* gnu/services/base.scm (%loopback-static-networking): New variable.
(%base-services): Use it.
* gnu/system/hurd.scm (%base-services/hurd): Use it.
* gnu/system/install.scm (%installation-services): Use it.
* doc/guix.texi (Networking Setup): Document it.
* gnu/services/base.scm (<static-networking>)[interface, ip, netmask]
[gateway]: Remove.
[addresses, links, routes]: New fields.
[requirement]: Default to '(udev).
(<network-address>, <network-link>, <network-route>): New record types.
(ensure-no-separate-netmask, %ensure-no-separate-netmask): Remove.
(ipv6-address?, cidr->netmask, ip+netmask->cidr)
(network-set-up/hurd, network-tear-down/hurd)
(network-set-up/linux, network-tear-down/linux)
(static-networking->hurd-pfinet-options): New procedures.
(static-networking-shepherd-service): New procedure.
(static-networking-shepherd-services): Rewrite in terms of the above.
(static-networking-service): Deprecate. Adjust to new
'static-networking' API.
(%base-services): Likewise.
* gnu/system/install.scm (%installation-services): Likewise.
* gnu/system/hurd.scm (%base-services/hurd): Likewise, and separate
'loopback' from 'networking'.
* gnu/build/hurd-boot.scm (set-hurd-device-translators): Remove
"servers/socket/2".
* gnu/tests/networking.scm (run-openvswitch-test)["networking has
started on ovs0"]: Check for 'networking instead of 'networking-ovs0,
which is no longer provided.
* doc/guix.texi (Networking Setup): Document the new interface. Remove
documentation of 'static-networking-service'.
(Virtualization Services): Change Ganeti example to use the new
interface.
This is a followup to a7ac19851baab3fbcc40c4b2cf5b00a6ac9cd2f3.
* gnu/system/install.scm (installation-os)[setuid-programs]: Use
'setuid-program'.
* gnu/system/hurd.scm (%setuid-programs/hurd): Use 'file-like->setuid-program'.
Until now deduplication was performed as an additional pass after
copying files, which involve re-traversing all the files that had just
been copied.
* guix/store/deduplication.scm (copy-file/deduplicate): New procedure.
* tests/store-deduplication.scm ("copy-file/deduplicate"): New test.
* guix/build/store-copy.scm (populate-store): Add #:deduplicate?
parameter and honor it.
* tests/gexp.scm ("gexp->derivation, store copy"): Pass #:deduplicate? #f
to 'populate-store'.
* gnu/build/image.scm (initialize-root-partition): Pass #:deduplicate?
to 'populate-store'. Pass #:deduplicate? #f to 'register-closure'.
* gnu/build/vm.scm (root-partition-initializer): Likewise.
* gnu/build/install.scm (populate-single-profile-directory): Pass
#:deduplicate? #f to 'populate-store'.
* gnu/build/linux-initrd.scm (build-initrd): Likewise.
* guix/scripts/pack.scm (self-contained-tarball)[import-module?]: New
procedure.
[build]: Pass it as an argument to 'source-module-closure'.
* guix/scripts/pack.scm (squashfs-image)[build]: Wrap in
'with-extensions'.
* gnu/system/linux-initrd.scm (expression->initrd)[import-module?]: New
procedure.
[builder]: Pass it to 'source-module-closure'.
* gnu/system/install.scm (cow-store-service-type)[import-module?]: New
procedure. Pass it to 'source-module-closure'.
This reverts commit 73ddcab6075f60ef9b3cd72a35fbf7f5d622b6ef.
Blacklisting has become necessary again on my AMD machines, else
the installer screen stays black.
Move the cow-store procedure from the service declaration in (gnu system
install) to (gnu build install), so that it can be called from within a
different context than Shepherd.
* gnu/build/install.scm (mount-cow-store, unmount-cow-store): New procedures.
* gnu/system/install.scm (make-cow-store): Remove it,
(cow-store-service-type): adapt it accordingly.
Tools such as efibootmgr rely on the deprecated /sys/firmware/efi/vars API as
well as on the new /sys/firmware/efi/efivars API. The latter needs to be
mounted.
Reported by Keyhenge here:
https://lists.gnu.org/archive/html/bug-guix/2020-04/msg00274.html
Here is the efivarfs documentation:
https://www.kernel.org/doc/Documentation/filesystems/efivarfs.txt.
* gnu/system/file-systems.scm (%efivars-file-system): New exported variable,
(%base-file-systems): add it.
* gnu/system/install.scm (%efivars-file-system): Add it.
Signed-off-by: Mathieu Othacehe <othacehe@gnu.org>
During the installation, it may be needed to build locales that are not
covered by glibc-utf8-locales. Make sure that the libraries required to build
locales are available.
This is a follow-up of 0eed77127592323d89f56c215a15374a1aaae110.
* gnu/system/install.scm (installation-os)[services]: Add
%default-locale-libcs to gc-root-service-type.
This reverts commit 785919121066a10b291d783b6903b5e368e992a8, which is no longer
needed since uvesafb was added in 557e6820a77b24f8f3f03f28ee473137b1caeb64.
Because the installer's uvesafb service loads uvesafb only on some machines.
This is a follow-up to commit 0ad60b2a89d6d387236466e0bcdd61ac489fca37.
* gnu/system/install.scm (uvesafb-shepherd-service): Adjust provision and
description fields.
This is a follow-up to commit 557e6820a77b24f8f3f03f28ee473137b1caeb64.
* gnu/system/install.scm (uvesafb-shepherd-service): Check
that /dev/fb0 is not already present.
Fixes <https://bugs.gnu.org/40538>.
Machines without Kernel Mode Setting (those with many old and current AMD
GPUs, SiS GPUs, …) need uvesafb to show the GUI installer. Some may also need
a kernel parameter like nomodeset or vga=793, but we leave that for the user
to specify in GRUB.
* gnu/system/install.scm (uvesafb-shepherd-service): New procedure.
(uvesafb-service-type): New variable.
(%installation-services): Add it.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
This is a followup to 99c45877a984dd0148151b2e304afef6fb04f1a5, which
introduced a regression: "guix system build gnu/system/install.scm"
would fail to find the .tmpl files.
* gnu/system/install.scm (/etc/configuration-files)[file]: Remove.
[directory]: Use 'local-file' with a literal string.
* gnu/packages/bootloaders (u-boot-firefly-rk3399): New variable.
* gnu/bootloader/u-boot (install-firefly-rk3399-u-boot): New variable.
(u-boot-firefly-rk3399-bootloader): New variable.
* gnu/system/install (define firefly-rk3399-installation-os): New variable.
* gnu/packages/bootloaders (u-boot-rock64-rk3328): New variable.
* gnu/bootloader/u-boot (install-rock64-rk3328-u-boot): New variable.
(u-boot-rock64-rk3328-bootloader): New variable.
* gnu/system/install (define rock64-installation-os): New variable.
Suggested by Florian Pelz.
* gnu/system/install.scm (%installation-node-names): New variable.
(log-to-info): Expect the chosen locale as an argument. Compute the
language, Info file name, and node name. Install the locale.
(documentation-shepherd-service): Add 'locale' parameter to the 'start'
action and honor it. Set GUIX_LOCPATH and TERM as environment variables
for the process.
* gnu/installer.scm (apply-locale): Use (gnu services herd). Call
'stop-service' and 'start-service' with the chosen locale.
* gnu/system/install.scm (log-to-info): Add 'tty' and 'user'
parameters. Open the tty and change UIDs/GIDs.
(documentation-shepherd-service): New procedure.
(%documentation-users, documentation-service-type): New variables.
(%installation-services): Use it instead of 'mingetty-service'.
* gnu/installer.scm: Rename to ...
* gnu/installer/record.scm: ... this.
* gnu/installer/build-installer.scm: Move everything to the build side and
rename to gnu/installer.scm.
* gnu/installer/newt.scm: Remove all the gexps and add depencies to newt
modules as this code will only be used on the build side by now.
* gnu/local.mk (GNU_SYSTEM_MODULES): Adapt it,
(dist_installer_DATA): New rule to install installer's aux-files.
* gnu/system/install.scm (%installation-services): Use only
'installer-program' from (gnu installer). The installer is now choosen on the
build side.
* guix/self.scm (*system-modules*): Restore previous behaviour and add all
installer files to #:extra-files field of the scheme-node.
* po/guix/POTFILES.in: Adapt it.
Source /etc/environment just before starting the installer. The login program
is supposed to load the environment variables of this file through PAM, but as
we replace it by the installer, they are no longer available. This is mostly
useful for the LANG environment variable.
* gnu/installer/build-installer.scm (installer-program-launcher): New exported
procedure.
* gnu/system/install.scm (%installation-services): Restore most of the origin
code. kmscon is only started on TTY1, and the graphical installer is the
login-program.
* configure.ac: Require that guile-newt is available.
* gnu/installer.scm: New file.
* gnu/installer/aux-files/logo.txt: New file.
* gnu/installer/build-installer.scm: New file.
* gnu/installer/connman.scm: New file.
* gnu/installer/keymap.scm: New file.
* gnu/installer/locale.scm: New file.
* gnu/installer/newt.scm: New file.
* gnu/installer/newt/ethernet.scm: New file.
* gnu/installer/newt/hostname.scm: New file.
* gnu/installer/newt/keymap.scm: New file.
* gnu/installer/newt/locale.scm: New file.
* gnu/installer/newt/menu.scm: New file.
* gnu/installer/newt/network.scm: New file.
* gnu/installer/newt/page.scm: New file.
* gnu/installer/newt/timezone.scm: New file.
* gnu/installer/newt/user.scm: New file.
* gnu/installer/newt/utils.scm: New file.
* gnu/installer/newt/welcome.scm: New file.
* gnu/installer/newt/wifi.scm: New file.
* gnu/installer/steps.scm: New file.
* gnu/installer/timezone.scm: New file.
* gnu/installer/utils.scm: New file.
* gnu/local.mk (GNU_SYSTEM_MODULES): Add previous files.
* gnu/system.scm: Export %root-account.
* gnu/system/install.scm (%installation-services): Use kmscon instead of linux
VT for all tty.
(installation-os)[users]: Add the graphical installer as shell of the root
account.
[packages]: Add font related packages.
* po/guix/POTFILES.in: Add installer files.
These procedures were already either undocumented (and de facto
deprecated) or documented as deprecated or redundant.
* gnu/services/base.scm (guix-service, guix-publish-service): Mark as
deprecated.
* gnu/services/mcron.scm (mcron-service): Likewise.
* gnu/services/networking.scm (tor-service): Likewise.
* doc/guix.texi (Scheduled Job Execution): Remove 'mcron-service' and
adjust example.
(Networking Services): Remove 'tor-service'.
* gnu/tests/base.scm (%mcron-os): Use 'mcron-service-type' instead of
'mcron-service'.
* gnu/tests/networking.scm (%tor-os): Use 'tor-service-type' instead of
'tor-service'.
* tests/guix-system.sh: Likewise.
