add function adjust CW ADC Range
This commit is contained in:
phdlee
parent
4506ff1c1b
commit
cc7dd752e6
@ -161,14 +161,17 @@ int count = 0; //to generally count ticks, loops, etc
|
||||
#define TUNING_STEP 342 //TUNING STEP * 6 (index 1 + STEPS 5)
|
||||
|
||||
//for reduce cw key error, eeprom address
|
||||
#define CW_ADC_ST_FROM 348 //CW ADC Range STRAIGHT KEY from
|
||||
#define CW_ADC_ST_TO 349 //CW ADC Range STRAIGHT KEY to
|
||||
#define CW_ADC_DOT_FROM 350 //CW ADC Range DOT from
|
||||
#define CW_ADC_DOT_TO 351 //CW ADC Range DOT to
|
||||
#define CW_ADC_DASH_FROM 352 //CW ADC Range DASH from
|
||||
#define CW_ADC_DASH_TO 353 //CW ADC Range DASH to
|
||||
#define CW_ADC_BOTH_FROM 354 //CW ADC Range BOTH from
|
||||
#define CW_ADC_BOTH_TO 355 //CW ADC Range BOTH to
|
||||
#define CW_ADC_MOST_BIT1 348 //most 2bits of DOT_TO , DOT_FROM, ST_TO, ST_FROM
|
||||
#define CW_ADC_ST_FROM 349 //CW ADC Range STRAIGHT KEY from (Lower 8 bit)
|
||||
#define CW_ADC_ST_TO 350 //CW ADC Range STRAIGHT KEY to (Lower 8 bit)
|
||||
#define CW_ADC_DOT_FROM 351 //CW ADC Range DOT from (Lower 8 bit)
|
||||
#define CW_ADC_DOT_TO 352 //CW ADC Range DOT to (Lower 8 bit)
|
||||
|
||||
#define CW_ADC_MOST_BIT2 353 //most 2bits of BOTH_TO, BOTH_FROM, DASH_TO, DASH_FROM
|
||||
#define CW_ADC_DASH_FROM 354 //CW ADC Range DASH from (Lower 8 bit)
|
||||
#define CW_ADC_DASH_TO 355 //CW ADC Range DASH to (Lower 8 bit)
|
||||
#define CW_ADC_BOTH_FROM 356 //CW ADC Range BOTH from (Lower 8 bit)
|
||||
#define CW_ADC_BOTH_TO 357 //CW ADC Range BOTH to (Lower 8 bit)
|
||||
|
||||
//Check Firmware type and version
|
||||
#define FIRMWAR_ID_ADDR 776 //776 : 0x59, 777 :0x58, 778 : 0x68 : Id Number, if not found id, erase eeprom(32~1023) for prevent system error.
|
||||
@ -256,14 +259,14 @@ byte arTuneStep[5];
|
||||
byte tuneStepIndex; //default Value 0, start Offset is 0 because of check new user
|
||||
|
||||
//CW ADC Range
|
||||
byte cwAdcSTFrom = 0;
|
||||
byte cwAdcSTTo = 0;
|
||||
byte cwAdcDotFrom = 0;
|
||||
byte cwAdcDotTo = 0;
|
||||
byte cwAdcDashtFrom = 0;
|
||||
byte cwAdcDashTo = 0;
|
||||
byte cwAdcBothFrom = 0;
|
||||
byte cwAdcBothTo = 0;
|
||||
int cwAdcSTFrom = 0;
|
||||
int cwAdcSTTo = 0;
|
||||
int cwAdcDotFrom = 0;
|
||||
int cwAdcDotTo = 0;
|
||||
int cwAdcDashFrom = 0;
|
||||
int cwAdcDashTo = 0;
|
||||
int cwAdcBothFrom = 0;
|
||||
int cwAdcBothTo = 0;
|
||||
|
||||
//Variables for auto cw mode
|
||||
byte isCWAutoMode = 0; //0 : none, 1 : CW_AutoMode_Menu_Selection, 2 : CW_AutoMode Sending
|
||||
@ -813,17 +816,18 @@ void initSettings(){
|
||||
|
||||
//CW Key ADC Range ======= adjust set value for reduce cw keying error
|
||||
//by KD8CEC
|
||||
EEPROM.get(CW_ADC_ST_FROM, cwAdcSTFrom);
|
||||
EEPROM.get(CW_ADC_ST_TO, cwAdcSTTo);
|
||||
|
||||
EEPROM.get(CW_ADC_DOT_FROM, cwAdcDotFrom);
|
||||
EEPROM.get(CW_ADC_DOT_TO, cwAdcDotTo);
|
||||
unsigned int tmpMostBits = 0;
|
||||
tmpMostBits = EEPROM.read(CW_ADC_MOST_BIT1);
|
||||
cwAdcSTFrom = EEPROM.read(CW_ADC_ST_FROM) | ((tmpMostBits & 0x03) << 8);
|
||||
cwAdcSTTo = EEPROM.read(CW_ADC_ST_TO) | ((tmpMostBits & 0x0C) << 6);
|
||||
cwAdcDotFrom = EEPROM.read(CW_ADC_DOT_FROM) | ((tmpMostBits & 0x30) << 4);
|
||||
cwAdcDotTo = EEPROM.read(CW_ADC_DOT_TO) | ((tmpMostBits & 0xC0) << 2);
|
||||
|
||||
EEPROM.get(CW_ADC_DASH_FROM, cwAdcDashtFrom);
|
||||
EEPROM.get(CW_ADC_DASH_TO, cwAdcDashTo);
|
||||
|
||||
EEPROM.get(CW_ADC_BOTH_FROM, cwAdcBothFrom);
|
||||
EEPROM.get(CW_ADC_BOTH_TO, cwAdcBothTo);
|
||||
tmpMostBits = EEPROM.read(CW_ADC_MOST_BIT2);
|
||||
cwAdcDashFrom = EEPROM.read(CW_ADC_DASH_FROM) | ((tmpMostBits & 0x03) << 8);
|
||||
cwAdcDashTo = EEPROM.read(CW_ADC_DASH_TO) | ((tmpMostBits & 0x0C) << 6);
|
||||
cwAdcBothFrom = EEPROM.read(CW_ADC_BOTH_FROM) | ((tmpMostBits & 0x30) << 4);
|
||||
cwAdcBothTo = EEPROM.read(CW_ADC_BOTH_TO) | ((tmpMostBits & 0xC0) << 2);
|
||||
|
||||
//default Value (for original hardware)
|
||||
if (cwAdcSTFrom >= cwAdcSTTo)
|
||||
@ -843,13 +847,13 @@ void initSettings(){
|
||||
cwAdcDotFrom = 301;
|
||||
cwAdcDotTo = 600;
|
||||
}
|
||||
if (cwAdcDashtFrom >= cwAdcDashTo)
|
||||
if (cwAdcDashFrom >= cwAdcDashTo)
|
||||
{
|
||||
cwAdcDashtFrom = 601;
|
||||
cwAdcDashFrom = 601;
|
||||
cwAdcDashTo = 800;
|
||||
}
|
||||
//end of CW Keying Variables
|
||||
|
||||
|
||||
if (cwDelayTime < 1 || cwDelayTime > 250)
|
||||
cwDelayTime = 60;
|
||||
|
||||
|
||||
@ -98,20 +98,15 @@ unsigned char keyerState = IDLE;
|
||||
//Below is a test to reduce the keying error. do not delete lines
|
||||
//create by KD8CEC for compatible with new CW Logic
|
||||
char update_PaddleLatch(byte isUpdateKeyState) {
|
||||
int paddle = analogRead(ANALOG_KEYER);
|
||||
unsigned char tmpKeyerControl;
|
||||
int paddle = analogRead(ANALOG_KEYER);
|
||||
|
||||
//if (paddle > 800) // above 4v is up
|
||||
// tmpKeyerControl = 0;
|
||||
//else if (paddle > 600) // 4-3v is DASH
|
||||
if (paddle > cwAdcDashtFrom && cwAdcDashTo < 700) // 4-3v is DASH
|
||||
if (paddle > cwAdcDashFrom && paddle < cwAdcDashTo)
|
||||
tmpKeyerControl |= DAH_L;
|
||||
//else if (paddle > 300) //1-2v is DOT
|
||||
else if (paddle > cwAdcDotFrom && paddle < cwAdcDotTo) //1-2v is DOT
|
||||
else if (paddle > cwAdcDotFrom && paddle < cwAdcDotTo)
|
||||
tmpKeyerControl |= DIT_L;
|
||||
//else if (paddle > 50)
|
||||
else if (paddle > cwAdcBothFrom && paddle < cwAdcBothTo)
|
||||
tmpKeyerControl |= (DAH_L | DIT_L) ; //both are between 1 and 2v
|
||||
tmpKeyerControl |= (DAH_L | DIT_L) ;
|
||||
else
|
||||
{
|
||||
if (Iambic_Key)
|
||||
@ -122,52 +117,11 @@ char update_PaddleLatch(byte isUpdateKeyState) {
|
||||
tmpKeyerControl = 0 ;
|
||||
}
|
||||
|
||||
tmpKeyerControl = 0 ; //STRAIGHT KEY in original code
|
||||
//keyerControl |= (DAH_L | DIT_L) ; //STRAIGHT KEY in original code
|
||||
|
||||
if (isUpdateKeyState == 1) {
|
||||
keyerControl |= tmpKeyerControl;
|
||||
}
|
||||
|
||||
byte buff[17];
|
||||
sprintf(buff, "Key : %d", paddle);
|
||||
if (tmpKeyerControl > 0)
|
||||
printLine2(buff);
|
||||
|
||||
return tmpKeyerControl;
|
||||
|
||||
//if (analogRead(ANALOG_DOT) < 600 ) keyerControl |= DIT_L;
|
||||
//if (analogRead(ANALOG_DASH) < 600 ) keyerControl |= DAH_L;
|
||||
}
|
||||
|
||||
/*
|
||||
//create by KD8CEC for compatible with new CW Logic
|
||||
char update_PaddleLatch(byte isUpdateKeyState) {
|
||||
int paddle = analogRead(ANALOG_KEYER);
|
||||
unsigned char tmpKeyerControl;
|
||||
|
||||
if (paddle > 800) // above 4v is up
|
||||
tmpKeyerControl = 0;
|
||||
else if (paddle > 600) // 4-3v is DASH
|
||||
tmpKeyerControl |= DAH_L;
|
||||
else if (paddle > 300) //1-2v is DOT
|
||||
tmpKeyerControl |= DIT_L;
|
||||
else if (paddle > 50)
|
||||
tmpKeyerControl |= (DAH_L | DIT_L) ; //both are between 1 and 2v
|
||||
else
|
||||
{ //STRAIGHT KEY in original code
|
||||
if (Iambic_Key)
|
||||
tmpKeyerControl = 0 ;
|
||||
else
|
||||
tmpKeyerControl = DIT_L ;
|
||||
}
|
||||
|
||||
if (isUpdateKeyState == 1)
|
||||
keyerControl |= tmpKeyerControl;
|
||||
|
||||
return tmpKeyerControl;
|
||||
}
|
||||
*/
|
||||
|
||||
/*****************************************************************************
|
||||
// New logic, by RON
|
||||
@ -187,10 +141,6 @@ while(continue_loop){
|
||||
tmpKeyControl = update_PaddleLatch(0);
|
||||
if ( tmpKeyControl == DAH_L || tmpKeyControl == DIT_L ||
|
||||
tmpKeyControl == (DAH_L | DIT_L) || (keyerControl & 0x03)) {
|
||||
//DIT or DASH or current state DIT & DASH
|
||||
//(analogRead(ANALOG_DOT) < 600) || //DIT
|
||||
//(analogRead(ANALOG_DASH) < 600) || //DIT
|
||||
// (keyerControl & 0x03)) {
|
||||
update_PaddleLatch(1);
|
||||
keyerState = CHK_DIT;
|
||||
}else{
|
||||
|
||||
Loading…
Reference in New Issue
Block a user