Adjust keyer behavior to always run PTT button as if in KEYER_STRAIGHT mode

This commit is contained in:
reedbn 2020-12-13 18:19:13 -08:00
parent b136f5e43c
commit 50381da6de

View File

@ -77,13 +77,8 @@ uint8_t keyerControl = 0;
//create by KD8CEC for compatible with new CW Logic //create by KD8CEC for compatible with new CW Logic
char update_PaddleLatch(bool isUpdateKeyState) { char update_PaddleLatch(bool isUpdateKeyState) {
unsigned char tmpKeyerControl = 0; unsigned char tmpKeyerControl = 0;
unsigned int paddle = analogRead(PIN_ANALOG_KEYER); unsigned int paddle = analogRead(PIN_ANALOG_KEYER);
if (paddle >= cwAdcDashFrom && paddle <= cwAdcDashTo)
//use the PTT as the key for tune up, quick QSOs
if (digitalRead(PIN_PTT) == 0)
tmpKeyerControl |= DIT_L;
else if (paddle >= cwAdcDashFrom && paddle <= cwAdcDashTo)
tmpKeyerControl |= DAH_L; tmpKeyerControl |= DAH_L;
else if (paddle >= cwAdcDotFrom && paddle <= cwAdcDotTo) else if (paddle >= cwAdcDotFrom && paddle <= cwAdcDotTo)
tmpKeyerControl |= DIT_L; tmpKeyerControl |= DIT_L;
@ -110,9 +105,41 @@ char update_PaddleLatch(bool isUpdateKeyState) {
******************************************************************************/ ******************************************************************************/
void cwKeyer(void){ void cwKeyer(void){
bool continue_loop = true; bool continue_loop = true;
unsigned tmpKeyControl = 0; char tmpKeyControl = 0;
if(KeyerMode_e::KEYER_STRAIGHT != globalSettings.keyerMode){ if((KeyerMode_e::KEYER_STRAIGHT == globalSettings.keyerMode)
|| (digitalRead(PIN_PTT) == 0)){//use the PTT as the key for tune up, quick QSOs
while(1){
tmpKeyControl = update_PaddleLatch(0) | (digitalRead(PIN_PTT)?0:DIT_L);
//Serial.println((int)tmpKeyControl);
if ((tmpKeyControl & DIT_L) == DIT_L) {
// if we are here, it is only because the key is pressed
if (!globalSettings.txActive){
startTx(TuningMode_e::TUNE_CW);
globalSettings.cwExpirationTimeMs = millis() + globalSettings.cwActiveTimeoutMs;
}
cwKeydown();
while ( tmpKeyControl & DIT_L == DIT_L){
tmpKeyControl = update_PaddleLatch(0) | (digitalRead(PIN_PTT)?0:DIT_L);
//Serial.println((int)tmpKeyControl);
}
cwKeyUp();
}
else{
if (0 < globalSettings.cwExpirationTimeMs && globalSettings.cwExpirationTimeMs < millis()){
globalSettings.cwExpirationTimeMs = 0;
stopTx();
}
return;//Tx stop control by Main Loop
}
checkCAT();
} //end of while
}
else{//KEYER_IAMBIC_*
while(continue_loop){ while(continue_loop){
switch(keyerState){ switch(keyerState){
case IDLE: case IDLE:
@ -193,34 +220,7 @@ void cwKeyer(void){
checkCAT(); checkCAT();
} //end of while } //end of while
} }//end of KEYER_IAMBIC_*
else{//KEYER_STRAIGHT
while(1){
char state = update_PaddleLatch(0);
// Serial.println((int)state);
if (state == DIT_L) {
// if we are here, it is only because the key is pressed
if (!globalSettings.txActive){
startTx(TuningMode_e::TUNE_CW);
globalSettings.cwExpirationTimeMs = millis() + globalSettings.cwActiveTimeoutMs;
}
cwKeydown();
while ( update_PaddleLatch(0) == DIT_L );
cwKeyUp();
}
else{
if (0 < globalSettings.cwExpirationTimeMs && globalSettings.cwExpirationTimeMs < millis()){
globalSettings.cwExpirationTimeMs = 0;
stopTx();
}
return;//Tx stop control by Main Loop
}
checkCAT();
} //end of while
}//end of else KEYER_STRAIGHT
} }