403 lines
10 KiB
C++
403 lines
10 KiB
C++
/**
|
|
* The user interface of the ubitx consists of the encoder, the push-button on top of it
|
|
* and the 16x2 LCD display.
|
|
* The upper line of the display is constantly used to display frequency and status
|
|
* of the radio. Occasionally, it is used to provide a two-line information that is
|
|
* quickly cleared up.
|
|
*/
|
|
//#define printLineF1(x) (printLineF(1, x))
|
|
//#define printLineF2(x) (printLineF(0, x))
|
|
|
|
//returns true if the button is pressed
|
|
int btnDown(){
|
|
if (digitalRead(FBUTTON) == HIGH)
|
|
return 0;
|
|
else
|
|
return 1;
|
|
}
|
|
|
|
/**
|
|
* Meter (not used in this build for anything)
|
|
* the meter is drawn using special characters. Each character is composed of 5 x 8 matrix.
|
|
* The s_meter array holds the definition of the these characters.
|
|
* each line of the array is is one character such that 5 bits of every byte
|
|
* makes up one line of pixels of the that character (only 5 bits are used)
|
|
* The current reading of the meter is assembled in the string called meter
|
|
*/
|
|
|
|
|
|
/*
|
|
const PROGMEM uint8_t s_meter_bitmap[] = {
|
|
B00000,B00000,B00000,B00000,B00000,B00100,B00100,B11011,
|
|
B10000,B10000,B10000,B10000,B10100,B10100,B10100,B11011,
|
|
B01000,B01000,B01000,B01000,B01100,B01100,B01100,B11011,
|
|
B00100,B00100,B00100,B00100,B00100,B00100,B00100,B11011,
|
|
B00010,B00010,B00010,B00010,B00110,B00110,B00110,B11011,
|
|
B00001,B00001,B00001,B00001,B00101,B00101,B00101,B11011
|
|
};
|
|
*/
|
|
|
|
const PROGMEM uint8_t meters_bitmap[] = {
|
|
B10000, B10000, B10000, B10000, B10000, B10000, B10000, B10000 , //custom 1
|
|
B11000, B11000, B11000, B11000, B11000, B11000, B11000, B11000 , //custom 2
|
|
B11100, B11100, B11100, B11100, B11100, B11100, B11100, B11100 , //custom 3
|
|
B11110, B11110, B11110, B11110, B11110, B11110, B11110, B11110 , //custom 4
|
|
B11111, B11111, B11111, B11111, B11111, B11111, B11111, B11111 , //custom 5
|
|
B01000, B11100, B01000, B00000, B10111, B10101, B10101, B10111 //custom 6
|
|
};
|
|
|
|
PGM_P p_metes_bitmap = reinterpret_cast<PGM_P>(meters_bitmap);
|
|
|
|
const PROGMEM uint8_t lock_bitmap[8] = {
|
|
0b01110,
|
|
0b10001,
|
|
0b10001,
|
|
0b11111,
|
|
0b11011,
|
|
0b11011,
|
|
0b11111,
|
|
0b00000};
|
|
PGM_P plock_bitmap = reinterpret_cast<PGM_P>(lock_bitmap);
|
|
|
|
|
|
// initializes the custom characters
|
|
// we start from char 1 as char 0 terminates the string!
|
|
void initMeter(){
|
|
uint8_t tmpbytes[8];
|
|
byte i;
|
|
|
|
for (i = 0; i < 8; i++)
|
|
tmpbytes[i] = pgm_read_byte(plock_bitmap + i);
|
|
lcd.createChar(0, tmpbytes);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i);
|
|
lcd.createChar(1, tmpbytes);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 8);
|
|
lcd.createChar(2, tmpbytes);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 16);
|
|
lcd.createChar(3, tmpbytes);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 24);
|
|
lcd.createChar(4, tmpbytes);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 32);
|
|
lcd.createChar(5, tmpbytes);
|
|
|
|
for (i = 0; i < 8; i++)
|
|
tmpbytes[i] = pgm_read_byte(p_metes_bitmap + i + 40);
|
|
lcd.createChar(6, tmpbytes);
|
|
}
|
|
|
|
//by KD8CEC
|
|
//0 ~ 25 : 30 over : + 10
|
|
void drawMeter(int needle) {
|
|
//5Char + O over
|
|
int drawCharLength = needle / 5;
|
|
int drawCharLengthLast = needle % 5;
|
|
int i;
|
|
|
|
for (i = 0; i < 5; i++) {
|
|
if (needle >= 5)
|
|
lcdMeter[i] = 5; //full
|
|
else if (needle > 0)
|
|
lcdMeter[i] = needle; //full
|
|
else //0
|
|
lcdMeter[i] = 0x20;
|
|
|
|
needle -= 5;
|
|
}
|
|
|
|
if (needle > 0)
|
|
lcdMeter[5] = 6;
|
|
else
|
|
lcdMeter[5] = 0x20;
|
|
}
|
|
|
|
/*
|
|
void drawMeter(int8_t needle){
|
|
int16_t best, i, s;
|
|
|
|
if (needle < 0)
|
|
return;
|
|
|
|
s = (needle * 4)/10;
|
|
for (i = 0; i < 8; i++){
|
|
if (s >= 5)
|
|
lcdMeter[i] = 1;
|
|
else if (s >= 0)
|
|
lcdMeter[i] = 2 + s;
|
|
else
|
|
lcdMeter[i] = 1;
|
|
s = s - 5;
|
|
}
|
|
if (needle >= 40)
|
|
lcdMeter[i-1] = 6;
|
|
lcdMeter[i] = 0;
|
|
}
|
|
*/
|
|
// The generic routine to display one line on the LCD
|
|
void printLine(unsigned char linenmbr, const char *c) {
|
|
if ((displayOption1 & 0x01) == 0x01)
|
|
linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
|
|
|
|
if (strcmp(c, printBuff[linenmbr])) { // only refresh the display when there was a change
|
|
lcd.setCursor(0, linenmbr); // place the cursor at the beginning of the selected line
|
|
lcd.print(c);
|
|
strcpy(printBuff[linenmbr], c);
|
|
|
|
for (byte i = strlen(c); i < 16; i++) { // add white spaces until the end of the 16 characters line is reached
|
|
lcd.print(' ');
|
|
}
|
|
}
|
|
}
|
|
|
|
void printLineF(char linenmbr, const __FlashStringHelper *c)
|
|
{
|
|
int i;
|
|
char tmpBuff[17];
|
|
PGM_P p = reinterpret_cast<PGM_P>(c);
|
|
|
|
for (i = 0; i < 17; i++){
|
|
unsigned char fChar = pgm_read_byte(p++);
|
|
tmpBuff[i] = fChar;
|
|
if (fChar == 0)
|
|
break;
|
|
}
|
|
|
|
printLine(linenmbr, tmpBuff);
|
|
}
|
|
|
|
#define LCD_MAX_COLUMN 16
|
|
void printLineFromEEPRom(char linenmbr, char lcdColumn, byte eepromStartIndex, byte eepromEndIndex) {
|
|
if ((displayOption1 & 0x01) == 0x01)
|
|
linenmbr = (linenmbr == 0 ? 1 : 0); //Line Toggle
|
|
|
|
lcd.setCursor(lcdColumn, linenmbr);
|
|
|
|
for (byte i = eepromStartIndex; i <= eepromEndIndex; i++)
|
|
{
|
|
if (++lcdColumn <= LCD_MAX_COLUMN)
|
|
lcd.write(EEPROM.read(USER_CALLSIGN_DAT + i));
|
|
else
|
|
break;
|
|
}
|
|
|
|
for (byte i = lcdColumn; i < 16; i++) //Right Padding by Space
|
|
lcd.write(' ');
|
|
}
|
|
|
|
// short cut to print to the first line
|
|
void printLine1(const char *c){
|
|
printLine(1,c);
|
|
}
|
|
// short cut to print to the first line
|
|
void printLine2(const char *c){
|
|
printLine(0,c);
|
|
}
|
|
|
|
void clearLine2()
|
|
{
|
|
printLine2("");
|
|
line2DisplayStatus = 0;
|
|
}
|
|
|
|
// short cut to print to the first line
|
|
void printLine1Clear(){
|
|
printLine(1,"");
|
|
}
|
|
// short cut to print to the first line
|
|
void printLine2Clear(){
|
|
printLine(0, "");
|
|
}
|
|
|
|
void printLine2ClearAndUpdate(){
|
|
printLine(0, "");
|
|
line2DisplayStatus = 0;
|
|
updateDisplay();
|
|
}
|
|
|
|
//012...89ABC...Z
|
|
char byteToChar(byte srcByte){
|
|
if (srcByte < 10)
|
|
return 0x30 + srcByte;
|
|
else
|
|
return 'A' + srcByte - 10;
|
|
}
|
|
|
|
// this builds up the top line of the display with frequency and mode
|
|
void updateDisplay() {
|
|
// tks Jack Purdum W8TEE
|
|
// replaced fsprint commmands by str commands for code size reduction
|
|
|
|
// replace code for Frequency numbering error (alignment, point...) by KD8CEC
|
|
int i;
|
|
unsigned long tmpFreq = frequency; //
|
|
|
|
memset(c, 0, sizeof(c));
|
|
|
|
if (inTx){
|
|
if (isCWAutoMode == 2) {
|
|
for (i = 0; i < 4; i++)
|
|
c[3-i] = (i < autoCWSendReservCount ? byteToChar(autoCWSendReserv[i]) : ' ');
|
|
|
|
//display Sending Index
|
|
c[4] = byteToChar(sendingCWTextIndex);
|
|
c[5] = '=';
|
|
}
|
|
else {
|
|
if (cwTimeout > 0)
|
|
strcpy(c, " CW:");
|
|
else
|
|
strcpy(c, " TX:");
|
|
}
|
|
}
|
|
else {
|
|
if (ritOn)
|
|
strcpy(c, "RIT ");
|
|
else {
|
|
if (cwMode == 0)
|
|
{
|
|
if (isUSB)
|
|
strcpy(c, "USB ");
|
|
else
|
|
strcpy(c, "LSB ");
|
|
}
|
|
else if (cwMode == 1)
|
|
{
|
|
strcpy(c, "CWL ");
|
|
}
|
|
else
|
|
{
|
|
strcpy(c, "CWU ");
|
|
}
|
|
}
|
|
if (vfoActive == VFO_A) // VFO A is active
|
|
strcat(c, "A:");
|
|
else
|
|
strcat(c, "B:");
|
|
}
|
|
|
|
//display frequency
|
|
for (int i = 15; i >= 6; i--) {
|
|
if (tmpFreq > 0) {
|
|
if (i == 12 || i == 8) c[i] = '.';
|
|
else {
|
|
c[i] = tmpFreq % 10 + 0x30;
|
|
tmpFreq /= 10;
|
|
}
|
|
}
|
|
else
|
|
c[i] = ' ';
|
|
}
|
|
|
|
//remarked by KD8CEC
|
|
//already RX/TX status display, and over index (16 x 2 LCD)
|
|
//if (inTx)
|
|
// strcat(c, " TX");
|
|
printLine(1, c);
|
|
|
|
byte diplayVFOLine = 1;
|
|
if ((displayOption1 & 0x01) == 0x01)
|
|
diplayVFOLine = 0;
|
|
|
|
if ((vfoActive == VFO_A && ((isDialLock & 0x01) == 0x01)) ||
|
|
(vfoActive == VFO_B && ((isDialLock & 0x02) == 0x02))) {
|
|
lcd.setCursor(5,diplayVFOLine);
|
|
lcd.write((uint8_t)0);
|
|
}
|
|
else if (isCWAutoMode == 2){
|
|
lcd.setCursor(5,diplayVFOLine);
|
|
lcd.write(0x7E);
|
|
}
|
|
else
|
|
{
|
|
lcd.setCursor(5,diplayVFOLine);
|
|
lcd.write(":");
|
|
}
|
|
|
|
/*
|
|
//now, the second line
|
|
memset(c, 0, sizeof(c));
|
|
memset(b, 0, sizeof(b));
|
|
|
|
if (inTx)
|
|
strcat(c, "TX ");
|
|
else if (ritOn)
|
|
strcpy(c, "RIT");
|
|
|
|
strcpy(c, " \xff");
|
|
drawMeter(meter_reading);
|
|
strcat(c, meter);
|
|
strcat(c, "\xff");
|
|
printLine2(c);*/
|
|
}
|
|
|
|
int enc_prev_state = 3;
|
|
|
|
/**
|
|
* The A7 And A6 are purely analog lines on the Arduino Nano
|
|
* These need to be pulled up externally using two 10 K resistors
|
|
*
|
|
* There are excellent pages on the Internet about how these encoders work
|
|
* and how they should be used. We have elected to use the simplest way
|
|
* to use these encoders without the complexity of interrupts etc to
|
|
* keep it understandable.
|
|
*
|
|
* The enc_state returns a two-bit number such that each bit reflects the current
|
|
* value of each of the two phases of the encoder
|
|
*
|
|
* The enc_read returns the number of net pulses counted over 50 msecs.
|
|
* If the puluses are -ve, they were anti-clockwise, if they are +ve, the
|
|
* were in the clockwise directions. Higher the pulses, greater the speed
|
|
* at which the enccoder was spun
|
|
*/
|
|
|
|
byte enc_state (void) {
|
|
return (analogRead(ENC_A) > 500 ? 1 : 0) + (analogRead(ENC_B) > 500 ? 2: 0);
|
|
}
|
|
|
|
int enc_read(void) {
|
|
int result = 0;
|
|
byte newState;
|
|
int enc_speed = 0;
|
|
|
|
unsigned long start_at = millis();
|
|
|
|
while (millis() - start_at < 50) { // check if the previous state was stable
|
|
newState = enc_state(); // Get current state
|
|
|
|
if (newState != enc_prev_state)
|
|
delay (1);
|
|
|
|
if (enc_state() != newState || newState == enc_prev_state)
|
|
continue;
|
|
//these transitions point to the encoder being rotated anti-clockwise
|
|
if ((enc_prev_state == 0 && newState == 2) ||
|
|
(enc_prev_state == 2 && newState == 3) ||
|
|
(enc_prev_state == 3 && newState == 1) ||
|
|
(enc_prev_state == 1 && newState == 0)){
|
|
result--;
|
|
}
|
|
//these transitions point o the enccoder being rotated clockwise
|
|
if ((enc_prev_state == 0 && newState == 1) ||
|
|
(enc_prev_state == 1 && newState == 3) ||
|
|
(enc_prev_state == 3 && newState == 2) ||
|
|
(enc_prev_state == 2 && newState == 0)){
|
|
result++;
|
|
}
|
|
enc_prev_state = newState; // Record state for next pulse interpretation
|
|
enc_speed++;
|
|
delay(1);
|
|
}
|
|
return(result);
|
|
}
|
|
|
|
|