Previously, if you wrote (device "my-label") without (title 'label),
you'd get:
guix system: error: stat: No such file or directory: "my-label"
Now you get a proper error and a hint.
Reported by Pierre-Antoine Rouby.
* guix/scripts/system.scm (check-file-system-availability)[literal]: New
variable. Loop over LITERAL.
* gnu/system/file-systems.scm (%pseudo-file-system-types): New variable.
* guix/ui.scm (display-hint): Make public.
The previous method would mess up with @example formatting, for
instance.
* guix/ui.scm (display-hint): Parameterize '%text-width' instead of
using 'fill-paragraph'.
Previously, if ~/.cache was not write-accessible, 'guix' would exit with
code 1 without printing any message. That was because the 'make-stack'
call would fail since the exception (a 'system-error) came from
'compile-file', which was called at a point where TAG wasn't installed
yet. Secondly, to mimick auto-compilation behavior, we just swallow
'system-error raised by 'compile-file'.
Reported by Clément Lassieur.
* guix/ui.scm (load*): Move 'compile-file' call in the dynamic extent of
TAG. Catch 'system-error around it and ignore it.
Mitigates <https://bugs.gnu.org/29881>.
Reported by Diego Nicola Barbato <dnbarbato@posteo.de>.
* guix/ui.scm (load*): Unset '%fresh-auto-compile' only on Guile 2.2.3.
Fixes <https://bugs.gnu.org/29255>.
Reported by Ben Sturmfels <ben@sturm.com.au>.
* guix/ui.scm (display-collision-resolution-hint): New procedure.
(call-with-error-handling): Call it upon '&profile-collistion-error'.
* guix/scripts/offload.scm (build-machines): Comment out
'(set! %fresh-auto-compile #t)' since with Guile 2.2.3 it could lead to
an actual rebuild of everything that gets loaded from there on. See
<https://bugs.gnu.org/29226>.
* guix/ui.scm (load*): Likewise.
Fixes <https://bugs.gnu.org/29358>.
Reported by Marius Bakke <mbakke@fastmail.com>.
* guix/ui.scm (known-variable-definition): Add 'visited' set to guard
against cycles on 2.0.
Suggested by Ricardo Wurmus.
Works around <https://bugs.gnu.org/28295>.
* guix/ui.scm (report-load-error): Add case for 'read-error'.
* tests/guix-system.sh: Test missing-closing-paren errors.
* guix/store.scm (%rpc-calls): New variable.
(show-rpc-profile, record-operation): New procedures.
(operation): Add call to 'record-operation'.
* guix/ui.scm (run-guix-command): Wrap COMMAND-MAIN in 'dynamic-wind'.
Run EXIT-HOOK.
* guix/derivations.scm (derivation-prerequisites-to-build): Rename
#:substitutable? to #:substitutable-info.
[derivation-substitutable?]: Rename to...
[derivation-substitutable-info]: ... this. Return a list of <substitutable>.
Second return value is now a list of <substitutable> instead of a list
of strings.
* guix/ui.scm (show-what-to-build)[substitutable?]: Rename to...
[substitutable-info]: ... this.
Adjust to new 'derivation-prerequisites-to-build' return value type.
* tests/derivations.scm ("derivation-prerequisites-to-build and
substitutes"): Adjust.
("derivation-prerequisites-to-build and substitutes, local build"):
Likewise.
This fixes runs of 'guix package' and 'guix system' tests in
environments where $HOME is read-only.
* guix/ui.scm (config-directory): Add #:ensure? parameter and honor it.
* guix/scripts.scm (warn-about-old-distro): Pass #:ensure? #f to
'config-directory'.
* guix/ui.scm (package-field-string): New procedure.
(package-description-string): Use it.
(package-synopsis-string): New procedure.
(package->recutils): Use it.
* guix/scripts/lint.scm (check-synopsis-style)[check-texinfo-markup]:
New procedure. Use it in checks.
* tests/lint.scm: Test it.
* gnu/packages/perl.scm (perl-try-tiny)[synopsis]: Adjust for the
Texinfo markup.
* guix/ui.scm (right-arrow): Call 'set-port-encoding!' to set PORT's
encoding; remove use of 'with-fluids'. This is for compatibility with
Guile 2.2 where the encoding of string ports is not influenced by
%DEFAULT-PORT-ENCODING.
* tests/ui.scm ("show-manifest-transaction"): Likewise.
* guix/ui.scm (fill-paragraph): Don't use '_' as a pattern variable
since that is shadowed by the top-level '_' binding on Guile 2.2.
(show-manifest-transaction): Likewise.
* guix/ui.scm (augmented-system-error-handler): New procedure.
(error-reporting-wrapper): New macro.
(symlink, copy-file): Define using 'error-reporting-wrapper'.
Suggested by John Darrington <john@darrington.wattle.id.au>.
* guix/ui.scm (show-version-and-exit): Make "Copyright (C) 2017"
untranslatable, except "(C)" itself, like Gnulib's version-etc does.
* guix/ui.scm (display-profile-content-diff): New variable.
* guix/scripts/package.scm (process-query): Use display-profile-content-diff.
In collaboration with Benz Schenk.
This avoids loads of needless 'stat' calls due to the default 'relative
setting and the 'canonicalize-path' calls it leads to. This was
especially visible when 'guix substitute' access files in
/var/guix/substitute/cache.
* guix/ui.scm (run-guix-command): Set %FILE-PORT-NAME-CANONICALIZATION
to #f.
Suggested by Jookia.
* guix/derivations.scm (&file-search-error): New error condition.
(search-path*): Raise it when 'search-path' returns #f.
* guix/gexp.scm (search-path*): Remove.
* guix/ui.scm (call-with-error-handling): Add case for
'file-search-error?'.
* tests/derivations.scm ("build-expression->derivation and invalid
module name"): New test.
This provides the ability to use numbers in package names.
Fixes <http://bugs.gnu.org/19219>.
* guix/utils.scm (package-name->name+version): New procedure.
* gnu/packages.scm (%find-package): Add a FALLBACK? keyword argument.
Use the previous method when no package is found.
(specification->package+output, specification->package): Adapt
documentation to new syntax.
* doc/guix.texi (Invoking guix package, Invoking guix import): Likewise.
* guix/ui.scm (package-specification->name+version+output): Likewise.
* guix/scripts/import/hackage.scm (show-help): Likewise.
* tests/guix-build.sh: Adapt to new syntax.
* tests/guix-lint.sh: Likewise.
* tests/guix-package.sh: Likewise.
* tests/ui.scm ("package-specification->name+version+output"): Likewise.
* tests/utils.scm ("package-name->name+version"): Likewise.
* NEWS: Mention new syntax.
Partly fixes <http://bugs.gnu.org/22039>.
* gnu/services/herd.scm: New file.
* gnu-system.am (GNU_SYSTEM_MODULES): Add it.
* gnu/services/shepherd.scm (shepherd-service-canonical-name): New
procedure.
(shepherd-service-file): Export.
* guix/scripts/system.scm (upgrade-shepherd-services): New procedure.
(switch-to-system): Use it.
* guix/ui.scm (info): New procedure.
* doc/guix.texi (Invoking guix system): Mention system services.
* guix/derivations.scm (substitution-oracle): Add #:mode parameter and
honor it.
(derivation-prerequisites-to-build): Likewise.
[derivation-built?]: Take it into account.
* guix/ui.scm (show-what-to-build): Add #:mode parameter. Pass it to
'substitute-oracle' and 'derivations-prerequisites-to-build'.
* tests/derivations.scm ("derivation-prerequisites-to-build in 'check'
mode"): New test.
Fixes <http://bugs.gnu.org/21773>.
Reported by Jan Synáček <jan.synacek@gmail.com>.
* guix/ui.scm (make-regexp*): New procedure.
* guix/scripts/package.scm (options->installable, guix-package): Use it
when processing user-provided regexps.
* guix/scripts/package.scm (delete-generations): Use
'delete-generation*' instead of 'delete-generation'.
(guix-package)[process-actions]: Use 'roll-back*' instead of
'roll-back' and 'switch-to-generation*' instead of
'switch-to-generation'.
(link-to-empty-profile, switch-to-generation,
switch-to-previous-generation, roll-back, delete-generation): Move
to...
* guix/profiles.scm: ... here. Adjust to not print messages and to
return values that can be used by user interfaces.
* guix/ui.scm (display-generation-change, roll-back*,
switch-to-generation*, delete-generation*): New procedures.
* guix/scripts/package.scm (guix-package)[process-query](list-generations):
Move part of the body to 'delete-generation' and
'display-profile-content'.
* guix/ui.scm (display-generation, display-profile-content): New
procedures.
* guix/scripts/system.scm (specification->file-system-mapping): Move from
here...
* guix/ui.scm (specification->file-system-mapping): ... to here.
* guix/scripts/enviroment.scm (show-help): Show help for new options.
(%options): Add --container --network, --expose, and --share options.
(%network-configuration-files): New variable.
(launch-environment, launch-environment/container, requisites*,
inputs->requisites): New procedures.
(guix-environment): Spawn new process in a container when requested.
* doc/guix.texi (Invoking guix environment): Document it.
* tests/guix-environment-container.sh: New file.
* Makefile.am (SH_TESTS): Add it.
Fixes <http://bugs.gnu.org/21536>.
Reported by Alex Kost <alezost@gmail.com>.
* guix/ui.scm (texi->plain-text): Wrap body in 'with-fluids'.
* tests/ui.scm ("package-description-string vs. Unicode"): New test.
Provide support for Texinfo's markup in package description.
* guix/ui.scm (%text-width): New parameter.
(texi->plain-text): New variable.
(package->recutils): Use them.
(package-description-string): New variable.
* emacs/guix-main.scm (%package-param-alist): Use it.
* gnu/packages/perl.scm (perl-devel-globaldestruction)
(perl-devel-lexalias, perl-exporter-lite): Adapt to Texinfo's markup.
* gnu/packages/python.scm (python2-empy): Likewise.
The effect is visible on commands like:
guix build -e '(+ 2 "foo")'
guix build -e '()'
* guix/ui.scm (read/eval): Change handler to properly report syntax errors and
use 'display-error' for other errors.
* guix/ui.scm (load*): Add #:on-error parameter.
[tag, error-string]: New variables.
Wrap 'load' call in 'call-with-prompt'. Pass TAG to 'make-stack'. Honor
ON-ERROR after 'report-load-error' call.
(report-load-error): Change to not exit on error. Make private.
* guix/scripts/system.scm (show-help, %options): Add --on-error.
(guix-system): Use 'load*' and pass it #:on-error.
Reported by Christian Grothoff.
* guix/ui.scm (load*): Add 'frame-with-source'. Set
%load-should-auto-compile. Change error handle to just (exit 1). Add
pre-unwind handler to capture the stack and call 'report-load-error'.
(report-load-error): Add optional 'frame' parameter and pass it to
'display-error'.
* tests/guix-system.sh: Add "unbound variable" test.
* guix/ui.scm (make-user-module, load*): New procedures.
* guix/scripts/system.scm (%user-module): Define in terms of
'make-user-module'.
(read-operating-system): Define in terms of load*'.
* guix/ui.scm (warn-about-load-error): New procedure.
* gnu/packages.scm (package-modules): Wrap 'resolve-interface' call in
'catch #t', and call 'warn-about-load-error' in handler.
* guix/scripts/system.scm (read-operating-system): Replace error
handling code by a call to 'report-load-error'.
* guix/ui.scm (report-load-error): New procedure.
Reported by Alex Kost <alezost@gmail.com>
at <http://lists.gnu.org/archive/html/guix-devel/2015-02/msg00702.html>.
* guix/ui.scm (parse-command-line)[parse-options-from]: Add 'seeds'
parameter.
Thread the result of the first 'parse-options-from' call to the
second.
Fixes <http://bugs.gnu.org/19630>.
Reported by Ricardo Wurmus <ricardo.wurmus@mdc-berlin.de>.
* guix/derivations.scm (&derivation-error,
&derivation-missing-output-error): New error conditions.
(derivation->output-path): Raise a '&derivation-missing-output-error'
if OUTPUT is not an output of DRV.
* guix/ui.scm (call-with-error-handling): Add case for
'derivation-missing-output-error?'.
(show-what-to-build): Check whether (derivation-outputs drv) is
empty.
* tests/packages.scm ("reference to non-existent output"): Add test.
* guix/ui.scm (report-error): Export.
* guix/scripts/system.scm (read-operating-system): Report syntax errors
using standard GNU format. Report other errors using 'display-error'.
This makes 'guix environment PACKAGE' significantly faster when
substitutes are enabled. Before that, it would lead to many invocations
of 'guix substitute-binary', one per 'derivation-prerequisites-to-build'
call. Now, all these are replaced by a single invocation.
* guix/derivations.scm (derivation-output-paths, substitution-oracle):
New procedures.
(derivation-prerequisites-to-build): Replace #:use-substitutes? with
#:substitutable?. Remove the local 'derivation-output-paths' and
'substitutable?'.
* guix/ui.scm (show-what-to-build): Add 'substitutable?'. Pass it to
'derivation-prerequisites-to-build'.
[built-or-substitutable?]: Use it instead of 'has-substitutes?'.
* tests/derivations.scm ("derivation-prerequisites-to-build and
substitutes"): Use #:substitutable? instead of #:use-substitutes?.
* guix/ui.scm (size->number): Add a bunch of large units. Recognize
one-letter unit names. Change "KB" to "kB".
* tests/ui.scm ("size->number, 1T"): New test.
* doc/guix.texi (Invoking guix gc): Add cross-reference to "Block size"
in the Coreutils manual.
(Invoking guix system): Likewise.
Previously 'guix pull' would just fail with "No such file or directory"
if ~/.config didn't already exist.
* guix/ui.scm (config-directory): Use 'mkdir-p' instead of 'mkdir'.
Change the 'catch' handler to expect errors different from EEXIST.
Fixes <http://bugs.gnu.org/17468>.
* guix/ui.scm (fill-paragraph): Two spaces after period and no spaces before newline.
* tests/ui.scm: New test case.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
Fixes a regression introduced in 56b8210 ("guix build: Allow gexps to be
passed to '-e'.")
* guix/ui.scm (%guix-user-module): Wrap in 'delay'.
(read/eval): Adjust accordingly.
* guix/ui.scm (%guix-user-module): New variable.
(read/eval): Pass it as the second argument to 'eval'.
* guix/scripts/build.scm (options/resolve-packages): Add case for
'gexp?'.
* tests/guix-build.sh: Add tests.
* doc/guix.texi (Invoking guix build): Document '-e gexp'.
guxi build: Allow gexps to be passed to '-e'.
* guix/ui.scm (%guix-user-module): New variable.
(read/eval): Pass it as the second argument to 'eval'.
* guix/scripts/build.scm (options/resolve-packages): Add case for
'gexp?'.
* tests/guix-build.sh: Add tests.
* doc/guix.texi (Invoking guix build): Document '-e gexp'.
* guix/ui.scm (show-what-to-build)[built-or-substitutable?]: New
procedure. Check whether OUT is #f.
Use it.
* tests/ui.scm ("show-what-to-build, zero outputs"): New test.
* guix/monads.scm: Unexport 'lower-inputs' and 'derivation-expression'.
(text-file*): Add comment about the switch to 'gexp->derivation'.
(lower-inputs): Add comment about its doom.
(derivation-expression): Likewise.
* guix/gexp.scm (lower-inputs*): Rename to...
(lower-inputs): ... this. Update callers.
* tests/monads.scm (derivation-expression): New procedure.
* doc/guix.texi (The Store Monad): Use 'gexp->derivation' instead of
'derivation-expression'. Remove documentation of
'derivation-expression'.
* guix/ui.scm (read/eval): Use THE-ROOT-MODULE so that macros are
properly expanded.
* tests/guix-build.sh: Use 'gexp->derivation' instead of
'derivation-expression'.monads: Hide 'derivation-expression' and 'lower-inputs'.
* nix/nix-daemon/guix-daemon.cc (GUIX_OPT_NO_BUILD_HOOK): New macro.
(options): Add '--no-build-hook'.
(parse_opt): Handle it.
(main)[HAVE_DAEMON_OFFLOAD_HOOK]: Set 'useBuildHook' by default.
Set $NIX_BUILD_HOOK to our offload hook unless otherwise specified.
[!HAVE_DAEMON_OFFLOAD_HOOK]: Clear 'useBuildHook'.
* pre-inst-env.in: Set and export NIX_BUILD_HOOK.
* nix/scripts/offload.in, guix/scripts/offload.scm: New files.
* guix/ui.scm (show-guix-help)[internal?]: Add "offload".
* config-daemon.ac: Call 'GUIX_CHECK_UNBUFFERED_CBIP'.
Instantiate 'nix/scripts/offload'. Set 'BUILD_DAEMON_OFFLOAD'
conditional, and optionally define 'HAVE_DEAMON_OFFLOAD_HOOK' cpp
macro.
* daemon.am (nodist_pkglibexec_SCRIPTS)[BUILD_DAEMON_OFFLOAD]: Add it.
* Makefile.am (MODULES)[BUILD_DAEMON_OFFLOAD]: Add
'guix/scripts/offload.scm'.
(EXTRA_DIST)[!BUILD_DAEMON_OFFLOAD]: Likewise.
* m4/guix.m4 (GUIX_CHECK_UNBUFFERED_CBIP): New macro.
* doc/guix.texi (Setting Up the Daemon): Move most of the body to...
(Build Environment Setup): ... this. New subsection.
(Daemon Offload Setup): New subsection.
* guix/ui.scm (read/eval): New procedure.
(read/eval-package-expression): Use it.
* guix/scripts/build.scm (derivations-from-package-expressions): Rename to...
(derivation-from-expression): ... this. Accept procedures, under the
assumption that they are monadic thunk.
(show-help): Adjust accordingly.
(guix-build): Ditto.
* tests/guix-build.sh: Add test.
* doc/guix.texi (Invoking guix build): Augment description of '-e'.
* guix/ui.scm (package-specification->name+version+output): New
procedure.
* guix/scripts/package.scm (specification->package+output): Use it.
* tests/ui.scm ("package-specification->name+version+output"): New test.
* scripts/guix.in (config-lookup): Add "localedir" entry.
(run-guix-main): Add call to 'bindtextdomain'.
* guix/ui.scm (initialize-guix): Use %GETTEXT-DOMAIN instead of a
literal.
* guix/derivations.scm (derivation->output-path,
derivation->output-paths): New procedures.
(derivation-path->output-path): Use 'derivation->output-path'.
(derivation-path->output-paths): Use 'derivation->output-paths'.
(derivation): Accept 'derivation?' objects as inputs. Return a single
value.
(build-derivations): New procedure.
(compiled-modules): Use 'derivation->output-paths'.
(build-expression->derivation)[source-path]: Add case for when the
input matches 'derivation?'.
[prologue]: Accept 'derivation?' objects in INPUTS.
[mod-dir, go-dir]: Use 'derivation->output-path'.
* guix/download.scm (url-fetch): Adjust to the single-value return.
* guix/packages.scm (package-output): Use 'derivation->output-path'.
* guix/scripts/build.scm (guix-build): When the argument is
'derivation-path?', pass it through 'read-derivation'.
Use 'derivation-file-name' to print out the .drv file names, and to
register them. Use 'derivation->output-path' instead of
'derivation-path->output-path'.
* guix/scripts/package.scm (roll-back): Adjust to the single-value
return.
(guix-package): Use 'derivation->output-path'.
* guix/ui.scm (show-what-to-build): Adjust to deal with 'derivation?'
objects instead of .drv file names.
* gnu/system/grub.scm (grub-configuration-file): Use
'derivation->output-path' instead of 'derivation-path->output-path'.
* gnu/system/vm.scm (qemu-image, system-qemu-image): Likewise.
* tests/builders.scm, tests/derivations.scm, tests/packages.scm,
tests/store.scm, tests/union.scm: Adjust to the new calling
convention.
* doc/guix.texi (Defining Packages, The Store, Derivations): Adjust
accordingly.
* guix/scripts/substitute-binary.scm (guix-substitute-binary)["--substitute"]:
Show the Nar size, when available.
* guix/ui.scm (show-what-to-build): Add 'TODO'.
Reported by Nikita Karetnikov and Cyril Roelandt.
* guix/ui.scm (show-what-to-build): Call `substitutable-path-info'
only when USE-SUBSTITUTES? is true.
* guix/ui.scm (define-diagnostic): Use `free-identifier=?' to compare
the user's input with `_' and `N-". This should fix builds with Guile 2.1.
Reported by Cojocaru Alexandru <xojoc@gmx.com>.
* guix/packages.scm (&package-cross-build-system-error): New condition type.
(package-cross-derivation): Raise &package-cross-build-system-error
when the build system doesn't support cross builds.
* guix/ui.scm (call-with-error-handling): Add
package-cross-build-system-error? case.
* tests/packages.scm ("package-cross-derivation, no cross builder"): New test.
* guix/ui.scm (show-guix-usage): Mention `guix --help'.
Suggested by Mark H. Weaver.
(run-guix-command): Invoke it when a command is not found.
(guix-main): Adjust accordingly.
* guix/ui.scm (run-guix-command): Can `resolve-interface' errors and
report them with `leave'. Parameterize `program-name' from here.
(guix-main): Remove parameterization of `program-name'.
* guix/ui.scm (define-diagnostic, warning, report-error, leave): Move
definitions before any use. Reported by Nikita Karetnikov.
(install-locale): Move back close to `initialize-guix'.
* guix/ui.scm (define-diagnostic): New macro, which is based on the
previous version of 'warning'.
(warning, leave): Redefine using 'define-diagnostic'.
(report-error): New macro.
(install-locale): Use 'warning' instead of 'format'.
(call-with-error-handling): Adjust 'leave'.
* gnu/packages.scm (package-files): Use 'warning' instead of 'format'.
* guix/gnu-maintenance.scm (http-fetch): Use 'warning' and 'leave'.
* guix/scripts/build.scm (derivations-from-package-expressions, guix-build):
Adjust 'leave'.
* guix/scripts/download.scm (guix-download): Adjust 'leave'.
* guix/scripts/gc.scm (size->number, %options): Adjust 'leave'.
* guix/scripts/package.scm (roll-back, guix-package): Adjust 'leave'.
* po/POTFILES.in: Add 'guix/gnu-maintenance.scm'.
* guix/derivations.scm (derivation-input-output-paths): New procedure.
(derivation-prerequisites-to-build): New `use-substitutes?' keyword
argument. Change two return the list of substitutable paths as a
second argument.
* guix/ui.scm (show-what-to-build): Turn `dry-run?' into a keyword
argument. New `use-substitutes?' keyword argument. Use `fold2' and
adjust to use both return values of
`derivation-prerequisites-to-build'. Display what will/would be
downloaded.
* guix/scripts/build.scm (guix-build): Adjust accordingly.
* guix/scripts/package.scm (guix-package): Likewise.
* tests/derivations.scm ("derivation-prerequisites-to-build and
substitutes"): New test.
* guix/ui.scm (program-name, guix-warning-port): New variables.
(warning): New macro.
(guix-main): Parametrize PROGRAM-NAME.
* guix/scripts/build.scm, guix/scripts/download.scm,
guix/scripts/gc.scm, guix/scripts/package.scm: Adjust to use `leave'
and `warning' consistently.
* guix/store.scm (&nix-connection-error): New condition type.
(open-connection): Translate `system-error' during the `connect' call
into `&nix-connection-error'.
* guix/ui.scm (call-with-error-handling): Add case for `nix-connection-error?'.
* guix/scripts/package.scm (guix-package): Move `open-connection' call
within `with-error-handling'.
* guix/scripts/pull.scm (guix-pull): Likewise.
* guix/scripts/download.scm (guix-download): Move body within
`with-error-handling'.
* guix/ui.scm (show-what-to-build): Return (length req*).
* guix/scripts/pull.scm (guix-pull): Print an "already up to date"
message when there's nothing to build.
* guix/scripts/pull.scm: New file.
* Makefile.am (MODULES): Add it.
* doc/guix.texi (Invoking guix pull): New node.
(Invoking guix package): Add cross-ref to it.
* guix/ui.scm (config-directory): New procedure.
* scripts/guix.in: When `GUIX_UNINSTALLED' is undefined, add
$XDG_CONFIG_HOME/guix/latest to the search path.
* po/POTFILES.in: Add guix/scripts/pull.scm.
* guix/ui.scm (fill-paragraph, string->recutils, package->recutils): New
procedures.
* guix-package.in (guix-package)[process-query]: Use `package->recutils'
to display package meta-data.
* tests/guix-package.sh: Adjust test.
* tests/ui.scm: New file.
* Makefile.am (TESTS): Add it.
* doc/guix.texi (Invoking guix-package): Adjust `--search'
documentation, and give an example.
* guix/ui.scm (install-locale): New procedure.
* guix-build.in, guix-download.in, guix-gc.in, guix-import.in,
guix-package.in: Use it instead of (setlocale LC_ALL "").
* guix/ui.scm: New file.
* Makefile.am (MODULES): Add it.
* po/POTFILES.in: Add it.
* guix-build.in: Use it.
(_, N_, leave): Remove.
(guix-build): Use `with-error-handling' instead of the `guard' form.
* guix-download.in: Use it.
(_, N_, leave): Remove.
