ubitx-v5x/ubitx_20/ubitx_lcd_2004.ino
2018-04-23 21:40:45 +09:00

856 lines
23 KiB
C++

/*************************************************************************
KD8CEC's uBITX Display Routine for LCD2004 Parrel
1.This is the display code for the default LCD mounted in uBITX.
2.Display related functions of uBITX. Some functions moved from uBITX_Ui.
3.uBITX Idle time Processing
Functions that run at times that do not affect TX, CW, and CAT
It is called in 1/10 time unit.
-----------------------------------------------------------------------------
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
**************************************************************************/
#include "ubitx.h"
//Common Defines *********************************************************
#define LCD_CLEARDISPLAY 0x01
#define LCD_RETURNHOME 0x02
#define LCD_ENTRYMODESET 0x04
#define LCD_DISPLAYCONTROL 0x08
#define LCD_CURSORSHIFT 0x10
#define LCD_FUNCTIONSET 0x20
#define LCD_SETCGRAMADDR 0x40
#define LCD_SETDDRAMADDR 0x80
// flags for display entry mode
#define LCD_ENTRYRIGHT 0x00
#define LCD_ENTRYLEFT 0x02
#define LCD_ENTRYSHIFTINCREMENT 0x01
#define LCD_ENTRYSHIFTDECREMENT 0x00
// flags for display on/off control
#define LCD_DISPLAYON 0x04
#define LCD_DISPLAYOFF 0x00
#define LCD_CURSORON 0x02
#define LCD_CURSOROFF 0x00
#define LCD_BLINKON 0x01
#define LCD_BLINKOFF 0x00
// flags for display/cursor shift
#define LCD_DISPLAYMOVE 0x08
#define LCD_CURSORMOVE 0x00
#define LCD_MOVERIGHT 0x04
#define LCD_MOVELEFT 0x00
// flags for function set
#define LCD_8BITMODE 0x10
#define LCD_4BITMODE 0x00
#define LCD_2LINE 0x08
#define LCD_1LINE 0x00
#define LCD_5x10DOTS 0x04
#define LCD_5x8DOTS 0x00
// flags for backlight control
#define LCD_BACKLIGHT 0x08
#define LCD_NOBACKLIGHT 0x00
//========================================================================
//Begin of TinyLCD Library by KD8CEC
//========================================================================
#ifdef UBITX_DISPLAY_LCD2004P
/*************************************************************************
LCD2004TINY Library for 20 x 4 LCD
Referecnce Source : LiquidCrystal.cpp
KD8CEC
This source code is modified version for small program memory
from Arduino LiquidCrystal Library
I wrote this code myself, so there is no license restriction.
So this code allows anyone to write with confidence.
But keep it as long as the original author of the code.
DE Ian KD8CEC
**************************************************************************/
#define LCD_Command(x) (LCD_Send(x, LOW))
#define LCD_Write(x) (LCD_Send(x, HIGH))
#define UBITX_DISPLAY_LCD2004_BASE
//Define connected PIN
#define LCD_PIN_RS 8
#define LCD_PIN_EN 9
uint8_t LCD_PIN_DAT[4] = {10, 11, 12, 13};
void write4bits(uint8_t value)
{
for (int i = 0; i < 4; i++)
digitalWrite(LCD_PIN_DAT[i], (value >> i) & 0x01);
digitalWrite(LCD_PIN_EN, LOW);
delayMicroseconds(1);
digitalWrite(LCD_PIN_EN, HIGH);
delayMicroseconds(1); // enable pulse must be >450ns
digitalWrite(LCD_PIN_EN, LOW);
delayMicroseconds(100); // commands need > 37us to settle
}
void LCD_Send(uint8_t value, uint8_t mode)
{
digitalWrite(LCD_PIN_RS, mode);
write4bits(value>>4);
write4bits(value);
}
void LCD2004_Init()
{
pinMode(LCD_PIN_RS, OUTPUT);
pinMode(LCD_PIN_EN, OUTPUT);
for (int i = 0; i < 4; i++)
pinMode(LCD_PIN_DAT[i], OUTPUT);
delayMicroseconds(50);
// Now we pull both RS and R/W low to begin commands
digitalWrite(LCD_PIN_RS, LOW);
digitalWrite(LCD_PIN_EN, LOW);
// we start in 8bit mode, try to set 4 bit mode
write4bits(0x03);
delayMicroseconds(4500); // wait min 4.1ms
// second try
write4bits(0x03);
delayMicroseconds(4500); // wait min 4.1ms
// third go!
write4bits(0x03);
delayMicroseconds(150);
// finally, set to 4-bit interface
write4bits(0x02);
// finally, set # lines, font size, etc.
LCD_Command(LCD_FUNCTIONSET | LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS | LCD_2LINE);
// turn the display on with no cursor or blinking default
LCD_Command(LCD_DISPLAYCONTROL | LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF);
// clear it off
LCD_Command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
delayMicroseconds(2000); // this command takes a long time!
LCD_Command(LCD_ENTRYMODESET | LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT);
}
#endif
//========================================================================
//End of TinyLCD Library by KD8CEC
//========================================================================
//========================================================================
//Begin of I2CTinyLCD Library by KD8CEC
//========================================================================
#ifdef UBITX_DISPLAY_LCD2004I
#include <Wire.h>
/*************************************************************************
I2C Tiny LCD Library
Referecnce Source : LiquidCrystal_I2C.cpp // Based on the work by DFRobot
KD8CEC
This source code is modified version for small program memory
from Arduino LiquidCrystal_I2C Library
I wrote this code myself, so there is no license restriction.
So this code allows anyone to write with confidence.
But keep it as long as the original author of the code.
Ian KD8CEC
**************************************************************************/
#define UBITX_DISPLAY_LCD2004_BASE
#define En B00000100 // Enable bit
#define Rw B00000010 // Read/Write bit
#define Rs B00000001 // Register select bit
#define LCD_Command(x) (LCD_Send(x, 0))
#define LCD_Write(x) (LCD_Send(x, Rs))
uint8_t _Addr;
uint8_t _displayfunction;
uint8_t _displaycontrol;
uint8_t _displaymode;
uint8_t _numlines;
uint8_t _cols;
uint8_t _rows;
uint8_t _backlightval;
#define printIIC(args) Wire.write(args)
void expanderWrite(uint8_t _data)
{
Wire.beginTransmission(_Addr);
printIIC((int)(_data) | _backlightval);
Wire.endTransmission();
}
void pulseEnable(uint8_t _data){
expanderWrite(_data | En); // En high
delayMicroseconds(1); // enable pulse must be >450ns
expanderWrite(_data & ~En); // En low
delayMicroseconds(50); // commands need > 37us to settle
}
void write4bits(uint8_t value)
{
expanderWrite(value);
pulseEnable(value);
}
void LCD_Send(uint8_t value, uint8_t mode)
{
uint8_t highnib=value&0xf0;
uint8_t lownib=(value<<4)&0xf0;
write4bits((highnib)|mode);
write4bits((lownib)|mode);
}
// Turn the (optional) backlight off/on
void noBacklight(void) {
_backlightval=LCD_NOBACKLIGHT;
expanderWrite(0);
}
void backlight(void) {
_backlightval=LCD_BACKLIGHT;
expanderWrite(0);
}
void LCD2004_Init()
{
//I2C Init
_Addr = I2C_LCD_MASTER_ADDRESS;
_cols = 20;
_rows = 4;
_backlightval = LCD_NOBACKLIGHT;
Wire.begin();
delay(50);
// Now we pull both RS and R/W low to begin commands
expanderWrite(_backlightval); // reset expanderand turn backlight off (Bit 8 =1)
delay(1000);
//put the LCD into 4 bit mode
// this is according to the hitachi HD44780 datasheet
// figure 24, pg 46
// we start in 8bit mode, try to set 4 bit mode
write4bits(0x03 << 4);
delayMicroseconds(4500); // wait min 4.1ms
// second try
write4bits(0x03 << 4);
delayMicroseconds(4500); // wait min 4.1ms
// third go!
write4bits(0x03 << 4);
delayMicroseconds(150);
// finally, set to 4-bit interface
write4bits(0x02 << 4);
// finally, set # lines, font size, etc.
LCD_Command(LCD_FUNCTIONSET | LCD_4BITMODE | LCD_1LINE | LCD_5x8DOTS | LCD_2LINE);
// turn the display on with no cursor or blinking default
LCD_Command(LCD_DISPLAYCONTROL | LCD_DISPLAYON | LCD_CURSOROFF | LCD_BLINKOFF);
// clear it off
LCD_Command(LCD_CLEARDISPLAY); // clear display, set cursor position to zero
//delayMicroseconds(2000); // this command takes a long time!
delayMicroseconds(1000); // this command takes a long time!
LCD_Command(LCD_ENTRYMODESET | LCD_ENTRYLEFT | LCD_ENTRYSHIFTDECREMENT);
backlight();
}
#endif
//========================================================================
//End of I2CTinyLCD Library by KD8CEC
//========================================================================
//========================================================================
// 20 X 04 LCD Routines
//Begin of Display Base Routines (Init, printLine..)
//========================================================================
#ifdef UBITX_DISPLAY_LCD2004_BASE
void LCD_Print(const char *c)
{
for (uint8_t i = 0; i < strlen(c); i++)
{
if (*(c + i) == 0x00) return;
LCD_Write(*(c + i));
}
}
const int row_offsets[] = { 0x00, 0x40, 0x14, 0x54 };
void LCD_SetCursor(uint8_t col, uint8_t row)
{
LCD_Command(LCD_SETDDRAMADDR | (col + row_offsets[row])); //0 : 0x00, 1 : 0x40, only for 20 x 4 lcd
}
void LCD_CreateChar(uint8_t location, uint8_t charmap[])
{
location &= 0x7; // we only have 8 locations 0-7
LCD_Command(LCD_SETCGRAMADDR | (location << 3));
for (int i=0; i<8; i++)
LCD_Write(charmap[i]);
}
//SWR GRAPH, DrawMeter and drawingMeter Logic function by VK2ETA
//#define OPTION_SKINNYBARS
char c[30], b[30];
char printBuff[4][21]; //mirrors what is showing on the two lines of the display
void LCD_Init(void)
{
LCD2004_Init();
initMeter(); //for Meter Display
}
// The generic routine to display one line on the LCD
void printLine(unsigned char linenmbr, const char *c) {
if ((displayOption1 & 0x01) == 0x01)
linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
if (strcmp(c, printBuff[linenmbr])) { // only refresh the display when there was a change
LCD_SetCursor(0, linenmbr); // place the cursor at the beginning of the selected line
LCD_Print(c);
strcpy(printBuff[linenmbr], c);
for (byte i = strlen(c); i < 20; i++) { // add white spaces until the end of the 20 characters line is reached
LCD_Write(' ');
}
}
}
void printLineF(char linenmbr, const __FlashStringHelper *c)
{
int i;
char tmpBuff[21];
PGM_P p = reinterpret_cast<PGM_P>(c);
for (i = 0; i < 21; i++){
unsigned char fChar = pgm_read_byte(p++);
tmpBuff[i] = fChar;
if (fChar == 0)
break;
}
printLine(linenmbr, tmpBuff);
}
#define LCD_MAX_COLUMN 20
void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex, char offsetTtype) {
if ((displayOption1 & 0x01) == 0x01)
linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
LCD_SetCursor(lcdColumn, linenmbr);
for (byte i = eepromStartIndex; i <= eepromEndIndex; i++)
{
if (++lcdColumn <= LCD_MAX_COLUMN)
LCD_Write(EEPROM.read((offsetTtype == 0 ? USER_CALLSIGN_DAT : WSPR_MESSAGE1) + i));
else
break;
}
for (byte i = lcdColumn; i < 20; i++) //Right Padding by Space
LCD_Write(' ');
}
// short cut to print to the first line
void printLine1(const char *c)
{
printLine(1,c);
}
// short cut to print to the first line
void printLine2(const char *c)
{
printLine(0,c);
}
void clearLine2()
{
printLine2("");
line2DisplayStatus = 0;
}
// short cut to print to the first line
void printLine1Clear(){
printLine(1,"");
}
// short cut to print to the first line
void printLine2Clear(){
printLine(0, "");
}
void printLine2ClearAndUpdate(){
printLine(0, "");
line2DisplayStatus = 0;
updateDisplay();
}
//==================================================================================
//End of Display Base Routines
//==================================================================================
//==================================================================================
//Begin of User Interface Routines
//==================================================================================
//Main Display
// this builds up the top line of the display with frequency and mode
void updateDisplay() {
// tks Jack Purdum W8TEE
// replaced fsprint commmands by str commands for code size reduction
// replace code for Frequency numbering error (alignment, point...) by KD8CEC
// i also Very TNX Purdum for good source code
int i;
unsigned long tmpFreq = frequency; //
memset(c, 0, sizeof(c));
if (inTx){
if (isCWAutoMode == 2) {
for (i = 0; i < 4; i++)
c[3-i] = (i < autoCWSendReservCount ? byteToChar(autoCWSendReserv[i]) : ' ');
//display Sending Index
c[4] = byteToChar(sendingCWTextIndex);
c[5] = '=';
}
else {
if (cwTimeout > 0)
strcpy(c, " CW:");
else
strcpy(c, " TX:");
}
}
else {
if (ritOn)
strcpy(c, "RIT ");
else {
if (cwMode == 0)
{
if (isUSB)
strcpy(c, "USB ");
else
strcpy(c, "LSB ");
}
else if (cwMode == 1)
{
strcpy(c, "CWL ");
}
else
{
strcpy(c, "CWU ");
}
}
if (vfoActive == VFO_A) // VFO A is active
strcat(c, "A:");
else
strcat(c, "B:");
}
//Fixed by Mitani Massaru (JE4SMQ)
if (isShiftDisplayCWFreq == 1)
{
if (cwMode == 1) //CWL
tmpFreq = tmpFreq - sideTone + shiftDisplayAdjustVal;
else if (cwMode == 2) //CWU
tmpFreq = tmpFreq + sideTone + shiftDisplayAdjustVal;
}
//display frequency
for (int i = 15; i >= 6; i--) {
if (tmpFreq > 0) {
if (i == 12 || i == 8) c[i] = '.';
else {
c[i] = tmpFreq % 10 + 0x30;
tmpFreq /= 10;
}
}
else
c[i] = ' ';
}
if (sdrModeOn)
strcat(c, " SDR");
else
strcat(c, " SPK");
//remarked by KD8CEC
//already RX/TX status display, and over index (20 x 4 LCD)
//if (inTx)
// strcat(c, " TX");
printLine(1, c);
byte diplayVFOLine = 1;
if ((displayOption1 & 0x01) == 0x01)
diplayVFOLine = 0;
if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
(vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
LCD_SetCursor(5,diplayVFOLine);
LCD_Write((uint8_t)0);
}
else if (isCWAutoMode == 2){
LCD_SetCursor(5,diplayVFOLine);
LCD_Write(0x7E);
}
else
{
LCD_SetCursor(5,diplayVFOLine);
LCD_Write(':');
}
}
char line2Buffer[20];
//KD8CEC 200Hz ST
//L14.150 200Hz ST
//U14.150 +150khz
int freqScrollPosition = 0;
//Example Line2 Optinal Display
//immediate execution, not call by scheulder
//warning : unused parameter 'displayType' <-- ignore, this is reserve
void updateLine2Buffer(char displayType)
{
unsigned long tmpFreq = 0;
if (ritOn)
{
strcpy(line2Buffer, "RitTX:");
//display frequency
tmpFreq = ritTxFrequency;
//Fixed by Mitani Massaru (JE4SMQ)
if (isShiftDisplayCWFreq == 1)
{
if (cwMode == 1) //CWL
tmpFreq = tmpFreq - sideTone + shiftDisplayAdjustVal;
else if (cwMode == 2) //CWU
tmpFreq = tmpFreq + sideTone + shiftDisplayAdjustVal;
}
for (int i = 15; i >= 6; i--) {
if (tmpFreq > 0) {
if (i == 12 || i == 8) line2Buffer[i] = '.';
else {
line2Buffer[i] = tmpFreq % 10 + 0x30;
tmpFreq /= 10;
}
}
else
line2Buffer[i] = ' ';
}
return;
} //end of ritOn display
//other VFO display
if (vfoActive == VFO_B)
{
tmpFreq = vfoA;
}
else
{
tmpFreq = vfoB;
}
// EXAMPLE 1 & 2
//U14.150.100
//display frequency
for (int i = 9; i >= 0; i--) {
if (tmpFreq > 0) {
if (i == 2 || i == 6) line2Buffer[i] = '.';
else {
line2Buffer[i] = tmpFreq % 10 + 0x30;
tmpFreq /= 10;
}
}
else
line2Buffer[i] = ' ';
}
memset(&line2Buffer[10], ' ', 10);
if (isIFShift)
{
line2Buffer[6] = 'M';
line2Buffer[7] = ' ';
//IFShift Offset Value
line2Buffer[8] = 'I';
line2Buffer[9] = 'F';
line2Buffer[10] = ifShiftValue >= 0 ? '+' : 0;
line2Buffer[11] = 0;
line2Buffer[12] = ' ';
//11, 12, 13, 14, 15
memset(b, 0, sizeof(b));
ltoa(ifShiftValue, b, DEC);
strncat(line2Buffer, b, 5);
for (int i = 12; i < 17; i++)
{
if (line2Buffer[i] == 0)
line2Buffer[i] = ' ';
}
} // end of display IF
else // step & Key Type display
{
//Step
long tmpStep = arTuneStep[tuneStepIndex -1];
byte isStepKhz = 0;
if (tmpStep >= 1000)
{
isStepKhz = 2;
}
for (int i = 14; i >= 12 - isStepKhz; i--) {
if (tmpStep > 0) {
line2Buffer[i + isStepKhz] = tmpStep % 10 + 0x30;
tmpStep /= 10;
}
else
line2Buffer[i +isStepKhz] = ' ';
}
if (isStepKhz == 0)
{
line2Buffer[15] = 'H';
line2Buffer[16] = 'z';
}
}
line2Buffer[17] = ' ';
//Check CW Key cwKeyType = 0; //0: straight, 1 : iambica, 2: iambicb
if (cwKeyType == 0)
{
line2Buffer[18] = 'S';
line2Buffer[19] = 'T';
}
else if (cwKeyType == 1)
{
line2Buffer[18] = 'I';
line2Buffer[19] = 'A';
}
else
{
line2Buffer[18] = 'I';
line2Buffer[19] = 'B';
}
}
//meterType : 0 = S.Meter, 1 : P.Meter
void DisplayMeter(byte meterType, byte meterValue, char drawPosition)
{
if (meterType == 0 || meterType == 1 || meterType == 2)
{
drawMeter(meterValue);
//int lineNumber = 0;
//if ((displayOption1 & 0x01) == 0x01)
//lineNumber = 1;
LCD_SetCursor(drawPosition, 2);
LCD_Write('S');
LCD_Write(':');
for (int i = 0; i < 6; i++) //meter 5 + +db 1 = 6
LCD_Write(lcdMeter[i]);
}
}
//meterType : 0 = S.Meter, 1 = Forward Power Meter, 2 = SWR Meter
void DisplayMeter(byte meterType, int meterValue, char drawPosition)
{
#ifdef OPTION_SKINNYBARS //We want skinny meter bars with more text/numbers
memcpy(&(line2Buffer[drawPosition]), " ", 8); //Blank that section of 8 characters first
if (meterType == 0) { //SWR meter
drawMeter(meterValue); //Only 2 characters
line2Buffer[drawPosition] = 'S';
byte sValue = round((float)meterValue * 1.5); //6 bars available only to show 9 S values
sValue = sValue > 9 ? 9 : sValue; //Max S9
line2Buffer[drawPosition + 1] = '0' + sValue; //0 to 9
memcpy(&(line2Buffer[drawPosition + 2]), lcdMeter, 2); //Copy the S-Meter bars
//Add the +10, +20, etc...
if (meterValue > 6) {
//We are over S9
line2Buffer[drawPosition + 4] = '+';
line2Buffer[drawPosition + 5] = '0' + meterValue - 6; //1,2,3 etc...
line2Buffer[drawPosition + 6] = '0';
}
} else if (meterType == 1) { //Forward Power
drawMeter(round((float)meterValue / 40)); //4 watts per bar
//meterValue contains power value x 10 (one decimal point)
line2Buffer[drawPosition] = 'P';
meterValue = meterValue > 999 ? 999 : meterValue; //Limit to 99.9 watts!!!!
//Remove decimal value and divide by 10
meterValue = round((float)meterValue / 10);
if (meterValue < 10) {
line2Buffer[drawPosition + 1] = ' ';
line2Buffer[drawPosition + 2] = '0' + meterValue; //0 to 9
} else {
line2Buffer[drawPosition + 1] = '0' + meterValue / 10;
line2Buffer[drawPosition + 2] = '0' + (meterValue - ((meterValue / 10) * 10));
}
line2Buffer[drawPosition + 3] = 'W';
memcpy(&(line2Buffer[drawPosition + 4]), lcdMeter, 2); //Copy the S-Meter bars
} else { //SWR
drawMeter((int)(((float)meterValue - 21) / 100)); //no bar = < 1.2, then 1 bar = 1.2 to 2.2, 2 bars = 2.2 to 3.2, etc...
//meterValue contains SWR x 100 (two decimal point)
memcpy(&(line2Buffer[drawPosition]), "SWR", 3);
meterValue = round((float)meterValue / 10); //We now have swr x 10 (1 decimal point)
if (meterValue < 100) { //10 to 99, no decimal point
//Draw the decimal value
line2Buffer[drawPosition + 3] = '0' + meterValue / 10;
line2Buffer[drawPosition + 4] = '.';
line2Buffer[drawPosition + 5] = '0' + (meterValue - ((meterValue / 10) * 10));
} else {
memcpy(&(line2Buffer[drawPosition + 3]), "10+", 3); //over 10
}
memcpy(&(line2Buffer[drawPosition + 6]), lcdMeter, 2); //Copy the S-Meter bars
}
#else //We want fat bars, easy to read, with less text/numbers
//Serial.print("In displaymeter, meterValue: "); Serial.println(meterValue);
drawMeter(meterValue);
//Always line 2
char sym = 'S';
if (meterType == 1) sym = 'P';
else if (meterType == 2) sym = 'R'; //For SWR
line2Buffer[drawPosition] = sym;
memcpy(&(line2Buffer[drawPosition + 1]), lcdMeter, 7);
#endif //OPTION_SKINNYBARS
}
byte testValue = 0;
char checkCount = 0;
int currentSMeter = 0;
//int sMeterLevels[] = {0, 5, 17, 41, 74, 140, 255, 365, 470};
byte scaledSMeter = 0;
char checkCountSMeter = 0;
//execute interval : 0.25sec
void idle_process()
{
//space for user graphic display
if (menuOn == 0)
{
if ((displayOption1 & 0x10) == 0x10) //always empty topline
return;
//if line2DisplayStatus == 0 <-- this condition is clear Line, you can display any message
if (line2DisplayStatus == 0 || (((displayOption1 & 0x04) == 0x04) && line2DisplayStatus == 2)) {
if (checkCount++ > 1)
{
updateLine2Buffer(0); //call by scheduler
printLine2(line2Buffer);
line2DisplayStatus = 2;
checkCount = 0;
}
}
//EX for Meters
/*
DisplayMeter(0, testValue++, 0);
if (testValue > 30)
testValue = 0;
*/
//Sample
//DisplayMeter(0, analogRead(ANALOG_SMETER) / 30, 0);
//DisplayMeter(0, analogRead(ANALOG_SMETER) / 10, 0);
//delay_background(10, 0);
//DisplayMeter(0, analogRead(ANALOG_SMETER), 0);
//if (testValue > 30)
// testValue = 0;
//S-Meter Display
if (((displayOption1 & 0x08) == 0x08 && (sdrModeOn == 0)) && (++checkCountSMeter > SMeterLatency))
{
int newSMeter;
//VK2ETA S-Meter from MAX9814 TC pin
newSMeter = analogRead(ANALOG_SMETER);
//Faster attack, Slower release
currentSMeter = (newSMeter > currentSMeter ? ((currentSMeter * 3 + newSMeter * 7) + 5) / 10 : ((currentSMeter * 7 + newSMeter * 3) + 5) / 10);
scaledSMeter = 0;
for (byte s = 8; s >= 1; s--) {
if (currentSMeter > sMeterLevels[s]) {
scaledSMeter = s;
break;
}
}
DisplayMeter(0, scaledSMeter, 0);
checkCountSMeter = 0; //Reset Latency time
} //end of S-Meter
}
}
//AutoKey LCD Display Routine
void Display_AutoKeyTextIndex(byte textIndex)
{
byte diplayAutoCWLine = 0;
if ((displayOption1 & 0x01) == 0x01)
diplayAutoCWLine = 1;
LCD_SetCursor(0, diplayAutoCWLine);
LCD_Write(byteToChar(textIndex));
LCD_Write(':');
}
void DisplayCallsign(byte callSignLength)
{
printLineFromEEPRom(3, 20 - userCallsignLength, 0, userCallsignLength -1, 0); //eeprom to lcd use offset (USER_CALLSIGN_DAT)
}
void DisplayVersionInfo(const __FlashStringHelper * fwVersionInfo)
{
printLineF(3, fwVersionInfo);
}
#endif