The previous instructions were correct, but we got too many bug reports
with a root cause of "did not build Guix yet".
Other parts of the manual already instruct `make && make check`, so this
makes the treatment of building Guix more consistent, too.
* doc/contributing.texi (Building from Git): Instruct the user to run
`make` when building Guix.
That way, the default config with (advertises? #t) and without a cache
will offer zstd-compressed substitutes, which should lead to much higher
throughput than gzip.
* gnu/services/base.scm (default-compression): When
'guix-publish-configuration-cache' returns true, use higher level
compression ratios. Add "zstd".
* doc/guix.texi (Base Services): Mention zstd.
With this change, each substitute occupies a single line of
output (instead of two) when using '-v1', the default for 'guix package'
& co.
* guix/status.scm (print-build-event): Add #:print-urls? and honor it.
(print-build-event/quiet): Pass #:print-urls? #f.
(print-build-event/quiet-with-urls): New procedure.
(logger-for-level): Add case for LEVEL 2.
* doc/guix.texi (Common Build Options): Adjust '--verbosity'
documentation.
This is no longer needed as the Cuirass specification mechanism has been
rewritten.
* doc/guix.texi (Continuous Integration): Remove Simple Cuirass section.
* gnu/packages/julia-xyz.scm (julia-jllwrappers): New variable.
* doc/guix.texi (julia-build-system): Document how to use jllwrappers to use
to guix binary packages.
Co-authored-by: Ludovic Courtès <ludo@gnu.org>
This hotfix package is no longer necessary as the ability to parameterize the
way htmlprag tokenizes HTML was added in guile-lib 0.2.7.
* doc/build.scm (guile-lib/htmlprag-fixed): Remove variable.
(html-manual-identifier-index): Replace guile-lib/htmlprag-fixed by guile-lib,
and make set the %strict-tokenizer? parameter to #t.
(syntax-highlighted-html): Likewise.
For more context, see the discussion in <https://bugs.gnu.org/47111>.
* doc/contributing.texi (Commit Access): Add paragraph about removing
inactive committers.
References:
https://sysctl-explorer.net/fs/protected_hardlinks/https://sysctl-explorer.net/fs/protected_symlinks/
* gnu/services/sysctl.scm (%default-sysctl-settings): New public variable.
(<sysctl-configuration>): Use %default-sysctl-settings as the default value.
* gnu/services/base.scm (%base-services): Add sysctl-service-type.
* doc/guix.texi (Miscellaneous Services): Document the new defaults.
Signed-off-by: Ludovic Courtès <ludo@gnu.org>
This brings total updater coverage, as reported by 'guix refresh
--list-updaters', from 78% to 88.3%. Among many other things, it covers
freedesktop.org packages.
* guix/gnu-maintenance.scm (html-updatable-package?)
(latest-html-updatable-release): New procedures.
(%generic-html-updater): New variable.
* doc/guix.texi (Invoking guix refresh): Document it.
Fixes <https://bugs.gnu.org/46803>.
Reported by Luis Felipe <luis.felipe.la@protonmail.com>.
* doc/guix.texi (Getting Started): Introduce the term "profile".
(Invoking guix package): Likewise.
mongodb 3.4.10 has unpatched CVEs and mongodb 3.4.24 has some files in the
release tarball under the SSPL, therefore we cannot provide mongodb while
upholding to good security standards.
It turns out feff80cec3 was right since while
the main license file wasnt altered to SSPL, some files in the tree contain
SSPL headers.
* gnu/packages/databases.scm (go-gopkg.in-mgo.v2): Remove.
* gnu/packages/databases.scm (mongo-tools): Remove.
* doc/guix.texi (mongodb-service-type): Remove.
* gnu/tests/databases.scm (%test-mongodb, %mongodb-os, run-mongodb-test):
Remove.
* gnu/services/databases.scm (mongodb-configuration, mongodb-configuration?,
mongodb-configuration-mongodb, mongodb-configuration-config-file,
mongodb-configuration-data-directory, mongodb-service-type,
%default-mongodb-configuration-file, %mongodb-accounts, mongodb-activation,
mongodb-shepherd-service): Remove.
* gnu/packages/databases.scm (mongodb): Remove.
Fixes <https://issues.guix.gnu.org/36117>.
Before this change, the 'binfmt_misc' entries registered for QEMU would not be
usable in container contexts outside of guix-daemon (without manually bind
mounting file names).
For example:
$ docker run --rm arm32v7/debian true
standard_init_linux.go:207: exec user process caused "no such file or directory"
After this change, any container can make use of the QEMU binfmt_misc
registrations, as their corresponding QEMU static binaries are fully
pre-loaded by the kernel.
* gnu/services/virtualization.scm (<qemu-platform>): Define using
'define-record-type*'.
[flags]: New field, which defaults to "F" (fix binary).
(%i386, %i486, %alpha, %arm, %armeb, %sparc, %sparc32plus, %ppc, %ppc64)
(%ppc64le, %m68k, %mips, %mipsel, %mipsn32, %mipsn32el, %mips64, %mips64el)
(%riscv32, %riscv64, %sh4, %sh4eb, %s390x, %aarch64, %hppa): Adjust.
(qemu-binfmt-guix-chroot): Remove variable.
(qemu-binfmt-service-type): Remove the qemu-binfmt-guix-chroot extension.
* gnu/services/qemu-binfmt (qemu-platform->binfmt): Use the static output of
QEMU.
* doc/contributing.texi (Submitting Patches): Update doc.
* doc/guix.texi (Virtualization Services): Update doc.
* gnu/services/guix.scm (guix-build-coordinator-agent-dynamic-auth-with-file,
guix-build-coordinator-agent-dynamic-auth-with-filen?,
guix-build-coordinator-agent-dynamic-auth-with-file-agent-name,
guix-build-coordinator-agent-dynamic-auth-with-file-token-file): New procedures.
(guix-build-coordinator-agent-shepherd-services): Handle new dynamic auth with
file record.
* doc/guix.texi (Guix Build Coordinator): Document the new dynamic auth with
file record.
A new authentication approach has been added to the coordinator, so to better
represent the options, this commit changes the configuration to accept
different records, each for different authentication approaches.
* gnu/services/guix.scm (guix-build-coordinator-agent-configuration-uuid,
guix-build-coordinator-agent-configuration-password,
guix-build-coordinator-agent-configuration-password-file): Removed
procedures.
(guix-build-coordinator-agent-password-auth,
guix-build-coordinator-agent-password-auth?,
guix-build-coordinator-agent-password-auth-uuid,
guix-build-coordinator-agent-password-auth-password,
guix-build-coordinator-agent-password-file-auth,
guix-build-coordinator-agent-password-file-auth?,
guix-build-coordinator-agent-password-file-auth-uuid,
guix-build-coordinator-agent-password-file-auth-password-file): New
procedures.
(guix-build-coordinator-agent-shepherd-services): Adjust to handle the
authentication field and it's possible record values.
* doc/guix.texi (Guix Build Coordinator): Update documentation.
* doc/guix.texi (sane-service-type): Move from between documentation
about geoclue, expand slightly.
(sane-backends-minimal): New description.
(sane-backends): New description, new example.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
Instead of returning multiple services in simple-cuirass-services, rely on the
instantiate-missing-services procedure to instantiate postgresql and
postgresql-role-service-type when missing.
Turn simple-cuirass-services procedure into
simple-cuirass-configuration->specs, that takes a simple-cuirass-configuration
record and returns a Cuirass specification.
Suggested-by: Ludovic Courtès <ludo@gnu.org>
* gnu/services/cuirass.scm (%default-cuirass-config): Remove it.
(simple-cuirass-services): Rename it to ...
(simple-cuirass-configuration->specs): ... this procedure.
* gnu/tests/cuirass.scm (cuirass-services): Remove postgresql and
postgresql-role services that are automatically instantiated.
(simple-cuirass-service): New variable.
(%cuirass-simple-test): Adapt it to use simple-cuirass-configuration->specs
instead of simple-cuirass-services.
* doc/guix.texi (Simple Cuirass): Update it.
* gnu/services/cuirass.scm (<build-manifest>,
<simple-cuirass-configuration>): New records.
(build-manifest, build-manifest?, simple-cuirass-configuration,
simple-cuirass-configuration?, simple-cuirass-services): New procedures.
(%default-cuirass-config): New variable.
* gnu/tests/cuirass.scm (%cuirass-simple-test): New variable.
* doc/guix.texi (Continuous Integration): Document it.
* doc/guix.texi (Base Services)[pam-limits-service]: Add an example and
explanation of how the 'nofile', or open file descriptors value, can be
configured.
Remove the 'vm-image' command that has been superseded by the 'image'
command.
* gnu/system/vm.scm (system-qemu-image): Remove it.
* guix/scripts/system.scm (system-derivation-for-action): Mark 'vm-image'
command as deprecated and use the image API to produce the VM image.
(perform-action, show-help): Adapt accordingly.
* tests/guix-system.sh: Ditto.
* doc/guix.texi (Invoking guix system,
Running Guix in a VM): Ditto.
* etc/completion/fish/guix.fish: Ditto.
* etc/completion/zsh/_guix: Ditto.
* gnu/services/vpn.scm (wireguard-peer, wireguard-configuration): New records.
(wireguard-service-type): New variable.
* doc/guix.texi (VPN Services): Document it.
* gnu/services/web.scm (<agate-configuration>): New record type.
(agate-accounts, agate-shepherd-service): New procedures.
(agate-service-type): New variable.
* doc/guix.texi (Web Services): Document it.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
* doc/guix.texi (Invoking guix environment): Explain how to exit and clean up
a Guix environment.
The current documentation doesn't explain how to exit an environment or how to
remove the packages after exiting.
Signed-off-by: Nicolas Goaziou <mail@nicolasgoaziou.fr>
