odie/ubitxv6
1
0
Fork 0
mirror of https://codeberg.org/mclemens/ubitxv6.git synced 2025-02-21 06:57:27 -05:00
Code Issues Packages Projects Releases Wiki Activity

Give 0xBB a name

Browse Source
This commit is contained in:
Reed Nightingale 2020-05-03 23:54:38 -07:00
parent ce0fac95fe
commit 2e74193d93
1 changed files with 5 additions and 2 deletions

7
ubitx_cat.cpp

@ -51,6 +51,8 @@ enum Ft817Command_e : uint8_t {
ReadFreqAndMode = 0x03,//Returns current frequency (BCD, 4 bytes), then mode (OperatingMode_e)
PowerOn = 0x0F,
PowerOff = PowerOn | OffBit,
//Unofficial commands
ReadEeprom = 0xBB,
};
enum OperatingMode_e : uint8_t {
@ -96,6 +98,7 @@ struct ReadTxStatus_t {
};
//Values based on http://www.ka7oei.com/ft817_memmap.html
//hamlib likes to read addresses 0x0064 and 0x007A, but including support for some others
enum Ft817Eeprom_e : uint16_t {
VfoAndBankSelect = 0x0055,
TuningModes = 0x0057,
@ -213,7 +216,6 @@ void catGetEeprom(const uint16_t read_address, uint8_t* response)
//3-0 : CW Pitch (300-1000 Hz) (#20) From 0 to E (HEX) with 0 = 300 Hz and each step representing 50 Hz
//5-4 : Lock Mode (#32) 00 = Dial, 01 = Freq, 10 = Panel
//7-6 : Op Filter (#38) 00 = Off, 01 = SSB, 10 = CW
//CAT_BUFF[0] = 0x08;
*response = (globalSettings.cwSideToneFreq - 300)/50;
break;
case Ft817Eeprom_e::SidetoneVolume:
@ -348,7 +350,7 @@ void processCatCommand(uint8_t* cmd) {
updateDisplay();
break;
case 0xBB: //Read FT-817 EEPROM Data (for comfirtable)
case Ft817Command_e::ReadEeprom:
catReadEEPRom(cmd,response);
response_length = 2;
break;
@ -392,6 +394,7 @@ void checkCAT(){
static uint8_t rx_buffer[FT817_MESSAGE_SIZE];
static uint8_t current_index = 0;
static uint32_t timeout = 0;
//Check Serial Port Buffer
if (Serial.available() == 0) { //Set Buffer Clear status
if(timeout < millis()){