50381da6de
Adjust keyer behavior to always run PTT button as if in KEYER_STRAIGHT mode
2020-12-13 18:19:13 -08:00
2c4448f6a0
Replace calls to the default Arduino Tone library to toneAC2, saving over 1024 bytes
2020-04-25 22:44:26 -07:00
67d34a3461
Update includes and pin names
2020-04-21 21:14:24 -07:00
b909f4d652
Remove active delay
2020-02-15 17:10:27 -08:00
bc5c39357f
Fix inter-element timing
2020-01-30 20:23:17 -08:00
8db6401bec
Remove delay entirely. active_delay delays 10ms even when asked for 0
2020-01-27 21:51:34 -08:00
e67885d8a0
disable delay before starting CW, allow straight key values through the paddle resistors, set correct timeout
2020-01-26 13:03:50 -08:00
6dd4b37d8a
analogRead technically returns an int, but it only can be 0-1023, so practically it's an unsigned int. This matches types for the constants. Also removed cwAdcSTFrom, since the value will always be greater than 0
2020-01-26 10:40:03 -08:00
39168d663e
Use settings in all files. Compiles, but untested
2020-01-03 23:11:55 -08:00
cda86a1b12
Refactored code
...
The files are not split into .cpp and .h files. The main file ubitxxxx.cpp will have the main routines to control the radio, initialization and main loop. The user interface is implemented in ubitx_ui.cpp, the code for setup/calibration routines is in setup.cpp. Nano gui, keyer, morse.cpp (morse reader) are all libaries that have minimum dependencies on each other.
2019-12-18 12:02:44 +05:30
reedbn
Reed Nightingale
Ashhar Farhan