923 lines
21 KiB
C++
923 lines
21 KiB
C++
/** Menus
|
|
* The Radio menus are accessed by tapping on the function button.
|
|
* - The main loop() constantly looks for a button press and calls doMenu() when it detects
|
|
* a function button press.
|
|
* - As the encoder is rotated, at every 10th pulse, the next or the previous menu
|
|
* item is displayed. Each menu item is controlled by it's own function.
|
|
* - Eache menu function may be called to display itself
|
|
* - Each of these menu routines is called with a button parameter.
|
|
* - The btn flag denotes if the menu itme was clicked on or not.
|
|
* - If the menu item is clicked on, then it is selected,
|
|
* - If the menu item is NOT clicked on, then the menu's prompt is to be displayed
|
|
*/
|
|
#define printLineF1(x) (printLineF(1, x))
|
|
#define printLineF2(x) (printLineF(0, x))
|
|
|
|
void menuBand(int btn){
|
|
int knob = 0;
|
|
int stepChangeCount = 0;
|
|
byte btnPressCount = 0;
|
|
|
|
if (!btn){
|
|
printLineF2(F("Band Select?"));
|
|
return;
|
|
}
|
|
|
|
printLineF2(F("Press to confirm"));
|
|
//wait for the button menu select button to be lifted)
|
|
while (btnDown()) {
|
|
delay(50);
|
|
Check_Cat(0); //To prevent disconnections
|
|
if (btnPressCount++ > 20) {
|
|
btnPressCount = 0;
|
|
if (tuneTXType > 0) { //Just toggle 0 <-> 2, if tuneTXType is 100, 100 -> 0 -> 2
|
|
tuneTXType = 0;
|
|
printLineF2(F("Full range mode"));
|
|
}
|
|
else {
|
|
tuneTXType = 2;
|
|
printLineF2(F("Ham band mode"));
|
|
}
|
|
delay_background(1000, 0);
|
|
printLine2ClearAndUpdate();
|
|
printLineF2(F("Press to confirm"));
|
|
}
|
|
}
|
|
|
|
char currentBandIndex = -1;
|
|
//Save Band Information
|
|
if (tuneTXType == 2 || tuneTXType == 3 || tuneTXType == 102 || tuneTXType == 103) { //only ham band move
|
|
//Get Now Band Index
|
|
currentBandIndex = getIndexHambanBbyFreq(frequency);
|
|
|
|
if (currentBandIndex >= 0) {
|
|
//Save Frequency to Band Frequncy Record
|
|
saveBandFreqByIndex(frequency, modeToByte(), currentBandIndex);
|
|
}
|
|
}
|
|
|
|
delay(50);
|
|
ritDisable();
|
|
|
|
while(!btnDown()){
|
|
|
|
knob = enc_read();
|
|
if (knob != 0){
|
|
/*
|
|
if (band > 3 && knob < 0)
|
|
band--;
|
|
if (band < 30 && knob > 0)
|
|
band++;
|
|
if (band > 10)
|
|
isUSB = true;
|
|
else
|
|
isUSB = false;
|
|
setFrequency(((unsigned long)band * 1000000l) + offset); */
|
|
if (tuneTXType == 2 || tuneTXType == 3 || tuneTXType == 102 || tuneTXType == 103) { //only ham band move
|
|
if (knob < 0) {
|
|
if (stepChangeCount-- < -3) {
|
|
setNextHamBandFreq(frequency, -1); //Prior Band
|
|
stepChangeCount = 0;
|
|
}
|
|
}
|
|
else if (knob > 0) {
|
|
if (stepChangeCount++ > 3) {
|
|
setNextHamBandFreq(frequency, 1); //Next Band
|
|
stepChangeCount = 0;
|
|
}
|
|
}
|
|
}
|
|
else { //original source
|
|
if (knob < 0 && frequency > 3000000l)
|
|
setFrequency(frequency - 200000l);
|
|
if (knob > 0 && frequency < 30000000l)
|
|
setFrequency(frequency + 200000l);
|
|
|
|
if (frequency > 10000000l)
|
|
isUSB = true;
|
|
else
|
|
isUSB = false;
|
|
}
|
|
|
|
updateDisplay();
|
|
}
|
|
|
|
delay(20);
|
|
Check_Cat(0); //To prevent disconnections
|
|
}
|
|
|
|
while(btnDown()) {
|
|
delay(50);
|
|
Check_Cat(0); //To prevent disconnections
|
|
}
|
|
|
|
delay(50);
|
|
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
|
|
//0: default, 1:not use, 2:LSB, 3:USB, 4:CW, 5:AM, 6:FM
|
|
byte modeToByte(){
|
|
if (isUSB)
|
|
return 3;
|
|
else
|
|
return 2;
|
|
}
|
|
|
|
void byteToMode(byte modeValue){
|
|
if (modeValue == 3)
|
|
isUSB = 1;
|
|
else
|
|
isUSB = 0;
|
|
}
|
|
void byteWithFreqToMode(byte modeValue){
|
|
if (modeValue == 3)
|
|
isUSB = 1;
|
|
else if (modeValue == 0) //Not Set
|
|
isUSB = (frequency > 10000000l) ? true : false;
|
|
else
|
|
isUSB = 0;
|
|
}
|
|
|
|
void menuVfoToggle(int btn, char isUseDelayTime)
|
|
{
|
|
if (!btn){
|
|
if (vfoActive == VFO_A)
|
|
printLineF2(F("Select VFO B?"));
|
|
else
|
|
printLineF2(F("Select VFO A?"));
|
|
}
|
|
else {
|
|
if (vfoActive == VFO_B){
|
|
vfoB = frequency;
|
|
vfoB_mode = modeToByte();
|
|
storeFrequencyAndMode(2); //vfoB -> eeprom
|
|
|
|
vfoActive = VFO_A;
|
|
frequency = vfoA;
|
|
saveCheckFreq = frequency;
|
|
byteToMode(vfoA_mode);
|
|
printLineF2(F("Selected VFO A"));
|
|
}
|
|
else {
|
|
vfoA = frequency;
|
|
vfoA_mode = modeToByte();
|
|
storeFrequencyAndMode(1); //vfoA -> eeprom
|
|
|
|
vfoActive = VFO_B;
|
|
frequency = vfoB;
|
|
saveCheckFreq = frequency;
|
|
byteToMode(vfoB_mode);
|
|
printLineF2(F("Selected VFO B"));
|
|
}
|
|
|
|
ritDisable();
|
|
|
|
if (isUseDelayTime == 1) //Found Issue in wsjt-x Linux 32bit
|
|
delay_background(500, 0);
|
|
|
|
printLine2ClearAndUpdate();
|
|
//exit the menu
|
|
menuOn = 0;
|
|
}
|
|
}
|
|
|
|
void menuRitToggle(int btn){
|
|
if (!btn){
|
|
if (ritOn == 1)
|
|
printLineF2(F("RIT:On, Off?"));
|
|
else
|
|
printLineF2(F("RIT:Off, On?"));
|
|
}
|
|
else {
|
|
if (ritOn == 0){
|
|
printLineF2(F("RIT is ON"));
|
|
//enable RIT so the current frequency is used at transmit
|
|
ritEnable(frequency);
|
|
}
|
|
else{
|
|
printLineF2(F("RIT is OFF"));
|
|
ritDisable();
|
|
}
|
|
menuOn = 0;
|
|
delay_background(500, 0);
|
|
printLine2ClearAndUpdate();
|
|
}
|
|
}
|
|
|
|
void menuSidebandToggle(int btn){
|
|
if (!btn){
|
|
if (isUSB == true)
|
|
printLineF2(F("Select LSB?"));
|
|
else
|
|
printLineF2(F("Select USB?"));
|
|
}
|
|
else {
|
|
if (isUSB == true){
|
|
isUSB = false;
|
|
printLineF2(F("LSB Selected"));
|
|
}
|
|
else {
|
|
isUSB = true;
|
|
printLineF2(F("USB Selected"));
|
|
}
|
|
setFrequency(frequency);
|
|
delay_background(500, 0);
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
}
|
|
|
|
void menuSetupKeyType(int btn){
|
|
if (!btn && digitalRead(PTT) == HIGH){
|
|
if (Iambic_Key)
|
|
printLineF2(F("Key: Straight?"));
|
|
else
|
|
printLineF2(F("Key: Fn=A, PTT=B"));
|
|
}
|
|
else {
|
|
if (Iambic_Key)
|
|
{
|
|
printLineF2(F("Straight Key!"));
|
|
Iambic_Key = false;
|
|
}
|
|
else
|
|
{
|
|
Iambic_Key = true;
|
|
if (btn)
|
|
{
|
|
keyerControl &= ~IAMBICB;
|
|
printLineF2(F("IAMBICA Key!"));
|
|
}
|
|
else
|
|
{
|
|
keyerControl |= IAMBICB;
|
|
printLineF2(F("IAMBICB Key!"));
|
|
}
|
|
}
|
|
|
|
delay_background(500, 0);
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
}
|
|
|
|
|
|
void menuTxOnOff(int btn, byte optionType){
|
|
if (!btn){
|
|
if ((isTxType & optionType) == 0)
|
|
printLineF2(F("TX OFF?"));
|
|
else
|
|
printLineF2(F("TX ON?"));
|
|
}
|
|
else {
|
|
if ((isTxType & optionType) == 0){
|
|
isTxType |= optionType;
|
|
printLineF2(F("TX OFF!"));
|
|
}
|
|
else {
|
|
isTxType &= ~(optionType);
|
|
printLineF2(F("TX ON!"));
|
|
}
|
|
delay_background(500, 0);
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
}
|
|
|
|
/**
|
|
* The calibration routines are not normally shown in the menu as they are rarely used
|
|
* They can be enabled by choosing this menu option
|
|
*/
|
|
void menuSetup(int btn){
|
|
if (!btn){
|
|
if (!modeCalibrate)
|
|
printLineF2(F("Setup On?"));
|
|
else
|
|
printLineF2(F("Setup Off?"));
|
|
}else {
|
|
if (!modeCalibrate){
|
|
modeCalibrate = true;
|
|
printLineF2(F("Setup:On"));
|
|
}
|
|
else {
|
|
modeCalibrate = false;
|
|
printLineF2(F("Setup:Off"));
|
|
}
|
|
delay_background(2000, 0);
|
|
printLine2Clear();
|
|
menuOn = 0;
|
|
}
|
|
}
|
|
|
|
void menuExit(int btn){
|
|
|
|
if (!btn){
|
|
printLineF2(F("Exit Menu?"));
|
|
}
|
|
else{
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
}
|
|
|
|
void menuCWSpeed(int btn){
|
|
int knob = 0;
|
|
int wpm;
|
|
|
|
wpm = 1200/cwSpeed;
|
|
|
|
if (!btn){
|
|
strcpy(b, "CW:");
|
|
itoa(wpm,c, 10);
|
|
strcat(b, c);
|
|
strcat(b, "WPM Change?");
|
|
printLine2(b);
|
|
return;
|
|
}
|
|
|
|
printLineF1(F("Press PTT to set"));
|
|
strcpy(b, "WPM:");
|
|
itoa(wpm,c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
delay_background(300, 0);
|
|
|
|
while(!btnDown() && digitalRead(PTT) == HIGH){
|
|
|
|
knob = enc_read();
|
|
if (knob != 0){
|
|
if (wpm > 3 && knob < 0)
|
|
wpm--;
|
|
if (wpm < 50 && knob > 0)
|
|
wpm++;
|
|
|
|
strcpy(b, "WPM:");
|
|
itoa(wpm,c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
}
|
|
//abort if this button is down
|
|
if (btnDown())
|
|
//re-enable the clock1 and clock 2
|
|
break;
|
|
|
|
Check_Cat(0); //To prevent disconnections
|
|
}
|
|
|
|
//save the setting
|
|
if (digitalRead(PTT) == LOW){
|
|
printLineF2(F("CW Speed set!"));
|
|
cwSpeed = 1200/wpm;
|
|
EEPROM.put(CW_SPEED, cwSpeed);
|
|
delay_background(2000, 0);
|
|
}
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
|
|
void menuCWAutoKey(int btn){
|
|
if (!btn){
|
|
printLineF2(F("CW AutoKey Mode?"));
|
|
return;
|
|
}
|
|
|
|
//Check CW_AUTO_MAGIC_KEY and CW Text Count
|
|
EEPROM.get(CW_AUTO_COUNT, cwAutoTextCount);
|
|
if (EEPROM.read(CW_AUTO_MAGIC_KEY) != 0x73 || cwAutoTextCount < 1)
|
|
{
|
|
printLineF2(F("Empty CW data"));
|
|
delay_background(2000, 0);
|
|
return;
|
|
}
|
|
|
|
printLineF1(F("Press PTT to Send"));
|
|
delay_background(500, 0);
|
|
updateDisplay();
|
|
beforeCWTextIndex = 255; //255 value is for start check
|
|
isCWAutoMode = 1;
|
|
menuOn = 0;
|
|
}
|
|
|
|
void menuSetupCwDelay(int btn){
|
|
int knob = 0;
|
|
int tmpCWDelay = cwDelayTime * 10;
|
|
|
|
if (!btn){
|
|
strcpy(b, "CW TX->RX Delay");
|
|
printLine2(b);
|
|
return;
|
|
}
|
|
|
|
printLineF1(F("Press PTT to set"));
|
|
strcpy(b, "DELAY:");
|
|
itoa(tmpCWDelay,c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
delay_background(300, 0);
|
|
|
|
while(!btnDown() && digitalRead(PTT) == HIGH){
|
|
knob = enc_read();
|
|
if (knob != 0){
|
|
if (tmpCWDelay > 3 && knob < 0)
|
|
tmpCWDelay -= 10;
|
|
if (tmpCWDelay < 2500 && knob > 0)
|
|
tmpCWDelay += 10;
|
|
|
|
strcpy(b, "DELAY:");
|
|
itoa(tmpCWDelay,c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
}
|
|
//abort if this button is down
|
|
if (btnDown())
|
|
break;
|
|
|
|
Check_Cat(0); //To prevent disconnections
|
|
}
|
|
|
|
//save the setting
|
|
if (digitalRead(PTT) == LOW){
|
|
printLineF2(F("CW Delay set!"));
|
|
cwDelayTime = tmpCWDelay / 10;
|
|
EEPROM.put(CW_DELAY, cwDelayTime);
|
|
delay_background(2000, 0);
|
|
}
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
|
|
void menuSetupTXCWInterval(int btn){
|
|
int knob = 0;
|
|
int tmpTXCWInterval = delayBeforeCWStartTime * 2;
|
|
|
|
if (!btn){
|
|
strcpy(b, "CW Start Delay");
|
|
printLine2(b);
|
|
return;
|
|
}
|
|
|
|
printLineF1(F("Press PTT to set"));
|
|
strcpy(b, "Start Delay:");
|
|
itoa(tmpTXCWInterval,c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
delay_background(300, 0);
|
|
|
|
while(!btnDown() && digitalRead(PTT) == HIGH){
|
|
knob = enc_read();
|
|
if (knob != 0){
|
|
if (tmpTXCWInterval > 0 && knob < 0)
|
|
tmpTXCWInterval -= 2;
|
|
if (tmpTXCWInterval < 500 && knob > 0)
|
|
tmpTXCWInterval += 2;
|
|
|
|
strcpy(b, "Start Delay:");
|
|
itoa(tmpTXCWInterval,c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
}
|
|
//abort if this button is down
|
|
if (btnDown())
|
|
break;
|
|
|
|
Check_Cat(0); //To prevent disconnections
|
|
}
|
|
|
|
//save the setting
|
|
if (digitalRead(PTT) == LOW){
|
|
printLineF2(F("CW Start set!"));
|
|
delayBeforeCWStartTime = tmpTXCWInterval / 2;
|
|
EEPROM.put(CW_START, delayBeforeCWStartTime);
|
|
delay_background(2000, 0);
|
|
}
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
|
|
|
|
/**
|
|
* Take a deep breath, math(ematics) ahead
|
|
* The 25 mhz oscillator is multiplied by 35 to run the vco at 875 mhz
|
|
* This is divided by a number to generate different frequencies.
|
|
* If we divide it by 875, we will get 1 mhz signal
|
|
* So, if the vco is shifted up by 875 hz, the generated frequency of 1 mhz is shifted by 1 hz (875/875)
|
|
* At 12 Mhz, the carrier will needed to be shifted down by 12 hz for every 875 hz of shift up of the vco
|
|
*
|
|
*/
|
|
|
|
//this is used by the si5351 routines in the ubitx_5351 file
|
|
extern int32_t calibration;
|
|
extern uint32_t si5351bx_vcoa;
|
|
|
|
void factoryCalibration(int btn){
|
|
int knob = 0;
|
|
|
|
//keep clear of any previous button press
|
|
while (btnDown())
|
|
delay(100);
|
|
delay(100);
|
|
|
|
if (!btn){
|
|
printLineF2(F("Set Calibration?"));
|
|
return;
|
|
}
|
|
|
|
calibration = 0;
|
|
|
|
isUSB = true;
|
|
|
|
//turn off the second local oscillator and the bfo
|
|
si5351_set_calibration(calibration);
|
|
startTx(TX_CW, 1);
|
|
si5351bx_setfreq(2, 10000000l);
|
|
|
|
strcpy(b, "#1 10 MHz cal:");
|
|
ltoa(calibration/8750, c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
|
|
while (!btnDown())
|
|
{
|
|
|
|
if (digitalRead(PTT) == LOW && !keyDown)
|
|
cwKeydown();
|
|
if (digitalRead(PTT) == HIGH && keyDown)
|
|
cwKeyUp();
|
|
|
|
knob = enc_read();
|
|
|
|
if (knob > 0)
|
|
calibration += 875;
|
|
else if (knob < 0)
|
|
calibration -= 875;
|
|
else
|
|
continue; //don't update the frequency or the display
|
|
|
|
si5351_set_calibration(calibration);
|
|
si5351bx_setfreq(2, 10000000l);
|
|
strcpy(b, "#1 10 MHz cal:");
|
|
ltoa(calibration/8750, c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
}
|
|
|
|
cwTimeout = 0;
|
|
keyDown = 0;
|
|
stopTx();
|
|
|
|
printLineF2(F("Calibration set!"));
|
|
EEPROM.put(MASTER_CAL, calibration);
|
|
initOscillators();
|
|
setFrequency(frequency);
|
|
updateDisplay();
|
|
|
|
while(btnDown())
|
|
delay(50);
|
|
delay(100);
|
|
}
|
|
|
|
void menuSetupCalibration(int btn){
|
|
int knob = 0;
|
|
int32_t prev_calibration;
|
|
|
|
if (!btn){
|
|
printLineF2(F("Set Calibration?"));
|
|
return;
|
|
}
|
|
|
|
printLineF1(F("Set to Zero-beat,"));
|
|
printLineF2(F("press PTT to save"));
|
|
delay_background(1000, 0);
|
|
|
|
prev_calibration = calibration;
|
|
calibration = 0;
|
|
si5351_set_calibration(calibration);
|
|
setFrequency(frequency);
|
|
|
|
strcpy(b, "cal:");
|
|
ltoa(calibration/8750, c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
|
|
while (digitalRead(PTT) == HIGH && !btnDown())
|
|
{
|
|
knob = enc_read();
|
|
|
|
if (knob > 0){
|
|
calibration += 8750;
|
|
usbCarrier += 120;
|
|
}
|
|
else if (knob < 0){
|
|
calibration -= 8750;
|
|
usbCarrier -= 120;
|
|
}
|
|
else
|
|
continue; //don't update the frequency or the display
|
|
|
|
si5351_set_calibration(calibration);
|
|
si5351bx_setfreq(0, usbCarrier);
|
|
setFrequency(frequency);
|
|
|
|
strcpy(b, "cal:");
|
|
ltoa(calibration/8750, c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
}
|
|
|
|
//save the setting
|
|
if (digitalRead(PTT) == LOW){
|
|
printLineF1(F("Calibration set!"));
|
|
printLineF2(F("Set Carrier now"));
|
|
EEPROM.put(MASTER_CAL, calibration);
|
|
delay_background(2000, 0);
|
|
}
|
|
else
|
|
calibration = prev_calibration;
|
|
|
|
initOscillators();
|
|
//si5351_set_calibration(calibration);
|
|
setFrequency(frequency);
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
|
|
|
|
void printCarrierFreq(unsigned long freq){
|
|
|
|
memset(c, 0, sizeof(c));
|
|
memset(b, 0, sizeof(b));
|
|
|
|
ultoa(freq, b, DEC);
|
|
|
|
strncat(c, b, 2);
|
|
strcat(c, ".");
|
|
strncat(c, &b[2], 3);
|
|
strcat(c, ".");
|
|
strncat(c, &b[5], 1);
|
|
printLine2(c);
|
|
}
|
|
|
|
void menuSetupCarrier(int btn){
|
|
int knob = 0;
|
|
unsigned long prevCarrier;
|
|
|
|
if (!btn){
|
|
printLineF2(F("Set the BFO"));
|
|
return;
|
|
}
|
|
|
|
prevCarrier = usbCarrier;
|
|
printLineF1(F("Tune to best Signal"));
|
|
printLineF1(F("PTT to confirm. "));
|
|
delay_background(1000, 0);
|
|
|
|
//usbCarrier = 11995000l; //Remarked by KD8CEC, Suggest from many user, if entry routine factoryrest
|
|
|
|
si5351bx_setfreq(0, usbCarrier);
|
|
printCarrierFreq(usbCarrier);
|
|
|
|
//disable all clock 1 and clock 2
|
|
while (digitalRead(PTT) == HIGH && !btnDown())
|
|
{
|
|
knob = enc_read();
|
|
|
|
if (knob > 0)
|
|
usbCarrier -= 50;
|
|
else if (knob < 0)
|
|
usbCarrier += 50;
|
|
else
|
|
continue; //don't update the frequency or the display
|
|
|
|
si5351bx_setfreq(0, usbCarrier);
|
|
printCarrierFreq(usbCarrier);
|
|
|
|
Check_Cat(0); //To prevent disconnections
|
|
delay(100);
|
|
}
|
|
|
|
//save the setting
|
|
if (digitalRead(PTT) == LOW){
|
|
printLineF2(F("Carrier set!"));
|
|
EEPROM.put(USB_CAL, usbCarrier);
|
|
delay_background(1000, 0);
|
|
}
|
|
else
|
|
usbCarrier = prevCarrier;
|
|
|
|
si5351bx_setfreq(0, usbCarrier);
|
|
setFrequency(frequency);
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
|
|
void menuSetupCwTone(int btn){
|
|
int knob = 0;
|
|
int prev_sideTone;
|
|
|
|
if (!btn){
|
|
printLineF2(F("Change CW Tone"));
|
|
return;
|
|
}
|
|
|
|
prev_sideTone = sideTone;
|
|
printLineF1(F("Tune CW tone"));
|
|
printLineF2(F("PTT to confirm."));
|
|
delay_background(1000, 0);
|
|
tone(CW_TONE, sideTone);
|
|
|
|
//disable all clock 1 and clock 2
|
|
while (digitalRead(PTT) == HIGH && !btnDown())
|
|
{
|
|
knob = enc_read();
|
|
|
|
if (knob > 0 && sideTone < 2000)
|
|
sideTone += 10;
|
|
else if (knob < 0 && sideTone > 100 )
|
|
sideTone -= 10;
|
|
else
|
|
continue; //don't update the frequency or the display
|
|
|
|
tone(CW_TONE, sideTone);
|
|
itoa(sideTone, b, 10);
|
|
printLine2(b);
|
|
|
|
delay(100);
|
|
Check_Cat(0); //To prevent disconnections
|
|
}
|
|
noTone(CW_TONE);
|
|
//save the setting
|
|
if (digitalRead(PTT) == LOW){
|
|
printLineF2(F("Sidetone set!"));
|
|
EEPROM.put(CW_SIDETONE, usbCarrier);
|
|
delay_background(2000, 0);
|
|
}
|
|
else
|
|
sideTone = prev_sideTone;
|
|
|
|
printLine2ClearAndUpdate();
|
|
menuOn = 0;
|
|
}
|
|
|
|
void setDialLock(byte tmpLock, byte fromMode) {
|
|
if (tmpLock == 1)
|
|
isDialLock |= (vfoActive == VFO_A ? 0x01 : 0x02);
|
|
else
|
|
isDialLock &= ~(vfoActive == VFO_A ? 0x01 : 0x02);
|
|
|
|
if (fromMode == 2 || fromMode == 3) return;
|
|
|
|
if (tmpLock == 1)
|
|
printLineF2(F("Dial Lock ON"));
|
|
else
|
|
printLineF2(F("Dial Lock OFF"));
|
|
|
|
delay_background(1000, 0);
|
|
printLine2ClearAndUpdate();
|
|
}
|
|
|
|
unsigned int btnDownTimeCount;
|
|
|
|
#define PRESS_ADJUST_TUNE 1000
|
|
#define PRESS_LOCK_CONTROL 2000
|
|
|
|
void doMenu(){
|
|
int select=0, i,btnState;
|
|
char isNeedDisplay = 0;
|
|
|
|
//for DialLock On/Off function
|
|
btnDownTimeCount = 0;
|
|
|
|
//wait for the button to be raised up
|
|
|
|
//Appened Lines by KD8CEC for Adjust Tune step and Set Dial lock
|
|
while(btnDown()){
|
|
delay(50);
|
|
Check_Cat(0); //To prevent disconnections
|
|
|
|
if (btnDownTimeCount++ == (PRESS_ADJUST_TUNE / 50)) { //Set Tune Step
|
|
printLineF2(F("Set Tune Step?"));
|
|
}
|
|
else if (btnDownTimeCount > (PRESS_LOCK_CONTROL / 50)) { //check long time Down Button -> 2.5 Second => Lock
|
|
if (vfoActive == VFO_A)
|
|
setDialLock((isDialLock & 0x01) == 0x01 ? 0 : 1, 0); //Reverse Dial lock
|
|
else
|
|
setDialLock((isDialLock & 0x02) == 0x02 ? 0 : 1, 0); //Reverse Dial lock
|
|
return;
|
|
}
|
|
}
|
|
delay(50); //debounce
|
|
|
|
//ADJUST TUNE STEP
|
|
if (btnDownTimeCount > (PRESS_ADJUST_TUNE / 50))
|
|
{
|
|
printLineF1(F("Press Key to set"));
|
|
isNeedDisplay = 1; //check to need display for display current value
|
|
|
|
while (digitalRead(PTT) == HIGH && !btnDown())
|
|
{
|
|
Check_Cat(0); //To prevent disconnections
|
|
delay(50); //debounce
|
|
|
|
if (isNeedDisplay) {
|
|
strcpy(b, "Tune Step:");
|
|
itoa(arTuneStep[tuneStepIndex -1], c, 10);
|
|
strcat(b, c);
|
|
printLine2(b);
|
|
isNeedDisplay = 0;
|
|
}
|
|
|
|
i = enc_read();
|
|
|
|
if (i != 0) {
|
|
select += (i > 0 ? 1 : -1);
|
|
|
|
if (select * select >= 25) { //Threshold 5 * 5 = 25
|
|
if (select < 0) {
|
|
if (tuneStepIndex > 1)
|
|
tuneStepIndex--;
|
|
}
|
|
else {
|
|
if (tuneStepIndex < 5)
|
|
tuneStepIndex++;
|
|
}
|
|
select = 0;
|
|
isNeedDisplay = 1;
|
|
}
|
|
}
|
|
} //end of while
|
|
|
|
printLineF2(F("Changed Step!"));
|
|
//SAVE EEPROM
|
|
EEPROM.put(TUNING_STEP, tuneStepIndex);
|
|
delay_background(500, 0);
|
|
printLine2ClearAndUpdate();
|
|
return;
|
|
} //set tune step
|
|
|
|
//Below codes are origial code with modified by KD8CEC
|
|
//Select menu
|
|
menuOn = 2;
|
|
|
|
while (menuOn){
|
|
i = enc_read();
|
|
btnState = btnDown();
|
|
|
|
if (i > 0){
|
|
if (modeCalibrate && select + i < 160)
|
|
select += i;
|
|
if (!modeCalibrate && select + i < 80)
|
|
select += i;
|
|
}
|
|
//if (i < 0 && select - i >= 0)
|
|
if (i < 0 && select - i >= -10)
|
|
select += i; //caught ya, i is already -ve here, so you add it
|
|
|
|
if (select < -5)
|
|
menuExit(btnState);
|
|
else if (select < 10)
|
|
menuBand(btnState);
|
|
else if (select < 20)
|
|
menuRitToggle(btnState);
|
|
else if (select < 30)
|
|
menuVfoToggle(btnState, 1);
|
|
else if (select < 40)
|
|
menuSidebandToggle(btnState);
|
|
else if (select < 50)
|
|
menuCWSpeed(btnState);
|
|
else if (select < 60)
|
|
menuCWAutoKey(btnState);
|
|
else if (select < 70)
|
|
menuSetup(btnState);
|
|
else if (select < 80 && !modeCalibrate)
|
|
menuExit(btnState);
|
|
else if (select < 90 && modeCalibrate)
|
|
menuSetupCalibration(btnState); //crystal
|
|
else if (select < 100 && modeCalibrate)
|
|
menuSetupCarrier(btnState); //lsb
|
|
else if (select < 110 && modeCalibrate)
|
|
menuSetupCwTone(btnState);
|
|
else if (select < 120 && modeCalibrate)
|
|
menuSetupCwDelay(btnState);
|
|
else if (select < 130 && modeCalibrate)
|
|
menuSetupTXCWInterval(btnState);
|
|
else if (select < 140 && modeCalibrate)
|
|
menuSetupKeyType(btnState);
|
|
else if (select < 150 && modeCalibrate)
|
|
menuTxOnOff(btnState, 0x01); //TX OFF / ON
|
|
else if (select < 160 && modeCalibrate)
|
|
menuExit(btnState);
|
|
|
|
Check_Cat(0); //To prevent disconnections
|
|
}
|
|
|
|
//debounce the button
|
|
while(btnDown()){
|
|
delay(50);
|
|
Check_Cat(0); //To prevent disconnections
|
|
}
|
|
delay(50);
|
|
}
|
|
|