cpet/openbsd-ports
1
0
Fork 0
Code Issues Pull Requests Packages Projects Releases Wiki Activity
fc97b432ed
openbsd-ports/infrastructure/mk/bsd.port.mk
marc 95a5061506 Fix library dependency test for arch-es that don't 
suppport shared libs so building tk80, for example, doesn't
cause tkl80 to get built even thouth it
is already installed.  Update list-distfiles target
1999-04-06 19:14:41 +00:00

2348 lines
74 KiB
Makefile
Raw Blame History

#-*- mode: Fundamental; tab-width: 4; -*-
# ex:ts=4
# $OpenBSD: bsd.port.mk,v 1.83 1999/04/06 19:14:41 marc Exp $
#
# bsd.port.mk - 940820 Jordan K. Hubbard.
# This file is in the public domain.
#
# FreeBSD Id: bsd.port.mk,v 1.264 1996/12/25 02:27:44 imp Exp
# $NetBSD: bsd.port.mk,v 1.62 1998/04/09 12:47:02 hubertf Exp $
#
# Please view me with 4 column tabs!
# There are two different types of "maintainers" in the whole ports
# framework concept. Maintainers of the bsd.port*.mk files
# are listed below in the ${OPSYS}_MAINTAINER entries (this file
# is used by multiple *BSD flavors). You should consult them directly
# if you have any questions/suggestions regarding this file since only
# they are allowed to modify the master copies in the CVS repository!
# For each port, the MAINTAINER variable is what you should consult for
# contact information on the person(s) to contact if you have questions/
# suggestions about that specific port. By default (if no MAINTAINER
# is listed), a port is maintained by the subscribers of the ports@openbsd.org
# mailing list, and any correspondence should be directed there.
#
OpenBSD_MAINTAINER= marc@OpenBSD.ORG
# NEED_VERSION: we need at least this version of bsd.port.mk for this
# port to build
FULL_REVISION=$$OpenBSD: bsd.port.mk,v 1.83 1999/04/06 19:14:41 marc Exp $$
.if defined(NEED_VERSION)
_VERSION_REVISION=${FULL_REVISION:M[0-9]*.*}
_VERSION=${_VERSION_REVISION:C/\..*//}
_REVISION=${_VERSION_REVISION:C/.*\.//}
_VERSION_NEEDED=${NEED_VERSION:C/\..*//}
_REVISION_NEEDED=${NEED_VERSION:C/.*\.//}
.BEGIN:
@if [ ${_VERSION_NEEDED} -gt ${_VERSION} -o \
${_VERSION_NEEDED} -eq ${_VERSION} -a \
${_REVISION_NEEDED} -gt ${_REVISION} ]; \
then \
${ECHO} "Need version ${NEED_VERSION} of bsd.port.mk"; \
${FALSE}; \
fi;
.endif
# Supported Variables and their behaviors:
#
# Variables that typically apply to all ports:
#
# ONLY_FOR_ARCHS - If a port only makes sense to certain architectures, this
# is a list containing the names for them. It is checked
# against the predefined ${MACHINE_ARCH} value
# ARCH - The architecture (default: "uname -m").
# OPSYS - The operating system (default: "uname -s").
# OPSYS_VER - The current version of the operating system
# (default: "uname -r").
# PORTSDIR - The root of the ports tree. Defaults: /usr/ports
# DISTDIR - Where to get gzip'd, tarballed copies of original sources.
# (default: ${PORTSDIR}/distfiles).
# PREFIX - Where to install things in general (default: /usr/local).
# MASTER_SITES - Primary location(s) for distribution files if not found
# locally.
# MASTER_SITE_SUBDIR - Directory that "%SUBDIR%" in MASTER_SITES is
# replaced by.
# PATCH_SITES - Primary location(s) for distribution patch files
# (see PATCHFILES below) if not found locally.
# PATCH_SITE_SUBDIR - Directory that "%SUBDIR%" in PATCH_SITES is
# replaced by.
#
# MASTER_SITE_BACKUP - Backup location(s) for distribution files and patch
# files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
# (default:
# ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/
# ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/
# ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/)
# MASTER_SITE_OVERRIDE - If set, override the MASTER_SITES setting with this
# value.
# MASTER_SITE_OPENBSD - If set, only use ftp.openbsd.org as the
# MASTER_SITE_OVERRIDE.
# PACKAGES - A top level directory where all packages go (rather than
# going locally to each port). (default: ${PORTSDIR}/packages).
# GMAKE - Set to path of GNU make if not in $PORTPATH (default: gmake).
# XMKMF - Set to path of `xmkmf' if not in $PORTPATH
# (default: xmkmf -a ).
# MAINTAINER - The e-mail address of the contact person for this port
# Defaults: ports@OpenBSD.ORG
# CATEGORIES - A list of descriptive categories into which this port falls.
# WRKOBJDIR - A top level directory where, if defined, the separate working
# directories will get created, and symbolically linked to from
# ${WRKDIR} (see below). This is useful for building ports on
# several architectures, then ${PORTSDIR} can be NFS-mounted
# while ${WRKOBJDIR} is local to every arch
# PREFERRED_CIPHERS
# - a list of the form cipher.sig of programs to use to check
# recorded checksums, in order of decreasing trust.
# (default to using sha1, then rmd160, then md5).
#
# Variables that typically apply to an individual port. Non-Boolean
# variables without defaults are *mandatory*.
#
# WRKDIR - A temporary working directory that gets *clobbered* on clean
# (default: ${.CURDIR}/work).
# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually
# unpacks to. (Default: ${WRKDIR}/${DISTNAME} unless
# NO_WRKSUBDIR is set, in which case simply ${WRKDIR}).
# WRKBUILD - The directory where the port is actually built, useful for
# ports that need a separate directory (default: ${WRKSRC}).
# This is intended for GNU configure.
# SEPARATE_BUILD
# - define if the port can build in directory separate from
# WRKSRC. This redefines WRKBUILD to be arch-dependent,
# along with the configure, build and install cookies
# DISTNAME - Name of port or distribution.
# DISTFILES - Name(s) of archive file(s) containing distribution
# (default: ${DISTNAME}${EXTRACT_SUFX}).
# PATCHFILES - Name(s) of additional files that contain distribution
# patches (default: none). make will look for them at
# PATCH_SITES (see above). They will automatically be
# uncompressed before patching if the names end with
# ".gz" or ".Z".
# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES}
# and ${PATCHFILES} will be put in this subdirectory of
# ${DISTDIR}. Also they will be fetched in this subdirectory
# from FreeBSD mirror sites.
# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}.
# MIRROR_DISTFILE - Whether the distfile is redistributable without restrictions.
# Defaults to "yes", set this to "no" if restrictions exist.
# IGNOREFILES - If some of the ${ALLFILES} are not checksum-able, set
# this variable to their names.
# PKGNAME - Name of the package file to create if the DISTNAME
# isn't really relevant for the port/package
# (default: ${DISTNAME}).
# EXTRACT_ONLY - If defined, a subset of ${DISTFILES} you want to
# actually extract.
# PATCHDIR - A directory containing any additional patches you made
# to port this software to OpenBSD (default:
# ${.CURDIR}/patches)
# PATCH_LIST - list of patches to apply, can include wildcards (default:
# patch-*)
# SCRIPTDIR - A directory containing any auxiliary scripts
# (default: ${.CURDIR}/scripts)
# FILESDIR - A directory containing any miscellaneous additional files.
# (default: ${.CURDIR}/files)
# PKGDIR - A direction containing any package creation files.
# (default: ${.CURDIR}/pkg)
# PKG_DBDIR - Where package installation is recorded (default: /var/db/pkg)
# FORCE_PKG_REGISTER - If set, it will overwrite any existing package
# registration information in ${PKG_DBDIR}/${PKGNAME}.
# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from
# the "install" target.
# MTREE_FILE - The name of the mtree file (default: /etc/mtree/BSD.x11.dist
# if USE_IMAKE or USE_X11 is set, /etc/mtree/BSD.local.dist
# otherwise.)
# COMES_WITH - The first version that a port was made part of the
# standard OpenBSD distribution. If the current OpenBSD
# version is >= this version then a notice will be
# displayed instead the port being generated.
#
# NO_BUILD - Use a dummy (do-nothing) build target.
# NO_CONFIGURE - Use a dummy (do-nothing) configure target.
# NO_CDROM - Port may not go on CDROM. Set this string to reason.
# NO_DESCRIBE - Use a dummy (do-nothing) describe target.
# NO_EXTRACT - Use a dummy (do-nothing) extract target.
# NO_INSTALL - Use a dummy (do-nothing) install target.
# NO_PACKAGE - Use a dummy (do-nothing) package target.
# NO_PKG_REGISTER - Don't register a port install as a package.
# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}.
# NO_WRKDIR - There's no work directory at all; port does this someplace
# else.
# NO_DEPENDS - Don't verify build of dependencies.
# NOCLEANDEPENDS - Don't nuke dependent dirs on make clean (Default: yes)
# BROKEN - Port is broken. Set this string to the reason why.
# RESTRICTED - Port is restricted. Set this string to the reason why.
# USE_GMAKE - Says that the port uses gmake.
#
# XXX: cygnus products do NOT use autoconf for making its main
# configure from configure.in
# USE_AUTOCONF - Says that the port uses autoconf (implies GNU_CONFIGURE).
# AUTOCONF_DIR - Where to apply autoconf (default: ${WRKSRC}).
# USE_PERL5 - Says that the port uses perl5 for building and running.
# USE_IMAKE - Says that the port uses imake.
# USE_X11 - Says that the port uses X11 (i.e., installs in ${X11BASE}).
# USE_EGCC - Says that the port needs the egcs C compiler
# USE_EGXX - Says that the port needs the egcs C++ compiler
# NO_INSTALL_MANPAGES - For imake ports that don't like the install.man
# target.
# HAS_CONFIGURE - Says that the port has its own configure script.
# GNU_CONFIGURE - Set if you are using GNU configure (optional).
# CONFIGURE_SCRIPT - Name of configure script, defaults to 'configure'.
# CONFIGURE_ARGS - Pass these args to configure if ${HAS_CONFIGURE} is set.
# CONFIGURE_SHARED - An argument to GNU configure that expands to
# --enable-shared for those architectures that support
# shared libraries and --disable-shared for architectures
# that do not support shared libraries.
# CONFIGURE_ENV - Pass these env (shell-like) to configure if
# ${HAS_CONFIGURE} is set.
# SCRIPTS_ENV - Additional environment vars passed to scripts in
# ${SCRIPTDIR} executed by bsd.port.mk.
# MAKE_ENV - Additional environment vars passed to sub-make in build
# stage.
# IS_INTERACTIVE - Set this if your port needs to interact with the user
# during a build. User can then decide to skip this port by
# setting ${BATCH}, or compiling only the interactive ports
# by setting ${INTERACTIVE}.
# FETCH_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends in the "fetch" stage. "path" is the
# name of a file if it starts with a slash (/), an
# executable otherwise. make will test for the
# existence (if it is a full pathname) or search for
# it in $PORTPATH (if it is an executable) and go
# into "dir" to do a "make all install" if it's not
# found.
# BUILD_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends to build (between the "extract" and
# "build" stages, inclusive). The test done to
# determine the existence of the dependency is the
# same as FETCH_DEPENDS.
# RUN_DEPENDS - A list of "path:dir" pairs of other ports this
# package depends to run. The test done to determine
# the existence of the dependency is the same as
# FETCH_DEPENDS. This will be checked during the
# "install" stage and the name of the dependency will
# be put into the package as well.
# LIB_DEPENDS - A list of "lib:dir" pairs of other ports this package
# depends on. "lib" is the name of a shared library.
# make will use "ldconfig -r" to search for the
# library. Note that lib can be any regular expression.
# In older versions of this file, you need two backslashes
# in front of dots (.) to supress its special meaning (e.g.,
# use "foo\\.2\\.:${PORTSDIR}/utils/foo" to match "libfoo.2.*").
# No special backslashes are needed to escape regular
# expression metacharacters in OpenBSD, and the old backslash
# escapes are recognised for backwards compatibility.
# DEPENDS - A list of other ports this package depends on being
# made first. Use this for things that don't fall into
# the above two categories.
# EXTRACT_CMD - Command for extracting archive (default: tar).
# EXTRACT_SUFX - Suffix for archive names (default: .tar.gz).
# EXTRACT_BEFORE_ARGS -
# Arguments to ${EXTRACT_CMD} before filename
# (default: -xzf).
# EXTRACT_AFTER_ARGS -
# Arguments to ${EXTRACT_CMD} following filename
# (default: none).
#
# FETCH_CMD - Full path to ftp/http fetch command if not in $PORTPATH
# (default: /usr/bin/ftp).
# FETCH_BEFORE_ARGS -
# Arguments to ${FETCH_CMD} before filename (default: none).
# FETCH_AFTER_ARGS -
# Arguments to ${FETCH_CMD} following filename (default: none).
# NO_IGNORE - Set this to YES (most probably in a "make fetch" in
# ${PORTSDIR}) if you want to fetch all distfiles,
# even for packages not built due to limitation by
# absent X or Motif or ONLY_FOR_ARCHS...
# NO_WARNINGS - Set this to YES to disable warnings regarding variables
# to define to control the build. Automatically set
# from the "mirror-distfiles" target.
# ALL_TARGET - The target to pass to make in the package when building.
# (default: "all")
# INSTALL_TARGET- The target to pass to make in the package when installing.
# (default: "install")
#
# Motif support:
#
# USE_MOTIF - Set this in your port if it requires Motif or Lesstif.
# It will be built using Lesstif port unless Motif libraries
# found or HAVE_MOTIF is defined. See also REQUIRES_MOTIF.
#
# REQUIRES_MOTIF- Set this in your port if it requires Motif. It will be
# built only if HAVE_MOTIF is set.
# HAVE_MOTIF - If set, means system has Motif. Typically set in /etc/mk.conf.
# MOTIF_STATIC - If set, link libXm statically; otherwise, link it
# dynamically. Typically set in /etc/mk.conf.
# MOTIFLIB - Set automatically to appropriate value depending on
# ${MOTIF_STATIC}. Substitute references to -lXm with
# patches to make your port conform to our standards.
# MOTIF_ONLY - If set, build Motif ports only. (Not much use except for
# building packages.)
#
# Variables to change if you want a special behavior:
#
# ECHO_MSG - Used to print all the '===>' style prompts - override this
# to turn them off (default: /bin/echo).
# DEPENDS_TARGET - The target to execute when a port is calling a
# dependency (default: "install").
# PATCH_DEBUG - If set, print out more information about the patches as
# it attempts to apply them.
#
# Variables that serve as convenient "aliases" for your *-install targets.
# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
#
# INSTALL_PROGRAM - A command to install binary executables.
# INSTALL_SCRIPT - A command to install executable scripts.
# INSTALL_DATA - A command to install sharable data.
# INSTALL_MAN - A command to install manpages (doesn't compress).
# INSTALL_PROGRAM_DIR - Create a directory for storing programs
# INSTALL_SCRIPT_DIR - Create a directory for storing scripts (alias for
# (INSTALL_PROGRAM_DIR)
# INSTALL_DATA_DIR - Create a directory for storing arbitrary data
# INSTALL_MAN_DIR - Create a directory for storing man pages
#
# It is assumed that the port installs manpages uncompressed. If this is
# not the case, set MANCOMPRESSED in the port and define MAN<sect> and
# CAT<sect> for the compressed pages. The pages will then be automagically
# uncompressed.
#
# MANCOMPRESSED - Indicates that the port installs manpages in a compressed
# form (default: port installs manpages uncompressed).
# MAN<sect> - A list of manpages, categorized by section. For
# example, if your port has "man/man1/foo.1" and
# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
# The available sections chars are "123456789LN".
# CAT<sect> - The same as MAN<sect>, only for formatted manpages.
# MANPREFIX -The directory prefix for ${MAN<sect>} (default: ${PREFIX}).
# CATPREFIX - The directory prefix for ${CAT<sect>} (default: ${PREFIX}).
#
# Other variables:
#
# NO_SHARED_LIBS - defined as "yes" for those machine architectures that do
# not support shared libraries. WARNING: This value is
# NOT defined until AFTER ".include bsd.port.mk". Thus
# you can NOT use something like ".if defined(NO_SHARED_LIBS)"
# before this file is included.
#
# Default targets and their behaviors:
#
# fetch - Retrieves ${DISTFILES} (and ${PATCHFILES} if defined)
# into ${DISTDIR} as necessary.
# fetch-list - Show list of files that would be retrieved by fetch
# extract - Unpacks ${DISTFILES} into ${WRKDIR}.
# patch - Apply any provided patches to the source.
# configure - Runs either GNU configure, one or more local configure
# scripts or nothing, depending on what's available.
# build - Actually compile the sources.
# install - Install the results of a build.
# reinstall - Install the results of a build, ignoring "already installed"
# flag.
# deinstall - Remove the installation. Alias: uninstall
# plist - create a file suitable for use as a packing list. This
# is for port maintainers.
# package - Create a package from an _installed_ port.
# describe - Try to generate a one-line description for each port for
# use in INDEX files and the like.
# checkpatch - Do a "patch -C" instead of a "patch". Note that it may
# give incorrect results if multiple patches deal with
# the same file.
# checksum - Use ${CHECKSUM_FILE} to ensure that your distfiles are valid.
# makesum - Generate ${CHECKSUM_FILE} (only do this for your own ports!).
# addsum - update ${CHECKSUM_FILE} in a non-destructive way
# (your own ports only!)
# readme - Create a README.html file describing the category or package
# mirror-distfiles - Mirror the distfile(s) if they are freely redistributable
# Setting MIRROR_DISTFILE to "no" in the package Makefile
# will override the default "yes", and the distfile will
# not be fetched.
# list-distfiles- list the distribution and patch files used by a port.
# Typical use is (from the top level of the ports tree)
# make ECHO_MSG=: list-distfiles | tee some-file
# obj - pre-build ${WRKDIR} -> ${WRKOBJDIR}/${PORTSUBDIR} links
#
# Default sequence for "all" is: fetch checksum extract patch configure build
#
# Please read the comments in the targets section below, you
# should be able to use the pre-* or post-* targets/scripts
# (which are available for every stage except checksum) or
# override the do-* targets to do pretty much anything you want.
#
# NEVER override the "regular" targets unless you want to open
# a major can of worms.
# Get the architecture
ARCH!= uname -m
# Get the operating system type and version
OPSYS!= uname -s
OPSYS_VER!= uname -r
.if exists(${.CURDIR}/../Makefile.inc)
.include "${.CURDIR}/../Makefile.inc"
.endif
# Define SUPPORT_SHARES for those machines that support shared libraries.
#
.if (${MACHINE_ARCH} == "alpha") || (${MACHINE_ARCH} == "powerpc") || \
(${MACHINE_ARCH} == "vax") || (${MACHINE_ARCH} == "hppa")
NO_SHARED_LIBS= yes
.endif
NOCLEANDEPENDS= yes
NOMANCOMPRESS?= yes
DEF_UMASK?= 022
.if exists(${.CURDIR}/Makefile.${ARCH}-${OPSYS})
.include "${.CURDIR}/Makefile.${ARCH}-${OPSYS}"
.elif exists(${.CURDIR}/Makefile.${OPSYS})
.include "${.CURDIR}/Makefile.${OPSYS}"
.elif exists(${.CURDIR}/Makefile.${ARCH})
.include "${.CURDIR}/Makefile.${ARCH}"
.endif
# These need to be absolute since we don't know how deep in the ports
# tree we are and thus can't go relative. They can, of course, be overridden
# by individual Makefiles or local system make configuration.
PORTSDIR?= /usr/ports
LOCALBASE?= ${DESTDIR}/usr/local
X11BASE?= ${DESTDIR}/usr/X11R6
DISTDIR?= ${PORTSDIR}/distfiles
_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR}
PACKAGES?= ${PORTSDIR}/packages
TEMPLATES?= ${PORTSDIR}/templates
.if exists(${.CURDIR}/patches.${ARCH}-${OPSYS})
PATCHDIR?= ${.CURDIR}/patches.${ARCH}-${OPSYS}
.elif exists(${.CURDIR}/patches.${OPSYS})
PATCHDIR?= ${.CURDIR}/patches.${OPSYS}
.elif exists(${.CURDIR}/patches.${ARCH})
PATCHDIR?= ${.CURDIR}/patches.${ARCH}
.else
PATCHDIR?= ${.CURDIR}/patches
.endif
PATCH_LIST?= patch-*
.if exists(${.CURDIR}/scripts.${ARCH}-${OPSYS})
SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}-${OPSYS}
.elif exists(${.CURDIR}/scripts.${OPSYS})
SCRIPTDIR?= ${.CURDIR}/scripts.${OPSYS}
.elif exists(${.CURDIR}/scripts.${ARCH})
SCRIPTDIR?= ${.CURDIR}/scripts.${ARCH}
.else
SCRIPTDIR?= ${.CURDIR}/scripts
.endif
.if exists(${.CURDIR}/files.${ARCH}-${OPSYS})
FILESDIR?= ${.CURDIR}/files.${ARCH}-${OPSYS}
.elif exists(${.CURDIR}/files.${OPSYS})
FILESDIR?= ${.CURDIR}/files.${OPSYS}
.elif exists(${.CURDIR}/files.${ARCH})
FILESDIR?= ${.CURDIR}/files.${ARCH}
.else
FILESDIR?= ${.CURDIR}/files
.endif
.if exists(${.CURDIR}/pkg.${ARCH}-${OPSYS})
PKGDIR?= ${.CURDIR}/pkg.${ARCH}-${OPSYS}
.elif exists(${.CURDIR}/pkg.${OPSYS})
PKGDIR?= ${.CURDIR}/pkg.${OPSYS}
.elif exists(${.CURDIR}/pkg.${ARCH})
PKGDIR?= ${.CURDIR}/pkg.${ARCH}
.else
PKGDIR?= ${.CURDIR}/pkg
.endif
.if defined(USE_IMAKE) || defined(USE_X11)
PREFIX?= ${X11BASE}
.else
PREFIX?= ${LOCALBASE}
.endif
# where configuration files should go
SYSCONFDIR?= /etc
# The following 4 lines should go away as soon as the ports are all updated
.if defined(EXEC_DEPENDS)
BUILD_DEPENDS+= ${EXEC_DEPENDS}
RUN_DEPENDS+= ${EXEC_DEPENDS}
.endif
.if defined(USE_GMAKE)
BUILD_DEPENDS+= ${GMAKE}:${PORTSDIR}/devel/gmake
MAKE_PROGRAM= ${GMAKE}
.else
MAKE_PROGRAM= ${MAKE}
.endif
.if defined(USE_AUTOCONF)
GNU_CONFIGURE= yes
BUILD_DEPENDS+= ${AUTOCONF}:${PORTSDIR}/devel/autoconf
AUTOCONF_DIR?=${WRKSRC}
# missing ?= not an oversight
AUTOCONF_ENV=PATH=${PORTPATH}
.endif
.if defined(USE_EGCC)
BUILD_DEPENDS+= ${EGCC}:${PORTSDIR}/devel/egcs-stable
CC=${EGCC}
.endif
.if defined(USE_EGXX)
BUILD_DEPENDS+= ${EGXX}:${PORTSDIR}/devel/egcs-stable
CXX=${EGXX}
.endif
.if defined(USE_MOTIF) && !defined(HAVE_MOTIF) && !defined(REQUIRES_MOTIF)
LIB_DEPENDS+= Xm.:${PORTSDIR}/x11/lesstif
.endif
.if exists(${PORTSDIR}/../Makefile.inc)
.include "${PORTSDIR}/../Makefile.inc"
.endif
EXTRACT_COOKIE?= ${WRKDIR}/.extract_done
PATCH_COOKIE?= ${WRKDIR}/.patch_done
.if defined(SEPARATE_BUILD)
CONFIGURE_COOKIE?= ${WRKBUILD}/.configure_done
INSTALL_PRE_COOKIE?=${WRKBUILD}/.install_started
INSTALL_COOKIE?= ${WRKBUILD}/.install_done
BUILD_COOKIE?= ${WRKBUILD}/.build_done
PACKAGE_COOKIE?= ${WRKBUILD}/.package_done
.else
CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done
INSTALL_PRE_COOKIE?=${WRKDIR}/.install_started
INSTALL_COOKIE?= ${WRKDIR}/.install_done
BUILD_COOKIE?= ${WRKDIR}/.build_done
PACKAGE_COOKIE?= ${WRKDIR}/.package_done
.endif
# Miscellaneous overridable commands:
GMAKE?= gmake
AUTOCONF?= autoconf
EGCC?= egcc
EGXX?= eg++
XMKMF?= xmkmf -a
# be paranoid about which ciphers we trust
.if exists(/sbin/md5)
MD5?= /sbin/md5
.elif exists(/bin/md5)
MD5?= /bin/md5
.elif exists(/usr/bin/md5)
MD5?= /usr/bin/md5
.else
MD5?= md5
.endif
.if exists(/sbin/sha1)
SHA1?= /sbin/sha1
.elif exists(/bin/sha1)
SHA1?= /bin/sha1
.elif exists(/usr/bin/sha1)
SHA1?= /usr/bin/sha1
.else
SHA1?= sha1
.endif
.if exists(/sbin/rmd160)
RMD160?= /sbin/rmd160
.elif exists(/bin/rmd160)
RMD160?= /bin/rmd160
.elif exists(/usr/bin/rmd160)
RMD160?= /usr/bin/rmd160
.else
RMD160?= rmd160
.endif
# Compatibility game
MD5_FILE?= ${FILESDIR}/md5
CHECKSUM_FILE?= ${MD5_FILE}
# Don't touch !!! Used for generating checksums.
CIPHERS= ${SHA1}.SHA1 ${RMD160}.RMD160 ${MD5}.MD5
# This is the one you can override
PREFERRED_CIPHERS?= ${CIPHERS}
PORTPATH?= /usr/bin:/bin:/usr/sbin:/sbin:${LOCALBASE}/bin:${X11BASE}/bin
# Add any COPTS to CFLAGS. Note: programs that use imake do not
# use CFLAGS! Also, many (most?) ports hard code CFLAGS, ignoring
# what we pass in.
CFLAGS+= ${COPTS}
MAKE_FLAGS?= -f
MAKEFILE?= Makefile
MAKE_ENV+= PATH=${PORTPATH} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} MOTIFLIB="${MOTIFLIB}" CFLAGS="${CFLAGS}"
.if exists(/usr/bin/fetch)
FETCH_CMD?= /usr/bin/fetch
.else
FETCH_CMD?= /usr/bin/ftp
.endif
# By default, distfiles have no restrictions placed on them
MIRROR_DISTFILE?= yes
TOUCH?= /usr/bin/touch
TOUCH_FLAGS?= -f
PATCH?= /usr/bin/patch
PATCH_STRIP?= -p0
PATCH_DIST_STRIP?= -p0
.if defined(PATCH_DEBUG)
PATCH_DEBUG_TMP= yes
PATCH_ARGS?= -d ${WRKSRC} -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} -E ${PATCH_DIST_STRIP}
.else
PATCH_DEBUG_TMP= no
PATCH_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_STRIP}
PATCH_DIST_ARGS?= -d ${WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
.endif
.if defined(BATCH)
PATCH_ARGS+= --batch
PATCH_DIST_ARGS+= --batch
.endif
.if defined(PATCH_CHECK_ONLY)
PATCH_ARGS+= -C
PATCH_DIST_ARGS+= -C
.endif
.if exists(/bin/tar)
EXTRACT_CMD?= /bin/tar
.else
EXTRACT_CMD?= /usr/bin/tar
.endif
# Backwards compatability.
.if defined(EXTRACT_ARGS)
EXTRACT_BEFORE_ARGS?= ${EXTRACT_ARGS}
.else
EXTRACT_BEFORE_ARGS?= -xzf
.endif
EXTRACT_SUFX?= .tar.gz
# Figure out where the local mtree file is
.if !defined(MTREE_FILE)
.if defined(USE_IMAKE) || defined(USE_X11)
MTREE_FILE= /etc/mtree/BSD.x11.dist
.else
MTREE_FILE= /etc/mtree/BSD.local.dist
.endif
.endif
MTREE_CMD?= /usr/sbin/mtree
MTREE_ARGS?= -U -f ${MTREE_FILE} -d -e -q -p
.include <bsd.own.mk>
MAKE_ENV+= EXTRA_SYS_MK_INCLUDES="<bsd.own.mk>"
.if !defined(NO_WRKDIR)
.if defined(OBJMACHINE)
WRKDIR?= ${.CURDIR}/work.${MACHINE_ARCH}
.else
WRKDIR?= ${.CURDIR}/work
.endif
.else
WRKDIR?= ${.CURDIR}
.endif
.if defined(NO_WRKSUBDIR)
WRKSRC?= ${WRKDIR}
.else
WRKSRC?= ${WRKDIR}/${DISTNAME}
.endif
.if defined(SEPARATE_BUILD)
WRKBUILD?= ${WRKDIR}/build-${ARCH}
.else
WRKBUILD?= ${WRKSRC}
.endif
.if defined(WRKOBJDIR)
__canonical_PORTSDIR!= cd ${PORTSDIR}; pwd -P
__canonical_CURDIR!= cd ${.CURDIR}; pwd -P
PORTSUBDIR= ${__canonical_CURDIR:S,${__canonical_PORTSDIR}/,,}
.endif
# A few aliases for *-install targets
INSTALL_PROGRAM= \
${INSTALL} ${INSTALL_COPY} ${INSTALL_STRIP} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_SCRIPT= \
${INSTALL} ${INSTALL_COPY} -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_DATA= \
${INSTALL} ${INSTALL_COPY} -o ${SHAREOWN} -g ${SHAREGRP} -m ${SHAREMODE}
INSTALL_MAN= \
${INSTALL} ${INSTALL_COPY} -o ${MANOWN} -g ${MANGRP} -m ${MANMODE}
INSTALL_PROGRAM_DIR= \
${INSTALL} -d -o ${BINOWN} -g ${BINGRP} -m ${BINMODE}
INSTALL_SCRIPT_DIR= \
${INSTALL_PROGRAM_DIR}
INSTALL_DATA_DIR= \
${INSTALL} -d -o ${SHAREOWN} -g ${SHAREGRP} -m ${BINMODE}
INSTALL_MAN_DIR= \
${INSTALL} -d -o ${MANOWN} -g ${MANGRP} -m ${BINMODE}
INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
BSD_INSTALL_DATA="${INSTALL_DATA}" \
BSD_INSTALL_MAN="${INSTALL_MAN}" \
BSD_INSTALL_PROGRAM_DIR="${INSTALL_PROGRAM_DIR}" \
BSD_INSTALL_SCRIPT_DIR="${INSTALL_SCRIPT_DIR}" \
BSD_INSTALL_DATA_DIR="${INSTALL_DATA_DIR}" \
BSD_INSTALL_MAN_DIR="${INSTALL_MAN_DIR}"
MAKE_ENV+= ${INSTALL_MACROS}
SCRIPTS_ENV+= ${INSTALL_MACROS}
# The user can override the NO_PACKAGE by specifying this from
# the make command line
.if defined(FORCE_PACKAGE)
.undef NO_PACKAGE
.endif
# Support architecture dependent packing lists
#
COMMENT?= ${PKGDIR}/COMMENT
DESCR?= ${PKGDIR}/DESCR
.if exists(${PKGDIR}/PLIST.${ARCH})
PLIST?= ${PKGDIR}/PLIST.${ARCH}
.else
.if defined(NO_SHARED_LIBS) && exists(${PKGDIR}/PLIST.noshared)
PLIST?= ${PKGDIR}/PLIST.noshared
.else
PLIST?= ${PKGDIR}/PLIST
.endif
.endif
PKG_CMD?= /usr/sbin/pkg_create
PKG_DELETE?= /usr/sbin/pkg_delete
.if !defined(PKG_ARGS)
PKG_ARGS= -v -c ${COMMENT} -d ${DESCR} -f ${PLIST} -p ${PREFIX} -P "`${MAKE} package-depends|sort -u`"
.if exists(${PKGDIR}/INSTALL)
PKG_ARGS+= -i ${PKGDIR}/INSTALL
.endif
.if exists(${PKGDIR}/DEINSTALL)
PKG_ARGS+= -k ${PKGDIR}/DEINSTALL
.endif
.if exists(${PKGDIR}/REQ)
PKG_ARGS+= -r ${PKGDIR}/REQ
.endif
.if exists(${PKGDIR}/MESSAGE)
PKG_ARGS+= -D ${PKGDIR}/MESSAGE
.endif
.if !defined(NO_MTREE)
PKG_ARGS+= -m ${MTREE_FILE}
.endif
.endif
PKG_SUFX?= .tgz
# where pkg_add records its dirty deeds.
PKG_DBDIR?= /var/db/pkg
# shared/dynamic motif libs
.if defined(USE_MOTIF) || defined(HAVE_MOTIF)
.if defined(MOTIF_STATIC)
MOTIFLIB?= ${X11BASE}/lib/libXm.a
.else
MOTIFLIB?= -L${X11BASE}/lib -lXm
.endif
.endif
AWK?= /usr/bin/awk
BASENAME?= /usr/bin/basename
CAT?= /bin/cat
CP?= /bin/cp
DIRNAME?= /usr/bin/dirname
ECHO?= /bin/echo
EXPR?= /bin/expr
FALSE?= /usr/bin/false
FILE?= /usr/bin/file
GREP?= /usr/bin/grep
GUNZIP_CMD?= /usr/bin/gunzip -f
GZCAT?= /usr/bin/gzcat
GZIP?= -9
GZIP_CMD?= /usr/bin/gzip -nf ${GZIP}
LDCONFIG?= [ ! -x /sbin/ldconfig ] || /sbin/ldconfig
LN?= /bin/ln
M4?= /usr/bin/m4
MKDIR?= /bin/mkdir -p
MV?= /bin/mv
READLINK?= /usr/bin/readlink
RM?= /bin/rm
RMDIR?= /bin/rmdir
SED?= /usr/bin/sed
# XXX ${SETENV} is needed in front of var=value lists whenever the next
# command is expanded from a variable, as this could be a shell construct
SETENV?= /usr/bin/env
SH?= /bin/sh
TR?= /usr/bin/tr
TRUE?= /usr/bin/true
# Used to print all the '===>' style prompts - override this to turn them off.
ECHO_MSG?= ${ECHO}
# How to do nothing. Override if you, for some strange reason, would rather
# do something.
DO_NADA?= ${TRUE}
ALL_TARGET?= all
INSTALL_TARGET?= install
.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES)
INSTALL_TARGET+= install.man
.endif
# Popular master sites
MASTER_SITE_XCONTRIB+= \
ftp://crl.dec.com/pub/X11/contrib/%SUBDIR%/ \
ftp://ftp.eu.net/X11/contrib/%SUBDIR%/ \
ftp://ftp.uni-paderborn.de/pub/X11/contrib/%SUBDIR%/ \
ftp://ftp.x.org/contrib/%SUBDIR%/
MASTER_SITE_GNU+= \
ftp://prep.ai.mit.edu/pub/gnu/%SUBDIR%/ \
ftp://wuarchive.wustl.edu/systems/gnu/%SUBDIR%/
MASTER_SITE_PERL_CPAN+= \
ftp://ftp.digital.com/pub/plan/perl/CPAN/modules/by-module/%SUBDIR%/ \
ftp://ftp.cdrom.com/pub/perl/CPAN/modules/by-module/%SUBDIR%/
MASTER_SITE_TEX_CTAN+= \
ftp://ftp.cdrom.com/pub/tex/ctan/%SUBDIR%/ \
ftp://wuarchive.wustl.edu/packages/TeX/%SUBDIR%/ \
ftp://ftp.funet.fi/pub/TeX/CTAN/%SUBDIR%/ \
ftp://ftp.tex.ac.uk/public/ctan/tex-archive/%SUBDIR%/ \
ftp://ftp.dante.de/tex-archive/%SUBDIR%/
MASTER_SITE_SUNSITE+= \
ftp://metalab.unc.edu/pub/Linux/%SUBDIR%/ \
ftp://ftp.infomagic.com/pub/mirrors/linux/sunsite/%SUBDIR%/ \
ftp://ftp.funet.fi/pub/mirrors/sunsite.unc.edu/pub/Linux/%SUBDIR%/ \
ftp://ftp.lip6.fr/pub/linux/sunsite/%SUBDIR%
MASTER_SITE_KDE+= \
ftp://ftp.us.kde.org/pub/kde/%SUBDIR%/ \
ftp://ftp.kde.org/pub/kde/%SUBDIR%/ \
ftp://ftp.tuniv.szczecin.pl/pub/kde/%SUBDIR%/ \
ftp://ftp.fu-berlin.de/pub/unix/X11/gui/kde/%SUBDIR%/ \
ftp://ftp.dataplus.se/pub/linux/kde/%SUBDIR%/
MASTER_SITE_GNOME+= \
ftp://ftp.jimpick.com/pub/mirrors/gnome/%SUBDIR%/ \
ftp://ftp.geo.net/pub/gnome/%SUBDIR%/ \
ftp://gnomeftp.wgn.net/pub/gnome/%SUBDIR%/ \
ftp://ftp.gnome.org/pub/GNOME/%SUBDIR%/
# Empty declaration to avoid "variable MASTER_SITES recursive" error
MASTER_SITES?=
PATCH_SITES?=
# Substitute subdirectory names
_MASTER_SITES:= ${MASTER_SITES:S/%SUBDIR%/${MASTER_SITE_SUBDIR}/}
PATCH_SITES:= ${PATCH_SITES:S/%SUBDIR%/${PATCH_SITE_SUBDIR}/}
MASTER_SITES:= ${_MASTER_SITES}
# Two backup master sites, First one at ftp.openbsd.org
#
_MASTER_SITE_OPENBSD?= \
ftp://ftp.openbsd.org/pub/OpenBSD/distfiles/${DIST_SUBDIR}/ \
ftp://ftp.openbsd.org/pub/OpenBSD/licensed/${DIST_SUBDIR}/
# set the backup master sites.
#
MASTER_SITE_BACKUP?= \
${_MASTER_SITE_OPENBSD} \
ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/${DIST_SUBDIR}/
# If the user has this set, go to the OpenBSD repository for everything.
#
.if defined(MASTER_SITE_OPENBSD)
MASTER_SITE_OVERRIDE= ${_MASTER_SITE_OPENBSD}
.endif
# Where to put distfiles that don't have any other master site
# ;;; This is referenced in a few Makefiles -- I'd like to get rid of it
#
MASTER_SITE_LOCAL?= \
ftp://ftp.netbsd.org/pub/NetBSD/packages/distfiles/LOCAL_PORTS/ \
ftp://ftp.freebsd.org/pub/FreeBSD/distfiles/LOCAL_PORTS/
# I guess we're in the master distribution business! :) As we gain mirror
# sites for distfiles, add them to this list.
.if !defined(MASTER_SITE_OVERRIDE)
MASTER_SITES+= ${MASTER_SITE_BACKUP}
PATCH_SITES+= ${MASTER_SITE_BACKUP}
.else
MASTER_SITES:= ${MASTER_SITE_OVERRIDE} ${MASTER_SITES}
PATCH_SITES:= ${MASTER_SITE_OVERRIDE} ${PATCH_SITES}
.endif
# OpenBSD code to handle ports distfiles on a CDROM. The distfiles
# are located in /cdrom/distfiles/${DIST_SUBDIR}/ (assuming that the
# CDROM is mounted on /cdrom).
#
.if exists(/cdrom/distfiles)
CDROM_SITE:= /cdrom/distfiles/${DIST_SUBDIR}
.if defined(FETCH_SYMLINK_DISTFILES)
CDROM_COPY:= ${LN}
CDROM_OPT= -s
.else
CDROM_COPY:= ${CP}
CDROM_OPT= -f
.endif
.endif
# Derived names so that they're easily overridable.
DISTFILES?= ${DISTNAME}${EXTRACT_SUFX}
PKGNAME?= ${DISTNAME}
ALLFILES?= ${DISTFILES} ${PATCHFILES}
.if defined(IGNOREFILES)
CKSUMFILES!= \
for file in ${ALLFILES}; do \
ignore=0; \
for tmp in ${IGNOREFILES}; do \
if [ "$$file" = "$$tmp" ]; then \
ignore=1; \
fi; \
done; \
if [ "$$ignore" = 0 ]; then \
echo "$$file"; \
else \
echo ""; \
fi; \
done
.else
CKSUMFILES= ${ALLFILES}
.endif
# List of all files, with ${DIST_SUBDIR} in front. Used for checksum.
.if defined(DIST_SUBDIR)
_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
.else
_CKSUMFILES?= ${CKSUMFILES}
_IGNOREFILES?= ${IGNOREFILES}
.endif
# This is what is actually going to be extracted, and is overridable
# by user.
EXTRACT_ONLY?= ${DISTFILES}
# Documentation
MAINTAINER?= ports@OpenBSD.ORG
.if !defined(CATEGORIES)
.BEGIN:
@${ECHO_MSG} "CATEGORIES is mandatory."
@${FALSE}
.endif
# Note this has to start with a capital letter (or more accurately, it
# shouldn't match "[a-z]*"), see the target "delete-package-links" below.
PKGREPOSITORYSUBDIR?= All
PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR}
.if exists(${PACKAGES})
PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
.else
PKGFILE?= ${PKGNAME}${PKG_SUFX}
.endif
CONFIGURE_SCRIPT?= configure
.if defined(SEPARATE_BUILD)
_CONFIGURE_SCRIPT=${WRKSRC}/${CONFIGURE_SCRIPT}
.else
_CONFIGURE_SCRIPT=./${CONFIGURE_SCRIPT}
.endif
CONFIGURE_ENV+= PATH=${PORTPATH}
.if defined(GNU_CONFIGURE)
CONFIGURE_ARGS+= --prefix=${PREFIX}
CONFIGURE_ARGS+= --sysconfdir=${SYSCONFDIR}
HAS_CONFIGURE= yes
.endif
.if defined(NO_SHARED_LIBS)
CONFIGURE_SHARED?= --disable-shared
.else
CONFIGURE_SHARED?= --enable-shared
.endif
# Passed to most of script invocations
SCRIPTS_ENV+= CURDIR=${.CURDIR} DISTDIR=${DISTDIR} \
PATH=${PORTPATH} \
WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} WRKBUILD=${WRKBUILD} \
PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
PORTSDIR=${PORTSDIR} DEPENDS="${DEPENDS}" \
PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE}
.if defined(BATCH)
SCRIPTS_ENV+= BATCH=yes
.endif
MANPREFIX?= ${PREFIX}
CATPREFIX?= ${PREFIX}
.for sect in 1 2 3 4 5 6 7 8 9
MAN${sect}PREFIX?= ${MANPREFIX}
CAT${sect}PREFIX?= ${CATPREFIX}
.endfor
MANLPREFIX?= ${MANPREFIX}
MANNPREFIX?= ${MANPREFIX}
CATLPREFIX?= ${CATPREFIX}
CATNPREFIX?= ${CATPREFIX}
MANLANG?= "" # english only by default
.for lang in ${MANLANG}
.for sect in 1 2 3 4 5 6 7 8 9
.if defined(MAN${sect})
_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/man/${lang}/man${sect}/%}
.endif
.if defined(CAT${sect})
_CATPAGES+= ${CAT${sect}:S%^%${CAT${sect}PREFIX}/man/${lang}/cat${sect}/%}
.endif
.endfor
.if defined(MANL)
_MANPAGES+= ${MANL:S%^%${MANLPREFIX}/man/${lang}/manl/%}
.endif
.if defined(MANN)
_MANPAGES+= ${MANN:S%^%${MANNPREFIX}/man/${lang}/mann/%}
.endif
.if defined(CATL)
_CATPAGES+= ${CATL:S%^%${CATLPREFIX}/man/${lang}/catl/%}
.endif
.if defined(CATN)
_CATPAGES+= ${CATN:S%^%${CATNPREFIX}/man/${lang}/catn/%}
.endif
.endfor
.MAIN: all
################################################################
# Many ways to disable a port.
#
# If we're in BATCH mode and the port is interactive, or we're
# in interactive mode and the port is non-interactive, skip all
# the important targets. The reason we have two modes is that
# one might want to leave a build in BATCH mode running
# overnight, then come back in the morning and do _only_ the
# interactive ones that required your intervention.
#
# Don't attempt to build ports that require Motif if you don't
# have Motif.
#
# Ignore ports that can't be resold if building for a CDROM.
#
# Don't build a port if it's restricted and we don't want to get
# into that.
#
# Don't build a port if it's broken.
#
# Don't build a port if it comes with the base system.
################################################################
.if !defined(NO_IGNORE)
.if (defined(IS_INTERACTIVE) && defined(BATCH))
IGNORE= "is an interactive port"
.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
IGNORE= "is not an interactive port"
.elif (defined(REQUIRES_MOTIF) && !defined(HAVE_MOTIF))
IGNORE= "requires Motif"
.elif (defined(MOTIF_ONLY) && !defined(REQUIRES_MOTIF))
IGNORE= "does not require Motif"
.elif (defined(NO_CDROM) && defined(FOR_CDROM))
IGNORE= "may not be placed on a CDROM: ${NO_CDROM}"
.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
IGNORE= "is restricted: ${RESTRICTED}"
.elif ((defined(USE_IMAKE) || defined(USE_X11)) && !exists(${X11BASE}))
IGNORE= "uses X11, but ${X11BASE} not found"
.elif defined(BROKEN)
IGNORE= "is marked as broken: ${BROKEN}"
.elif defined(ONLY_FOR_ARCHS)
.for __ARCH in ${ONLY_FOR_ARCHS}
.if (${MACHINE_ARCH} == "${__ARCH}") || (${ARCH} == "${__ARCH}")
__ARCH_OK= 1
.endif
.endfor
.if !defined(__ARCH_OK)
.if ${MACHINE_ARCH} == "${ARCH}"
IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE_ARCH}"
.else
IGNORE= "is only for ${ONLY_FOR_ARCHS}, not ${MACHINE_ARCH} \(${ARCH}\)"
.endif
.endif
.elif defined(COMES_WITH)
.if ( ${OPSYS_VER} >= ${COMES_WITH} )
IGNORE= "-- ${PKGNAME:C/-[0-9].*//g} comes with ${OPSYS} as of release ${COMES_WITH}"
.endif
.endif
.if defined(IGNORE)
.if defined(IGNORE_SILENT)
IGNORECMD= ${DO_NADA}
.else
IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} ${IGNORE}."
.endif
fetch:
@${IGNORECMD}
checksum:
@${IGNORECMD}
extract:
@${IGNORECMD}
patch:
@${IGNORECMD}
configure:
@${IGNORECMD}
all:
@${IGNORECMD}
build:
@${IGNORECMD}
install:
@${IGNORECMD}
uninstall deinstall:
@${IGNORECMD}
package:
@${IGNORECMD}
.endif # IGNORE
.endif # !NO_IGNORE
.if defined(ALL_HOOK)
all:
@cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} WRKBUILD=${WRKBUILD}\
PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
DEPENDS="${DEPENDS}" BUILD_DEPENDS="${BUILD_DEPENDS}" \
RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \
${ALL_HOOK}
.endif
.if !target(all)
all: build
.endif
.if !defined(DEPENDS_TARGET)
.if make(reinstall)
DEPENDS_TARGET= reinstall
.else
DEPENDS_TARGET= install
.endif
.endif
################################################################
# The following are used to create easy dummy targets for
# disabling some bit of default target behavior you don't want.
# They still check to see if the target exists, and if so don't
# do anything, since you might want to set this globally for a
# group of ports in a Makefile.inc, but still be able to
# override from an individual Makefile.
################################################################
# Disable checksum
.if defined(NO_CHECKSUM)
.for _TARGET in checksum makesum addsum
.if !target(${_TARGET})
${_TARGET}: fetch
@${DO_NADA}
.endif
.endfor
.endif
# Disable extract
.if defined(NO_EXTRACT) && !target(extract)
extract:
@${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
checksum makesum addsum: fetch
@${DO_NADA}
.endif
# Disable patch
.if defined(NO_PATCH) && !target(patch)
patch: extract
@${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif
# Disable configure
.if defined(NO_CONFIGURE) && !target(configure)
configure: patch
@${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
# Disable build
.if defined(NO_BUILD) && !target(build)
build: configure
@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
# Disable install
.if defined(NO_INSTALL) && !target(install)
install: build
@${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
# Disable package
.if defined(NO_PACKAGE) && !target(package)
package:
.if defined(IGNORE_SILENT)
@${DO_NADA}
.else
@${ECHO_MSG} "===> ${PKGNAME} may not be packaged: ${NO_PACKAGE}."
.endif
.endif
# Disable describe
.if defined(NO_DESCRIBE) && !target(describe)
describe:
@${DO_NADA}
.endif
################################################################
# More standard targets start here.
#
# These are the body of the build/install framework. If you are
# not happy with the default actions, and you can't solve it by
# adding pre-* or post-* targets/scripts, override these.
################################################################
# Fetch
.if !target(do-fetch)
do-fetch:
@${MKDIR} ${_DISTDIR}
@(cd ${_DISTDIR}; \
for file in ${DISTFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
${ECHO_MSG} ">> Please correct this problem and try again."; \
exit 1; \
fi ; \
if [ ! -z ${CDROM_COPY} ]; then \
if ${CDROM_COPY} ${CDROM_OPT} ${CDROM_SITE}/$$file .; then \
continue; \
fi ; \
fi ; \
${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
if [ ! -w ${_DISTDIR}/. ]; then \
${ECHO_MSG} ">> Can't download to ${_DISTDIR} (permission denied?)."; \
exit 1; \
fi; \
for site in ${MASTER_SITES}; do \
${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
continue 2; \
fi \
done; \
${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
exit 1; \
fi \
done)
.if defined(PATCHFILES)
@(cd ${_DISTDIR}; \
for file in ${PATCHFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
if [ -h $$file -o -h `${BASENAME} $$file` ]; then \
${ECHO_MSG} ">> ${_DISTDIR}/$$file is a broken symlink."; \
${ECHO_MSG} ">> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
${ECHO_MSG} ">> Please correct this problem and try again."; \
exit 1; \
fi ; \
${ECHO_MSG} ">> $$file doesn't seem to exist on this system."; \
for site in ${PATCH_SITES}; do \
${ECHO_MSG} ">> Attempting to fetch from $${site}."; \
if ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} ${FETCH_AFTER_ARGS}; then \
continue 2; \
fi \
done; \
${ECHO_MSG} ">> Couldn't fetch it - please try to retrieve this";\
${ECHO_MSG} ">> port manually into ${_DISTDIR} and try again."; \
exit 1; \
fi \
done)
.endif
.endif
# This is for the use of sites which store distfiles which others may
# fetch - only fetch the distfile if it is allowed to be
# re-distributed freely
mirror-distfiles:
.if (${MIRROR_DISTFILE} == "yes")
@make fetch __ARCH_OK=yes NO_IGNORE=yes NO_WARNINGS=yes
.endif
# list the distribution and patch files used by a port. Typical
# use is make ECHO_MSG=: list-distfiles | tee some-file
#
list-distfiles:
@echo "${PKGNAME}"
@for file in ${DISTFILES} ${PATCHFILES}; do \
if [ "$$file" != "${EXTRACT_SUFX}" ]; then \
if [ -z "${DIST_SUBDIR}" ]; then \
printf "\t$$file\n"; \
else \
printf "\t${DIST_SUBDIR}/$$file\n"; \
fi \
fi \
done
@echo ""
# Obj
#
.if !target(obj)
obj:
.if !defined(NO_WRKDIR)
.if defined(WRKOBJDIR)
@${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR}
@${MKDIR} -p ${WRKOBJDIR}/${PORTSUBDIR}
@if [ ! -L ${WRKDIR} ] || \
[ X`${READLINK} ${WRKDIR}` != X${WRKOBJDIR}/${PORTSUBDIR} ]; then \
echo "${WRKDIR} -> ${WRKOBJDIR}/${PORTSUBDIR}"; \
${RM} -f ${WRKDIR}; \
${LN} -sf ${WRKOBJDIR}/${PORTSUBDIR} ${WRKDIR}; \
fi
.else
@${ECHO_MSG} ">>"
@${ECHO_MSG} ">> Please set the WRKOBJDIR variable before using 'make obj'"
@${ECHO_MSG} ">>"
@exit 1;
.endif
.endif
.endif
# Extract
.if !target(do-extract)
do-extract:
.if !defined(NO_WRKDIR)
.if defined(WRKOBJDIR)
@${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR}
@${MKDIR} -p ${WRKOBJDIR}/${PORTSUBDIR}
@if [ ! -L ${WRKDIR} ] || \
[ X`${READLINK} ${WRKDIR}` != X${WRKOBJDIR}/${PORTSUBDIR} ]; then \
echo "${WRKDIR} -> ${WRKOBJDIR}/${PORTSUBDIR}"; \
${RM} -f ${WRKDIR}; \
${LN} -sf ${WRKOBJDIR}/${PORTSUBDIR} ${WRKDIR}; \
fi
.else
@${RM} -rf ${WRKDIR}
@${MKDIR} ${WRKDIR}
.endif
.endif
@for file in ${EXTRACT_ONLY}; do \
if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
then \
exit 1; \
fi \
done
.endif
# Patch
.if !target(do-patch)
do-patch:
.if defined(PATCHFILES)
@${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}"
@(cd ${_DISTDIR}; \
for i in ${PATCHFILES}; do \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying distribution patch $$i" ; \
fi; \
case $$i in \
*.Z|*.gz) \
${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \
;; \
*) \
${PATCH} ${PATCH_DIST_ARGS} < $$i; \
;; \
esac; \
done)
.endif
@if [ -d ${PATCHDIR} ]; then \
(cd ${PATCHDIR}; \
for i in ${PATCH_LIST}; do \
case $$i in \
*.orig|*.rej|*~) \
${ECHO_MSG} "===> Ignoring patchfile $$i" ; \
;; \
*) \
if [ -e $$i ]; then \
if [ ${PATCH_DEBUG_TMP} = yes ]; then \
${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \
fi; \
${PATCH} ${PATCH_ARGS} < $$i; \
else \
${ECHO_MSG} "===> Can't find patch matching $$i"; \
if [ -d ${PATCHDIR}/CVS -a "$$i" = \
"${PATCHDIR}/patch-*" ]; then \
${ECHO_MSG} "===> Perhaps you forgot the -P flag to cvs co or update?"; \
fi; \
fi; \
;; \
esac; \
done) \
fi
.endif
# Configure
.if !target(do-configure)
do-configure: ${WRKBUILD}
.if defined(USE_AUTOCONF)
@cd ${AUTOCONF_DIR} && ${SETENV} ${AUTOCONF_ENV} ${AUTOCONF}
.endif
@if [ -f ${SCRIPTDIR}/configure ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/configure; \
fi
.if defined(HAS_CONFIGURE)
@(cd ${WRKBUILD} && CC="${CC}" ac_cv_path_CC="${CC}" CFLAGS="${CFLAGS}" \
CXX="${CXX}" ac_cv_path_CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
INSTALL="/usr/bin/install -c -o ${BINOWN} -g ${BINGRP}" \
INSTALL_PROGRAM="${INSTALL_PROGRAM}" INSTALL_MAN="${INSTALL_MAN}" \
INSTALL_SCRIPT="${INSTALL_SCRIPT}" INSTALL_DATA="${INSTALL_DATA}" \
${CONFIGURE_ENV} ${_CONFIGURE_SCRIPT} ${CONFIGURE_ARGS})
.endif
.if defined(USE_IMAKE)
@(cd ${WRKSRC} && ${SETENV} ${MAKE_ENV} ${XMKMF})
.endif
.endif
${WRKBUILD}:
${MKDIR} ${WRKBUILD}
# Build
.if !target(do-build)
do-build:
@(cd ${WRKBUILD}; ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} ${MAKEFILE} ${ALL_TARGET})
.endif
# Install
.if !target(do-install)
do-install:
@(cd ${WRKBUILD} && ${SETENV} ${MAKE_ENV} ${MAKE_PROGRAM} ${MAKE_FLAGS} ${MAKEFILE} ${INSTALL_TARGET})
.endif
# Package
.if !target(do-package)
do-package:
@if [ -e ${PLIST} ]; then \
${ECHO_MSG} "===> Building package for ${PKGNAME}"; \
if [ -d ${PACKAGES} ]; then \
if [ ! -d ${PKGREPOSITORY} ]; then \
if ! ${MKDIR} ${PKGREPOSITORY}; then \
${ECHO_MSG} ">> Can't create directory ${PKGREPOSITORY}."; \
exit 1; \
fi; \
fi; \
fi; \
if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \
if [ -d ${PACKAGES} ]; then \
${MAKE} ${.MAKEFLAGS} package-links; \
fi; \
else \
${MAKE} ${.MAKEFLAGS} delete-package; \
exit 1; \
fi; \
fi
.endif
# Some support rules for do-package
.if !target(package-links)
package-links:
@${MAKE} ${.MAKEFLAGS} delete-package-links
@for cat in ${CATEGORIES}; do \
if [ ! -d ${PACKAGES}/$$cat ]; then \
if ! ${MKDIR} ${PACKAGES}/$$cat; then \
${ECHO_MSG} ">> Can't create directory ${PACKAGES}/$$cat."; \
exit 1; \
fi; \
fi; \
ln -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
done;
.endif
.if !target(delete-package-links)
delete-package-links:
@${RM} -f ${PACKAGES}/[a-z]*/${PKGNAME}${PKG_SUFX};
.endif
.if !target(delete-package)
delete-package:
@${MAKE} ${.MAKEFLAGS} delete-package-links
@${RM} -f ${PKGFILE}
.endif
################################################################
# This is the "generic" port target, actually a macro used from the
# six main targets. See below for more.
################################################################
_PORT_USE: .USE
.if make(real-fetch)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
.endif
.if make(real-extract)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends lib-depends misc-depends
.endif
.if make(real-install)
.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
@if [ -d ${PKG_DBDIR}/${PKGNAME} -o "X$$(ls -d ${PKG_DBDIR}/${PKGNAME:C/-[0-9].*//g}-* 2> /dev/null)" != "X" ]; then \
${ECHO_MSG} "===> ${PKGNAME} is already installed - perhaps an older version?"; \
${ECHO_MSG} " If so, you may wish to \`\`make deinstall'' and install"; \
${ECHO_MSG} " this port again by \`\`make reinstall'' to upgrade it properly."; \
${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGNAME}"; \
${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
${ECHO_MSG} " in your environment or the \"make install\" command line."; \
exit 1; \
fi
.endif
@if [ `${SH} -c umask` != ${DEF_UMASK} ]; then \
${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \
${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \
${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \
fi
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends lib-depends
.endif
.if make(real-install)
@touch ${INSTALL_PRE_COOKIE}
.if !defined(NO_MTREE)
@if [ `id -u` = 0 ]; then \
if [ ! -f ${MTREE_FILE} ]; then \
${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \
exit 1; \
else \
if [ ! -d ${PREFIX} ]; then \
mkdir -p ${PREFIX}; \
fi; \
${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/; \
fi; \
else \
${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
${ECHO_MSG} "Become root and try again to ensure correct permissions."; \
fi
.endif
.endif
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/pre-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/pre-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/^real-/pre-/}; \
fi
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/do-/}
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} ${.TARGET:S/^real-/post-/}
@if [ -f ${SCRIPTDIR}/${.TARGET:S/^real-/post-/} ]; then \
cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
${SCRIPTDIR}/${.TARGET:S/^real-/post-/}; \
fi
.if make(real-install) && (defined(_MANPAGES) || defined(_CATPAGES))
.if defined(MANCOMPRESSED) && defined(NOMANCOMPRESS)
@${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}"
.for manpage in ${_MANPAGES} ${_CATPAGES}
@${GUNZIP_CMD} ${manpage}.gz
.endfor
.elif !defined(MANCOMPRESSED) && !defined(NOMANCOMPRESS)
@${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}"
.for manpage in ${_MANPAGES} ${_CATPAGES}
@if [ -L ${manpage} ]; then \
set - `${FILE} ${manpage}`; \
shift `${EXPR} $$# - 1`; \
${LN} -sf $${1}.gz ${manpage}.gz; \
${RM} ${manpage}; \
else \
${GZIP_CMD} ${manpage}; \
fi
.endfor
.endif
.endif
.if make(real-install) && exists(${PKGDIR}/MESSAGE)
@${CAT} ${PKGDIR}/MESSAGE
.endif
.if make(real-install) && !defined(NO_PKG_REGISTER)
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fake-pkg
.endif
.if make(real-extract)
@${TOUCH} ${TOUCH_FLAGS} ${EXTRACT_COOKIE}
.endif
.if make(real-patch) && !defined(PATCH_CHECK_ONLY)
@${TOUCH} ${TOUCH_FLAGS} ${PATCH_COOKIE}
.endif
.if make(real-configure)
@${TOUCH} ${TOUCH_FLAGS} ${CONFIGURE_COOKIE}
.endif
.if make(real-install)
@${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE}
.endif
.if make(real-build)
@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
.endif
.if make(real-package) && !defined(PACKAGE_NOINSTALL)
@${TOUCH} ${TOUCH_FLAGS} ${PACKAGE_COOKIE}
.endif
################################################################
# Skeleton targets start here
#
# You shouldn't have to change these. Either add the pre-* or
# post-* targets/scripts or redefine the do-* targets. These
# targets don't do anything other than checking for cookies and
# call the necessary targets/scripts.
################################################################
.if !target(fetch)
fetch:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-fetch
.endif
.if !target(extract)
extract: ${EXTRACT_COOKIE}
.endif
.if !target(patch)
patch: extract ${PATCH_COOKIE}
.endif
.if !target(configure)
configure: patch ${CONFIGURE_COOKIE}
.endif
.if !target(build)
build: configure ${BUILD_COOKIE}
.endif
.if !target(install)
install: build ${INSTALL_COOKIE}
.endif
.if !target(package)
package: install ${PACKAGE_COOKIE}
.endif
${EXTRACT_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} checksum real-extract
${PATCH_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-patch
${CONFIGURE_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-configure
${BUILD_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-build
${INSTALL_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-install
${PACKAGE_COOKIE}:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} real-package
# And call the macros
real-fetch: _PORT_USE
real-extract: _PORT_USE
@${ECHO_MSG} "===> Extracting for ${PKGNAME}"
real-patch: _PORT_USE
@${ECHO_MSG} "===> Patching for ${PKGNAME}"
real-configure: _PORT_USE
@${ECHO_MSG} "===> Configuring for ${PKGNAME}"
real-build: _PORT_USE
@${ECHO_MSG} "===> Building for ${PKGNAME}"
real-install: _PORT_USE
@${ECHO_MSG} "===> Installing for ${PKGNAME}"
real-package: _PORT_USE
# Empty pre-* and post-* targets, note we can't use .if !target()
# in the _PORT_USE macro
.for name in fetch extract patch configure build install package
.if !target(pre-${name})
pre-${name}:
@${DO_NADA}
.endif
.if !target(post-${name})
post-${name}:
@${DO_NADA}
.endif
.endfor
# Checkpatch
#
# Special target to verify patches
.if !target(checkpatch)
checkpatch:
@cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${.MAKEFLAGS} patch
.endif
# Reinstall
#
# Special target to re-run install
.if !target(reinstall)
reinstall:
@${RM} -f ${INSTALL_PRE_COOKIE} ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
@DEPENDS_TARGET=${DEPENDS_TARGET} ${MAKE} install
.endif
# Deinstall
#
# Special target to remove installation
.if !target(deinstall)
uninstall deinstall:
@${ECHO_MSG} "===> Deinstalling for ${PKGNAME}"
@${PKG_DELETE} -f ${PKGNAME}
@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
.endif
################################################################
# Some more targets supplied for users' convenience
################################################################
# Cleaning up
.if !target(pre-clean)
pre-clean:
@${DO_NADA}
.endif
.if !target(clean)
clean: pre-clean
.if !defined(NOCLEANDEPENDS)
@${MAKE} clean-depends
.endif
@${ECHO_MSG} "===> Cleaning for ${PKGNAME}"
.if !defined(NO_WRKDIR)
.if defined(WRKOBJDIR)
@${RM} -rf ${WRKOBJDIR}/${PORTSUBDIR}
@${RM} -f ${WRKDIR}
.else
@if [ -d ${WRKDIR} ]; then \
if [ -w ${WRKDIR} ]; then \
${RM} -rf ${WRKDIR}; \
else \
${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \
fi; \
fi
.endif
.else
@${RM} -f ${WRKDIR}/.*_done
.endif
.endif
.if !target(pre-distclean)
pre-distclean:
@${DO_NADA}
.endif
.if !target(distclean)
distclean: pre-distclean clean
@${ECHO_MSG} "===> Dist cleaning for ${PKGNAME}"
@(if [ -d ${_DISTDIR} ]; then \
cd ${_DISTDIR}; \
${RM} -f ${DISTFILES} ${PATCHFILES}; \
fi)
.if defined(DIST_SUBDIR)
-@${RMDIR} ${_DISTDIR}
.endif
.endif
# Prints out a list of files to fetch (useful to do a batch fetch)
# are we called from bsd.port.subdir.mk (i.e. do we scan all dirs anyways)? XXX
.ifdef(DIRPRFX)
RECURSIVE_FETCH_LIST?= NO
.else
RECURSIVE_FETCH_LIST?= YES
.endif
.if !target(fetch-list)
fetch-list:
@${MAKE} fetch-list-recursive RECURSIVE_FETCH_LIST=${RECURSIVE_FETCH_LIST} | sort -u
.endif # !target(fetch-list)
.if !target(fetch-list-recursive)
fetch-list-recursive:
@${MAKE} fetch-list-one-pkg
.if ${RECURSIVE_FETCH_LIST} != "NO"
@for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
(cd $$dir; ${MAKE} fetch-list-recursive; ); \
done
.endif # ${RECURSIVE_FETCH_LIST} != "NO"
.endif # !target(fetch-list-recursive)
.if !target(fetch-list-one-pkg)
fetch-list-one-pkg:
@${MKDIR} ${_DISTDIR}
@[ -z "${_DISTDIR}" ] || ${ECHO} "${MKDIR} ${_DISTDIR}"
@(cd ${_DISTDIR}; \
for file in ${DISTFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f `${BASENAME} $$file` ] || " ; \
for site in ${MASTER_SITES} ; do \
${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| ' ; \
done; \
${ECHO} "echo $${file} not fetched" ; \
fi \
done)
.if defined(PATCHFILES)
@(cd ${_DISTDIR}; \
for file in ${PATCHFILES}; do \
if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \
${ECHO} -n "cd ${_DISTDIR} && [ -f $$file -o -f `${BASENAME} $$file` ] || " ; \
for site in ${PATCH_SITES}; do \
${ECHO} -n ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${site}$${file} "${FETCH_AFTER_ARGS}" '|| ' ; \
done; \
${ECHO} "echo $${file} not fetched" ; \
fi \
done)
.endif # defined(PATCHFILES)
.endif # !target(fetch-list-one-pkg)
# Checksumming utilities
.if !target(makesum)
makesum: fetch
@${MKDIR} ${FILESDIR}
@if [ -f ${CHECKSUM_FILE} ]; then ${RM} -f ${CHECKSUM_FILE}; fi
@(cd ${DISTDIR}; \
for file in ${_CKSUMFILES}; do \
for cipher in ${CIPHERS:R}; do \
$$cipher $$file >> ${CHECKSUM_FILE}; \
done; \
done)
@for file in ${_IGNOREFILES}; do \
${ECHO} "MD5 ($$file) = IGNORE" >> ${CHECKSUM_FILE}; \
done
.endif
.if !target(addsum)
addsum: fetch
@${MKDIR} ${FILESDIR}
@touch ${CHECKSUM_FILE}
@(cd ${DISTDIR}; \
for file in ${_CKSUMFILES}; do \
for cipher in ${CIPHERS:R}; do \
$$cipher $$file >> ${CHECKSUM_FILE}; \
done; \
done)
@for file in ${_IGNOREFILES}; do \
${ECHO} "MD5 ($$file) = IGNORE" >> ${CHECKSUM_FILE}; \
done
@sort -u ${CHECKSUM_FILE} >${CHECKSUM_FILE}.new
@${MV} -f ${CHECKSUM_FILE}.new ${CHECKSUM_FILE}
@if [ `${SED} -e 's/\=.*$$//' ${CHECKSUM_FILE} | uniq -d | wc -l` -ne 0 ]; then \
${ECHO} "Inconsistent checksum in ${CHECKSUM_FILE}"; \
${FALSE}; \
else \
${ECHO} "${CHECKSUM_FILE} updated okay, don't forget to remove cruft"; \
fi
.endif
.if !target(checksum)
checksum: fetch
@if [ ! -f ${CHECKSUM_FILE} ]; then \
${ECHO_MSG} ">> No checksum file."; \
else \
(cd ${DISTDIR}; OK="true"; \
for file in ${_CKSUMFILES}; do \
for cipher_sig in ${PREFERRED_CIPHERS}; do \
sig=`${EXPR} $$cipher_sig : '.*\.\(.*\)'`; \
CKSUM2=`${GREP} "^$$sig ($$file)" ${CHECKSUM_FILE} | ${AWK} '{print $$4}'`; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} ">> No $$sig checksum recorded for $$file."; \
else \
cipher=`${EXPR} $$cipher_sig : '\(.*\)\.'`; \
break; \
fi; \
done; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} ">> No checksum recorded for $$file."; \
OK="false"; \
elif [ "$$CKSUM2" = "IGNORE" ]; then \
${ECHO_MSG} ">> Checksum for $$file is set to IGNORE in md5 file even though"; \
${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
else \
CKSUM=`$$cipher < $$file`; \
if [ "$$CKSUM" = "$$CKSUM2" ]; then \
${ECHO_MSG} ">> Checksum OK for $$file. ($$sig)"; \
else \
${ECHO_MSG} ">> Checksum mismatch for $$file. ($$sig)"; \
OK="false"; \
fi; \
fi; \
done; \
for file in ${_IGNOREFILES}; do \
CKSUM2=`${GREP} "($$file)" ${CHECKSUM_FILE} | ${AWK} '{print $$4}'`; \
if [ "$$CKSUM2" = "" ]; then \
${ECHO_MSG} ">> No checksum recorded for $$file, file is in "'$$'"{IGNOREFILES} list."; \
OK="false"; \
elif [ "$$CKSUM2" != "IGNORE" ]; then \
${ECHO_MSG} ">> Checksum for $$file is not set to IGNORE in md5 file even though"; \
${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \
OK="false"; \
fi; \
done; \
if [ "$$OK" != "true" ]; then \
${ECHO_MSG} "Make sure the Makefile and checksum file (${CHECKSUM_FILE})"; \
${ECHO_MSG} "are up to date. If you want to override this check, type"; \
${ECHO_MSG} "\"make NO_CHECKSUM=yes [other args]\"."; \
exit 1; \
fi) ; \
fi
.endif
# packing list utilities. This generates a packing list from a recently
# installed port. Not perfect, but pretty close. The generated file
# will have to have some tweaks done by hand.
# Note: add @comment PACKAGE(arch=${ARCH}, opsys=${OPSYS}, vers=${OPSYS_VER})
# when port is installed or package created.
#
.if !target(plist)
plist: install
@${MKDIR} ${PKGDIR}
@(dirs=""; \
ld=""; \
for f in `find ${PREFIX} -newer ${INSTALL_PRE_COOKIE} -print 2> /dev/null`; do \
ff=`${ECHO} $$f | ${SED} -e 's|^${PREFIX}/||'`; \
if [ -d $$f -a ! -h $$f ]; then dirs="$$ff $$dirs"; \
else \
${ECHO} $$ff; \
if ${ECHO} $$f | ${GREP} -E -q -e '[^/]+\.so\.[0-9]+\.[0-9]+$$'; then \
ld="$$LDCONFIG `${DIRNAME} $$f`"; \
fi; \
fi; \
done; \
for f in $$dirs; do \
if ${GREP} -q -e `${BASENAME} $$f` ${MTREE_FILE}; then \
:; \
else \
${ECHO} "@dirrm $$f"; \
fi; \
done; \
for f in $$ld; do ${ECHO} "@exec ${LDCONFIG} -m $$f"; done; \
) > ${PLIST}-auto
.endif
################################################################
# The special package-building targets
# You probably won't need to touch these
################################################################
HTMLIFY= ${SED} -e 's/&/\&amp;/g' -e 's/>/\&gt;/g' -e 's/</\&lt;/g'
# Set to YES by the README.html target (and passed via depends-list
# and package-depends)
.ifndef PACKAGE_NAME_AS_LINK
PACKAGE_NAME_AS_LINK=NO
.endif # PACKAGE_NAME_AS_LINK
# Nobody should want to override this unless PKGNAME is simply bogus.
.if !target(package-name)
package-name:
.if (${PACKAGE_NAME_AS_LINK} == "YES")
@${ECHO} '<A HREF="../../'`${MAKE} package-path | ${HTMLIFY}`'/README.html">'`echo ${PKGNAME} | ${HTMLIFY}`'</A>'
.else
@${ECHO} '${PKGNAME}'
.endif # PACKAGE_NAME_AS_LINK != ""
.endif # !target(package-name)
.if !target(package-path)
package-path:
@pwd | sed s@`cd ${PORTSDIR} ; pwd`/@@g
.endif
# Show (recursively) all the packages this package depends on.
.if !target(package-depends)
package-depends:
@for dir in `${ECHO} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
if [ -d $$dir ]; then \
(cd $$dir ; ${MAKE} package-name package-depends PACKAGE_NAME_AS_LINK=${PACKAGE_NAME_AS_LINK}); \
else \
${ECHO_MSG} "Warning: \"$$dir\" non-existent -- @pkgdep registration incomplete" >&2; \
fi; \
done
.endif
# Build a package but don't check the package cookie
.if !target(repackage)
repackage: pre-repackage package
pre-repackage:
@${RM} -f ${PACKAGE_COOKIE}
.endif
# Build a package but don't check the cookie for installation, also don't
# install package cookie
.if !target(package-noinstall)
package-noinstall:
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} PACKAGE_NOINSTALL=yes real-package
.endif
################################################################
# Dependency checking
################################################################
.if !target(depends)
depends: lib-depends misc-depends
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} fetch-depends
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} build-depends
@cd ${.CURDIR} && ${MAKE} ${.MAKEFLAGS} run-depends
.if make(fetch-depends)
DEPENDS_TMP+= ${FETCH_DEPENDS}
.endif
.if make(build-depends)
DEPENDS_TMP+= ${BUILD_DEPENDS}
.endif
.if make(run-depends)
DEPENDS_TMP+= ${RUN_DEPENDS}
.endif
_DEPENDS_USE: .USE
.if defined(DEPENDS_TMP)
.if !defined(NO_DEPENDS)
@PATH=${PORTPATH}; \
for i in ${DEPENDS_TMP}; do \
prog=`${ECHO} $$i | ${SED} -e 's/:.*//'`; \
dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
else \
target=${DEPENDS_TARGET}; \
fi; \
found=not; \
if ${EXPR} "$$prog" : \\/ >/dev/null; then \
if [ -e "$$prog" ]; then \
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \
found=""; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \
fi; \
else \
for d in `echo $$PATH | tr ':' ' '`; do \
if [ -x $$d/$$prog ]; then \
found="$$d/$$prog"; \
break; \
fi \
done; \
${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - $$found found"; \
fi; \
if [ X"$$found" = Xnot ]; then \
${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} ">> No directory for $$prog. Skipping.."; \
else \
(cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
fi; \
fi; \
done
.endif
.else
@${DO_NADA}
.endif
fetch-depends: _DEPENDS_USE
build-depends: _DEPENDS_USE
run-depends: _DEPENDS_USE
lib-depends:
.if defined(LIB_DEPENDS)
.if !defined(NO_DEPENDS)
.if defined(NO_SHARED_LIBS)
@for i in ${LIB_DEPENDS}; do \
lib=`${ECHO} $$i | ${SED} -e 's/:.*//' -e 's|\([^\\]\)[\\\.].*|\1|'`; \
dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
else \
target=${DEPENDS_TARGET}; \
fi; \
tmp=`mktemp /tmp/bpmXXXXXXXXXX`; \
if ${LD} -r -o $$tmp -L${LOCALBASE}/lib -L${X11BASE}/lib -l$$lib; then \
${ECHO_MSG} "===> ${PKGNAME} depends on library: $$lib - found"; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on library: $$lib - not found"; \
${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} ">> No directory for $$lib. Skipping.."; \
else \
(cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
fi; \
fi; \
${RM} -f $$tmp; \
done
.else
@for i in ${LIB_DEPENDS}; do \
lib=`${ECHO} $$i | ${SED} -e 's/:.*//' -e 's|\([^\\]\)\.|\1\\\\.|g'`; \
dir=`${ECHO} $$i | ${SED} -e 's/[^:]*://'`; \
if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
else \
target=${DEPENDS_TARGET}; \
fi; \
libname=`${ECHO} $$lib | ${SED} -e 's|\\\\||g'`; \
reallib=`${LDCONFIG} -r | ${GREP} -e "-l$$lib" | awk '{ print $$3 }'`; \
if [ "X$$reallib" = X"" ]; then \
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$libname - not found"; \
${ECHO_MSG} "===> Verifying $$target for $$libname in $$dir"; \
if [ ! -d "$$dir" ]; then \
${ECHO_MSG} ">> No directory for $$libname. Skipping.."; \
else \
(cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; \
fi; \
else \
${ECHO_MSG} "===> ${PKGNAME} depends on shared library: $$libname - $$reallib found"; \
fi; \
done
.endif
.endif
.else
@${DO_NADA}
.endif
misc-depends:
.if defined(DEPENDS)
.if !defined(NO_DEPENDS)
@for dir in ${DEPENDS}; do \
if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
target=`${ECHO} $$dir | ${SED} -e 's/.*://'`; \
dir=`${ECHO} $$dir | ${SED} -e 's/:.*//'`; \
else \
target=${DEPENDS_TARGET}; \
fi; \
${ECHO_MSG} "===> ${PKGNAME} depends on: $$dir"; \
${ECHO_MSG} "===> Verifying $$target for $$dir"; \
if [ ! -d $$dir ]; then \
${ECHO_MSG} ">> No directory for $$dir. Skipping.."; \
else \
(cd $$dir; ${MAKE} ${.MAKEFLAGS} $$target) ; \
fi \
done
@${ECHO_MSG} "===> Returning to build of ${PKGNAME}"
.endif
.else
@${DO_NADA}
.endif
.endif
.if !target(clean-depends)
clean-depends:
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) \
|| defined(RUN_DEPENDS)
@for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u`; do \
if [ -d $$dir ] ; then \
(cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
fi \
done
.endif
.if defined(DEPENDS)
@for dir in `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
if [ -d $$dir ] ; then \
(cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean clean-depends); \
fi \
done
.endif
.endif
.if !target(depends-list)
depends-list:
@for dir in `${ECHO} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/^[^:]*://' -e 's/:.*//' | sort -u` `${ECHO} ${DEPENDS} | ${TR} '\040' '\012' | ${SED} -e 's/:.*//' | sort -u`; do \
(cd $$dir; ${MAKE} package-name depends-list PACKAGE_NAME_AS_LINK=${PACKAGE_NAME_AS_LINK}; ); \
done
.endif
################################################################
# Everything after here are internal targets and really
# shouldn't be touched by anybody but the release engineers.
################################################################
# This target generates an index entry suitable for aggregation into
# a large index. Format is:
#
# distribution-name|port-path|installation-prefix|comment| \
# description-file|maintainer|categories|build deps|run deps|for arch
#
.if !target(describe)
describe:
@${ECHO} -n "${PKGNAME}|${.CURDIR}|"; \
${ECHO} -n "${PREFIX}|"; \
if [ -f ${COMMENT} ]; then \
${ECHO} -n "`${CAT} ${COMMENT}`"; \
else \
${ECHO} -n "** No Description"; \
fi; \
if [ -f ${DESCR} ]; then \
${ECHO} -n "|${DESCR}"; \
else \
${ECHO} -n "|/dev/null"; \
fi; \
${ECHO} -n "|${MAINTAINER}|${CATEGORIES}|"; \
case "A${FETCH_DEPENDS}B${BUILD_DEPENDS}C${LIB_DEPENDS}D${DEPENDS}E" in \
ABCDE) ;; \
*) cd ${.CURDIR} && ${ECHO} -n `make depends-list|sort -u`;; \
esac; \
${ECHO} -n "|"; \
case "A${RUN_DEPENDS}B${LIB_DEPENDS}C${DEPENDS}D" in \
ABCD) ;; \
*) cd ${.CURDIR} && ${ECHO} -n `make package-depends|sort -u`;; \
esac; \
${ECHO} -n "|"; \
if [ "${ONLY_FOR_ARCHS}" = "" ]; then \
${ECHO} -n "any"; \
else \
${ECHO} -n "${ONLY_FOR_ARCHS}"; \
fi; \
${ECHO} ""
.endif
.if !target(readmes)
readmes: readme
.endif
.if !target(readme)
readme:
@rm -f README.html
@cd ${.CURDIR} && make README.html
.endif
README_NAME= ${TEMPLATES}/README.port
README.html:
@${ECHO_MSG} "===> Creating README.html for ${PKGNAME}"
@${MAKE} depends-list PACKAGE_NAME_AS_LINK=YES >> $@.tmp1
@[ -s $@.tmp1 ] || echo "(none)" >> $@.tmp1
@${MAKE} package-depends PACKAGE_NAME_AS_LINK=YES >> $@.tmp2
@[ -s $@.tmp2 ] || echo "(none)" >> $@.tmp2
@${ECHO} ${PKGNAME} | ${HTMLIFY} >> $@.tmp3
@${CAT} ${README_NAME} | \
${SED} -e 's|%%PORT%%|'"`${MAKE} package-path | ${HTMLIFY}`"'|g' \
-e '/%%PKG%%/r$@.tmp3' \
-e '/%%PKG%%/d' \
-e '/%%COMMENT%%/r${PKGDIR}/COMMENT' \
-e '/%%COMMENT%%/d' \
-e '/%%BUILD_DEPENDS%%/r$@.tmp1' \
-e '/%%BUILD_DEPENDS%%/d' \
-e '/%%RUN_DEPENDS%%/r$@.tmp2' \
-e '/%%RUN_DEPENDS%%/d' \
>> $@
@rm -f $@.tmp1 $@.tmp2 $@.tmp3
.if !target(print-depends-list)
print-depends-list:
.if defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || \
defined(LIB_DEPENDS) || defined(DEPENDS)
@${ECHO} -n 'This port requires package(s) "'
@${ECHO} -n `make depends-list | sort -u`
@${ECHO} '" to build.'
.endif
.endif
.if !target(print-package-depends)
print-package-depends:
.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) || defined(DEPENDS)
@${ECHO} -n 'This port requires package(s) "'
@${ECHO} -n `make package-depends | sort -u`
@${ECHO} '" to run.'
.endif
.endif
# Fake installation of package so that user can pkg_delete it later.
# Also, make sure that an installed port is recognized correctly in
# accordance to the @pkgdep directive in the packing lists
.if !target(fake-pkg)
fake-pkg:
@if [ ! -f ${PLIST} -o ! -f ${COMMENT} -o ! -f ${DESCR} ]; then ${ECHO} "** Missing package files for ${PKGNAME} - installation not recorded."; exit 1; fi
@if [ `/bin/ls -l ${COMMENT} | ${AWK} '{print $$5}'` -gt 60 ]; then \
${ECHO} "** ${COMMENT} too large - installation not recorded."; \
exit 1; \
fi
@if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
.if defined(FORCE_PKG_REGISTER)
@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
.endif
@if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \
${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
${CP} ${COMMENT} ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
if [ -f ${PKGDIR}/INSTALL ]; then \
${CP} ${PKGDIR}/INSTALL ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
fi; \
if [ -f ${PKGDIR}/DEINSTALL ]; then \
${CP} ${PKGDIR}/DEINSTALL ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
fi; \
if [ -f ${PKGDIR}/REQ ]; then \
${CP} ${PKGDIR}/REQ ${PKG_DBDIR}/${PKGNAME}/+REQ; \
fi; \
if [ -f ${PKGDIR}/MESSAGE ]; then \
${CP} ${PKGDIR}/MESSAGE ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
fi; \
for dep in `make package-depends ECHO_MSG=${TRUE} | sort -u`; do \
if [ -d ${PKG_DBDIR}/$$dep ]; then \
if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
>/dev/null 2>&1; then \
${ECHO} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
fi; \
fi; \
done; \
fi
.endif
# Depend is generally meaningless for arbitrary ports, but if someone wants
# one they can override this. This is just to catch people who've gotten into
# the habit of typing `make depend all install' as a matter of course.
#
.if !target(depend)
depend:
.endif
# Same goes for tags
.if !target(tags)
tags:
.endif
.PHONY: \
addsum all build build-depends checkpatch \
checksum clean clean-depends configure deinstall \
delete-package delete-package-links depend depends depends-list \
describe distclean do-build do-configure do-extract \
do-fetch do-install do-package do-patch extract list-distfiles \
fake-pkg fetch fetch-depends fetch-list fetch-list-one-pkg \
fetch-list-recursive install lib-depends makesum mirror-distfiles \
misc-depends package package-depends package-links package-name \
package-noinstall package-path patch plist post-build \
post-configure post-extract post-fetch post-install post-package \
post-patch pre-build pre-clean pre-configure pre-distclean \
pre-extract pre-fetch pre-install pre-package pre-patch \
pre-repackage print-depends-list print-package-depends readme \
readmes real-extract real-fetch real-install reinstall \
repackage run-depends tags uninstall
Reference in New Issue View Git Blame Copy Permalink