mirror of
https://codeberg.org/mclemens/ubitxv6.git
synced 2024-11-04 23:37:36 -05:00
447 lines
12 KiB
C++
447 lines
12 KiB
C++
#include <Arduino.h>
|
|
#include "settings.h"
|
|
#include "ubitx.h"
|
|
#include "nano_gui.h"
|
|
|
|
/**
|
|
* The CAT protocol is used by many radios to provide remote control to comptuers through
|
|
* the serial port.
|
|
*
|
|
* This is very much a work in progress. Parts of this code have been liberally
|
|
* borrowed from other GPLicensed works like hamlib.
|
|
*
|
|
* WARNING : This is an unstable version and it has worked with fldigi,
|
|
* it gives time out error with WSJTX 1.8.0
|
|
*/
|
|
|
|
static unsigned long rxBufferArriveTime = 0;
|
|
static byte rxBufferCheckCount = 0;
|
|
#define CAT_RECEIVE_TIMEOUT 500
|
|
static byte cat[5];
|
|
static byte insideCat = 0;
|
|
|
|
//for broken protocol
|
|
#define CAT_RECEIVE_TIMEOUT 500
|
|
|
|
#define CAT_MODE_LSB 0x00
|
|
#define CAT_MODE_USB 0x01
|
|
#define CAT_MODE_CW 0x02
|
|
#define CAT_MODE_CWR 0x03
|
|
#define CAT_MODE_AM 0x04
|
|
#define CAT_MODE_FM 0x08
|
|
#define CAT_MODE_DIG 0x0A
|
|
#define CAT_MODE_PKT 0x0C
|
|
#define CAT_MODE_FMN 0x88
|
|
|
|
#define ACK 0
|
|
|
|
unsigned int skipTimeCount = 0;
|
|
|
|
byte setHighNibble(byte b,byte v) {
|
|
// Clear the high nibble
|
|
b &= 0x0f;
|
|
// Set the high nibble
|
|
return b | ((v & 0x0f) << 4);
|
|
}
|
|
|
|
byte setLowNibble(byte b,byte v) {
|
|
// Clear the low nibble
|
|
b &= 0xf0;
|
|
// Set the low nibble
|
|
return b | (v & 0x0f);
|
|
}
|
|
|
|
byte getHighNibble(byte b) {
|
|
return (b >> 4) & 0x0f;
|
|
}
|
|
|
|
byte getLowNibble(byte b) {
|
|
return b & 0x0f;
|
|
}
|
|
|
|
// Takes a number and produces the requested number of decimal digits, staring
|
|
// from the least significant digit.
|
|
//
|
|
void getDecimalDigits(unsigned long number,byte* result,int digits) {
|
|
for (int i = 0; i < digits; i++) {
|
|
// "Mask off" (in a decimal sense) the LSD and return it
|
|
result[i] = number % 10;
|
|
// "Shift right" (in a decimal sense)
|
|
number /= 10;
|
|
}
|
|
}
|
|
|
|
// Takes a frequency and writes it into the CAT command buffer in BCD form.
|
|
//
|
|
void writeFreq(unsigned long freq,byte* cmd) {
|
|
// Convert the frequency to a set of decimal digits. We are taking 9 digits
|
|
// so that we can get up to 999 MHz. But the protocol doesn't care about the
|
|
// LSD (1's place), so we ignore that digit.
|
|
byte digits[9];
|
|
getDecimalDigits(freq,digits,9);
|
|
// Start from the LSB and get each nibble
|
|
cmd[3] = setLowNibble(cmd[3],digits[1]);
|
|
cmd[3] = setHighNibble(cmd[3],digits[2]);
|
|
cmd[2] = setLowNibble(cmd[2],digits[3]);
|
|
cmd[2] = setHighNibble(cmd[2],digits[4]);
|
|
cmd[1] = setLowNibble(cmd[1],digits[5]);
|
|
cmd[1] = setHighNibble(cmd[1],digits[6]);
|
|
cmd[0] = setLowNibble(cmd[0],digits[7]);
|
|
cmd[0] = setHighNibble(cmd[0],digits[8]);
|
|
}
|
|
|
|
// This function takes a frquency that is encoded using 4 bytes of BCD
|
|
// representation and turns it into an long measured in Hz.
|
|
//
|
|
// [12][34][56][78] = 123.45678? Mhz
|
|
//
|
|
unsigned long readFreq(byte* cmd) {
|
|
// Pull off each of the digits
|
|
byte d7 = getHighNibble(cmd[0]);
|
|
byte d6 = getLowNibble(cmd[0]);
|
|
byte d5 = getHighNibble(cmd[1]);
|
|
byte d4 = getLowNibble(cmd[1]);
|
|
byte d3 = getHighNibble(cmd[2]);
|
|
byte d2 = getLowNibble(cmd[2]);
|
|
byte d1 = getHighNibble(cmd[3]);
|
|
byte d0 = getLowNibble(cmd[3]);
|
|
return
|
|
(unsigned long)d7 * 100000000L +
|
|
(unsigned long)d6 * 10000000L +
|
|
(unsigned long)d5 * 1000000L +
|
|
(unsigned long)d4 * 100000L +
|
|
(unsigned long)d3 * 10000L +
|
|
(unsigned long)d2 * 1000L +
|
|
(unsigned long)d1 * 100L +
|
|
(unsigned long)d0 * 10L;
|
|
}
|
|
|
|
//void ReadEEPRom_FT817(byte fromType)
|
|
void catReadEEPRom(void)
|
|
{
|
|
//for remove warnings
|
|
byte temp0 = cat[0];
|
|
byte temp1 = cat[1];
|
|
|
|
cat[0] = 0;
|
|
cat[1] = 0;
|
|
//for remove warnings[1] = 0;
|
|
|
|
switch (temp1)
|
|
{
|
|
case 0x45 : //
|
|
if (temp0 == 0x03)
|
|
{
|
|
cat[0] = 0x00;
|
|
cat[1] = 0xD0;
|
|
}
|
|
break;
|
|
case 0x47 : //
|
|
if (temp0 == 0x03)
|
|
{
|
|
cat[0] = 0xDC;
|
|
cat[1] = 0xE0;
|
|
}
|
|
break;
|
|
case 0x55 :
|
|
//0 : VFO A/B 0 = VFO-A, 1 = VFO-B
|
|
//1 : MTQMB Select 0 = (Not MTQMB), 1 = MTQMB ("Memory Tune Quick Memory Bank")
|
|
//2 : QMB Select 0 = (Not QMB), 1 = QMB ("Quick Memory Bank")
|
|
//3 :
|
|
//4 : Home Select 0 = (Not HOME), 1 = HOME memory
|
|
//5 : Memory/MTUNE select 0 = Memory, 1 = MTUNE
|
|
//6 :
|
|
//7 : MEM/VFO Select 0 = Memory, 1 = VFO (A or B - see bit 0)
|
|
cat[0] = 0x80 + ((VFO_B == globalSettings.activeVfo) ? 1 : 0);
|
|
cat[1] = 0x00;
|
|
break;
|
|
case 0x57 : //
|
|
//0 : 1-0 AGC Mode 00 = Auto, 01 = Fast, 10 = Slow, 11 = Off
|
|
//2 DSP On/Off 0 = Off, 1 = On (Display format)
|
|
//4 PBT On/Off 0 = Off, 1 = On (Passband Tuning)
|
|
//5 NB On/Off 0 = Off, 1 = On (Noise Blanker)
|
|
//6 Lock On/Off 0 = Off, 1 = On (Dial Lock)
|
|
//7 FST (Fast Tuning) On/Off 0 = Off, 1 = On (Fast tuning)
|
|
|
|
cat[0] = 0xC0;
|
|
cat[1] = 0x40;
|
|
break;
|
|
case 0x59 : // band select VFO A Band Select 0000 = 160 M, 0001 = 75 M, 0010 = 40 M, 0011 = 30 M, 0100 = 20 M, 0101 = 17 M, 0110 = 15 M, 0111 = 12 M, 1000 = 10 M, 1001 = 6 M, 1010 = FM BCB, 1011 = Air, 1100 = 2 M, 1101 = UHF, 1110 = (Phantom)
|
|
//http://www.ka7oei.com/ft817_memmap.html
|
|
//CAT_BUFF[0] = 0xC2;
|
|
//CAT_BUFF[1] = 0x82;
|
|
break;
|
|
case 0x5C : //Beep Volume (0-100) (#13)
|
|
cat[0] = 0xB2;
|
|
cat[1] = 0x42;
|
|
break;
|
|
case 0x5E :
|
|
//3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz
|
|
//5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel
|
|
//7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW
|
|
//CAT_BUFF[0] = 0x08;
|
|
cat[0] = (globalSettings.cwSideToneFreq - 300)/50;
|
|
cat[1] = 0x25;
|
|
break;
|
|
case 0x61 : //globalSettings.cwSideToneFreq (Volume) (#44)
|
|
cat[0] = globalSettings.cwSideToneFreq % 50;
|
|
cat[1] = 0x08;
|
|
break;
|
|
case 0x5F : //
|
|
//4-0 CW Weight (1.:2.5-1:4.5) (#22) From 0 to 14 (HEX) with 0 = 1:2.5, incrementing in 0.1 weight steps
|
|
//5 420 ARS (#2) 0 = Off, 1 = On
|
|
//6 144 ARS (#1) 0 = Off, 1 = On
|
|
//7 Sql/RF-G (#45) 0 = Off, 1 = On
|
|
cat[0] = 0x32;
|
|
cat[1] = 0x08;
|
|
break;
|
|
case 0x60 : //CW Delay (10-2500 ms) (#17) From 1 to 250 (decimal) with each step representing 10 ms
|
|
cat[0] = globalSettings.cwActiveTimeoutMs / 10;
|
|
cat[1] = 0x32;
|
|
break;
|
|
case 0x62 : //
|
|
//5-0 CW Speed (4-60 WPM) (#21) From 0 to 38 (HEX) with 0 = 4 WPM and 38 = 60 WPM (1 WPM steps)
|
|
//7-6 Batt-Chg (6/8/10 Hours (#11) 00 = 6 Hours, 01 = 8 Hours, 10 = 10 Hours
|
|
//CAT_BUFF[0] = 0x08;
|
|
cat[0] = 1200 / globalSettings.cwDitDurationMs - 4;
|
|
cat[1] = 0xB2;
|
|
break;
|
|
case 0x63 : //
|
|
//6-0 VOX Gain (#51) Contains 1-100 (decimal) as displayed
|
|
//7 Disable AM/FM Dial (#4) 0 = Enable, 1 = Disable
|
|
cat[0] = 0xB2;
|
|
cat[1] = 0xA5;
|
|
break;
|
|
case 0x64 : //
|
|
break;
|
|
case 0x67 : //6-0 SSB Mic (#46) Contains 0-100 (decimal) as displayed
|
|
cat[0] = 0xB2;
|
|
cat[1] = 0xB2;
|
|
break; case 0x69 : //FM Mic (#29) Contains 0-100 (decimal) as displayed
|
|
case 0x78 :
|
|
if (VfoMode_e::VFO_MODE_USB == GetActiveVfoMode())
|
|
cat[0] = CAT_MODE_USB;
|
|
else
|
|
cat[0] = CAT_MODE_LSB;
|
|
|
|
if (cat[0] != 0) cat[0] = 1 << 5;
|
|
break;
|
|
case 0x79 : //
|
|
//1-0 TX Power (All bands) 00 = High, 01 = L3, 10 = L2, 11 = L1
|
|
//3 PRI On/Off 0 = Off, 1 = On
|
|
//DW On/Off 0 = Off, 1 = On
|
|
//SCN (Scan) Mode 00 = No scan, 10 = Scan up, 11 = Scan down
|
|
//ART On/Off 0 = Off, 1 = On
|
|
cat[0] = 0x00;
|
|
cat[1] = 0x00;
|
|
break;
|
|
case 0x7A : //SPLIT
|
|
//7A 0 HF Antenna Select 0 = Front, 1 = Rear
|
|
//7A 1 6 M Antenna Select 0 = Front, 1 = Rear
|
|
//7A 2 FM BCB Antenna Select 0 = Front, 1 = Rear
|
|
//7A 3 Air Antenna Select 0 = Front, 1 = Rear
|
|
//7A 4 2 M Antenna Select 0 = Front, 1 = Rear
|
|
//7A 5 UHF Antenna Select 0 = Front, 1 = Rear
|
|
//7A 6 ? ?
|
|
//7A 7 SPL On/Off 0 = Off, 1 = On
|
|
|
|
cat[0] = (globalSettings.splitOn ? 0xFF : 0x7F);
|
|
break;
|
|
case 0xB3 : //
|
|
cat[0] = 0x00;
|
|
cat[1] = 0x4D;
|
|
break;
|
|
|
|
}
|
|
|
|
// sent the data
|
|
Serial.write(cat, 2);
|
|
}
|
|
|
|
void processCATCommand2(byte* cmd) {
|
|
byte response[5];
|
|
unsigned long f;
|
|
|
|
switch(cmd[4]){
|
|
/* case 0x00:
|
|
response[0]=0;
|
|
Serial.write(response, 1);
|
|
break;
|
|
*/
|
|
case 0x01:
|
|
//set frequency
|
|
f = readFreq(cmd);
|
|
setFrequency(f);
|
|
updateDisplay();
|
|
response[0]=0;
|
|
Serial.write(response, 1);
|
|
//sprintf(b, "set:%ld", f);
|
|
//printLine2(b);
|
|
break;
|
|
|
|
case 0x02:
|
|
//split on
|
|
globalSettings.splitOn = 1;
|
|
break;
|
|
case 0x82:
|
|
//split off
|
|
globalSettings.splitOn = 0;
|
|
break;
|
|
|
|
case 0x03:
|
|
writeFreq(GetActiveVfoFreq(),response); // Put the frequency into the buffer
|
|
if (VfoMode_e::VFO_MODE_USB == GetActiveVfoMode())
|
|
response[4] = 0x01; //USB
|
|
else
|
|
response[4] = 0x00; //LSB
|
|
Serial.write(response,5);
|
|
//printLine2("cat:getfreq");
|
|
break;
|
|
|
|
case 0x07: // set mode
|
|
if (cmd[0] == 0x00 || cmd[0] == 0x03)
|
|
SetActiveVfoMode(VfoMode_e::VFO_MODE_LSB);
|
|
else
|
|
SetActiveVfoMode(VfoMode_e::VFO_MODE_USB);
|
|
response[0] = 0x00;
|
|
Serial.write(response, 1);
|
|
setFrequency(GetActiveVfoFreq());
|
|
//printLine2("cat: mode changed");
|
|
//updateDisplay();
|
|
break;
|
|
|
|
case 0x08: // PTT On
|
|
if (!globalSettings.txActive) {
|
|
response[0] = 0;
|
|
globalSettings.txCatActive = true;
|
|
startTx(TuningMode_e::TUNE_SSB);
|
|
updateDisplay();
|
|
} else {
|
|
response[0] = 0xf0;
|
|
}
|
|
Serial.write(response,1);
|
|
updateDisplay();
|
|
break;
|
|
|
|
case 0x88 : //PTT OFF
|
|
if (globalSettings.txActive) {
|
|
stopTx();
|
|
globalSettings.txCatActive = false;
|
|
}
|
|
response[0] = 0;
|
|
Serial.write(response,1);
|
|
updateDisplay();
|
|
break;
|
|
|
|
case 0x81:
|
|
//toggle the VFOs
|
|
response[0] = 0;
|
|
if (VFO_A == globalSettings.activeVfo)
|
|
switchVFO(VFO_B);
|
|
else
|
|
switchVFO(VFO_A);
|
|
//menuVfoToggle(1); // '1' forces it to change the VFO
|
|
Serial.write(response,1);
|
|
updateDisplay();
|
|
break;
|
|
|
|
case 0xBB: //Read FT-817 EEPROM Data (for comfirtable)
|
|
catReadEEPRom();
|
|
break;
|
|
|
|
case 0xe7 :
|
|
// get receiver status, we have hardcoded this as
|
|
//as we dont' support ctcss, etc.
|
|
response[0] = 0x09;
|
|
Serial.write(response,1);
|
|
break;
|
|
|
|
case 0xf7:
|
|
{
|
|
boolean isHighSWR = false;
|
|
boolean issplitOn = false;
|
|
|
|
/*
|
|
Inverted -> *ptt = ((p->tx_status & 0x80) == 0); <-- souce code in ft817.c (hamlib)
|
|
*/
|
|
response[0] = ((globalSettings.txActive ? 0 : 1) << 7) +
|
|
((isHighSWR ? 1 : 0) << 6) + //hi swr off / on
|
|
((issplitOn ? 1 : 0) << 5) + //Split on / off
|
|
(0 << 4) + //dummy data
|
|
0x08; //P0 meter data
|
|
|
|
Serial.write(response, 1);
|
|
}
|
|
break;
|
|
|
|
default:
|
|
//somehow, get this to print the four bytes
|
|
ultoa(*((unsigned long *)cmd), c, 16);
|
|
response[0] = 0x00;
|
|
Serial.write(response[0]);
|
|
}
|
|
|
|
insideCat = false;
|
|
}
|
|
|
|
int catCount = 0;
|
|
void checkCAT(){
|
|
byte i;
|
|
|
|
//Check Serial Port Buffer
|
|
if (Serial.available() == 0) { //Set Buffer Clear status
|
|
rxBufferCheckCount = 0;
|
|
return;
|
|
}
|
|
else if (Serial.available() < 5) { //First Arrived
|
|
if (rxBufferCheckCount == 0){
|
|
rxBufferCheckCount = Serial.available();
|
|
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
|
|
}
|
|
else if (rxBufferArriveTime < millis()){ //Clear Buffer
|
|
for (i = 0; i < Serial.available(); i++)
|
|
rxBufferCheckCount = Serial.read();
|
|
rxBufferCheckCount = 0;
|
|
}
|
|
else if (rxBufferCheckCount < Serial.available()){ // Increase buffer count, slow arrive
|
|
rxBufferCheckCount = Serial.available();
|
|
rxBufferArriveTime = millis() + CAT_RECEIVE_TIMEOUT; //Set time for timeout
|
|
}
|
|
return;
|
|
}
|
|
|
|
|
|
//Arived CAT DATA
|
|
for (i = 0; i < 5; i++)
|
|
cat[i] = Serial.read();
|
|
|
|
|
|
//this code is not re-entrant.
|
|
if (insideCat == 1)
|
|
return;
|
|
insideCat = 1;
|
|
|
|
/**
|
|
* This routine is enabled to debug the cat protocol
|
|
**/
|
|
catCount++;
|
|
|
|
/*
|
|
if (cat[4] != 0xf7 && cat[4] != 0xbb && cat[4] != 0x03){
|
|
sprintf(b, "%d %02x %02x%02x%02x%02x", catCount, cat[4],cat[0], cat[1], cat[2], cat[3]);
|
|
printLine2(b);
|
|
}
|
|
*/
|
|
|
|
/*
|
|
if (!doingCAT){
|
|
doingCAT = 1;
|
|
displayText("CAT on", 100,120,100,40, ILI9341_ORANGE, ILI9341_BLACK, ILI9341_WHITE);
|
|
}
|
|
*/
|
|
processCATCommand2(cat);
|
|
insideCat = 0;
|
|
}
|
|
|
|
|