39 lines
1.6 KiB
Plaintext
39 lines
1.6 KiB
Plaintext
$OpenBSD: README,v 1.2 2018/09/04 12:46:23 espie Exp $
|
|
|
|
+-------------------------------------------------------------------------------
|
|
| Running ${PKGSTEM} on OpenBSD
|
|
+-------------------------------------------------------------------------------
|
|
|
|
Updating firmware on the SOFTIRON OverDrive 1000
|
|
------------------------------------------------
|
|
|
|
Firmware maintenance is normally locked on this machine. Enabling it requires
|
|
physical access: press maintenance button on rear panel ATX shield and hold
|
|
for 5 seconds to unlock for 10 minutes, or press and hold for 10 seconds to
|
|
unlock until the USB console is disconnected.
|
|
|
|
For typical use, unlock firmware updates as above, then:
|
|
|
|
+------------------------------------------------------------------------------
|
|
| # od1000_flasher --program --verify \
|
|
| ${PREFIX}/share/od1000_firmware/OVERDRIVE1000_ROM.fd --verbose --flash
|
|
| Opening the Overdrive 1000 flasher device.
|
|
| Holding Device in Reset.
|
|
| Erasing flash.
|
|
| Programming flash.
|
|
| [...]
|
|
| Verifying flash.
|
|
| [...]
|
|
| Done.
|
|
+------------------------------------------------------------------------------
|
|
|
|
It's also possible to update the EEPROM and PIC32 firmware.
|
|
See ${PREFIX}/share/od1000_firmware/README.txt and the SOFTIRON manuals,
|
|
e.g. http://cdn.softiron.com/OD1000_QSGv1.pdf
|
|
|
|
The current PIC32 firmware version is displayed in the attach message on the
|
|
host where the console is connected, for example the following message shows
|
|
that the machine is already at 1.02:
|
|
|
|
umodem1 at uhub1 port 2 configuration 1 interface 0 "SoftIron, Inc. OverDrive 1000" rev 2.00/1.02 addr 2
|