks's memory debugging code does not try to keep track
of it after it has been handed to SpiderMonkey.
This commit fixes a bug introdued in
97d72d15a0.
In utf8_to_jsstring, do not free the string that is passed to
JS_NewUCString if the latter is successful; if it is, SpiderMonkey
handles the memory from then on.
Use libc routines instead of ELinks's routines to allocate and free the
string so that ELinks's memory debugging code does not try to keep track
of it after it has been handed to SpiderMonkey.
This commit fixes a bug introdued in
97d72d15a0.
This makes the option manager display it much better on an 80x24
terminal.
Alternatively, the "\n" newline characters within paragraphs could
have been removed entirely. ELinks would then have line-wrapped the
text to the appropriate width in the info window of the option
manager, but unfortunately not in --config-help.
AFAIK, all bugs in it have been fixed. Some bugs may still be lurking
but they are more likely to get caught if compression is enabled.
I also replaced COMP_NOTE with static text because xgettext does not
support macros in the argument of N_.
(cherry picked from commit 3a9b5d091d)
Check the return value of get_opt_rec on "document.browse.search.regex"
before dereferencing it. The option is not there if regular expression
support is disabled at build time.
This commit fixes a bug introduced in commit
b2d51c75ff0d6c52a4f6a2761801beb641cba3a2.
Check the return value of get_opt_rec on "document.browse.search.regex"
before dereferencing it. The option is not there if regular expression
support is disabled at build time.
This commit fixes a bug introduced in commit
b2d51c75ff0d6c52a4f6a2761801beb641cba3a2.
In src/session/task.c, if ses_goto() was going to ask the user to
confirm, it did:
task->session_task.target.frame = null_or_stracpy(target_frame);
It added the struct task to a memory_list, so the structure was freed
when the message box was closed. The target frame string was however
never freed. To fix this leak, add the target frame string to the
memory_list too.
Alternatively, this could have been fixed by making post_yes() and
post_no() free the string. It is however a bit better to use the
memory_list because msg_box() frees that even if it is unable to
display the message box.
In bug 1067, dom_rss_pop_document() freed a node with done_dom_node()
even though call_dom_node_callbacks() was still using that node. This
made call_dom_node_callbacks() read a function pointer from beyond the
end of an array and call that. Add assertions to detect out-of-range
node types, and comments to warn about the bug.
Debian libmozjs-dev 1.9.0.4-2 has JS_ReportAllocationOverflow but
js-1.7.0 reportedly hasn't. Check at configure time whether that
function is available. If not, use JS_ReportOutOfMemory instead.
Reported by Witold Filipczyk.
I didn't read the code of the tre library, but I suppose that when sizes of
wchar_t and unicode_val_T are equal it will work fine.
[ From bug 1060 attachment 508. --KON ]
When the user tells ELinks to search for a regexp, ELinks 0.11.0
passes the regexp to regcomp() and the formatted document to
regexec(), both in the terminal charset. This works OK for unibyte
ASCII-compatible charsets because the regexp metacharacters are all in
the ASCII range. And ELinks 0.11.0 doesn't support multibyte or
ASCII-incompatible (e.g. EBCDIC) charsets in terminals, so it is no
big deal if regexp searches fail in such locales.
ELinks 0.12pre1 attempts to support UTF-8 as the terminal charset if
CONFIG_UTF8 is defined. Then, struct search contains unicode_val_T c
rather than unsigned char c, and get_srch() and add_srch_chr()
together save UTF-32 values there if the terminal charset is UTF-8.
In plain-text searches, is_in_range_plain() compares those values
directly if the search is case sensitive, or folds them to lower case
if the search is case insensitive: with towlower() if the terminal
charset is UTF-8, or with tolower() otherwise. In regexp searches
however, get_search_region_from_search_nodes() still truncates all
values to 8 bits in order to generate the string that
search_for_pattern() then passes to regexec(). In UTF-8 locales,
regexec() expects this string to be in UTF-8 and can't make sense of
the truncated characters. There is also a possible conflict in
regcomp() if the locale is UTF-8 but the terminal charset is not, or
vice versa.
Rejected ways of fixing the charset mismatches:
* When the terminal charset is UTF-8, recode the formatted document
from UTF-32 to UTF-8 for regexp searching. This would work if the
terminal and the locale both use UTF-8, or if both use unibyte
ASCII-compatible charsets, but not if only one of them uses UTF-8.
* Convert both the regexp and the formatted document to the charset of
the locale, as that is what regcomp() and regexec() expect. ELinks
would have to somehow keep track of which bytes in the converted
string correspond to which characters in the document; not entirely
trivial because convert_string() can replace a single unconvertible
character with a string of ASCII characters. If ELinks were
eventually changed to use iconv() for unrecognized charsets, such
tracking would become even harder.
* Temporarily switch to a locale that uses the charset of the
terminal. Unfortunately, it seems there is no portable way to
construct a name for such a locale. It is also possible that no
suitable locale is available; especially on Windows, whose C library
defines MB_LEN_MAX as 2 and thus cannot support UTF-8 locales.
Instead, this commit makes ELinks do the regexp matching with regwcomp
and regwexec from the TRE library. This way, ELinks can losslessly
recode both the pattern and the document to Unicode and rely on the
regexp code in TRE decoding them properly, regardless of locale.
There are some possible problems though:
1. ELinks stores strings as UTF-32 in arrays of unicode_val_T, but TRE
uses wchar_t instead. If wchar_t is UTF-16, as it is on Microsoft
Windows, then TRE will misdecode the strings. It wouldn't be too
hard to make ELinks convert to UTF-16 in this case, but (a) TRE
doesn't currently support UTF-16 either, and it seems possible that
wchar_t-independent UTF-32 interfaces will be added to TRE; and (b)
there seems to be little interest on using ELinks on Windows anyway.
2. The Citrus Project apparently wanted BSD to use a locale-dependent
wchar_t: e.g. UTF-32 in some locales and an ISO 2022 derivative in
others. Regexp searches in ELinks now do not support the latter.
[ Adapted to elinks-0.12 from bug 1060 attachment 506.
Commit message by me. --KON ]
In src/bookmarks/dialogs.c, do_add_bookmark() gets the title and URL
in the terminal charset and needs to know which one that is. When a
bookmark is being added, save the struct terminal * to dialog.udata2
and read the charset from there. When a bookmark is being edited,
dialog.udata2 is needed for the struct bookmark *, but there we always
have the parent struct dialog_data * in dialog.udata and can get the
terminal from that.
