mirror of
https://codeberg.org/mclemens/ubitxv6.git
synced 2024-11-04 23:37:36 -05:00
125 lines
3.1 KiB
C++
125 lines
3.1 KiB
C++
#include <Arduino.h>
|
|
#include <stdint.h>
|
|
|
|
#include "encoder.h"
|
|
#include "ubitx.h"//Pin definitions
|
|
|
|
//Normal encoder state
|
|
uint8_t prev_enc = 0;
|
|
int8_t enc_count = 0;
|
|
|
|
//Momentum encoder state
|
|
int16_t enc_count_periodic = 0;
|
|
int8_t momentum[3] = {0};
|
|
static const uint16_t CALLBACK_PERIOD_MS = 200;
|
|
static const uint8_t MOMENTUM_MULTIPLIER = 1;
|
|
|
|
uint8_t enc_state (void)
|
|
{
|
|
return (digitalRead(ENC_A)?1:0 + digitalRead(ENC_B)?2:0);
|
|
}
|
|
|
|
/*
|
|
* SmittyHalibut's encoder handling, using interrupts. Should be quicker, smoother handling.
|
|
* The Interrupt Service Routine for Pin Change Interrupts on A0-A5.
|
|
*/
|
|
ISR (PCINT1_vect)
|
|
{
|
|
uint8_t cur_enc = enc_state();
|
|
if (prev_enc == cur_enc) {
|
|
//Serial.println("unnecessary ISR");
|
|
return;
|
|
}
|
|
//Serial.print(prev_enc);
|
|
//Serial.println(cur_enc);
|
|
|
|
//these transitions point to the enccoder being rotated anti-clockwise
|
|
if ((prev_enc == 0 && cur_enc == 2) ||
|
|
(prev_enc == 2 && cur_enc == 3) ||
|
|
(prev_enc == 3 && cur_enc == 1) ||
|
|
(prev_enc == 1 && cur_enc == 0))
|
|
{
|
|
enc_count -= 1;
|
|
enc_count_periodic -= 1;
|
|
}
|
|
//these transitions point to the enccoder being rotated clockwise
|
|
else if ((prev_enc == 0 && cur_enc == 1) ||
|
|
(prev_enc == 1 && cur_enc == 3) ||
|
|
(prev_enc == 3 && cur_enc == 2) ||
|
|
(prev_enc == 2 && cur_enc == 0))
|
|
{
|
|
enc_count += 1;
|
|
enc_count_periodic += 1;
|
|
}
|
|
else {
|
|
// A change to two states, we can't tell whether it was forward or backward, so we skip it.
|
|
//Serial.println("skip");
|
|
}
|
|
prev_enc = cur_enc; // Record state for next pulse interpretation
|
|
}
|
|
|
|
/*
|
|
* Setup the encoder interrupts and global variables.
|
|
*/
|
|
void pci_setup(byte pin) {
|
|
*digitalPinToPCMSK(pin) |= bit (digitalPinToPCMSKbit(pin)); // enable pin
|
|
PCIFR |= bit (digitalPinToPCICRbit(pin)); // clear any outstanding interrupt
|
|
PCICR |= bit (digitalPinToPCICRbit(pin)); // enable interrupt for the group
|
|
}
|
|
|
|
void enc_setup(void)
|
|
{
|
|
enc_count = 0;
|
|
// This is already done in setup() ?
|
|
//pinMode(ENC_A, INPUT);
|
|
//pinMode(ENC_B, INPUT);
|
|
prev_enc = enc_state();
|
|
|
|
// Setup Pin Change Interrupts for the encoder inputs
|
|
pci_setup(ENC_A);
|
|
pci_setup(ENC_B);
|
|
|
|
//Set up timer interrupt for momentum
|
|
TCCR1A = 0;//"normal" mode
|
|
TCCR1B = 3;//clock divider of 64
|
|
TCNT1 = 0;//start counting at 0
|
|
OCR1A = F_CPU * (unsigned long)CALLBACK_PERIOD_MS / 1000 / 64;//set target number
|
|
TIMSK1 |= (1 << OCIE1A);//enable interrupt
|
|
}
|
|
|
|
ISR(TIMER1_COMPA_vect)
|
|
{
|
|
momentum[2] = momentum[1];
|
|
momentum[1] = momentum[0];
|
|
momentum[0] = enc_count_periodic;
|
|
enc_count_periodic = 0;
|
|
}
|
|
|
|
int8_t min_momentum_mag()
|
|
{
|
|
int8_t min_mag = 127;
|
|
for(uint8_t i = 0; i < sizeof(momentum)/sizeof(momentum[0]); ++i){
|
|
int8_t mag = abs(momentum[i]);
|
|
if(mag < min_mag){
|
|
min_mag = mag;
|
|
}
|
|
}
|
|
return min_mag;
|
|
}
|
|
|
|
int enc_read(void) {
|
|
if(0 != enc_count){
|
|
int16_t ret = enc_count;
|
|
int8_t s = (enc_count < 0) ? -1 : 1;
|
|
int8_t momentum_mag = min_momentum_mag();
|
|
if(momentum_mag >= 20){
|
|
ret += s*40;
|
|
}
|
|
else if(momentum_mag >= 5){
|
|
ret += s*(20 + momentum_mag)/(20 - momentum_mag);
|
|
}
|
|
enc_count = 0;
|
|
return ret;
|
|
}
|
|
return 0;
|
|
} |