8582bbc752
There is still some work to do to handle use_reset_method(). Started work on a program to read/write eeprom. Not working yet.
89 lines
2.8 KiB
C
89 lines
2.8 KiB
C
#ifndef __PLOADER_H__
|
|
#define __PLOADER_H__
|
|
|
|
#ifdef __cplusplus
|
|
extern "C"
|
|
{
|
|
#endif
|
|
|
|
#include <stdint.h>
|
|
|
|
#define LOAD_PHASE_HANDSHAKE 0
|
|
#define LOAD_PHASE_RESPONSE 1
|
|
#define LOAD_PHASE_VERSION 2
|
|
#define LOAD_PHASE_HANDSHAKE_DONE 3
|
|
#define LOAD_PHASE_PROGRAM 4
|
|
#define LOAD_PHASE_EEPROM_WRITE 5
|
|
#define LOAD_PHASE_EEPROM_VERIFY 6
|
|
#define LOAD_PHASE_DONE 7
|
|
|
|
#define LOAD_STS_OK 0
|
|
#define LOAD_STS_ERROR -1
|
|
#define LOAD_STS_TIMEOUT -2
|
|
|
|
#define LOAD_TYPE_SHUTDOWN 0
|
|
#define LOAD_TYPE_RUN 1
|
|
#define LOAD_TYPE_EEPROM 2
|
|
#define LOAD_TYPE_EEPROM_RUN 3
|
|
|
|
/* constants taken from the Propeller Tool loader */
|
|
#define BaudRate 115200 // Likely Baud rate of Propeller communication
|
|
#define ResetPulsePeriod 25 // Reset pulse size (in ms)
|
|
#define MinResetDelay 60 // Minimum post-reset delay
|
|
#define MaxResetDelay 500 // Maximum post-reset delay
|
|
|
|
/* Transmit buffer size is 32K / 4 = 8K longs * 11 bytes per long plus two longs for the command and size */
|
|
#define TxBufSize ((((1024 * 32) / 4) + 2) * 11)
|
|
|
|
/* Receive buffer is large enough to receive max possible bytes during reset + 250 bytes for handshake response */
|
|
#define RxBufSize (((BaudRate / 10 * (ResetPulsePeriod + MaxResetDelay) / 1000) & 0xFFFFFFFE) + 258)
|
|
|
|
/* loader state structure - filled in by the loader functions */
|
|
typedef struct {
|
|
|
|
/* serial driver interface */
|
|
void (*reset)(void *data);
|
|
int (*tx)(void *data, uint8_t* buf, int n);
|
|
int (*rx_timeout)(void *data, uint8_t* buf, int n, int timeout);
|
|
void (*msleep)(void *data, int msecs);
|
|
void *serialData;
|
|
|
|
/* propeller version */
|
|
int version;
|
|
|
|
/* load progress interface */
|
|
void (*progress)(void *data, int phase);
|
|
void *progressData;
|
|
|
|
/* internal variables */
|
|
uint8_t txbuf[TxBufSize];
|
|
int txcnt;
|
|
uint8_t rxbuf[RxBufSize];
|
|
int rxnext;
|
|
int rxcnt;
|
|
uint8_t lfsr;
|
|
} PL_state;
|
|
|
|
/* PL_Init - Initializes the loader state structure. */
|
|
void PL_Init(PL_state *state);
|
|
|
|
/* PL_HardwareFound - Sends the handshake sequence and returns non-zero if a Propeller
|
|
chip is found on the serial interface and also sets the version parameter to the
|
|
chip version.
|
|
*/
|
|
int PL_HardwareFound(PL_state *state, int *pVersion);
|
|
|
|
/* PL_LoadSpinBinary - Loads a Spin binary image. Must be called immediatel following a
|
|
successful call to PL_HardwareFound.
|
|
*/
|
|
int PL_LoadSpinBinary(PL_state *state, int loadType, uint8_t *image, int size);
|
|
|
|
/* PL_Shutdown - Shutdown the loader.*/
|
|
void PL_Shutdown(PL_state *state);
|
|
|
|
#ifdef __cplusplus
|
|
}
|
|
#endif
|
|
|
|
#endif
|