#uBITX uBITX firmware, written for the Raduino/Arduino control of uBITX transceivers This project is based on https://github.com/afarhan/ubitx and all copyright is inherited. The copyright information of the original is below.

KD8CEC

Prepared or finished tasks for the next version

• Prevent overflow bugs [from pullrequest, history check] : complete

• Hamlib bug (raspberry pi), It was perfect for the 0.224 version, but there was a problem for the 0.25 version. Found by Beta Tester very thanks. On Windows, ham deluxe, wsjt-x, jt65-hf, and fldigi were successfully run. Problem with Raspberry pi. As a result of the analysis, when the serial port is initialized and used immediately, problems occur in Linux and Raspberry pi. -> Resolution (Complete)

• No TX on non-ham band request - This may be a prohibited item depending on the country. Plan to change for uBITX Manager for free countries - Icom, yaesu, kenwood are mostly jumper in circuit. Only those who need to lock themselves, Other users remain unchanged so, Available in most countries around the world. (Complete)

• I have heard that Beta testers want DialLock to distinguish between VFOA and VFOB (Complete)

• Convenience of band movement added (ing - need idea...)

• User Interface on LCD -> Option by user (yet - need idea)

• Include WSPR Beacone function - (considerd about include functions or create other version) complete experiment need solve : Big code size (over 100%, then remove some functions for experment) need replace Si5351 Library for multisynth (increase risk and need more beta tester) W3PM sent me his wonderful source - using BITX, GPS

---

REVISION RECORD

0.25

• Beta Version Released http://www.hamskey.com/2018/01/release-beta-version-of-cat-support.html
• Added CAT Protocol for uBITX
• Modified the default usb carrier value used when the setting is wrong.
• Fixed a routine to repair when the CAT protocol was interrupted.

0.24

• Program optimization reduce usage ram rate (string with M() optins)
• Optimized CAT protocol for wsjt-x, fldigi

0.23

• added delay_background() , replace almost delay() to delay_background for prevent timeout

• cat library compatible with FT-817 Command switch VFOA / VFOB, Read Write CW Speed Read Write CW Delay Time Read Write CW Pitch (with sidetone) All of these can be controlled by Hamradio deluxe.

• modified cat libray function for protocol for CAT communication is not broken in CW or TX mode

• Ability to change CW Delay

• Added Dial Lock function

• Add functions CW Start dely (TX -> CW interval)

• Automatic storage of VFO frequency It was implemented by storing it only once when the frequency stays 10 seconds or more after the change. (protect eeprom life)

0.22

• fixed screen Update Problem
• Frequency Display Problem - Problems occur below 1Mhz
• added function Enhanced CAT communication
• replace ubitx_cat.ino to cat_libs.ino
• Save mode when switching to VFOA / VFOB

0.21

• fixed the cw side tone configuration.
• Fix the error that the frequency is over.
• fixed frequency display (alignment, point)

0.20

• original uBITX software (Ashhar Farhan)

Original README.md

uBITX firmware, written for the Raduino/Arduino control of uBITX transceigers

Copyright (C) 2017, Ashhar Farhan

This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.

This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
GNU General Public License for more details.

You should have received a copy of the GNU General Public License
along with this program.  If not, see <https://www.gnu.org/licenses/>.