cruxports/mpd/mpd.conf.5

232 lines
9.3 KiB
Groff
Raw Normal View History

2022-02-05 15:39:19 -05:00
.TH mpd.conf 5
.SH NAME
mpd.conf \- Music Player Daemon configuration file
.SH DESCRIPTION
\fBmpd.conf\fP is the configuration file for mpd(1). If not specified on the
command line, MPD first searches for it at \fB$XDG_CONFIG_HOME/mpd/mpd.conf\fP
then at \fB~/.mpdconf\fP then at \fB~/.mpd/mpd.conf\fP and then in
\fB/etc/mpd.conf\fP.
Lines beginning with a "#" character are comments. All other non-empty lines
specify parameters and their values. These lines contain the parameter name
and parameter value (surrounded by double quotes) separated by whitespace
(either tabs or spaces). For example:
parameter "value"
The exceptions to this rule are the parameters for input plugins, decoders, databases, and
audio_output, which are of the form:
audio_output {
.br
parameter1 "value"
parameter2 "value"
.br
}
Input and decoder plugins always have the parameter \fIenabled\fP, which accepts the
possible values "yes" or "no", and the parameter \fIplugin\fP, which gives the name of
the plugin. Each such plugin has its own documentation in the online user manual, listing
additional parameters that can affect the behavior of the decoder.
Parameters that take a file or directory as an argument should use absolute
paths.
See \fB/etc/mpd/mpdconf.example\fP for an example configuration file.
This manual is not complete, it lists only the most important options.
Please read the MPD user manual for a complete configuration guide:
<\fBhttp://www.musicpd.org/doc/user/\fP>
.SH REQUIRED PARAMETERS
.TP
.B db_file <file>
This specifies where the db file will be stored.
.TP
.B log_file <file>
This specifies where the log file should be located.
The special value "syslog" makes MPD use the local syslog daemon.
.SH OPTIONAL PARAMETERS
.TP
.B sticker_file <file>
The location of the sticker database. This is a database which
manages dynamic information attached to songs.
.TP
.B pid_file <file>
This specifies the file to save mpd's process ID in.
.TP
.B music_directory <directory>
This specifies the directory where music is located.
If you do not configure this, you can only play streams.
.TP
.B playlist_directory <directory>
This specifies the directory where saved playlists are stored.
If you do not configure this, you cannot save playlists.
.TP
.B state_file <file>
This specifies if a state file is used and where it is located. The state of
mpd will be saved to this file when mpd is terminated by a TERM signal or by
the "kill" command. When mpd is restarted, it will read the state file and
restore the state of mpd (including the playlist).
.TP
.B restore_paused <yes or no>
Put MPD into pause mode instead of starting playback after startup.
.TP
.B user <username>
This specifies the user that MPD will run as, if set. MPD should
never run as root, and you may use this option to make MPD change its
user id after initialization. Do not use this option if you start MPD
as an unprivileged user.
.TP
.B port <port>
This specifies the port that mpd listens on. The default is 6600.
.TP
.B log_level <default, secure, or verbose>
This specifies how verbose logs are. "default" is minimal logging, "secure"
reports from what address a connection is opened, and when it is closed, and
"verbose" records excessive amounts of information for debugging purposes. The
default is "default".
.TP
.B follow_outside_symlinks <yes or no>
Control if MPD will follow symbolic links pointing outside the music dir.
You must recreate the database after changing this option.
The default is "yes".
.TP
.B follow_inside_symlinks <yes or no>
Control if MPD will follow symbolic links pointing inside the music dir,
potentially adding duplicates to the database.
You must recreate the database after changing this option.
The default is "yes".
.TP
.B zeroconf_enabled <yes or no>
If yes, and MPD has been compiled with support for Avahi or Bonjour, service
information will be published with Zeroconf. The default is yes.
.TP
.B zeroconf_name <name>
If Zeroconf is enabled, this is the service name to publish. This name should
be unique to your local network, but name collisions will be properly dealt
with. The default is "Music Player @ %h", where %h will be replaced with the
hostname of the machine running MPD.
.TP
.B audio_output
See \fBDESCRIPTION\fP and the various \fBAUDIO OUTPUT PARAMETERS\fP sections
for the format of this parameter. Multiple audio_output sections may be
specified. If no audio_output section is specified, then MPD will scan for a
usable audio output.
.TP
.B replaygain <off or album or track or auto>
If specified, mpd will adjust the volume of songs played using ReplayGain tags
(see <\fBhttp://www.replaygain.org/\fP>). Setting this to "album" will adjust
volume using the album's ReplayGain tags, while setting it to "track" will
adjust it using the track ReplayGain tags. "auto" uses the track ReplayGain
tags if random play is activated otherwise the album ReplayGain tags. Currently
only FLAC, Ogg Vorbis, Musepack, and MP3 (through ID3v2 ReplayGain tags, not
APEv2) are supported.
.TP
.B replaygain_preamp <\-15 to 15>
This is the gain (in dB) applied to songs with ReplayGain tags.
.TP
.B volume_normalization <yes or no>
If yes, mpd will normalize the volume of songs as they play. The default is no.
.TP
.B filesystem_charset <charset>
This specifies the character set used for the filesystem. A list of supported
character sets can be obtained by running "iconv \-l". The default is
determined from the locale when the db was originally created.
.TP
.B save_absolute_paths_in_playlists <yes or no>
This specifies whether relative or absolute paths for song filenames are used
when saving playlists. The default is "no".
.TP
.B auto_update <yes or no>
This specifies the whether to support automatic update of music database when
files are changed in music_directory. The default is to disable autoupdate
of database.
.TP
.B auto_update_depth <N>
Limit the depth of the directories being watched, 0 means only watch
the music directory itself. There is no limit by default.
.TP
.SH REQUIRED AUDIO OUTPUT PARAMETERS
.TP
.B type <type>
This specifies the audio output type. See the list of supported outputs in mpd
\-\-version for possible values.
.TP
.B name <name>
This specifies a unique name for the audio output.
.SH OPTIONAL AUDIO OUTPUT PARAMETERS
.TP
.B format <sample_rate:bits:channels>
This specifies the sample rate, bits per sample, and number of channels of
audio that is sent to the audio output device. See documentation for the
\fBaudio_output_format\fP parameter for more details. The default is to use
whatever audio format is passed to the audio output.
Any of the three attributes may be an asterisk to specify that this
attribute should not be enforced
.TP
.B replay_gain_handler <software, mixer or none>
Specifies how replay gain is applied. The default is "software",
which uses an internal software volume control. "mixer" uses the
configured (hardware) mixer control. "none" disables replay gain on
this audio output.
.SH OPTIONAL ALSA OUTPUT PARAMETERS
.TP
.B device <dev>
This specifies the device to use for audio output. The default is "default".
.TP
.B mixer_type <hardware, software or none>
Specifies which mixer should be used for this audio output: the
hardware mixer (available for ALSA, OSS and PulseAudio), the software
mixer or no mixer ("none"). By default, the hardware mixer is used
for devices which support it, and none for the others.
.TP
.B mixer_device <mixer dev>
This specifies which mixer to use. The default is "default". To use
the second sound card in a system, use "hw:1".
.TP
.B mixer_control <mixer ctrl>
This specifies which mixer control to use (sometimes referred to as
the "device"). The default is "PCM". Use "amixer scontrols" to see
the list of possible controls.
.TP
.B mixer_index <mixer index>
A number identifying the index of the named mixer control. This is
probably only useful if your alsa device has more than one
identically\-named mixer control. The default is "0". Use "amixer
scontrols" to see the list of controls with their indexes.
.TP
.B auto_resample <yes or no>
Setting this to "no" disables ALSA's software resampling, if the
hardware does not support a specific sample rate. This lets MPD do
the resampling. "yes" is the default and allows ALSA to resample.
.TP
.B auto_channels <yes or no>
Setting this to "no" disables ALSA's channel conversion, if the
hardware does not support a specific number of channels. Default: "yes".
.TP
.B auto_format <yes or no>
Setting this to "no" disables ALSA's sample format conversion, if the
hardware does not support a specific sample format. Default: "yes".
.TP
.B buffer_time <time in microseconds>
This sets the length of the hardware sample buffer in microseconds. Increasing
it may help to reduce or eliminate skipping on certain setups. Most users do
not need to change this. The default is 500000 microseconds (0.5 seconds).
.TP
.B period_time <time in microseconds>
This sets the time between hardware sample transfers in microseconds.
Increasing this can reduce CPU usage while lowering it can reduce underrun
errors on bandwidth-limited devices. Some users have reported good results
with this set to 50000, but not all devices support values this high. Most
users do not need to change this. The default is 256000000 / sample_rate(kHz),
or 5804 microseconds for CD-quality audio.
.SH FILES
.TP
.BI ~/.mpdconf
User configuration file.
.TP
.BI /etc/mpd.conf
Global configuration file.
.SH SEE ALSO
mpd(1), mpc(1)