odie/ubitxv6
1
0
Fork 0
mirror of https://codeberg.org/mclemens/ubitxv6.git synced 2024-11-13 02:45:57 -05:00
Code Issues Packages Projects Releases Wiki Activity

Replace 'byte' with 'uint8_t'

Browse Source
This commit is contained in:
Reed Nightingale 2020-05-03 14:48:11 -07:00
parent 4e961bdea7
commit e8c80a8304
1 changed files with 18 additions and 18 deletions
Show Stats Download Patch File Download Diff File Expand all files Collapse all files

36
ubitx_cat.cpp
View File

@ -16,7 +16,7 @@
*/
static unsigned long rxBufferArriveTime = 0;
static byte rxBufferCheckCount = 0;
static uint8_t rxBufferCheckCount = 0;
static uint8_t cat[5];//Data is ordered parameters 1-4, then command code last
enum CatDataIndex_e : uint8_t {
@ -27,7 +27,7 @@ enum CatDataIndex_e : uint8_t {
CMD = 4
};
static byte insideCat = 0;
static uint8_t insideCat = 0;
//for broken protocol
static const uint16_t CAT_RECEIVE_TIMEOUT = 500;
@ -46,32 +46,32 @@ static const uint8_t ACK = 0;
unsigned int skipTimeCount = 0;
byte setHighNibble(byte b,byte v) {
uint8_t setHighNibble(uint8_t b, uint8_t v) {
// Clear the high nibble
b &= 0x0f;
// Set the high nibble
return b | ((v & 0x0f) << 4);
}
byte setLowNibble(byte b,byte v) {
uint8_t setLowNibble(uint8_t b, uint8_t v) {
// Clear the low nibble
b &= 0xf0;
// Set the low nibble
return b | (v & 0x0f);
}
byte getHighNibble(byte b) {
uint8_t getHighNibble(uint8_t b) {
return (b >> 4) & 0x0f;
}
byte getLowNibble(byte b) {
uint8_t getLowNibble(uint8_t b) {
return b & 0x0f;
}
// Takes a number and produces the requested number of decimal digits, staring
// from the least significant digit.
//
void getDecimalDigits(unsigned long number,byte* result,int digits) {
void getDecimalDigits(unsigned long number, uint8_t* result,int digits) {
for (int i = 0; i < digits; i++) {
// "Mask off" (in a decimal sense) the LSD and return it
result[i] = number % 10;
@ -82,11 +82,11 @@ void getDecimalDigits(unsigned long number,byte* result,int digits) {
// Takes a frequency and writes it into the CAT command buffer in BCD form.
//
void writeFreq(unsigned long freq,byte* cmd) {
void writeFreq(unsigned long freq, uint8_t* cmd) {
// Convert the frequency to a set of decimal digits. We are taking 9 digits
// so that we can get up to 999 MHz. But the protocol doesn't care about the
// LSD (1's place), so we ignore that digit.
byte digits[9];
uint8_t digits[9];
getDecimalDigits(freq,digits,9);
// Start from the LSB and get each nibble
cmd[3] = setLowNibble(cmd[3],digits[1]);
@ -99,12 +99,12 @@ void writeFreq(unsigned long freq,byte* cmd) {
cmd[0] = setHighNibble(cmd[0],digits[8]);
}
// This function takes a frquency that is encoded using 4 bytes of BCD
// This function takes a frquency that is encoded using 4 uint8_ts of BCD
// representation and turns it into an long measured in Hz.
//
// [12][34][56][78] = 123.45678? Mhz
//
unsigned long readFreq(byte* cmd) {
unsigned long readFreq(uint8_t* cmd) {
// Pull off each of the digits
unsigned long ret = 0;
for(uint8_t i = 0; i < 4; ++i){
@ -117,12 +117,12 @@ unsigned long readFreq(byte* cmd) {
return ret*10;
}
//void ReadEEPRom_FT817(byte fromType)
//void ReadEEPRom_FT817(uint8_t fromType)
void catReadEEPRom(void)
{
//for remove warnings
byte temp0 = cat[P1];
byte temp1 = cat[P2];
uint8_t temp0 = cat[P1];
uint8_t temp1 = cat[P2];
cat[P1] = 0;
cat[P2] = 0;
@ -258,8 +258,8 @@ void catReadEEPRom(void)
Serial.write(cat, 2);
}
void processCATCommand2(byte* cmd) {
byte response[5];
void processCATCommand2(uint8_t* cmd) {
uint8_t response[5];
unsigned long f;
switch(cmd[4]){
@ -376,7 +376,7 @@ void processCATCommand2(byte* cmd) {
break;
default:
//somehow, get this to print the four bytes
//somehow, get this to print the four uint8_ts
ultoa(*((unsigned long *)cmd), c, 16);
response[0] = 0x00;
Serial.write(response[0]);
@ -387,7 +387,7 @@ void processCATCommand2(byte* cmd) {
int catCount = 0;
void checkCAT(){
byte i;
uint8_t i;
//Check Serial Port Buffer
if (Serial.available() == 0) { //Set Buffer Clear status