scrape/ubitx-v5d-xcvr
1
0
Fork 0
Code Issues Pull Requests Releases Wiki Activity
c602fdde7c
ubitx-v5d-xcvr/ubitx_20/cat_libs.ino

871 lines
24 KiB
Arduino
Raw Normal View History

beta 0.25 commit
2018-01-09 21:34:15 -05:00
/*************************************************************************
Add Comment
2018-01-26 04:23:52 -05:00
KD8CEC's CAT Library for uBITX and HAM
beta 0.25 commit
2018-01-09 21:34:15 -05:00
This source code is written for uBITX, but it can also be used on other radios.
The CAT protocol is used by many radios to provide remote control to comptuers through
the serial port.
it is based on FT-817, uBITX's only protocol has been added and will be added in the future.
In addition, simple things such as FT-857 frequency control and PTT control can also be
transmitted to the FT-857 protocol.
This code refers to the following code.
- FT857D CAT Library, by Pavel Milanes, CO7WT, pavelmc@gmail.com
https://github.com/pavelmc/FT857d/
- Ham Radio Control Libraries, https://sourceforge.net/projects/hamlib/
- Not found protocols decription were analyzed using an RS-232 analyzer.
using FT-817 and
- http://www.ka7oei.com/ft817_meow.html <-- It was a great help here.
-----------------------------------------------------------------------------
This program is free software: you can redistribute it and/or modify
it under the terms of the GNU General Public License as published by
the Free Software Foundation, either version 3 of the License, or
(at your option) any later version.
This program is distributed in the hope that it will be useful,
but WITHOUT ANY WARRANTY; without even the implied warranty of
MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
GNU General Public License for more details.
You should have received a copy of the GNU General Public License
along with this program. If not, see <http://www.gnu.org/licenses/>.
**************************************************************************/
Modfied SMeter and CAT
2018-05-03 03:20:09 -04:00
#include "ubitx.h"
beta 0.25 commit
2018-01-09 21:34:15 -05:00
//for broken protocol
#define CAT_RECEIVE_TIMEOUT 500
#define CAT_MODE_LSB 0x00
#define CAT_MODE_USB 0x01
#define CAT_MODE_CW 0x02
#define CAT_MODE_CWR 0x03
#define CAT_MODE_AM 0x04
#define CAT_MODE_FM 0x08
#define CAT_MODE_DIG 0x0A
#define CAT_MODE_PKT 0x0C
#define CAT_MODE_FMN 0x88
#define ACK 0
unsigned int skipTimeCount = 0;
byte CAT_BUFF[5];
byte CAT_SNDBUFF[5];
void SendCatData(byte sendCount)
{
for (byte i = 0; i < sendCount; i++)
Serial.write(CAT_BUFF[i]);
//Serial.flush();
}
//PROTOCOL : 0x01
//Computer ->(frequency)-> TRCV CAT_BUFF
void CatSetFreq(byte fromType)
{
//CAT_BUFF
byte i;
unsigned long tempFreq = 0;
if (fromType == 2 || fromType == 3) {
Serial.write(ACK);
return;
}
//2 digit in 1 byte (4 bit + 4bit) * 4.5 byte
for (i = 0; i < 4; i++)
{
tempFreq *= 10;
tempFreq += CAT_BUFF[i] >> 4;
tempFreq *= 10;
tempFreq += CAT_BUFF[i] & 0x0f;
}
tempFreq *= 10;
tempFreq += CAT_BUFF[4] >> 4;
if (!inTx && (frequency != tempFreq))
{
//Check Frequency Range
if (tempFreq >= LOWEST_FREQ_DIAL && tempFreq <= HIGHEST_FREQ_DIAL)
{
setFrequency(tempFreq);
updateDisplay();
}
else
{
//KD8CEC
//Remark for rduce program size, if you need, you can remove remark,
//however alomost rig control software available 1.0 ~ 50Mhz
//printLine(0, "OUT OF RANGE!!!");
//delay_background(300, 0);
}
}
Serial.write(ACK);
}
//#define BCD_LEN 9
//PROTOCOL : 0x03
//Computer <-(frequency)-> TRCV CAT_BUFF
version0.35
2018-02-06 02:13:05 -05:00
//void CatGetFreqMode(unsigned long freq, byte fromType)
void CatGetFreqMode(unsigned long freq) //for remove warning messages
beta 0.25 commit
2018-01-09 21:34:15 -05:00
{
int i;
byte tmpValue;
unsigned BCD_LEN = 9;
if (BCD_LEN & 1) {
CAT_BUFF[BCD_LEN / 2] &= 0x0f;
CAT_BUFF[BCD_LEN / 2] |= (freq % 10) << 4;
freq /= 10;
}
for (i = (BCD_LEN / 2) - 1; i >= 0; i--) {
tmpValue = freq % 10;
freq /= 10;
tmpValue |= (freq % 10) << 4;
freq /= 10;
CAT_BUFF[i] = tmpValue;
}
//Mode Check
Added CWL, CWU Mode, need test
2018-01-29 23:20:52 -05:00
if (cwMode == 0)
{
if (isUSB)
CAT_BUFF[4] = CAT_MODE_USB;
else
CAT_BUFF[4] = CAT_MODE_LSB;
}
else if (cwMode == 1)
{
CAT_BUFF[4] = CAT_MODE_CW;
}
beta 0.25 commit
2018-01-09 21:34:15 -05:00
else
Added CWL, CWU Mode, need test
2018-01-29 23:20:52 -05:00
{
CAT_BUFF[4] = CAT_MODE_CW;
}
beta 0.25 commit
2018-01-09 21:34:15 -05:00
SendCatData(5);
}
version0.35
2018-02-06 02:13:05 -05:00
//void CatSetSplit(boolean isSplit, byte fromType)
void CatSetSplit(boolean isSplit) //for remove warning messages
beta 0.25 commit
2018-01-09 21:34:15 -05:00
{
version0.35
2018-02-06 02:13:05 -05:00
if (isSplit)
splitOn = 1;
else
splitOn = 0;
beta 0.25 commit
2018-01-09 21:34:15 -05:00
Serial.write(ACK);
}
void CatSetPTT(boolean isPTTOn, byte fromType)
{
fixed cat with cw key (IA, IB)
2018-02-08 11:11:48 -05:00
//
if ((!inTx) && (fromType == 2 || fromType == 3)) {
beta 0.25 commit
2018-01-09 21:34:15 -05:00
Serial.write(ACK);
return;
}
// Set PTT Mode
if (isPTTOn)
{
if (!inTx)
{
txCAT = true;
startTx(TX_SSB, 1);
//Exit menu, Memory Keyer... ETC
if (isCWAutoMode > 0) {
isCWAutoMode = 0;
printLineF2(F("AutoKey Exit/CAT"));
//delay_background(1000, 0);
}
}
}
else
{
if (inTx)
{
stopTx();
txCAT = false;
}
}
Serial.write(ACK);
}
void CatVFOToggle(boolean isSendACK, byte fromType)
{
if (fromType != 2 && fromType != 3) {
version0.35
2018-02-06 02:13:05 -05:00
menuVfoToggle(1);
beta 0.25 commit
2018-01-09 21:34:15 -05:00
}
if (isSendACK)
Serial.write(ACK); //Time
}
void CatSetMode(byte tmpMode, byte fromType)
{
if (fromType == 2 || fromType == 3) {
Serial.write(ACK);
return;
}
if (!inTx)
{
Added CWL, CWU Mode, need test
2018-01-29 23:20:52 -05:00
if (tmpMode == CAT_MODE_CW)
beta 0.25 commit
2018-01-09 21:34:15 -05:00
{
Added CWL, CWU Mode, need test
2018-01-29 23:20:52 -05:00
cwMode = 1;
}
else if (tmpMode == CAT_MODE_USB)
{
cwMode = 0;
beta 0.25 commit
2018-01-09 21:34:15 -05:00
isUSB = true;
}
else
{
Added CWL, CWU Mode, need test
2018-01-29 23:20:52 -05:00
cwMode = 0;
beta 0.25 commit
2018-01-09 21:34:15 -05:00
isUSB = false;
}
setFrequency(frequency);
updateDisplay();
}
Serial.write(ACK);
}
//Read EEProm by uBITX Manager Software
version0.35
2018-02-06 02:13:05 -05:00
//void ReadEEPRom(byte fromType)
void ReadEEPRom() //for remove warnings.
beta 0.25 commit
2018-01-09 21:34:15 -05:00
{
//5BYTES
//CAT_BUFF[0] [1] [2] [3] [4] //4 COMMAND
//0, 1 START ADDRESS
uint16_t eepromStartIndex = CAT_BUFF[0] + CAT_BUFF[1] * 256;
uint16_t eepromReadLength = CAT_BUFF[2] + CAT_BUFF[3] * 256;;
byte checkSum = 0;
byte read1Byte = 0;
Serial.write(0x02); //STX
checkSum = 0x02;
for (uint16_t i = 0; i < eepromReadLength; i++)
{
read1Byte = EEPROM.read(eepromStartIndex + i);
checkSum += read1Byte;
Serial.write(read1Byte);
}
Serial.write(checkSum);
Serial.write(ACK);
}
//Write just proecess 1byes
version0.35
2018-02-06 02:13:05 -05:00
//void WriteEEPRom(byte fromType)
void WriteEEPRom(void) //for remove warning
beta 0.25 commit
2018-01-09 21:34:15 -05:00
{
//5BYTES
uint16_t eepromStartIndex = CAT_BUFF[0] + CAT_BUFF[1] * 256;
byte write1Byte = CAT_BUFF[2];
//Check Checksum
if (CAT_BUFF[3] != ((CAT_BUFF[0] + CAT_BUFF[1] + CAT_BUFF[2]) % 256))
{
Serial.write(0x56); //CHECK SUM ERROR
Serial.write(ACK);
}
else
{
Extended key (select key type)
2018-04-24 04:26:34 -04:00
//Special Command
if (eepromStartIndex == 13131) //Magic Key
{
if (write1Byte == 0x51) //Restart
{
asm volatile (" jmp 0");
}
}
else
{
EEPROM.write(eepromStartIndex, write1Byte);
}
beta 0.25 commit
2018-01-09 21:34:15 -05:00
Serial.write(0x77); //OK
Serial.write(ACK);
}
}
version0.35
2018-02-06 02:13:05 -05:00
//void ReadEEPRom_FT817(byte fromType)
void ReadEEPRom_FT817(void) //for remove warnings
beta 0.25 commit
2018-01-09 21:34:15 -05:00
{
byte temp0 = CAT_BUFF[0];
byte temp1 = CAT_BUFF[1];
CAT_BUFF[0] = 0;
CAT_BUFF[1] = 0;
switch (temp1)
{
case 0x45 : //
if (temp0 == 0x03)
{
CAT_BUFF[0] = 0x00;
CAT_BUFF[1] = 0xD0;
}
break;
case 0x47 : //
if (temp0 == 0x03)
{
CAT_BUFF[0] = 0xDC;
CAT_BUFF[1] = 0xE0;
}
break;
case 0x55 :
//0 : VFO A/B 0 = VFO-A, 1 = VFO-B
//1 : MTQMB Select 0 = (Not MTQMB), 1 = MTQMB ("Memory Tune Quick Memory Bank")
//2 : QMB Select 0 = (Not QMB), 1 = QMB ("Quick Memory Bank")
//3 :
//4 : Home Select 0 = (Not HOME), 1 = HOME memory
//5 : Memory/MTUNE select 0 = Memory, 1 = MTUNE
//6 :
//7 : MEM/VFO Select 0 = Memory, 1 = VFO (A or B - see bit 0)
CAT_BUFF[0] = 0x80 + (vfoActive == VFO_B ? 1 : 0);
CAT_BUFF[1] = 0x00;
break;
case 0x57 : //
//0 : 1-0 AGC Mode 00 = Auto, 01 = Fast, 10 = Slow, 11 = Off
//2 DSP On/Off 0 = Off, 1 = On (Display format)
//4 PBT On/Off 0 = Off, 1 = On (Passband Tuning)
//5 NB On/Off 0 = Off, 1 = On (Noise Blanker)
//6 Lock On/Off 0 = Off, 1 = On (Dial Lock)
//7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning)
CAT_BUFF[0] = 0xC0;
CAT_BUFF[1] = 0x40;
break;
case 0x59 : // band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom)
//http://www.ka7oei.com/ft817_memmap.html
//CAT_BUFF[0] = 0xC2;
//CAT_BUFF[1] = 0x82;
break;
case 0x5C : //Beep Volume (0-100) (#13)
CAT_BUFF[0] = 0xB2;
CAT_BUFF[1] = 0x42;
break;
case 0x5E :
//3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz
//5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel
//7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW
//CAT_BUFF[0] = 0x08;
CAT_BUFF[0] = sideTonePitch;
CAT_BUFF[1] = 0x25;
break;
case 0x61 : //Sidetone (Volume) (#44)
CAT_BUFF[0] = sideToneSub;
CAT_BUFF[1] = 0x08;
break;
case 0x5F : //
//4-0 CW Weight (1.:2.5-1:4.5) (#22) From 0 to 14 (HEX) with 0 = 1:2.5, incrementing in 0.1 weight steps
//5 420 ARS (#2) 0 = Off, 1 = On
//6 144 ARS (#1) 0 = Off, 1 = On
//7 Sql/RF-G (#45) 0 = Off, 1 = On
CAT_BUFF[0] = 0x32;
CAT_BUFF[1] = 0x08;
break;
case 0x60 : //CW Delay (10-2500 ms) (#17) From 1 to 250 (decimal) with each step representing 10 ms
CAT_BUFF[0] = cwDelayTime;
CAT_BUFF[1] = 0x32;
break;
case 0x62 : //
//5-0 CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
//7-6 Batt-Chg (6/8/10 Hours (#11) 00 = 6 Hours, 01 = 8 Hours, 10 = 10 Hours
//CAT_BUFF[0] = 0x08;
CAT_BUFF[0] = 1200 / cwSpeed - 4;
CAT_BUFF[1] = 0xB2;
break;
case 0x63 : //
//6-0 VOX Gain (#51) Contains 1-100 (decimal) as displayed
//7 Disable AM/FM Dial (#4) 0 = Enable, 1 = Disable
CAT_BUFF[0] = 0xB2;
CAT_BUFF[1] = 0xA5;
break;
case 0x64 : //
break;
case 0x67 : //6-0 SSB Mic (#46) Contains 0-100 (decimal) as displayed
CAT_BUFF[0] = 0xB2;
CAT_BUFF[1] = 0xB2;
break; case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed
case 0x78 :
Added CWL, CWU Mode, need test
2018-01-29 23:20:52 -05:00
if (cwMode == 0)
{
if (isUSB)
CAT_BUFF[0] = CAT_MODE_USB;
else
CAT_BUFF[0] = CAT_MODE_LSB;
}
else if (cwMode == 1)
{
CAT_BUFF[0] = CAT_MODE_CW;
}
else if (cwMode == 2)
{
CAT_BUFF[0] = CAT_MODE_CW;
}
beta 0.25 commit
2018-01-09 21:34:15 -05:00
if (CAT_BUFF[0] != 0) CAT_BUFF[0] = 1 << 5;
break;
case 0x79 : //
//1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1
//3 PRI On/Off 0 = Off, 1 = On
//DW On/Off 0 = Off, 1 = On
//SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down
//ART On/Off 0 = Off, 1 = On
CAT_BUFF[0] = 0x00;
CAT_BUFF[1] = 0x00;
break;
case 0x7A : //SPLIT
//7A 0 HF Antenna Select 0 = Front, 1 = Rear
//7A 1 6 M Antenna Select 0 = Front, 1 = Rear
//7A 2 FM BCB Antenna Select 0 = Front, 1 = Rear
//7A 3 Air Antenna Select 0 = Front, 1 = Rear
//7A 4 2 M Antenna Select 0 = Front, 1 = Rear
//7A 5 UHF Antenna Select 0 = Front, 1 = Rear
//7A 6 ? ?
//7A 7 SPL On/Off 0 = Off, 1 = On
display test and split TX/RX added
2018-01-29 22:13:52 -05:00
CAT_BUFF[0] = (splitOn ? 0xFF : 0x7F);
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
case 0xB3 : //
CAT_BUFF[0] = 0x00;
CAT_BUFF[1] = 0x4D;
break;
}
// sent the data
SendCatData(2);
}
void WriteEEPRom_FT817(byte fromType)
{
v0.29 prepare
2018-01-20 08:05:04 -05:00
//byte temp0 = CAT_BUFF[0];
beta 0.25 commit
2018-01-09 21:34:15 -05:00
byte temp1 = CAT_BUFF[1];
CAT_BUFF[0] = 0;
CAT_BUFF[1] = 0;
if (fromType == 2 || fromType == 3) {
SendCatData(2);
Serial.write(ACK);
return;
}
switch (temp1)
{
case 0x55 :
//0 : VFO A/B 0 = VFO-A, 1 = VFO-B
//1 : MTQMB Select 0 = (Not MTQMB), 1 = MTQMB ("Memory Tune Quick Memory Bank")
//2 : QMB Select 0 = (Not QMB), 1 = QMB ("Quick Memory Bank")
//3 :
//4 : Home Select 0 = (Not HOME), 1 = HOME memory
//5 : Memory/MTUNE select 0 = Memory, 1 = MTUNE
//6 :
//7 : MEM/VFO Select 0 = Memory, 1 = VFO (A or B - see bit 0)
if (CAT_BUFF[2] & 0x01) //vfoB
{
//nowVFO Check
if (vfoActive != VFO_B)
{
CatVFOToggle(false, fromType);
}
}
else
{
//vfoA
if (vfoActive != VFO_A)
{
CatVFOToggle(false, fromType);
}
}
break;
/*
case 0x57 : //
//0 : 1-0 AGC Mode 00 = Auto, 01 = Fast, 10 = Slow, 11 = Off
//2 DSP On/Off 0 = Off, 1 = On (Display format)
//4 PBT On/Off 0 = Off, 1 = On (Passband Tuning)
//5 NB On/Off 0 = Off, 1 = On (Noise Blanker)
//6 Lock On/Off 0 = Off, 1 = On (Dial Lock)
//7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning)
CAT_BUFF[0] = 0xC0;
CAT_BUFF[1] = 0x40;
break;
case 0x59 : // band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom)
//http://www.ka7oei.com/ft817_memmap.html
//CAT_BUFF[0] = 0xC2;
//CAT_BUFF[1] = 0x82;
break;
case 0x5C : //Beep Volume (0-100) (#13)
CAT_BUFF[0] = 0xB2;
CAT_BUFF[1] = 0x42;
break;
*/
case 0x5E :
//3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz
//5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel
//7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW
sideTonePitch = (CAT_BUFF[2] & 0x0F);
if (sideTonePitch != 0 || sideToneSub != 0)
{
sideTone = (sideTonePitch * 50 + 300) + sideToneSub;
printLineF2(F("Sidetone set! CAT"));
EEPROM.put(CW_SIDETONE, sideTone);
change delaytimes via cat
2018-01-17 00:05:20 -05:00
delay(300); //If timeout errors occur in the calling software, remove them
fixed cw adc range bug
2018-01-29 04:38:48 -05:00
clearLine2();
beta 0.25 commit
2018-01-09 21:34:15 -05:00
}
break;
case 0x61 : //Sidetone (Volume) (#44)
sideToneSub = (CAT_BUFF[2] & 0x7F);
if (sideTonePitch != 0 || sideToneSub != 0)
{
sideTone = (sideTonePitch * 50 + 300) + sideToneSub;
printLineF2(F("Sidetone set! CAT"));
EEPROM.put(CW_SIDETONE, sideTone);
change delaytimes via cat
2018-01-17 00:05:20 -05:00
delay(300); //If timeout errors occur in the calling software, remove them
fixed cw adc range bug
2018-01-29 04:38:48 -05:00
clearLine2();
line2DisplayStatus = 0;
beta 0.25 commit
2018-01-09 21:34:15 -05:00
}
break;
/*
case 0x5F : //
//4-0 CW Weight (1.:2.5-1:4.5) (#22) From 0 to 14 (HEX) with 0 = 1:2.5, incrementing in 0.1 weight steps
//5 420 ARS (#2) 0 = Off, 1 = On
//6 144 ARS (#1) 0 = Off, 1 = On
//7 Sql/RF-G (#45) 0 = Off, 1 = On
CAT_BUFF[0] = 0x32;
CAT_BUFF[1] = 0x08;
break;
*/
case 0x60 : //CW Delay (10-2500 ms) (#17) From 1 to 250 (decimal) with each step representing 10 ms
//CAT_BUFF[0] = 0x19;
cwDelayTime = CAT_BUFF[2];
printLineF2(F("CW Speed set!"));
EEPROM.put(CW_DELAY, cwDelayTime);
change delaytimes via cat
2018-01-17 00:05:20 -05:00
delay(300);
fixed cw adc range bug
2018-01-29 04:38:48 -05:00
clearLine2();
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
case 0x62 : //
//5-0 CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
//7-6 Batt-Chg (6/8/10 Hours (#11) 00 = 6 Hours, 01 = 8 Hours, 10 = 10 Hours
cwSpeed = 1200 / ((CAT_BUFF[2] & 0x3F) + 4);
printLineF2(F("CW Speed set!"));
EEPROM.put(CW_SPEED, cwSpeed);
change delaytimes via cat
2018-01-17 00:05:20 -05:00
delay(300);
fixed cw adc range bug
2018-01-29 04:38:48 -05:00
clearLine2();
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
/*
case 0x63 : //
//6-0 VOX Gain (#51) Contains 1-100 (decimal) as displayed
//7 Disable AM/FM Dial (#4) 0 = Enable, 1 = Disable
CAT_BUFF[0] = 0xB2;
CAT_BUFF[1] = 0xA5;
break;
case 0x64 : //
//CAT_BUFF[0] = 0xA5;
//CAT_BUFF[1] = 0x00;
break;
case 0x67 : //6-0 SSB Mic (#46) Contains 0-100 (decimal) as displayed
CAT_BUFF[0] = 0xB2;
CAT_BUFF[1] = 0xB2;
//break; case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed
//CAT_BUFF[0] = 0x32;
//CAT_BUFF[1] = 0x32;
//break;
case 0x78 :
CAT_BUFF[0] = catGetMode();
// check, it must be a bit argument
if (CAT_BUFF[0] != 0) CAT_BUFF[0] = 1<<5;
break;
case 0x79 : //
//1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1
//3 PRI On/Off 0 = Off, 1 = On
//DW On/Off 0 = Off, 1 = On
//SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down
//ART On/Off 0 = Off, 1 = On
CAT_BUFF[0] = 0x00;
CAT_BUFF[1] = 0x00;
break;
case 0x7A : //SPLIT
//7A 0 HF Antenna Select 0 = Front, 1 = Rear
//7A 1 6 M Antenna Select 0 = Front, 1 = Rear
//7A 2 FM BCB Antenna Select 0 = Front, 1 = Rear
//7A 3 Air Antenna Select 0 = Front, 1 = Rear
//7A 4 2 M Antenna Select 0 = Front, 1 = Rear
//7A 5 UHF Antenna Select 0 = Front, 1 = Rear
//7A 6 ? ?
//7A 7 SPL On/Off 0 = Off, 1 = On
CAT_BUFF[0] = (isSplitOn ? 0xFF : 0x7F);
break;
case 0xB3 : //
CAT_BUFF[0] = 0x00;
CAT_BUFF[1] = 0x4D;
break;
*/
}
// sent the data
SendCatData(2);
Serial.write(ACK);
}
Add Support SDR Receiver and improve ATT
2018-04-07 08:32:01 -04:00
const byte anlogPinIndex[6] = {A0, A1, A2, A3, A6, A7};
//Read ADC Value by uBITX Manager Software
void ReadADCValue(void)
{
//ADC MAP for uBITX
int readedADCValue;
//5BYTES
//CAT_BUFF[0] [1] [2] [3] [4] //4 COMMAND
//0 READ ADDRESS
readedADCValue = analogRead(anlogPinIndex[CAT_BUFF[0]]);
CAT_BUFF[0] = readedADCValue >> 8;
CAT_BUFF[1] = readedADCValue;
SendCatData(2);
Serial.write(ACK);
}
void SetIFSValue(void)
{
//Set IFShift Value
isIFShift = CAT_BUFF[0];
ifShiftValue = CAT_BUFF[1] + CAT_BUFF[2] * 256;
setFrequency(frequency);
SetCarrierFreq();
updateLine2Buffer(1); //option, perhap not need
Serial.write(ACK);
}
version0.35
2018-02-06 02:13:05 -05:00
//void CatRxStatus(byte fromType)
void CatRxStatus(void) //for remove warning
beta 0.25 commit
2018-01-09 21:34:15 -05:00
{
Modfied SMeter and CAT
2018-05-03 03:20:09 -04:00
byte sMeterValue = 0;
beta 0.25 commit
2018-01-09 21:34:15 -05:00
/*
http://www.ka7oei.com/ft817_meow.html
Command E7 - Read Receiver Status: This command returns one byte. Its contents are valid only when the '817 is in receive mode and it should be ignored when transmitting.
The lower 4 bits (0-3) of this byte indicate the current S-meter reading. 00 refers to an S-Zero reading, 04 = S4, 09 = S9, 0A = "10 over," 0B = "20 over" and so on up to 0F.
Bit 4 contains no useful information.
Bit 5 is 0 in non-FM modes, and it is 0 if the discriminator is centered (within 3.5 kHz for standard FM) when in the FM, FMN, or PKT modes, and 1 if the receiver is off-frequency.
Bit 6 is 0 if the CTCSS or DCS is turned off (or in a mode where it is not available.) It is also 0 if there is a signal being receive and the correct CTCSS tone or DCS code is being decoded.
It is 1 if there is a signal and the CTCSS/DCS decoding is enable, but the wrong CTCSS tone, DCS code, or no CTCSS/DCS is present.
Bit 7 is 0 if there is a signal present, or 1 if the receiver is squelched.
*/
// The lower 4 bits (0-3) of this byte indicate the current S-meter reading. 00 refers to an S-Zero reading, 04 = S4, 09 = S9, 0A = "10 over," 0B = "20 over" and so on up to 0F.
Modfied SMeter and CAT
2018-05-03 03:20:09 -04:00
//0~8
switch (scaledSMeter)
{
case 8 : sMeterValue = 0x0B;
break;
case 7 : sMeterValue = 0x0A;
break;
case 6 : sMeterValue = 0x09;
break;
case 5 : sMeterValue = 0x07;
break;
case 4 : sMeterValue = 0x05;
break;
case 3 : sMeterValue = 0x04;
break;
case 2 : sMeterValue = 0x02;
break;
case 1 : sMeterValue = 0x01;
break;
}
/*
sMeterValue = (scaledSMeter * 2) -1;
if (sMeterValue > 0)
sMeterValue--;
*/
beta 0.25 commit
2018-01-09 21:34:15 -05:00
CAT_BUFF[0] = sMeterValue & 0b00001111;
SendCatData(1);
}
version0.35
2018-02-06 02:13:05 -05:00
//void CatTxStatus(byte fromType)
void CatTxStatus(void) //for remove warning
beta 0.25 commit
2018-01-09 21:34:15 -05:00
{
boolean isHighSWR = false;
boolean isSplitOn = false;
/*
Inverted -> *ptt = ((p->tx_status & 0x80) == 0); <-- souce code in ft817.c (hamlib)
*/
CAT_BUFF[0] = ((inTx ? 0 : 1) << 7) +
((isHighSWR ? 1 : 0) << 6) + //hi swr off / on
((isSplitOn ? 1 : 0) << 5) + //Split on / off
(0 << 4) + //dummy data
0x08; //P0 meter data
SendCatData(1);
}
unsigned long rxBufferArriveTime = 0;
byte rxBufferCheckCount = 0;
//Prevent Stack Overflow
byte isProcessCheck_Cat = 0;
//fromType normal : 0, TX : 1, CW_STRAIGHT : 2, CW_PADDLE : 3, CW_AUTOMODE : 4
//if cw mode, no delay
void Check_Cat(byte fromType)
{
byte i;
//Check Serial Port Buffer
if (Serial.available() == 0)
{
//Set Buffer Clear status
rxBufferCheckCount = 0;
return;
}
else if (Serial.available() < 5)
{
//First Arrived
if (rxBufferCheckCount == 0)
{
rxBufferCheckCount = Serial.available();
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
}
else if (rxBufferArriveTime < millis()) //timeout
{
//Clear Buffer
for (i = 0; i < Serial.available(); i++)
rxBufferCheckCount = Serial.read();
rxBufferCheckCount = 0;
}
else if (rxBufferCheckCount < Serial.available()) //increase buffer count, slow arrived
{
rxBufferCheckCount = Serial.available();
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
}
return;
}
//Arived CAT DATA
for (i = 0; i < 5; i++)
CAT_BUFF[i] = Serial.read();
if (isProcessCheck_Cat == 1)
return;
isProcessCheck_Cat = 1;
//reference : http://www.ka7oei.com/ft817_meow.html
switch(CAT_BUFF[4])
{
//The stability has not been verified and there seems to be no need. so i remarked codes,
//if you need, unmark lines
/*
case 0x00 : //Lock On
if (isDialLock == 1) //This command returns 00 if it was unlocked, and F0 if already locked.
CAT_BUFF[0] = 0xF0;
else {
CAT_BUFF[0] = 0x00;
setDialLock(1, fromType);
}
Serial.write(CAT_BUFF[0]); //Time
break;
case 0x80 : //Lock Off
if (isDialLock == 0) //This command returns 00 if the '817 was already locked, and F0 (HEX) if already unlocked.
CAT_BUFF[0] = 0xF0;
else {
CAT_BUFF[0] = 0x00;
setDialLock(0, fromType);
}
Serial.write(CAT_BUFF[0]); //Time
break;
*/
case 0x01 : //Set Frequency
CatSetFreq(fromType);
break;
case 0x02 : //Split On
case 0x82: //Split Off
version0.35
2018-02-06 02:13:05 -05:00
CatSetSplit(CAT_BUFF[4] == 0x02);
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
case 0x03 : //Read Frequency and mode
version0.35
2018-02-06 02:13:05 -05:00
CatGetFreqMode(frequency);
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
case 0x07 : //Set Operating Mode
CatSetMode(CAT_BUFF[0], fromType);
break;
case 0x08 : //Set PTT_ON
case 0x88: //Set PTT Off
CatSetPTT(CAT_BUFF[4] == 0x08, fromType);
break;
case 0x81: //Toggle VFO
CatVFOToggle(true, fromType);
break;
case 0xDB: //Read uBITX EEPROM Data
version0.35
2018-02-06 02:13:05 -05:00
ReadEEPRom(); //Call by uBITX Manager Program
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
case 0xBB: //Read FT-817 EEPROM Data (for comfirtable)
version0.35
2018-02-06 02:13:05 -05:00
ReadEEPRom_FT817();
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
case 0xDC: //Write uBITX EEPROM Data
version0.35
2018-02-06 02:13:05 -05:00
WriteEEPRom(); //Call by uBITX Manager Program
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
case 0xBC: //Write FT-817 EEPROM Data (for comfirtable)
WriteEEPRom_FT817(fromType);
break;
Add Support SDR Receiver and improve ATT
2018-04-07 08:32:01 -04:00
case 0xDD: //Read uBITX ADC Data
ReadADCValue(); //Call by uBITX Manager Program
break;
case 0xDE: //IF-Shift Control by CAT
SetIFSValue(); //
break;
beta 0.25 commit
2018-01-09 21:34:15 -05:00
case 0xE7 : //Read RX Status
version0.35
2018-02-06 02:13:05 -05:00
CatRxStatus();
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
case 0xF7: //Read TX Status
version0.35
2018-02-06 02:13:05 -05:00
CatTxStatus();
beta 0.25 commit
2018-01-09 21:34:15 -05:00
break;
default:
/*
char buff[16];
sprintf(buff, "DEFAULT : %x", CAT_BUFF[4]);
printLine2(buff);
*/
Serial.write(ACK);
break;
} //end of switch
isProcessCheck_Cat = 0;
}
void Init_Cat(long baud, int portConfig)
{
Serial.begin(baud, portConfig);
Serial.flush();
}
Reference in New Issue Copy Permalink