Problem: spurious CursorHold triggered in GUI on startup
Solution: init global did_cursorhold flag to true
(Gary Johnson)
When Vim is started in GUI mode, the CursorHold autocommand event is
triggered 'updatetime' milliseconds later, even when the user has not
pressed a key. This is different from the behavior of Vim in terminal
mode, which does not trigger a CursorHold autocommand event at startup,
and contradicts the description of the CursorHold event in ":help
CursorHold", which states that the event is "[n]ot triggered until the
user has pressed a key".
The fix is to change the initial value of did_cursorhold from FALSE to
TRUE. While it is true that the CursorDone event has not been done yet
at startup, it should appear to have been done until the user presses
a key.
fixes#17350closes: #17382
Signed-off-by: Gary Johnson <garyjohn@spocom.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: crash when calling non-existing function for tabpanel (Yamagi,
after v9.1.1391)
Solution: check if there was an error and if there was, set tabpanel
option to empty to prevent showing errors on every redraw
fixes: #17364closes: #17375closes: #17371
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: out-of-bounds access with 'completefunc' (csetc)
Solution: check if it is safe to advance cpt_sources_index
(Girish Palya)
fixes: #17363closes: #17374
Co-authored-by: @csetc
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: using f-flag in 'complete' conflicts with Neovims filename
completion (glepnir, after v9.1.1301).
Solution: use upper-case "F" flag for completion functions
(Girish Palya).
fixes: #17347closes: #17378
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: not easily possible to complete from register content
Solution: add register-completion submode using i_CTRL-X_CTRL-R
(glepnir)
closes: #17354
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Can't use getpos('v') in OptionSet when using setbufvar().
Solution: Don't reset Visual selection when switching to the same
buffer (zeertzjq).
closes: #17373
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: crash when importing invalid tuple
(Yang LUO, Yanju Chen)
Solution: set type to VAR_UNKNOWN, so that it isn't freed
(Yegappan Lakshmanan)
closes: #17362
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: no test for mapping with special keys in session file.
Solution: Add a special keys to an existing test. Also test with UTF-8
characters containing 0x80 or 0x9b bytes (zeertzjq).
closes: #17360
Signed-off-by: zeertzjq <zeertzjq@outlook.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: wrong link to Chapter 2 in vim-01-beginner.tutor
Solution: Fix the link to Chapter 2, add test for links in tutor files
(Phạm Bình An)
In order to write the test, I expose the function `s:GlobTutorials` as
`tutor#GlobTutorials` and make it also accept a `locale` argument.
closes: #17356
Signed-off-by: Phạm Bình An <111893501+brianhuster@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: expansion of 'tabpanelopt' value adds wrong values
(Shane-XB-Qian, after v9.1.1391)
Solution: update tabpanelopt expansion function and expand only valid
values (Hirohito Higashi)
related: #17263closes: #17359
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: multi-byte mappings not properly stored in session file
Solution: unescape the mapping before writing out the mapping, prefer
single-byte mapping name if possible (Miguel Barro)
closes: #17355
Signed-off-by: GuyBrush <miguel.barro@live.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: list not materialized in prop_list()
(Nickwiz)
Solution: materialize list before accessing it
fixes: #17298closes: #17349
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: [security]: use-after-free when evaluating tuple fails
Solution: return early in case of an error (Yegappan Lakshmanan)
closes: #17351
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tests: test_codestyle fails for auto-generated files.
While those files are already ignored in Test_source_Files(),
the newly added Test_indent_of_source_files() does not filter
those out and causes test failures on appveyor.
Solution: factor out the generation of all c files into a common function
and filter out auto-generated files if_ole.h, iid_ole.c and
dlldata.c
closes: #17352
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When items are combined with user-defined highlight attributes
(e.g., strikethrough), trunc inherits these attributes, making
the text difficult to read.
Solution: trunc now uses the original Pmenu and PmenuSel highlight
attributes (glepnir)
closes: #17340
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The 'grepformat' option is global option, but it would be
useful to have it buffer-local, similar to 'errorformat' and
other quickfix related options (Dani Dickstein)
Solution: Add the necessary code to support global-local 'grepformat',
allowing different buffers to parse different grep output
formats (glepnir)
fixes: #17316closes: #17315
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: search_stat not reset when pattern differs in case
(tahzibijafar)
Solution: use STRNCMP instead of MB_STRNICMP macro
There was a long standing todo comment, that using MB_STRNICMP is wrong.
So let's change it to STRNCMP() instead. Even if it not handle
multi-byte characters correctly, then Vim will rather recompute the
search stat, instead of re-using the old (and possibly wrong) value.
fixes: #17312closes: #17314
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: tabpanel not correctly redrawn on tabonly
(Maxim Kim, after v9.1.1391)
Solution: force redraw of the tabpanel, tweak style
(Hirohito Higashi)
fixes: #17322closes: #17330
Signed-off-by: Hirohito Higashi <h.east.727@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: The check in buf_freeall that restores curwin subtly prevents
leaving an unloaded buffer in a window when reusing curbuf, if
autocommands switch to a different buffer.
Solution: Add a test case that covers this. Also ensure splitting isn't
possible, as that could do the same (Sean Dewar)
closes: #17325
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Vim does not have a tabpanel
Solution: include the tabpanel feature
(Naruhiko Nishino, thinca)
closes: #17263
Co-authored-by: thinca <thinca@gmail.com>
Signed-off-by: Naruhiko Nishino <naru123456789@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: style: more wrong indentation
Solution: reformat a few more places
(Yegappan Lakshmanan)
closes: #17309
Signed-off-by: Yegappan Lakshmanan <yegappan@yahoo.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot get completion startcol when space is not the first
trigger character (after v9.1.1383)
Solution: Detect the next comma followed by a space in the option string
and use in next compare loop (glepnir)
closes: #17311
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: One-off error in "count" to make "w_skipcol" zero with
'nosmoothscroll' page scrolling when last virtual line
in a buffer line is exactly the entire window width.
(Hirohito Higashi)
Solution: Properly compute the smallest integer value necessary
to make "w_skipcol" zero (Luuk van Baal)
fixes: #17317closes: #17318
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: buflist_new() leaks ffname and fails to reuse curbuf when
autocommands from buf_freeall change curbuf. Plus, a new
buffer is not allocated in this case, despite what the comment
above claims.
Solution: Remove the condition so ffname is not leaked and so a new
buffer is allocated like before v8.2.4791. It should not be
possible for undo_ftplugin or buf_freeall autocommands to
delete the buffer as they set b_locked, but to stay consistent
with other uses of buf_freeall, guard against that anyway
(Sean Dewar).
Note that buf is set to NULL if it was deleted to guard against the (rare)
possibility of messing up the "buf != curbuf" condition below if a new buffer
happens to be allocated at the same address.
closes: #17319
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: some minor problems building on AARCH64
Solution: Update Make_cyg_ming with aarch64 specific changes,
document how to build on aarch64 using msys2 packages
closes: #17048
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Loop that ensures "w_skipcol" is zero with 'nosmoothscroll'
for (half)-page scrolling is inefficient.
Solution: Calculate the required "count" instead of looping until
"w_skipcol" is zero (Luuk van Baal).
fixes: #17301closes: #17306
Signed-off-by: Luuk van Baal <luukvbaal@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: still some problem with the new tutors filetype plugin
Solution: refactor code to enable/disable tutor mode into
tutor#EnableInteractive() function, include a test
(Phạm Bình An)
I find it annoying that Tutor's interactive mode is always on (or debug
mode is off) even when I open a tutor file with :edit command.
I think it makes more sense to make this "interactive mode":
- Always on when it is opened with :Tutor command
- Off otherwise
For more references, see `:help` feature, it is a much better than
:Tutor, since I don't have to run `:let g:help_debug = 1` just to be able
to edit and save a help file
Therefore, I remove `g:tutor_debug`
closes: #17299
Signed-off-by: Phạm Bình An <phambinhanctb2004@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When a space character is used as a trigger in 'isexpand' option
it doesn't get recognized because skip_to_option_part() skips
spaces after a comma, treating them as option separators
rather than option value (after v9.1.1341)
Solution: manually set the part to a space character (glepnir).
closes: #17305
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Cannot return to the original text after selecting the next
item when the currently selected item is the last one.
Solution: When continuing to move down past the last item, locate the
original completion at the head/tail nodes of the completed
linked list (glepnir).
closes: #17300
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When an autocommand executes for a non-current buffer,
'eventignorewin' is only checked from the buffer's last
wininfo (overwrites win_ignore in the loop), not from the
value of 'eventignorewin' in all windows showing the buffer as
described (after v9.1.1084)
Solution: Fix the check and don't use wininfo, as that may only contain
windows that recently showed the buffer. Consider all the
buffer's windows in all tabpages (Sean Dewar).
closes: #17294
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: error when running evim when space in path of Vim
Solution: properly parse quoted strings (Miguel Barro)
When vim is installed in a path with whitespaces (like
`C:\Program Files (x86)\Vim\vim91\vim.exe`). Launching `evim` or
`vim -d` will try to open the file ` (x86)\Vim\vim91\vim.exe`.
Modern versions of vim simplify shell operation by parsing its own
command line. For example on Linux all vim flavours like `evim`, `rvim`,
etc are symlinks to vim. Then vim uses the `parse_command_name()`
function to identify which version of vim it should launch.
For `evim` if a GUI is available `gvim` is launched for better user
experience. In order to launch `gvim` the original command line is
parsed to be passed *verbatim* to the new instance.
This parsing did not properly handle quoted command lines with
whitespaces such as
```
"C:\Program Files (x86)\Vim\vim91\vim.exe" -y myfile.txt
```
closes: #17295
Signed-off-by: Miguel Barro <miguel.barro@live.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: When 'signcolumn' is set to `number` but a line has a sign
without text, the line number disappears (finite-state-machine)
Solution: Verify that a sign actually contains text before rendering the
line number (glepnir)
fixes: #17169closes: #17282
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: when failing to wipeout a quickfix dummy buffer, it will
remain as a dummy buffer, despite being kept.
Solution: clear its dummy BF_DUMMY flag in this case (Sean Dewar).
closes: #17283
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: heap use-after-free possible when autocommands switch away from the
quickfix dummy buffer, but leave it open in a window.
Solution: close its windows first before attempting the wipe.
(Sean Dewar)
related: #17283
Signed-off-by: Sean Dewar <6256228+seandewar@users.noreply.github.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Currently, 'smartcase' is respected when completing keywords
using <C-N>, <C-P>, <C-X><C-N>, and <C-X><C-P>. However, when
a user continues typing and the completion menu is filtered
using cached matches, 'smartcase' is not applied. This leads
to poor-quality or irrelevant completion suggestions, as shown
in the example below.
Solution: When filtering cached completion items after typing additional
characters, apply case-sensitive comparison if 'smartcase' is
enabled and the typed pattern includes uppercase characters.
This ensures consistent and expected completion behavior.
(Girish Palya)
closes: #17271
Signed-off-by: Girish Palya <girishji@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: Flag checking logic uses a temporary variable and multiple
bitwise operations in insexpand.c
Solution: Consolidate into a single equality check using bitwise OR and
comparison (glepnir)
closes: #17276
Signed-off-by: glepnir <glephunter@gmail.com>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: CI Tests favor GTK2 over GTK3
Solution: Install GTK3 dependencies and debug packages for CI workflows,
update ASAN suppression list, update required dependency
checks for the tests (Drew Vogel)
closes: #17253
Signed-off-by: Drew Vogel <dvogel@github>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: GTK3 and GTK4 will drop numeric cursor support.
Solution: Adopt GTK3 code and use CSS cursor convention (Drew Vogel).
closes: #14610
Signed-off-by: Drew Vogel <dvogel@github>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: too many strlen() calls in gui.c
Solution: refactor gui.c slightly (John Marriott)
This does the following changes:
- use macro STRCMP() instead of strcmp().
- refactor gui_outstr_nowrap() to remove call to STRLEN().
- refactor get_tabline_label() in attempt to simply it. At the same time
use standard looping construct for iterating over windows in a tab.
Move variables closer to where they are used. Add check that we don't
exceed size of NameBuff.
- small optimisation in get_find_dialog_text() to measure the string
length once.
closes: #17269
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
Problem: MS-Windows: compile warnings and too many strlen() calls in
os_mswin.c
Solution: refactor os_mswin.c and fix the warning (John Marriott)
This change does the following:
- Fix compile warnings (clang 20.1.3) in `mch_libcall()`:
```
os_mswin.c:902:21: warning: cast from 'MYSTRPROCSTR' (aka 'char *(*)(char *)') to 'MYSTRPROCINT' (aka 'int (*)(char *)') converts to incompatible function type [-Wcast-function-type-mismatch]`
902 | retval_int = ((MYSTRPROCINT)ProcAdd)((LPSTR)argstring);`
| ^~~~~~~~~~~~~~~~~~~~~`
os_mswin.c:914:21: warning: cast from 'MYINTPROCSTR' (aka 'char *(*)(int)') to 'MYINTPROCINT' (aka 'int (*)(int)') converts to incompatible function type [-Wcast-function-type-mismatch]`
914 | retval_int = ((MYINTPROCINT)ProcAddI)(argint);`
| ^~~~~~~~~~~~~~~~~~~~~~`
2 warnings generated.
```
- Refactor `stat_impl()` to remove call to `STRLEN()` (via `STRCAT()`).
- Refactor `Messaging_WndProc()`, `enumWindowsGetServer()` and
`serverSendToVim()` to remove calls to `STRLEN()`.
- Use `string_T` to store field `name` in `struct charset_pair` and
`struct quality_pair`. This means we can dispense with some calls to
`STRLEN()`.
- Use `ARRAY_LENGTH()` macro to determine end of array in
`charset_id2name()` and `quality_id2name()` to be consistent with the
rest of the code base.
closes: #17222
Signed-off-by: John Marriott <basilisk@internode.on.net>
Signed-off-by: Christian Brabandt <cb@256bit.org>
