odie/ubitxv6
1
0
Fork 0
mirror of https://codeberg.org/mclemens/ubitxv6.git synced 2024-06-03 01:50:53 +00:00
Code Issues Packages Projects Releases Wiki Activity
e0a963f9ed
ubitxv6/ubitx_cat.cpp
Ashhar Farhan cda86a1b12
Refactored code 
The files are not split into .cpp and .h files. The main file ubitxxxx.cpp will have the main routines to control the radio, initialization and main loop. The user interface is implemented in ubitx_ui.cpp, the code for setup/calibration routines is in setup.cpp. Nano gui, keyer, morse.cpp (morse reader) are all libaries that have minimum dependencies on each other.
2019-12-18 12:02:44 +05:30

458 lines
12 KiB
C++
Raw Blame History

#include <Arduino.h>
#include "ubitx.h"
#include "nano_gui.h"
/**
* The CAT protocol is used by many radios to provide remote control to comptuers through
* the serial port.
*
* This is very much a work in progress. Parts of this code have been liberally
* borrowed from other GPLicensed works like hamlib.
*
* WARNING : This is an unstable version and it has worked with fldigi,
* it gives time out error with WSJTX 1.8.0
*/
static unsigned long rxBufferArriveTime = 0;
static byte rxBufferCheckCount = 0;
#define CAT_RECEIVE_TIMEOUT 500
static byte cat[5];
static byte insideCat = 0;
static byte useOpenRadioControl = 0;
//for broken protocol
#define CAT_RECEIVE_TIMEOUT 500
#define CAT_MODE_LSB 0x00
#define CAT_MODE_USB 0x01
#define CAT_MODE_CW 0x02
#define CAT_MODE_CWR 0x03
#define CAT_MODE_AM 0x04
#define CAT_MODE_FM 0x08
#define CAT_MODE_DIG 0x0A
#define CAT_MODE_PKT 0x0C
#define CAT_MODE_FMN 0x88
#define ACK 0
unsigned int skipTimeCount = 0;
byte setHighNibble(byte b,byte v) {
// Clear the high nibble
b &= 0x0f;
// Set the high nibble
return b | ((v & 0x0f) << 4);
}
byte setLowNibble(byte b,byte v) {
// Clear the low nibble
b &= 0xf0;
// Set the low nibble
return b | (v & 0x0f);
}
byte getHighNibble(byte b) {
return (b >> 4) & 0x0f;
}
byte getLowNibble(byte b) {
return b & 0x0f;
}
// Takes a number and produces the requested number of decimal digits, staring
// from the least significant digit.
//
void getDecimalDigits(unsigned long number,byte* result,int digits) {
for (int i = 0; i < digits; i++) {
// "Mask off" (in a decimal sense) the LSD and return it
result[i] = number % 10;
// "Shift right" (in a decimal sense)
number /= 10;
}
}
// Takes a frequency and writes it into the CAT command buffer in BCD form.
//
void writeFreq(unsigned long freq,byte* cmd) {
// Convert the frequency to a set of decimal digits. We are taking 9 digits
// so that we can get up to 999 MHz. But the protocol doesn't care about the
// LSD (1's place), so we ignore that digit.
byte digits[9];
getDecimalDigits(freq,digits,9);
// Start from the LSB and get each nibble
cmd[3] = setLowNibble(cmd[3],digits[1]);
cmd[3] = setHighNibble(cmd[3],digits[2]);
cmd[2] = setLowNibble(cmd[2],digits[3]);
cmd[2] = setHighNibble(cmd[2],digits[4]);
cmd[1] = setLowNibble(cmd[1],digits[5]);
cmd[1] = setHighNibble(cmd[1],digits[6]);
cmd[0] = setLowNibble(cmd[0],digits[7]);
cmd[0] = setHighNibble(cmd[0],digits[8]);
}
// This function takes a frquency that is encoded using 4 bytes of BCD
// representation and turns it into an long measured in Hz.
//
// [12][34][56][78] = 123.45678? Mhz
//
unsigned long readFreq(byte* cmd) {
// Pull off each of the digits
byte d7 = getHighNibble(cmd[0]);
byte d6 = getLowNibble(cmd[0]);
byte d5 = getHighNibble(cmd[1]);
byte d4 = getLowNibble(cmd[1]);
byte d3 = getHighNibble(cmd[2]);
byte d2 = getLowNibble(cmd[2]);
byte d1 = getHighNibble(cmd[3]);
byte d0 = getLowNibble(cmd[3]);
return
(unsigned long)d7 * 100000000L +
(unsigned long)d6 * 10000000L +
(unsigned long)d5 * 1000000L +
(unsigned long)d4 * 100000L +
(unsigned long)d3 * 10000L +
(unsigned long)d2 * 1000L +
(unsigned long)d1 * 100L +
(unsigned long)d0 * 10L;
}
//void ReadEEPRom_FT817(byte fromType)
void catReadEEPRom(void)
{
//for remove warnings
byte temp0 = cat[0];
byte temp1 = cat[1];
/*
itoa((int) cat[0], b, 16);
strcat(b, ":");
itoa((int) cat[1], c, 16);
strcat(b, c);
printLine2(b);
*/
cat[0] = 0;
cat[1] = 0;
//for remove warnings[1] = 0;
switch (temp1)
{
case 0x45 : //
if (temp0 == 0x03)
{
cat[0] = 0x00;
cat[1] = 0xD0;
}
break;
case 0x47 : //
if (temp0 == 0x03)
{
cat[0] = 0xDC;
cat[1] = 0xE0;
}
break;
case 0x55 :
//0 : VFO A/B 0 = VFO-A, 1 = VFO-B
//1 : MTQMB Select 0 = (Not MTQMB), 1 = MTQMB ("Memory Tune Quick Memory Bank")
//2 : QMB Select 0 = (Not QMB), 1 = QMB ("Quick Memory Bank")
//3 :
//4 : Home Select 0 = (Not HOME), 1 = HOME memory
//5 : Memory/MTUNE select 0 = Memory, 1 = MTUNE
//6 :
//7 : MEM/VFO Select 0 = Memory, 1 = VFO (A or B - see bit 0)
cat[0] = 0x80 + (vfoActive == VFO_B ? 1 : 0);
cat[1] = 0x00;
break;
case 0x57 : //
//0 : 1-0 AGC Mode 00 = Auto, 01 = Fast, 10 = Slow, 11 = Off
//2 DSP On/Off 0 = Off, 1 = On (Display format)
//4 PBT On/Off 0 = Off, 1 = On (Passband Tuning)
//5 NB On/Off 0 = Off, 1 = On (Noise Blanker)
//6 Lock On/Off 0 = Off, 1 = On (Dial Lock)
//7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning)
cat[0] = 0xC0;
cat[1] = 0x40;
break;
case 0x59 : // band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom)
//http://www.ka7oei.com/ft817_memmap.html
//CAT_BUFF[0] = 0xC2;
//CAT_BUFF[1] = 0x82;
break;
case 0x5C : //Beep Volume (0-100) (#13)
cat[0] = 0xB2;
cat[1] = 0x42;
break;
case 0x5E :
//3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz
//5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel
//7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW
//CAT_BUFF[0] = 0x08;
cat[0] = (sideTone - 300)/50;
cat[1] = 0x25;
break;
case 0x61 : //Sidetone (Volume) (#44)
cat[0] = sideTone % 50;
cat[1] = 0x08;
break;
case 0x5F : //
//4-0 CW Weight (1.:2.5-1:4.5) (#22) From 0 to 14 (HEX) with 0 = 1:2.5, incrementing in 0.1 weight steps
//5 420 ARS (#2) 0 = Off, 1 = On
//6 144 ARS (#1) 0 = Off, 1 = On
//7 Sql/RF-G (#45) 0 = Off, 1 = On
cat[0] = 0x32;
cat[1] = 0x08;
break;
case 0x60 : //CW Delay (10-2500 ms) (#17) From 1 to 250 (decimal) with each step representing 10 ms
cat[0] = cwDelayTime;
cat[1] = 0x32;
break;
case 0x62 : //
//5-0 CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
//7-6 Batt-Chg (6/8/10 Hours (#11) 00 = 6 Hours, 01 = 8 Hours, 10 = 10 Hours
//CAT_BUFF[0] = 0x08;
cat[0] = 1200 / cwSpeed - 4;
cat[1] = 0xB2;
break;
case 0x63 : //
//6-0 VOX Gain (#51) Contains 1-100 (decimal) as displayed
//7 Disable AM/FM Dial (#4) 0 = Enable, 1 = Disable
cat[0] = 0xB2;
cat[1] = 0xA5;
break;
case 0x64 : //
break;
case 0x67 : //6-0 SSB Mic (#46) Contains 0-100 (decimal) as displayed
cat[0] = 0xB2;
cat[1] = 0xB2;
break; case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed
case 0x78 :
if (isUSB)
cat[0] = CAT_MODE_USB;
else
cat[0] = CAT_MODE_LSB;
if (cat[0] != 0) cat[0] = 1 << 5;
break;
case 0x79 : //
//1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1
//3 PRI On/Off 0 = Off, 1 = On
//DW On/Off 0 = Off, 1 = On
//SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down
//ART On/Off 0 = Off, 1 = On
cat[0] = 0x00;
cat[1] = 0x00;
break;
case 0x7A : //SPLIT
//7A 0 HF Antenna Select 0 = Front, 1 = Rear
//7A 1 6 M Antenna Select 0 = Front, 1 = Rear
//7A 2 FM BCB Antenna Select 0 = Front, 1 = Rear
//7A 3 Air Antenna Select 0 = Front, 1 = Rear
//7A 4 2 M Antenna Select 0 = Front, 1 = Rear
//7A 5 UHF Antenna Select 0 = Front, 1 = Rear
//7A 6 ? ?
//7A 7 SPL On/Off 0 = Off, 1 = On
cat[0] = (splitOn ? 0xFF : 0x7F);
break;
case 0xB3 : //
cat[0] = 0x00;
cat[1] = 0x4D;
break;
}
// sent the data
Serial.write(cat, 2);
}
void processCATCommand2(byte* cmd) {
byte response[5];
unsigned long f;
switch(cmd[4]){
/* case 0x00:
response[0]=0;
Serial.write(response, 1);
break;
*/
case 0x01:
//set frequency
f = readFreq(cmd);
setFrequency(f);
updateDisplay();
response[0]=0;
Serial.write(response, 1);
//sprintf(b, "set:%ld", f);
//printLine2(b);
break;
case 0x02:
//split on
splitOn = 1;
break;
case 0x82:
//split off
splitOn = 0;
break;
case 0x03:
writeFreq(frequency,response); // Put the frequency into the buffer
if (isUSB)
response[4] = 0x01; //USB
else
response[4] = 0x00; //LSB
Serial.write(response,5);
//printLine2("cat:getfreq");
break;
case 0x07: // set mode
if (cmd[0] == 0x00 || cmd[0] == 0x03)
isUSB = 0;
else
isUSB = 1;
response[0] = 0x00;
Serial.write(response, 1);
setFrequency(frequency);
//printLine2("cat: mode changed");
//updateDisplay();
break;
case 0x08: // PTT On
if (!inTx) {
response[0] = 0;
txCAT = true;
startTx(TX_SSB);
updateDisplay();
} else {
response[0] = 0xf0;
}
Serial.write(response,1);
updateDisplay();
break;
case 0x88 : //PTT OFF
if (inTx) {
stopTx();
txCAT = false;
}
response[0] = 0;
Serial.write(response,1);
updateDisplay();
break;
case 0x81:
//toggle the VFOs
response[0] = 0;
if (vfoActive == VFO_A)
switchVFO(VFO_B);
else
switchVFO(VFO_A);
//menuVfoToggle(1); // '1' forces it to change the VFO
Serial.write(response,1);
updateDisplay();
break;
case 0xBB: //Read FT-817 EEPROM Data (for comfirtable)
catReadEEPRom();
break;
case 0xe7 :
// get receiver status, we have hardcoded this as
//as we dont' support ctcss, etc.
response[0] = 0x09;
Serial.write(response,1);
break;
case 0xf7:
{
boolean isHighSWR = false;
boolean isSplitOn = false;
/*
Inverted -> *ptt = ((p->tx_status & 0x80) == 0); <-- souce code in ft817.c (hamlib)
*/
response[0] = ((inTx ? 0 : 1) << 7) +
((isHighSWR ? 1 : 0) << 6) + //hi swr off / on
((isSplitOn ? 1 : 0) << 5) + //Split on / off
(0 << 4) + //dummy data
0x08; //P0 meter data
Serial.write(response, 1);
}
break;
default:
//somehow, get this to print the four bytes
ultoa(*((unsigned long *)cmd), c, 16);
/*itoa(cmd[4], b, 16);
strcat(b, ">");
strcat(b, c);
printLine2(b);*/
response[0] = 0x00;
Serial.write(response[0]);
}
insideCat = false;
}
int catCount = 0;
void checkCAT(){
byte i;
//Check Serial Port Buffer
if (Serial.available() == 0) { //Set Buffer Clear status
rxBufferCheckCount = 0;
return;
}
else if (Serial.available() < 5) { //First Arrived
if (rxBufferCheckCount == 0){
rxBufferCheckCount = Serial.available();
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
}
else if (rxBufferArriveTime < millis()){ //Clear Buffer
for (i = 0; i < Serial.available(); i++)
rxBufferCheckCount = Serial.read();
rxBufferCheckCount = 0;
}
else if (rxBufferCheckCount < Serial.available()){ // Increase buffer count, slow arrive
rxBufferCheckCount = Serial.available();
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
}
return;
}
//Arived CAT DATA
for (i = 0; i < 5; i++)
cat[i] = Serial.read();
//this code is not re-entrant.
if (insideCat == 1)
return;
insideCat = 1;
/**
* This routine is enabled to debug the cat protocol
**/
catCount++;
/*
if (cat[4] != 0xf7 && cat[4] != 0xbb && cat[4] != 0x03){
sprintf(b, "%d %02x %02x%02x%02x%02x", catCount, cat[4],cat[0], cat[1], cat[2], cat[3]);
printLine2(b);
}
*/
/*
if (!doingCAT){
doingCAT = 1;
displayText("CAT on", 100,120,100,40, ILI9341_ORANGE, ILI9341_BLACK, ILI9341_WHITE);
}
*/
processCATCommand2(cat);
insideCat = 0;
}
Reference in New Issue View Git Blame Copy Permalink