Without this, the kernel cannot write to the display until the
full-featured driver module (often i915) is loaded from the root file
system.
If the root file system is encrypted, the initrd's passphrase prompt
won't make it to the screen, and the fully responsive system will appear
frozen whilst waiting for user input.
* gnu/packages/aux-files/linux-libre/4.4-i686.conf,
gnu/packages/aux-files/linux-libre/4.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.15-i686.conf,
gnu/packages/aux-files/linux-libre/5.15-x86_64.conf:
Mark simple framebuffers as generic system ones and enable ‘Google’
firmware drivers to enable Coreboot table support and its dependent
framebuffer driver module.
* gnu/system/linux-initrd.scm (default-initrd-modules):
Add the framebuffer_coreboot and simplefb modules on x86 systems.
* gnu/packages/aux-files/emacs/guix-emacs.el
(guix-emacs--non-core-load-path): New procedure.
(guix-emacs-autoload-packages): Use it here.
(guix-emacs-load-package-descriptors): New procedure.
* gnu/packages/emacs.scm (emacs)[install-site-start]: Install advice to run
‘guix-emacs-load-package-descriptors’.
Fixes <https://issues.guix.gnu.org/50105>.
* gnu/packages/aux-files/python/sitecustomize.py: Add a comment explaining the
general idea, and use sys.prefix instead of sys.executable.
(major_minor): Use the unpacking operator (*) to provide the arguments.
(site_packages_prefix): Use os.path.join to form the path.
(python_site): Likewise. Use sys.prefix instead of sys.executable.
(all_sites_raw): Split on os.path.pathsep.
(sys.path): Directly splice the result in the list.
Suggested-by: Hartmut Goebel <h.goebel@crazy-compilers.com>
Reported-by: Mathieu Othacehe <othacehe@gnu.org>
Signed-off-by: Maxim Cournoyer <maxim.cournoyer@gmail.com>
* gnu/packages/aux-files/python/sanity-check.py: Catch the less specific
EnvironmentError rather than FileNotFoundError as the latter is Python 3
only.
For more information about these configuration options, read
<https://www.kernel.org/doc/Documentation/cpu-freq/governors.txt> or the
document 'Documentation/admin-guide/pm/cpufreq.rst' in the linux-libre
source distribution.
* gnu/packages/aux-files/linux-libre/4.14-arm.conf,
gnu/packages/aux-files/linux-libre/4.14-i686.conf,
gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-arm.conf,
gnu/packages/aux-files/linux-libre/4.19-arm64.conf,
gnu/packages/aux-files/linux-libre/4.19-i686.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.9-i686.conf,
gnu/packages/aux-files/linux-libre/4.9-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-i686.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.12-i686.conf,
gnu/packages/aux-files/linux-libre/5.12-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.13-i686.conf,
gnu/packages/aux-files/linux-libre/5.13-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-arm.conf,
gnu/packages/aux-files/linux-libre/5.4-arm64.conf,
gnu/packages/aux-files/linux-libre/5.4-i686.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf: Unset
'CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE' and set
'CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y'.
Requested by PsixisP on #guix:
“I have a laptop that requires CONFIG_VMD (Intel's software RAID) in
order for the kernel to see the internal NVMe drive. This is not
present in the default Guix kernel.”
* gnu/packages/aux-files/linux-libre/4.14-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.19-x86_64.conf,
gnu/packages/aux-files/linux-libre/4.9-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.10-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.12-x86_64.conf,
gnu/packages/aux-files/linux-libre/5.4-x86_64.conf:
Enable modular CONFIG_VMD.
Since the switch to Guile 3.0.7 using mini-GMP, we can leave
'scm_install_gmp_memory_functions' to its default value, which is to use
custom memory allocators; there is no interference with users of GMP
such as GnuTLS/Nettle.
* gnu/packages/aux-files/guile-launcher.c (main) [!SCM_ENABLE_MINI_GMP]:
Leave 'scm_install_gmp_memory_functions' unchanged.
and arm64.
This has been the recommended default for arm and arm64 since v5.9
(upstream commit f259eab3ea0e7ed73db91f6358274dd3a9a27d79).
* gnu/packages/aux-files/linux-libre/5.12-arm.conf,
gnu/packages/aux-files/linux-libre/5.12-arm64.conf: Enable
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL, disable
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE.
This has been the recommended default for arm and arm64 since since
v5.9 (upstream commit f259eab3ea0e7ed73db91f6358274dd3a9a27d79).
* gnu/packages/aux-files/linux-libre/5.10-arm.conf,
gnu/packages/aux-files/linux-libre/5.10-arm.conf,
gnu/packages/aux-files/linux-libre/5.11-arm.conf,
gnu/packages/aux-files/linux-libre/5.11-arm.conf: Enable
CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL, disable
CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE.
This exception was thrown while running the sanity-check on the python-isort
package, which doesn't make use of a setuptools-based build system but rather
of a PEP 517 compliant one.
* gnu/packages/aux-files/python/sanity-check.py: Handle the FileNotFoundError
whe attempting to read the 'top_level.txt' metadata file of the package.
Remove extraneous 'continue' statement.
This is a followup to commit 8727870ff4.
* gnu/packages/aux-files/linux-libre/5.9-arm.conf,
gnu/packages/aux-files/linux-libre/5.9-arm64.conf,
gnu/packages/aux-files/linux-libre/5.9-i686.conf,
gnu/packages/aux-files/linux-libre/5.9-x86_64.conf: Delete files.
* Makefile.am (AUX_FILES): Remove them.
Add a new phase validating the usability of installed Python packages.
* gnu/packages/aux-files/python/sanity-check.py: New file.
* Makefile.am (AUX_FILES): Register it.
* guix/build-system/python.scm (sanity-check.py): New variable.
(lower): Add the script as an implicit input.
* guix/build/python-build-system.scm: Remove trailing #t.
(sanity-check): New phase.
(%standard-phases): Use it.
* tests/builders.scm: (make-python-dummy)
(dummy-ok, dummy-dummy-nosetuptools, dummy-fail-requirements)
(dummy-fail-import, dummy-fail-console-script): New variables.
("python-build-system: dummy-ok")
("python-build-system: dummy-dummy-nosetuptools")
("python-build-system: dummy-fail-requirements")
("python-build-system: dummy-fail-import")
("python-build-system: dummy-fail-console-script"): Add tests.
Using PYTHONPATH as a mean to discover the Python packages had the following
issues:
1. It is not versioned, so different versions of Python would clash if
installed in a shared profile.
2. It would interfere with the host Python site on foreign
distributions, sometimes preventing a a user to login their GDM
session (!).
3. It would take precedence over user installed Python packages
installed through pip.
4. It would leak into Python virtualenvs, which are supposed to create
isolated Python environments.
This changes fixes the above issues by making use of a sitecustomize.py
module. The newly introduced GUIX_PYTHONPATH environment variable is read
from the environment, filtered for the current Python version of the
interpreter, and spliced in 'sys.path' just before Python's own site location,
which provides the expected behavior.
* gnu/packages/aux-files/python/sitecustomize.py: New file.
* Makefile.am: Register it.
* gnu/packages/python.scm (customize-site)
(guix-pythonpath-search-path): New procedures.
(python-2.7)[phases]{install-sitecustomize.py}: New phase.
[native-inputs]{sitecustomize.py}: New input.
[native-search-paths]: Replace PYTHONPATH with GUIX_PYTHONPATH.
(python-3.9)[native-search-paths]: Likewise.
[phases]{install-sitecustomize}: Override with correct version.
[native-search-paths]: Replace PYTHONPATH with GUIX_PYTHONPATH.
* gnu/packages/commencement.scm (python-boot0):
[phases]{install-sitecustomize}: Likewise.
[native-inputs]{sitecustomize.py}: New input.
[native-search-paths]: Replace PYTHONPATH with GUIX_PYTHONPATH.
* guix/build/python-build-system.scm (site-packages): Do not add a trailing
'/'.
squash! gnu: python: Replace PYTHONPATH by GUIX_PYTHONPATH.
* gnu/packages/vim.scm (vim)[arguments]: Add new 'install-guix.vim phase
to install vendor specific vimrc.
* gnu/packages/aux-files/guix.vim: New file.
* Makefile.am (AUX_FILES): Register it.
When starting the 'guix' command, this ensures Guile modules are
immediately found instead of being search for in other directories.
This reduces the number of 'stat' calls during startup when
GUILE_LOAD_PATH is set to (almost) that of "env -i $(type -P guix)".
* gnu/packages/aux-files/guile-launcher.c (load_path)
(load_compiled_path): New variables.
(inner_main): Restore GUILE_LOAD_PATH and GUILE_LOAD_COMPILED_PATH and
set %load-path and %load-compiled-path accordingly.
(main): Save GUILE_LOAD_PATH and GUILE_LOAD_COMPILED_PATH and unset them.
Fixes <https://bugs.gnu.org/44261>.
Reported by Jan Nieuwenhuizen <janneke@gnu.org>.
* gnu/packages/aux-files/run-in-namespace.c (exec_in_user_namespace):
Add call to 'prctl'. Call 'mount' for NEW_ROOT and define 'is_tmpfs'.
When IS_TMPFS is true, call 'umount' and 'rmdir' after 'waitpid';
otherwise, call 'rm_rf' only when 'waitpid' returns -1 the second time.
(exec_with_loader): Call 'prctl'. Remove NEW_ROOT only when 'waitpid'
returns -1 the second time, otherwise leave it behind.
* tests/guix-pack-relocatable.sh (wait_for_file): New function.
Add test.
Fixes wrapping of non-package things, where the target store directory may
differ in length from the original.
* guix/scripts/pack.scm (wrapped-package)<build-wrapper>: Define
WRAPPER_PROGRAM macro with wrapper's file name.
* gnu/packages/aux-files/run-in-namespace.c (main): Offset index by len of
that file name.
Since commit ba48895899, selected UTF-8
locales are bundled. However, because 'guix-command' is itself a Guile
script, users would still see Guile's warning, particularly on foreign
distros:
$ LC_ALL=sdf guix foo
guile: warning: failed to install locale
hint: Consider installing the `glibc-utf8-locales' [...]
User commands would print that warning, but more importantly, each
invocation of 'guix substitute' would print it, even though
'guix-daemon.service' explicitly chooses "en_US.utf8", which is in
'glibc-utf8-locales'. This leads to confusion since users would keep
seeing this message unless/until they realize they also need to install
'glibc-utf8-locales' in root's profile.
This patch gets rid of "guile: warning: ..." for a guix-pulled 'guix'
command.
* guix/self.scm (specification->package): Add "gcc-toolchain".
(quiet-guile): New procedure.
(guix-command): Use it.
* gnu/packages/aux-files/guile-launcher.c: New file.
* Makefile.am (AUX_FILES): Add it.
