mirror of
https://codeberg.org/mclemens/hl2-interface.git
synced 2024-12-22 07:36:33 -05:00
„hl2-interface.ino“ ändern
This commit is contained in:
Michael Clemens // DK1MI
parent
c64e5954ba
commit
4e7726a843
@ -1,257 +1,65 @@
|
||||
//***************************************************************************************
|
||||
//* PA70 Controller - Band, and Fan Control by Temperature for Arduino Nano *
|
||||
//* To be used together with Hermes Lite v2 (http://www.hermeslite.com/) *
|
||||
//* by Cesc Gudayol (EA3IGT) *
|
||||
//* Version 3.0.1 01/04/2021 *
|
||||
//* Hermes Lite 2 Interface Box *
|
||||
//* *
|
||||
//* Reads I2C data from the Hermes Lite 2 and a) controls an antenna switch based *
|
||||
//* on the selected band and b) sets the correct LPF of the Hardrock 50 Power Amp *
|
||||
//* *
|
||||
//* Based on HL2-PA70 by Cesc Gudayol (EA3IGT) Version 3.0.1 from 01/04/2021 *
|
||||
//* More info at: https://github.com/ea3igt/HL2-PA70 *
|
||||
//* *
|
||||
//* Adapted by Michael Clemens (DK1MI) *
|
||||
//* *
|
||||
//***************************************************************************************
|
||||
//* THE SOFTWARE IS PROVIDED “AS IS”, WITHOUT WARRANTY OF ANY KIND *
|
||||
//***************************************************************************************
|
||||
//* v2.0 * 24/10/2020 * Initial version *
|
||||
//* v2.1 * 27/10/2020 * Convert sendOled to a function to refresh the OLED display *
|
||||
//* V2.2 * 25/11/2020 * Store last band selected in EPROM *
|
||||
//* * 12/12/2020 * Get 6 least significative I2C bus bits to select the band *
|
||||
//* V2.3 * 14/12/2020 * Use EXTTR to control PTT status *
|
||||
//* V3.0 * 20/02/2021 * First version to test new Control Board v2.1 *
|
||||
//* V3.0.1 * 01/04/2021 * Correct OLED refresh problems *
|
||||
//***************************************************************************************
|
||||
//
|
||||
// Pin Configuration:
|
||||
// - PIN A00 OUTPUT: SCL for I2C Master (OLED display)
|
||||
// - PIN A01 OUTPUT: SDA for I2C Master (OLED display)
|
||||
// - PIN A04 INPUT: SDA for I2C Slave (Hermes Lite 2 Control bus)
|
||||
// - PIN A05 INPUT: SCL for I2C Slave (Hermes Lite 2 Control bus)
|
||||
// - PIN A03 INPUT: NTC divider voltage
|
||||
// - PIN D02 INPUT: EXTTR (PTT) control from Hermes Lite 2
|
||||
// - PIN D03 OUTPUT: LPF Band 1 Control (80m)
|
||||
// - PIN D04 OUTPUT: LPF Band 2 Control (40/60m)
|
||||
// - PIN D05 OUTPUT: LPF Band 3 Control (30/20m)
|
||||
// - PIN D06 OUTPUT: LPF Band 4 Control (17/15/12/10m)
|
||||
// - PIN D07 LPF Spare
|
||||
// - PIN D08 LPF Spare
|
||||
// - PIN D09 LPF Spare
|
||||
// - PIN D10 LPF Spare -> Antenna Switch
|
||||
// - PIN D11 OUTPUT: PWM for Fan control f(Temp)
|
||||
// - PIN D12 OUTPUT: PTT Control to the Power Amp
|
||||
// - PIN D10 OUTPUT: Antenna Switch
|
||||
|
||||
#include <Wire.h> //For I2C control
|
||||
#include <U8g2lib.h> //For SSD1306 Chip Control (OLED)
|
||||
#include <EEPROM.h> //To store values from PA70-Controller
|
||||
#include <util/delay.h> //Library to delay inside one Interrupt
|
||||
|
||||
//#define TEST //Uncomment if Testing (Serial Monitor traces)
|
||||
|
||||
// Declaration for an SH1106 display connected to I2C
|
||||
// U8G2_RX: Rotation (R0 = 0º | R1 = 90º | R2 = 180º | R3 = 270º | MIRROR)
|
||||
// SW SCL pin A0
|
||||
// SW SDA pin A1
|
||||
// Use U8X8_PIN_NONE if the reset pin is not connected (All Boards without Reset of the Display)
|
||||
U8G2_SH1106_128X64_NONAME_2_SW_I2C u8g2(U8G2_R0, A0, A1, U8X8_PIN_NONE);
|
||||
|
||||
// Declaration for the Hermes Lites v2 I2C (Listen to Adress 0x20)
|
||||
// HW SDA pin A4
|
||||
// HW SCL pin A5
|
||||
|
||||
// Thermometer definitions
|
||||
int ThermistorPin = 3; //Pin A3 for NTC voltage divider reading
|
||||
int Vo; //To store thermistor bridge readings
|
||||
float R1 = 10000; //Adjust to the R value for the divider (About 10K Ohm)
|
||||
float logR2, R2, T;
|
||||
float c1 = 1.009249522e-03, c2 = 2.378405444e-04, c3 = 2.019202697e-07;
|
||||
|
||||
// PWM definitions
|
||||
const byte PWM_Pin = 11; //PWM Pin
|
||||
|
||||
// LPF Output Pins (D3..D10 pins can be used)
|
||||
#define LPF_band1 3 //Pin D3
|
||||
#define LPF_band2 4 //Pin D4
|
||||
#define LPF_band3 5 //Pin D5
|
||||
#define LPF_band4 6 //Pin D6
|
||||
|
||||
#define Antenna 19 //Pin D10
|
||||
|
||||
// PTT Control
|
||||
#define EXTTR 2 //Pin D2
|
||||
#define PTTpin 12 //Pin D12
|
||||
#define Antenna 10 //Pin D10
|
||||
|
||||
// Other Configurations
|
||||
float initialTempFanActivation = 27; //Minimum temperature for Fan Activation
|
||||
float tempFanActivation; //to implement the histeresis cycle
|
||||
float previousTemp_fanActivation; //to implement the histeresis cycle
|
||||
bool fanConnected = false; //to store if Fan is activated to show on OLED
|
||||
String myBand="---"; //to store myBand String
|
||||
float myTemp; //to store Temperature read from NTC
|
||||
byte selectedBand; //to store Selected Band
|
||||
byte previousSelectedBand; //to store previously Selected Band
|
||||
byte previousI2CBand; //to store previously I2C Band decoded
|
||||
byte PTTStatus = 0; //to store global PTT Status
|
||||
bool PTTChanged = false; //to store global PTT Status Changed
|
||||
int selected_antenna = 0;
|
||||
|
||||
// SetUp function initializations
|
||||
void setup() {
|
||||
#ifdef TEST
|
||||
Serial.begin(9600);
|
||||
#endif
|
||||
|
||||
// U8G2 Display initialization
|
||||
u8g2.begin();
|
||||
u8g2.setFont(u8g2_font_helvB12_tr);
|
||||
u8g2.firstPage();
|
||||
do {
|
||||
u8g2.drawStr(5,25,"PA70 Ctrl v3.0.1"); //Software version
|
||||
u8g2.drawStr(5,53," EA3IGT"); //Change to whatever you want
|
||||
} while ( u8g2.nextPage() );
|
||||
|
||||
// I2C Slave Setup
|
||||
Wire.begin(0x20); // join i2c bus with address to listen
|
||||
Wire.onReceive(receiveEvent); // register event
|
||||
|
||||
// Fan Setup
|
||||
tempFanActivation = initialTempFanActivation;
|
||||
previousTemp_fanActivation = tempFanActivation;
|
||||
|
||||
// LPF Setup
|
||||
pinMode(LPF_band1, OUTPUT);
|
||||
pinMode(LPF_band2, OUTPUT);
|
||||
pinMode(LPF_band3, OUTPUT);
|
||||
pinMode(LPF_band4, OUTPUT);
|
||||
|
||||
// Antenna
|
||||
pinMode(Antenna, OUTPUT);
|
||||
|
||||
// OLED Setup
|
||||
pinMode(A0,OUTPUT);
|
||||
pinMode(A1,OUTPUT);
|
||||
|
||||
// PTT Setup
|
||||
pinMode(PTTpin,OUTPUT);
|
||||
pinMode(EXTTR,INPUT);
|
||||
|
||||
// PWM Setup
|
||||
pinMode(PWM_Pin,OUTPUT);
|
||||
|
||||
delay(200);
|
||||
|
||||
//Listen to EXTTR status change
|
||||
attachInterrupt(digitalPinToInterrupt(EXTTR),changePTT,CHANGE);
|
||||
|
||||
//Get stored Band from EEPROM for initial filter selection
|
||||
previousSelectedBand=EEPROM.read(0); //Read LPF filter Band from EEPROM byte 0
|
||||
previousI2CBand=EEPROM.read(1); //Read I2C byte Band from EEPROM byte 1
|
||||
|
||||
#ifdef TEST
|
||||
Serial.print(F("*** Previous I2C Band: "));
|
||||
Serial.println(previousI2CBand);
|
||||
Serial.print(F("*** Previous Selected Band: "));
|
||||
Serial.println(previousSelectedBand);
|
||||
Serial.println(F("Initializing..."));
|
||||
Serial.println();
|
||||
#endif
|
||||
|
||||
decodeBand(previousI2CBand);
|
||||
setLpfBand(previousSelectedBand); //Select LPF filter
|
||||
|
||||
delay(2000); //Delay to show the Logo & Version
|
||||
sendOled(); //Refresh OLED
|
||||
}
|
||||
|
||||
// Main loop program
|
||||
void loop()
|
||||
{
|
||||
int PWMDuty;
|
||||
int Times = 100; //Average N times to be more stable
|
||||
float Temperature = 0; //All thermometer code from: https://bit.ly/3pOUjVo
|
||||
for(int i = 0; i < Times; i++) {
|
||||
Vo = analogRead(ThermistorPin);
|
||||
R2 = R1 * (1024.0 / (float)Vo - 1.0);
|
||||
logR2 = log(R2);
|
||||
T = (1.0 / (c1 + c2*logR2 + c3*logR2*logR2*logR2));
|
||||
T = T - 273.15 + 1; //+1 is my personal adjustment to be more precise
|
||||
Temperature = Temperature + T;
|
||||
if (PTTChanged)
|
||||
{
|
||||
digitalWrite(PTTpin,PTTStatus); //Toggle PTT
|
||||
PTTChanged=false; //Reset PTTChanged
|
||||
}
|
||||
}
|
||||
myTemp = int(Temperature/Times*10)/(float)10.0; //Rounded to get 1 decimal
|
||||
|
||||
PWMDuty = int((myTemp - tempFanActivation)*20); //Calculate PWMDuty (increase to get more aggresive fan)
|
||||
if (PWMDuty < 0)
|
||||
{
|
||||
PWMDuty = 0;
|
||||
}
|
||||
if (PWMDuty > 254)
|
||||
{
|
||||
PWMDuty = 254;
|
||||
}
|
||||
|
||||
#ifdef TEST
|
||||
Serial.print(F("Temperature: "));
|
||||
Serial.print(myTemp,1);
|
||||
Serial.print(F(" - PWMDuty: "));
|
||||
Serial.println(PWMDuty);
|
||||
#endif
|
||||
|
||||
analogWrite(PWM_Pin,PWMDuty); //Select the appropriate PWM f(temperature)
|
||||
|
||||
if (PWMDuty > 0 and not(fanConnected)) //Implement histeresis cycle
|
||||
{
|
||||
tempFanActivation = initialTempFanActivation - 1;
|
||||
}
|
||||
if (PWMDuty == 0 and fanConnected)
|
||||
{
|
||||
tempFanActivation = initialTempFanActivation;
|
||||
}
|
||||
|
||||
if (PWMDuty > 0)
|
||||
{
|
||||
fanConnected=true;
|
||||
}
|
||||
else
|
||||
{
|
||||
fanConnected=false;
|
||||
}
|
||||
|
||||
#ifdef TEST
|
||||
if (fanConnected)
|
||||
{
|
||||
Serial.println(F("Fan Connected"));
|
||||
Serial.print(F("Minimum Temperature Fan Deactivation: "));
|
||||
Serial.println(tempFanActivation,1);
|
||||
}
|
||||
else
|
||||
{
|
||||
Serial.println(F("Fan Disconnected"));
|
||||
Serial.print(F("Minimum Temperature Fan Activation: "));
|
||||
Serial.println(tempFanActivation,1);
|
||||
}
|
||||
Serial.print(F("BAND:"));
|
||||
Serial.println(myBand);
|
||||
Serial.println();
|
||||
#endif
|
||||
|
||||
sendOled(); //Refresh OLED
|
||||
// do nothing
|
||||
}
|
||||
|
||||
//Interrupt function to handle any PTT change at HL2 (EXTTR signal)
|
||||
void changePTT()
|
||||
{
|
||||
int myEXTTR = digitalRead(EXTTR);
|
||||
PTTStatus = not(myEXTTR);
|
||||
PTTChanged = true;
|
||||
|
||||
#ifdef TEST
|
||||
Serial.println(F("*** EXTTR Changed ***"));
|
||||
Serial.print(F("Value="));
|
||||
Serial.println(myEXTTR);
|
||||
Serial.print(F("PTTStatus="));
|
||||
Serial.println(PTTStatus);
|
||||
#endif
|
||||
}
|
||||
|
||||
void receiveEvent(int howMany) { //Triggered when receive I2C information from HL2
|
||||
byte c[10];
|
||||
@ -267,32 +75,15 @@ void receiveEvent(int howMany) { //Triggered when receive I2C information f
|
||||
#endif
|
||||
|
||||
byte myC=c[1] & B00111111; //Get 6 least significative bits
|
||||
|
||||
decodeBand(myC); //Decode Band
|
||||
|
||||
// write to LPF "Binary Bus" (Band Selection)
|
||||
setLpfBand(selectedBand);
|
||||
if ((selectedBand!=previousSelectedBand) and (PTTStatus==1))
|
||||
{
|
||||
#ifdef TEST
|
||||
// write to usb monitor
|
||||
Serial.println(F("*** Change Filter: Delay 50 ms ***"));
|
||||
#endif
|
||||
_delay_ms(50); //Delay 50ms to settle LPF filters (if change) before PTT
|
||||
}
|
||||
previousSelectedBand = selectedBand;
|
||||
|
||||
// Toggle PTT
|
||||
digitalWrite(PTTpin,PTTStatus);
|
||||
|
||||
// toggle Antenna
|
||||
digitalWrite(Antenna,selected_antenna);
|
||||
|
||||
//Store Last Selected Band into EEPROM
|
||||
if (PTTStatus)
|
||||
{
|
||||
EEPROM.write(0,selectedBand); //Byte 0 for selectedBand
|
||||
EEPROM.write(1,myC); //Byte 1 for I2C decoded
|
||||
}
|
||||
EEPROM.write(1,myC); //Byte 1 for I2C decoded
|
||||
|
||||
|
||||
#ifdef TEST
|
||||
// write to usb monitor
|
||||
@ -303,86 +94,38 @@ void receiveEvent(int howMany) { //Triggered when receive I2C information f
|
||||
#endif
|
||||
}
|
||||
|
||||
//Function to activate the appropriate filter band at LPF
|
||||
//***************** Change accordingly ******************
|
||||
void setLpfBand(int lpfBand)
|
||||
{
|
||||
// write to LPF "Binary Bus" (Band Selection)
|
||||
digitalWrite(LPF_band1, lpfBand & B0001);
|
||||
digitalWrite(LPF_band2, lpfBand & B0010);
|
||||
digitalWrite(LPF_band3, lpfBand & B0100);
|
||||
digitalWrite(LPF_band4, lpfBand & B1000);
|
||||
}
|
||||
|
||||
//Function to decode HL2 band and select/map the filter
|
||||
//**************** Change accordingly *****************
|
||||
void decodeBand(byte c)
|
||||
{
|
||||
switch (c) {
|
||||
case 0x1: //160m
|
||||
selectedBand = B0001;
|
||||
myBand = F("160m");
|
||||
selected_antenna = 0;
|
||||
Serial.println("HRBN10;"); // sets the Hardrock-50 to 160m
|
||||
break;
|
||||
case 0x2: //80m
|
||||
selectedBand = B0001;
|
||||
myBand = F("80m");
|
||||
selected_antenna = 0;
|
||||
Serial.println("HRBN9;"); // sets the Hardrock-50 to 80m
|
||||
break;
|
||||
case 0x4: //60m & 40m
|
||||
selectedBand = B0010;
|
||||
myBand = F("60/40m");
|
||||
selected_antenna = 0;
|
||||
Serial.println("HRBN7;"); // sets the Hardrock-50 to 40m
|
||||
break;
|
||||
case 0x8: //30m & 20m
|
||||
selectedBand = B0100;
|
||||
myBand = F("30/20m");
|
||||
selected_antenna = 1;
|
||||
Serial.println("HRBN5;"); // sets the Hardrock-50 to 20m
|
||||
break;
|
||||
case 0x10: //17m & 15m
|
||||
selectedBand = B1000;
|
||||
myBand = F("17/15m");
|
||||
selected_antenna = 1;
|
||||
Serial.println("HRBN3;"); // sets the Hardrock-50 to 15m
|
||||
break;
|
||||
case 0x20: //12m & 10m
|
||||
selectedBand = B1000;
|
||||
myBand = F("12/10m");
|
||||
selected_antenna = 1;
|
||||
break;
|
||||
default:
|
||||
selectedBand=selectedBand; //No Change
|
||||
Serial.println("HRBN1;"); // sets the Hardrock-50 to 10m
|
||||
break;
|
||||
case 0x00: //6m
|
||||
selected_antenna = 1;
|
||||
Serial.println("HRBN0;"); // sets the Hardrock-50 to 6m
|
||||
break;
|
||||
}
|
||||
}
|
||||
|
||||
//Function to send all the information to the OLED
|
||||
void sendOled(void)
|
||||
{
|
||||
// write to OLED
|
||||
//u8g2.clearBuffer();
|
||||
u8g2.firstPage();
|
||||
do {
|
||||
// u8g2.drawFrame(0,0,128,64);
|
||||
u8g2.setFont(u8g2_font_t0_17_tr);
|
||||
u8g2.drawStr(5,17,"BAND:");
|
||||
|
||||
u8g2.drawStr(55,17,myBand.c_str());
|
||||
u8g2.drawStr(5,37,"TEMP:");
|
||||
String myTempStr=String(myTemp,1);
|
||||
u8g2.drawStr(55,37,myTempStr.c_str());
|
||||
if (fanConnected)
|
||||
{
|
||||
//u8g2.drawStr(97,37,"#");
|
||||
u8g2.setFont(u8g2_font_open_iconic_all_2x_t);
|
||||
u8g2.drawStr(96,39,"\xcd");
|
||||
}
|
||||
else
|
||||
{
|
||||
u8g2.drawStr(97,36,"_");
|
||||
}
|
||||
u8g2.setFont(u8g2_font_t0_17_tr);
|
||||
String a = "Antenna: " + String(selected_antenna);
|
||||
u8g2.drawStr(5,57,a.c_str()); //Space for future uses
|
||||
delay(2);
|
||||
} while ( u8g2.nextPage() );
|
||||
u8g2.sendBuffer();
|
||||
}
|
||||
}
|
||||
Loading…
Reference in New Issue
Block a user