Before Release V1.096

This commit is contained in:
phdlee 2018-07-28 18:53:28 +09:00
parent 4ee3631db0
commit 7c1ee29500
5 changed files with 74 additions and 21 deletions

View File

@ -103,7 +103,7 @@ uint16_t _rx_delay_intrabit;
//Customize for uBITX Protocol
int8_t receiveIndex = 0;
int8_t receivedCommandLength = 0;
uint8_t receivedCommandLength = 0;
int8_t ffCount = 0;
//Values for Receive Buffer

View File

@ -76,6 +76,32 @@ extern byte I2C_LCD_SECOND_ADDRESS; //only using Dual LCD Mode
#define FN_ADCMONITOR 1 //516
#define FN_TXONOFF 1 //58
/*
//Test Configuration (88%)
#define FN_BAND 0 //592
#define FN_VFO_TOGGLE 0 //78
#define FN_MODE 0 //20
#define FN_RIT 0 //58
#define FN_SPLIT 0 //62
#define FN_IFSHIFT 0 //238
#define FN_ATT 0 //128
#define FN_CW_SPEED 1 //152
#define FN_VFOTOMEM 0 //254
#define FN_MEMTOVFO 0 //188
#define FN_MEMORYKEYER 1 //156
#define FN_WSPR 0 //1044
#define FN_SDRMODE 1 //68
#define FN_CALIBRATION 1 //666
#define FN_CARRIER 1 //382
#define FN_CWCARRIER 1 //346
#define FN_CWTONE 1 //148
#define FN_CWDELAY 1 //98
#define FN_TXCWDELAY 1 //94
#define FN_KEYTYPE 1 //168
#define FN_ADCMONITOR 1 //516
#define FN_TXONOFF 1 //58
*/
/*
//Recommended Character LCD Developer 87%
#define FN_BAND 1 //592

View File

@ -1,4 +1,4 @@
//Firmware Version
//Firmware Version
//+ : This symbol identifies the firmware.
// It was originally called 'CEC V1.072' but it is too long to waste the LCD window.
// I do not want to make this Firmware users's uBITX messy with my callsign.
@ -1255,6 +1255,8 @@ void setup()
initSettings();
initPorts();
#ifndef USE_SW_SERIAL
//for Chracter LCD
if (userCallsignLength > 0 && ((userCallsignLength & 0x80) == 0x80)) {
userCallsignLength = userCallsignLength & 0x7F;
DisplayCallsign(userCallsignLength);
@ -1264,7 +1266,7 @@ void setup()
delay(500);
clearLine2();
}
#endif
#ifdef FACTORY_RECOVERY_BOOTUP
if (btnDown())

View File

@ -56,7 +56,6 @@ void LCDNextion_Init()
void LCD_Init(void)
{
LCDNextion_Init();
//initMeter(); //for Meter Display
}
//===================================================================
@ -113,16 +112,16 @@ byte L_scaledSMeter; //scaledSMeter
#define CMD_SIDE_TONE 't' //vt
unsigned long L_sideTone; //sideTone
#define CMD_KEY_TYPE 'k' //ck
byte L_cwKeyType; //L_cwKeyType 0: straight, 1 : iambica, 2: iambicb
byte L_cwKeyType = -1; //L_cwKeyType 0: straight, 1 : iambica, 2: iambicb
#define CMD_CW_SPEED 's' //vs
unsigned int L_cwSpeed; //cwSpeed
#define CMD_CW_DELAY 'y' //vy
byte L_cwDelayTime; //cwDelayTime
byte L_cwDelayTime=-1; //cwDelayTime
#define CMD_CW_STARTDELAY 'e' //ve
byte L_delayBeforeCWStartTime; //byte delayBeforeCWStartTime
byte L_delayBeforeCWStartTime=-1; //byte delayBeforeCWStartTime
#define CMD_ATT_LEVEL 'f' //vf
byte L_attLevel;
@ -188,6 +187,9 @@ byte L_displayOption2; //byte displayOption2 (Reserve)
#define TS_CMD_SPECTRUMOPT 15 //Option for Spectrum
#define TS_CMD_SPECTRUM 16 //Get Spectrum Value
#define TS_CMD_TUNESTEP 17 //Get Spectrum Value
#define TS_CMD_WPM 18 //Set WPM
#define TS_CMD_KEYTYPE 19 //Set KeyType
#define TS_CMD_SWTRIG 21 //SW Action Trigger for WSPR and more
#define TS_CMD_READMEM 31 //Read EEProm
#define TS_CMD_WRITEMEM 32 //Write EEProm
@ -316,7 +318,7 @@ void SendEEPromData(char varIndex, int eepromStartIndex, int eepromEndIndex, cha
SWSerial_Write(0xFF);
}
char softBuff1Num[14] = {'p', 'm', '.', 'c', '0', '.', 'v', 'a', 'l', '=', 0, 0xFF, 0xFF, 0xFF};
uint8_t softBuff1Num[14] = {'p', 'm', '.', 'c', '0', '.', 'v', 'a', 'l', '=', 0, 0xFF, 0xFF, 0xFF};
void SendCommand1Num(char varType, char sendValue) //0~9 : Mode, nowDisp, ActiveVFO, IsDialLock, IsTxtType, IsSplitType
{
softBuff1Num[4] = varType;
@ -876,7 +878,27 @@ void SWS_Process(void)
}
else if (commandType == TS_CMD_TUNESTEP) //Set Tune Step
{
tuneStepIndex = swr_buffer[commandStartIndex + 4]; //Tune Step Index
tuneStepIndex = swr_buffer[commandStartIndex + 4]; //Tune Step Index
}
else if (commandType == TS_CMD_WPM) //Set WPM
{
cwSpeed = swr_buffer[commandStartIndex + 4]; //
}
else if (commandType == TS_CMD_KEYTYPE) //Set Key Type
{
cwKeyType = swr_buffer[commandStartIndex + 4];
//for reduce program memory
Iambic_Key = cwKeyType != 0;
//if (cwKeyType == 0)
// Iambic_Key = false;
//else
//Iambic_Key = true;
if (cwKeyType == 1)
keyerControl &= ~IAMBICB;
else
keyerControl |= IAMBICB;
//}
}
else if (commandType == TS_CMD_SWTRIG)
{
@ -968,11 +990,11 @@ void idle_process()
//S-Meter Display
if (((displayOption1 & 0x08) == 0x08 && (sdrModeOn == 0)) && (++checkCountSMeter > SMeterLatency))
{
int newSMeter;
#ifdef USE_I2CSMETER
scaledSMeter = GetI2CSmeterValue(I2CMETER_CALCS);
#else
int newSMeter;
//VK2ETA S-Meter from MAX9814 TC pin
newSMeter = analogRead(ANALOG_SMETER) / 4;
@ -999,6 +1021,10 @@ void idle_process()
//When boot time, send data
void SendUbitxData(void)
{
//Wait for ready other device (LCD, DSP and more)
//delay(500);
delay_background(500, 2);
SendCommandL(CMD_AR_TUNE1, arTuneStep[0]);
SendCommandL(CMD_AR_TUNE2, arTuneStep[1]);
SendCommandL(CMD_AR_TUNE3, arTuneStep[2]);
@ -1014,7 +1040,7 @@ void SendUbitxData(void)
EEPROM.get(EXTERNAL_DEVICE_OPT1, nextionDisplayOption);
SendCommandUL(CMD_DISP_OPTION2, nextionDisplayOption);
SendCommandStr(CMD_VERSION, "+v1.097"); //Version
SendCommandStr(CMD_VERSION, (char *)("+v1.097")); //Version
SendEEPromData(CMD_CALLSIGN, 0, userCallsignLength -1, 0);
/*

View File

@ -285,17 +285,16 @@ int GetI2CSmeterValue(int valueType)
}
Wire.requestFrom(I2CMETER_ADDR, 1);
for (int i = 0; i < 100; i++)
if (Wire.available() > 0)
{
if (Wire.available() > 0)
{
return Wire.read();
}
else
{
delay(1);
}
return Wire.read();
}
//else
//{
// delay(10);
// return Wire.read();
//}
}